|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright (C) 2018-2025 Intel Corporation | 
|  | * | 
|  | * Transmit and frame generation functions. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/bitmap.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/export.h> | 
|  | #include <net/net_namespace.h> | 
|  | #include <net/ieee80211_radiotap.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/codel.h> | 
|  | #include <net/codel_impl.h> | 
|  | #include <linux/unaligned.h> | 
|  | #include <net/fq_impl.h> | 
|  | #include <net/sock.h> | 
|  | #include <net/gso.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "driver-ops.h" | 
|  | #include "led.h" | 
|  | #include "mesh.h" | 
|  | #include "wep.h" | 
|  | #include "wpa.h" | 
|  | #include "wme.h" | 
|  | #include "rate.h" | 
|  |  | 
|  | /* misc utils */ | 
|  |  | 
|  | static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, | 
|  | struct sk_buff *skb, int group_addr, | 
|  | int next_frag_len) | 
|  | { | 
|  | int rate, mrate, erp, dur, i; | 
|  | struct ieee80211_rate *txrate; | 
|  | struct ieee80211_local *local = tx->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | /* assume HW handles this */ | 
|  | if (tx->rate.flags & (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)) | 
|  | return 0; | 
|  |  | 
|  | /* uh huh? */ | 
|  | if (WARN_ON_ONCE(tx->rate.idx < 0)) | 
|  | return 0; | 
|  |  | 
|  | if (info->band >= NUM_NL80211_BANDS) | 
|  | return 0; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[info->band]; | 
|  | txrate = &sband->bitrates[tx->rate.idx]; | 
|  |  | 
|  | erp = txrate->flags & IEEE80211_RATE_ERP_G; | 
|  |  | 
|  | /* device is expected to do this */ | 
|  | if (sband->band == NL80211_BAND_S1GHZ) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * data and mgmt (except PS Poll): | 
|  | * - during CFP: 32768 | 
|  | * - during contention period: | 
|  | *   if addr1 is group address: 0 | 
|  | *   if more fragments = 0 and addr1 is individual address: time to | 
|  | *      transmit one ACK plus SIFS | 
|  | *   if more fragments = 1 and addr1 is individual address: time to | 
|  | *      transmit next fragment plus 2 x ACK plus 3 x SIFS | 
|  | * | 
|  | * IEEE 802.11, 9.6: | 
|  | * - control response frame (CTS or ACK) shall be transmitted using the | 
|  | *   same rate as the immediately previous frame in the frame exchange | 
|  | *   sequence, if this rate belongs to the PHY mandatory rates, or else | 
|  | *   at the highest possible rate belonging to the PHY rates in the | 
|  | *   BSSBasicRateSet | 
|  | */ | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | if (ieee80211_is_ctl(hdr->frame_control)) { | 
|  | /* TODO: These control frames are not currently sent by | 
|  | * mac80211, but should they be implemented, this function | 
|  | * needs to be updated to support duration field calculation. | 
|  | * | 
|  | * RTS: time needed to transmit pending data/mgmt frame plus | 
|  | *    one CTS frame plus one ACK frame plus 3 x SIFS | 
|  | * CTS: duration of immediately previous RTS minus time | 
|  | *    required to transmit CTS and its SIFS | 
|  | * ACK: 0 if immediately previous directed data/mgmt had | 
|  | *    more=0, with more=1 duration in ACK frame is duration | 
|  | *    from previous frame minus time needed to transmit ACK | 
|  | *    and its SIFS | 
|  | * PS Poll: BIT(15) | BIT(14) | aid | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* data/mgmt */ | 
|  | if (0 /* FIX: data/mgmt during CFP */) | 
|  | return cpu_to_le16(32768); | 
|  |  | 
|  | if (group_addr) /* Group address as the destination - no ACK */ | 
|  | return 0; | 
|  |  | 
|  | /* Individual destination address: | 
|  | * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | 
|  | * CTS and ACK frames shall be transmitted using the highest rate in | 
|  | * basic rate set that is less than or equal to the rate of the | 
|  | * immediately previous frame and that is using the same modulation | 
|  | * (CCK or OFDM). If no basic rate set matches with these requirements, | 
|  | * the highest mandatory rate of the PHY that is less than or equal to | 
|  | * the rate of the previous frame is used. | 
|  | * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | 
|  | */ | 
|  | rate = -1; | 
|  | /* use lowest available if everything fails */ | 
|  | mrate = sband->bitrates[0].bitrate; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | struct ieee80211_rate *r = &sband->bitrates[i]; | 
|  | u32 flag; | 
|  |  | 
|  | if (r->bitrate > txrate->bitrate) | 
|  | break; | 
|  |  | 
|  | if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) | 
|  | rate = r->bitrate; | 
|  |  | 
|  | switch (sband->band) { | 
|  | case NL80211_BAND_2GHZ: | 
|  | case NL80211_BAND_LC: | 
|  | if (tx->sdata->deflink.operating_11g_mode) | 
|  | flag = IEEE80211_RATE_MANDATORY_G; | 
|  | else | 
|  | flag = IEEE80211_RATE_MANDATORY_B; | 
|  | break; | 
|  | case NL80211_BAND_5GHZ: | 
|  | case NL80211_BAND_6GHZ: | 
|  | flag = IEEE80211_RATE_MANDATORY_A; | 
|  | break; | 
|  | default: | 
|  | flag = 0; | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (r->flags & flag) | 
|  | mrate = r->bitrate; | 
|  | } | 
|  | if (rate == -1) { | 
|  | /* No matching basic rate found; use highest suitable mandatory | 
|  | * PHY rate */ | 
|  | rate = mrate; | 
|  | } | 
|  |  | 
|  | /* Don't calculate ACKs for QoS Frames with NoAck Policy set */ | 
|  | if (ieee80211_is_data_qos(hdr->frame_control) && | 
|  | *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) | 
|  | dur = 0; | 
|  | else | 
|  | /* Time needed to transmit ACK | 
|  | * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | 
|  | * to closest integer */ | 
|  | dur = ieee80211_frame_duration(sband->band, 10, rate, erp, | 
|  | tx->sdata->vif.bss_conf.use_short_preamble); | 
|  |  | 
|  | if (next_frag_len) { | 
|  | /* Frame is fragmented: duration increases with time needed to | 
|  | * transmit next fragment plus ACK and 2 x SIFS. */ | 
|  | dur *= 2; /* ACK + SIFS */ | 
|  | /* next fragment */ | 
|  | dur += ieee80211_frame_duration(sband->band, next_frag_len, | 
|  | txrate->bitrate, erp, | 
|  | tx->sdata->vif.bss_conf.use_short_preamble); | 
|  | } | 
|  |  | 
|  | return cpu_to_le16(dur); | 
|  | } | 
|  |  | 
|  | /* tx handlers */ | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_local *local = tx->local; | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  |  | 
|  | /* driver doesn't support power save */ | 
|  | if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* hardware does dynamic power save */ | 
|  | if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* dynamic power save disabled */ | 
|  | if (local->hw.conf.dynamic_ps_timeout <= 0) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* we are scanning, don't enable power save */ | 
|  | if (local->scanning) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (!local->ps_sdata) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* No point if we're going to suspend */ | 
|  | if (local->quiescing) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* dynamic ps is supported only in managed mode */ | 
|  | if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | ifmgd = &tx->sdata->u.mgd; | 
|  |  | 
|  | /* | 
|  | * Don't wakeup from power save if u-apsd is enabled, voip ac has | 
|  | * u-apsd enabled and the frame is in voip class. This effectively | 
|  | * means that even if all access categories have u-apsd enabled, in | 
|  | * practise u-apsd is only used with the voip ac. This is a | 
|  | * workaround for the case when received voip class packets do not | 
|  | * have correct qos tag for some reason, due the network or the | 
|  | * peer application. | 
|  | * | 
|  | * Note: ifmgd->uapsd_queues access is racy here. If the value is | 
|  | * changed via debugfs, user needs to reassociate manually to have | 
|  | * everything in sync. | 
|  | */ | 
|  | if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && | 
|  | (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && | 
|  | skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | ieee80211_stop_queues_by_reason(&local->hw, | 
|  | IEEE80211_MAX_QUEUE_MAP, | 
|  | IEEE80211_QUEUE_STOP_REASON_PS, | 
|  | false); | 
|  | ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; | 
|  | wiphy_work_queue(local->hw.wiphy, | 
|  | &local->dynamic_ps_disable_work); | 
|  | } | 
|  |  | 
|  | /* Don't restart the timer if we're not disassociated */ | 
|  | if (!ifmgd->associated) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) | 
|  | { | 
|  |  | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | bool assoc = false; | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && | 
|  | test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && | 
|  | !ieee80211_is_probe_req(hdr->frame_control) && | 
|  | !ieee80211_is_any_nullfunc(hdr->frame_control)) | 
|  | /* | 
|  | * When software scanning only nullfunc frames (to notify | 
|  | * the sleep state to the AP) and probe requests (for the | 
|  | * active scan) are allowed, all other frames should not be | 
|  | * sent and we should not get here, but if we do | 
|  | * nonetheless, drop them to avoid sending them | 
|  | * off-channel. See the link below and | 
|  | * ieee80211_start_scan() for more. | 
|  | * | 
|  | * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089 | 
|  | */ | 
|  | return TX_DROP; | 
|  |  | 
|  | if (tx->sdata->vif.type == NL80211_IFTYPE_OCB) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (tx->flags & IEEE80211_TX_PS_BUFFERED) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (tx->sta) | 
|  | assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | 
|  |  | 
|  | if (likely(tx->flags & IEEE80211_TX_UNICAST)) { | 
|  | if (unlikely(!assoc && | 
|  | ieee80211_is_data(hdr->frame_control))) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | sdata_info(tx->sdata, | 
|  | "dropped data frame to not associated station %pM\n", | 
|  | hdr->addr1); | 
|  | #endif | 
|  | I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | 
|  | return TX_DROP; | 
|  | } | 
|  | } else if (unlikely(ieee80211_is_data(hdr->frame_control) && | 
|  | ieee80211_vif_get_num_mcast_if(tx->sdata) == 0)) { | 
|  | /* | 
|  | * No associated STAs - no need to send multicast | 
|  | * frames. | 
|  | */ | 
|  | return TX_DROP; | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* This function is called whenever the AP is about to exceed the maximum limit | 
|  | * of buffered frames for power saving STAs. This situation should not really | 
|  | * happen often during normal operation, so dropping the oldest buffered packet | 
|  | * from each queue should be OK to make some room for new frames. */ | 
|  | static void purge_old_ps_buffers(struct ieee80211_local *local) | 
|  | { | 
|  | int total = 0, purged = 0; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | struct ps_data *ps; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | ps = &sdata->u.ap.ps; | 
|  | else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | ps = &sdata->u.mesh.ps; | 
|  | else | 
|  | continue; | 
|  |  | 
|  | skb = skb_dequeue(&ps->bc_buf); | 
|  | if (skb) { | 
|  | purged++; | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | } | 
|  | total += skb_queue_len(&ps->bc_buf); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Drop one frame from each station from the lowest-priority | 
|  | * AC that has frames at all. | 
|  | */ | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
|  | int ac; | 
|  |  | 
|  | for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { | 
|  | skb = skb_dequeue(&sta->ps_tx_buf[ac]); | 
|  | total += skb_queue_len(&sta->ps_tx_buf[ac]); | 
|  | if (skb) { | 
|  | purged++; | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | local->total_ps_buffered = total; | 
|  | ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged); | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result | 
|  | ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  | struct ps_data *ps; | 
|  |  | 
|  | /* | 
|  | * broadcast/multicast frame | 
|  | * | 
|  | * If any of the associated/peer stations is in power save mode, | 
|  | * the frame is buffered to be sent after DTIM beacon frame. | 
|  | * This is done either by the hardware or us. | 
|  | */ | 
|  |  | 
|  | /* powersaving STAs currently only in AP/VLAN/mesh mode */ | 
|  | if (tx->sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
|  | if (!tx->sdata->bss) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | ps = &tx->sdata->bss->ps; | 
|  | } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { | 
|  | ps = &tx->sdata->u.mesh.ps; | 
|  | } else { | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* no buffering for ordered frames */ | 
|  | if (ieee80211_has_order(hdr->frame_control)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_is_probe_req(hdr->frame_control)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL)) | 
|  | info->hw_queue = tx->sdata->vif.cab_queue; | 
|  |  | 
|  | /* no stations in PS mode and no buffered packets */ | 
|  | if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; | 
|  |  | 
|  | /* device releases frame after DTIM beacon */ | 
|  | if (!ieee80211_hw_check(&tx->local->hw, HOST_BROADCAST_PS_BUFFERING)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* buffered in mac80211 */ | 
|  | if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
|  | purge_old_ps_buffers(tx->local); | 
