| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net> | 
 |  * Copyright 2013-2014  Intel Mobile Communications GmbH | 
 |  * Copyright(c) 2015 - 2017 Intel Deutschland GmbH | 
 |  * Copyright (C) 2018-2025 Intel Corporation | 
 |  */ | 
 |  | 
 | #include <linux/jiffies.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <linux/export.h> | 
 | #include <linux/kcov.h> | 
 | #include <linux/bitops.h> | 
 | #include <kunit/visibility.h> | 
 | #include <net/mac80211.h> | 
 | #include <net/ieee80211_radiotap.h> | 
 | #include <linux/unaligned.h> | 
 |  | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "led.h" | 
 | #include "mesh.h" | 
 | #include "wep.h" | 
 | #include "wpa.h" | 
 | #include "tkip.h" | 
 | #include "wme.h" | 
 | #include "rate.h" | 
 |  | 
 | /* | 
 |  * monitor mode reception | 
 |  * | 
 |  * This function cleans up the SKB, i.e. it removes all the stuff | 
 |  * only useful for monitoring. | 
 |  */ | 
 | static struct sk_buff *ieee80211_clean_skb(struct sk_buff *skb, | 
 | 					   unsigned int present_fcs_len, | 
 | 					   unsigned int rtap_space) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	unsigned int hdrlen; | 
 | 	__le16 fc; | 
 |  | 
 | 	if (present_fcs_len) | 
 | 		__pskb_trim(skb, skb->len - present_fcs_len); | 
 | 	pskb_pull(skb, rtap_space); | 
 |  | 
 | 	/* After pulling radiotap header, clear all flags that indicate | 
 | 	 * info in skb->data. | 
 | 	 */ | 
 | 	status->flag &= ~(RX_FLAG_RADIOTAP_TLV_AT_END | | 
 | 			  RX_FLAG_RADIOTAP_LSIG | | 
 | 			  RX_FLAG_RADIOTAP_HE_MU | | 
 | 			  RX_FLAG_RADIOTAP_HE); | 
 |  | 
 | 	hdr = (void *)skb->data; | 
 | 	fc = hdr->frame_control; | 
 |  | 
 | 	/* | 
 | 	 * Remove the HT-Control field (if present) on management | 
 | 	 * frames after we've sent the frame to monitoring. We | 
 | 	 * (currently) don't need it, and don't properly parse | 
 | 	 * frames with it present, due to the assumption of a | 
 | 	 * fixed management header length. | 
 | 	 */ | 
 | 	if (likely(!ieee80211_is_mgmt(fc) || !ieee80211_has_order(fc))) | 
 | 		return skb; | 
 |  | 
 | 	hdrlen = ieee80211_hdrlen(fc); | 
 | 	hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_ORDER); | 
 |  | 
 | 	if (!pskb_may_pull(skb, hdrlen)) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	memmove(skb->data + IEEE80211_HT_CTL_LEN, skb->data, | 
 | 		hdrlen - IEEE80211_HT_CTL_LEN); | 
 | 	pskb_pull(skb, IEEE80211_HT_CTL_LEN); | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | static inline bool should_drop_frame(struct sk_buff *skb, int present_fcs_len, | 
 | 				     unsigned int rtap_space) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr; | 
 |  | 
 | 	hdr = (void *)(skb->data + rtap_space); | 
 |  | 
 | 	if (status->flag & (RX_FLAG_FAILED_FCS_CRC | | 
 | 			    RX_FLAG_FAILED_PLCP_CRC | | 
 | 			    RX_FLAG_ONLY_MONITOR | | 
 | 			    RX_FLAG_NO_PSDU)) | 
 | 		return true; | 
 |  | 
 | 	if (unlikely(skb->len < 16 + present_fcs_len + rtap_space)) | 
 | 		return true; | 
 |  | 
 | 	if (ieee80211_is_ctl(hdr->frame_control) && | 
 | 	    !ieee80211_is_pspoll(hdr->frame_control) && | 
 | 	    !ieee80211_is_back_req(hdr->frame_control)) | 
 | 		return true; | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static int | 
 | ieee80211_rx_radiotap_hdrlen(struct ieee80211_local *local, | 
 | 			     struct ieee80211_rx_status *status, | 
 | 			     struct sk_buff *skb) | 
 | { | 
 | 	int len; | 
 |  | 
 | 	/* always present fields */ | 
 | 	len = sizeof(struct ieee80211_radiotap_header) + 8; | 
 |  | 
 | 	/* allocate extra bitmaps */ | 
 | 	if (status->chains) | 
 | 		len += 4 * hweight8(status->chains); | 
 |  | 
 | 	if (ieee80211_have_rx_timestamp(status)) { | 
 | 		len = ALIGN(len, 8); | 
 | 		len += 8; | 
 | 	} | 
 | 	if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) | 
 | 		len += 1; | 
 |  | 
 | 	/* antenna field, if we don't have per-chain info */ | 
 | 	if (!status->chains) | 
 | 		len += 1; | 
 |  | 
 | 	/* padding for RX_FLAGS if necessary */ | 
 | 	len = ALIGN(len, 2); | 
 |  | 
 | 	if (status->encoding == RX_ENC_HT) /* HT info */ | 
 | 		len += 3; | 
 |  | 
 | 	if (status->flag & RX_FLAG_AMPDU_DETAILS) { | 
 | 		len = ALIGN(len, 4); | 
 | 		len += 8; | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_VHT) { | 
 | 		len = ALIGN(len, 2); | 
 | 		len += 12; | 
 | 	} | 
 |  | 
 | 	if (local->hw.radiotap_timestamp.units_pos >= 0) { | 
 | 		len = ALIGN(len, 8); | 
 | 		len += 12; | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_HE && | 
 | 	    status->flag & RX_FLAG_RADIOTAP_HE) { | 
 | 		len = ALIGN(len, 2); | 
 | 		len += 12; | 
 | 		BUILD_BUG_ON(sizeof(struct ieee80211_radiotap_he) != 12); | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_HE && | 
 | 	    status->flag & RX_FLAG_RADIOTAP_HE_MU) { | 
 | 		len = ALIGN(len, 2); | 
 | 		len += 12; | 
 | 		BUILD_BUG_ON(sizeof(struct ieee80211_radiotap_he_mu) != 12); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_NO_PSDU) | 
 | 		len += 1; | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_LSIG) { | 
 | 		len = ALIGN(len, 2); | 
 | 		len += 4; | 
 | 		BUILD_BUG_ON(sizeof(struct ieee80211_radiotap_lsig) != 4); | 
 | 	} | 
 |  | 
 | 	if (status->chains) { | 
 | 		/* antenna and antenna signal fields */ | 
 | 		len += 2 * hweight8(status->chains); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_TLV_AT_END) { | 
 | 		int tlv_offset = 0; | 
 |  | 
 | 		/* | 
 | 		 * The position to look at depends on the existence (or non- | 
 | 		 * existence) of other elements, so take that into account... | 
 | 		 */ | 
 | 		if (status->flag & RX_FLAG_RADIOTAP_HE) | 
 | 			tlv_offset += | 
 | 				sizeof(struct ieee80211_radiotap_he); | 
 | 		if (status->flag & RX_FLAG_RADIOTAP_HE_MU) | 
 | 			tlv_offset += | 
 | 				sizeof(struct ieee80211_radiotap_he_mu); | 
 | 		if (status->flag & RX_FLAG_RADIOTAP_LSIG) | 
 | 			tlv_offset += | 
 | 				sizeof(struct ieee80211_radiotap_lsig); | 
 |  | 
 | 		/* ensure 4 byte alignment for TLV */ | 
 | 		len = ALIGN(len, 4); | 
 |  | 
 | 		/* TLVs until the mac header */ | 
 | 		len += skb_mac_header(skb) - &skb->data[tlv_offset]; | 
 | 	} | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static void __ieee80211_queue_skb_to_iface(struct ieee80211_sub_if_data *sdata, | 
 | 					   int link_id, | 
 | 					   struct sta_info *sta, | 
 | 					   struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 |  | 
 | 	if (link_id >= 0) { | 
 | 		status->link_valid = 1; | 
 | 		status->link_id = link_id; | 
 | 	} else { | 
 | 		status->link_valid = 0; | 
 | 	} | 
 |  | 
 | 	skb_queue_tail(&sdata->skb_queue, skb); | 
 | 	wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); | 
 | 	if (sta) { | 
 | 		struct link_sta_info *link_sta_info; | 
 |  | 
 | 		if (link_id >= 0) { | 
 | 			link_sta_info = rcu_dereference(sta->link[link_id]); | 
 | 			if (!link_sta_info) | 
 | 				return; | 
 | 		} else { | 
 | 			link_sta_info = &sta->deflink; | 
 | 		} | 
 |  | 
 | 		link_sta_info->rx_stats.packets++; | 
 | 	} | 
 | } | 
 |  | 
 | static void ieee80211_queue_skb_to_iface(struct ieee80211_sub_if_data *sdata, | 
 | 					 int link_id, | 
 | 					 struct sta_info *sta, | 
 | 					 struct sk_buff *skb) | 
 | { | 
 | 	skb->protocol = 0; | 
 | 	__ieee80211_queue_skb_to_iface(sdata, link_id, sta, skb); | 
 | } | 
 |  | 
 | static void ieee80211_handle_mu_mimo_mon(struct ieee80211_sub_if_data *sdata, | 
 | 					 struct sk_buff *skb, | 
 | 					 int rtap_space) | 
 | { | 
 | 	struct { | 
 | 		struct ieee80211_hdr_3addr hdr; | 
 | 		u8 category; | 
 | 		u8 action_code; | 
 | 	} __packed __aligned(2) action; | 
 |  | 
 | 	if (!sdata) | 
 | 		return; | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(action) != IEEE80211_MIN_ACTION_SIZE + 1); | 
 |  | 
 | 	if (skb->len < rtap_space + sizeof(action) + | 
 | 		       VHT_MUMIMO_GROUPS_DATA_LEN) | 
 | 		return; | 
 |  | 
 | 	if (!is_valid_ether_addr(sdata->u.mntr.mu_follow_addr)) | 
 | 		return; | 
 |  | 
 | 	skb_copy_bits(skb, rtap_space, &action, sizeof(action)); | 
 |  | 
 | 	if (!ieee80211_is_action(action.hdr.frame_control)) | 
 | 		return; | 
 |  | 
 | 	if (action.category != WLAN_CATEGORY_VHT) | 
 | 		return; | 
 |  | 
 | 	if (action.action_code != WLAN_VHT_ACTION_GROUPID_MGMT) | 
 | 		return; | 
 |  | 
 | 	if (!ether_addr_equal(action.hdr.addr1, sdata->u.mntr.mu_follow_addr)) | 
 | 		return; | 
 |  | 
 | 	skb = skb_copy(skb, GFP_ATOMIC); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	ieee80211_queue_skb_to_iface(sdata, -1, NULL, skb); | 
 | } | 
 |  | 
 | /* | 
 |  * ieee80211_add_rx_radiotap_header - add radiotap header | 
 |  * | 
 |  * add a radiotap header containing all the fields which the hardware provided. | 
 |  */ | 
 | static void | 
 | ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, | 
 | 				 struct sk_buff *skb, | 
 | 				 struct ieee80211_rate *rate, | 
 | 				 int rtap_len, bool has_fcs) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_radiotap_header *rthdr; | 
 | 	unsigned char *pos; | 
 | 	__le32 *it_present; | 
 | 	u32 it_present_val; | 
 | 	u16 rx_flags = 0; | 
 | 	u16 channel_flags = 0; | 
 | 	u32 tlvs_len = 0; | 
 | 	int mpdulen, chain; | 
 | 	unsigned long chains = status->chains; | 
 | 	struct ieee80211_radiotap_he he = {}; | 
 | 	struct ieee80211_radiotap_he_mu he_mu = {}; | 
 | 	struct ieee80211_radiotap_lsig lsig = {}; | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_HE) { | 
 | 		he = *(struct ieee80211_radiotap_he *)skb->data; | 
 | 		skb_pull(skb, sizeof(he)); | 
 | 		WARN_ON_ONCE(status->encoding != RX_ENC_HE); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_HE_MU) { | 
 | 		he_mu = *(struct ieee80211_radiotap_he_mu *)skb->data; | 
 | 		skb_pull(skb, sizeof(he_mu)); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_LSIG) { | 
 | 		lsig = *(struct ieee80211_radiotap_lsig *)skb->data; | 
 | 		skb_pull(skb, sizeof(lsig)); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_TLV_AT_END) { | 
 | 		/* data is pointer at tlv all other info was pulled off */ | 
 | 		tlvs_len = skb_mac_header(skb) - skb->data; | 
 | 	} | 
 |  | 
 | 	mpdulen = skb->len; | 
 | 	if (!(has_fcs && ieee80211_hw_check(&local->hw, RX_INCLUDES_FCS))) | 
 | 		mpdulen += FCS_LEN; | 
 |  | 
 | 	rthdr = skb_push(skb, rtap_len - tlvs_len); | 
 | 	memset(rthdr, 0, rtap_len - tlvs_len); | 
 | 	it_present = &rthdr->it_present; | 
 |  | 
 | 	/* radiotap header, set always present flags */ | 
 | 	rthdr->it_len = cpu_to_le16(rtap_len); | 
 | 	it_present_val = BIT(IEEE80211_RADIOTAP_FLAGS) | | 
 | 			 BIT(IEEE80211_RADIOTAP_CHANNEL) | | 
 | 			 BIT(IEEE80211_RADIOTAP_RX_FLAGS); | 
 |  | 
 | 	if (!status->chains) | 
 | 		it_present_val |= BIT(IEEE80211_RADIOTAP_ANTENNA); | 
 |  | 
 | 	for_each_set_bit(chain, &chains, IEEE80211_MAX_CHAINS) { | 
 | 		it_present_val |= | 
 | 			BIT(IEEE80211_RADIOTAP_EXT) | | 
 | 			BIT(IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE); | 
 | 		put_unaligned_le32(it_present_val, it_present); | 
 | 		it_present++; | 
 | 		it_present_val = BIT(IEEE80211_RADIOTAP_ANTENNA) | | 
 | 				 BIT(IEEE80211_RADIOTAP_DBM_ANTSIGNAL); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_TLV_AT_END) | 
 | 		it_present_val |= BIT(IEEE80211_RADIOTAP_TLV); | 
 |  | 
 | 	put_unaligned_le32(it_present_val, it_present); | 
 |  | 
 | 	/* This references through an offset into it_optional[] rather | 
 | 	 * than via it_present otherwise later uses of pos will cause | 
 | 	 * the compiler to think we have walked past the end of the | 
 | 	 * struct member. | 
 | 	 */ | 
 | 	pos = (void *)&rthdr->it_optional[it_present + 1 - rthdr->it_optional]; | 
 |  | 
 | 	/* the order of the following fields is important */ | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_TSFT */ | 
 | 	if (ieee80211_have_rx_timestamp(status)) { | 
 | 		/* padding */ | 
 | 		while ((pos - (u8 *)rthdr) & 7) | 
 | 			*pos++ = 0; | 
 | 		put_unaligned_le64( | 
 | 			ieee80211_calculate_rx_timestamp(local, status, | 
 | 							 mpdulen, 0), | 
 | 			pos); | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_TSFT)); | 
 | 		pos += 8; | 
 | 	} | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_FLAGS */ | 
 | 	if (has_fcs && ieee80211_hw_check(&local->hw, RX_INCLUDES_FCS)) | 
 | 		*pos |= IEEE80211_RADIOTAP_F_FCS; | 
 | 	if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) | 
 | 		*pos |= IEEE80211_RADIOTAP_F_BADFCS; | 
 | 	if (status->enc_flags & RX_ENC_FLAG_SHORTPRE) | 
 | 		*pos |= IEEE80211_RADIOTAP_F_SHORTPRE; | 
 | 	pos++; | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_RATE */ | 
 | 	if (!rate || status->encoding != RX_ENC_LEGACY) { | 
 | 		/* | 
 | 		 * Without rate information don't add it. If we have, | 
 | 		 * MCS information is a separate field in radiotap, | 
 | 		 * added below. The byte here is needed as padding | 
 | 		 * for the channel though, so initialise it to 0. | 
 | 		 */ | 
 | 		*pos = 0; | 
 | 	} else { | 
 | 		int shift = 0; | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_RATE)); | 
 | 		if (status->bw == RATE_INFO_BW_10) | 
 | 			shift = 1; | 
 | 		else if (status->bw == RATE_INFO_BW_5) | 
 | 			shift = 2; | 
 | 		*pos = DIV_ROUND_UP(rate->bitrate, 5 * (1 << shift)); | 
 | 	} | 
 | 	pos++; | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_CHANNEL */ | 
 | 	/* TODO: frequency offset in KHz */ | 
 | 	put_unaligned_le16(status->freq, pos); | 
 | 	pos += 2; | 
 | 	if (status->bw == RATE_INFO_BW_10) | 
 | 		channel_flags |= IEEE80211_CHAN_HALF; | 
 | 	else if (status->bw == RATE_INFO_BW_5) | 
 | 		channel_flags |= IEEE80211_CHAN_QUARTER; | 
 |  | 
 | 	if (status->band == NL80211_BAND_5GHZ || | 
 | 	    status->band == NL80211_BAND_6GHZ) | 
 | 		channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ; | 
 | 	else if (status->encoding != RX_ENC_LEGACY) | 
 | 		channel_flags |= IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; | 
 | 	else if (rate && rate->flags & IEEE80211_RATE_ERP_G) | 
 | 		channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ; | 
 | 	else if (rate) | 
 | 		channel_flags |= IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ; | 
 | 	else | 
 | 		channel_flags |= IEEE80211_CHAN_2GHZ; | 
 | 	put_unaligned_le16(channel_flags, pos); | 
 | 	pos += 2; | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */ | 
 | 	if (ieee80211_hw_check(&local->hw, SIGNAL_DBM) && | 
 | 	    !(status->flag & RX_FLAG_NO_SIGNAL_VAL)) { | 
 | 		*pos = status->signal; | 
 | 		rthdr->it_present |= | 
 | 			cpu_to_le32(BIT(IEEE80211_RADIOTAP_DBM_ANTSIGNAL)); | 
 | 		pos++; | 
 | 	} | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_LOCK_QUALITY is missing */ | 
 |  | 
 | 	if (!status->chains) { | 
 | 		/* IEEE80211_RADIOTAP_ANTENNA */ | 
 | 		*pos = status->antenna; | 
 | 		pos++; | 
 | 	} | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */ | 
 |  | 
 | 	/* IEEE80211_RADIOTAP_RX_FLAGS */ | 
 | 	/* ensure 2 byte alignment for the 2 byte field as required */ | 
 | 	if ((pos - (u8 *)rthdr) & 1) | 
 | 		*pos++ = 0; | 
 | 	if (status->flag & RX_FLAG_FAILED_PLCP_CRC) | 
 | 		rx_flags |= IEEE80211_RADIOTAP_F_RX_BADPLCP; | 
 | 	put_unaligned_le16(rx_flags, pos); | 
 | 	pos += 2; | 
 |  | 
 | 	if (status->encoding == RX_ENC_HT) { | 
 | 		unsigned int stbc; | 
 |  | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS)); | 
 | 		*pos = local->hw.radiotap_mcs_details; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_HT_GF) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_LDPC) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_HAVE_FEC; | 
 | 		pos++; | 
 | 		*pos = 0; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_SHORT_GI) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_SGI; | 
 | 		if (status->bw == RATE_INFO_BW_40) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_BW_40; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_HT_GF) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_FMT_GF; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_LDPC) | 
 | 			*pos |= IEEE80211_RADIOTAP_MCS_FEC_LDPC; | 
 | 		stbc = (status->enc_flags & RX_ENC_FLAG_STBC_MASK) >> RX_ENC_FLAG_STBC_SHIFT; | 
 | 		*pos |= stbc << IEEE80211_RADIOTAP_MCS_STBC_SHIFT; | 
 | 		pos++; | 
 | 		*pos++ = status->rate_idx; | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_AMPDU_DETAILS) { | 
 | 		u16 flags = 0; | 
 |  | 
 | 		/* ensure 4 byte alignment */ | 
 | 		while ((pos - (u8 *)rthdr) & 3) | 
 | 			pos++; | 
 | 		rthdr->it_present |= | 
 | 			cpu_to_le32(BIT(IEEE80211_RADIOTAP_AMPDU_STATUS)); | 
 | 		put_unaligned_le32(status->ampdu_reference, pos); | 
 | 		pos += 4; | 
 | 		if (status->flag & RX_FLAG_AMPDU_LAST_KNOWN) | 
 | 			flags |= IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN; | 
 | 		if (status->flag & RX_FLAG_AMPDU_IS_LAST) | 
 | 			flags |= IEEE80211_RADIOTAP_AMPDU_IS_LAST; | 
 | 		if (status->flag & RX_FLAG_AMPDU_DELIM_CRC_ERROR) | 
 | 			flags |= IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR; | 
 | 		if (status->flag & RX_FLAG_AMPDU_EOF_BIT_KNOWN) | 
 | 			flags |= IEEE80211_RADIOTAP_AMPDU_EOF_KNOWN; | 
 | 		if (status->flag & RX_FLAG_AMPDU_EOF_BIT) | 
 | 			flags |= IEEE80211_RADIOTAP_AMPDU_EOF; | 
 | 		put_unaligned_le16(flags, pos); | 
 | 		pos += 2; | 
 | 		*pos++ = 0; | 
 | 		*pos++ = 0; | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_VHT) { | 
 | 		u16 known = local->hw.radiotap_vht_details; | 
 |  | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_VHT)); | 
 | 		put_unaligned_le16(known, pos); | 
 | 		pos += 2; | 
 | 		/* flags */ | 
 | 		if (status->enc_flags & RX_ENC_FLAG_SHORT_GI) | 
 | 			*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI; | 
 | 		/* in VHT, STBC is binary */ | 
 | 		if (status->enc_flags & RX_ENC_FLAG_STBC_MASK) | 
 | 			*pos |= IEEE80211_RADIOTAP_VHT_FLAG_STBC; | 
 | 		if (status->enc_flags & RX_ENC_FLAG_BF) | 
 | 			*pos |= IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED; | 
 | 		pos++; | 
 | 		/* bandwidth */ | 
 | 		switch (status->bw) { | 
 | 		case RATE_INFO_BW_80: | 
 | 			*pos++ = 4; | 
 | 			break; | 
 | 		case RATE_INFO_BW_160: | 
 | 			*pos++ = 11; | 
 | 			break; | 
 | 		case RATE_INFO_BW_40: | 
 | 			*pos++ = 1; | 
 | 			break; | 
 | 		default: | 
 | 			*pos++ = 0; | 
 | 		} | 
 | 		/* MCS/NSS */ | 
 | 		*pos = (status->rate_idx << 4) | status->nss; | 
 | 		pos += 4; | 
 | 		/* coding field */ | 
 | 		if (status->enc_flags & RX_ENC_FLAG_LDPC) | 
 | 			*pos |= IEEE80211_RADIOTAP_CODING_LDPC_USER0; | 
 | 		pos++; | 
 | 		/* group ID */ | 
 | 		pos++; | 
 | 		/* partial_aid */ | 
 | 		pos += 2; | 
 | 	} | 
 |  | 
 | 	if (local->hw.radiotap_timestamp.units_pos >= 0) { | 
 | 		u16 accuracy = 0; | 
 | 		u8 flags; | 
 | 		u64 ts; | 
 |  | 
 | 		rthdr->it_present |= | 
 | 			cpu_to_le32(BIT(IEEE80211_RADIOTAP_TIMESTAMP)); | 
 |  | 
 | 		/* ensure 8 byte alignment */ | 
 | 		while ((pos - (u8 *)rthdr) & 7) | 
 | 			pos++; | 
 |  | 
 | 		if (status->flag & RX_FLAG_MACTIME_IS_RTAP_TS64) { | 
 | 			flags = IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT; | 
 | 			ts = status->mactime; | 
 | 		} else { | 
 | 			flags = IEEE80211_RADIOTAP_TIMESTAMP_FLAG_32BIT; | 
 | 			ts = status->device_timestamp; | 
 | 		} | 
 |  | 
 | 		put_unaligned_le64(ts, pos); | 
 | 		pos += sizeof(u64); | 
 |  | 
 | 		if (local->hw.radiotap_timestamp.accuracy >= 0) { | 
 | 			accuracy = local->hw.radiotap_timestamp.accuracy; | 
 | 			flags |= IEEE80211_RADIOTAP_TIMESTAMP_FLAG_ACCURACY; | 
 | 		} | 
 | 		put_unaligned_le16(accuracy, pos); | 
 | 		pos += sizeof(u16); | 
 |  | 
 | 		*pos++ = local->hw.radiotap_timestamp.units_pos; | 
 | 		*pos++ = flags; | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_HE && | 
 | 	    status->flag & RX_FLAG_RADIOTAP_HE) { | 
 | #define HE_PREP(f, val)	le16_encode_bits(val, IEEE80211_RADIOTAP_HE_##f) | 
 |  | 
 | 		if (status->enc_flags & RX_ENC_FLAG_STBC_MASK) { | 
 | 			he.data6 |= HE_PREP(DATA6_NSTS, | 
 | 					    FIELD_GET(RX_ENC_FLAG_STBC_MASK, | 
 | 						      status->enc_flags)); | 
 | 			he.data3 |= HE_PREP(DATA3_STBC, 1); | 
 | 		} else { | 
 | 			he.data6 |= HE_PREP(DATA6_NSTS, status->nss); | 
 | 		} | 
 |  | 
 | #define CHECK_GI(s) \ | 
 | 	BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_GI_##s != \ | 
 | 		     (int)NL80211_RATE_INFO_HE_GI_##s) | 
 |  | 
 | 		CHECK_GI(0_8); | 
 | 		CHECK_GI(1_6); | 
 | 		CHECK_GI(3_2); | 
 |  | 
 | 		he.data3 |= HE_PREP(DATA3_DATA_MCS, status->rate_idx); | 
 | 		he.data3 |= HE_PREP(DATA3_DATA_DCM, status->he_dcm); | 
 | 		he.data3 |= HE_PREP(DATA3_CODING, | 
 | 				    !!(status->enc_flags & RX_ENC_FLAG_LDPC)); | 
 |  | 
 | 		he.data5 |= HE_PREP(DATA5_GI, status->he_gi); | 
 |  | 
 | 		switch (status->bw) { | 
 | 		case RATE_INFO_BW_20: | 
 | 			he.data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | 
 | 					    IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_20MHZ); | 
 | 			break; | 
 | 		case RATE_INFO_BW_40: | 
 | 			he.data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | 
 | 					    IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_40MHZ); | 
 | 			break; | 
 | 		case RATE_INFO_BW_80: | 
 | 			he.data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | 
 | 					    IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_80MHZ); | 
 | 			break; | 
 | 		case RATE_INFO_BW_160: | 
 | 			he.data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | 
 | 					    IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_160MHZ); | 
 | 			break; | 
 | 		case RATE_INFO_BW_HE_RU: | 
 | #define CHECK_RU_ALLOC(s) \ | 
 | 	BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_##s##T != \ | 
 | 		     NL80211_RATE_INFO_HE_RU_ALLOC_##s + 4) | 
 |  | 
 | 			CHECK_RU_ALLOC(26); | 
 | 			CHECK_RU_ALLOC(52); | 
 | 			CHECK_RU_ALLOC(106); | 
 | 			CHECK_RU_ALLOC(242); | 
 | 			CHECK_RU_ALLOC(484); | 
 | 			CHECK_RU_ALLOC(996); | 
 | 			CHECK_RU_ALLOC(2x996); | 
 |  | 
 | 			he.data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | 
 | 					    status->he_ru + 4); | 
 | 			break; | 
 | 		default: | 
 | 			WARN_ONCE(1, "Invalid SU BW %d\n", status->bw); | 
 | 		} | 
 |  | 
 | 		/* ensure 2 byte alignment */ | 
 | 		while ((pos - (u8 *)rthdr) & 1) | 
 | 			pos++; | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_HE)); | 
 | 		memcpy(pos, &he, sizeof(he)); | 
 | 		pos += sizeof(he); | 
 | 	} | 
 |  | 
 | 	if (status->encoding == RX_ENC_HE && | 
 | 	    status->flag & RX_FLAG_RADIOTAP_HE_MU) { | 
 | 		/* ensure 2 byte alignment */ | 
 | 		while ((pos - (u8 *)rthdr) & 1) | 
 | 			pos++; | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_HE_MU)); | 
 | 		memcpy(pos, &he_mu, sizeof(he_mu)); | 
