| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Copyright 2019 American Megatrends International LLC. | 
 |  * | 
 |  * Author: Karthikeyan Mani <karthikeyanm@amiindia.co.in> | 
 |  */ | 
 |  | 
 | #include <linux/bitfield.h> | 
 | #include <linux/cleanup.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/hashtable.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/string.h> | 
 |  | 
 | #define ASPEED_SGPIO_CTRL		0x54 | 
 |  | 
 | #define ASPEED_SGPIO_CLK_DIV_MASK	GENMASK(31, 16) | 
 | #define ASPEED_SGPIO_ENABLE		BIT(0) | 
 | #define ASPEED_SGPIO_PINS_SHIFT		6 | 
 |  | 
 | struct aspeed_sgpio_pdata { | 
 | 	const u32 pin_mask; | 
 | }; | 
 |  | 
 | struct aspeed_sgpio { | 
 | 	struct gpio_chip chip; | 
 | 	struct device *dev; | 
 | 	struct clk *pclk; | 
 | 	raw_spinlock_t lock; | 
 | 	void __iomem *base; | 
 | 	int irq; | 
 | }; | 
 |  | 
 | struct aspeed_sgpio_bank { | 
 | 	u16    val_regs; | 
 | 	u16    rdata_reg; | 
 | 	u16    irq_regs; | 
 | 	u16    tolerance_regs; | 
 | 	const char  names[4][3]; | 
 | }; | 
 |  | 
 | /* | 
 |  * Note: The "value" register returns the input value when the GPIO is | 
 |  *	 configured as an input. | 
 |  * | 
 |  *	 The "rdata" register returns the output value when the GPIO is | 
 |  *	 configured as an output. | 
 |  */ | 
 | static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = { | 
 | 	{ | 
 | 		.val_regs = 0x0000, | 
 | 		.rdata_reg = 0x0070, | 
 | 		.irq_regs = 0x0004, | 
 | 		.tolerance_regs = 0x0018, | 
 | 		.names = { "A", "B", "C", "D" }, | 
 | 	}, | 
 | 	{ | 
 | 		.val_regs = 0x001C, | 
 | 		.rdata_reg = 0x0074, | 
 | 		.irq_regs = 0x0020, | 
 | 		.tolerance_regs = 0x0034, | 
 | 		.names = { "E", "F", "G", "H" }, | 
 | 	}, | 
 | 	{ | 
 | 		.val_regs = 0x0038, | 
 | 		.rdata_reg = 0x0078, | 
 | 		.irq_regs = 0x003C, | 
 | 		.tolerance_regs = 0x0050, | 
 | 		.names = { "I", "J", "K", "L" }, | 
 | 	}, | 
 | 	{ | 
 | 		.val_regs = 0x0090, | 
 | 		.rdata_reg = 0x007C, | 
 | 		.irq_regs = 0x0094, | 
 | 		.tolerance_regs = 0x00A8, | 
 | 		.names = { "M", "N", "O", "P" }, | 
 | 	}, | 
 | }; | 
 |  | 
 | enum aspeed_sgpio_reg { | 
 | 	reg_val, | 
 | 	reg_rdata, | 
 | 	reg_irq_enable, | 
 | 	reg_irq_type0, | 
 | 	reg_irq_type1, | 
 | 	reg_irq_type2, | 
 | 	reg_irq_status, | 
 | 	reg_tolerance, | 
 | }; | 
 |  | 
 | #define GPIO_VAL_VALUE      0x00 | 
 | #define GPIO_IRQ_ENABLE     0x00 | 
 | #define GPIO_IRQ_TYPE0      0x04 | 
 | #define GPIO_IRQ_TYPE1      0x08 | 
 | #define GPIO_IRQ_TYPE2      0x0C | 
 | #define GPIO_IRQ_STATUS     0x10 | 
 |  | 
 | static void __iomem *bank_reg(struct aspeed_sgpio *gpio, | 
 | 				     const struct aspeed_sgpio_bank *bank, | 
 | 				     const enum aspeed_sgpio_reg reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case reg_val: | 
 | 		return gpio->base + bank->val_regs + GPIO_VAL_VALUE; | 
 | 	case reg_rdata: | 
 | 		return gpio->base + bank->rdata_reg; | 
 | 	case reg_irq_enable: | 
 | 		return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE; | 
 | 	case reg_irq_type0: | 