|  |  | 
|  | if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { | 
|  | ps_dbg(tx->sdata, | 
|  | "BC TX buffer full - dropping the oldest frame\n"); | 
|  | ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); | 
|  | } else | 
|  | tx->local->total_ps_buffered++; | 
|  |  | 
|  | skb_queue_tail(&ps->bc_buf, tx->skb); | 
|  |  | 
|  | return TX_QUEUED; | 
|  | } | 
|  |  | 
|  | static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | if (!ieee80211_is_mgmt(fc)) | 
|  | return 0; | 
|  |  | 
|  | if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) | 
|  | return 0; | 
|  |  | 
|  | if (!ieee80211_is_robust_mgmt_frame(skb)) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result | 
|  | ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct sta_info *sta = tx->sta; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  | struct ieee80211_local *local = tx->local; | 
|  |  | 
|  | if (unlikely(!sta)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || | 
|  | test_sta_flag(sta, WLAN_STA_PS_DRIVER) || | 
|  | test_sta_flag(sta, WLAN_STA_PS_DELIVER)) && | 
|  | !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { | 
|  | int ac = skb_get_queue_mapping(tx->skb); | 
|  |  | 
|  | if (ieee80211_is_mgmt(hdr->frame_control) && | 
|  | !ieee80211_is_bufferable_mmpdu(tx->skb)) { | 
|  | info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", | 
|  | sta->sta.addr, sta->sta.aid, ac); | 
|  | if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
|  | purge_old_ps_buffers(tx->local); | 
|  |  | 
|  | /* sync with ieee80211_sta_ps_deliver_wakeup */ | 
|  | spin_lock(&sta->ps_lock); | 
|  | /* | 
|  | * STA woke up the meantime and all the frames on ps_tx_buf have | 
|  | * been queued to pending queue. No reordering can happen, go | 
|  | * ahead and Tx the packet. | 
|  | */ | 
|  | if (!test_sta_flag(sta, WLAN_STA_PS_STA) && | 
|  | !test_sta_flag(sta, WLAN_STA_PS_DRIVER) && | 
|  | !test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { | 
|  | spin_unlock(&sta->ps_lock); | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { | 
|  | struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]); | 
|  | ps_dbg(tx->sdata, | 
|  | "STA %pM TX buffer for AC %d full - dropping oldest frame\n", | 
|  | sta->sta.addr, ac); | 
|  | ieee80211_free_txskb(&local->hw, old); | 
|  | } else | 
|  | tx->local->total_ps_buffered++; | 
|  |  | 
|  | info->control.jiffies = jiffies; | 
|  | info->control.vif = &tx->sdata->vif; | 
|  | info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
|  | info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; | 
|  | skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb); | 
|  | spin_unlock(&sta->ps_lock); | 
|  |  | 
|  | if (!timer_pending(&local->sta_cleanup)) | 
|  | mod_timer(&local->sta_cleanup, | 
|  | round_jiffies(jiffies + | 
|  | STA_INFO_CLEANUP_INTERVAL)); | 
|  |  | 
|  | /* | 
|  | * We queued up some frames, so the TIM bit might | 
|  | * need to be set, recalculate it. | 
|  | */ | 
|  | sta_info_recalc_tim(sta); | 
|  |  | 
|  | return TX_QUEUED; | 
|  | } else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) { | 
|  | ps_dbg(tx->sdata, | 
|  | "STA %pM in PS mode, but polling/in SP -> send frame\n", | 
|  | sta->sta.addr); | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (tx->flags & IEEE80211_TX_UNICAST) | 
|  | return ieee80211_tx_h_unicast_ps_buf(tx); | 
|  | else | 
|  | return ieee80211_tx_h_multicast_ps_buf(tx); | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  |  | 
|  | if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) { | 
|  | if (tx->sdata->control_port_no_encrypt) | 
|  | info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | info->control.flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO; | 
|  | info->flags |= IEEE80211_TX_CTL_USE_MINRATE; | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static struct ieee80211_key * | 
|  | ieee80211_select_link_key(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_link_data *link; | 
|  | unsigned int link_id; | 
|  |  | 
|  | link_id = u32_get_bits(info->control.flags, IEEE80211_TX_CTRL_MLO_LINK); | 
|  | if (link_id == IEEE80211_LINK_UNSPECIFIED) { | 
|  | link = &tx->sdata->deflink; | 
|  | } else { | 
|  | link = rcu_dereference(tx->sdata->link[link_id]); | 
|  | if (!link) | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_group_privacy_action(tx->skb)) | 
|  | return rcu_dereference(link->default_multicast_key); | 
|  | else if (ieee80211_is_mgmt(hdr->frame_control) && | 
|  | is_multicast_ether_addr(hdr->addr1) && | 
|  | ieee80211_is_robust_mgmt_frame(tx->skb)) | 
|  | return rcu_dereference(link->default_mgmt_key); | 
|  | else if (is_multicast_ether_addr(hdr->addr1)) | 
|  | return rcu_dereference(link->default_multicast_key); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_key *key; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) { | 
|  | tx->key = NULL; | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | if (tx->sta && | 
|  | (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx]))) | 
|  | tx->key = key; | 
|  | else if ((key = ieee80211_select_link_key(tx))) | 
|  | tx->key = key; | 
|  | else if (!is_multicast_ether_addr(hdr->addr1) && | 
|  | (key = rcu_dereference(tx->sdata->default_unicast_key))) | 
|  | tx->key = key; | 
|  | else | 
|  | tx->key = NULL; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) { | 
|  | if (tx->key && tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
|  | info->control.hw_key = &tx->key->conf; | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | if (tx->key) { | 
|  | bool skip_hw = false; | 
|  |  | 
|  | /* TODO: add threshold stuff again */ | 
|  |  | 
|  | switch (tx->key->conf.cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | if (!ieee80211_is_data_present(hdr->frame_control)) | 
|  | tx->key = NULL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | if (!ieee80211_is_data_present(hdr->frame_control) && | 
|  | !ieee80211_use_mfp(hdr->frame_control, tx->sta, | 
|  | tx->skb) && | 
|  | !ieee80211_is_group_privacy_action(tx->skb)) | 
|  | tx->key = NULL; | 
|  | else | 
|  | skip_hw = (tx->key->conf.flags & | 
|  | IEEE80211_KEY_FLAG_SW_MGMT_TX) && | 
|  | ieee80211_is_mgmt(hdr->frame_control); | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | if (!ieee80211_is_mgmt(hdr->frame_control)) | 
|  | tx->key = NULL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && | 
|  | !ieee80211_is_deauth(hdr->frame_control)) && | 
|  | tx->skb->protocol != tx->sdata->control_port_protocol) | 
|  | return TX_DROP; | 
|  |  | 
|  | if (!skip_hw && tx->key && | 
|  | tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
|  | info->control.hw_key = &tx->key->conf; | 
|  | } else if (ieee80211_is_data_present(hdr->frame_control) && tx->sta && | 
|  | test_sta_flag(tx->sta, WLAN_STA_USES_ENCRYPTION)) { | 
|  | return TX_DROP; | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_hdr *hdr = (void *)tx->skb->data; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u32 len; | 
|  | struct ieee80211_tx_rate_control txrc; | 
|  | struct ieee80211_sta_rates *ratetbl = NULL; | 
|  | bool encap = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP; | 
|  | bool assoc = false; | 
|  |  | 
|  | memset(&txrc, 0, sizeof(txrc)); | 
|  |  | 
|  | if (info->band < NUM_NL80211_BANDS) | 
|  | sband = tx->local->hw.wiphy->bands[info->band]; | 
|  | else | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | len = min_t(u32, tx->skb->len + FCS_LEN, | 
|  | tx->local->hw.wiphy->frag_threshold); | 
|  |  | 
|  | /* set up the tx rate control struct we give the RC algo */ | 
|  | txrc.hw = &tx->local->hw; | 
|  | txrc.sband = sband; | 
|  | txrc.bss_conf = &tx->sdata->vif.bss_conf; | 
|  | txrc.skb = tx->skb; | 
|  | txrc.reported_rate.idx = -1; | 
|  |  | 
|  | if (unlikely(info->control.flags & IEEE80211_TX_CTRL_DONT_USE_RATE_MASK)) { | 
|  | txrc.rate_idx_mask = ~0; | 
|  | } else { | 
|  | txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; | 
|  |  | 
|  | if (tx->sdata->rc_has_mcs_mask[info->band]) | 
|  | txrc.rate_idx_mcs_mask = | 
|  | tx->sdata->rc_rateidx_mcs_mask[info->band]; | 
|  | } | 
|  |  | 
|  | txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || | 
|  | tx->sdata->vif.type == NL80211_IFTYPE_ADHOC || | 
|  | tx->sdata->vif.type == NL80211_IFTYPE_OCB); | 
|  |  | 
|  | /* set up RTS protection if desired */ | 
|  | if (len > tx->local->hw.wiphy->rts_threshold) { | 
|  | txrc.rts = true; | 
|  | } | 
|  |  | 
|  | info->control.use_rts = txrc.rts; | 
|  | info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; | 
|  |  | 
|  | /* | 
|  | * Use short preamble if the BSS can handle it, but not for | 
|  | * management frames unless we know the receiver can handle | 
|  | * that -- the management frame might be to a station that | 
|  | * just wants a probe response. | 
|  | */ | 
|  | if (tx->sdata->vif.bss_conf.use_short_preamble && | 
|  | (ieee80211_is_tx_data(tx->skb) || | 
|  | (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) | 
|  | txrc.short_preamble = true; | 
|  |  | 
|  | info->control.short_preamble = txrc.short_preamble; | 
|  |  | 
|  | /* don't ask rate control when rate already injected via radiotap */ | 
|  | if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (tx->sta) | 
|  | assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | 
|  |  | 
|  | /* | 
|  | * Lets not bother rate control if we're associated and cannot | 
|  | * talk to the sta. This should not happen. | 
|  | */ | 
|  | if (WARN(test_bit(SCAN_SW_SCANNING, &tx->local->scanning) && assoc && | 
|  | !rate_usable_index_exists(sband, &tx->sta->sta), | 
|  | "%s: Dropped data frame as no usable bitrate found while " | 
|  | "scanning and associated. Target station: " | 
|  | "%pM on %d GHz band\n", | 
|  | tx->sdata->name, | 
|  | encap ? ((struct ethhdr *)hdr)->h_dest : hdr->addr1, | 
|  | info->band ? 5 : 2)) | 
|  | return TX_DROP; | 
|  |  | 
|  | /* | 
|  | * If we're associated with the sta at this point we know we can at | 
|  | * least send the frame at the lowest bit rate. | 
|  | */ | 
|  | rate_control_get_rate(tx->sdata, tx->sta, &txrc); | 
|  |  | 
|  | if (tx->sta && !info->control.skip_table) | 
|  | ratetbl = rcu_dereference(tx->sta->sta.rates); | 
|  |  | 
|  | if (unlikely(info->control.rates[0].idx < 0)) { | 
|  | if (ratetbl) { | 
|  | struct ieee80211_tx_rate rate = { | 
|  | .idx = ratetbl->rate[0].idx, | 
|  | .flags = ratetbl->rate[0].flags, | 
|  | .count = ratetbl->rate[0].count | 
|  | }; | 
|  |  | 
|  | if (ratetbl->rate[0].idx < 0) | 
|  | return TX_DROP; | 
|  |  | 
|  | tx->rate = rate; | 
|  | } else { | 
|  | return TX_DROP; | 
|  | } | 
|  | } else { | 
|  | tx->rate = info->control.rates[0]; | 
|  | } | 
|  |  | 
|  | if (txrc.reported_rate.idx < 0) { | 
|  | txrc.reported_rate = tx->rate; | 
|  | if (tx->sta && ieee80211_is_tx_data(tx->skb)) | 
|  | tx->sta->deflink.tx_stats.last_rate = txrc.reported_rate; | 
|  | } else if (tx->sta) | 
|  | tx->sta->deflink.tx_stats.last_rate = txrc.reported_rate; | 
|  |  | 
|  | if (ratetbl) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (unlikely(!info->control.rates[0].count)) | 
|  | info->control.rates[0].count = 1; | 
|  |  | 
|  | if (WARN_ON_ONCE((info->control.rates[0].count > 1) && | 
|  | (info->flags & IEEE80211_TX_CTL_NO_ACK))) | 
|  | info->control.rates[0].count = 1; | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid) | 
|  | { | 
|  | u16 *seq = &sta->tid_seq[tid]; | 
|  | __le16 ret = cpu_to_le16(*seq); | 
|  |  | 
|  | /* Increase the sequence number. */ | 
|  | *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
|  | int tid; | 
|  |  | 
|  | /* | 
|  | * Packet injection may want to control the sequence | 
|  | * number, if we have no matching interface then we | 
|  | * neither assign one ourselves nor ask the driver to. | 
|  | */ | 
|  | if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (unlikely(ieee80211_is_ctl(hdr->frame_control))) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_hdrlen(hdr->frame_control) < 24) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_is_qos_nullfunc(hdr->frame_control)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (info->control.flags & IEEE80211_TX_CTRL_NO_SEQNO) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* SNS11 from 802.11be 10.3.2.14 */ | 
|  | if (unlikely(is_multicast_ether_addr(hdr->addr1) && | 
|  | ieee80211_vif_is_mld(info->control.vif) && | 
|  | info->control.vif->type == NL80211_IFTYPE_AP)) { | 
|  | if (info->control.flags & IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX) | 
|  | tx->sdata->mld_mcast_seq += 0x10; | 
|  | hdr->seq_ctrl = cpu_to_le16(tx->sdata->mld_mcast_seq); | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Anything but QoS data that has a sequence number field | 
|  | * (is long enough) gets a sequence number from the global | 
|  | * counter.  QoS data frames with a multicast destination | 
|  | * also use the global counter (802.11-2012 9.3.2.10). | 
|  | */ | 
|  | if (!ieee80211_is_data_qos(hdr->frame_control) || | 
|  | is_multicast_ether_addr(hdr->addr1)) { | 
|  | /* driver should assign sequence number */ | 
|  | info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | 
|  | /* for pure STA mode without beacons, we can do it */ | 
|  | hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number); | 
|  | tx->sdata->sequence_number += 0x10; | 
|  | if (tx->sta) | 