 | 		pos += sizeof(he_mu); | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_NO_PSDU) { | 
 | 		rthdr->it_present |= | 
 | 			cpu_to_le32(BIT(IEEE80211_RADIOTAP_ZERO_LEN_PSDU)); | 
 | 		*pos++ = status->zero_length_psdu_type; | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_LSIG) { | 
 | 		/* ensure 2 byte alignment */ | 
 | 		while ((pos - (u8 *)rthdr) & 1) | 
 | 			pos++; | 
 | 		rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_LSIG)); | 
 | 		memcpy(pos, &lsig, sizeof(lsig)); | 
 | 		pos += sizeof(lsig); | 
 | 	} | 
 |  | 
 | 	for_each_set_bit(chain, &chains, IEEE80211_MAX_CHAINS) { | 
 | 		*pos++ = status->chain_signal[chain]; | 
 | 		*pos++ = chain; | 
 | 	} | 
 | } | 
 |  | 
 | static struct sk_buff * | 
 | ieee80211_make_monitor_skb(struct ieee80211_local *local, | 
 | 			   struct sk_buff **origskb, | 
 | 			   struct ieee80211_rate *rate, | 
 | 			   int rtap_space, bool use_origskb) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(*origskb); | 
 | 	int rt_hdrlen, needed_headroom; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* room for the radiotap header based on driver features */ | 
 | 	rt_hdrlen = ieee80211_rx_radiotap_hdrlen(local, status, *origskb); | 
 | 	needed_headroom = rt_hdrlen - rtap_space; | 
 |  | 
 | 	if (use_origskb) { | 
 | 		/* only need to expand headroom if necessary */ | 
 | 		skb = *origskb; | 
 | 		*origskb = NULL; | 
 |  | 
 | 		/* | 
 | 		 * This shouldn't trigger often because most devices have an | 
 | 		 * RX header they pull before we get here, and that should | 
 | 		 * be big enough for our radiotap information. We should | 
 | 		 * probably export the length to drivers so that we can have | 
 | 		 * them allocate enough headroom to start with. | 
 | 		 */ | 
 | 		if (skb_headroom(skb) < needed_headroom && | 
 | 		    pskb_expand_head(skb, needed_headroom, 0, GFP_ATOMIC)) { | 
 | 			dev_kfree_skb(skb); | 
 | 			return NULL; | 
 | 		} | 
 | 	} else { | 
 | 		/* | 
 | 		 * Need to make a copy and possibly remove radiotap header | 
 | 		 * and FCS from the original. | 
 | 		 */ | 
 | 		skb = skb_copy_expand(*origskb, needed_headroom + NET_SKB_PAD, | 
 | 				      0, GFP_ATOMIC); | 
 |  | 
 | 		if (!skb) | 
 | 			return NULL; | 
 | 	} | 
 |  | 
 | 	/* prepend radiotap information */ | 
 | 	ieee80211_add_rx_radiotap_header(local, skb, rate, rt_hdrlen, true); | 
 |  | 
 | 	skb_reset_mac_header(skb); | 
 | 	skb->ip_summed = CHECKSUM_UNNECESSARY; | 
 | 	skb->pkt_type = PACKET_OTHERHOST; | 
 | 	skb->protocol = htons(ETH_P_802_2); | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | /* | 
 |  * This function copies a received frame to all monitor interfaces and | 
 |  * returns a cleaned-up SKB that no longer includes the FCS nor the | 
 |  * radiotap header the driver might have added. | 
 |  */ | 
 | static struct sk_buff * | 
 | ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, | 
 | 		     struct ieee80211_rate *rate) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(origskb); | 
 | 	struct ieee80211_sub_if_data *sdata, *prev_sdata = NULL; | 
 | 	struct sk_buff *skb, *monskb = NULL; | 
 | 	int present_fcs_len = 0; | 
 | 	unsigned int rtap_space = 0; | 
 | 	struct ieee80211_sub_if_data *monitor_sdata = | 
 | 		rcu_dereference(local->monitor_sdata); | 
 | 	bool only_monitor = false; | 
 | 	unsigned int min_head_len; | 
 |  | 
 | 	if (WARN_ON_ONCE(status->flag & RX_FLAG_RADIOTAP_TLV_AT_END && | 
 | 			 !skb_mac_header_was_set(origskb))) { | 
 | 		/* with this skb no way to know where frame payload starts */ | 
 | 		dev_kfree_skb(origskb); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_HE) | 
 | 		rtap_space += sizeof(struct ieee80211_radiotap_he); | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_HE_MU) | 
 | 		rtap_space += sizeof(struct ieee80211_radiotap_he_mu); | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_LSIG) | 
 | 		rtap_space += sizeof(struct ieee80211_radiotap_lsig); | 
 |  | 
 | 	if (status->flag & RX_FLAG_RADIOTAP_TLV_AT_END) | 
 | 		rtap_space += skb_mac_header(origskb) - &origskb->data[rtap_space]; | 
 |  | 
 | 	min_head_len = rtap_space; | 
 |  | 
 | 	/* | 
 | 	 * First, we may need to make a copy of the skb because | 
 | 	 *  (1) we need to modify it for radiotap (if not present), and | 
 | 	 *  (2) the other RX handlers will modify the skb we got. | 
 | 	 * | 
 | 	 * We don't need to, of course, if we aren't going to return | 
 | 	 * the SKB because it has a bad FCS/PLCP checksum. | 
 | 	 */ | 
 |  | 
 | 	if (!(status->flag & RX_FLAG_NO_PSDU)) { | 
 | 		if (ieee80211_hw_check(&local->hw, RX_INCLUDES_FCS)) { | 
 | 			if (unlikely(origskb->len <= FCS_LEN + rtap_space)) { | 
 | 				/* driver bug */ | 
 | 				WARN_ON(1); | 
 | 				dev_kfree_skb(origskb); | 
 | 				return NULL; | 
 | 			} | 
 | 			present_fcs_len = FCS_LEN; | 
 | 		} | 
 |  | 
 | 		/* also consider the hdr->frame_control */ | 
 | 		min_head_len += 2; | 
 | 	} | 
 |  | 
 | 	/* ensure that the expected data elements are in skb head */ | 
 | 	if (!pskb_may_pull(origskb, min_head_len)) { | 
 | 		dev_kfree_skb(origskb); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	only_monitor = should_drop_frame(origskb, present_fcs_len, rtap_space); | 
 |  | 
 | 	if (!local->monitors || (status->flag & RX_FLAG_SKIP_MONITOR)) { | 
 | 		if (only_monitor) { | 
 | 			dev_kfree_skb(origskb); | 
 | 			return NULL; | 
 | 		} | 
 |  | 
 | 		return ieee80211_clean_skb(origskb, present_fcs_len, | 
 | 					   rtap_space); | 
 | 	} | 
 |  | 
 | 	ieee80211_handle_mu_mimo_mon(monitor_sdata, origskb, rtap_space); | 
 |  | 
 | 	list_for_each_entry_rcu(sdata, &local->mon_list, u.mntr.list) { | 
 | 		struct cfg80211_chan_def *chandef; | 
 |  | 
 | 		chandef = &sdata->vif.bss_conf.chanreq.oper; | 
 | 		if (chandef->chan && | 
 | 		    chandef->chan->center_freq != status->freq) | 
 | 			continue; | 
 |  | 
 | 		if (!prev_sdata) { | 
 | 			prev_sdata = sdata; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) | 
 | 			ieee80211_handle_mu_mimo_mon(sdata, origskb, rtap_space); | 
 |  | 
 | 		if (!monskb) | 
 | 			monskb = ieee80211_make_monitor_skb(local, &origskb, | 
 | 							    rate, rtap_space, | 
 | 							    false); | 
 | 		if (!monskb) | 
 | 			continue; | 
 |  | 
 | 		skb = skb_clone(monskb, GFP_ATOMIC); | 
 | 		if (!skb) | 
 | 			continue; | 
 |  | 
 | 		skb->dev = prev_sdata->dev; | 
 | 		dev_sw_netstats_rx_add(skb->dev, skb->len); | 
 | 		netif_receive_skb(skb); | 
 | 		prev_sdata = sdata; | 
 | 	} | 
 |  | 
 | 	if (prev_sdata) { | 
 | 		if (monskb) | 
 | 			skb = monskb; | 
 | 		else | 
 | 			skb = ieee80211_make_monitor_skb(local, &origskb, | 
 | 							 rate, rtap_space, | 
 | 							 only_monitor); | 
 | 		if (skb) { | 
 | 			skb->dev = prev_sdata->dev; | 
 | 			dev_sw_netstats_rx_add(skb->dev, skb->len); | 
 | 			netif_receive_skb(skb); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!origskb) | 
 | 		return NULL; | 
 |  | 
 | 	return ieee80211_clean_skb(origskb, present_fcs_len, rtap_space); | 
 | } | 
 |  | 
 | static void ieee80211_parse_qos(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 | 	int tid, seqno_idx, security_idx; | 
 |  | 
 | 	/* does the frame have a qos control field? */ | 
 | 	if (ieee80211_is_data_qos(hdr->frame_control)) { | 
 | 		u8 *qc = ieee80211_get_qos_ctl(hdr); | 
 | 		/* frame has qos control */ | 
 | 		tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | 
 | 		if (*qc & IEEE80211_QOS_CTL_A_MSDU_PRESENT) | 
 | 			status->rx_flags |= IEEE80211_RX_AMSDU; | 
 |  | 
 | 		seqno_idx = tid; | 
 | 		security_idx = tid; | 
 | 	} else { | 
 | 		/* | 
 | 		 * IEEE 802.11-2007, 7.1.3.4.1 ("Sequence Number field"): | 
 | 		 * | 
 | 		 *	Sequence numbers for management frames, QoS data | 
 | 		 *	frames with a broadcast/multicast address in the | 
 | 		 *	Address 1 field, and all non-QoS data frames sent | 
 | 		 *	by QoS STAs are assigned using an additional single | 
 | 		 *	modulo-4096 counter, [...] | 
 | 		 * | 
 | 		 * We also use that counter for non-QoS STAs. | 
 | 		 */ | 
 | 		seqno_idx = IEEE80211_NUM_TIDS; | 
 | 		security_idx = 0; | 
 | 		if (ieee80211_is_mgmt(hdr->frame_control)) | 
 | 			security_idx = IEEE80211_NUM_TIDS; | 
 | 		tid = 0; | 
 | 	} | 
 |  | 
 | 	rx->seqno_idx = seqno_idx; | 
 | 	rx->security_idx = security_idx; | 
 | 	/* Set skb->priority to 1d tag if highest order bit of TID is not set. | 
 | 	 * For now, set skb->priority to 0 for other cases. */ | 
 | 	rx->skb->priority = (tid > 7) ? 0 : tid; | 
 | } | 
 |  | 
 | /** | 
 |  * DOC: Packet alignment | 
 |  * | 
 |  * Drivers always need to pass packets that are aligned to two-byte boundaries | 
 |  * to the stack. | 
 |  * | 
 |  * Additionally, they should, if possible, align the payload data in a way that | 
 |  * guarantees that the contained IP header is aligned to a four-byte | 
 |  * boundary. In the case of regular frames, this simply means aligning the | 
 |  * payload to a four-byte boundary (because either the IP header is directly | 
 |  * contained, or IV/RFC1042 headers that have a length divisible by four are | 
 |  * in front of it).  If the payload data is not properly aligned and the | 
 |  * architecture doesn't support efficient unaligned operations, mac80211 | 
 |  * will align the data. | 
 |  * | 
 |  * With A-MSDU frames, however, the payload data address must yield two modulo | 
 |  * four because there are 14-byte 802.3 headers within the A-MSDU frames that | 
 |  * push the IP header further back to a multiple of four again. Thankfully, the | 
 |  * specs were sane enough this time around to require padding each A-MSDU | 
 |  * subframe to a length that is a multiple of four. | 
 |  * | 
 |  * Padding like Atheros hardware adds which is between the 802.11 header and | 
 |  * the payload is not supported; the driver is required to move the 802.11 | 
 |  * header to be directly in front of the payload in that case. | 
 |  */ | 
 | static void ieee80211_verify_alignment(struct ieee80211_rx_data *rx) | 
 | { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 	WARN_ON_ONCE((unsigned long)rx->skb->data & 1); | 
 | #endif | 
 | } | 
 |  | 
 |  | 
 | /* rx handlers */ | 
 |  | 
 | static int ieee80211_is_unicast_robust_mgmt_frame(struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1)) | 
 | 		return 0; | 
 |  | 
 | 	return ieee80211_is_robust_mgmt_frame(skb); | 
 | } | 
 |  | 
 |  | 
 | static int ieee80211_is_multicast_robust_mgmt_frame(struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 |  | 
 | 	if (!is_multicast_ether_addr(hdr->addr1)) | 
 | 		return 0; | 
 |  | 
 | 	return ieee80211_is_robust_mgmt_frame(skb); | 
 | } | 
 |  | 
 |  | 
 | /* Get the BIP key index from MMIE; return -1 if this is not a BIP frame */ | 
 | static int ieee80211_get_mmie_keyidx(struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data; | 
 | 	struct ieee80211_mmie *mmie; | 
 | 	struct ieee80211_mmie_16 *mmie16; | 
 |  | 
 | 	if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da)) | 
 | 		return -1; | 
 |  | 
 | 	if (!ieee80211_is_robust_mgmt_frame(skb) && | 
 | 	    !ieee80211_is_beacon(hdr->frame_control)) | 
 | 		return -1; /* not a robust management frame */ | 
 |  | 
 | 	mmie = (struct ieee80211_mmie *) | 
 | 		(skb->data + skb->len - sizeof(*mmie)); | 
 | 	if (mmie->element_id == WLAN_EID_MMIE && | 
 | 	    mmie->length == sizeof(*mmie) - 2) | 
 | 		return le16_to_cpu(mmie->key_id); | 
 |  | 
 | 	mmie16 = (struct ieee80211_mmie_16 *) | 
 | 		(skb->data + skb->len - sizeof(*mmie16)); | 
 | 	if (skb->len >= 24 + sizeof(*mmie16) && | 
 | 	    mmie16->element_id == WLAN_EID_MMIE && | 
 | 	    mmie16->length == sizeof(*mmie16) - 2) | 
 | 		return le16_to_cpu(mmie16->key_id); | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | static int ieee80211_get_keyid(struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	__le16 fc = hdr->frame_control; | 
 | 	int hdrlen = ieee80211_hdrlen(fc); | 
 | 	u8 keyid; | 
 |  | 
 | 	/* WEP, TKIP, CCMP and GCMP */ | 
 | 	if (unlikely(skb->len < hdrlen + IEEE80211_WEP_IV_LEN)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	skb_copy_bits(skb, hdrlen + 3, &keyid, 1); | 
 |  | 
 | 	keyid >>= 6; | 
 |  | 
 | 	return keyid; | 
 | } | 
 |  | 
 | static ieee80211_rx_result ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	char *dev_addr = rx->sdata->vif.addr; | 
 |  | 
 | 	if (ieee80211_is_data(hdr->frame_control)) { | 
 | 		if (is_multicast_ether_addr(hdr->addr1)) { | 
 | 			if (ieee80211_has_tods(hdr->frame_control) || | 
 | 			    !ieee80211_has_fromds(hdr->frame_control)) | 
 | 				return RX_DROP; | 
 | 			if (ether_addr_equal(hdr->addr3, dev_addr)) | 
 | 				return RX_DROP; | 
 | 		} else { | 
 | 			if (!ieee80211_has_a4(hdr->frame_control)) | 
 | 				return RX_DROP; | 
 | 			if (ether_addr_equal(hdr->addr4, dev_addr)) | 
 | 				return RX_DROP; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* If there is not an established peer link and this is not a peer link | 
 | 	 * establisment frame, beacon or probe, drop the frame. | 
 | 	 */ | 
 |  | 
 | 	if (!rx->sta || sta_plink_state(rx->sta) != NL80211_PLINK_ESTAB) { | 
 | 		struct ieee80211_mgmt *mgmt; | 
 |  | 
 | 		if (!ieee80211_is_mgmt(hdr->frame_control)) | 
 | 			return RX_DROP; | 
 |  | 
 | 		if (ieee80211_is_action(hdr->frame_control)) { | 
 | 			u8 category; | 
 |  | 
 | 			/* make sure category field is present */ | 
 | 			if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE) | 
 | 				return RX_DROP; | 
 |  | 
 | 			mgmt = (struct ieee80211_mgmt *)hdr; | 
 | 			category = mgmt->u.action.category; | 
 | 			if (category != WLAN_CATEGORY_MESH_ACTION && | 
 | 			    category != WLAN_CATEGORY_SELF_PROTECTED) | 
 | 				return RX_DROP; | 
 | 			return RX_CONTINUE; | 
 | 		} | 
 |  | 
 | 		if (ieee80211_is_probe_req(hdr->frame_control) || | 
 | 		    ieee80211_is_probe_resp(hdr->frame_control) || | 
 | 		    ieee80211_is_beacon(hdr->frame_control) || | 
 | 		    ieee80211_is_auth(hdr->frame_control)) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static inline bool ieee80211_rx_reorder_ready(struct tid_ampdu_rx *tid_agg_rx, | 
 | 					      int index) | 
 | { | 
 | 	struct sk_buff_head *frames = &tid_agg_rx->reorder_buf[index]; | 
 | 	struct sk_buff *tail = skb_peek_tail(frames); | 
 | 	struct ieee80211_rx_status *status; | 
 |  | 
 | 	if (tid_agg_rx->reorder_buf_filtered && | 
 | 	    tid_agg_rx->reorder_buf_filtered & BIT_ULL(index)) | 
 | 		return true; | 
 |  | 
 | 	if (!tail) | 
 | 		return false; | 
 |  | 
 | 	status = IEEE80211_SKB_RXCB(tail); | 
 | 	if (status->flag & RX_FLAG_AMSDU_MORE) | 
 | 		return false; | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, | 
 | 					    struct tid_ampdu_rx *tid_agg_rx, | 
 | 					    int index, | 
 | 					    struct sk_buff_head *frames) | 
 | { | 
 | 	struct sk_buff_head *skb_list = &tid_agg_rx->reorder_buf[index]; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_rx_status *status; | 
 |  | 
 | 	lockdep_assert_held(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	if (skb_queue_empty(skb_list)) | 
 | 		goto no_frame; | 
 |  | 
 | 	if (!ieee80211_rx_reorder_ready(tid_agg_rx, index)) { | 
 | 		__skb_queue_purge(skb_list); | 
 | 		goto no_frame; | 
 | 	} | 
 |  | 
 | 	/* release frames from the reorder ring buffer */ | 
 | 	tid_agg_rx->stored_mpdu_num--; | 
 | 	while ((skb = __skb_dequeue(skb_list))) { | 
 | 		status = IEEE80211_SKB_RXCB(skb); | 
 | 		status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE; | 
 | 		__skb_queue_tail(frames, skb); | 
 | 	} | 
 |  | 
 | no_frame: | 
 | 	if (tid_agg_rx->reorder_buf_filtered) | 
 | 		tid_agg_rx->reorder_buf_filtered &= ~BIT_ULL(index); | 
 | 	tid_agg_rx->head_seq_num = ieee80211_sn_inc(tid_agg_rx->head_seq_num); | 
 | } | 
 |  | 
 | static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata, | 
 | 					     struct tid_ampdu_rx *tid_agg_rx, | 
 | 					     u16 head_seq_num, | 
 | 					     struct sk_buff_head *frames) | 
 | { | 
 | 	int index; | 
 |  | 
 | 	lockdep_assert_held(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	while (ieee80211_sn_less(tid_agg_rx->head_seq_num, head_seq_num)) { | 
 | 		index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size; | 
 | 		ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, | 
 | 						frames); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If | 
 |  * the skb was added to the buffer longer than this time ago, the earlier | 
 |  * frames that have not yet been received are assumed to be lost and the skb | 
 |  * can be released for processing. This may also release other skb's from the | 
 |  * reorder buffer if there are no additional gaps between the frames. | 
 |  * | 
 |  * Callers must hold tid_agg_rx->reorder_lock. | 
 |  */ | 
 | #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) | 
 |  | 
 | static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, | 
 | 					  struct tid_ampdu_rx *tid_agg_rx, | 
 | 					  struct sk_buff_head *frames) | 
 | { | 
 | 	int index, i, j; | 
 |  | 
 | 	lockdep_assert_held(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	/* release the buffer until next missing frame */ | 
 | 	index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size; | 
 | 	if (!ieee80211_rx_reorder_ready(tid_agg_rx, index) && | 
 | 	    tid_agg_rx->stored_mpdu_num) { | 
 | 		/* | 
 | 		 * No buffers ready to be released, but check whether any | 
 | 		 * frames in the reorder buffer have timed out. | 
 | 		 */ | 
 | 		int skipped = 1; | 
 | 		for (j = (index + 1) % tid_agg_rx->buf_size; j != index; | 
 | 		     j = (j + 1) % tid_agg_rx->buf_size) { | 
 | 			if (!ieee80211_rx_reorder_ready(tid_agg_rx, j)) { | 
 | 				skipped++; | 
 | 				continue; | 
 | 			} | 
 | 			if (skipped && | 
 | 			    !time_after(jiffies, tid_agg_rx->reorder_time[j] + | 
 | 					HT_RX_REORDER_BUF_TIMEOUT)) | 
 | 				goto set_release_timer; | 
 |  | 
 | 			/* don't leave incomplete A-MSDUs around */ | 
 | 			for (i = (index + 1) % tid_agg_rx->buf_size; i != j; | 
 | 			     i = (i + 1) % tid_agg_rx->buf_size) | 
 | 				__skb_queue_purge(&tid_agg_rx->reorder_buf[i]); | 
 |  | 
 | 			ht_dbg_ratelimited(sdata, | 
 | 					   "release an RX reorder frame due to timeout on earlier frames\n"); | 
 | 			ieee80211_release_reorder_frame(sdata, tid_agg_rx, j, | 
 | 							frames); | 
 |  | 
 | 			/* | 
 | 			 * Increment the head seq# also for the skipped slots. | 
 | 			 */ | 
 | 			tid_agg_rx->head_seq_num = | 
 | 				(tid_agg_rx->head_seq_num + | 
 | 				 skipped) & IEEE80211_SN_MASK; | 
 | 			skipped = 0; | 
 | 		} | 
 | 	} else while (ieee80211_rx_reorder_ready(tid_agg_rx, index)) { | 
 | 		ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, | 
 | 						frames); | 
 | 		index =	tid_agg_rx->head_seq_num % tid_agg_rx->buf_size; | 
 | 	} | 
 |  | 
 | 	if (tid_agg_rx->stored_mpdu_num) { | 
 | 		j = index = tid_agg_rx->head_seq_num % tid_agg_rx->buf_size; | 
 |  | 
 | 		for (; j != (index - 1) % tid_agg_rx->buf_size; | 
 | 		     j = (j + 1) % tid_agg_rx->buf_size) { | 
 | 			if (ieee80211_rx_reorder_ready(tid_agg_rx, j)) | 
 | 				break; | 
 | 		} | 
 |  | 
 |  set_release_timer: | 
 |  | 
 | 		if (!tid_agg_rx->removed) | 
 | 			mod_timer(&tid_agg_rx->reorder_timer, | 
 | 				  tid_agg_rx->reorder_time[j] + 1 + | 
 | 				  HT_RX_REORDER_BUF_TIMEOUT); | 
 | 	} else { | 
 | 		timer_delete(&tid_agg_rx->reorder_timer); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * As this function belongs to the RX path it must be under | 
 |  * rcu_read_lock protection. It returns false if the frame | 
 |  * can be processed immediately, true if it was consumed. | 
 |  */ | 
 | static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata, | 
 | 					     struct tid_ampdu_rx *tid_agg_rx, | 
 | 					     struct sk_buff *skb, | 
 | 					     struct sk_buff_head *frames) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	u16 mpdu_seq_num = ieee80211_get_sn(hdr); | 
 | 	u16 head_seq_num, buf_size; | 
 | 	int index; | 
 | 	bool ret = true; | 
 |  | 
 | 	spin_lock(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	/* | 
 | 	 * Offloaded BA sessions have no known starting sequence number so pick | 
 | 	 * one from first Rxed frame for this tid after BA was started. | 
 | 	 */ | 
 | 	if (unlikely(tid_agg_rx->auto_seq)) { | 
 | 		tid_agg_rx->auto_seq = false; | 
 | 		tid_agg_rx->ssn = mpdu_seq_num; | 
 | 		tid_agg_rx->head_seq_num = mpdu_seq_num; | 
 | 	} | 
 |  | 
 | 	buf_size = tid_agg_rx->buf_size; | 
 | 	head_seq_num = tid_agg_rx->head_seq_num; | 
 |  | 
 | 	/* | 
 | 	 * If the current MPDU's SN is smaller than the SSN, it shouldn't | 
 | 	 * be reordered. | 
 | 	 */ | 
 | 	if (unlikely(!tid_agg_rx->started)) { | 
 | 		if (ieee80211_sn_less(mpdu_seq_num, head_seq_num)) { | 
 | 			ret = false; | 
 | 			goto out; | 
 | 		} | 
 | 		tid_agg_rx->started = true; | 
 | 	} | 
 |  | 
 | 	/* frame with out of date sequence number */ | 
 | 	if (ieee80211_sn_less(mpdu_seq_num, head_seq_num)) { | 
 | 		dev_kfree_skb(skb); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If frame the sequence number exceeds our buffering window | 
 | 	 * size release some previous frames to make room for this one. | 
 | 	 */ | 
 | 	if (!ieee80211_sn_less(mpdu_seq_num, head_seq_num + buf_size)) { | 
 | 		head_seq_num = ieee80211_sn_inc( | 
 | 				ieee80211_sn_sub(mpdu_seq_num, buf_size)); | 
 | 		/* release stored frames up to new head to stack */ | 
 | 		ieee80211_release_reorder_frames(sdata, tid_agg_rx, | 
 | 						 head_seq_num, frames); | 
 | 	} | 
 |  | 
 | 	/* Now the new frame is always in the range of the reordering buffer */ | 
 |  | 
 | 	index = mpdu_seq_num % tid_agg_rx->buf_size; | 
 |  | 
 | 	/* check if we already stored this frame */ | 
 | 	if (ieee80211_rx_reorder_ready(tid_agg_rx, index)) { | 
 | 		dev_kfree_skb(skb); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If the current MPDU is in the right order and nothing else | 
 | 	 * is stored we can process it directly, no need to buffer it. | 
 | 	 * If it is first but there's something stored, we may be able | 
 | 	 * to release frames after this one. | 
 | 	 */ | 
 | 	if (mpdu_seq_num == tid_agg_rx->head_seq_num && | 
 | 	    tid_agg_rx->stored_mpdu_num == 0) { | 
 | 		if (!(status->flag & RX_FLAG_AMSDU_MORE)) | 
 | 			tid_agg_rx->head_seq_num = | 
 | 				ieee80211_sn_inc(tid_agg_rx->head_seq_num); | 
 | 		ret = false; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* put the frame in the reordering buffer */ | 
 | 	__skb_queue_tail(&tid_agg_rx->reorder_buf[index], skb); | 
 | 	if (!(status->flag & RX_FLAG_AMSDU_MORE)) { | 