 | 		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0; | 
 | 	case reg_irq_type1: | 
 | 		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1; | 
 | 	case reg_irq_type2: | 
 | 		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2; | 
 | 	case reg_irq_status: | 
 | 		return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS; | 
 | 	case reg_tolerance: | 
 | 		return gpio->base + bank->tolerance_regs; | 
 | 	default: | 
 | 		/* acturally if code runs to here, it's an error case */ | 
 | 		BUG(); | 
 | 	} | 
 | } | 
 |  | 
 | #define GPIO_BANK(x)    ((x) >> 6) | 
 | #define GPIO_OFFSET(x)  ((x) & GENMASK(5, 0)) | 
 | #define GPIO_BIT(x)     BIT(GPIO_OFFSET(x) >> 1) | 
 |  | 
 | static const struct aspeed_sgpio_bank *to_bank(unsigned int offset) | 
 | { | 
 | 	unsigned int bank; | 
 |  | 
 | 	bank = GPIO_BANK(offset); | 
 |  | 
 | 	WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks)); | 
 | 	return &aspeed_sgpio_banks[bank]; | 
 | } | 
 |  | 
 | static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc, | 
 | 		unsigned long *valid_mask, unsigned int ngpios) | 
 | { | 
 | 	bitmap_set(valid_mask, 0, ngpios); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc, | 
 | 		unsigned long *valid_mask, unsigned int ngpios) | 
 | { | 
 | 	unsigned int i; | 
 |  | 
 | 	/* input GPIOs are even bits */ | 
 | 	for (i = 0; i < ngpios; i++) { | 
 | 		if (i % 2) | 
 | 			clear_bit(i, valid_mask); | 
 | 	} | 
 | } | 
 |  | 
 | static bool aspeed_sgpio_is_input(unsigned int offset) | 
 | { | 
 | 	return !(offset % 2); | 
 | } | 
 |  | 
 | static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset) | 
 | { | 
 | 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc); | 
 | 	const struct aspeed_sgpio_bank *bank = to_bank(offset); | 
 | 	enum aspeed_sgpio_reg reg; | 
 | 	int rc = 0; | 
 |  | 
 | 	guard(raw_spinlock_irqsave)(&gpio->lock); | 
 |  | 
 | 	reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata; | 
 | 	rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset)); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val) | 
 | { | 
 | 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc); | 
 | 	const struct aspeed_sgpio_bank *bank = to_bank(offset); | 
 | 	void __iomem *addr_r, *addr_w; | 
 | 	u32 reg = 0; | 
 |  | 
 | 	if (aspeed_sgpio_is_input(offset)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Since this is an output, read the cached value from rdata, then | 
 | 	 * update val. */ | 
 | 	addr_r = bank_reg(gpio, bank, reg_rdata); | 
 | 	addr_w = bank_reg(gpio, bank, reg_val); | 
 |  | 
 | 	reg = ioread32(addr_r); | 
 |  | 
 | 	if (val) | 
 | 		reg |= GPIO_BIT(offset); | 
 | 	else | 
 | 		reg &= ~GPIO_BIT(offset); | 
 |  | 
 | 	iowrite32(reg, addr_w); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val) | 
 | { | 
 | 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc); | 
 |  | 
 | 	guard(raw_spinlock_irqsave)(&gpio->lock); | 
 |  | 
 | 	return sgpio_set_value(gc, offset, val); | 
 | } | 
 |  | 
 | static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset) | 
 | { | 