|  | tx->sta->deflink.tx_stats.msdu[IEEE80211_NUM_TIDS]++; | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This should be true for injected/management frames only, for | 
|  | * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ | 
|  | * above since they are not QoS-data frames. | 
|  | */ | 
|  | if (!tx->sta) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* include per-STA, per-TID sequence counter */ | 
|  | tid = ieee80211_get_tid(hdr); | 
|  | tx->sta->deflink.tx_stats.msdu[tid]++; | 
|  |  | 
|  | hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid); | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static int ieee80211_fragment(struct ieee80211_tx_data *tx, | 
|  | struct sk_buff *skb, int hdrlen, | 
|  | int frag_threshold) | 
|  | { | 
|  | struct ieee80211_local *local = tx->local; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct sk_buff *tmp; | 
|  | int per_fragm = frag_threshold - hdrlen - FCS_LEN; | 
|  | int pos = hdrlen + per_fragm; | 
|  | int rem = skb->len - hdrlen - per_fragm; | 
|  |  | 
|  | if (WARN_ON(rem < 0)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* first fragment was already added to queue by caller */ | 
|  |  | 
|  | while (rem) { | 
|  | int fraglen = per_fragm; | 
|  |  | 
|  | if (fraglen > rem) | 
|  | fraglen = rem; | 
|  | rem -= fraglen; | 
|  | tmp = dev_alloc_skb(local->tx_headroom + | 
|  | frag_threshold + | 
|  | IEEE80211_ENCRYPT_HEADROOM + | 
|  | IEEE80211_ENCRYPT_TAILROOM); | 
|  | if (!tmp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | __skb_queue_tail(&tx->skbs, tmp); | 
|  |  | 
|  | skb_reserve(tmp, | 
|  | local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); | 
|  |  | 
|  | /* copy control information */ | 
|  | memcpy(tmp->cb, skb->cb, sizeof(tmp->cb)); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(tmp); | 
|  | info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | | 
|  | IEEE80211_TX_CTL_FIRST_FRAGMENT); | 
|  |  | 
|  | if (rem) | 
|  | info->flags |= IEEE80211_TX_CTL_MORE_FRAMES; | 
|  |  | 
|  | skb_copy_queue_mapping(tmp, skb); | 
|  | tmp->priority = skb->priority; | 
|  | tmp->dev = skb->dev; | 
|  |  | 
|  | /* copy header and data */ | 
|  | skb_put_data(tmp, skb->data, hdrlen); | 
|  | skb_put_data(tmp, skb->data + pos, fraglen); | 
|  |  | 
|  | pos += fraglen; | 
|  | } | 
|  |  | 
|  | /* adjust first fragment's length */ | 
|  | skb_trim(skb, hdrlen + per_fragm); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct sk_buff *skb = tx->skb; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | int frag_threshold = tx->local->hw.wiphy->frag_threshold; | 
|  | int hdrlen; | 
|  | int fragnum; | 
|  |  | 
|  | /* no matter what happens, tx->skb moves to tx->skbs */ | 
|  | __skb_queue_tail(&tx->skbs, skb); | 
|  | tx->skb = NULL; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_DONTFRAG) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_hw_check(&tx->local->hw, SUPPORTS_TX_FRAG)) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | /* | 
|  | * Warn when submitting a fragmented A-MPDU frame and drop it. | 
|  | * This scenario is handled in ieee80211_tx_prepare but extra | 
|  | * caution taken here as fragmented ampdu may cause Tx stop. | 
|  | */ | 
|  | if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) | 
|  | return TX_DROP; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | /* internal error, why isn't DONTFRAG set? */ | 
|  | if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) | 
|  | return TX_DROP; | 
|  |  | 
|  | /* | 
|  | * Now fragment the frame. This will allocate all the fragments and | 
|  | * chain them (using skb as the first fragment) to skb->next. | 
|  | * During transmission, we will remove the successfully transmitted | 
|  | * fragments from this list. When the low-level driver rejects one | 
|  | * of the fragments then we will simply pretend to accept the skb | 
|  | * but store it away as pending. | 
|  | */ | 
|  | if (ieee80211_fragment(tx, skb, hdrlen, frag_threshold)) | 
|  | return TX_DROP; | 
|  |  | 
|  | /* update duration/seq/flags of fragments */ | 
|  | fragnum = 0; | 
|  |  | 
|  | skb_queue_walk(&tx->skbs, skb) { | 
|  | const __le16 morefrags = cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | 
|  |  | 
|  | hdr = (void *)skb->data; | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (!skb_queue_is_last(&tx->skbs, skb)) { | 
|  | hdr->frame_control |= morefrags; | 
|  | /* | 
|  | * No multi-rate retries for fragmented frames, that | 
|  | * would completely throw off the NAV at other STAs. | 
|  | */ | 
|  | info->control.rates[1].idx = -1; | 
|  | info->control.rates[2].idx = -1; | 
|  | info->control.rates[3].idx = -1; | 
|  | BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4); | 
|  | info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; | 
|  | } else { | 
|  | hdr->frame_control &= ~morefrags; | 
|  | } | 
|  | hdr->seq_ctrl |= cpu_to_le16(fragnum & IEEE80211_SCTL_FRAG); | 
|  | fragnum++; | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int ac = -1; | 
|  |  | 
|  | if (!tx->sta) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | skb_queue_walk(&tx->skbs, skb) { | 
|  | ac = skb_get_queue_mapping(skb); | 
|  | tx->sta->deflink.tx_stats.bytes[ac] += skb->len; | 
|  | } | 
|  | if (ac >= 0) | 
|  | tx->sta->deflink.tx_stats.packets[ac]++; | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | if (!tx->key) | 
|  | return TX_CONTINUE; | 
|  |  | 
|  | switch (tx->key->conf.cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | return ieee80211_crypto_wep_encrypt(tx); | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | return ieee80211_crypto_tkip_encrypt(tx); | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | return ieee80211_crypto_ccmp_encrypt( | 
|  | tx, IEEE80211_CCMP_MIC_LEN); | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | return ieee80211_crypto_ccmp_encrypt( | 
|  | tx, IEEE80211_CCMP_256_MIC_LEN); | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | return ieee80211_crypto_aes_cmac_encrypt(tx); | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | return ieee80211_crypto_aes_cmac_256_encrypt(tx); | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | return ieee80211_crypto_aes_gmac_encrypt(tx); | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | return ieee80211_crypto_gcmp_encrypt(tx); | 
|  | } | 
|  |  | 
|  | return TX_DROP; | 
|  | } | 
|  |  | 
|  | static ieee80211_tx_result debug_noinline | 
|  | ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr *hdr; | 
|  | int next_len; | 
|  | bool group_addr; | 
|  |  | 
|  | skb_queue_walk(&tx->skbs, skb) { | 
|  | hdr = (void *) skb->data; | 
|  | if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) | 
|  | break; /* must not overwrite AID */ | 
|  | if (!skb_queue_is_last(&tx->skbs, skb)) { | 
|  | struct sk_buff *next = skb_queue_next(&tx->skbs, skb); | 
|  | next_len = next->len; | 
|  | } else | 
|  | next_len = 0; | 
|  | group_addr = is_multicast_ether_addr(hdr->addr1); | 
|  |  | 
|  | hdr->duration_id = | 
|  | ieee80211_duration(tx, skb, group_addr, next_len); | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* actual transmit path */ | 
|  |  | 
|  | static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data *tx, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_tx_info *info, | 
|  | struct tid_ampdu_tx *tid_tx, | 
|  | int tid) | 
|  | { | 
|  | bool queued = false; | 
|  | bool reset_agg_timer = false; | 
|  | struct sk_buff *purge_skb = NULL; | 
|  |  | 
|  | if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | 
|  | reset_agg_timer = true; | 
|  | } else if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { | 
|  | /* | 
|  | * nothing -- this aggregation session is being started | 
|  | * but that might still fail with the driver | 
|  | */ | 
|  | } else if (!tx->sta->sta.txq[tid]) { | 
|  | spin_lock(&tx->sta->lock); | 
|  | /* | 
|  | * Need to re-check now, because we may get here | 
|  | * | 
|  | *  1) in the window during which the setup is actually | 
|  | *     already done, but not marked yet because not all | 
|  | *     packets are spliced over to the driver pending | 
|  | *     queue yet -- if this happened we acquire the lock | 
|  | *     either before or after the splice happens, but | 
|  | *     need to recheck which of these cases happened. | 
|  | * | 
|  | *  2) during session teardown, if the OPERATIONAL bit | 
|  | *     was cleared due to the teardown but the pointer | 
|  | *     hasn't been assigned NULL yet (or we loaded it | 
|  | *     before it was assigned) -- in this case it may | 
|  | *     now be NULL which means we should just let the | 
|  | *     packet pass through because splicing the frames | 
|  | *     back is already done. | 
|  | */ | 
|  | tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid); | 
|  |  | 
|  | if (!tid_tx) { | 
|  | /* do nothing, let packet pass through */ | 
|  | } else if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | 
|  | reset_agg_timer = true; | 
|  | } else { | 
|  | queued = true; | 
|  | if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) { | 
|  | clear_sta_flag(tx->sta, WLAN_STA_SP); | 
|  | ps_dbg(tx->sta->sdata, | 
|  | "STA %pM aid %d: SP frame queued, close the SP w/o telling the peer\n", | 
|  | tx->sta->sta.addr, tx->sta->sta.aid); | 
|  | } | 
|  | info->control.vif = &tx->sdata->vif; | 
|  | info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
|  | info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; | 
|  | __skb_queue_tail(&tid_tx->pending, skb); | 
|  | if (skb_queue_len(&tid_tx->pending) > STA_MAX_TX_BUFFER) | 
|  | purge_skb = __skb_dequeue(&tid_tx->pending); | 
|  | } | 
|  | spin_unlock(&tx->sta->lock); | 
|  |  | 
|  | if (purge_skb) | 
|  | ieee80211_free_txskb(&tx->local->hw, purge_skb); | 
|  | } | 
|  |  | 
|  | /* reset session timer */ | 
|  | if (reset_agg_timer) | 
|  | tid_tx->last_tx = jiffies; | 
|  |  | 
|  | return queued; | 
|  | } | 
|  |  | 
|  | void ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, struct sk_buff *skb) | 
|  | { | 
|  | struct rate_control_ref *ref = sdata->local->rate_ctrl; | 
|  | u16 tid; | 
|  |  | 
|  | if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER)) | 
|  | return; | 
|  |  | 
|  | if (!sta || | 
|  | (!sta->sta.valid_links && !sta->sta.deflink.ht_cap.ht_supported && | 
|  | !sta->sta.deflink.s1g_cap.s1g) || | 
|  | !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO || | 
|  | skb->protocol == sdata->control_port_protocol) | 
|  | return; | 
|  |  | 
|  | tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; | 
|  | if (likely(sta->ampdu_mlme.tid_tx[tid])) | 
|  | return; | 
|  |  | 
|  | ieee80211_start_tx_ba_session(&sta->sta, tid, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * initialises @tx | 
|  | * pass %NULL for the station if unknown, a valid pointer if known | 
|  | * or an ERR_PTR() if the station is known not to exist | 
|  | */ | 
|  | static ieee80211_tx_result | 
|  | ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_tx_data *tx, | 
|  | struct sta_info *sta, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | bool aggr_check = false; | 
|  | int tid; | 
|  |  | 
|  | memset(tx, 0, sizeof(*tx)); | 
|  | tx->skb = skb; | 
|  | tx->local = local; | 
|  | tx->sdata = sdata; | 
|  | __skb_queue_head_init(&tx->skbs); | 
|  |  | 
|  | /* | 
|  | * If this flag is set to true anywhere, and we get here, | 
|  | * we are doing the needed processing, so remove the flag | 
|  | * now. | 
|  | */ | 
|  | info->control.flags &= ~IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (likely(sta)) { | 
|  | if (!IS_ERR(sta)) | 
|  | tx->sta = sta; | 
|  | } else { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
|  | tx->sta = rcu_dereference(sdata->u.vlan.sta); | 
|  | if (!tx->sta && sdata->wdev.use_4addr) | 
|  | return TX_DROP; | 
|  | } else if (tx->sdata->control_port_protocol == tx->skb->protocol) { | 
|  | tx->sta = sta_info_get_bss(sdata, hdr->addr1); | 
|  | } | 
|  | if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) { | 
|  | tx->sta = sta_info_get(sdata, hdr->addr1); | 
|  | aggr_check = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && | 
|  | !ieee80211_is_qos_nullfunc(hdr->frame_control) && | 
|  | ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) && | 
|  | !ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW)) { | 
|  | struct tid_ampdu_tx *tid_tx; | 
|  |  | 
|  | tid = ieee80211_get_tid(hdr); | 
|  | tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); | 
|  | if (!tid_tx && aggr_check) { | 
|  | ieee80211_aggr_check(sdata, tx->sta, skb); | 
|  | tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); | 
|  | } | 
|  |  | 
|  | if (tid_tx) { | 
|  | bool queued; | 
|  |  | 
|  | queued = ieee80211_tx_prep_agg(tx, skb, info, | 
|  | tid_tx, tid); | 
|  |  | 
|  | if (unlikely(queued)) | 
|  | return TX_QUEUED; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (is_multicast_ether_addr(hdr->addr1)) { | 
|  | tx->flags &= ~IEEE80211_TX_UNICAST; | 
|  | info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
|  | } else | 
|  | tx->flags |= IEEE80211_TX_UNICAST; | 
|  |  | 
|  | if (!(info->flags & IEEE80211_TX_CTL_DONTFRAG)) { | 
|  | if (!(tx->flags & IEEE80211_TX_UNICAST) || | 
|  | skb->len + FCS_LEN <= local->hw.wiphy->frag_threshold || | 
|  | info->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | info->flags |= IEEE80211_TX_CTL_DONTFRAG; | 
|  | } | 
|  |  | 
|  | if (!tx->sta) | 
