| .. SPDX-License-Identifier: GPL-2.0-or-later |
| |
| Kernel driver HTU31 |
| ==================== |
| |
| Supported chips: |
| |
| * Measurement Specialties HTU31 |
| |
| Prefix: 'htu31' |
| |
| Addresses scanned: - |
| |
| Datasheet: Publicly available from https://www.te.com/en/product-CAT-HSC0007.html |
| |
| Author: |
| |
| - Andrei Lalaev <andrey.lalaev@gmail.com> |
| |
| Description |
| ----------- |
| |
| HTU31 is a humidity and temperature sensor. |
| |
| Supported temperature range is from -40 to 125 degrees Celsius. |
| |
| Communication with the device is performed via I2C protocol. Sensor's default address |
| is 0x40. |
| |
| sysfs-Interface |
| --------------- |
| |
| =================== ================= |
| temp1_input: temperature input |
| humidity1_input: humidity input |
| heater_enable: heater control |
| =================== ================= |