 | 	return aspeed_sgpio_is_input(offset) ? 0 : -EINVAL; | 
 | } | 
 |  | 
 | static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val) | 
 | { | 
 | 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc); | 
 | 	int rc; | 
 |  | 
 | 	/* No special action is required for setting the direction; we'll | 
 | 	 * error-out in sgpio_set_value if this isn't an output GPIO */ | 
 |  | 
 | 	guard(raw_spinlock_irqsave)(&gpio->lock); | 
 |  | 
 | 	rc = sgpio_set_value(gc, offset, val); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset) | 
 | { | 
 | 	return !!aspeed_sgpio_is_input(offset); | 
 | } | 
 |  | 
 | static void irqd_to_aspeed_sgpio_data(struct irq_data *d, | 
 | 					struct aspeed_sgpio **gpio, | 
 | 					const struct aspeed_sgpio_bank **bank, | 
 | 					u32 *bit, int *offset) | 
 | { | 
 | 	struct aspeed_sgpio *internal; | 
 |  | 
 | 	*offset = irqd_to_hwirq(d); | 
 | 	internal = irq_data_get_irq_chip_data(d); | 
 | 	WARN_ON(!internal); | 
 |  | 
 | 	*gpio = internal; | 
 | 	*bank = to_bank(*offset); | 
 | 	*bit = GPIO_BIT(*offset); | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_ack(struct irq_data *d) | 
 | { | 
 | 	const struct aspeed_sgpio_bank *bank; | 
 | 	struct aspeed_sgpio *gpio; | 
 | 	void __iomem *status_addr; | 
 | 	int offset; | 
 | 	u32 bit; | 
 |  | 
 | 	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset); | 
 |  | 
 | 	status_addr = bank_reg(gpio, bank, reg_irq_status); | 
 |  | 
 | 	guard(raw_spinlock_irqsave)(&gpio->lock); | 
 |  | 
 | 	iowrite32(bit, status_addr); | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set) | 
 | { | 
 | 	const struct aspeed_sgpio_bank *bank; | 
 | 	struct aspeed_sgpio *gpio; | 
 | 	u32 reg, bit; | 
 | 	void __iomem *addr; | 
 | 	int offset; | 
 |  | 
 | 	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset); | 
 | 	addr = bank_reg(gpio, bank, reg_irq_enable); | 
 |  | 
 | 	/* Unmasking the IRQ */ | 
 | 	if (set) | 
 | 		gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(d)); | 
 |  | 
 | 	scoped_guard(raw_spinlock_irqsave, &gpio->lock) { | 
 | 		reg = ioread32(addr); | 
 | 		if (set) | 
 | 			reg |= bit; | 
 | 		else | 
 | 			reg &= ~bit; | 
 |  | 
 | 		iowrite32(reg, addr); | 
 | 	} | 
 |  | 
 | 	/* Masking the IRQ */ | 
 | 	if (!set) | 
 | 		gpiochip_disable_irq(&gpio->chip, irqd_to_hwirq(d)); | 
 |  | 
 |  | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_mask(struct irq_data *d) | 
 | { | 
 | 	aspeed_sgpio_irq_set_mask(d, false); | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_unmask(struct irq_data *d) | 
 | { | 
 | 	aspeed_sgpio_irq_set_mask(d, true); | 
 | } | 
 |  | 
 | static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type) | 
 | { | 
 | 	u32 type0 = 0; | 
 | 	u32 type1 = 0; | 
 | 	u32 type2 = 0; | 
 | 	u32 bit, reg; | 
 | 	const struct aspeed_sgpio_bank *bank; | 
 | 	irq_flow_handler_t handler; | 
 | 	struct aspeed_sgpio *gpio; | 
 | 	void __iomem *addr; | 
 | 	int offset; | 
 |  | 
 | 	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset); | 
 |  | 
 | 	switch (type & IRQ_TYPE_SENSE_MASK) { | 