|  | info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | 
|  | else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) { | 
|  | info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | 
|  | ieee80211_check_fast_xmit(tx->sta); | 
|  | } | 
|  |  | 
|  | info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT; | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local, | 
|  | struct ieee80211_vif *vif, | 
|  | struct sta_info *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_txq *txq = NULL; | 
|  |  | 
|  | if ((info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) || | 
|  | (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)) | 
|  | return NULL; | 
|  |  | 
|  | if (!(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) && | 
|  | unlikely(!ieee80211_is_data_present(hdr->frame_control))) { | 
|  | if ((!ieee80211_is_mgmt(hdr->frame_control) || | 
|  | ieee80211_is_bufferable_mmpdu(skb) || | 
|  | vif->type == NL80211_IFTYPE_STATION) && | 
|  | sta && sta->uploaded) { | 
|  | /* | 
|  | * This will be NULL if the driver didn't set the | 
|  | * opt-in hardware flag. | 
|  | */ | 
|  | txq = sta->sta.txq[IEEE80211_NUM_TIDS]; | 
|  | } | 
|  | } else if (sta) { | 
|  | u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; | 
|  |  | 
|  | if (!sta->uploaded) | 
|  | return NULL; | 
|  |  | 
|  | txq = sta->sta.txq[tid]; | 
|  | } else { | 
|  | txq = vif->txq; | 
|  | } | 
|  |  | 
|  | if (!txq) | 
|  | return NULL; | 
|  |  | 
|  | return to_txq_info(txq); | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_skb_enqueue_time(struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff *next; | 
|  | codel_time_t now = codel_get_time(); | 
|  |  | 
|  | skb_list_walk_safe(skb, skb, next) | 
|  | IEEE80211_SKB_CB(skb)->control.enqueue_time = now; | 
|  | } | 
|  |  | 
|  | static u32 codel_skb_len_func(const struct sk_buff *skb) | 
|  | { | 
|  | return skb->len; | 
|  | } | 
|  |  | 
|  | static codel_time_t codel_skb_time_func(const struct sk_buff *skb) | 
|  | { | 
|  | const struct ieee80211_tx_info *info; | 
|  |  | 
|  | info = (const struct ieee80211_tx_info *)skb->cb; | 
|  | return info->control.enqueue_time; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *codel_dequeue_func(struct codel_vars *cvars, | 
|  | void *ctx) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  | struct txq_info *txqi; | 
|  | struct fq *fq; | 
|  | struct fq_flow *flow; | 
|  |  | 
|  | txqi = ctx; | 
|  | local = vif_to_sdata(txqi->txq.vif)->local; | 
|  | fq = &local->fq; | 
|  |  | 
|  | if (cvars == &txqi->def_cvars) | 
|  | flow = &txqi->tin.default_flow; | 
|  | else | 
|  | flow = &fq->flows[cvars - local->cvars]; | 
|  |  | 
|  | return fq_flow_dequeue(fq, flow); | 
|  | } | 
|  |  | 
|  | static void codel_drop_func(struct sk_buff *skb, | 
|  | void *ctx) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  | struct ieee80211_hw *hw; | 
|  | struct txq_info *txqi; | 
|  |  | 
|  | txqi = ctx; | 
|  | local = vif_to_sdata(txqi->txq.vif)->local; | 
|  | hw = &local->hw; | 
|  |  | 
|  | ieee80211_free_txskb(hw, skb); | 
|  | } | 
|  |  | 
|  | static struct sk_buff *fq_tin_dequeue_func(struct fq *fq, | 
|  | struct fq_tin *tin, | 
|  | struct fq_flow *flow) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  | struct txq_info *txqi; | 
|  | struct codel_vars *cvars; | 
|  | struct codel_params *cparams; | 
|  | struct codel_stats *cstats; | 
|  |  | 
|  | local = container_of(fq, struct ieee80211_local, fq); | 
|  | txqi = container_of(tin, struct txq_info, tin); | 
|  | cparams = &local->cparams; | 
|  | cstats = &txqi->cstats; | 
|  |  | 
|  | if (flow == &tin->default_flow) | 
|  | cvars = &txqi->def_cvars; | 
|  | else | 
|  | cvars = &local->cvars[flow - fq->flows]; | 
|  |  | 
|  | return codel_dequeue(txqi, | 
|  | &flow->backlog, | 
|  | cparams, | 
|  | cvars, | 
|  | cstats, | 
|  | codel_skb_len_func, | 
|  | codel_skb_time_func, | 
|  | codel_drop_func, | 
|  | codel_dequeue_func); | 
|  | } | 
|  |  | 
|  | static void fq_skb_free_func(struct fq *fq, | 
|  | struct fq_tin *tin, | 
|  | struct fq_flow *flow, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  |  | 
|  | local = container_of(fq, struct ieee80211_local, fq); | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_txq_enqueue(struct ieee80211_local *local, | 
|  | struct txq_info *txqi, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct fq *fq = &local->fq; | 
|  | struct fq_tin *tin = &txqi->tin; | 
|  | u32 flow_idx; | 
|  |  | 
|  | ieee80211_set_skb_enqueue_time(skb); | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  | /* | 
|  | * For management frames, don't really apply codel etc., | 
|  | * we don't want to apply any shaping or anything we just | 
|  | * want to simplify the driver API by having them on the | 
|  | * txqi. | 
|  | */ | 
|  | if (unlikely(txqi->txq.tid == IEEE80211_NUM_TIDS)) { | 
|  | IEEE80211_SKB_CB(skb)->control.flags |= | 
|  | IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
|  | __skb_queue_tail(&txqi->frags, skb); | 
|  | } else { | 
|  | flow_idx = fq_flow_idx(fq, skb); | 
|  | fq_tin_enqueue(fq, tin, flow_idx, skb, | 
|  | fq_skb_free_func); | 
|  | } | 
|  | spin_unlock_bh(&fq->lock); | 
|  | } | 
|  |  | 
|  | static bool fq_vlan_filter_func(struct fq *fq, struct fq_tin *tin, | 
|  | struct fq_flow *flow, struct sk_buff *skb, | 
|  | void *data) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | return info->control.vif == data; | 
|  | } | 
|  |  | 
|  | void ieee80211_txq_remove_vlan(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct fq *fq = &local->fq; | 
|  | struct txq_info *txqi; | 
|  | struct fq_tin *tin; | 
|  | struct ieee80211_sub_if_data *ap; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP_VLAN)) | 
|  | return; | 
|  |  | 
|  | ap = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); | 
|  |  | 
|  | if (!ap->vif.txq) | 
|  | return; | 
|  |  | 
|  | txqi = to_txq_info(ap->vif.txq); | 
|  | tin = &txqi->tin; | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  | fq_tin_filter(fq, tin, fq_vlan_filter_func, &sdata->vif, | 
|  | fq_skb_free_func); | 
|  | spin_unlock_bh(&fq->lock); | 
|  | } | 
|  |  | 
|  | void ieee80211_txq_init(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, | 
|  | struct txq_info *txqi, int tid) | 
|  | { | 
|  | fq_tin_init(&txqi->tin); | 
|  | codel_vars_init(&txqi->def_cvars); | 
|  | codel_stats_init(&txqi->cstats); | 
|  | __skb_queue_head_init(&txqi->frags); | 
|  | INIT_LIST_HEAD(&txqi->schedule_order); | 
|  |  | 
|  | txqi->txq.vif = &sdata->vif; | 
|  |  | 
|  | if (!sta) { | 
|  | sdata->vif.txq = &txqi->txq; | 
|  | txqi->txq.tid = 0; | 
|  | txqi->txq.ac = IEEE80211_AC_BE; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (tid == IEEE80211_NUM_TIDS) { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) { | 
|  | /* Drivers need to opt in to the management MPDU TXQ */ | 
|  | if (!ieee80211_hw_check(&sdata->local->hw, | 
|  | STA_MMPDU_TXQ)) | 
|  | return; | 
|  | } else if (!ieee80211_hw_check(&sdata->local->hw, | 
|  | BUFF_MMPDU_TXQ)) { | 
|  | /* Drivers need to opt in to the bufferable MMPDU TXQ */ | 
|  | return; | 
|  | } | 
|  | txqi->txq.ac = IEEE80211_AC_VO; | 
|  | } else { | 
|  | txqi->txq.ac = ieee80211_ac_from_tid(tid); | 
|  | } | 
|  |  | 
|  | txqi->txq.sta = &sta->sta; | 
|  | txqi->txq.tid = tid; | 
|  | sta->sta.txq[tid] = &txqi->txq; | 
|  | } | 
|  |  | 
|  | void ieee80211_txq_purge(struct ieee80211_local *local, | 
|  | struct txq_info *txqi) | 
|  | { | 
|  | struct fq *fq = &local->fq; | 
|  | struct fq_tin *tin = &txqi->tin; | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  | fq_tin_reset(fq, tin, fq_skb_free_func); | 
|  | ieee80211_purge_tx_queue(&local->hw, &txqi->frags); | 
|  | spin_unlock_bh(&fq->lock); | 
|  |  | 
|  | spin_lock_bh(&local->active_txq_lock[txqi->txq.ac]); | 
|  | list_del_init(&txqi->schedule_order); | 
|  | spin_unlock_bh(&local->active_txq_lock[txqi->txq.ac]); | 
|  | } | 
|  |  | 
|  | void ieee80211_txq_set_params(struct ieee80211_local *local, int radio_idx) | 
|  | { | 
|  | if (local->hw.wiphy->txq_limit) | 
|  | local->fq.limit = local->hw.wiphy->txq_limit; | 
|  | else | 
|  | local->hw.wiphy->txq_limit = local->fq.limit; | 
|  |  | 
|  | if (local->hw.wiphy->txq_memory_limit) | 
|  | local->fq.memory_limit = local->hw.wiphy->txq_memory_limit; | 
|  | else | 
|  | local->hw.wiphy->txq_memory_limit = local->fq.memory_limit; | 
|  |  | 
|  | if (local->hw.wiphy->txq_quantum) | 
|  | local->fq.quantum = local->hw.wiphy->txq_quantum; | 
|  | else | 
|  | local->hw.wiphy->txq_quantum = local->fq.quantum; | 
|  | } | 
|  |  | 
|  | int ieee80211_txq_setup_flows(struct ieee80211_local *local) | 
|  | { | 
|  | struct fq *fq = &local->fq; | 
|  | int ret; | 
|  | int i; | 
|  | bool supp_vht = false; | 
|  | enum nl80211_band band; | 
|  |  | 
|  | ret = fq_init(fq, 4096); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * If the hardware doesn't support VHT, it is safe to limit the maximum | 
|  | * queue size. 4 Mbytes is 64 max-size aggregates in 802.11n. | 
|  | */ | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[band]; | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | supp_vht = supp_vht || sband->vht_cap.vht_supported; | 
|  | } | 
|  |  | 
|  | if (!supp_vht) | 
|  | fq->memory_limit = 4 << 20; /* 4 Mbytes */ | 
|  |  | 
|  | codel_params_init(&local->cparams); | 
|  | local->cparams.interval = MS2TIME(100); | 
|  | local->cparams.target = MS2TIME(20); | 
|  | local->cparams.ecn = true; | 
|  |  | 
|  | local->cvars = kvcalloc(fq->flows_cnt, sizeof(local->cvars[0]), | 
|  | GFP_KERNEL); | 
|  | if (!local->cvars) { | 
|  | spin_lock_bh(&fq->lock); | 
|  | fq_reset(fq, fq_skb_free_func); | 
|  | spin_unlock_bh(&fq->lock); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < fq->flows_cnt; i++) | 
|  | codel_vars_init(&local->cvars[i]); | 
|  |  | 
|  | ieee80211_txq_set_params(local, -1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_txq_teardown_flows(struct ieee80211_local *local) | 
|  | { | 
|  | struct fq *fq = &local->fq; | 
|  |  | 
|  | kvfree(local->cvars); | 
|  | local->cvars = NULL; | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  | fq_reset(fq, fq_skb_free_func); | 
|  | spin_unlock_bh(&fq->lock); | 
|  | } | 
|  |  | 
|  | static bool ieee80211_queue_skb(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_vif *vif; | 
|  | struct txq_info *txqi; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR) | 
|  | return false; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  |  | 
|  | vif = &sdata->vif; | 
|  | txqi = ieee80211_get_txq(local, vif, sta, skb); | 
|  |  | 
|  | if (!txqi) | 
|  | return false; | 
|  |  | 
|  | ieee80211_txq_enqueue(local, txqi, skb); | 
|  |  | 
|  | schedule_and_wake_txq(local, txqi); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_tx_frags(struct ieee80211_local *local, | 
|  | struct ieee80211_vif *vif, | 
|  | struct sta_info *sta, | 
|  | struct sk_buff_head *skbs, | 
|  | bool txpending) | 
|  | { | 
|  | struct ieee80211_tx_control control = {}; | 
|  | struct sk_buff *skb, *tmp; | 
|  | unsigned long flags; | 
|  |  | 
|  | skb_queue_walk_safe(skbs, skb, tmp) { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | int q = info->hw_queue; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (WARN_ON_ONCE(q >= local->hw.queues)) { | 
|  | __skb_unlink(skb, skbs); | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | continue; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | if (local->queue_stop_reasons[q] || | 
|  | (!txpending && !skb_queue_empty(&local->pending[q]))) { | 
|  | if (unlikely(info->flags & | 
|  | IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) { | 
|  | if (local->queue_stop_reasons[q] & | 
|  | ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) { | 
|  | /* | 
|  | * Drop off-channel frames if queues | 
|  | * are stopped for any reason other | 
|  | * than off-channel operation. Never | 
|  | * queue them. | 
|  | */ | 
|  | spin_unlock_irqrestore( | 
|  | &local->queue_stop_reason_lock, | 
|  | flags); | 
|  | ieee80211_purge_tx_queue(&local->hw, | 
|  | skbs); | 
|  | return true; | 
|  | } | 
|  | } else { | 
|  |  | 
|  | /* | 
|  | * Since queue is stopped, queue up frames for | 
|  | * later transmission from the tx-pending | 
|  | * tasklet when the queue is woken again. | 
|  | */ | 
|  | if (txpending) | 
|  | skb_queue_splice_init(skbs, | 
|  | &local->pending[q]); | 
|  | else | 
|  | skb_queue_splice_tail_init(skbs, | 
|  | &local->pending[q]); | 
|  |  | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, | 
|  | flags); | 
|  | return false; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | info->control.vif = vif; | 
|  | control.sta = sta ? &sta->sta : NULL; | 
|  |  | 
|  | __skb_unlink(skb, skbs); | 
|  | drv_tx(local, &control, skb); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns false if the frame couldn't be transmitted but was queued instead. | 
|  | */ | 
|  | static bool __ieee80211_tx(struct ieee80211_local *local, | 
|  | struct sk_buff_head *skbs, struct sta_info *sta, | 
|  | bool txpending) | 
|  | { | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_vif *vif; | 
|  | struct sk_buff *skb; | 
|  | bool result; | 
|  |  | 
|  | if (WARN_ON(skb_queue_empty(skbs))) | 
|  | return true; | 
|  |  | 
|  | skb = skb_peek(skbs); | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | sdata = vif_to_sdata(info->control.vif); | 