 | 		tid_agg_rx->reorder_time[index] = jiffies; | 
 | 		tid_agg_rx->stored_mpdu_num++; | 
 | 		ieee80211_sta_reorder_release(sdata, tid_agg_rx, frames); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	spin_unlock(&tid_agg_rx->reorder_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns | 
 |  * true if the MPDU was buffered, false if it should be processed. | 
 |  */ | 
 | static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, | 
 | 				       struct sk_buff_head *frames) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	struct sta_info *sta = rx->sta; | 
 | 	struct tid_ampdu_rx *tid_agg_rx; | 
 | 	u16 sc; | 
 | 	u8 tid, ack_policy; | 
 |  | 
 | 	if (!ieee80211_is_data_qos(hdr->frame_control) || | 
 | 	    is_multicast_ether_addr(hdr->addr1)) | 
 | 		goto dont_reorder; | 
 |  | 
 | 	/* | 
 | 	 * filter the QoS data rx stream according to | 
 | 	 * STA/TID and check if this STA/TID is on aggregation | 
 | 	 */ | 
 |  | 
 | 	if (!sta) | 
 | 		goto dont_reorder; | 
 |  | 
 | 	ack_policy = *ieee80211_get_qos_ctl(hdr) & | 
 | 		     IEEE80211_QOS_CTL_ACK_POLICY_MASK; | 
 | 	tid = ieee80211_get_tid(hdr); | 
 |  | 
 | 	tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]); | 
 | 	if (!tid_agg_rx) { | 
 | 		if (ack_policy == IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK && | 
 | 		    !test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) && | 
 | 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg)) | 
 | 			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, | 
 | 					     WLAN_BACK_RECIPIENT, | 
 | 					     WLAN_REASON_QSTA_REQUIRE_SETUP); | 
 | 		goto dont_reorder; | 
 | 	} | 
 |  | 
 | 	/* qos null data frames are excluded */ | 
 | 	if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC))) | 
 | 		goto dont_reorder; | 
 |  | 
 | 	/* not part of a BA session */ | 
 | 	if (ack_policy == IEEE80211_QOS_CTL_ACK_POLICY_NOACK) | 
 | 		goto dont_reorder; | 
 |  | 
 | 	/* new, potentially un-ordered, ampdu frame - process it */ | 
 |  | 
 | 	/* reset session timer */ | 
 | 	if (tid_agg_rx->timeout) | 
 | 		tid_agg_rx->last_rx = jiffies; | 
 |  | 
 | 	/* if this mpdu is fragmented - terminate rx aggregation session */ | 
 | 	sc = le16_to_cpu(hdr->seq_ctrl); | 
 | 	if (sc & IEEE80211_SCTL_FRAG) { | 
 | 		ieee80211_queue_skb_to_iface(rx->sdata, rx->link_id, NULL, skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * No locking needed -- we will only ever process one | 
 | 	 * RX packet at a time, and thus own tid_agg_rx. All | 
 | 	 * other code manipulating it needs to (and does) make | 
 | 	 * sure that we cannot get to it any more before doing | 
 | 	 * anything with it. | 
 | 	 */ | 
 | 	if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb, | 
 | 					     frames)) | 
 | 		return; | 
 |  | 
 |  dont_reorder: | 
 | 	__skb_queue_tail(frames, skb); | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_check_dup(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 |  | 
 | 	if (status->flag & RX_FLAG_DUP_VALIDATED) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Drop duplicate 802.11 retransmissions | 
 | 	 * (IEEE 802.11-2012: 9.3.2.10 "Duplicate detection and recovery") | 
 | 	 */ | 
 |  | 
 | 	if (rx->skb->len < 24) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (ieee80211_is_ctl(hdr->frame_control) || | 
 | 	    ieee80211_is_any_nullfunc(hdr->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!rx->sta) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (unlikely(is_multicast_ether_addr(hdr->addr1))) { | 
 | 		struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 		u16 sn = ieee80211_get_sn(hdr); | 
 |  | 
 | 		if (!ieee80211_is_data_present(hdr->frame_control)) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		if (!ieee80211_vif_is_mld(&sdata->vif) || | 
 | 		    sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		if (sdata->u.mgd.mcast_seq_last != IEEE80211_SN_MODULO && | 
 | 		    ieee80211_sn_less_eq(sn, sdata->u.mgd.mcast_seq_last)) | 
 | 			return RX_DROP_U_DUP; | 
 |  | 
 | 		sdata->u.mgd.mcast_seq_last = sn; | 
 | 		return RX_CONTINUE; | 
 | 	} | 
 |  | 
 | 	if (unlikely(ieee80211_has_retry(hdr->frame_control) && | 
 | 		     rx->sta->last_seq_ctrl[rx->seqno_idx] == hdr->seq_ctrl)) { | 
 | 		I802_DEBUG_INC(rx->local->dot11FrameDuplicateCount); | 
 | 		rx->link_sta->rx_stats.num_duplicates++; | 
 | 		return RX_DROP_U_DUP; | 
 | 	} else if (!(status->flag & RX_FLAG_AMSDU_MORE)) { | 
 | 		rx->sta->last_seq_ctrl[rx->seqno_idx] = hdr->seq_ctrl; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_check(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 |  | 
 | 	/* Drop disallowed frame classes based on STA auth/assoc state; | 
 | 	 * IEEE 802.11, Chap 5.5. | 
 | 	 * | 
 | 	 * mac80211 filters only based on association state, i.e. it drops | 
 | 	 * Class 3 frames from not associated stations. hostapd sends | 
 | 	 * deauth/disassoc frames when needed. In addition, hostapd is | 
 | 	 * responsible for filtering on both auth and assoc states. | 
 | 	 */ | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&rx->sdata->vif)) | 
 | 		return ieee80211_rx_mesh_check(rx); | 
 |  | 
 | 	if (unlikely((ieee80211_is_data(hdr->frame_control) || | 
 | 		      ieee80211_is_pspoll(hdr->frame_control)) && | 
 | 		     rx->sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
 | 		     rx->sdata->vif.type != NL80211_IFTYPE_OCB && | 
 | 		     (!rx->sta || !test_sta_flag(rx->sta, WLAN_STA_ASSOC)))) { | 
 | 		/* | 
 | 		 * accept port control frames from the AP even when it's not | 
 | 		 * yet marked ASSOC to prevent a race where we don't set the | 
 | 		 * assoc bit quickly enough before it sends the first frame | 
 | 		 */ | 
 | 		if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION && | 
 | 		    ieee80211_is_data_present(hdr->frame_control)) { | 
 | 			unsigned int hdrlen; | 
 | 			__be16 ethertype; | 
 |  | 
 | 			hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 |  | 
 | 			if (rx->skb->len < hdrlen + 8) | 
 | 				return RX_DROP; | 
 |  | 
 | 			skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2); | 
 | 			if (ethertype == rx->sdata->control_port_protocol) | 
 | 				return RX_CONTINUE; | 
 | 		} | 
 |  | 
 | 		if (rx->sdata->vif.type == NL80211_IFTYPE_AP && | 
 | 		    cfg80211_rx_spurious_frame(rx->sdata->dev, hdr->addr2, | 
 | 					       rx->link_id, GFP_ATOMIC)) | 
 | 			return RX_DROP_U_SPURIOUS; | 
 |  | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_check_more_data(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_local *local; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	local = rx->local; | 
 | 	skb = rx->skb; | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 |  | 
 | 	if (!local->pspolling) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!ieee80211_has_fromds(hdr->frame_control)) | 
 | 		/* this is not from AP */ | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!ieee80211_is_data(hdr->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!ieee80211_has_moredata(hdr->frame_control)) { | 
 | 		/* AP has no more frames buffered for us */ | 
 | 		local->pspolling = false; | 
 | 		return RX_CONTINUE; | 
 | 	} | 
 |  | 
 | 	/* more data bit is set, let's request a new frame from the AP */ | 
 | 	ieee80211_send_pspoll(local, rx->sdata); | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static void sta_ps_start(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ps_data *ps; | 
 | 	int tid; | 
 |  | 
 | 	if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 		ps = &sdata->bss->ps; | 
 | 	else | 
 | 		return; | 
 |  | 
 | 	atomic_inc(&ps->num_sta_ps); | 
 | 	set_sta_flag(sta, WLAN_STA_PS_STA); | 
 | 	if (!ieee80211_hw_check(&local->hw, AP_LINK_PS)) | 
 | 		drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta); | 
 | 	ps_dbg(sdata, "STA %pM aid %d enters power save mode\n", | 
 | 	       sta->sta.addr, sta->sta.aid); | 
 |  | 
 | 	ieee80211_clear_fast_xmit(sta); | 
 |  | 
 | 	for (tid = 0; tid < IEEE80211_NUM_TIDS; tid++) { | 
 | 		struct ieee80211_txq *txq = sta->sta.txq[tid]; | 
 | 		struct txq_info *txqi = to_txq_info(txq); | 
 |  | 
 | 		spin_lock(&local->active_txq_lock[txq->ac]); | 
 | 		if (!list_empty(&txqi->schedule_order)) | 
 | 			list_del_init(&txqi->schedule_order); | 
 | 		spin_unlock(&local->active_txq_lock[txq->ac]); | 
 |  | 
 | 		if (txq_has_queue(txq)) | 
 | 			set_bit(tid, &sta->txq_buffered_tids); | 
 | 		else | 
 | 			clear_bit(tid, &sta->txq_buffered_tids); | 
 | 	} | 
 | } | 
 |  | 
 | static void sta_ps_end(struct sta_info *sta) | 
 | { | 
 | 	ps_dbg(sta->sdata, "STA %pM aid %d exits power save mode\n", | 
 | 	       sta->sta.addr, sta->sta.aid); | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) { | 
 | 		/* | 
 | 		 * Clear the flag only if the other one is still set | 
 | 		 * so that the TX path won't start TX'ing new frames | 
 | 		 * directly ... In the case that the driver flag isn't | 
 | 		 * set ieee80211_sta_ps_deliver_wakeup() will clear it. | 
 | 		 */ | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_STA); | 
 | 		ps_dbg(sta->sdata, "STA %pM aid %d driver-ps-blocked\n", | 
 | 		       sta->sta.addr, sta->sta.aid); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	set_sta_flag(sta, WLAN_STA_PS_DELIVER); | 
 | 	clear_sta_flag(sta, WLAN_STA_PS_STA); | 
 | 	ieee80211_sta_ps_deliver_wakeup(sta); | 
 | } | 
 |  | 
 | int ieee80211_sta_ps_transition(struct ieee80211_sta *pubsta, bool start) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	bool in_ps; | 
 |  | 
 | 	WARN_ON(!ieee80211_hw_check(&sta->local->hw, AP_LINK_PS)); | 
 |  | 
 | 	/* Don't let the same PS state be set twice */ | 
 | 	in_ps = test_sta_flag(sta, WLAN_STA_PS_STA); | 
 | 	if ((start && in_ps) || (!start && !in_ps)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (start) | 
 | 		sta_ps_start(sta); | 
 | 	else | 
 | 		sta_ps_end(sta); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_ps_transition); | 
 |  | 
 | void ieee80211_sta_pspoll(struct ieee80211_sta *pubsta) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_SP)) | 
 | 		return; | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_DRIVER)) | 
 | 		ieee80211_sta_ps_deliver_poll_response(sta); | 
 | 	else | 
 | 		set_sta_flag(sta, WLAN_STA_PSPOLL); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_pspoll); | 
 |  | 
 | void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *pubsta, u8 tid) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	int ac = ieee80211_ac_from_tid(tid); | 
 |  | 
 | 	/* | 
 | 	 * If this AC is not trigger-enabled do nothing unless the | 
 | 	 * driver is calling us after it already checked. | 
 | 	 * | 
 | 	 * NB: This could/should check a separate bitmap of trigger- | 
 | 	 * enabled queues, but for now we only implement uAPSD w/o | 
 | 	 * TSPEC changes to the ACs, so they're always the same. | 
 | 	 */ | 
 | 	if (!(sta->sta.uapsd_queues & ieee80211_ac_to_qos_mask[ac]) && | 
 | 	    tid != IEEE80211_NUM_TIDS) | 
 | 		return; | 
 |  | 
 | 	/* if we are in a service period, do nothing */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_SP)) | 
 | 		return; | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_DRIVER)) | 
 | 		ieee80211_sta_ps_deliver_uapsd(sta); | 
 | 	else | 
 | 		set_sta_flag(sta, WLAN_STA_UAPSD); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_uapsd_trigger); | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_uapsd_and_pspoll(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_hdr *hdr = (void *)rx->skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 |  | 
 | 	if (!rx->sta) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * The device handles station powersave, so don't do anything about | 
 | 	 * uAPSD and PS-Poll frames (the latter shouldn't even come up from | 
 | 	 * it to mac80211 since they're handled.) | 
 | 	 */ | 
 | 	if (ieee80211_hw_check(&sdata->local->hw, AP_LINK_PS)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Don't do anything if the station isn't already asleep. In | 
 | 	 * the uAPSD case, the station will probably be marked asleep, | 
 | 	 * in the PS-Poll case the station must be confused ... | 
 | 	 */ | 
 | 	if (!test_sta_flag(rx->sta, WLAN_STA_PS_STA)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) { | 
 | 		ieee80211_sta_pspoll(&rx->sta->sta); | 
 |  | 
 | 		/* Free PS Poll skb here instead of returning RX_DROP that would | 
 | 		 * count as an dropped frame. */ | 
 | 		dev_kfree_skb(rx->skb); | 
 |  | 
 | 		return RX_QUEUED; | 
 | 	} else if (!ieee80211_has_morefrags(hdr->frame_control) && | 
 | 		   !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) && | 
 | 		   ieee80211_has_pm(hdr->frame_control) && | 
 | 		   (ieee80211_is_data_qos(hdr->frame_control) || | 
 | 		    ieee80211_is_qos_nullfunc(hdr->frame_control))) { | 
 | 		u8 tid = ieee80211_get_tid(hdr); | 
 |  | 
 | 		ieee80211_sta_uapsd_trigger(&rx->sta->sta, tid); | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct sta_info *sta = rx->sta; | 
 | 	struct link_sta_info *link_sta = rx->link_sta; | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	int i; | 
 |  | 
 | 	if (!sta || !link_sta) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Update last_rx only for IBSS packets which are for the current | 
 | 	 * BSSID and for station already AUTHORIZED to avoid keeping the | 
 | 	 * current IBSS network alive in cases where other STAs start | 
 | 	 * using different BSSID. This will also give the station another | 
 | 	 * chance to restart the authentication/authorization in case | 
 | 	 * something went wrong the first time. | 
 | 	 */ | 
 | 	if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
 | 		u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, | 
 | 						NL80211_IFTYPE_ADHOC); | 
 | 		if (ether_addr_equal(bssid, rx->sdata->u.ibss.bssid) && | 
 | 		    test_sta_flag(sta, WLAN_STA_AUTHORIZED)) { | 
 | 			link_sta->rx_stats.last_rx = jiffies; | 
 | 			if (ieee80211_is_data_present(hdr->frame_control) && | 
 | 			    !is_multicast_ether_addr(hdr->addr1)) | 
 | 				link_sta->rx_stats.last_rate = | 
 | 					sta_stats_encode_rate(status); | 
 | 		} | 
 | 	} else if (rx->sdata->vif.type == NL80211_IFTYPE_OCB) { | 
 | 		link_sta->rx_stats.last_rx = jiffies; | 
 | 	} else if (!ieee80211_is_s1g_beacon(hdr->frame_control) && | 
 | 		   !is_multicast_ether_addr(hdr->addr1)) { | 
 | 		/* | 
 | 		 * Mesh beacons will update last_rx when if they are found to | 
 | 		 * match the current local configuration when processed. | 
 | 		 */ | 
 | 		link_sta->rx_stats.last_rx = jiffies; | 
 | 		if (ieee80211_is_data_present(hdr->frame_control)) | 
 | 			link_sta->rx_stats.last_rate = sta_stats_encode_rate(status); | 
 | 	} | 
 |  | 
 | 	link_sta->rx_stats.fragments++; | 
 |  | 
 | 	u64_stats_update_begin(&link_sta->rx_stats.syncp); | 
 | 	link_sta->rx_stats.bytes += rx->skb->len; | 
 | 	u64_stats_update_end(&link_sta->rx_stats.syncp); | 
 |  | 
 | 	if (!(status->flag & RX_FLAG_NO_SIGNAL_VAL)) { | 
 | 		link_sta->rx_stats.last_signal = status->signal; | 
 | 		ewma_signal_add(&link_sta->rx_stats_avg.signal, | 
 | 				-status->signal); | 
 | 	} | 
 |  | 
 | 	if (status->chains) { | 
 | 		link_sta->rx_stats.chains = status->chains; | 
 | 		for (i = 0; i < ARRAY_SIZE(status->chain_signal); i++) { | 
 | 			int signal = status->chain_signal[i]; | 
 |  | 
 | 			if (!(status->chains & BIT(i))) | 
 | 				continue; | 
 |  | 
 | 			link_sta->rx_stats.chain_signal_last[i] = signal; | 
 | 			ewma_signal_add(&link_sta->rx_stats_avg.chain_signal[i], | 
 | 					-signal); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ieee80211_is_s1g_beacon(hdr->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Change STA power saving mode only at the end of a frame | 
 | 	 * exchange sequence, and only for a data or management | 
 | 	 * frame as specified in IEEE 802.11-2016 11.2.3.2 | 
 | 	 */ | 
 | 	if (!ieee80211_hw_check(&sta->local->hw, AP_LINK_PS) && | 
 | 	    !ieee80211_has_morefrags(hdr->frame_control) && | 
 | 	    !is_multicast_ether_addr(hdr->addr1) && | 
 | 	    (ieee80211_is_mgmt(hdr->frame_control) || | 
 | 	     ieee80211_is_data(hdr->frame_control)) && | 
 | 	    !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) && | 
 | 	    (rx->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	     rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) { | 
 | 		if (test_sta_flag(sta, WLAN_STA_PS_STA)) { | 
 | 			if (!ieee80211_has_pm(hdr->frame_control)) | 
 | 				sta_ps_end(sta); | 
 | 		} else { | 
 | 			if (ieee80211_has_pm(hdr->frame_control)) | 
 | 				sta_ps_start(sta); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* mesh power save support */ | 
 | 	if (ieee80211_vif_is_mesh(&rx->sdata->vif)) | 
 | 		ieee80211_mps_rx_h_sta_process(sta, hdr); | 
 |  | 
 | 	/* | 
 | 	 * Drop (qos-)data::nullfunc frames silently, since they | 
 | 	 * are used only to control station power saving mode. | 
 | 	 */ | 
 | 	if (ieee80211_is_any_nullfunc(hdr->frame_control)) { | 
 | 		I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc); | 
 |  | 
 | 		/* | 
 | 		 * If we receive a 4-addr nullfunc frame from a STA | 
 | 		 * that was not moved to a 4-addr STA vlan yet send | 
 | 		 * the event to userspace and for older hostapd drop | 
 | 		 * the frame to the monitor interface. | 
 | 		 */ | 
 | 		if (ieee80211_has_a4(hdr->frame_control) && | 
 | 		    (rx->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 		     (rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 		      !rx->sdata->u.vlan.sta))) { | 
 | 			if (!test_and_set_sta_flag(sta, WLAN_STA_4ADDR_EVENT)) | 
 | 				cfg80211_rx_unexpected_4addr_frame( | 
 | 					rx->sdata->dev, sta->sta.addr, | 
 | 					rx->link_id, GFP_ATOMIC); | 
 | 			return RX_DROP_U_UNEXPECTED_4ADDR_FRAME; | 
 | 		} | 
 | 		/* | 
 | 		 * Update counter and free packet here to avoid | 
 | 		 * counting this as a dropped packed. | 
 | 		 */ | 
 | 		link_sta->rx_stats.packets++; | 
 | 		dev_kfree_skb(rx->skb); | 
 | 		return RX_QUEUED; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } /* ieee80211_rx_h_sta_process */ | 
 |  | 
 | static struct ieee80211_key * | 
 | ieee80211_rx_get_bigtk(struct ieee80211_rx_data *rx, int idx) | 
 | { | 
 | 	struct ieee80211_key *key = NULL; | 
 | 	int idx2; | 
 |  | 
 | 	/* Make sure key gets set if either BIGTK key index is set so that | 
 | 	 * ieee80211_drop_unencrypted_mgmt() can properly drop both unprotected | 
 | 	 * Beacon frames and Beacon frames that claim to use another BIGTK key | 
 | 	 * index (i.e., a key that we do not have). | 
 | 	 */ | 
 |  | 
 | 	if (idx < 0) { | 
 | 		idx = NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS; | 
 | 		idx2 = idx + 1; | 
 | 	} else { | 
 | 		if (idx == NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) | 
 | 			idx2 = idx + 1; | 
 | 		else | 
 | 			idx2 = idx - 1; | 
 | 	} | 
 |  | 
 | 	if (rx->link_sta) | 
 | 		key = rcu_dereference(rx->link_sta->gtk[idx]); | 
 | 	if (!key) | 
 | 		key = rcu_dereference(rx->link->gtk[idx]); | 
 | 	if (!key && rx->link_sta) | 
 | 		key = rcu_dereference(rx->link_sta->gtk[idx2]); | 
 | 	if (!key) | 
 | 		key = rcu_dereference(rx->link->gtk[idx2]); | 
 |  | 
 | 	return key; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	int keyidx; | 
 | 	ieee80211_rx_result result = RX_DROP_U_DECRYPT_FAIL; | 
 | 	struct ieee80211_key *sta_ptk = NULL; | 
 | 	struct ieee80211_key *ptk_idx = NULL; | 
 | 	int mmie_keyidx = -1; | 
 | 	__le16 fc; | 
 |  | 
 | 	if (ieee80211_is_ext(hdr->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Key selection 101 | 
 | 	 * | 
 | 	 * There are five types of keys: | 
 | 	 *  - GTK (group keys) | 
 | 	 *  - IGTK (group keys for management frames) | 
 | 	 *  - BIGTK (group keys for Beacon frames) | 
 | 	 *  - PTK (pairwise keys) | 
 | 	 *  - STK (station-to-station pairwise keys) | 
 | 	 * | 
 | 	 * When selecting a key, we have to distinguish between multicast | 
 | 	 * (including broadcast) and unicast frames, the latter can only | 
 | 	 * use PTKs and STKs while the former always use GTKs, IGTKs, and | 
 | 	 * BIGTKs. Unless, of course, actual WEP keys ("pre-RSNA") are used, | 
 | 	 * then unicast frames can also use key indices like GTKs. Hence, if we | 
 | 	 * don't have a PTK/STK we check the key index for a WEP key. | 
 | 	 * | 
 | 	 * Note that in a regular BSS, multicast frames are sent by the | 
 | 	 * AP only, associated stations unicast the frame to the AP first | 
 | 	 * which then multicasts it on their behalf. | 
 | 	 * | 
 | 	 * There is also a slight problem in IBSS mode: GTKs are negotiated | 
 | 	 * with each station, that is something we don't currently handle. | 
 | 	 * The spec seems to expect that one negotiates the same key with | 
 | 	 * every station but there's no such requirement; VLANs could be | 
 | 	 * possible. | 
 | 	 */ | 
 |  | 
 | 	/* start without a key */ | 
 | 	rx->key = NULL; | 
 | 	fc = hdr->frame_control; | 
 |  | 
 | 	if (rx->sta) { | 
 | 		int keyid = rx->sta->ptk_idx; | 
 | 		sta_ptk = rcu_dereference(rx->sta->ptk[keyid]); | 
 |  | 
 | 		if (ieee80211_has_protected(fc) && | 
 | 		    !(status->flag & RX_FLAG_IV_STRIPPED)) { | 
 | 			keyid = ieee80211_get_keyid(rx->skb); | 
 |  | 
 | 			if (unlikely(keyid < 0)) | 
 | 				return RX_DROP_U_NO_KEY_ID; | 
 |  | 
 | 			ptk_idx = rcu_dereference(rx->sta->ptk[keyid]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!ieee80211_has_protected(fc)) | 
 | 		mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb); | 
 |  | 
 | 	if (!is_multicast_ether_addr(hdr->addr1) && sta_ptk) { | 
 | 		rx->key = ptk_idx ? ptk_idx : sta_ptk; | 
 | 		if ((status->flag & RX_FLAG_DECRYPTED) && | 
 | 		    (status->flag & RX_FLAG_IV_STRIPPED)) | 
 | 			return RX_CONTINUE; | 
 | 		/* Skip decryption if the frame is not protected. */ | 
 | 		if (!ieee80211_has_protected(fc)) | 
 | 			return RX_CONTINUE; | 
 | 	} else if (mmie_keyidx >= 0 && ieee80211_is_beacon(fc)) { | 
 | 		/* Broadcast/multicast robust management frame / BIP */ | 
 | 		if ((status->flag & RX_FLAG_DECRYPTED) && | 
 | 		    (status->flag & RX_FLAG_IV_STRIPPED)) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		if (mmie_keyidx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS || | 
 | 		    mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS + | 
 | 				   NUM_DEFAULT_BEACON_KEYS) { | 
 | 			if (rx->sdata->dev) | 
 | 				cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev, | 
 | 							     skb->data, | 
 | 							     skb->len); | 
 | 			return RX_DROP_U_BAD_BCN_KEYIDX; | 
 | 		} | 
 |  | 
 | 		rx->key = ieee80211_rx_get_bigtk(rx, mmie_keyidx); | 