 | 	case IRQ_TYPE_EDGE_BOTH: | 
 | 		type2 |= bit; | 
 | 		fallthrough; | 
 | 	case IRQ_TYPE_EDGE_RISING: | 
 | 		type0 |= bit; | 
 | 		fallthrough; | 
 | 	case IRQ_TYPE_EDGE_FALLING: | 
 | 		handler = handle_edge_irq; | 
 | 		break; | 
 | 	case IRQ_TYPE_LEVEL_HIGH: | 
 | 		type0 |= bit; | 
 | 		fallthrough; | 
 | 	case IRQ_TYPE_LEVEL_LOW: | 
 | 		type1 |= bit; | 
 | 		handler = handle_level_irq; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	scoped_guard(raw_spinlock_irqsave, &gpio->lock) { | 
 | 		addr = bank_reg(gpio, bank, reg_irq_type0); | 
 | 		reg = ioread32(addr); | 
 | 		reg = (reg & ~bit) | type0; | 
 | 		iowrite32(reg, addr); | 
 |  | 
 | 		addr = bank_reg(gpio, bank, reg_irq_type1); | 
 | 		reg = ioread32(addr); | 
 | 		reg = (reg & ~bit) | type1; | 
 | 		iowrite32(reg, addr); | 
 |  | 
 | 		addr = bank_reg(gpio, bank, reg_irq_type2); | 
 | 		reg = ioread32(addr); | 
 | 		reg = (reg & ~bit) | type2; | 
 | 		iowrite32(reg, addr); | 
 | 	} | 
 |  | 
 | 	irq_set_handler_locked(d, handler); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_handler(struct irq_desc *desc) | 
 | { | 
 | 	struct gpio_chip *gc = irq_desc_get_handler_data(desc); | 
 | 	struct irq_chip *ic = irq_desc_get_chip(desc); | 
 | 	struct aspeed_sgpio *data = gpiochip_get_data(gc); | 
 | 	unsigned int i, p; | 
 | 	unsigned long reg; | 
 |  | 
 | 	chained_irq_enter(ic, desc); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) { | 
 | 		const struct aspeed_sgpio_bank *bank = &aspeed_sgpio_banks[i]; | 
 |  | 
 | 		reg = ioread32(bank_reg(data, bank, reg_irq_status)); | 
 |  | 
 | 		for_each_set_bit(p, ®, 32) | 
 | 			generic_handle_domain_irq(gc->irq.domain, (i * 32 + p) * 2); | 
 | 	} | 
 |  | 
 | 	chained_irq_exit(ic, desc); | 
 | } | 
 |  | 
 | static void aspeed_sgpio_irq_print_chip(struct irq_data *d, struct seq_file *p) | 
 | { | 
 | 	const struct aspeed_sgpio_bank *bank; | 
 | 	struct aspeed_sgpio *gpio; | 
 | 	u32 bit; | 
 | 	int offset; | 
 |  | 
 | 	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset); | 
 | 	seq_puts(p, dev_name(gpio->dev)); | 
 | } | 
 |  | 
 | static const struct irq_chip aspeed_sgpio_irq_chip = { | 
 | 	.irq_ack = aspeed_sgpio_irq_ack, | 
 | 	.irq_mask = aspeed_sgpio_irq_mask, | 
 | 	.irq_unmask = aspeed_sgpio_irq_unmask, | 
 | 	.irq_set_type = aspeed_sgpio_set_type, | 
 | 	.irq_print_chip = aspeed_sgpio_irq_print_chip, | 
 | 	.flags = IRQCHIP_IMMUTABLE, | 
 | 	GPIOCHIP_IRQ_RESOURCE_HELPERS, | 
 | }; | 
 |  | 
 | static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio, | 
 | 				   struct platform_device *pdev) | 
 | { | 
 | 	int rc, i; | 
 | 	const struct aspeed_sgpio_bank *bank; | 
 | 	struct gpio_irq_chip *irq; | 
 |  | 
 | 	rc = platform_get_irq(pdev, 0); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	gpio->irq = rc; | 
 |  | 
 | 	/* Disable IRQ and clear Interrupt status registers for all SGPIO Pins. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) { | 
 | 		bank =  &aspeed_sgpio_banks[i]; | 
 | 		/* disable irq enable bits */ | 