|  | if (sta && !sta->uploaded) | 
|  | sta = NULL; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if ((sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) || | 
|  | ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) { | 
|  | vif = &sdata->vif; | 
|  | break; | 
|  | } | 
|  | sdata = rcu_dereference(local->monitor_sdata); | 
|  | if (sdata && ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) { | 
|  | vif = &sdata->vif; | 
|  | info->hw_queue = | 
|  | vif->hw_queue[skb_get_queue_mapping(skb)]; | 
|  | } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { | 
|  | ieee80211_purge_tx_queue(&local->hw, skbs); | 
|  | return true; | 
|  | } else | 
|  | vif = NULL; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  | fallthrough; | 
|  | default: | 
|  | vif = &sdata->vif; | 
|  | break; | 
|  | } | 
|  |  | 
|  | result = ieee80211_tx_frags(local, vif, sta, skbs, txpending); | 
|  |  | 
|  | WARN_ON_ONCE(!skb_queue_empty(skbs)); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Invoke TX handlers, return 0 on success and non-zero if the | 
|  | * frame was dropped or queued. | 
|  | * | 
|  | * The handlers are split into an early and late part. The latter is everything | 
|  | * that can be sensitive to reordering, and will be deferred to after packets | 
|  | * are dequeued from the intermediate queues (when they are enabled). | 
|  | */ | 
|  | static int invoke_tx_handlers_early(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | ieee80211_tx_result res = TX_DROP; | 
|  |  | 
|  | #define CALL_TXH(txh) \ | 
|  | do {				\ | 
|  | res = txh(tx);		\ | 
|  | if (res != TX_CONTINUE)	\ | 
|  | goto txh_done;	\ | 
|  | } while (0) | 
|  |  | 
|  | CALL_TXH(ieee80211_tx_h_dynamic_ps); | 
|  | CALL_TXH(ieee80211_tx_h_check_assoc); | 
|  | CALL_TXH(ieee80211_tx_h_ps_buf); | 
|  | CALL_TXH(ieee80211_tx_h_check_control_port_protocol); | 
|  | CALL_TXH(ieee80211_tx_h_select_key); | 
|  |  | 
|  | txh_done: | 
|  | if (unlikely(res == TX_DROP)) { | 
|  | tx->sdata->tx_handlers_drop++; | 
|  | if (tx->skb) | 
|  | ieee80211_free_txskb(&tx->local->hw, tx->skb); | 
|  | else | 
|  | ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); | 
|  | return -1; | 
|  | } else if (unlikely(res == TX_QUEUED)) { | 
|  | I802_DEBUG_INC(tx->local->tx_handlers_queued); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Late handlers can be called while the sta lock is held. Handlers that can | 
|  | * cause packets to be generated will cause deadlock! | 
|  | */ | 
|  | static int invoke_tx_handlers_late(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
|  | ieee80211_tx_result res = TX_CONTINUE; | 
|  |  | 
|  | if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) | 
|  | CALL_TXH(ieee80211_tx_h_rate_ctrl); | 
|  |  | 
|  | if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) { | 
|  | __skb_queue_tail(&tx->skbs, tx->skb); | 
|  | tx->skb = NULL; | 
|  | goto txh_done; | 
|  | } | 
|  |  | 
|  | CALL_TXH(ieee80211_tx_h_michael_mic_add); | 
|  | CALL_TXH(ieee80211_tx_h_sequence); | 
|  | CALL_TXH(ieee80211_tx_h_fragment); | 
|  | /* handlers after fragment must be aware of tx info fragmentation! */ | 
|  | CALL_TXH(ieee80211_tx_h_stats); | 
|  | CALL_TXH(ieee80211_tx_h_encrypt); | 
|  | if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) | 
|  | CALL_TXH(ieee80211_tx_h_calculate_duration); | 
|  | #undef CALL_TXH | 
|  |  | 
|  | txh_done: | 
|  | if (unlikely(res == TX_DROP)) { | 
|  | tx->sdata->tx_handlers_drop++; | 
|  | if (tx->skb) | 
|  | ieee80211_free_txskb(&tx->local->hw, tx->skb); | 
|  | else | 
|  | ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); | 
|  | return -1; | 
|  | } else if (unlikely(res == TX_QUEUED)) { | 
|  | I802_DEBUG_INC(tx->local->tx_handlers_queued); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int invoke_tx_handlers(struct ieee80211_tx_data *tx) | 
|  | { | 
|  | int r = invoke_tx_handlers_early(tx); | 
|  |  | 
|  | if (r) | 
|  | return r; | 
|  | return invoke_tx_handlers_late(tx); | 
|  | } | 
|  |  | 
|  | bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, struct sk_buff *skb, | 
|  | int band, struct ieee80211_sta **sta) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_tx_data tx; | 
|  | struct sk_buff *skb2; | 
|  |  | 
|  | if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP) | 
|  | return false; | 
|  |  | 
|  | info->band = band; | 
|  | info->control.vif = vif; | 
|  | info->hw_queue = vif->hw_queue[skb_get_queue_mapping(skb)]; | 
|  |  | 
|  | if (invoke_tx_handlers(&tx)) | 
|  | return false; | 
|  |  | 
|  | if (sta) { | 
|  | if (tx.sta) | 
|  | *sta = &tx.sta->sta; | 
|  | else | 
|  | *sta = NULL; | 
|  | } | 
|  |  | 
|  | /* this function isn't suitable for fragmented data frames */ | 
|  | skb2 = __skb_dequeue(&tx.skbs); | 
|  | if (WARN_ON(skb2 != skb || !skb_queue_empty(&tx.skbs))) { | 
|  | ieee80211_free_txskb(hw, skb2); | 
|  | ieee80211_purge_tx_queue(hw, &tx.skbs); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_tx_prepare_skb); | 
|  |  | 
|  | /* | 
|  | * Returns false if the frame couldn't be transmitted but was queued instead. | 
|  | */ | 
|  | static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, struct sk_buff *skb, | 
|  | bool txpending) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_data tx; | 
|  | ieee80211_tx_result res_prepare; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | bool result = true; | 
|  |  | 
|  | if (unlikely(skb->len < 10)) { | 
|  | dev_kfree_skb(skb); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* initialises tx */ | 
|  | res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb); | 
|  |  | 
|  | if (unlikely(res_prepare == TX_DROP)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | tx.sdata->tx_handlers_drop++; | 
|  | return true; | 
|  | } else if (unlikely(res_prepare == TX_QUEUED)) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* set up hw_queue value early */ | 
|  | if (!(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) || | 
|  | !ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) | 
|  | info->hw_queue = | 
|  | sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; | 
|  |  | 
|  | if (invoke_tx_handlers_early(&tx)) | 
|  | return true; | 
|  |  | 
|  | if (ieee80211_queue_skb(local, sdata, tx.sta, tx.skb)) | 
|  | return true; | 
|  |  | 
|  | if (!invoke_tx_handlers_late(&tx)) | 
|  | result = __ieee80211_tx(local, &tx.skbs, tx.sta, txpending); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* device xmit handlers */ | 
|  |  | 
|  | enum ieee80211_encrypt { | 
|  | ENCRYPT_NO, | 
|  | ENCRYPT_MGMT, | 
|  | ENCRYPT_DATA, | 
|  | }; | 
|  |  | 
|  | static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, | 
|  | int head_need, | 
|  | enum ieee80211_encrypt encrypt) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | bool enc_tailroom; | 
|  | int tail_need = 0; | 
|  |  | 
|  | enc_tailroom = encrypt == ENCRYPT_MGMT || | 
|  | (encrypt == ENCRYPT_DATA && | 
|  | sdata->crypto_tx_tailroom_needed_cnt); | 
|  |  | 
|  | if (enc_tailroom) { | 
|  | tail_need = IEEE80211_ENCRYPT_TAILROOM; | 
|  | tail_need -= skb_tailroom(skb); | 
|  | tail_need = max_t(int, tail_need, 0); | 
|  | } | 
|  |  | 
|  | if (skb_cloned(skb) && | 
|  | (!ieee80211_hw_check(&local->hw, SUPPORTS_CLONED_SKBS) || | 
|  | !skb_clone_writable(skb, ETH_HLEN) || enc_tailroom)) | 
|  | I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | 
|  | else if (head_need || tail_need) | 
|  | I802_DEBUG_INC(local->tx_expand_skb_head); | 
|  | else | 
|  | return 0; | 
|  |  | 
|  | if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) { | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "failed to reallocate TX buffer\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | int headroom; | 
|  | enum ieee80211_encrypt encrypt; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT) | 
|  | encrypt = ENCRYPT_NO; | 
|  | else if (ieee80211_is_mgmt(hdr->frame_control)) | 
|  | encrypt = ENCRYPT_MGMT; | 
|  | else | 
|  | encrypt = ENCRYPT_DATA; | 
|  |  | 
|  | headroom = local->tx_headroom; | 
|  | if (encrypt != ENCRYPT_NO) | 
|  | headroom += IEEE80211_ENCRYPT_HEADROOM; | 
|  | headroom -= skb_headroom(skb); | 
|  | headroom = max_t(int, 0, headroom); | 
|  |  | 
|  | if (ieee80211_skb_resize(sdata, skb, headroom, encrypt)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* reload after potential resize */ | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  | info->control.vif = &sdata->vif; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | if (ieee80211_is_data(hdr->frame_control) && | 
|  | is_unicast_ether_addr(hdr->addr1)) { | 
|  | if (mesh_nexthop_resolve(sdata, skb)) | 
|  | return; /* skb queued: don't free */ | 
|  | } else { | 
|  | ieee80211_mps_set_frame_flags(sdata, NULL, hdr); | 
|  | } | 
|  | } | 
|  |  | 
|  | ieee80211_set_qos_hdr(sdata, skb); | 
|  | ieee80211_tx(sdata, sta, skb, false); | 
|  | } | 
|  |  | 
|  | static bool ieee80211_validate_radiotap_len(struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_radiotap_header *rthdr = | 
|  | (struct ieee80211_radiotap_header *)skb->data; | 
|  |  | 
|  | /* check for not even having the fixed radiotap header part */ | 
|  | if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | 
|  | return false; /* too short to be possibly valid */ | 
|  |  | 
|  | /* is it a header version we can trust to find length from? */ | 
|  | if (unlikely(rthdr->it_version)) | 
|  | return false; /* only version 0 is supported */ | 
|  |  | 
|  | /* does the skb contain enough to deliver on the alleged length? */ | 
|  | if (unlikely(skb->len < ieee80211_get_radiotap_len(skb->data))) | 
|  | return false; /* skb too short for claimed rt header extent */ | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ieee80211_parse_tx_radiotap(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  | struct ieee80211_radiotap_iterator iterator; | 
|  | struct ieee80211_radiotap_header *rthdr = | 
|  | (struct ieee80211_radiotap_header *) skb->data; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, | 
|  | NULL); | 
|  | u16 txflags; | 
|  | u16 rate = 0; | 
|  | bool rate_found = false; | 
|  | u8 rate_retries = 0; | 
|  | u16 rate_flags = 0; | 
|  | u8 mcs_known, mcs_flags, mcs_bw; | 
|  | u16 vht_known; | 
|  | u8 vht_mcs = 0, vht_nss = 0; | 
|  | int i; | 
|  |  | 
|  | if (!ieee80211_validate_radiotap_len(skb)) | 
|  | return false; | 
|  |  | 
|  | info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | | 
|  | IEEE80211_TX_CTL_DONTFRAG; | 
|  |  | 
|  | /* | 
|  | * for every radiotap entry that is present | 
|  | * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | 
|  | * entries present, or -EINVAL on error) | 
|  | */ | 
|  |  | 
|  | while (!ret) { | 
|  | ret = ieee80211_radiotap_iterator_next(&iterator); | 
|  |  | 
|  | if (ret) | 
|  | continue; | 
|  |  | 
|  | /* see if this argument is something we can use */ | 
|  | switch (iterator.this_arg_index) { | 
|  | /* | 
|  | * You must take care when dereferencing iterator.this_arg | 
|  | * for multibyte types... the pointer is not aligned.  Use | 
|  | * get_unaligned((type *)iterator.this_arg) to dereference | 
|  | * iterator.this_arg for type "type" safely on all arches. | 
|  | */ | 
|  | case IEEE80211_RADIOTAP_FLAGS: | 
|  | if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | 
|  | /* | 
|  | * this indicates that the skb we have been | 
|  | * handed has the 32-bit FCS CRC at the end... | 
|  | * we should react to that by snipping it off | 
|  | * because it will be recomputed and added | 
|  | * on transmission | 
|  | */ | 
|  | if (skb->len < (iterator._max_length + FCS_LEN)) | 
|  | return false; | 
|  |  | 
|  | skb_trim(skb, skb->len - FCS_LEN); | 
|  | } | 
|  | if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | 
|  | info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | 
|  | info->flags &= ~IEEE80211_TX_CTL_DONTFRAG; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_TX_FLAGS: | 
|  | txflags = get_unaligned_le16(iterator.this_arg); | 
|  | if (txflags & IEEE80211_RADIOTAP_F_TX_NOACK) | 
|  | info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
|  | if (txflags & IEEE80211_RADIOTAP_F_TX_NOSEQNO) | 
|  | info->control.flags |= IEEE80211_TX_CTRL_NO_SEQNO; | 
|  | if (txflags & IEEE80211_RADIOTAP_F_TX_ORDER) | 
|  | info->control.flags |= | 
|  | IEEE80211_TX_CTRL_DONT_REORDER; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_RATE: | 
|  | rate = *iterator.this_arg; | 
|  | rate_flags = 0; | 
|  | rate_found = true; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_ANTENNA: | 
|  | /* this can appear multiple times, keep a bitmap */ | 
|  | info->control.antennas |= BIT(*iterator.this_arg); | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_DATA_RETRIES: | 
|  | rate_retries = *iterator.this_arg; | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_MCS: | 
|  | mcs_known = iterator.this_arg[0]; | 
|  | mcs_flags = iterator.this_arg[1]; | 
|  | if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS)) | 
|  | break; | 
|  |  | 
|  | rate_found = true; | 
|  | rate = iterator.this_arg[2]; | 
|  | rate_flags = IEEE80211_TX_RC_MCS; | 
|  |  | 
|  | if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI && | 
|  | mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) | 
|  | rate_flags |= IEEE80211_TX_RC_SHORT_GI; | 
|  |  | 
|  | mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK; | 
|  | if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && | 