 | 		if (!rx->key) | 
 | 			return RX_CONTINUE; /* Beacon protection not in use */ | 
 | 	} else if (mmie_keyidx >= 0) { | 
 | 		/* Broadcast/multicast robust management frame / BIP */ | 
 | 		if ((status->flag & RX_FLAG_DECRYPTED) && | 
 | 		    (status->flag & RX_FLAG_IV_STRIPPED)) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		if (mmie_keyidx < NUM_DEFAULT_KEYS || | 
 | 		    mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) | 
 | 			return RX_DROP_U_BAD_MGMT_KEYIDX; /* unexpected BIP keyidx */ | 
 | 		if (rx->link_sta) { | 
 | 			if (ieee80211_is_group_privacy_action(skb) && | 
 | 			    test_sta_flag(rx->sta, WLAN_STA_MFP)) | 
 | 				return RX_DROP; | 
 |  | 
 | 			rx->key = rcu_dereference(rx->link_sta->gtk[mmie_keyidx]); | 
 | 		} | 
 | 		if (!rx->key) | 
 | 			rx->key = rcu_dereference(rx->link->gtk[mmie_keyidx]); | 
 | 	} else if (!ieee80211_has_protected(fc)) { | 
 | 		/* | 
 | 		 * The frame was not protected, so skip decryption. However, we | 
 | 		 * need to set rx->key if there is a key that could have been | 
 | 		 * used so that the frame may be dropped if encryption would | 
 | 		 * have been expected. | 
 | 		 */ | 
 | 		struct ieee80211_key *key = NULL; | 
 | 		int i; | 
 |  | 
 | 		if (ieee80211_is_beacon(fc)) { | 
 | 			key = ieee80211_rx_get_bigtk(rx, -1); | 
 | 		} else if (ieee80211_is_mgmt(fc) && | 
 | 			   is_multicast_ether_addr(hdr->addr1)) { | 
 | 			key = rcu_dereference(rx->link->default_mgmt_key); | 
 | 		} else { | 
 | 			if (rx->link_sta) { | 
 | 				for (i = 0; i < NUM_DEFAULT_KEYS; i++) { | 
 | 					key = rcu_dereference(rx->link_sta->gtk[i]); | 
 | 					if (key) | 
 | 						break; | 
 | 				} | 
 | 			} | 
 | 			if (!key) { | 
 | 				for (i = 0; i < NUM_DEFAULT_KEYS; i++) { | 
 | 					key = rcu_dereference(rx->link->gtk[i]); | 
 | 					if (key) | 
 | 						break; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		if (key) | 
 | 			rx->key = key; | 
 | 		return RX_CONTINUE; | 
 | 	} else { | 
 | 		/* | 
 | 		 * The device doesn't give us the IV so we won't be | 
 | 		 * able to look up the key. That's ok though, we | 
 | 		 * don't need to decrypt the frame, we just won't | 
 | 		 * be able to keep statistics accurate. | 
 | 		 * Except for key threshold notifications, should | 
 | 		 * we somehow allow the driver to tell us which key | 
 | 		 * the hardware used if this flag is set? | 
 | 		 */ | 
 | 		if ((status->flag & RX_FLAG_DECRYPTED) && | 
 | 		    (status->flag & RX_FLAG_IV_STRIPPED)) | 
 | 			return RX_CONTINUE; | 
 |  | 
 | 		keyidx = ieee80211_get_keyid(rx->skb); | 
 |  | 
 | 		if (unlikely(keyidx < 0)) | 
 | 			return RX_DROP_U_NO_KEY_ID; | 
 |  | 
 | 		/* check per-station GTK first, if multicast packet */ | 
 | 		if (is_multicast_ether_addr(hdr->addr1) && rx->link_sta) | 
 | 			rx->key = rcu_dereference(rx->link_sta->gtk[keyidx]); | 
 |  | 
 | 		/* if not found, try default key */ | 
 | 		if (!rx->key) { | 
 | 			if (is_multicast_ether_addr(hdr->addr1)) | 
 | 				rx->key = rcu_dereference(rx->link->gtk[keyidx]); | 
 | 			if (!rx->key) | 
 | 				rx->key = rcu_dereference(rx->sdata->keys[keyidx]); | 
 |  | 
 | 			/* | 
 | 			 * RSNA-protected unicast frames should always be | 
 | 			 * sent with pairwise or station-to-station keys, | 
 | 			 * but for WEP we allow using a key index as well. | 
 | 			 */ | 
 | 			if (rx->key && | 
 | 			    rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 && | 
 | 			    rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 && | 
 | 			    !is_multicast_ether_addr(hdr->addr1)) | 
 | 				rx->key = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (rx->key) { | 
 | 		if (unlikely(rx->key->flags & KEY_FLAG_TAINTED)) | 
 | 			return RX_DROP; | 
 |  | 
 | 		/* TODO: add threshold stuff again */ | 
 | 	} else { | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	switch (rx->key->conf.cipher) { | 
 | 	case WLAN_CIPHER_SUITE_WEP40: | 
 | 	case WLAN_CIPHER_SUITE_WEP104: | 
 | 		result = ieee80211_crypto_wep_decrypt(rx); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_TKIP: | 
 | 		result = ieee80211_crypto_tkip_decrypt(rx); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_CCMP: | 
 | 		result = ieee80211_crypto_ccmp_decrypt( | 
 | 			rx, IEEE80211_CCMP_MIC_LEN); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_CCMP_256: | 
 | 		result = ieee80211_crypto_ccmp_decrypt( | 
 | 			rx, IEEE80211_CCMP_256_MIC_LEN); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 		result = ieee80211_crypto_aes_cmac_decrypt(rx); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
 | 		result = ieee80211_crypto_aes_cmac_256_decrypt(rx); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
 | 		result = ieee80211_crypto_aes_gmac_decrypt(rx); | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_GCMP: | 
 | 	case WLAN_CIPHER_SUITE_GCMP_256: | 
 | 		result = ieee80211_crypto_gcmp_decrypt(rx); | 
 | 		break; | 
 | 	default: | 
 | 		result = RX_DROP_U_BAD_CIPHER; | 
 | 	} | 
 |  | 
 | 	/* the hdr variable is invalid after the decrypt handlers */ | 
 |  | 
 | 	/* either the frame has been decrypted or will be dropped */ | 
 | 	status->flag |= RX_FLAG_DECRYPTED; | 
 |  | 
 | 	if (unlikely(ieee80211_is_beacon(fc) && RX_RES_IS_UNUSABLE(result) && | 
 | 		     rx->sdata->dev)) | 
 | 		cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev, | 
 | 					     skb->data, skb->len); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | void ieee80211_init_frag_cache(struct ieee80211_fragment_cache *cache) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(cache->entries); i++) | 
 | 		skb_queue_head_init(&cache->entries[i].skb_list); | 
 | } | 
 |  | 
 | void ieee80211_destroy_frag_cache(struct ieee80211_fragment_cache *cache) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(cache->entries); i++) | 
 | 		__skb_queue_purge(&cache->entries[i].skb_list); | 
 | } | 
 |  | 
 | static inline struct ieee80211_fragment_entry * | 
 | ieee80211_reassemble_add(struct ieee80211_fragment_cache *cache, | 
 | 			 unsigned int frag, unsigned int seq, int rx_queue, | 
 | 			 struct sk_buff **skb) | 
 | { | 
 | 	struct ieee80211_fragment_entry *entry; | 
 |  | 
 | 	entry = &cache->entries[cache->next++]; | 
 | 	if (cache->next >= IEEE80211_FRAGMENT_MAX) | 
 | 		cache->next = 0; | 
 |  | 
 | 	__skb_queue_purge(&entry->skb_list); | 
 |  | 
 | 	__skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */ | 
 | 	*skb = NULL; | 
 | 	entry->first_frag_time = jiffies; | 
 | 	entry->seq = seq; | 
 | 	entry->rx_queue = rx_queue; | 
 | 	entry->last_frag = frag; | 
 | 	entry->check_sequential_pn = false; | 
 | 	entry->extra_len = 0; | 
 |  | 
 | 	return entry; | 
 | } | 
 |  | 
 | static inline struct ieee80211_fragment_entry * | 
 | ieee80211_reassemble_find(struct ieee80211_fragment_cache *cache, | 
 | 			  unsigned int frag, unsigned int seq, | 
 | 			  int rx_queue, struct ieee80211_hdr *hdr) | 
 | { | 
 | 	struct ieee80211_fragment_entry *entry; | 
 | 	int i, idx; | 
 |  | 
 | 	idx = cache->next; | 
 | 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) { | 
 | 		struct ieee80211_hdr *f_hdr; | 
 | 		struct sk_buff *f_skb; | 
 |  | 
 | 		idx--; | 
 | 		if (idx < 0) | 
 | 			idx = IEEE80211_FRAGMENT_MAX - 1; | 
 |  | 
 | 		entry = &cache->entries[idx]; | 
 | 		if (skb_queue_empty(&entry->skb_list) || entry->seq != seq || | 
 | 		    entry->rx_queue != rx_queue || | 
 | 		    entry->last_frag + 1 != frag) | 
 | 			continue; | 
 |  | 
 | 		f_skb = __skb_peek(&entry->skb_list); | 
 | 		f_hdr = (struct ieee80211_hdr *) f_skb->data; | 
 |  | 
 | 		/* | 
 | 		 * Check ftype and addresses are equal, else check next fragment | 
 | 		 */ | 
 | 		if (((hdr->frame_control ^ f_hdr->frame_control) & | 
 | 		     cpu_to_le16(IEEE80211_FCTL_FTYPE)) || | 
 | 		    !ether_addr_equal(hdr->addr1, f_hdr->addr1) || | 
 | 		    !ether_addr_equal(hdr->addr2, f_hdr->addr2)) | 
 | 			continue; | 
 |  | 
 | 		if (time_after(jiffies, entry->first_frag_time + 2 * HZ)) { | 
 | 			__skb_queue_purge(&entry->skb_list); | 
 | 			continue; | 
 | 		} | 
 | 		return entry; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static bool requires_sequential_pn(struct ieee80211_rx_data *rx, __le16 fc) | 
 | { | 
 | 	return rx->key && | 
 | 		(rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP || | 
 | 		 rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 || | 
 | 		 rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP || | 
 | 		 rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) && | 
 | 		ieee80211_has_protected(fc); | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_fragment_cache *cache = &rx->sdata->frags; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	u16 sc; | 
 | 	__le16 fc; | 
 | 	unsigned int frag, seq; | 
 | 	struct ieee80211_fragment_entry *entry; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	fc = hdr->frame_control; | 
 |  | 
 | 	if (ieee80211_is_ctl(fc) || ieee80211_is_ext(fc)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	sc = le16_to_cpu(hdr->seq_ctrl); | 
 | 	frag = sc & IEEE80211_SCTL_FRAG; | 
 |  | 
 | 	if (rx->sta) | 
 | 		cache = &rx->sta->frags; | 
 |  | 
 | 	if (likely(!ieee80211_has_morefrags(fc) && frag == 0)) | 
 | 		goto out; | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	I802_DEBUG_INC(rx->local->rx_handlers_fragments); | 
 |  | 
 | 	if (skb_linearize(rx->skb)) | 
 | 		return RX_DROP_U_OOM; | 
 |  | 
 | 	/* | 
 | 	 *  skb_linearize() might change the skb->data and | 
 | 	 *  previously cached variables (in this case, hdr) need to | 
 | 	 *  be refreshed with the new data. | 
 | 	 */ | 
 | 	hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	seq = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
 |  | 
 | 	if (frag == 0) { | 
 | 		/* This is the first fragment of a new frame. */ | 
 | 		entry = ieee80211_reassemble_add(cache, frag, seq, | 
 | 						 rx->seqno_idx, &(rx->skb)); | 
 | 		if (requires_sequential_pn(rx, fc)) { | 
 | 			int queue = rx->security_idx; | 
 |  | 
 | 			/* Store CCMP/GCMP PN so that we can verify that the | 
 | 			 * next fragment has a sequential PN value. | 
 | 			 */ | 
 | 			entry->check_sequential_pn = true; | 
 | 			entry->is_protected = true; | 
 | 			entry->key_color = rx->key->color; | 
 | 			memcpy(entry->last_pn, | 
 | 			       rx->key->u.ccmp.rx_pn[queue], | 
 | 			       IEEE80211_CCMP_PN_LEN); | 
 | 			BUILD_BUG_ON(offsetof(struct ieee80211_key, | 
 | 					      u.ccmp.rx_pn) != | 
 | 				     offsetof(struct ieee80211_key, | 
 | 					      u.gcmp.rx_pn)); | 
 | 			BUILD_BUG_ON(sizeof(rx->key->u.ccmp.rx_pn[queue]) != | 
 | 				     sizeof(rx->key->u.gcmp.rx_pn[queue])); | 
 | 			BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN != | 
 | 				     IEEE80211_GCMP_PN_LEN); | 
 | 		} else if (rx->key && | 
 | 			   (ieee80211_has_protected(fc) || | 
 | 			    (status->flag & RX_FLAG_DECRYPTED))) { | 
 | 			entry->is_protected = true; | 
 | 			entry->key_color = rx->key->color; | 
 | 		} | 
 | 		return RX_QUEUED; | 
 | 	} | 
 |  | 
 | 	/* This is a fragment for a frame that should already be pending in | 
 | 	 * fragment cache. Add this fragment to the end of the pending entry. | 
 | 	 */ | 
 | 	entry = ieee80211_reassemble_find(cache, frag, seq, | 
 | 					  rx->seqno_idx, hdr); | 
 | 	if (!entry) { | 
 | 		I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	/* "The receiver shall discard MSDUs and MMPDUs whose constituent | 
 | 	 *  MPDU PN values are not incrementing in steps of 1." | 
 | 	 * see IEEE P802.11-REVmc/D5.0, 12.5.3.4.4, item d (for CCMP) | 
 | 	 * and IEEE P802.11-REVmc/D5.0, 12.5.5.4.4, item d (for GCMP) | 
 | 	 */ | 
 | 	if (entry->check_sequential_pn) { | 
 | 		int i; | 
 | 		u8 pn[IEEE80211_CCMP_PN_LEN], *rpn; | 
 |  | 
 | 		if (!requires_sequential_pn(rx, fc)) | 
 | 			return RX_DROP_U_NONSEQ_PN; | 
 |  | 
 | 		/* Prevent mixed key and fragment cache attacks */ | 
 | 		if (entry->key_color != rx->key->color) | 
 | 			return RX_DROP_U_BAD_KEY_COLOR; | 
 |  | 
 | 		memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN); | 
 | 		for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) { | 
 | 			pn[i]++; | 
 | 			if (pn[i]) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		rpn = rx->ccm_gcm.pn; | 
 | 		if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN)) | 
 | 			return RX_DROP_U_REPLAY; | 
 | 		memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN); | 
 | 	} else if (entry->is_protected && | 
 | 		   (!rx->key || | 
 | 		    (!ieee80211_has_protected(fc) && | 
 | 		     !(status->flag & RX_FLAG_DECRYPTED)) || | 
 | 		    rx->key->color != entry->key_color)) { | 
 | 		/* Drop this as a mixed key or fragment cache attack, even | 
 | 		 * if for TKIP Michael MIC should protect us, and WEP is a | 
 | 		 * lost cause anyway. | 
 | 		 */ | 
 | 		return RX_DROP_U_EXPECT_DEFRAG_PROT; | 
 | 	} else if (entry->is_protected && rx->key && | 
 | 		   entry->key_color != rx->key->color && | 
 | 		   (status->flag & RX_FLAG_DECRYPTED)) { | 
 | 		return RX_DROP_U_BAD_KEY_COLOR; | 
 | 	} | 
 |  | 
 | 	skb_pull(rx->skb, ieee80211_hdrlen(fc)); | 
 | 	__skb_queue_tail(&entry->skb_list, rx->skb); | 
 | 	entry->last_frag = frag; | 
 | 	entry->extra_len += rx->skb->len; | 
 | 	if (ieee80211_has_morefrags(fc)) { | 
 | 		rx->skb = NULL; | 
 | 		return RX_QUEUED; | 
 | 	} | 
 |  | 
 | 	rx->skb = __skb_dequeue(&entry->skb_list); | 
 | 	if (skb_tailroom(rx->skb) < entry->extra_len) { | 
 | 		I802_DEBUG_INC(rx->local->rx_expand_skb_head_defrag); | 
 | 		if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len, | 
 | 					      GFP_ATOMIC))) { | 
 | 			I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
 | 			__skb_queue_purge(&entry->skb_list); | 
 | 			return RX_DROP_U_OOM; | 
 | 		} | 
 | 	} | 
 | 	while ((skb = __skb_dequeue(&entry->skb_list))) { | 
 | 		skb_put_data(rx->skb, skb->data, skb->len); | 
 | 		dev_kfree_skb(skb); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	ieee80211_led_rx(rx->local); | 
 | 	if (rx->sta) | 
 | 		rx->link_sta->rx_stats.packets++; | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	if (unlikely(!rx->sta || !test_sta_flag(rx->sta, WLAN_STA_AUTHORIZED))) | 
 | 		return -EACCES; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 |  | 
 | 	/* | 
 | 	 * Pass through unencrypted frames if the hardware has | 
 | 	 * decrypted them already. | 
 | 	 */ | 
 | 	if (status->flag & RX_FLAG_DECRYPTED) | 
 | 		return 0; | 
 |  | 
 | 	/* Drop unencrypted frames if key is set. */ | 
 | 	if (unlikely(!ieee80211_has_protected(fc) && | 
 | 		     !ieee80211_is_any_nullfunc(fc) && | 
 | 		     ieee80211_is_data(fc) && rx->key)) | 
 | 		return -EACCES; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | VISIBLE_IF_MAC80211_KUNIT ieee80211_rx_result | 
 | ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 | 	struct ieee80211_mgmt *mgmt = (void *)rx->skb->data; | 
 | 	__le16 fc = mgmt->frame_control; | 
 |  | 
 | 	/* | 
 | 	 * Pass through unencrypted frames if the hardware has | 
 | 	 * decrypted them already. | 
 | 	 */ | 
 | 	if (status->flag & RX_FLAG_DECRYPTED) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* drop unicast protected dual (that wasn't protected) */ | 
 | 	if (ieee80211_is_action(fc) && | 
 | 	    mgmt->u.action.category == WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION) | 
 | 		return RX_DROP_U_UNPROT_DUAL; | 
 |  | 
 | 	if (rx->sta && test_sta_flag(rx->sta, WLAN_STA_MFP)) { | 
 | 		if (unlikely(!ieee80211_has_protected(fc) && | 
 | 			     ieee80211_is_unicast_robust_mgmt_frame(rx->skb))) { | 
 | 			if (ieee80211_is_deauth(fc) || | 
 | 			    ieee80211_is_disassoc(fc)) { | 
 | 				/* | 
 | 				 * Permit unprotected deauth/disassoc frames | 
 | 				 * during 4-way-HS (key is installed after HS). | 
 | 				 */ | 
 | 				if (!rx->key) | 
 | 					return RX_CONTINUE; | 
 |  | 
 | 				cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev, | 
 | 							     rx->skb->data, | 
 | 							     rx->skb->len); | 
 | 			} | 
 | 			return RX_DROP_U_UNPROT_UCAST_MGMT; | 
 | 		} | 
 | 		/* BIP does not use Protected field, so need to check MMIE */ | 
 | 		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) && | 
 | 			     ieee80211_get_mmie_keyidx(rx->skb) < 0)) { | 
 | 			if (ieee80211_is_deauth(fc) || | 
 | 			    ieee80211_is_disassoc(fc)) | 
 | 				cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev, | 
 | 							     rx->skb->data, | 
 | 							     rx->skb->len); | 
 | 			return RX_DROP_U_UNPROT_MCAST_MGMT; | 
 | 		} | 
 | 		if (unlikely(ieee80211_is_beacon(fc) && rx->key && | 
 | 			     ieee80211_get_mmie_keyidx(rx->skb) < 0)) { | 
 | 			cfg80211_rx_unprot_mlme_mgmt(rx->sdata->dev, | 
 | 						     rx->skb->data, | 
 | 						     rx->skb->len); | 
 | 			return RX_DROP_U_UNPROT_BEACON; | 
 | 		} | 
 | 		/* | 
 | 		 * When using MFP, Action frames are not allowed prior to | 
 | 		 * having configured keys. | 
 | 		 */ | 
 | 		if (unlikely(ieee80211_is_action(fc) && !rx->key && | 
 | 			     ieee80211_is_robust_mgmt_frame(rx->skb))) | 
 | 			return RX_DROP_U_UNPROT_ACTION; | 
 |  | 
 | 		/* drop unicast public action frames when using MPF */ | 
 | 		if (is_unicast_ether_addr(mgmt->da) && | 
 | 		    ieee80211_is_protected_dual_of_public_action(rx->skb)) | 
 | 			return RX_DROP_U_UNPROT_UNICAST_PUB_ACTION; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Drop robust action frames before assoc regardless of MFP state, | 
 | 	 * after assoc we also have decided on MFP or not. | 
 | 	 */ | 
 | 	if (ieee80211_is_action(fc) && | 
 | 	    ieee80211_is_robust_mgmt_frame(rx->skb) && | 
 | 	    (!rx->sta || !test_sta_flag(rx->sta, WLAN_STA_ASSOC))) | 
 | 		return RX_DROP_U_UNPROT_ROBUST_ACTION; | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 | EXPORT_SYMBOL_IF_MAC80211_KUNIT(ieee80211_drop_unencrypted_mgmt); | 
 |  | 
 | static ieee80211_rx_result | 
 | __ieee80211_data_to_8023(struct ieee80211_rx_data *rx, bool *port_control) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	bool check_port_control = false; | 
 | 	struct ethhdr *ehdr; | 
 | 	int ret; | 
 |  | 
 | 	*port_control = false; | 
 | 	if (ieee80211_has_a4(hdr->frame_control) && | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta) | 
 | 		return RX_DROP_U_UNEXPECTED_VLAN_4ADDR; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
 | 	    !!sdata->u.mgd.use_4addr != !!ieee80211_has_a4(hdr->frame_control)) { | 
 | 		if (!sdata->u.mgd.use_4addr) | 
 | 			return RX_DROP_U_UNEXPECTED_STA_4ADDR; | 
 | 		else if (!ether_addr_equal(hdr->addr1, sdata->vif.addr)) | 
 | 			check_port_control = true; | 
 | 	} | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1) && | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta) | 
 | 		return RX_DROP_U_UNEXPECTED_VLAN_MCAST; | 
 |  | 
 | 	ret = ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type); | 
 | 	if (ret < 0) | 
 | 		return RX_DROP_U_INVALID_8023; | 
 |  | 
 | 	ehdr = (struct ethhdr *) rx->skb->data; | 
 | 	if (ehdr->h_proto == rx->sdata->control_port_protocol) | 
 | 		*port_control = true; | 
 | 	else if (check_port_control) | 
 | 		return RX_DROP_U_NOT_PORT_CONTROL; | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | bool ieee80211_is_our_addr(struct ieee80211_sub_if_data *sdata, | 
 | 			   const u8 *addr, int *out_link_id) | 
 | { | 
 | 	unsigned int link_id; | 
 |  | 
 | 	/* non-MLO, or MLD address replaced by hardware */ | 
 | 	if (ether_addr_equal(sdata->vif.addr, addr)) | 
 | 		return true; | 
 |  | 
 | 	if (!ieee80211_vif_is_mld(&sdata->vif)) | 
 | 		return false; | 
 |  | 
 | 	for (link_id = 0; link_id < ARRAY_SIZE(sdata->vif.link_conf); link_id++) { | 
 | 		struct ieee80211_bss_conf *conf; | 
 |  | 
 | 		conf = rcu_dereference(sdata->vif.link_conf[link_id]); | 
 |  | 
 | 		if (!conf) | 
 | 			continue; | 
 | 		if (ether_addr_equal(conf->addr, addr)) { | 
 | 			if (out_link_id) | 
 | 				*out_link_id = link_id; | 
 | 			return true; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | /* | 
 |  * requires that rx->skb is a frame with ethernet header | 
 |  */ | 
 | static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc) | 
 | { | 
 | 	static const u8 pae_group_addr[ETH_ALEN] __aligned(2) | 
 | 		= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; | 
 | 	struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
 |  | 
 | 	/* | 
 | 	 * Allow EAPOL frames to us/the PAE group address regardless of | 
 | 	 * whether the frame was encrypted or not, and always disallow | 
 | 	 * all other destination addresses for them. | 
 | 	 */ | 
 | 	if (unlikely(ehdr->h_proto == rx->sdata->control_port_protocol)) | 
 | 		return ieee80211_is_our_addr(rx->sdata, ehdr->h_dest, NULL) || | 
 | 		       ether_addr_equal(ehdr->h_dest, pae_group_addr); | 
 |  | 
 | 	if (ieee80211_802_1x_port_control(rx) || | 
 | 	    ieee80211_drop_unencrypted(rx, fc)) | 
 | 		return false; | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb, | 
 | 						 struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct net_device *dev = sdata->dev; | 
 |  | 
 | 	if (unlikely((skb->protocol == sdata->control_port_protocol || | 
 | 		     (skb->protocol == cpu_to_be16(ETH_P_PREAUTH) && | 
 | 		      !sdata->control_port_no_preauth)) && | 
 | 		     sdata->control_port_over_nl80211)) { | 
 | 		struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 		bool noencrypt = !(status->flag & RX_FLAG_DECRYPTED); | 
 |  | 
 | 		cfg80211_rx_control_port(dev, skb, noencrypt, rx->link_id); | 
 | 		dev_kfree_skb(skb); | 
 | 	} else { | 
 | 		struct ethhdr *ehdr = (void *)skb_mac_header(skb); | 
 |  | 
 | 		memset(skb->cb, 0, sizeof(skb->cb)); | 
 |  | 
 | 		/* | 
 | 		 * 802.1X over 802.11 requires that the authenticator address | 
 | 		 * be used for EAPOL frames. However, 802.1X allows the use of | 
 | 		 * the PAE group address instead. If the interface is part of | 
 | 		 * a bridge and we pass the frame with the PAE group address, | 
 | 		 * then the bridge will forward it to the network (even if the | 
 | 		 * client was not associated yet), which isn't supposed to | 
 | 		 * happen. | 
 | 		 * To avoid that, rewrite the destination address to our own | 
 | 		 * address, so that the authenticator (e.g. hostapd) will see | 
 | 		 * the frame, but bridge won't forward it anywhere else. Note | 
 | 		 * that due to earlier filtering, the only other address can | 
 | 		 * be the PAE group address, unless the hardware allowed them | 
 | 		 * through in 802.3 offloaded mode. | 
 | 		 */ | 
 | 		if (unlikely(skb->protocol == sdata->control_port_protocol && | 
 | 			     !ether_addr_equal(ehdr->h_dest, sdata->vif.addr))) | 