 | 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_enable)); | 
 | 		/* clear status bits */ | 
 | 		iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status)); | 
 | 	} | 
 |  | 
 | 	irq = &gpio->chip.irq; | 
 | 	gpio_irq_chip_set_chip(irq, &aspeed_sgpio_irq_chip); | 
 | 	irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask; | 
 | 	irq->handler = handle_bad_irq; | 
 | 	irq->default_type = IRQ_TYPE_NONE; | 
 | 	irq->parent_handler = aspeed_sgpio_irq_handler; | 
 | 	irq->parent_handler_data = gpio; | 
 | 	irq->parents = &gpio->irq; | 
 | 	irq->num_parents = 1; | 
 |  | 
 | 	/* Apply default IRQ settings */ | 
 | 	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) { | 
 | 		bank = &aspeed_sgpio_banks[i]; | 
 | 		/* set falling or level-low irq */ | 
 | 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0)); | 
 | 		/* trigger type is edge */ | 
 | 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1)); | 
 | 		/* single edge trigger */ | 
 | 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type2)); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct aspeed_sgpio_pdata ast2400_sgpio_pdata = { | 
 | 	.pin_mask = GENMASK(9, 6), | 
 | }; | 
 |  | 
 | static int aspeed_sgpio_reset_tolerance(struct gpio_chip *chip, | 
 | 					unsigned int offset, bool enable) | 
 | { | 
 | 	struct aspeed_sgpio *gpio = gpiochip_get_data(chip); | 
 | 	void __iomem *reg; | 
 | 	u32 val; | 
 |  | 
 | 	reg = bank_reg(gpio, to_bank(offset), reg_tolerance); | 
 |  | 
 | 	guard(raw_spinlock_irqsave)(&gpio->lock); | 
 |  | 
 | 	val = readl(reg); | 
 |  | 
 | 	if (enable) | 
 | 		val |= GPIO_BIT(offset); | 
 | 	else | 
 | 		val &= ~GPIO_BIT(offset); | 
 |  | 
 | 	writel(val, reg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aspeed_sgpio_set_config(struct gpio_chip *chip, unsigned int offset, | 
 | 				   unsigned long config) | 
 | { | 
 | 	unsigned long param = pinconf_to_config_param(config); | 
 | 	u32 arg = pinconf_to_config_argument(config); | 
 |  | 
 | 	if (param == PIN_CONFIG_PERSIST_STATE) | 
 | 		return aspeed_sgpio_reset_tolerance(chip, offset, arg); | 
 |  | 
 | 	return -ENOTSUPP; | 
 | } | 
 |  | 
 | static const struct aspeed_sgpio_pdata ast2600_sgpiom_pdata = { | 
 | 	.pin_mask = GENMASK(10, 6), | 
 | }; | 
 |  | 
 | static const struct of_device_id aspeed_sgpio_of_table[] = { | 
 | 	{ .compatible = "aspeed,ast2400-sgpio", .data = &ast2400_sgpio_pdata, }, | 
 | 	{ .compatible = "aspeed,ast2500-sgpio", .data = &ast2400_sgpio_pdata, }, | 
 | 	{ .compatible = "aspeed,ast2600-sgpiom", .data = &ast2600_sgpiom_pdata, }, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table); | 
 |  | 
 | static int __init aspeed_sgpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	u32 nr_gpios, sgpio_freq, sgpio_clk_div, gpio_cnt_regval, pin_mask; | 
 | 	const struct aspeed_sgpio_pdata *pdata; | 
 | 	struct aspeed_sgpio *gpio; | 
 | 	unsigned long apb_freq; | 
 | 	int rc; | 
 |  | 
 | 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); | 