|  | mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40) | 
|  | rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
|  |  | 
|  | if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_FEC && | 
|  | mcs_flags & IEEE80211_RADIOTAP_MCS_FEC_LDPC) | 
|  | info->flags |= IEEE80211_TX_CTL_LDPC; | 
|  |  | 
|  | if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_STBC) { | 
|  | u8 stbc = u8_get_bits(mcs_flags, | 
|  | IEEE80211_RADIOTAP_MCS_STBC_MASK); | 
|  |  | 
|  | info->flags |= | 
|  | u32_encode_bits(stbc, | 
|  | IEEE80211_TX_CTL_STBC); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IEEE80211_RADIOTAP_VHT: | 
|  | vht_known = get_unaligned_le16(iterator.this_arg); | 
|  | rate_found = true; | 
|  |  | 
|  | rate_flags = IEEE80211_TX_RC_VHT_MCS; | 
|  | if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) && | 
|  | (iterator.this_arg[2] & | 
|  | IEEE80211_RADIOTAP_VHT_FLAG_SGI)) | 
|  | rate_flags |= IEEE80211_TX_RC_SHORT_GI; | 
|  | if (vht_known & | 
|  | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) { | 
|  | if (iterator.this_arg[3] == 1) | 
|  | rate_flags |= | 
|  | IEEE80211_TX_RC_40_MHZ_WIDTH; | 
|  | else if (iterator.this_arg[3] == 4) | 
|  | rate_flags |= | 
|  | IEEE80211_TX_RC_80_MHZ_WIDTH; | 
|  | else if (iterator.this_arg[3] == 11) | 
|  | rate_flags |= | 
|  | IEEE80211_TX_RC_160_MHZ_WIDTH; | 
|  | } | 
|  |  | 
|  | vht_mcs = iterator.this_arg[4] >> 4; | 
|  | if (vht_mcs > 11) | 
|  | vht_mcs = 0; | 
|  | vht_nss = iterator.this_arg[4] & 0xF; | 
|  | if (!vht_nss || vht_nss > 8) | 
|  | vht_nss = 1; | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Please update the file | 
|  | * Documentation/networking/mac80211-injection.rst | 
|  | * when parsing new fields here. | 
|  | */ | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | 
|  | return false; | 
|  |  | 
|  | if (rate_found) { | 
|  | struct ieee80211_supported_band *sband = | 
|  | local->hw.wiphy->bands[info->band]; | 
|  |  | 
|  | info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT; | 
|  |  | 
|  | for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | 
|  | info->control.rates[i].idx = -1; | 
|  | info->control.rates[i].flags = 0; | 
|  | info->control.rates[i].count = 0; | 
|  | } | 
|  |  | 
|  | if (rate_flags & IEEE80211_TX_RC_MCS) { | 
|  | /* reset antennas if not enough */ | 
|  | if (IEEE80211_HT_MCS_CHAINS(rate) > | 
|  | hweight8(info->control.antennas)) | 
|  | info->control.antennas = 0; | 
|  |  | 
|  | info->control.rates[0].idx = rate; | 
|  | } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) { | 
|  | /* reset antennas if not enough */ | 
|  | if (vht_nss > hweight8(info->control.antennas)) | 
|  | info->control.antennas = 0; | 
|  |  | 
|  | ieee80211_rate_set_vht(info->control.rates, vht_mcs, | 
|  | vht_nss); | 
|  | } else if (sband) { | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (rate * 5 != sband->bitrates[i].bitrate) | 
|  | continue; | 
|  |  | 
|  | info->control.rates[0].idx = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (info->control.rates[0].idx < 0) | 
|  | info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT; | 
|  |  | 
|  | info->control.rates[0].flags = rate_flags; | 
|  | info->control.rates[0].count = min_t(u8, rate_retries + 1, | 
|  | local->hw.max_rate_tries); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_sub_if_data *tmp_sdata, *sdata; | 
|  | struct cfg80211_chan_def *chandef; | 
|  | u16 len_rthdr; | 
|  | int hdrlen; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | if (unlikely(!ieee80211_sdata_running(sdata))) | 
|  | goto fail; | 
|  |  | 
|  | memset(info, 0, sizeof(*info)); | 
|  | info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | | 
|  | IEEE80211_TX_CTL_INJECTED; | 
|  |  | 
|  | /* Sanity-check the length of the radiotap header */ | 
|  | if (!ieee80211_validate_radiotap_len(skb)) | 
|  | goto fail; | 
|  |  | 
|  | /* we now know there is a radiotap header with a length we can use */ | 
|  | len_rthdr = ieee80211_get_radiotap_len(skb->data); | 
|  |  | 
|  | /* | 
|  | * fix up the pointers accounting for the radiotap | 
|  | * header still being in there.  We are being given | 
|  | * a precooked IEEE80211 header so no need for | 
|  | * normal processing | 
|  | */ | 
|  | skb_set_mac_header(skb, len_rthdr); | 
|  | /* | 
|  | * these are just fixed to the end of the rt area since we | 
|  | * don't have any better information and at this point, nobody cares | 
|  | */ | 
|  | skb_set_network_header(skb, len_rthdr); | 
|  | skb_set_transport_header(skb, len_rthdr); | 
|  |  | 
|  | if (skb->len < len_rthdr + 2) | 
|  | goto fail; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | if (skb->len < len_rthdr + hdrlen) | 
|  | goto fail; | 
|  |  | 
|  | /* | 
|  | * Initialize skb->protocol if the injected frame is a data frame | 
|  | * carrying a rfc1042 header | 
|  | */ | 
|  | if (ieee80211_is_data(hdr->frame_control) && | 
|  | skb->len >= len_rthdr + hdrlen + sizeof(rfc1042_header) + 2) { | 
|  | u8 *payload = (u8 *)hdr + hdrlen; | 
|  |  | 
|  | if (ether_addr_equal(payload, rfc1042_header)) | 
|  | skb->protocol = cpu_to_be16((payload[6] << 8) | | 
|  | payload[7]); | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* | 
|  | * We process outgoing injected frames that have a local address | 
|  | * we handle as though they are non-injected frames. | 
|  | * This code here isn't entirely correct, the local MAC address | 
|  | * isn't always enough to find the interface to use; for proper | 
|  | * VLAN support we have an nl80211-based mechanism. | 
|  | * | 
|  | * This is necessary, for example, for old hostapd versions that | 
|  | * don't use nl80211-based management TX/RX. | 
|  | */ | 
|  | list_for_each_entry_rcu(tmp_sdata, &local->interfaces, list) { | 
|  | if (!ieee80211_sdata_running(tmp_sdata)) | 
|  | continue; | 
|  | if (tmp_sdata->vif.type == NL80211_IFTYPE_MONITOR || | 
|  | tmp_sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | continue; | 
|  | if (ether_addr_equal(tmp_sdata->vif.addr, hdr->addr2)) { | 
|  | sdata = tmp_sdata; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  | if (!chanctx_conf) { | 
|  | tmp_sdata = rcu_dereference(local->monitor_sdata); | 
|  | if (tmp_sdata) | 
|  | chanctx_conf = | 
|  | rcu_dereference(tmp_sdata->vif.bss_conf.chanctx_conf); | 
|  | } | 
|  |  | 
|  | if (chanctx_conf) | 
|  | chandef = &chanctx_conf->def; | 
|  | else | 
|  | goto fail_rcu; | 
|  |  | 
|  | /* | 
|  | * If driver/HW supports IEEE80211_CHAN_CAN_MONITOR we still | 
|  | * shouldn't transmit on disabled channels. | 
|  | */ | 
|  | if (!cfg80211_chandef_usable(local->hw.wiphy, chandef, | 
|  | IEEE80211_CHAN_DISABLED)) | 
|  | goto fail_rcu; | 
|  |  | 
|  | /* | 
|  | * Frame injection is not allowed if beaconing is not allowed | 
|  | * or if we need radar detection. Beaconing is usually not allowed when | 
|  | * the mode or operation (Adhoc, AP, Mesh) does not support DFS. | 
|  | * Passive scan is also used in world regulatory domains where | 
|  | * your country is not known and as such it should be treated as | 
|  | * NO TX unless the channel is explicitly allowed in which case | 
|  | * your current regulatory domain would not have the passive scan | 
|  | * flag. | 
|  | * | 
|  | * Since AP mode uses monitor interfaces to inject/TX management | 
|  | * frames we can make AP mode the exception to this rule once it | 
|  | * supports radar detection as its implementation can deal with | 
|  | * radar detection by itself. We can do that later by adding a | 
|  | * monitor flag interfaces used for AP support. | 
|  | */ | 
|  | if (!cfg80211_reg_can_beacon(local->hw.wiphy, chandef, | 
|  | sdata->vif.type)) | 
|  | goto fail_rcu; | 
|  |  | 
|  | info->band = chandef->chan->band; | 
|  |  | 
|  | /* Initialize skb->priority according to frame type and TID class, | 
|  | * with respect to the sub interface that the frame will actually | 
|  | * be transmitted on. If the DONT_REORDER flag is set, the original | 
|  | * skb-priority is preserved to assure frames injected with this | 
|  | * flag are not reordered relative to each other. | 
|  | */ | 
|  | ieee80211_select_queue_80211(sdata, skb, hdr); | 
|  | skb_set_queue_mapping(skb, ieee80211_ac_from_tid(skb->priority)); | 
|  |  | 
|  | /* | 
|  | * Process the radiotap header. This will now take into account the | 
|  | * selected chandef above to accurately set injection rates and | 
|  | * retransmissions. | 
|  | */ | 
|  | if (!ieee80211_parse_tx_radiotap(skb, dev)) | 
|  | goto fail_rcu; | 
|  |  | 
|  | /* remove the injection radiotap header */ | 
|  | skb_pull(skb, len_rthdr); | 
|  |  | 
|  | ieee80211_xmit(sdata, NULL, skb); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | fail_rcu: | 
|  | rcu_read_unlock(); | 
|  | fail: | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | 
|  | } | 
|  |  | 
|  | static inline bool ieee80211_is_tdls_setup(struct sk_buff *skb) | 
|  | { | 
|  | u16 ethertype = (skb->data[12] << 8) | skb->data[13]; | 
|  |  | 
|  | return ethertype == ETH_P_TDLS && | 
|  | skb->len > 14 && | 
|  | skb->data[14] == WLAN_TDLS_SNAP_RFTYPE; | 
|  | } | 
|  |  | 
|  | int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, | 
|  | struct sta_info **sta_out) | 
|  | { | 
|  | struct sta_info *sta; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | sta = rcu_dereference(sdata->u.vlan.sta); | 
|  | if (sta) { | 
|  | *sta_out = sta; | 
|  | return 0; | 
|  | } else if (sdata->wdev.use_4addr) { | 
|  | return -ENOLINK; | 
|  | } | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | if (is_multicast_ether_addr(skb->data)) { | 
|  | *sta_out = ERR_PTR(-ENOENT); | 
|  | return 0; | 
|  | } | 
|  | sta = sta_info_get_bss(sdata, skb->data); | 
|  | break; | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | /* determined much later */ | 
|  | *sta_out = NULL; | 
|  | return 0; | 
|  | #endif | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { | 
|  | sta = sta_info_get(sdata, skb->data); | 
|  | if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | if (test_sta_flag(sta, | 
|  | WLAN_STA_TDLS_PEER_AUTH)) { | 
|  | *sta_out = sta; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TDLS link during setup - throw out frames to | 
|  | * peer. Allow TDLS-setup frames to unauthorized | 
|  | * peers for the special case of a link teardown | 
|  | * after a TDLS sta is removed due to being | 
|  | * unreachable. | 
|  | */ | 
|  | if (!ieee80211_is_tdls_setup(skb)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr); | 
|  | if (!sta) | 
|  | return -ENOLINK; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | *sta_out = sta ?: ERR_PTR(-ENOENT); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 ieee80211_store_ack_skb(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, | 
|  | u32 *info_flags, | 
|  | u64 *cookie) | 
|  | { | 
|  | struct sk_buff *ack_skb; | 
|  | u16 info_id = 0; | 
|  |  | 
|  | if (skb->sk) | 
|  | ack_skb = skb_clone_sk(skb); | 
|  | else | 
|  | ack_skb = skb_clone(skb, GFP_ATOMIC); | 
|  |  | 
|  | if (ack_skb) { | 
|  | unsigned long flags; | 
|  | int id; | 
|  |  | 
|  | spin_lock_irqsave(&local->ack_status_lock, flags); | 
|  | id = idr_alloc(&local->ack_status_frames, ack_skb, | 
|  | 1, 0x2000, GFP_ATOMIC); | 
|  | spin_unlock_irqrestore(&local->ack_status_lock, flags); | 
|  |  | 
|  | if (id >= 0) { | 
|  | info_id = id; | 
|  | *info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
|  | if (cookie) { | 
|  | *cookie = ieee80211_mgmt_tx_cookie(local); | 
|  | IEEE80211_SKB_CB(ack_skb)->ack.cookie = *cookie; | 
|  | } | 
|  | } else { | 
|  | kfree_skb(ack_skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | return info_id; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_build_hdr - build 802.11 header in the given frame | 
|  | * @sdata: virtual interface to build the header for | 
|  | * @skb: the skb to build the header in | 
|  | * @info_flags: skb flags to set | 
|  | * @sta: the station pointer | 
|  | * @ctrl_flags: info control flags to set | 
|  | * @cookie: cookie pointer to fill (if not %NULL) | 
|  | * | 
|  | * This function takes the skb with 802.3 header and reformats the header to | 
|  | * the appropriate IEEE 802.11 header based on which interface the packet is | 
|  | * being transmitted on. | 
|  | * | 
|  | * Note that this function also takes care of the TX status request and | 
|  | * potential unsharing of the SKB - this needs to be interleaved with the | 
|  | * header building. | 
|  | * | 
|  | * The function requires the read-side RCU lock held | 
|  | * | 
|  | * Returns: the (possibly reallocated) skb or an ERR_PTR() code | 
|  | */ | 
|  | static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, u32 info_flags, | 
|  | struct sta_info *sta, u32 ctrl_flags, | 
|  | u64 *cookie) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_info *info; | 
|  | int head_need; | 
|  | u16 ethertype, hdrlen,  meshhdrlen = 0; | 
|  | __le16 fc; | 
|  | struct ieee80211_hdr hdr; | 
|  | struct ieee80211s_hdr mesh_hdr __maybe_unused; | 
|  | struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL; | 
|  | const u8 *encaps_data; | 
|  | int encaps_len, skip_header_bytes; | 
|  | bool wme_sta = false, authorized = false; | 
|  | bool tdls_peer; | 
|  | bool multicast; | 
|  | u16 info_id = 0; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf = NULL; | 
|  | enum nl80211_band band; | 
|  | int ret; | 