 | 			ether_addr_copy(ehdr->h_dest, sdata->vif.addr); | 
 |  | 
 | 		/* deliver to local stack */ | 
 | 		if (rx->list) | 
 | 			list_add_tail(&skb->list, rx->list); | 
 | 		else | 
 | 			netif_receive_skb(skb); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * requires that rx->skb is a frame with ethernet header | 
 |  */ | 
 | static void | 
 | ieee80211_deliver_skb(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct net_device *dev = sdata->dev; | 
 | 	struct sk_buff *skb, *xmit_skb; | 
 | 	struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
 | 	struct sta_info *dsta; | 
 |  | 
 | 	skb = rx->skb; | 
 | 	xmit_skb = NULL; | 
 |  | 
 | 	dev_sw_netstats_rx_add(dev, skb->len); | 
 |  | 
 | 	if (rx->sta) { | 
 | 		/* The seqno index has the same property as needed | 
 | 		 * for the rx_msdu field, i.e. it is IEEE80211_NUM_TIDS | 
 | 		 * for non-QoS-data frames. Here we know it's a data | 
 | 		 * frame, so count MSDUs. | 
 | 		 */ | 
 | 		u64_stats_update_begin(&rx->link_sta->rx_stats.syncp); | 
 | 		rx->link_sta->rx_stats.msdu[rx->seqno_idx]++; | 
 | 		u64_stats_update_end(&rx->link_sta->rx_stats.syncp); | 
 | 	} | 
 |  | 
 | 	if ((sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && | 
 | 	    !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) && | 
 | 	    ehdr->h_proto != rx->sdata->control_port_protocol && | 
 | 	    (sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) { | 
 | 		if (is_multicast_ether_addr(ehdr->h_dest) && | 
 | 		    ieee80211_vif_get_num_mcast_if(sdata) != 0) { | 
 | 			/* | 
 | 			 * send multicast frames both to higher layers in | 
 | 			 * local net stack and back to the wireless medium | 
 | 			 */ | 
 | 			xmit_skb = skb_copy(skb, GFP_ATOMIC); | 
 | 			if (!xmit_skb) | 
 | 				net_info_ratelimited("%s: failed to clone multicast frame\n", | 
 | 						    dev->name); | 
 | 		} else if (!is_multicast_ether_addr(ehdr->h_dest) && | 
 | 			   !ether_addr_equal(ehdr->h_dest, ehdr->h_source)) { | 
 | 			dsta = sta_info_get(sdata, ehdr->h_dest); | 
 | 			if (dsta) { | 
 | 				/* | 
 | 				 * The destination station is associated to | 
 | 				 * this AP (in this VLAN), so send the frame | 
 | 				 * directly to it and do not pass it to local | 
 | 				 * net stack. | 
 | 				 */ | 
 | 				xmit_skb = skb; | 
 | 				skb = NULL; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS | 
 | 	if (skb) { | 
 | 		/* 'align' will only take the values 0 or 2 here since all | 
 | 		 * frames are required to be aligned to 2-byte boundaries | 
 | 		 * when being passed to mac80211; the code here works just | 
 | 		 * as well if that isn't true, but mac80211 assumes it can | 
 | 		 * access fields as 2-byte aligned (e.g. for ether_addr_equal) | 
 | 		 */ | 
 | 		int align; | 
 |  | 
 | 		align = (unsigned long)(skb->data + sizeof(struct ethhdr)) & 3; | 
 | 		if (align) { | 
 | 			if (WARN_ON(skb_headroom(skb) < 3)) { | 
 | 				dev_kfree_skb(skb); | 
 | 				skb = NULL; | 
 | 			} else { | 
 | 				u8 *data = skb->data; | 
 | 				size_t len = skb_headlen(skb); | 
 | 				skb->data -= align; | 
 | 				memmove(skb->data, data, len); | 
 | 				skb_set_tail_pointer(skb, len); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (skb) { | 
 | 		skb->protocol = eth_type_trans(skb, dev); | 
 | 		ieee80211_deliver_skb_to_local_stack(skb, rx); | 
 | 	} | 
 |  | 
 | 	if (xmit_skb) { | 
 | 		/* | 
 | 		 * Send to wireless media and increase priority by 256 to | 
 | 		 * keep the received priority instead of reclassifying | 
 | 		 * the frame (see cfg80211_classify8021d). | 
 | 		 */ | 
 | 		xmit_skb->priority += 256; | 
 | 		xmit_skb->protocol = htons(ETH_P_802_3); | 
 | 		skb_reset_network_header(xmit_skb); | 
 | 		skb_reset_mac_header(xmit_skb); | 
 | 		dev_queue_xmit(xmit_skb); | 
 | 	} | 
 | } | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | static bool | 
 | ieee80211_rx_mesh_fast_forward(struct ieee80211_sub_if_data *sdata, | 
 | 			       struct sk_buff *skb, int hdrlen) | 
 | { | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_mesh_fast_tx_key key = { | 
 | 		.type = MESH_FAST_TX_TYPE_FORWARDED | 
 | 	}; | 
 | 	struct ieee80211_mesh_fast_tx *entry; | 
 | 	struct ieee80211s_hdr *mesh_hdr; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct sta_info *sta; | 
 | 	struct ethhdr eth; | 
 | 	u8 tid; | 
 |  | 
 | 	mesh_hdr = (struct ieee80211s_hdr *)(skb->data + sizeof(eth)); | 
 | 	if ((mesh_hdr->flags & MESH_FLAGS_AE) == MESH_FLAGS_AE_A5_A6) | 
 | 		ether_addr_copy(key.addr, mesh_hdr->eaddr1); | 
 | 	else if (!(mesh_hdr->flags & MESH_FLAGS_AE)) | 
 | 		ether_addr_copy(key.addr, skb->data); | 
 | 	else | 
 | 		return false; | 
 |  | 
 | 	entry = mesh_fast_tx_get(sdata, &key); | 
 | 	if (!entry) | 
 | 		return false; | 
 |  | 
 | 	sta = rcu_dereference(entry->mpath->next_hop); | 
 | 	if (!sta) | 
 | 		return false; | 
 |  | 
 | 	if (skb_linearize(skb)) | 
 | 		return false; | 
 |  | 
 | 	tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
 | 	tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | 
 | 	if (tid_tx) { | 
 | 		if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) | 
 | 			return false; | 
 |  | 
 | 		if (tid_tx->timeout) | 
 | 			tid_tx->last_tx = jiffies; | 
 | 	} | 
 |  | 
 | 	ieee80211_aggr_check(sdata, sta, skb); | 
 |  | 
 | 	if (ieee80211_get_8023_tunnel_proto(skb->data + hdrlen, | 
 | 					    &skb->protocol)) | 
 | 		hdrlen += ETH_ALEN; | 
 | 	else | 
 | 		skb->protocol = htons(skb->len - hdrlen); | 
 | 	skb_set_network_header(skb, hdrlen + 2); | 
 |  | 
 | 	skb->dev = sdata->dev; | 
 | 	memcpy(ð, skb->data, ETH_HLEN - 2); | 
 | 	skb_pull(skb, 2); | 
 | 	__ieee80211_xmit_fast(sdata, sta, &entry->fast_tx, skb, tid_tx, | 
 | 			      eth.h_dest, eth.h_source); | 
 | 	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast); | 
 | 	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames); | 
 |  | 
 | 	return true; | 
 | } | 
 | #endif | 
 |  | 
 | static ieee80211_rx_result | 
 | ieee80211_rx_mesh_data(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, | 
 | 		       struct sk_buff *skb) | 
 | { | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	uint16_t fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA; | 
 | 	struct ieee80211_hdr hdr = { | 
 | 		.frame_control = cpu_to_le16(fc) | 
 | 	}; | 
 | 	struct ieee80211_hdr *fwd_hdr; | 
 | 	struct ieee80211s_hdr *mesh_hdr; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct sk_buff *fwd_skb; | 
 | 	struct ethhdr *eth; | 
 | 	bool multicast; | 
 | 	int tailroom = 0; | 
 | 	int hdrlen, mesh_hdrlen; | 
 | 	u8 *qos; | 
 |  | 
 | 	if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!pskb_may_pull(skb, sizeof(*eth) + 6)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	mesh_hdr = (struct ieee80211s_hdr *)(skb->data + sizeof(*eth)); | 
 | 	mesh_hdrlen = ieee80211_get_mesh_hdrlen(mesh_hdr); | 
 |  | 
 | 	if (!pskb_may_pull(skb, sizeof(*eth) + mesh_hdrlen)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	eth = (struct ethhdr *)skb->data; | 
 | 	multicast = is_multicast_ether_addr(eth->h_dest); | 
 |  | 
 | 	mesh_hdr = (struct ieee80211s_hdr *)(eth + 1); | 
 | 	if (!mesh_hdr->ttl) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* frame is in RMC, don't forward */ | 
 | 	if (is_multicast_ether_addr(eth->h_dest) && | 
 | 	    mesh_rmc_check(sdata, eth->h_source, mesh_hdr)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* forward packet */ | 
 | 	if (sdata->crypto_tx_tailroom_needed_cnt) | 
 | 		tailroom = IEEE80211_ENCRYPT_TAILROOM; | 
 |  | 
 | 	if (mesh_hdr->flags & MESH_FLAGS_AE) { | 
 | 		struct mesh_path *mppath; | 
 | 		char *proxied_addr; | 
 | 		bool update = false; | 
 |  | 
 | 		if (multicast) | 
 | 			proxied_addr = mesh_hdr->eaddr1; | 
 | 		else if ((mesh_hdr->flags & MESH_FLAGS_AE) == MESH_FLAGS_AE_A5_A6) | 
 | 			/* has_a4 already checked in ieee80211_rx_mesh_check */ | 
 | 			proxied_addr = mesh_hdr->eaddr2; | 
 | 		else | 
 | 			return RX_DROP; | 
 |  | 
 | 		rcu_read_lock(); | 
 | 		mppath = mpp_path_lookup(sdata, proxied_addr); | 
 | 		if (!mppath) { | 
 | 			mpp_path_add(sdata, proxied_addr, eth->h_source); | 
 | 		} else { | 
 | 			spin_lock_bh(&mppath->state_lock); | 
 | 			if (!ether_addr_equal(mppath->mpp, eth->h_source)) { | 
 | 				memcpy(mppath->mpp, eth->h_source, ETH_ALEN); | 
 | 				update = true; | 
 | 			} | 
 | 			mppath->exp_time = jiffies; | 
 | 			spin_unlock_bh(&mppath->state_lock); | 
 | 		} | 
 |  | 
 | 		/* flush fast xmit cache if the address path changed */ | 
 | 		if (update) | 
 | 			mesh_fast_tx_flush_addr(sdata, proxied_addr); | 
 |  | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 |  | 
 | 	/* Frame has reached destination.  Don't forward */ | 
 | 	if (ether_addr_equal(sdata->vif.addr, eth->h_dest)) | 
 | 		goto rx_accept; | 
 |  | 
 | 	if (!--mesh_hdr->ttl) { | 
 | 		if (multicast) | 
 | 			goto rx_accept; | 
 |  | 
 | 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl); | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	if (!ifmsh->mshcfg.dot11MeshForwarding) { | 
 | 		if (is_multicast_ether_addr(eth->h_dest)) | 
 | 			goto rx_accept; | 
 |  | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	skb_set_queue_mapping(skb, ieee802_1d_to_ac[skb->priority]); | 
 |  | 
 | 	if (!multicast && | 
 | 	    ieee80211_rx_mesh_fast_forward(sdata, skb, mesh_hdrlen)) | 
 | 		return RX_QUEUED; | 
 |  | 
 | 	ieee80211_fill_mesh_addresses(&hdr, &hdr.frame_control, | 
 | 				      eth->h_dest, eth->h_source); | 
 | 	hdrlen = ieee80211_hdrlen(hdr.frame_control); | 
 | 	if (multicast) { | 
 | 		int extra_head = sizeof(struct ieee80211_hdr) - sizeof(*eth); | 
 |  | 
 | 		fwd_skb = skb_copy_expand(skb, local->tx_headroom + extra_head + | 
 | 					       IEEE80211_ENCRYPT_HEADROOM, | 
 | 					  tailroom, GFP_ATOMIC); | 
 | 		if (!fwd_skb) | 
 | 			goto rx_accept; | 
 | 	} else { | 
 | 		fwd_skb = skb; | 
 | 		skb = NULL; | 
 |  | 
 | 		if (skb_cow_head(fwd_skb, hdrlen - sizeof(struct ethhdr))) | 
 | 			return RX_DROP_U_OOM; | 
 |  | 
 | 		if (skb_linearize(fwd_skb)) | 
 | 			return RX_DROP_U_OOM; | 
 | 	} | 
 |  | 
 | 	fwd_hdr = skb_push(fwd_skb, hdrlen - sizeof(struct ethhdr)); | 
 | 	memcpy(fwd_hdr, &hdr, hdrlen - 2); | 
 | 	qos = ieee80211_get_qos_ctl(fwd_hdr); | 
 | 	qos[0] = qos[1] = 0; | 
 |  | 
 | 	skb_reset_mac_header(fwd_skb); | 
 | 	hdrlen += mesh_hdrlen; | 
 | 	if (ieee80211_get_8023_tunnel_proto(fwd_skb->data + hdrlen, | 
 | 					    &fwd_skb->protocol)) | 
 | 		hdrlen += ETH_ALEN; | 
 | 	else | 
 | 		fwd_skb->protocol = htons(fwd_skb->len - hdrlen); | 
 | 	skb_set_network_header(fwd_skb, hdrlen + 2); | 
 |  | 
 | 	info = IEEE80211_SKB_CB(fwd_skb); | 
 | 	memset(info, 0, sizeof(*info)); | 
 | 	info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
 | 	info->control.vif = &sdata->vif; | 
 | 	info->control.jiffies = jiffies; | 
 | 	fwd_skb->dev = sdata->dev; | 
 | 	if (multicast) { | 
 | 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast); | 
 | 		memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN); | 
 | 		/* update power mode indication when forwarding */ | 
 | 		ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr); | 
 | 	} else if (!mesh_nexthop_lookup(sdata, fwd_skb)) { | 
 | 		/* mesh power mode flags updated in mesh_nexthop_lookup */ | 
 | 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast); | 
 | 	} else { | 
 | 		/* unable to resolve next hop */ | 
 | 		if (sta) | 
 | 			mesh_path_error_tx(sdata, ifmsh->mshcfg.element_ttl, | 
 | 					   hdr.addr3, 0, | 
 | 					   WLAN_REASON_MESH_PATH_NOFORWARD, | 
 | 					   sta->sta.addr); | 
 | 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_no_route); | 
 | 		kfree_skb(fwd_skb); | 
 | 		goto rx_accept; | 
 | 	} | 
 |  | 
 | 	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames); | 
 | 	ieee80211_set_qos_hdr(sdata, fwd_skb); | 
 | 	ieee80211_add_pending_skb(local, fwd_skb); | 
 |  | 
 | rx_accept: | 
 | 	if (!skb) | 
 | 		return RX_QUEUED; | 
 |  | 
 | 	ieee80211_strip_8023_mesh_hdr(skb); | 
 | #endif | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | __ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx, u8 data_offset) | 
 | { | 
 | 	struct net_device *dev = rx->sdata->dev; | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	__le16 fc = hdr->frame_control; | 
 | 	struct sk_buff_head frame_list; | 
 | 	struct ethhdr ethhdr; | 
 | 	const u8 *check_da = ethhdr.h_dest, *check_sa = ethhdr.h_source; | 
 |  | 
 | 	if (unlikely(ieee80211_has_a4(hdr->frame_control))) { | 
 | 		check_da = NULL; | 
 | 		check_sa = NULL; | 
 | 	} else switch (rx->sdata->vif.type) { | 
 | 		case NL80211_IFTYPE_AP: | 
 | 		case NL80211_IFTYPE_AP_VLAN: | 
 | 			check_da = NULL; | 
 | 			break; | 
 | 		case NL80211_IFTYPE_STATION: | 
 | 			if (!test_sta_flag(rx->sta, WLAN_STA_TDLS_PEER)) | 
 | 				check_sa = NULL; | 
 | 			break; | 
 | 		case NL80211_IFTYPE_MESH_POINT: | 
 | 			check_sa = NULL; | 
 | 			check_da = NULL; | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	skb->dev = dev; | 
 | 	__skb_queue_head_init(&frame_list); | 
 |  | 
 | 	if (ieee80211_data_to_8023_exthdr(skb, ðhdr, | 
 | 					  rx->sdata->vif.addr, | 
 | 					  rx->sdata->vif.type, | 
 | 					  data_offset, true)) | 
 | 		return RX_DROP_U_BAD_AMSDU; | 
 |  | 
 | 	if (rx->sta->amsdu_mesh_control < 0) { | 
 | 		s8 valid = -1; | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i <= 2; i++) { | 
 | 			if (!ieee80211_is_valid_amsdu(skb, i)) | 
 | 				continue; | 
 |  | 
 | 			if (valid >= 0) { | 
 | 				/* ambiguous */ | 
 | 				valid = -1; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			valid = i; | 
 | 		} | 
 |  | 
 | 		rx->sta->amsdu_mesh_control = valid; | 
 | 	} | 
 |  | 
 | 	ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr, | 
 | 				 rx->sdata->vif.type, | 
 | 				 rx->local->hw.extra_tx_headroom, | 
 | 				 check_da, check_sa, | 
 | 				 rx->sta->amsdu_mesh_control); | 
 |  | 
 | 	while (!skb_queue_empty(&frame_list)) { | 
 | 		rx->skb = __skb_dequeue(&frame_list); | 
 |  | 
 | 		switch (ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb)) { | 
 | 		case RX_QUEUED: | 
 | 			break; | 
 | 		case RX_CONTINUE: | 
 | 			if (ieee80211_frame_allowed(rx, fc)) { | 
 | 				ieee80211_deliver_skb(rx); | 
 | 				break; | 
 | 			} | 
 | 			fallthrough; | 
 | 		default: | 
 | 			dev_kfree_skb(rx->skb); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	__le16 fc = hdr->frame_control; | 
 |  | 
 | 	if (!(status->rx_flags & IEEE80211_RX_AMSDU)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data(fc))) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data_present(fc))) | 
 | 		return RX_DROP; | 
 |  | 
 | 	if (unlikely(ieee80211_has_a4(hdr->frame_control))) { | 
 | 		switch (rx->sdata->vif.type) { | 
 | 		case NL80211_IFTYPE_AP_VLAN: | 
 | 			if (!rx->sdata->u.vlan.sta) | 
 | 				return RX_DROP_U_BAD_4ADDR; | 
 | 			break; | 
 | 		case NL80211_IFTYPE_STATION: | 
 | 			if (!rx->sdata->u.mgd.use_4addr) | 
 | 				return RX_DROP_U_BAD_4ADDR; | 
 | 			break; | 
 | 		case NL80211_IFTYPE_MESH_POINT: | 
 | 			break; | 
 | 		default: | 
 | 			return RX_DROP_U_BAD_4ADDR; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1) || !rx->sta) | 
 | 		return RX_DROP_U_BAD_AMSDU; | 
 |  | 
 | 	if (rx->key) { | 
 | 		/* | 
 | 		 * We should not receive A-MSDUs on pre-HT connections, | 
 | 		 * and HT connections cannot use old ciphers. Thus drop | 
 | 		 * them, as in those cases we couldn't even have SPP | 
 | 		 * A-MSDUs or such. | 
 | 		 */ | 
 | 		switch (rx->key->conf.cipher) { | 
 | 		case WLAN_CIPHER_SUITE_WEP40: | 
 | 		case WLAN_CIPHER_SUITE_WEP104: | 
 | 		case WLAN_CIPHER_SUITE_TKIP: | 
 | 			return RX_DROP_U_BAD_AMSDU_CIPHER; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return __ieee80211_rx_h_amsdu(rx, 0); | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_data(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_local *local = rx->local; | 
 | 	struct net_device *dev = sdata->dev; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	__le16 fc = hdr->frame_control; | 
 | 	ieee80211_rx_result res; | 
 | 	bool port_control; | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data(hdr->frame_control))) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* Send unexpected-4addr-frame event to hostapd */ | 
 | 	if (ieee80211_has_a4(hdr->frame_control) && | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP) { | 
 | 		if (rx->sta && | 
 | 		    !test_and_set_sta_flag(rx->sta, WLAN_STA_4ADDR_EVENT)) | 
 | 			cfg80211_rx_unexpected_4addr_frame( | 
 | 				rx->sdata->dev, rx->sta->sta.addr, rx->link_id, | 
 | 				GFP_ATOMIC); | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	res = __ieee80211_data_to_8023(rx, &port_control); | 
 | 	if (unlikely(res != RX_CONTINUE)) | 
 | 		return res; | 
 |  | 
 | 	res = ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb); | 
 | 	if (res != RX_CONTINUE) | 
 | 		return res; | 
 |  | 
 | 	if (!ieee80211_frame_allowed(rx, fc)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* directly handle TDLS channel switch requests/responses */ | 
 | 	if (unlikely(((struct ethhdr *)rx->skb->data)->h_proto == | 
 | 						cpu_to_be16(ETH_P_TDLS))) { | 
 | 		struct ieee80211_tdls_data *tf = (void *)rx->skb->data; | 
 |  | 
 | 		if (pskb_may_pull(rx->skb, | 
 | 				  offsetof(struct ieee80211_tdls_data, u)) && | 
 | 		    tf->payload_type == WLAN_TDLS_SNAP_RFTYPE && | 
 | 		    tf->category == WLAN_CATEGORY_TDLS && | 
 | 		    (tf->action_code == WLAN_TDLS_CHANNEL_SWITCH_REQUEST || | 
 | 		     tf->action_code == WLAN_TDLS_CHANNEL_SWITCH_RESPONSE)) { | 
 | 			rx->skb->protocol = cpu_to_be16(ETH_P_TDLS); | 
 | 			__ieee80211_queue_skb_to_iface(sdata, rx->link_id, | 
 | 						       rx->sta, rx->skb); | 
 | 			return RX_QUEUED; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 	    unlikely(port_control) && sdata->bss) { | 
 | 		sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, | 
 | 				     u.ap); | 
 | 		dev = sdata->dev; | 
 | 		rx->sdata = sdata; | 
 | 	} | 
 |  | 
 | 	rx->skb->dev = dev; | 
 |  | 
 | 	if (!ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS) && | 
 | 	    local->ps_sdata && local->hw.conf.dynamic_ps_timeout > 0 && | 
 | 	    !is_multicast_ether_addr( | 
 | 		    ((struct ethhdr *)rx->skb->data)->h_dest) && | 
 | 	    (!local->scanning && | 
 | 	     !test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state))) | 
 | 		mod_timer(&local->dynamic_ps_timer, jiffies + | 
 | 			  msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); | 
 |  | 
 | 	ieee80211_deliver_skb(rx); | 
 |  | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data; | 
 | 	struct tid_ampdu_rx *tid_agg_rx; | 
 | 	u16 start_seq_num; | 
 | 	u16 tid; | 
 |  | 
 | 	if (likely(!ieee80211_is_ctl(bar->frame_control))) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (ieee80211_is_back_req(bar->frame_control)) { | 
 | 		struct { | 
 | 			__le16 control, start_seq_num; | 
 | 		} __packed bar_data; | 
 | 		struct ieee80211_event event = { | 
 | 			.type = BAR_RX_EVENT, | 
 | 		}; | 
 |  | 
 | 		if (!rx->sta) | 
 | 			return RX_DROP; | 
 |  | 
 | 		if (skb_copy_bits(skb, offsetof(struct ieee80211_bar, control), | 
 | 				  &bar_data, sizeof(bar_data))) | 
 | 			return RX_DROP; | 
 |  | 
 | 		tid = le16_to_cpu(bar_data.control) >> 12; | 
 |  | 
 | 		if (!test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) && | 
 | 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg)) | 
 | 			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, | 
 | 					     WLAN_BACK_RECIPIENT, | 
 | 					     WLAN_REASON_QSTA_REQUIRE_SETUP); | 
 |  | 
 | 		tid_agg_rx = rcu_dereference(rx->sta->ampdu_mlme.tid_rx[tid]); | 
 | 		if (!tid_agg_rx) | 
 | 			return RX_DROP; | 
 |  | 
 | 		start_seq_num = le16_to_cpu(bar_data.start_seq_num) >> 4; | 
 | 		event.u.ba.tid = tid; | 
 | 		event.u.ba.ssn = start_seq_num; | 
 | 		event.u.ba.sta = &rx->sta->sta; | 
 |  | 
 | 		/* reset session timer */ | 
 | 		if (tid_agg_rx->timeout) | 
 | 			mod_timer(&tid_agg_rx->session_timer, | 
 | 				  TU_TO_EXP_TIME(tid_agg_rx->timeout)); | 
 |  | 
 | 		spin_lock(&tid_agg_rx->reorder_lock); | 
 | 		/* release stored frames up to start of BAR */ | 
 | 		ieee80211_release_reorder_frames(rx->sdata, tid_agg_rx, | 
 | 						 start_seq_num, frames); | 
 | 		spin_unlock(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 		drv_event_callback(rx->local, rx->sdata, &event); | 
 |  | 
 | 		kfree_skb(skb); | 
 | 		return RX_QUEUED; | 
 | 	} | 
 |  | 
 | 	return RX_DROP; | 
 | } | 
 |  | 
 | static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata, | 
 | 					   struct ieee80211_mgmt *mgmt, | 
 | 					   size_t len) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_mgmt *resp; | 
 |  | 
 | 	if (!ether_addr_equal(mgmt->da, sdata->vif.addr)) { | 
 | 		/* Not to own unicast address */ | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!ether_addr_equal(mgmt->sa, sdata->vif.cfg.ap_addr) || | 
 | 	    !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) { | 
 | 		/* Not from the current AP or not associated yet. */ | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (len < 24 + 1 + sizeof(resp->u.action.u.sa_query)) { | 
 | 		/* Too short SA Query request frame */ | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*resp) + local->hw.extra_tx_headroom); | 
 | 	if (skb == NULL) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	resp = skb_put_zero(skb, 24); | 
 | 	memcpy(resp->da, sdata->vif.cfg.ap_addr, ETH_ALEN); | 
 | 	memcpy(resp->sa, sdata->vif.addr, ETH_ALEN); | 
 | 	memcpy(resp->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); | 
 | 	resp->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 					  IEEE80211_STYPE_ACTION); | 
 | 	skb_put(skb, 1 + sizeof(resp->u.action.u.sa_query)); | 
 | 	resp->u.action.category = WLAN_CATEGORY_SA_QUERY; | 
 | 	resp->u.action.u.sa_query.action = WLAN_ACTION_SA_QUERY_RESPONSE; | 
 | 	memcpy(resp->u.action.u.sa_query.trans_id, | 
 | 	       mgmt->u.action.u.sa_query.trans_id, | 
 | 	       WLAN_SA_QUERY_TR_ID_LEN); | 
 |  | 
 | 	ieee80211_tx_skb(sdata, skb); | 
 | } | 
 |  | 
 | static void | 
 | ieee80211_rx_check_bss_color_collision(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_mgmt *mgmt = (void *)rx->skb->data; | 
 | 	struct ieee80211_bss_conf *bss_conf; | 
 | 	const struct element *ie; | 
 | 	size_t baselen; | 
 |  | 
 | 	if (!wiphy_ext_feature_isset(rx->local->hw.wiphy, | 
 | 				     NL80211_EXT_FEATURE_BSS_COLOR)) | 
 | 		return; | 
 |  | 
 | 	if (ieee80211_hw_check(&rx->local->hw, DETECTS_COLOR_COLLISION)) | 
 | 		return; | 
 |  | 