 | 	if (!gpio) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	gpio->base = devm_platform_ioremap_resource(pdev, 0); | 
 | 	if (IS_ERR(gpio->base)) | 
 | 		return PTR_ERR(gpio->base); | 
 |  | 
 | 	gpio->dev = &pdev->dev; | 
 |  | 
 | 	pdata = device_get_match_data(&pdev->dev); | 
 | 	if (!pdata) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pin_mask = pdata->pin_mask; | 
 |  | 
 | 	rc = device_property_read_u32(&pdev->dev, "ngpios", &nr_gpios); | 
 | 	if (rc < 0) { | 
 | 		dev_err(&pdev->dev, "Could not read ngpios property\n"); | 
 | 		return -EINVAL; | 
 | 	} else if (nr_gpios % 8) { | 
 | 		dev_err(&pdev->dev, "Number of GPIOs not multiple of 8: %d\n", | 
 | 			nr_gpios); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	rc = device_property_read_u32(&pdev->dev, "bus-frequency", &sgpio_freq); | 
 | 	if (rc < 0) { | 
 | 		dev_err(&pdev->dev, "Could not read bus-frequency property\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	gpio->pclk = devm_clk_get(&pdev->dev, NULL); | 
 | 	if (IS_ERR(gpio->pclk)) { | 
 | 		dev_err(&pdev->dev, "devm_clk_get failed\n"); | 
 | 		return PTR_ERR(gpio->pclk); | 
 | 	} | 
 |  | 
 | 	apb_freq = clk_get_rate(gpio->pclk); | 
 |  | 
 | 	/* | 
 | 	 * From the datasheet, | 
 | 	 *	SGPIO period = 1/PCLK * 2 * (GPIO254[31:16] + 1) | 
 | 	 *	period = 2 * (GPIO254[31:16] + 1) / PCLK | 
 | 	 *	frequency = 1 / (2 * (GPIO254[31:16] + 1) / PCLK) | 
 | 	 *	frequency = PCLK / (2 * (GPIO254[31:16] + 1)) | 
 | 	 *	frequency * 2 * (GPIO254[31:16] + 1) = PCLK | 
 | 	 *	GPIO254[31:16] = PCLK / (frequency * 2) - 1 | 
 | 	 */ | 
 | 	if (sgpio_freq == 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	sgpio_clk_div = (apb_freq / (sgpio_freq * 2)) - 1; | 
 |  | 
 | 	if (sgpio_clk_div > (1 << 16) - 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	gpio_cnt_regval = ((nr_gpios / 8) << ASPEED_SGPIO_PINS_SHIFT) & pin_mask; | 
 | 	iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) | gpio_cnt_regval | | 
 | 		  ASPEED_SGPIO_ENABLE, gpio->base + ASPEED_SGPIO_CTRL); | 
 |  | 
 | 	raw_spin_lock_init(&gpio->lock); | 
 |  | 
 | 	gpio->chip.parent = &pdev->dev; | 
 | 	gpio->chip.ngpio = nr_gpios * 2; | 
 | 	gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask; | 
 | 	gpio->chip.direction_input = aspeed_sgpio_dir_in; | 
 | 	gpio->chip.direction_output = aspeed_sgpio_dir_out; | 
 | 	gpio->chip.get_direction = aspeed_sgpio_get_direction; | 
 | 	gpio->chip.request = NULL; | 
 | 	gpio->chip.free = NULL; | 
 | 	gpio->chip.get = aspeed_sgpio_get; | 
 | 	gpio->chip.set = aspeed_sgpio_set; | 
 | 	gpio->chip.set_config = aspeed_sgpio_set_config; | 
 | 	gpio->chip.label = dev_name(&pdev->dev); | 
 | 	gpio->chip.base = -1; | 
 |  | 
 | 	aspeed_sgpio_setup_irqs(gpio, pdev); | 
 |  | 
 | 	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver aspeed_sgpio_driver = { | 
 | 	.driver = { | 
 | 		.name = KBUILD_MODNAME, | 
 | 		.of_match_table = aspeed_sgpio_of_table, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver_probe(aspeed_sgpio_driver, aspeed_sgpio_probe); | 
 | MODULE_DESCRIPTION("Aspeed Serial GPIO Driver"); |