|  | u8 link_id = u32_get_bits(ctrl_flags, IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | if (IS_ERR(sta)) | 
|  | sta = NULL; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | if (local->force_tx_status) | 
|  | info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
|  | #endif | 
|  |  | 
|  | /* convert Ethernet header to proper 802.11 header (based on | 
|  | * operation mode) */ | 
|  | ethertype = (skb->data[12] << 8) | skb->data[13]; | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | 
|  |  | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) | 
|  | chanctx_conf = | 
|  | rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | if (sdata->wdev.use_4addr) { | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN); | 
|  | memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | hdrlen = 30; | 
|  | authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | 
|  | wme_sta = sta->sta.wme; | 
|  | } | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | struct ieee80211_sub_if_data *ap_sdata; | 
|  |  | 
|  | /* override chanctx_conf from AP (we don't have one) */ | 
|  | ap_sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, | 
|  | u.ap); | 
|  | chanctx_conf = | 
|  | rcu_dereference(ap_sdata->vif.bss_conf.chanctx_conf); | 
|  | } | 
|  | if (sdata->wdev.use_4addr) | 
|  | break; | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_AP: | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | /* DA BSSID SA */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  |  | 
|  | if (ieee80211_vif_is_mld(&sdata->vif) && sta && !sta->sta.mlo) { | 
|  | struct ieee80211_link_data *link; | 
|  |  | 
|  | link_id = sta->deflink.link_id; | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (WARN_ON(!link)) { | 
|  | ret = -ENOLINK; | 
|  | goto free; | 
|  | } | 
|  | memcpy(hdr.addr2, link->conf->addr, ETH_ALEN); | 
|  | } else if (link_id == IEEE80211_LINK_UNSPECIFIED || | 
|  | (sta && sta->sta.mlo)) { | 
|  | memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
|  | } else { | 
|  | struct ieee80211_bss_conf *conf; | 
|  |  | 
|  | conf = rcu_dereference(sdata->vif.link_conf[link_id]); | 
|  | if (unlikely(!conf)) { | 
|  | ret = -ENOLINK; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | memcpy(hdr.addr2, conf->addr, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!is_multicast_ether_addr(skb->data)) { | 
|  | struct sta_info *next_hop; | 
|  | bool mpp_lookup = true; | 
|  |  | 
|  | mpath = mesh_path_lookup(sdata, skb->data); | 
|  | if (mpath) { | 
|  | mpp_lookup = false; | 
|  | next_hop = rcu_dereference(mpath->next_hop); | 
|  | if (!next_hop || | 
|  | !(mpath->flags & (MESH_PATH_ACTIVE | | 
|  | MESH_PATH_RESOLVING))) | 
|  | mpp_lookup = true; | 
|  | } | 
|  |  | 
|  | if (mpp_lookup) { | 
|  | mppath = mpp_path_lookup(sdata, skb->data); | 
|  | if (mppath) | 
|  | mppath->exp_time = jiffies; | 
|  | } | 
|  |  | 
|  | if (mppath && mpath) | 
|  | mesh_path_del(sdata, mpath->dst); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Use address extension if it is a packet from | 
|  | * another interface or if we know the destination | 
|  | * is being proxied by a portal (i.e. portal address | 
|  | * differs from proxied address) | 
|  | */ | 
|  | if (ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN) && | 
|  | !(mppath && !ether_addr_equal(mppath->mpp, skb->data))) { | 
|  | hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | 
|  | skb->data, skb->data + ETH_ALEN); | 
|  | meshhdrlen = ieee80211_new_mesh_header(sdata, &mesh_hdr, | 
|  | NULL, NULL); | 
|  | } else { | 
|  | /* DS -> MBSS (802.11-2012 13.11.3.3). | 
|  | * For unicast with unknown forwarding information, | 
|  | * destination might be in the MBSS or if that fails | 
|  | * forwarded to another mesh gate. In either case | 
|  | * resolution will be handled in ieee80211_xmit(), so | 
|  | * leave the original DA. This also works for mcast */ | 
|  | const u8 *mesh_da = skb->data; | 
|  |  | 
|  | if (mppath) | 
|  | mesh_da = mppath->mpp; | 
|  | else if (mpath) | 
|  | mesh_da = mpath->dst; | 
|  |  | 
|  | hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | 
|  | mesh_da, sdata->vif.addr); | 
|  | if (is_multicast_ether_addr(mesh_da)) | 
|  | /* DA TA mSA AE:SA */ | 
|  | meshhdrlen = ieee80211_new_mesh_header( | 
|  | sdata, &mesh_hdr, | 
|  | skb->data + ETH_ALEN, NULL); | 
|  | else | 
|  | /* RA TA mDA mSA AE:DA SA */ | 
|  | meshhdrlen = ieee80211_new_mesh_header( | 
|  | sdata, &mesh_hdr, skb->data, | 
|  | skb->data + ETH_ALEN); | 
|  |  | 
|  | } | 
|  |  | 
|  | /* For injected frames, fill RA right away as nexthop lookup | 
|  | * will be skipped. | 
|  | */ | 
|  | if ((ctrl_flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) && | 
|  | is_zero_ether_addr(hdr.addr1)) | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | break; | 
|  | #endif | 
|  | case NL80211_IFTYPE_STATION: | 
|  | /* we already did checks when looking up the RA STA */ | 
|  | tdls_peer = test_sta_flag(sta, WLAN_STA_TDLS_PEER); | 
|  |  | 
|  | if (tdls_peer) { | 
|  | /* For TDLS only one link can be valid with peer STA */ | 
|  | int tdls_link_id = ieee80211_tdls_sta_link_id(sta); | 
|  | struct ieee80211_link_data *link; | 
|  |  | 
|  | /* DA SA BSSID */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | link = rcu_dereference(sdata->link[tdls_link_id]); | 
|  | if (WARN_ON_ONCE(!link)) { | 
|  | ret = -EINVAL; | 
|  | goto free; | 
|  | } | 
|  | memcpy(hdr.addr3, link->u.mgd.bssid, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | }  else if (sdata->u.mgd.use_4addr && | 
|  | cpu_to_be16(ethertype) != sdata->control_port_protocol) { | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
|  | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | memcpy(hdr.addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | hdrlen = 30; | 
|  | } else { | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | 
|  | /* BSSID SA DA */ | 
|  | memcpy(hdr.addr1, sdata->vif.cfg.ap_addr, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | /* DA SA BSSID */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | eth_broadcast_addr(hdr.addr3); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* DA SA BSSID */ | 
|  | memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
|  | memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
|  | memcpy(hdr.addr3, sdata->u.ibss.bssid, ETH_ALEN); | 
|  | hdrlen = 24; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | if (!chanctx_conf) { | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | ret = -ENOTCONN; | 
|  | goto free; | 
|  | } | 
|  | /* MLD transmissions must not rely on the band */ | 
|  | band = 0; | 
|  | } else { | 
|  | band = chanctx_conf->def.chan->band; | 
|  | } | 
|  |  | 
|  | multicast = is_multicast_ether_addr(hdr.addr1); | 
|  |  | 
|  | /* sta is always NULL for mesh */ | 
|  | if (sta) { | 
|  | authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | 
|  | wme_sta = sta->sta.wme; | 
|  | } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | /* For mesh, the use of the QoS header is mandatory */ | 
|  | wme_sta = true; | 
|  | } | 
|  |  | 
|  | /* receiver does QoS (which also means we do) use it */ | 
|  | if (wme_sta) { | 
|  | fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
|  | hdrlen += 2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Drop unicast frames to unauthorised stations unless they are | 
|  | * EAPOL frames from the local station. | 
|  | */ | 
|  | if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) && | 
|  | (sdata->vif.type != NL80211_IFTYPE_OCB) && | 
|  | !multicast && !authorized && | 
|  | (cpu_to_be16(ethertype) != sdata->control_port_protocol || | 
|  | !ieee80211_is_our_addr(sdata, skb->data + ETH_ALEN, NULL)))) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n", | 
|  | sdata->name, hdr.addr1); | 
|  | #endif | 
|  |  | 
|  | I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); | 
|  |  | 
|  | ret = -EPERM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | if (unlikely(!multicast && | 
|  | (sk_requests_wifi_status(skb->sk) || | 
|  | ctrl_flags & IEEE80211_TX_CTL_REQ_TX_STATUS))) | 
|  | info_id = ieee80211_store_ack_skb(local, skb, &info_flags, | 
|  | cookie); | 
|  |  | 
|  | /* | 
|  | * If the skb is shared we need to obtain our own copy. | 
|  | */ | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb)) { | 
|  | ret = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | hdr.frame_control = fc; | 
|  | hdr.duration_id = 0; | 
|  | hdr.seq_ctrl = 0; | 
|  |  | 
|  | skip_header_bytes = ETH_HLEN; | 
|  | if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | 
|  | encaps_data = bridge_tunnel_header; | 
|  | encaps_len = sizeof(bridge_tunnel_header); | 
|  | skip_header_bytes -= 2; | 
|  | } else if (ethertype >= ETH_P_802_3_MIN) { | 
|  | encaps_data = rfc1042_header; | 
|  | encaps_len = sizeof(rfc1042_header); | 
|  | skip_header_bytes -= 2; | 
|  | } else { | 
|  | encaps_data = NULL; | 
|  | encaps_len = 0; | 
|  | } | 
|  |  | 
|  | skb_pull(skb, skip_header_bytes); | 
|  | head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); | 
|  |  | 
|  | /* | 
|  | * So we need to modify the skb header and hence need a copy of | 
|  | * that. The head_need variable above doesn't, so far, include | 
|  | * the needed header space that we don't need right away. If we | 
|  | * can, then we don't reallocate right now but only after the | 
|  | * frame arrives at the master device (if it does...) | 
|  | * | 
|  | * If we cannot, however, then we will reallocate to include all | 
|  | * the ever needed space. Also, if we need to reallocate it anyway, | 
|  | * make it big enough for everything we may ever need. | 
|  | */ | 
|  |  | 
|  | if (head_need > 0 || skb_cloned(skb)) { | 
|  | head_need += IEEE80211_ENCRYPT_HEADROOM; | 
|  | head_need += local->tx_headroom; | 
|  | head_need = max_t(int, 0, head_need); | 
|  | if (ieee80211_skb_resize(sdata, skb, head_need, ENCRYPT_DATA)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | skb = NULL; | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (encaps_data) | 
|  | memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | if (meshhdrlen > 0) | 
|  | memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); | 
|  | #endif | 
|  |  | 
|  | if (ieee80211_is_data_qos(fc)) { | 
|  | __le16 *qos_control; | 
|  |  | 
|  | qos_control = skb_push(skb, 2); | 
|  | memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | 
|  | /* | 
|  | * Maybe we could actually set some fields here, for now just | 
|  | * initialise to zero to indicate no special operation. | 
|  | */ | 
|  | *qos_control = 0; | 
|  | } else | 
|  | memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | 
|  |  | 
|  | skb_reset_mac_header(skb); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | memset(info, 0, sizeof(*info)); | 
|  |  | 
|  | info->flags = info_flags; | 
|  | if (info_id) { | 
|  | info->status_data = info_id; | 
|  | info->status_data_idr = 1; | 
|  | } | 
|  | info->band = band; | 
|  |  | 
|  | if (likely(!cookie)) { | 
|  | ctrl_flags |= u32_encode_bits(link_id, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  | } else { | 
|  | unsigned int pre_conf_link_id; | 
|  |  | 
|  | /* | 
|  | * ctrl_flags already have been set by | 
|  | * ieee80211_tx_control_port(), here | 
|  | * we just sanity check that | 
|  | */ | 
|  |  | 
|  | pre_conf_link_id = u32_get_bits(ctrl_flags, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | if (pre_conf_link_id != link_id && | 
|  | link_id != IEEE80211_LINK_UNSPECIFIED) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | net_info_ratelimited("%s: dropped frame to %pM with bad link ID request (%d vs. %d)\n", | 
|  | sdata->name, hdr.addr1, | 
|  | pre_conf_link_id, link_id); | 
|  | #endif | 
|  | ret = -EINVAL; | 
|  | goto free; | 
|  | } | 
|  | } | 
|  |  | 
|  | info->control.flags = ctrl_flags; | 
|  |  | 
|  | return skb; | 
|  | free: | 
|  | kfree_skb(skb); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * fast-xmit overview | 
|  | * | 
|  | * The core idea of this fast-xmit is to remove per-packet checks by checking | 
|  | * them out of band. ieee80211_check_fast_xmit() implements the out-of-band | 
|  | * checks that are needed to get the sta->fast_tx pointer assigned, after which | 
|  | * much less work can be done per packet. For example, fragmentation must be | 
|  | * disabled or the fast_tx pointer will not be set. All the conditions are seen | 
|  | * in the code here. | 
|  | * | 
|  | * Once assigned, the fast_tx data structure also caches the per-packet 802.11 | 
|  | * header and other data to aid packet processing in ieee80211_xmit_fast(). | 
|  | * | 
|  | * The most difficult part of this is that when any of these assumptions | 
|  | * change, an external trigger (i.e. a call to ieee80211_clear_fast_xmit(), | 
|  | * ieee80211_check_fast_xmit() or friends) is required to reset the data, | 
|  | * since the per-packet code no longer checks the conditions. This is reflected | 
|  | * by the calls to these functions throughout the rest of the code, and must be | 
|  | * maintained if any of the TX path checks change. | 
|  | */ | 
|  |  | 
|  | void ieee80211_check_fast_xmit(struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_fast_tx build = {}, *fast_tx = NULL, *old; | 