 | 	bss_conf = rx->link->conf; | 
 | 	if (bss_conf->csa_active || bss_conf->color_change_active || | 
 | 	    !bss_conf->he_bss_color.enabled) | 
 | 		return; | 
 |  | 
 | 	baselen = mgmt->u.beacon.variable - rx->skb->data; | 
 | 	if (baselen > rx->skb->len) | 
 | 		return; | 
 |  | 
 | 	ie = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_OPERATION, | 
 | 				    mgmt->u.beacon.variable, | 
 | 				    rx->skb->len - baselen); | 
 | 	if (ie && ie->datalen >= sizeof(struct ieee80211_he_operation) && | 
 | 	    ie->datalen >= ieee80211_he_oper_size(ie->data + 1)) { | 
 | 		const struct ieee80211_he_operation *he_oper; | 
 | 		u8 color; | 
 |  | 
 | 		he_oper = (void *)(ie->data + 1); | 
 | 		if (le32_get_bits(he_oper->he_oper_params, | 
 | 				  IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED)) | 
 | 			return; | 
 |  | 
 | 		color = le32_get_bits(he_oper->he_oper_params, | 
 | 				      IEEE80211_HE_OPERATION_BSS_COLOR_MASK); | 
 | 		if (color == bss_conf->he_bss_color.color) | 
 | 			ieee80211_obss_color_collision_notify(&rx->sdata->vif, | 
 | 							      BIT_ULL(color), | 
 | 							      bss_conf->link_id); | 
 | 	} | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 |  | 
 | 	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * From here on, look only at management frames. | 
 | 	 * Data and control frames are already handled, | 
 | 	 * and unknown (reserved) frames are useless. | 
 | 	 */ | 
 | 	if (rx->skb->len < 24) | 
 | 		return RX_DROP; | 
 |  | 
 | 	if (!ieee80211_is_mgmt(mgmt->frame_control)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* drop too small action frames */ | 
 | 	if (ieee80211_is_action(mgmt->frame_control) && | 
 | 	    rx->skb->len < IEEE80211_MIN_ACTION_SIZE) | 
 | 		return RX_DROP_U_RUNT_ACTION; | 
 |  | 
 | 	if (rx->sdata->vif.type == NL80211_IFTYPE_AP && | 
 | 	    ieee80211_is_beacon(mgmt->frame_control) && | 
 | 	    !(rx->flags & IEEE80211_RX_BEACON_REPORTED)) { | 
 | 		int sig = 0; | 
 |  | 
 | 		/* sw bss color collision detection */ | 
 | 		ieee80211_rx_check_bss_color_collision(rx); | 
 |  | 
 | 		if (ieee80211_hw_check(&rx->local->hw, SIGNAL_DBM) && | 
 | 		    !(status->flag & RX_FLAG_NO_SIGNAL_VAL)) | 
 | 			sig = status->signal; | 
 |  | 
 | 		cfg80211_report_obss_beacon_khz(rx->local->hw.wiphy, | 
 | 						rx->skb->data, rx->skb->len, | 
 | 						ieee80211_rx_status_to_khz(status), | 
 | 						sig); | 
 | 		rx->flags |= IEEE80211_RX_BEACON_REPORTED; | 
 | 	} | 
 |  | 
 | 	return ieee80211_drop_unencrypted_mgmt(rx); | 
 | } | 
 |  | 
 | static bool | 
 | ieee80211_process_rx_twt_action(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)rx->skb->data; | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 |  | 
 | 	/* TWT actions are only supported in AP for the moment */ | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_AP) | 
 | 		return false; | 
 |  | 
 | 	if (!rx->local->ops->add_twt_setup) | 
 | 		return false; | 
 |  | 
 | 	if (!sdata->vif.bss_conf.twt_responder) | 
 | 		return false; | 
 |  | 
 | 	if (!rx->sta) | 
 | 		return false; | 
 |  | 
 | 	switch (mgmt->u.action.u.s1g.action_code) { | 
 | 	case WLAN_S1G_TWT_SETUP: { | 
 | 		struct ieee80211_twt_setup *twt; | 
 |  | 
 | 		if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE + | 
 | 				   1 + /* action code */ | 
 | 				   sizeof(struct ieee80211_twt_setup) + | 
 | 				   2 /* TWT req_type agrt */) | 
 | 			break; | 
 |  | 
 | 		twt = (void *)mgmt->u.action.u.s1g.variable; | 
 | 		if (twt->element_id != WLAN_EID_S1G_TWT) | 
 | 			break; | 
 |  | 
 | 		if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE + | 
 | 				   4 + /* action code + token + tlv */ | 
 | 				   twt->length) | 
 | 			break; | 
 |  | 
 | 		return true; /* queue the frame */ | 
 | 	} | 
 | 	case WLAN_S1G_TWT_TEARDOWN: | 
 | 		if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE + 2) | 
 | 			break; | 
 |  | 
 | 		return true; /* queue the frame */ | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_action(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_local *local = rx->local; | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 | 	int len = rx->skb->len; | 
 |  | 
 | 	if (!ieee80211_is_action(mgmt->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (!rx->sta && mgmt->u.action.category != WLAN_CATEGORY_PUBLIC && | 
 | 	    mgmt->u.action.category != WLAN_CATEGORY_SELF_PROTECTED && | 
 | 	    mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT) | 
 | 		return RX_DROP_U_ACTION_UNKNOWN_SRC; | 
 |  | 
 | 	switch (mgmt->u.action.category) { | 
 | 	case WLAN_CATEGORY_HT: | 
 | 		/* reject HT action frames from stations not supporting HT */ | 
 | 		if (!rx->link_sta->pub->ht_cap.ht_supported) | 
 | 			goto invalid; | 
 |  | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_MESH_POINT && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
 | 			break; | 
 |  | 
 | 		/* verify action & smps_control/chanwidth are present */ | 
 | 		if (len < IEEE80211_MIN_ACTION_SIZE + 2) | 
 | 			goto invalid; | 
 |  | 
 | 		switch (mgmt->u.action.u.ht_smps.action) { | 
 | 		case WLAN_HT_ACTION_SMPS: { | 
 | 			struct ieee80211_supported_band *sband; | 
 | 			enum ieee80211_smps_mode smps_mode; | 
 | 			struct sta_opmode_info sta_opmode = {}; | 
 |  | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 			    sdata->vif.type != NL80211_IFTYPE_AP_VLAN) | 
 | 				goto handled; | 
 |  | 
 | 			/* convert to HT capability */ | 
 | 			switch (mgmt->u.action.u.ht_smps.smps_control) { | 
 | 			case WLAN_HT_SMPS_CONTROL_DISABLED: | 
 | 				smps_mode = IEEE80211_SMPS_OFF; | 
 | 				break; | 
 | 			case WLAN_HT_SMPS_CONTROL_STATIC: | 
 | 				smps_mode = IEEE80211_SMPS_STATIC; | 
 | 				break; | 
 | 			case WLAN_HT_SMPS_CONTROL_DYNAMIC: | 
 | 				smps_mode = IEEE80211_SMPS_DYNAMIC; | 
 | 				break; | 
 | 			default: | 
 | 				goto invalid; | 
 | 			} | 
 |  | 
 | 			/* if no change do nothing */ | 
 | 			if (rx->link_sta->pub->smps_mode == smps_mode) | 
 | 				goto handled; | 
 | 			rx->link_sta->pub->smps_mode = smps_mode; | 
 | 			sta_opmode.smps_mode = | 
 | 				ieee80211_smps_mode_to_smps_mode(smps_mode); | 
 | 			sta_opmode.changed = STA_OPMODE_SMPS_MODE_CHANGED; | 
 |  | 
 | 			sband = rx->local->hw.wiphy->bands[status->band]; | 
 |  | 
 | 			rate_control_rate_update(local, sband, rx->link_sta, | 
 | 						 IEEE80211_RC_SMPS_CHANGED); | 
 | 			cfg80211_sta_opmode_change_notify(sdata->dev, | 
 | 							  rx->sta->addr, | 
 | 							  &sta_opmode, | 
 | 							  GFP_ATOMIC); | 
 | 			goto handled; | 
 | 		} | 
 | 		case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { | 
 | 			u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; | 
 |  | 
 | 			if (chanwidth != IEEE80211_HT_CHANWIDTH_20MHZ && | 
 | 			    chanwidth != IEEE80211_HT_CHANWIDTH_ANY) | 
 | 				goto invalid; | 
 |  | 
 | 			/* If it doesn't support 40 MHz it can't change ... */ | 
 | 			if (!(rx->link_sta->pub->ht_cap.cap & | 
 | 				IEEE80211_HT_CAP_SUP_WIDTH_20_40)) | 
 | 				goto handled; | 
 |  | 
 | 			goto queue; | 
 | 		} | 
 | 		default: | 
 | 			goto invalid; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	case WLAN_CATEGORY_PUBLIC: | 
 | 	case WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION: | 
 | 		if (len < IEEE80211_MIN_ACTION_SIZE + 1) | 
 | 			goto invalid; | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 			break; | 
 | 		if (!rx->sta) | 
 | 			break; | 
 | 		if (!ether_addr_equal(mgmt->bssid, sdata->deflink.u.mgd.bssid)) | 
 | 			break; | 
 | 		if (mgmt->u.action.u.ext_chan_switch.action_code != | 
 | 				WLAN_PUB_ACTION_EXT_CHANSW_ANN) | 
 | 			break; | 
 | 		if (len < offsetof(struct ieee80211_mgmt, | 
 | 				   u.action.u.ext_chan_switch.variable)) | 
 | 			goto invalid; | 
 | 		goto queue; | 
 | 	case WLAN_CATEGORY_VHT: | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_MESH_POINT && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
 | 			break; | 
 |  | 
 | 		/* verify action code is present */ | 
 | 		if (len < IEEE80211_MIN_ACTION_SIZE + 1) | 
 | 			goto invalid; | 
 |  | 
 | 		switch (mgmt->u.action.u.vht_opmode_notif.action_code) { | 
 | 		case WLAN_VHT_ACTION_OPMODE_NOTIF: { | 
 | 			/* verify opmode is present */ | 
 | 			if (len < IEEE80211_MIN_ACTION_SIZE + 2) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		} | 
 | 		case WLAN_VHT_ACTION_GROUPID_MGMT: { | 
 | 			if (len < IEEE80211_MIN_ACTION_SIZE + 25) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		} | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case WLAN_CATEGORY_BACK: | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_MESH_POINT && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
 | 			break; | 
 |  | 
 | 		/* verify action_code is present */ | 
 | 		if (len < IEEE80211_MIN_ACTION_SIZE + 1) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.addba_req.action_code) { | 
 | 		case WLAN_ACTION_ADDBA_REQ: | 
 | 			if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 				   sizeof(mgmt->u.action.u.addba_req))) | 
 | 				goto invalid; | 
 | 			break; | 
 | 		case WLAN_ACTION_ADDBA_RESP: | 
 | 			if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 				   sizeof(mgmt->u.action.u.addba_resp))) | 
 | 				goto invalid; | 
 | 			break; | 
 | 		case WLAN_ACTION_DELBA: | 
 | 			if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 				   sizeof(mgmt->u.action.u.delba))) | 
 | 				goto invalid; | 
 | 			break; | 
 | 		default: | 
 | 			goto invalid; | 
 | 		} | 
 |  | 
 | 		goto queue; | 
 | 	case WLAN_CATEGORY_SPECTRUM_MGMT: | 
 | 		/* verify action_code is present */ | 
 | 		if (len < IEEE80211_MIN_ACTION_SIZE + 1) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.measurement.action_code) { | 
 | 		case WLAN_ACTION_SPCT_MSR_REQ: | 
 | 			if (status->band != NL80211_BAND_5GHZ) | 
 | 				break; | 
 |  | 
 | 			if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 				   sizeof(mgmt->u.action.u.measurement))) | 
 | 				break; | 
 |  | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			ieee80211_process_measurement_req(sdata, mgmt, len); | 
 | 			goto handled; | 
 | 		case WLAN_ACTION_SPCT_CHL_SWITCH: { | 
 | 			u8 *bssid; | 
 | 			if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 				   sizeof(mgmt->u.action.u.chan_switch))) | 
 | 				break; | 
 |  | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 			    sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
 | 			    sdata->vif.type != NL80211_IFTYPE_MESH_POINT) | 
 | 				break; | 
 |  | 
 | 			if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
 | 				bssid = sdata->deflink.u.mgd.bssid; | 
 | 			else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
 | 				bssid = sdata->u.ibss.bssid; | 
 | 			else if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | 
 | 				bssid = mgmt->sa; | 
 | 			else | 
 | 				break; | 
 |  | 
 | 			if (!ether_addr_equal(mgmt->bssid, bssid)) | 
 | 				break; | 
 |  | 
 | 			goto queue; | 
 | 			} | 
 | 		} | 
 | 		break; | 
 | 	case WLAN_CATEGORY_SELF_PROTECTED: | 
 | 		if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 			   sizeof(mgmt->u.action.u.self_prot.action_code))) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.self_prot.action_code) { | 
 | 		case WLAN_SP_MESH_PEERING_OPEN: | 
 | 		case WLAN_SP_MESH_PEERING_CLOSE: | 
 | 		case WLAN_SP_MESH_PEERING_CONFIRM: | 
 | 			if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 				goto invalid; | 
 | 			if (sdata->u.mesh.user_mpm) | 
 | 				/* userspace handles this frame */ | 
 | 				break; | 
 | 			goto queue; | 
 | 		case WLAN_SP_MGK_INFORM: | 
 | 		case WLAN_SP_MGK_ACK: | 
 | 			if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 				goto invalid; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case WLAN_CATEGORY_MESH_ACTION: | 
 | 		if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 			   sizeof(mgmt->u.action.u.mesh_action.action_code))) | 
 | 			break; | 
 |  | 
 | 		if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			break; | 
 | 		if (mesh_action_is_path_sel(mgmt) && | 
 | 		    !mesh_path_sel_is_hwmp(sdata)) | 
 | 			break; | 
 | 		goto queue; | 
 | 	case WLAN_CATEGORY_S1G: | 
 | 		if (len < offsetofend(typeof(*mgmt), | 
 | 				      u.action.u.s1g.action_code)) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.s1g.action_code) { | 
 | 		case WLAN_S1G_TWT_SETUP: | 
 | 		case WLAN_S1G_TWT_TEARDOWN: | 
 | 			if (ieee80211_process_rx_twt_action(rx)) | 
 | 				goto queue; | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case WLAN_CATEGORY_PROTECTED_EHT: | 
 | 		if (len < offsetofend(typeof(*mgmt), | 
 | 				      u.action.u.ttlm_req.action_code)) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.ttlm_req.action_code) { | 
 | 		case WLAN_PROTECTED_EHT_ACTION_TTLM_REQ: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			if (len < offsetofend(typeof(*mgmt), | 
 | 					      u.action.u.ttlm_req)) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		case WLAN_PROTECTED_EHT_ACTION_TTLM_RES: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			if (len < offsetofend(typeof(*mgmt), | 
 | 					      u.action.u.ttlm_res)) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		case WLAN_PROTECTED_EHT_ACTION_TTLM_TEARDOWN: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			if (len < offsetofend(typeof(*mgmt), | 
 | 					      u.action.u.ttlm_tear_down)) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		case WLAN_PROTECTED_EHT_ACTION_LINK_RECONFIG_RESP: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			/* The reconfiguration response action frame must | 
 | 			 * least one 'Status Duple' entry (3 octets) | 
 | 			 */ | 
 | 			if (len < | 
 | 			    offsetofend(typeof(*mgmt), | 
 | 					u.action.u.ml_reconf_resp) + 3) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		case WLAN_PROTECTED_EHT_ACTION_EPCS_ENABLE_RESP: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			if (len < offsetofend(typeof(*mgmt), | 
 | 					      u.action.u.epcs) + | 
 | 			    IEEE80211_EPCS_ENA_RESP_BODY_LEN) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		case WLAN_PROTECTED_EHT_ACTION_EPCS_ENABLE_TEARDOWN: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 |  | 
 | 			if (len < offsetofend(typeof(*mgmt), | 
 | 					      u.action.u.epcs)) | 
 | 				goto invalid; | 
 | 			goto queue; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 |  | 
 |  invalid: | 
 | 	status->rx_flags |= IEEE80211_RX_MALFORMED_ACTION_FRM; | 
 | 	/* will return in the next handlers */ | 
 | 	return RX_CONTINUE; | 
 |  | 
 |  handled: | 
 | 	if (rx->sta) | 
 | 		rx->link_sta->rx_stats.packets++; | 
 | 	dev_kfree_skb(rx->skb); | 
 | 	return RX_QUEUED; | 
 |  | 
 |  queue: | 
 | 	ieee80211_queue_skb_to_iface(sdata, rx->link_id, rx->sta, rx->skb); | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 | 	struct cfg80211_rx_info info = { | 
 | 		.freq = ieee80211_rx_status_to_khz(status), | 
 | 		.buf = rx->skb->data, | 
 | 		.len = rx->skb->len, | 
 | 		.link_id = rx->link_id, | 
 | 		.have_link_id = rx->link_id >= 0, | 
 | 	}; | 
 |  | 
 | 	/* skip known-bad action frames and return them in the next handler */ | 
 | 	if (status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Getting here means the kernel doesn't know how to handle | 
 | 	 * it, but maybe userspace does ... include returned frames | 
 | 	 * so userspace can register for those to know whether ones | 
 | 	 * it transmitted were processed or returned. | 
 | 	 */ | 
 |  | 
 | 	if (ieee80211_hw_check(&rx->local->hw, SIGNAL_DBM) && | 
 | 	    !(status->flag & RX_FLAG_NO_SIGNAL_VAL)) | 
 | 		info.sig_dbm = status->signal; | 
 |  | 
 | 	if (ieee80211_is_timing_measurement(rx->skb) || | 
 | 	    ieee80211_is_ftm(rx->skb)) { | 
 | 		info.rx_tstamp = ktime_to_ns(skb_hwtstamps(rx->skb)->hwtstamp); | 
 | 		info.ack_tstamp = ktime_to_ns(status->ack_tx_hwtstamp); | 
 | 	} | 
 |  | 
 | 	if (cfg80211_rx_mgmt_ext(&rx->sdata->wdev, &info)) { | 
 | 		if (rx->sta) | 
 | 			rx->link_sta->rx_stats.packets++; | 
 | 		dev_kfree_skb(rx->skb); | 
 | 		return RX_QUEUED; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_action_post_userspace(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
 | 	int len = rx->skb->len; | 
 |  | 
 | 	if (!ieee80211_is_action(mgmt->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	switch (mgmt->u.action.category) { | 
 | 	case WLAN_CATEGORY_SA_QUERY: | 
 | 		if (len < (IEEE80211_MIN_ACTION_SIZE + | 
 | 			   sizeof(mgmt->u.action.u.sa_query))) | 
 | 			break; | 
 |  | 
 | 		switch (mgmt->u.action.u.sa_query.action) { | 
 | 		case WLAN_ACTION_SA_QUERY_REQUEST: | 
 | 			if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 				break; | 
 | 			ieee80211_process_sa_query_req(sdata, mgmt, len); | 
 | 			goto handled; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return RX_CONTINUE; | 
 |  | 
 |  handled: | 
 | 	if (rx->sta) | 
 | 		rx->link_sta->rx_stats.packets++; | 
 | 	dev_kfree_skb(rx->skb); | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_local *local = rx->local; | 
 | 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
 | 	struct sk_buff *nskb; | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 |  | 
 | 	if (!ieee80211_is_action(mgmt->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * For AP mode, hostapd is responsible for handling any action | 
 | 	 * frames that we didn't handle, including returning unknown | 
 | 	 * ones. For all other modes we will return them to the sender, | 
 | 	 * setting the 0x80 bit in the action category, as required by | 
 | 	 * 802.11-2012 9.24.4. | 
 | 	 * Newer versions of hostapd use the management frame registration | 
 | 	 * mechanisms and old cooked monitor interface is no longer supported. | 
 | 	 */ | 
 | 	if (!(status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM) && | 
 | 	    (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	if (is_multicast_ether_addr(mgmt->da)) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* do not return rejected action frames */ | 
 | 	if (mgmt->u.action.category & 0x80) | 
 | 		return RX_DROP_U_REJECTED_ACTION_RESPONSE; | 
 |  | 
 | 	nskb = skb_copy_expand(rx->skb, local->hw.extra_tx_headroom, 0, | 
 | 			       GFP_ATOMIC); | 
 | 	if (nskb) { | 
 | 		struct ieee80211_mgmt *nmgmt = (void *)nskb->data; | 
 |  | 
 | 		nmgmt->u.action.category |= 0x80; | 
 | 		memcpy(nmgmt->da, nmgmt->sa, ETH_ALEN); | 
 | 		memcpy(nmgmt->sa, rx->sdata->vif.addr, ETH_ALEN); | 
 |  | 
 | 		memset(nskb->cb, 0, sizeof(nskb->cb)); | 
 |  | 
 | 		if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { | 
 | 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb); | 
 |  | 
 | 			info->flags = IEEE80211_TX_CTL_TX_OFFCHAN | | 
 | 				      IEEE80211_TX_INTFL_OFFCHAN_TX_OK | | 
 | 				      IEEE80211_TX_CTL_NO_CCK_RATE; | 
 | 			if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) | 
 | 				info->hw_queue = | 
 | 					local->hw.offchannel_tx_hw_queue; | 
 | 		} | 
 |  | 
 | 		__ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7, -1, | 
 | 					    status->band); | 
 | 	} | 
 |  | 
 | 	return RX_DROP_U_UNKNOWN_ACTION_REJECTED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_ext(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_hdr *hdr = (void *)rx->skb->data; | 
 |  | 
 | 	if (!ieee80211_is_ext(hdr->frame_control)) | 
 | 		return RX_CONTINUE; | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return RX_DROP; | 
 |  | 
 | 	/* for now only beacons are ext, so queue them */ | 
 | 	ieee80211_queue_skb_to_iface(sdata, rx->link_id, rx->sta, rx->skb); | 
 |  | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static ieee80211_rx_result debug_noinline | 
 | ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_mgmt *mgmt = (void *)rx->skb->data; | 
 | 	__le16 stype; | 
 |  | 
 | 	stype = mgmt->frame_control & cpu_to_le16(IEEE80211_FCTL_STYPE); | 
 |  | 
 | 	if (!ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_OCB && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return RX_DROP; | 
 |  | 
 | 	switch (stype) { | 
 | 	case cpu_to_le16(IEEE80211_STYPE_AUTH): | 
 | 	case cpu_to_le16(IEEE80211_STYPE_BEACON): | 
 | 	case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP): | 
 | 		/* process for all: mesh, mlme, ibss */ | 
 | 		break; | 
 | 	case cpu_to_le16(IEEE80211_STYPE_DEAUTH): | 
 | 		if (is_multicast_ether_addr(mgmt->da) && | 
 | 		    !is_broadcast_ether_addr(mgmt->da)) | 
 | 			return RX_DROP; | 
 |  | 
 | 		/* process only for station/IBSS */ | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
 | 			return RX_DROP; | 
 | 		break; | 
 | 	case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): | 
 | 	case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): | 
 | 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC): | 
 | 		if (is_multicast_ether_addr(mgmt->da) && | 
 | 		    !is_broadcast_ether_addr(mgmt->da)) | 
 | 			return RX_DROP; | 
 |  | 
 | 		/* process only for station */ | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 			return RX_DROP; | 
 | 		break; | 
 | 	case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): | 
 | 		/* process only for ibss and mesh */ | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_MESH_POINT) | 
 | 			return RX_DROP; | 
 | 		break; | 
 | 	default: | 
 | 		return RX_DROP; | 
 | 	} | 
 |  | 
 | 	ieee80211_queue_skb_to_iface(sdata, rx->link_id, rx->sta, rx->skb); | 
 |  | 
 | 	return RX_QUEUED; | 
 | } | 
 |  | 
 | static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx, | 
 | 					 ieee80211_rx_result res) | 
 | { | 
 | 	if (res == RX_QUEUED) { | 
 | 		I802_DEBUG_INC(rx->sdata->local->rx_handlers_queued); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (res != RX_CONTINUE) { | 
 | 		I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop); | 
 | 		if (rx->sta) | 
 | 			rx->link_sta->rx_stats.dropped++; | 
 | 	} | 
 |  | 
 | 	kfree_skb_reason(rx->skb, (__force u32)res); | 
 | } | 
 |  | 
 | static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, | 
 | 				  struct sk_buff_head *frames) | 
 | { | 
 | 	ieee80211_rx_result res = RX_DROP; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | #define CALL_RXH(rxh)			\ | 
 | 	do {				\ | 
 | 		res = rxh(rx);		\ | 
 | 		if (res != RX_CONTINUE)	\ | 
 | 			goto rxh_next;  \ | 
 | 	} while (0) | 
 |  | 
 | 	/* Lock here to avoid hitting all of the data used in the RX | 
 | 	 * path (e.g. key data, station data, ...) concurrently when | 
 | 	 * a frame is released from the reorder buffer due to timeout | 
 | 	 * from the timer, potentially concurrently with RX from the | 
 | 	 * driver. | 
 | 	 */ | 
 | 	spin_lock_bh(&rx->local->rx_path_lock); | 
 |  | 
 | 	while ((skb = __skb_dequeue(frames))) { | 
 | 		/* | 
 | 		 * all the other fields are valid across frames | 
 | 		 * that belong to an aMPDU since they are on the | 
 | 		 * same TID from the same station | 
 | 		 */ | 
 | 		rx->skb = skb; | 
 |  | 
 | 		if (WARN_ON_ONCE(!rx->link)) | 
 | 			goto rxh_next; | 
 |  | 
 | 		CALL_RXH(ieee80211_rx_h_check_more_data); | 
 | 		CALL_RXH(ieee80211_rx_h_uapsd_and_pspoll); | 
 | 		CALL_RXH(ieee80211_rx_h_sta_process); | 
 | 		CALL_RXH(ieee80211_rx_h_decrypt); | 
 | 		CALL_RXH(ieee80211_rx_h_defragment); | 
 | 		CALL_RXH(ieee80211_rx_h_michael_mic_verify); | 
 | 		/* must be after MMIC verify so header is counted in MPDU mic */ | 
 | 		CALL_RXH(ieee80211_rx_h_amsdu); | 
 | 		CALL_RXH(ieee80211_rx_h_data); | 
 |  | 
 | 		/* special treatment -- needs the queue */ | 
 | 		res = ieee80211_rx_h_ctrl(rx, frames); | 
 | 		if (res != RX_CONTINUE) | 
 | 			goto rxh_next; | 
 |  | 
 | 		CALL_RXH(ieee80211_rx_h_mgmt_check); | 
 | 		CALL_RXH(ieee80211_rx_h_action); | 
 | 		CALL_RXH(ieee80211_rx_h_userspace_mgmt); | 
 | 		CALL_RXH(ieee80211_rx_h_action_post_userspace); | 
 | 		CALL_RXH(ieee80211_rx_h_action_return); | 
 | 		CALL_RXH(ieee80211_rx_h_ext); | 
 | 		CALL_RXH(ieee80211_rx_h_mgmt); | 
 |  | 
 |  rxh_next: | 
 | 		ieee80211_rx_handlers_result(rx, res); | 
 |  | 
 | #undef CALL_RXH | 
 | 	} | 
 |  | 
 | 	spin_unlock_bh(&rx->local->rx_path_lock); | 
 | } | 
 |  | 
 | static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct sk_buff_head reorder_release; | 
 | 	ieee80211_rx_result res = RX_DROP; | 
 |  | 
 | 	__skb_queue_head_init(&reorder_release); | 
 |  | 
 | #define CALL_RXH(rxh)			\ | 
 | 	do {				\ | 
 | 		res = rxh(rx);		\ | 
 | 		if (res != RX_CONTINUE)	\ | 
 | 			goto rxh_next;  \ | 
 | 	} while (0) | 
 |  | 
 | 	CALL_RXH(ieee80211_rx_h_check_dup); | 
 | 	CALL_RXH(ieee80211_rx_h_check); | 
 |  | 
 | 	ieee80211_rx_reorder_ampdu(rx, &reorder_release); | 
 |  | 
 | 	ieee80211_rx_handlers(rx, &reorder_release); | 
 | 	return; | 
 |  | 
 |  rxh_next: | 
 | 	ieee80211_rx_handlers_result(rx, res); | 
 |  | 
 | #undef CALL_RXH | 
 | } | 
 |  | 
 | static bool | 
 | ieee80211_rx_is_valid_sta_link_id(struct ieee80211_sta *sta, u8 link_id) | 
 | { | 
 | 	return !!(sta->valid_links & BIT(link_id)); | 
 | } | 
 |  | 
 | static bool ieee80211_rx_data_set_link(struct ieee80211_rx_data *rx, | 
 | 				       u8 link_id) | 
 | { | 
 | 	rx->link_id = link_id; | 
 | 	rx->link = rcu_dereference(rx->sdata->link[link_id]); | 
 |  | 
 | 	if (!rx->sta) | 
 | 		return rx->link; | 
 |  | 
 | 	if (!ieee80211_rx_is_valid_sta_link_id(&rx->sta->sta, link_id)) | 
 | 		return false; | 
 |  | 
 | 	rx->link_sta = rcu_dereference(rx->sta->link[link_id]); | 
 |  | 
 | 	return rx->link && rx->link_sta; | 
 | } | 
 |  | 
 | static bool ieee80211_rx_data_set_sta(struct ieee80211_rx_data *rx, | 
 | 				      struct sta_info *sta, int link_id) | 
 | { | 
 | 	rx->link_id = link_id; | 
 | 	rx->sta = sta; | 
 |  | 
 | 	if (sta) { | 
 | 		rx->local = sta->sdata->local; | 
 | 		if (!rx->sdata) | 
 | 			rx->sdata = sta->sdata; | 
 | 		rx->link_sta = &sta->deflink; | 
 | 	} else { | 
 | 		rx->link_sta = NULL; | 
 | 	} | 
 |  | 
 | 	if (link_id < 0) { | 
 | 		if (ieee80211_vif_is_mld(&rx->sdata->vif) && | 
 | 		    sta && !sta->sta.valid_links) | 
 | 			rx->link = | 
 | 				rcu_dereference(rx->sdata->link[sta->deflink.link_id]); | 
 | 		else | 
 | 			rx->link = &rx->sdata->deflink; | 
 | 	} else if (!ieee80211_rx_data_set_link(rx, link_id)) { | 
 | 		return false; | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /* | 
 |  * This function makes calls into the RX path, therefore | 
 |  * it has to be invoked under RCU read lock. | 
 |  */ | 
 | void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) | 
 | { | 
 | 	struct sk_buff_head frames; | 
 | 	struct ieee80211_rx_data rx = { | 
 | 		/* This is OK -- must be QoS data frame */ | 
 | 		.security_idx = tid, | 
 | 		.seqno_idx = tid, | 
 | 	}; | 
 | 	struct tid_ampdu_rx *tid_agg_rx; | 
 | 	int link_id = -1; | 
 |  | 
 | 	/* FIXME: statistics won't be right with this */ | 
 | 	if (sta->sta.valid_links) | 
 | 		link_id = ffs(sta->sta.valid_links) - 1; | 
 |  | 
 | 	if (!ieee80211_rx_data_set_sta(&rx, sta, link_id)) | 
 | 		return; | 
 |  | 
 | 	tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]); | 
 | 	if (!tid_agg_rx) | 
 | 		return; | 
 |  | 
 | 	__skb_queue_head_init(&frames); | 
 |  | 
 | 	spin_lock(&tid_agg_rx->reorder_lock); | 
 | 	ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx, &frames); | 
 | 	spin_unlock(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	if (!skb_queue_empty(&frames)) { | 
 | 		struct ieee80211_event event = { | 
 | 			.type = BA_FRAME_TIMEOUT, | 
 | 			.u.ba.tid = tid, | 
 | 			.u.ba.sta = &sta->sta, | 
 | 		}; | 
 | 		drv_event_callback(rx.local, rx.sdata, &event); | 
 | 	} | 
 |  | 
 | 	ieee80211_rx_handlers(&rx, &frames); | 
 | } | 
 |  | 
 | void ieee80211_mark_rx_ba_filtered_frames(struct ieee80211_sta *pubsta, u8 tid, | 
 | 					  u16 ssn, u64 filtered, | 
 | 					  u16 received_mpdus) | 
 | { | 
 | 	struct ieee80211_local *local; | 
 | 	struct sta_info *sta; | 
 | 	struct tid_ampdu_rx *tid_agg_rx; | 
 | 	struct sk_buff_head frames; | 
 | 	struct ieee80211_rx_data rx = { | 
 | 		/* This is OK -- must be QoS data frame */ | 
 | 		.security_idx = tid, | 
 | 		.seqno_idx = tid, | 
 | 	}; | 
 | 	int i, diff; | 
 |  | 
 | 	if (WARN_ON(!pubsta || tid >= IEEE80211_NUM_TIDS)) | 
 | 		return; | 
 |  | 
 | 	__skb_queue_head_init(&frames); | 
 |  | 
 | 	sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	local = sta->sdata->local; | 
 | 	WARN_ONCE(local->hw.max_rx_aggregation_subframes > 64, | 
 | 		  "RX BA marker can't support max_rx_aggregation_subframes %u > 64\n", | 
 | 		  local->hw.max_rx_aggregation_subframes); | 
 |  | 
 | 	if (!ieee80211_rx_data_set_sta(&rx, sta, -1)) | 
 | 		return; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]); | 
 | 	if (!tid_agg_rx) | 
 | 		goto out; | 
 |  | 
 | 	spin_lock_bh(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	if (received_mpdus >= IEEE80211_SN_MODULO >> 1) { | 
 | 		int release; | 
 |  | 
 | 		/* release all frames in the reorder buffer */ | 
 | 		release = (tid_agg_rx->head_seq_num + tid_agg_rx->buf_size) % | 
 | 			   IEEE80211_SN_MODULO; | 
 | 		ieee80211_release_reorder_frames(sta->sdata, tid_agg_rx, | 
 | 						 release, &frames); | 
 | 		/* update ssn to match received ssn */ | 
 | 		tid_agg_rx->head_seq_num = ssn; | 
 | 	} else { | 
 | 		ieee80211_release_reorder_frames(sta->sdata, tid_agg_rx, ssn, | 
 | 						 &frames); | 
 | 	} | 
 |  | 
 | 	/* handle the case that received ssn is behind the mac ssn. | 
 | 	 * it can be tid_agg_rx->buf_size behind and still be valid */ | 
 | 	diff = (tid_agg_rx->head_seq_num - ssn) & IEEE80211_SN_MASK; | 
 | 	if (diff >= tid_agg_rx->buf_size) { | 
 | 		tid_agg_rx->reorder_buf_filtered = 0; | 
 | 		goto release; | 
 | 	} | 
 | 	filtered = filtered >> diff; | 
 | 	ssn += diff; | 
 |  | 
 | 	/* update bitmap */ | 
 | 	for (i = 0; i < tid_agg_rx->buf_size; i++) { | 
 | 		int index = (ssn + i) % tid_agg_rx->buf_size; | 
 |  | 
 | 		tid_agg_rx->reorder_buf_filtered &= ~BIT_ULL(index); | 
 | 		if (filtered & BIT_ULL(i)) | 
 | 			tid_agg_rx->reorder_buf_filtered |= BIT_ULL(index); | 
 | 	} | 
 |  | 
 | 	/* now process also frames that the filter marking released */ | 
 | 	ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx, &frames); | 
 |  | 
 | release: | 
 | 	spin_unlock_bh(&tid_agg_rx->reorder_lock); | 
 |  | 
 | 	ieee80211_rx_handlers(&rx, &frames); | 
 |  | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_mark_rx_ba_filtered_frames); | 
 |  | 
 | /* main receive path */ | 
 |  | 
 | static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr) | 
 | { | 
 | 	return ether_addr_equal(raddr, addr) || | 
 | 	       is_broadcast_ether_addr(raddr); | 
 | } | 
 |  | 
 | static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_hdr *hdr = (void *)skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type); | 
 | 	bool multicast = is_multicast_ether_addr(hdr->addr1) || | 
 | 			 ieee80211_is_s1g_beacon(hdr->frame_control); | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		if (!bssid && !sdata->u.mgd.use_4addr) | 
 | 			return false; | 
 | 		if (ieee80211_is_first_frag(hdr->seq_ctrl) && | 
 | 		    ieee80211_is_robust_mgmt_frame(skb) && !rx->sta) | 
 | 			return false; | 
 | 		if (multicast) | 
 | 			return true; | 
 | 		return ieee80211_is_our_addr(sdata, hdr->addr1, &rx->link_id); | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		if (!bssid) | 
 | 			return false; | 
 | 		if (ether_addr_equal(sdata->vif.addr, hdr->addr2) || | 
 | 		    ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2) || | 
 | 		    !is_valid_ether_addr(hdr->addr2)) | 
 | 			return false; | 
 | 		if (ieee80211_is_beacon(hdr->frame_control)) | 
 | 			return true; | 
 | 		if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) | 
 | 			return false; | 
 | 		if (!multicast && | 
 | 		    !ether_addr_equal(sdata->vif.addr, hdr->addr1)) | 
 | 			return false; | 
 | 		if (!rx->sta) { | 
 | 			int rate_idx; | 
 | 			if (status->encoding != RX_ENC_LEGACY) | 
 | 				rate_idx = 0; /* TODO: HT/VHT rates */ | 
 | 			else | 
 | 				rate_idx = status->rate_idx; | 
 | 			ieee80211_ibss_rx_no_sta(sdata, bssid, hdr->addr2, | 
 | 						 BIT(rate_idx)); | 
 | 		} | 
 | 		return true; | 
 | 	case NL80211_IFTYPE_OCB: | 
 | 		if (!bssid) | 
 | 			return false; | 
 | 		if (!ieee80211_is_data_present(hdr->frame_control)) | 
 | 			return false; | 
 | 		if (!is_broadcast_ether_addr(bssid)) | 
 | 			return false; | 
 | 		if (!multicast && | 
 | 		    !ether_addr_equal(sdata->dev->dev_addr, hdr->addr1)) | 
 | 			return false; | 
 | 		/* reject invalid/our STA address */ | 
 | 		if (!is_valid_ether_addr(hdr->addr2) || | 
 | 		    ether_addr_equal(sdata->dev->dev_addr, hdr->addr2)) | 
 | 			return false; | 
 | 		if (!rx->sta) { | 
 | 			int rate_idx; | 
 | 			if (status->encoding != RX_ENC_LEGACY) | 
 | 				rate_idx = 0; /* TODO: HT rates */ | 
 | 			else | 
 | 				rate_idx = status->rate_idx; | 
 | 			ieee80211_ocb_rx_no_sta(sdata, bssid, hdr->addr2, | 
 | 						BIT(rate_idx)); | 
 | 		} | 
 | 		return true; | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		if (ether_addr_equal(sdata->vif.addr, hdr->addr2)) | 
 | 			return false; | 
 | 		if (multicast) | 
 | 			return true; | 
 | 		return ether_addr_equal(sdata->vif.addr, hdr->addr1); | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		if (!bssid) | 
 | 			return ieee80211_is_our_addr(sdata, hdr->addr1, | 
 | 						     &rx->link_id); | 
 |  | 
 | 		if (!is_broadcast_ether_addr(bssid) && | 
 | 		    !ieee80211_is_our_addr(sdata, bssid, NULL)) { | 
 | 			/* | 
 | 			 * Accept public action frames even when the | 
 | 			 * BSSID doesn't match, this is used for P2P | 
 | 			 * and location updates. Note that mac80211 | 
 | 			 * itself never looks at these frames. | 
 | 			 */ | 
 | 			if (!multicast && | 
 | 			    !ieee80211_is_our_addr(sdata, hdr->addr1, | 
 | 						   &rx->link_id)) | 
 | 				return false; | 
 | 			if (ieee80211_is_public_action(hdr, skb->len)) | 
 | 				return true; | 
 | 			return ieee80211_is_beacon(hdr->frame_control); | 
 | 		} | 
 |  | 
 | 		if (!ieee80211_has_tods(hdr->frame_control)) { | 
 | 			/* ignore data frames to TDLS-peers */ | 
 | 			if (ieee80211_is_data(hdr->frame_control)) | 
 | 				return false; | 
 | 			/* ignore action frames to TDLS-peers */ | 
 | 			if (ieee80211_is_action(hdr->frame_control) && | 
 | 			    !is_broadcast_ether_addr(bssid) && | 
 | 			    !ether_addr_equal(bssid, hdr->addr1)) | 
 | 				return false; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * 802.11-2016 Table 9-26 says that for data frames, A1 must be | 
 | 		 * the BSSID - we've checked that already but may have accepted | 
 | 		 * the wildcard (ff:ff:ff:ff:ff:ff). | 
 | 		 * | 
 | 		 * It also says: | 
 | 		 *	The BSSID of the Data frame is determined as follows: | 
 | 		 *	a) If the STA is contained within an AP or is associated | 
 | 		 *	   with an AP, the BSSID is the address currently in use | 
 | 		 *	   by the STA contained in the AP. | 
 | 		 * | 
 | 		 * So we should not accept data frames with an address that's | 
 | 		 * multicast. | 
 | 		 * | 
 | 		 * Accepting it also opens a security problem because stations | 
 | 		 * could encrypt it with the GTK and inject traffic that way. | 
 | 		 */ | 
 | 		if (ieee80211_is_data(hdr->frame_control) && multicast) | 
 | 			return false; | 
 |  | 
 | 		return true; | 
 | 	case NL80211_IFTYPE_P2P_DEVICE: | 
 | 		return ieee80211_is_public_action(hdr, skb->len) || | 
 | 		       ieee80211_is_probe_req(hdr->frame_control) || | 
 | 		       ieee80211_is_probe_resp(hdr->frame_control) || | 
 | 		       ieee80211_is_beacon(hdr->frame_control) || | 
 | 		       (ieee80211_is_auth(hdr->frame_control) && | 
 | 			ether_addr_equal(sdata->vif.addr, hdr->addr1)); | 
 | 	case NL80211_IFTYPE_NAN: | 
 | 		/* Accept only frames that are addressed to the NAN cluster | 
 | 		 * (based on the Cluster ID). From these frames, accept only | 
 | 		 * action frames or authentication frames that are addressed to | 
 | 		 * the local NAN interface. | 
 | 		 */ | 
 | 		return memcmp(sdata->wdev.u.nan.cluster_id, | 
 | 			      hdr->addr3, ETH_ALEN) == 0 && | 
 | 			(ieee80211_is_public_action(hdr, skb->len) || | 
 | 			 (ieee80211_is_auth(hdr->frame_control) && | 
 | 			  ether_addr_equal(sdata->vif.addr, hdr->addr1))); | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	WARN_ON_ONCE(1); | 
 | 	return false; | 
 | } | 
 |  | 
 | void ieee80211_check_fast_rx(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_key *key; | 
 | 	struct ieee80211_fast_rx fastrx = { | 
 | 		.dev = sdata->dev, | 
 | 		.vif_type = sdata->vif.type, | 
 | 		.control_port_protocol = sdata->control_port_protocol, | 
 | 	}, *old, *new = NULL; | 
 | 	u32 offload_flags; | 
 | 	bool set_offload = false; | 
 | 	bool assign = false; | 
 | 	bool offload; | 
 |  | 
 | 	/* use sparse to check that we don't return without updating */ | 
 | 	__acquire(check_fast_rx); | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(fastrx.rfc1042_hdr) != sizeof(rfc1042_header)); | 
 | 	BUILD_BUG_ON(sizeof(fastrx.rfc1042_hdr) != ETH_ALEN); | 
 | 	ether_addr_copy(fastrx.rfc1042_hdr, rfc1042_header); | 
 | 	ether_addr_copy(fastrx.vif_addr, sdata->vif.addr); | 
 |  | 
 | 	fastrx.uses_rss = ieee80211_hw_check(&local->hw, USES_RSS); | 
 |  | 
 | 	/* fast-rx doesn't do reordering */ | 
 | 	if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) && | 
 | 	    !ieee80211_hw_check(&local->hw, SUPPORTS_REORDERING_BUFFER)) | 
 | 		goto clear; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		if (sta->sta.tdls) { | 
 | 			fastrx.da_offs = offsetof(struct ieee80211_hdr, addr1); | 
 | 			fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr2); | 
 | 			fastrx.expected_ds_bits = 0; | 
 | 		} else { | 
 | 			fastrx.da_offs = offsetof(struct ieee80211_hdr, addr1); | 
 | 			fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr3); | 
 | 			fastrx.expected_ds_bits = | 
 | 				cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
 | 		} | 
 |  | 
 | 		if (sdata->u.mgd.use_4addr && !sta->sta.tdls) { | 
 | 			fastrx.expected_ds_bits |= | 
 | 				cpu_to_le16(IEEE80211_FCTL_TODS); | 
 | 			fastrx.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
 | 			fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr4); | 
 | 		} | 
 |  | 
 | 		if (!sdata->u.mgd.powersave) | 
 | 			break; | 
 |  | 
 | 		/* software powersave is a huge mess, avoid all of it */ | 
 | 		if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) | 
 | 			goto clear; | 
 | 		if (ieee80211_hw_check(&local->hw, SUPPORTS_PS) && | 
 | 		    !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) | 
 | 			goto clear; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		/* parallel-rx requires this, at least with calls to | 
 | 		 * ieee80211_sta_ps_transition() | 
 | 		 */ | 
 | 		if (!ieee80211_hw_check(&local->hw, AP_LINK_PS)) | 
 | 			goto clear; | 
 | 		fastrx.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
 | 		fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr2); | 
 | 		fastrx.expected_ds_bits = cpu_to_le16(IEEE80211_FCTL_TODS); | 
 |  | 
 | 		fastrx.internal_forward = | 
 | 			!(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) && | 
 | 			(sdata->vif.type != NL80211_IFTYPE_AP_VLAN || | 
 | 			 !sdata->u.vlan.sta); | 
 |  | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 		    sdata->u.vlan.sta) { | 
 | 			fastrx.expected_ds_bits |= | 
 | 				cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
 | 			fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr4); | 
 | 			fastrx.internal_forward = 0; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		fastrx.expected_ds_bits = cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
 | 						      IEEE80211_FCTL_TODS); | 
 | 		fastrx.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
 | 		fastrx.sa_offs = offsetof(struct ieee80211_hdr, addr4); | 
 | 		break; | 
 | 	default: | 
 | 		goto clear; | 
 | 	} | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
 | 		goto clear; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	key = rcu_dereference(sta->ptk[sta->ptk_idx]); | 
 | 	if (!key) | 
 | 		key = rcu_dereference(sdata->default_unicast_key); | 
 | 	if (key) { | 
 | 		switch (key->conf.cipher) { | 
 | 		case WLAN_CIPHER_SUITE_TKIP: | 
 | 			/* we don't want to deal with MMIC in fast-rx */ | 
 | 			goto clear_rcu; | 
 | 		case WLAN_CIPHER_SUITE_CCMP: | 
 | 		case WLAN_CIPHER_SUITE_CCMP_256: | 
 | 		case WLAN_CIPHER_SUITE_GCMP: | 
 | 		case WLAN_CIPHER_SUITE_GCMP_256: | 
 | 			break; | 
 | 		default: | 
 | 			/* We also don't want to deal with | 
 | 			 * WEP or cipher scheme. | 
 | 			 */ | 
 | 			goto clear_rcu; | 
 | 		} | 
 |  | 
 | 		fastrx.key = true; | 
 | 		fastrx.icv_len = key->conf.icv_len; | 
 | 	} | 
 |  | 
 | 	assign = true; | 
 |  clear_rcu: | 
 | 	rcu_read_unlock(); | 
 |  clear: | 
 | 	__release(check_fast_rx); | 
 |  | 
 | 	if (assign) | 
 | 		new = kmemdup(&fastrx, sizeof(fastrx), GFP_KERNEL); | 
 |  | 
 | 	offload_flags = get_bss_sdata(sdata)->vif.offload_flags; | 
 | 	offload = offload_flags & IEEE80211_OFFLOAD_DECAP_ENABLED; | 
 |  | 
 | 	if (assign && offload) | 
 | 		set_offload = !test_and_set_sta_flag(sta, WLAN_STA_DECAP_OFFLOAD); | 
 | 	else | 
 | 		set_offload = test_and_clear_sta_flag(sta, WLAN_STA_DECAP_OFFLOAD); | 
 |  | 
 | 	if (set_offload) | 
 | 		drv_sta_set_decap_offload(local, sdata, &sta->sta, assign); | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 | 	old = rcu_dereference_protected(sta->fast_rx, true); | 
 | 	rcu_assign_pointer(sta->fast_rx, new); | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	if (old) | 
 | 		kfree_rcu(old, rcu_head); | 
 | } | 
 |  | 
 | void ieee80211_clear_fast_rx(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_fast_rx *old; | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 | 	old = rcu_dereference_protected(sta->fast_rx, true); | 
 | 	RCU_INIT_POINTER(sta->fast_rx, NULL); | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	if (old) | 
 | 		kfree_rcu(old, rcu_head); | 
 | } | 
 |  | 
 | void __ieee80211_check_fast_rx_iface(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	lockdep_assert_wiphy(local->hw.wiphy); | 
 |  | 
 | 	list_for_each_entry(sta, &local->sta_list, list) { | 
 | 		if (sdata != sta->sdata && | 
 | 		    (!sta->sdata->bss || sta->sdata->bss != sdata->bss)) | 
 | 			continue; | 
 | 		ieee80211_check_fast_rx(sta); | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_check_fast_rx_iface(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	lockdep_assert_wiphy(local->hw.wiphy); | 
 |  | 
 | 	__ieee80211_check_fast_rx_iface(sdata); | 
 | } | 
 |  | 
 | static void ieee80211_rx_8023(struct ieee80211_rx_data *rx, | 
 | 			      struct ieee80211_fast_rx *fast_rx, | 
 | 			      int orig_len) | 
 | { | 
 | 	struct ieee80211_sta_rx_stats *stats; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); | 
 | 	struct sta_info *sta = rx->sta; | 
 | 	struct link_sta_info *link_sta; | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	void *sa = skb->data + ETH_ALEN; | 
 | 	void *da = skb->data; | 
 |  | 
 | 	if (rx->link_id >= 0) { | 
 | 		link_sta = rcu_dereference(sta->link[rx->link_id]); | 
 | 		if (WARN_ON_ONCE(!link_sta)) { | 
 | 			dev_kfree_skb(rx->skb); | 
 | 			return; | 
 | 		} | 
 | 	} else { | 
 | 		link_sta = &sta->deflink; | 
 | 	} | 
 |  | 
 | 	stats = &link_sta->rx_stats; | 
 | 	if (fast_rx->uses_rss) | 
 | 		stats = this_cpu_ptr(link_sta->pcpu_rx_stats); | 
 |  | 
 | 	/* statistics part of ieee80211_rx_h_sta_process() */ | 
 | 	if (!(status->flag & RX_FLAG_NO_SIGNAL_VAL)) { | 
 | 		stats->last_signal = status->signal; | 
 | 		if (!fast_rx->uses_rss) | 
 | 			ewma_signal_add(&link_sta->rx_stats_avg.signal, | 
 | 					-status->signal); | 
 | 	} | 
 |  | 
 | 	if (status->chains) { | 
 | 		int i; | 
 |  | 
 | 		stats->chains = status->chains; | 
 | 		for (i = 0; i < ARRAY_SIZE(status->chain_signal); i++) { | 
 | 			int signal = status->chain_signal[i]; | 
 |  | 
 | 			if (!(status->chains & BIT(i))) | 
 | 				continue; | 
 |  | 
 | 			stats->chain_signal_last[i] = signal; | 
 | 			if (!fast_rx->uses_rss) | 
 | 				ewma_signal_add(&link_sta->rx_stats_avg.chain_signal[i], | 
 | 						-signal); | 
 | 		} | 
 | 	} | 
 | 	/* end of statistics */ | 
 |  | 
 | 	stats->last_rx = jiffies; | 
 | 	stats->last_rate = sta_stats_encode_rate(status); | 
 |  | 
 | 	stats->fragments++; | 
 | 	stats->packets++; | 
 |  | 
 | 	skb->dev = fast_rx->dev; | 
 |  | 
 | 	dev_sw_netstats_rx_add(fast_rx->dev, skb->len); | 
 |  | 
 | 	/* The seqno index has the same property as needed | 
 | 	 * for the rx_msdu field, i.e. it is IEEE80211_NUM_TIDS | 
 | 	 * for non-QoS-data frames. Here we know it's a data | 
 | 	 * frame, so count MSDUs. | 
 | 	 */ | 
 | 	u64_stats_update_begin(&stats->syncp); | 
 | 	stats->msdu[rx->seqno_idx]++; | 
 | 	stats->bytes += orig_len; | 
 | 	u64_stats_update_end(&stats->syncp); | 
 |  | 
 | 	if (fast_rx->internal_forward) { | 
 | 		struct sk_buff *xmit_skb = NULL; | 
 | 		if (is_multicast_ether_addr(da)) { | 
 | 			xmit_skb = skb_copy(skb, GFP_ATOMIC); | 
 | 		} else if (!ether_addr_equal(da, sa) && | 
 | 			   sta_info_get(rx->sdata, da)) { | 
 | 			xmit_skb = skb; | 
 | 			skb = NULL; | 
 | 		} | 
 |  | 
 | 		if (xmit_skb) { | 
 | 			/* | 
 | 			 * Send to wireless media and increase priority by 256 | 
 | 			 * to keep the received priority instead of | 
 | 			 * reclassifying the frame (see cfg80211_classify8021d). | 
 | 			 */ | 
 | 			xmit_skb->priority += 256; | 
 | 			xmit_skb->protocol = htons(ETH_P_802_3); | 
 | 			skb_reset_network_header(xmit_skb); | 
 | 			skb_reset_mac_header(xmit_skb); | 
 | 			dev_queue_xmit(xmit_skb); | 
 | 		} | 
 |  | 
 | 		if (!skb) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	/* deliver to local stack */ | 
 | 	skb->protocol = eth_type_trans(skb, fast_rx->dev); | 
 | 	ieee80211_deliver_skb_to_local_stack(skb, rx); | 
 | } | 
 |  | 
 | static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx, | 
 | 				     struct ieee80211_fast_rx *fast_rx) | 
 | { | 
 | 	struct sk_buff *skb = rx->skb; | 
 | 	struct ieee80211_hdr *hdr = (void *)skb->data; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	static ieee80211_rx_result res; | 
 | 	int orig_len = skb->len; | 
 | 	int hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 | 	int snap_offs = hdrlen; | 
 | 	struct { | 
 | 		u8 snap[sizeof(rfc1042_header)]; | 
 | 		__be16 proto; | 
 | 	} *payload __aligned(2); | 
 | 	struct { | 
 | 		u8 da[ETH_ALEN]; | 
 | 		u8 sa[ETH_ALEN]; | 
 | 	} addrs __aligned(2); | 
 | 	struct ieee80211_sta_rx_stats *stats; | 
 |  | 
 | 	/* for parallel-rx, we need to have DUP_VALIDATED, otherwise we write | 
 | 	 * to a common data structure; drivers can implement that per queue | 
 | 	 * but we don't have that information in mac80211 | 
 | 	 */ | 
 | 	if (!(status->flag & RX_FLAG_DUP_VALIDATED)) | 
 | 		return false; | 
 |  | 
 | #define FAST_RX_CRYPT_FLAGS	(RX_FLAG_PN_VALIDATED | RX_FLAG_DECRYPTED) | 
 |  | 
 | 	/* If using encryption, we also need to have: | 
 | 	 *  - PN_VALIDATED: similar, but the implementation is tricky | 
 | 	 *  - DECRYPTED: necessary for PN_VALIDATED | 
 | 	 */ | 
 | 	if (fast_rx->key && | 
 | 	    (status->flag & FAST_RX_CRYPT_FLAGS) != FAST_RX_CRYPT_FLAGS) | 
 | 		return false; | 
 |  | 
 | 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
 | 		return false; | 
 |  | 
 | 	if (unlikely(ieee80211_is_frag(hdr))) | 
 | 		return false; | 
 |  | 
 | 	/* Since our interface address cannot be multicast, this | 
 | 	 * implicitly also rejects multicast frames without the | 
 | 	 * explicit check. | 
 | 	 * | 
 | 	 * We shouldn't get any *data* frames not addressed to us | 
 | 	 * (AP mode will accept multicast *management* frames), but | 
 | 	 * punting here will make it go through the full checks in | 
 | 	 * ieee80211_accept_frame(). | 
 | 	 */ | 
 | 	if (!ether_addr_equal(fast_rx->vif_addr, hdr->addr1)) | 
 | 		return false; | 
 |  | 
 | 	if ((hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
 | 					      IEEE80211_FCTL_TODS)) != | 
 | 	    fast_rx->expected_ds_bits) | 
 | 		return false; | 
 |  | 
 | 	/* assign the key to drop unencrypted frames (later) | 
 | 	 * and strip the IV/MIC if necessary | 
 | 	 */ | 
 | 	if (fast_rx->key && !(status->flag & RX_FLAG_IV_STRIPPED)) { | 
 | 		/* GCMP header length is the same */ | 
 | 		snap_offs += IEEE80211_CCMP_HDR_LEN; | 
 | 	} | 
 |  | 
 | 	if (!ieee80211_vif_is_mesh(&rx->sdata->vif) && | 
 | 	    !(status->rx_flags & IEEE80211_RX_AMSDU)) { | 
 | 		if (!pskb_may_pull(skb, snap_offs + sizeof(*payload))) | 
 | 			return false; | 
 |  | 
 | 		payload = (void *)(skb->data + snap_offs); | 
 |  | 
 | 		if (!ether_addr_equal(payload->snap, fast_rx->rfc1042_hdr)) | 
 | 			return false; | 
 |  | 
 | 		/* Don't handle these here since they require special code. | 
 | 		 * Accept AARP and IPX even though they should come with a | 
 | 		 * bridge-tunnel header - but if we get them this way then | 
 | 		 * there's little point in discarding them. | 
 | 		 */ | 
 | 		if (unlikely(payload->proto == cpu_to_be16(ETH_P_TDLS) || | 
 | 			     payload->proto == fast_rx->control_port_protocol)) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	/* after this point, don't punt to the slowpath! */ | 
 |  | 
 | 	if (rx->key && !(status->flag & RX_FLAG_MIC_STRIPPED) && | 
 | 	    pskb_trim(skb, skb->len - fast_rx->icv_len)) | 
 | 		goto drop; | 
 |  | 
 | 	if (rx->key && !ieee80211_has_protected(hdr->frame_control)) | 
 | 		goto drop; | 
 |  | 
 | 	if (status->rx_flags & IEEE80211_RX_AMSDU) { | 
 | 		if (__ieee80211_rx_h_amsdu(rx, snap_offs - hdrlen) != | 
 | 		    RX_QUEUED) | 
 | 			goto drop; | 
 |  | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	/* do the header conversion - first grab the addresses */ | 
 | 	ether_addr_copy(addrs.da, skb->data + fast_rx->da_offs); | 
 | 	ether_addr_copy(addrs.sa, skb->data + fast_rx->sa_offs); | 
 | 	if (ieee80211_vif_is_mesh(&rx->sdata->vif)) { | 
 | 	    skb_pull(skb, snap_offs - 2); | 
 | 	    put_unaligned_be16(skb->len - 2, skb->data); | 
 | 	} else { | 
 | 	    skb_postpull_rcsum(skb, skb->data + snap_offs, | 
 | 			       sizeof(rfc1042_header) + 2); | 
 |  | 
 | 	    /* remove the SNAP but leave the ethertype */ | 
 | 	    skb_pull(skb, snap_offs + sizeof(rfc1042_header)); | 
 | 	} | 
 | 	/* push the addresses in front */ | 
 | 	memcpy(skb_push(skb, sizeof(addrs)), &addrs, sizeof(addrs)); | 
 |  | 
 | 	res = ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb); | 
 | 	switch (res) { | 
 | 	case RX_QUEUED: | 
 | 		return true; | 
 | 	case RX_CONTINUE: | 
 | 		break; | 
 | 	default: | 
 | 		goto drop; | 
 | 	} | 
 |  | 
 | 	ieee80211_rx_8023(rx, fast_rx, orig_len); | 
 |  | 
 | 	return true; | 
 |  drop: | 
 | 	dev_kfree_skb(skb); | 
 |  | 
 | 	if (fast_rx->uses_rss) | 
 | 		stats = this_cpu_ptr(rx->link_sta->pcpu_rx_stats); | 
 | 	else | 
 | 		stats = &rx->link_sta->rx_stats; | 
 |  | 
 | 	stats->dropped++; | 
 | 	return true; | 
 | } | 
 |  | 
 | /* | 
 |  * This function returns whether or not the SKB | 
 |  * was destined for RX processing or not, which, | 
 |  * if consume is true, is equivalent to whether | 
 |  * or not the skb was consumed. | 
 |  */ | 
 | static bool ieee80211_prepare_and_rx_handle(struct ieee80211_rx_data *rx, | 
 | 					    struct sk_buff *skb, bool consume) | 
 | { | 
 | 	struct ieee80211_local *local = rx->local; | 
 | 	struct ieee80211_sub_if_data *sdata = rx->sdata; | 
 | 	struct ieee80211_hdr *hdr = (void *)skb->data; | 
 | 	struct link_sta_info *link_sta = rx->link_sta; | 
 | 	struct ieee80211_link_data *link = rx->link; | 
 |  | 
 | 	rx->skb = skb; | 
 |  | 
 | 	/* See if we can do fast-rx; if we have to copy we already lost, | 
 | 	 * so punt in that case. We should never have to deliver a data | 
 | 	 * frame to multiple interfaces anyway. | 
 | 	 * | 
 | 	 * We skip the ieee80211_accept_frame() call and do the necessary | 
 | 	 * checking inside ieee80211_invoke_fast_rx(). | 
 | 	 */ | 
 | 	if (consume && rx->sta) { | 
 | 		struct ieee80211_fast_rx *fast_rx; | 
 |  | 
 | 		fast_rx = rcu_dereference(rx->sta->fast_rx); | 
 | 		if (fast_rx && ieee80211_invoke_fast_rx(rx, fast_rx)) | 
 | 			return true; | 
 | 	} | 
 |  | 
 | 	if (!ieee80211_accept_frame(rx)) | 
 | 		return false; | 
 |  | 
 | 	if (!consume) { | 
 | 		struct skb_shared_hwtstamps *shwt; | 
 |  | 
 | 		rx->skb = skb_copy(skb, GFP_ATOMIC); | 
 | 		if (!rx->skb) { | 
 | 			if (net_ratelimit()) | 
 | 				wiphy_debug(local->hw.wiphy, | 
 | 					"failed to copy skb for %s\n", | 
 | 					sdata->name); | 
 | 			return true; | 
 | 		} | 
 |  | 
 | 		/* skb_copy() does not copy the hw timestamps, so copy it | 
 | 		 * explicitly | 
 | 		 */ | 
 | 		shwt = skb_hwtstamps(rx->skb); | 
 | 		shwt->hwtstamp = skb_hwtstamps(skb)->hwtstamp; | 
 |  | 
 | 		/* Update the hdr pointer to the new skb for translation below */ | 
 | 		hdr = (struct ieee80211_hdr *)rx->skb->data; | 
 | 	} | 
 |  | 
 | 	if (unlikely(rx->sta && rx->sta->sta.mlo) && | 
 | 	    is_unicast_ether_addr(hdr->addr1) && | 
 | 	    !ieee80211_is_probe_resp(hdr->frame_control) && | 
 | 	    !ieee80211_is_beacon(hdr->frame_control)) { | 
 | 		/* translate to MLD addresses */ | 
 | 		if (ether_addr_equal(link->conf->addr, hdr->addr1)) | 
 | 			ether_addr_copy(hdr->addr1, rx->sdata->vif.addr); | 
 | 		if (ether_addr_equal(link_sta->addr, hdr->addr2)) | 
 | 			ether_addr_copy(hdr->addr2, rx->sta->addr); | 
 | 		/* translate A3 only if it's the BSSID */ | 
 | 		if (!ieee80211_has_tods(hdr->frame_control) && | 
 | 		    !ieee80211_has_fromds(hdr->frame_control)) { | 
 | 			if (ether_addr_equal(link_sta->addr, hdr->addr3)) | 
 | 				ether_addr_copy(hdr->addr3, rx->sta->addr); | 
 | 			else if (ether_addr_equal(link->conf->addr, hdr->addr3)) | 
 | 				ether_addr_copy(hdr->addr3, rx->sdata->vif.addr); | 
 | 		} | 
 | 		/* not needed for A4 since it can only carry the SA */ | 
 | 	} | 
 |  | 
 | 	ieee80211_invoke_rx_handlers(rx); | 
 | 	return true; | 
 | } | 
 |  | 
 | static void __ieee80211_rx_handle_8023(struct ieee80211_hw *hw, | 
 | 				       struct ieee80211_sta *pubsta, | 
 | 				       struct sk_buff *skb, | 
 | 				       struct list_head *list) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_fast_rx *fast_rx; | 
 | 	struct ieee80211_rx_data rx; | 
 | 	struct sta_info *sta; | 
 | 	int link_id = -1; | 
 |  | 
 | 	memset(&rx, 0, sizeof(rx)); | 
 | 	rx.skb = skb; | 
 | 	rx.local = local; | 
 | 	rx.list = list; | 
 | 	rx.link_id = -1; | 
 |  | 
 | 	I802_DEBUG_INC(local->dot11ReceivedFragmentCount); | 
 |  | 
 | 	/* drop frame if too short for header */ | 
 | 	if (skb->len < sizeof(struct ethhdr)) | 
 | 		goto drop; | 
 |  | 
 | 	if (!pubsta) | 
 | 		goto drop; | 
 |  | 
 | 	if (status->link_valid) | 
 | 		link_id = status->link_id; | 
 |  | 
 | 	/* | 
 | 	 * TODO: Should the frame be dropped if the right link_id is not | 
 | 	 * available? Or may be it is fine in the current form to proceed with | 
 | 	 * the frame processing because with frame being in 802.3 format, | 
 | 	 * link_id is used only for stats purpose and updating the stats on | 
 | 	 * the deflink is fine? | 
 | 	 */ | 
 | 	sta = container_of(pubsta, struct sta_info, sta); | 
 | 	if (!ieee80211_rx_data_set_sta(&rx, sta, link_id)) | 
 | 		goto drop; | 
 |  | 
 | 	fast_rx = rcu_dereference(rx.sta->fast_rx); | 
 | 	if (!fast_rx) | 
 | 		goto drop; | 
 |  | 
 | 	ieee80211_rx_8023(&rx, fast_rx, skb->len); | 
 | 	return; | 
 |  | 
 | drop: | 
 | 	dev_kfree_skb(skb); | 
 | } | 
 |  | 
 | static bool ieee80211_rx_for_interface(struct ieee80211_rx_data *rx, | 
 | 				       struct sk_buff *skb, bool consume) | 
 | { | 
 | 	struct link_sta_info *link_sta; | 
 | 	struct ieee80211_hdr *hdr = (void *)skb->data; | 
 | 	struct sta_info *sta; | 
 | 	int link_id = -1; | 
 |  | 
 | 	/* | 
 | 	 * Look up link station first, in case there's a | 
 | 	 * chance that they might have a link address that | 
 | 	 * is identical to the MLD address, that way we'll | 
 | 	 * have the link information if needed. | 
 | 	 */ | 
 | 	link_sta = link_sta_info_get_bss(rx->sdata, hdr->addr2); | 
 | 	if (link_sta) { | 
 | 		sta = link_sta->sta; | 
 | 		link_id = link_sta->link_id; | 
 | 	} else { | 
 | 		struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 |  | 
 | 		sta = sta_info_get_bss(rx->sdata, hdr->addr2); | 
 | 		if (status->link_valid) { | 
 | 			link_id = status->link_id; | 
 | 		} else if (ieee80211_vif_is_mld(&rx->sdata->vif) && | 
 | 			   status->freq) { | 
 | 			struct ieee80211_link_data *link; | 
 | 			struct ieee80211_chanctx_conf *conf; | 
 |  | 
 | 			for_each_link_data_rcu(rx->sdata, link) { | 
 | 				conf = rcu_dereference(link->conf->chanctx_conf); | 
 | 				if (!conf || !conf->def.chan) | 
 | 					continue; | 
 |  | 
 | 				if (status->freq == conf->def.chan->center_freq) { | 
 | 					link_id = link->link_id; | 
 | 					break; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!ieee80211_rx_data_set_sta(rx, sta, link_id)) | 
 | 		return false; | 
 |  | 
 | 	return ieee80211_prepare_and_rx_handle(rx, skb, consume); | 
 | } | 
 |  | 
 | /* | 
 |  * This is the actual Rx frames handler. as it belongs to Rx path it must | 
 |  * be called with rcu_read_lock protection. | 
 |  */ | 
 | static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, | 
 | 					 struct ieee80211_sta *pubsta, | 
 | 					 struct sk_buff *skb, | 
 | 					 struct list_head *list) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	__le16 fc; | 
 | 	struct ieee80211_rx_data rx; | 
 | 	struct ieee80211_sub_if_data *prev; | 
 | 	struct rhlist_head *tmp; | 
 | 	int err = 0; | 
 |  | 
 | 	fc = ((struct ieee80211_hdr *)skb->data)->frame_control; | 
 | 	memset(&rx, 0, sizeof(rx)); | 
 | 	rx.skb = skb; | 
 | 	rx.local = local; | 
 | 	rx.list = list; | 
 | 	rx.link_id = -1; | 
 |  | 
 | 	if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc)) | 
 | 		I802_DEBUG_INC(local->dot11ReceivedFragmentCount); | 
 |  | 
 | 	if (ieee80211_is_mgmt(fc)) { | 
 | 		/* drop frame if too short for header */ | 
 | 		if (skb->len < ieee80211_hdrlen(fc)) | 
 | 			err = -ENOBUFS; | 
 | 		else | 
 | 			err = skb_linearize(skb); | 
 | 	} else { | 
 | 		err = !pskb_may_pull(skb, ieee80211_hdrlen(fc)); | 
 | 	} | 
 |  | 
 | 	if (err) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	ieee80211_parse_qos(&rx); | 
 | 	ieee80211_verify_alignment(&rx); | 
 |  | 
 | 	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control) || | 
 | 		     ieee80211_is_beacon(hdr->frame_control) || | 
 | 		     ieee80211_is_s1g_beacon(hdr->frame_control))) | 
 | 		ieee80211_scan_rx(local, skb); | 
 |  | 
 | 	if (ieee80211_is_data(fc)) { | 
 | 		struct sta_info *sta, *prev_sta; | 
 | 		int link_id = -1; | 
 |  | 
 | 		if (status->link_valid) | 
 | 			link_id = status->link_id; | 
 |  | 
 | 		if (pubsta) { | 
 | 			sta = container_of(pubsta, struct sta_info, sta); | 
 | 			if (!ieee80211_rx_data_set_sta(&rx, sta, link_id)) | 
 | 				goto out; | 
 |  | 
 | 			/* | 
 | 			 * In MLO connection, fetch the link_id using addr2 | 
 | 			 * when the driver does not pass link_id in status. | 
 | 			 * When the address translation is already performed by | 
 | 			 * driver/hw, the valid link_id must be passed in | 
 | 			 * status. | 
 | 			 */ | 
 |  | 
 | 			if (!status->link_valid && pubsta->mlo) { | 
 | 				struct link_sta_info *link_sta; | 
 |  | 
 | 				link_sta = link_sta_info_get_bss(rx.sdata, | 
 | 								 hdr->addr2); | 
 | 				if (!link_sta) | 
 | 					goto out; | 
 |  | 
 | 				ieee80211_rx_data_set_link(&rx, link_sta->link_id); | 
 | 			} | 
 |  | 
 | 			if (ieee80211_prepare_and_rx_handle(&rx, skb, true)) | 
 | 				return; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		prev_sta = NULL; | 
 |  | 
 | 		for_each_sta_info(local, hdr->addr2, sta, tmp) { | 
 | 			if (!prev_sta) { | 
 | 				prev_sta = sta; | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			rx.sdata = prev_sta->sdata; | 
 | 			if (!status->link_valid && prev_sta->sta.mlo) { | 
 | 				struct link_sta_info *link_sta; | 
 |  | 
 | 				link_sta = link_sta_info_get_bss(rx.sdata, | 
 | 								 hdr->addr2); | 
 | 				if (!link_sta) | 
 | 					continue; | 
 |  | 
 | 				link_id = link_sta->link_id; | 
 | 			} | 
 |  | 
 | 			if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id)) | 
 | 				goto out; | 
 |  | 
 | 			ieee80211_prepare_and_rx_handle(&rx, skb, false); | 
 |  | 
 | 			prev_sta = sta; | 
 | 		} | 
 |  | 
 | 		if (prev_sta) { | 
 | 			rx.sdata = prev_sta->sdata; | 
 | 			if (!status->link_valid && prev_sta->sta.mlo) { | 
 | 				struct link_sta_info *link_sta; | 
 |  | 
 | 				link_sta = link_sta_info_get_bss(rx.sdata, | 
 | 								 hdr->addr2); | 
 | 				if (!link_sta) | 
 | 					goto out; | 
 |  | 
 | 				link_id = link_sta->link_id; | 
 | 			} | 
 |  | 
 | 			if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id)) | 
 | 				goto out; | 
 |  | 
 | 			if (ieee80211_prepare_and_rx_handle(&rx, skb, true)) | 
 | 				return; | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	prev = NULL; | 
 |  | 
 | 	list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
 | 		if (!ieee80211_sdata_running(sdata)) | 
 | 			continue; | 
 |  | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_MONITOR || | 
 | 		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * frame is destined for this interface, but if it's | 
 | 		 * not also for the previous one we handle that after | 
 | 		 * the loop to avoid copying the SKB once too much | 
 | 		 */ | 
 |  | 
 | 		if (!prev) { | 
 | 			prev = sdata; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		rx.sdata = prev; | 
 | 		ieee80211_rx_for_interface(&rx, skb, false); | 
 |  | 
 | 		prev = sdata; | 
 | 	} | 
 |  | 
 | 	if (prev) { | 
 | 		rx.sdata = prev; | 
 |  | 
 | 		if (ieee80211_rx_for_interface(&rx, skb, true)) | 
 | 			return; | 
 | 	} | 
 |  | 
 |  out: | 
 | 	dev_kfree_skb(skb); | 
 | } | 
 |  | 
 | /* | 
 |  * This is the receive path handler. It is called by a low level driver when an | 
 |  * 802.11 MPDU is received from the hardware. | 
 |  */ | 
 | void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, | 
 | 		       struct sk_buff *skb, struct list_head *list) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct ieee80211_rate *rate = NULL; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
 |  | 
 | 	WARN_ON_ONCE(softirq_count() == 0); | 
 |  | 
 | 	if (WARN_ON(status->band >= NUM_NL80211_BANDS)) | 
 | 		goto drop; | 
 |  | 
 | 	sband = local->hw.wiphy->bands[status->band]; | 
 | 	if (WARN_ON(!sband)) | 
 | 		goto drop; | 
 |  | 
 | 	/* | 
 | 	 * If we're suspending, it is possible although not too likely | 
 | 	 * that we'd be receiving frames after having already partially | 
 | 	 * quiesced the stack. We can't process such frames then since | 
 | 	 * that might, for example, cause stations to be added or other | 
 | 	 * driver callbacks be invoked. | 
 | 	 */ | 
 | 	if (unlikely(local->quiescing || local->suspended)) | 
 | 		goto drop; | 
 |  | 
 | 	/* We might be during a HW reconfig, prevent Rx for the same reason */ | 
 | 	if (unlikely(local->in_reconfig)) | 
 | 		goto drop; | 
 |  | 
 | 	/* | 
 | 	 * The same happens when we're not even started, | 
 | 	 * but that's worth a warning. | 
 | 	 */ | 
 | 	if (WARN_ON(!local->started)) | 
 | 		goto drop; | 
 |  | 
 | 	if (likely(!(status->flag & RX_FLAG_FAILED_PLCP_CRC))) { | 
 | 		/* | 
 | 		 * Validate the rate, unless a PLCP error means that | 
 | 		 * we probably can't have a valid rate here anyway. | 
 | 		 */ | 
 |  | 
 | 		switch (status->encoding) { | 
 | 		case RX_ENC_HT: | 
 | 			/* | 
 | 			 * rate_idx is MCS index, which can be [0-76] | 
 | 			 * as documented on: | 
 | 			 * | 
 | 			 * https://wireless.wiki.kernel.org/en/developers/Documentation/ieee80211/802.11n | 
 | 			 * | 
 | 			 * Anything else would be some sort of driver or | 
 | 			 * hardware error. The driver should catch hardware | 
 | 			 * errors. | 
 | 			 */ | 
 | 			if (WARN(status->rate_idx > 76, | 
 | 				 "Rate marked as an HT rate but passed " | 
 | 				 "status->rate_idx is not " | 
 | 				 "an MCS index [0-76]: %d (0x%02x)\n", | 
 | 				 status->rate_idx, | 
 | 				 status->rate_idx)) | 
 | 				goto drop; | 
 | 			break; | 
 | 		case RX_ENC_VHT: | 
 | 			if (WARN_ONCE(status->rate_idx > 11 || | 
 | 				      !status->nss || | 
 | 				      status->nss > 8, | 
 | 				      "Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n", | 
 | 				      status->rate_idx, status->nss)) | 
 | 				goto drop; | 
 | 			break; | 
 | 		case RX_ENC_HE: | 
 | 			if (WARN_ONCE(status->rate_idx > 11 || | 
 | 				      !status->nss || | 
 | 				      status->nss > 8, | 
 | 				      "Rate marked as an HE rate but data is invalid: MCS: %d, NSS: %d\n", | 
 | 				      status->rate_idx, status->nss)) | 
 | 				goto drop; | 
 | 			break; | 
 | 		case RX_ENC_EHT: | 
 | 			if (WARN_ONCE(status->rate_idx > 15 || | 
 | 				      !status->nss || | 
 | 				      status->nss > 8 || | 
 | 				      status->eht.gi > NL80211_RATE_INFO_EHT_GI_3_2, | 
 | 				      "Rate marked as an EHT rate but data is invalid: MCS:%d, NSS:%d, GI:%d\n", | 
 | 				      status->rate_idx, status->nss, status->eht.gi)) | 
 | 				goto drop; | 
 | 			break; | 
 | 		default: | 
 | 			WARN_ON_ONCE(1); | 
 | 			fallthrough; | 
 | 		case RX_ENC_LEGACY: | 
 | 			if (WARN_ON(status->rate_idx >= sband->n_bitrates)) | 
 | 				goto drop; | 
 | 			rate = &sband->bitrates[status->rate_idx]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (WARN_ON_ONCE(status->link_id >= IEEE80211_LINK_UNSPECIFIED)) | 
 | 		goto drop; | 
 |  | 
 | 	status->rx_flags = 0; | 
 |  | 
 | 	kcov_remote_start_common(skb_get_kcov_handle(skb)); | 
 |  | 
 | 	/* | 
 | 	 * Frames with failed FCS/PLCP checksum are not returned, | 
 | 	 * all other frames are returned without radiotap header | 
 | 	 * if it was previously present. | 
 | 	 * Also, frames with less than 16 bytes are dropped. | 
 | 	 */ | 
 | 	if (!(status->flag & RX_FLAG_8023)) | 
 | 		skb = ieee80211_rx_monitor(local, skb, rate); | 
 | 	if (skb) { | 
 | 		if ((status->flag & RX_FLAG_8023) || | 
 | 			ieee80211_is_data_present(hdr->frame_control)) | 
 | 			ieee80211_tpt_led_trig_rx(local, skb->len); | 
 |  | 
 | 		if (status->flag & RX_FLAG_8023) | 
 | 			__ieee80211_rx_handle_8023(hw, pubsta, skb, list); | 
 | 		else | 
 | 			__ieee80211_rx_handle_packet(hw, pubsta, skb, list); | 
 | 	} | 
 |  | 
 | 	kcov_remote_stop(); | 
 | 	return; | 
 |  drop: | 
 | 	kfree_skb(skb); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rx_list); | 
 |  | 
 | void ieee80211_rx_napi(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, | 
 | 		       struct sk_buff *skb, struct napi_struct *napi) | 
 | { | 
 | 	struct sk_buff *tmp; | 
 | 	LIST_HEAD(list); | 
 |  | 
 |  | 
 | 	/* | 
 | 	 * key references and virtual interfaces are protected using RCU | 
 | 	 * and this requires that we are in a read-side RCU section during | 
 | 	 * receive processing | 
 | 	 */ | 
 | 	rcu_read_lock(); | 
 | 	ieee80211_rx_list(hw, pubsta, skb, &list); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (!napi) { | 
 | 		netif_receive_skb_list(&list); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry_safe(skb, tmp, &list, list) { | 
 | 		skb_list_del_init(skb); | 
 | 		napi_gro_receive(napi, skb); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rx_napi); | 
 |  | 
 | /* This is a version of the rx handler that can be called from hard irq | 
 |  * context. Post the skb on the queue and schedule the tasklet */ | 
 | void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb)); | 
 |  | 
 | 	skb->pkt_type = IEEE80211_RX_MSG; | 
 | 	skb_queue_tail(&local->skb_queue, skb); | 
 | 	tasklet_schedule(&local->tasklet); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rx_irqsafe); |