|  | struct ieee80211_local *local = sta->local; | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | struct ieee80211_hdr *hdr = (void *)build.hdr; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | __le16 fc; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT)) | 
|  | return; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | mesh_fast_tx_flush_sta(sdata, sta); | 
|  |  | 
|  | /* Locking here protects both the pointer itself, and against concurrent | 
|  | * invocations winning data access races to, e.g., the key pointer that | 
|  | * is used. | 
|  | * Without it, the invocation of this function right after the key | 
|  | * pointer changes wouldn't be sufficient, as another CPU could access | 
|  | * the pointer, then stall, and then do the cache update after the CPU | 
|  | * that invalidated the key. | 
|  | * With the locking, such scenarios cannot happen as the check for the | 
|  | * key and the fast-tx assignment are done atomically, so the CPU that | 
|  | * modifies the key will either wait or other one will see the key | 
|  | * cleared/changed already. | 
|  | */ | 
|  | spin_lock_bh(&sta->lock); | 
|  | if (ieee80211_hw_check(&local->hw, SUPPORTS_PS) && | 
|  | !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS) && | 
|  | sdata->vif.type == NL80211_IFTYPE_STATION) | 
|  | goto out; | 
|  |  | 
|  | if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED) || !sta->uploaded) | 
|  | goto out; | 
|  |  | 
|  | if (test_sta_flag(sta, WLAN_STA_PS_STA) || | 
|  | test_sta_flag(sta, WLAN_STA_PS_DRIVER) || | 
|  | test_sta_flag(sta, WLAN_STA_PS_DELIVER) || | 
|  | test_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT)) | 
|  | goto out; | 
|  |  | 
|  | if (sdata->noack_map) | 
|  | goto out; | 
|  |  | 
|  | /* fast-xmit doesn't handle fragmentation at all */ | 
|  | if (local->hw.wiphy->frag_threshold != (u32)-1 && | 
|  | !ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG)) | 
|  | goto out; | 
|  |  | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = | 
|  | rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  | if (!chanctx_conf) { | 
|  | rcu_read_unlock(); | 
|  | goto out; | 
|  | } | 
|  | build.band = chanctx_conf->def.chan->band; | 
|  | rcu_read_unlock(); | 
|  | } else { | 
|  | /* MLD transmissions must not rely on the band */ | 
|  | build.band = 0; | 
|  | } | 
|  |  | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* DA SA BSSID */ | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr1); | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | 
|  | memcpy(hdr->addr3, sdata->u.ibss.bssid, ETH_ALEN); | 
|  | build.hdr_len = 24; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | /* For TDLS only one link can be valid with peer STA */ | 
|  | int tdls_link_id = ieee80211_tdls_sta_link_id(sta); | 
|  | struct ieee80211_link_data *link; | 
|  |  | 
|  | /* DA SA BSSID */ | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr1); | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | 
|  | rcu_read_lock(); | 
|  | link = rcu_dereference(sdata->link[tdls_link_id]); | 
|  | if (!WARN_ON_ONCE(!link)) | 
|  | memcpy(hdr->addr3, link->u.mgd.bssid, ETH_ALEN); | 
|  | rcu_read_unlock(); | 
|  | build.hdr_len = 24; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (sdata->u.mgd.use_4addr) { | 
|  | /* non-regular ethertype cannot use the fastpath */ | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
|  | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | memcpy(hdr->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr4); | 
|  | build.hdr_len = 30; | 
|  | break; | 
|  | } | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | 
|  | /* BSSID SA DA */ | 
|  | memcpy(hdr->addr1, sdata->vif.cfg.ap_addr, ETH_ALEN); | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | 
|  | build.hdr_len = 24; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | if (sdata->wdev.use_4addr) { | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
|  | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); | 
|  | memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr3); | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr4); | 
|  | build.hdr_len = 30; | 
|  | break; | 
|  | } | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_AP: | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | /* DA BSSID SA */ | 
|  | build.da_offs = offsetof(struct ieee80211_hdr, addr1); | 
|  | if (sta->sta.mlo || !ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | 
|  | } else { | 
|  | unsigned int link_id = sta->deflink.link_id; | 
|  | struct ieee80211_link_data *link; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (WARN_ON(!link)) { | 
|  | rcu_read_unlock(); | 
|  | goto out; | 
|  | } | 
|  | memcpy(hdr->addr2, link->conf->addr, ETH_ALEN); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | build.sa_offs = offsetof(struct ieee80211_hdr, addr3); | 
|  | build.hdr_len = 24; | 
|  | break; | 
|  | default: | 
|  | /* not handled on fast-xmit */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (sta->sta.wme) { | 
|  | build.hdr_len += 2; | 
|  | fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
|  | } | 
|  |  | 
|  | /* We store the key here so there's no point in using rcu_dereference() | 
|  | * but that's fine because the code that changes the pointers will call | 
|  | * this function after doing so. For a single CPU that would be enough, | 
|  | * for multiple see the comment above. | 
|  | */ | 
|  | build.key = rcu_access_pointer(sta->ptk[sta->ptk_idx]); | 
|  | if (!build.key) | 
|  | build.key = rcu_access_pointer(sdata->default_unicast_key); | 
|  | if (build.key) { | 
|  | bool gen_iv, iv_spc, mmic; | 
|  |  | 
|  | gen_iv = build.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | iv_spc = build.key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE; | 
|  | mmic = build.key->conf.flags & | 
|  | (IEEE80211_KEY_FLAG_GENERATE_MMIC | | 
|  | IEEE80211_KEY_FLAG_PUT_MIC_SPACE); | 
|  |  | 
|  | /* don't handle software crypto */ | 
|  | if (!(build.key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | 
|  | goto out; | 
|  |  | 
|  | /* Key is being removed */ | 
|  | if (build.key->flags & KEY_FLAG_TAINTED) | 
|  | goto out; | 
|  |  | 
|  | switch (build.key->conf.cipher) { | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | if (gen_iv) | 
|  | build.pn_offs = build.hdr_len; | 
|  | if (gen_iv || iv_spc) | 
|  | build.hdr_len += IEEE80211_CCMP_HDR_LEN; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | if (gen_iv) | 
|  | build.pn_offs = build.hdr_len; | 
|  | if (gen_iv || iv_spc) | 
|  | build.hdr_len += IEEE80211_GCMP_HDR_LEN; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | /* cannot handle MMIC or IV generation in xmit-fast */ | 
|  | if (mmic || gen_iv) | 
|  | goto out; | 
|  | if (iv_spc) | 
|  | build.hdr_len += IEEE80211_TKIP_IV_LEN; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | /* cannot handle IV generation in fast-xmit */ | 
|  | if (gen_iv) | 
|  | goto out; | 
|  | if (iv_spc) | 
|  | build.hdr_len += IEEE80211_WEP_IV_LEN; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | WARN(1, | 
|  | "management cipher suite 0x%x enabled for data\n", | 
|  | build.key->conf.cipher); | 
|  | goto out; | 
|  | default: | 
|  | /* we don't know how to generate IVs for this at all */ | 
|  | if (WARN_ON(gen_iv)) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); | 
|  | } | 
|  |  | 
|  | hdr->frame_control = fc; | 
|  |  | 
|  | memcpy(build.hdr + build.hdr_len, | 
|  | rfc1042_header,  sizeof(rfc1042_header)); | 
|  | build.hdr_len += sizeof(rfc1042_header); | 
|  |  | 
|  | fast_tx = kmemdup(&build, sizeof(build), GFP_ATOMIC); | 
|  | /* if the kmemdup fails, continue w/o fast_tx */ | 
|  |  | 
|  | out: | 
|  | /* we might have raced against another call to this function */ | 
|  | old = rcu_dereference_protected(sta->fast_tx, | 
|  | lockdep_is_held(&sta->lock)); | 
|  | rcu_assign_pointer(sta->fast_tx, fast_tx); | 
|  | if (old) | 
|  | kfree_rcu(old, rcu_head); | 
|  | spin_unlock_bh(&sta->lock); | 
|  | } | 
|  |  | 
|  | void ieee80211_check_fast_xmit_all(struct ieee80211_local *local) | 
|  | { | 
|  | struct sta_info *sta; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) | 
|  | ieee80211_check_fast_xmit(sta); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
|  | if (sdata != sta->sdata && | 
|  | (!sta->sdata->bss || sta->sdata->bss != sdata->bss)) | 
|  | continue; | 
|  | ieee80211_check_fast_xmit(sta); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | void ieee80211_clear_fast_xmit(struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_fast_tx *fast_tx; | 
|  |  | 
|  | spin_lock_bh(&sta->lock); | 
|  | fast_tx = rcu_dereference_protected(sta->fast_tx, | 
|  | lockdep_is_held(&sta->lock)); | 
|  | RCU_INIT_POINTER(sta->fast_tx, NULL); | 
|  | spin_unlock_bh(&sta->lock); | 
|  |  | 
|  | if (fast_tx) | 
|  | kfree_rcu(fast_tx, rcu_head); | 
|  | } | 
|  |  | 
|  | static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, int headroom) | 
|  | { | 
|  | if (skb_headroom(skb) < headroom) { | 
|  | I802_DEBUG_INC(local->tx_expand_skb_head); | 
|  |  | 
|  | if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "failed to reallocate TX buffer\n"); | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_fast_tx *fast_tx, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ethhdr *amsdu_hdr; | 
|  | int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header); | 
|  | int subframe_len = skb->len - hdr_len; | 
|  | void *data; | 
|  | u8 *qc, *h_80211_src, *h_80211_dst; | 
|  | const u8 *bssid; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) | 
|  | return false; | 
|  |  | 
|  | if (info->control.flags & IEEE80211_TX_CTRL_AMSDU) | 
|  | return true; | 
|  |  | 
|  | if (!ieee80211_amsdu_realloc_pad(local, skb, | 
|  | sizeof(*amsdu_hdr) + | 
|  | local->hw.extra_tx_headroom)) | 
|  | return false; | 
|  |  | 
|  | data = skb_push(skb, sizeof(*amsdu_hdr)); | 
|  | memmove(data, data + sizeof(*amsdu_hdr), hdr_len); | 
|  | hdr = data; | 
|  | amsdu_hdr = data + hdr_len; | 
|  | /* h_80211_src/dst is addr* field within hdr */ | 
|  | h_80211_src = data + fast_tx->sa_offs; | 
|  | h_80211_dst = data + fast_tx->da_offs; | 
|  |  | 
|  | amsdu_hdr->h_proto = cpu_to_be16(subframe_len); | 
|  | ether_addr_copy(amsdu_hdr->h_source, h_80211_src); | 
|  | ether_addr_copy(amsdu_hdr->h_dest, h_80211_dst); | 
|  |  | 
|  | /* according to IEEE 802.11-2012 8.3.2 table 8-19, the outer SA/DA | 
|  | * fields needs to be changed to BSSID for A-MSDU frames depending | 
|  | * on FromDS/ToDS values. | 
|  | */ | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | bssid = sdata->vif.cfg.ap_addr; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | bssid = sdata->vif.addr; | 
|  | break; | 
|  | default: | 
|  | bssid = NULL; | 
|  | } | 
|  |  | 
|  | if (bssid && ieee80211_has_fromds(hdr->frame_control)) | 
|  | ether_addr_copy(h_80211_src, bssid); | 
|  |  | 
|  | if (bssid && ieee80211_has_tods(hdr->frame_control)) | 
|  | ether_addr_copy(h_80211_dst, bssid); | 
|  |  | 
|  | qc = ieee80211_get_qos_ctl(hdr); | 
|  | *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT; | 
|  |  | 
|  | info->control.flags |= IEEE80211_TX_CTRL_AMSDU; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, | 
|  | struct ieee80211_fast_tx *fast_tx, | 
|  | struct sk_buff *skb, | 
|  | const u8 *da, const u8 *sa) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct fq *fq = &local->fq; | 
|  | struct fq_tin *tin; | 
|  | struct fq_flow *flow; | 
|  | u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  | struct ieee80211_txq *txq = sta->sta.txq[tid]; | 
|  | struct txq_info *txqi; | 
|  | struct sk_buff **frag_tail, *head; | 
|  | int subframe_len = skb->len - ETH_ALEN; | 
|  | u8 max_subframes = sta->sta.max_amsdu_subframes; | 
|  | int max_frags = local->hw.max_tx_fragments; | 
|  | int max_amsdu_len = sta->sta.cur->max_amsdu_len; | 
|  | int orig_truesize; | 
|  | u32 flow_idx; | 
|  | __be16 len; | 
|  | void *data; | 
|  | bool ret = false; | 
|  | unsigned int orig_len; | 
|  | int n = 2, nfrags, pad = 0; | 
|  | u16 hdrlen; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, TX_AMSDU)) | 
|  | return false; | 
|  |  | 
|  | if (sdata->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED) | 
|  | return false; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | return false; | 
|  |  | 
|  | if (skb_is_gso(skb)) | 
|  | return false; | 
|  |  | 
|  | if (!txq) | 
|  | return false; | 
|  |  | 
|  | txqi = to_txq_info(txq); | 
|  | if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags)) | 
|  | return false; | 
|  |  | 
|  | if (sta->sta.cur->max_rc_amsdu_len) | 
|  | max_amsdu_len = min_t(int, max_amsdu_len, | 
|  | sta->sta.cur->max_rc_amsdu_len); | 
|  |  | 
|  | if (sta->sta.cur->max_tid_amsdu_len[tid]) | 
|  | max_amsdu_len = min_t(int, max_amsdu_len, | 
|  | sta->sta.cur->max_tid_amsdu_len[tid]); | 
|  |  | 
|  | flow_idx = fq_flow_idx(fq, skb); | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  |  | 
|  | /* TODO: Ideally aggregation should be done on dequeue to remain | 
|  | * responsive to environment changes. | 
|  | */ | 
|  |  | 
|  | tin = &txqi->tin; | 
|  | flow = fq_flow_classify(fq, tin, flow_idx, skb); | 
|  | head = skb_peek_tail(&flow->queue); | 
|  | if (!head || skb_is_gso(head)) | 
|  | goto out; | 
|  |  | 
|  | orig_truesize = head->truesize; | 
|  | orig_len = head->len; | 
|  |  | 
|  | if (skb->len + head->len > max_amsdu_len) | 
|  | goto out; | 
|  |  | 
|  | nfrags = 1 + skb_shinfo(skb)->nr_frags; | 
|  | nfrags += 1 + skb_shinfo(head)->nr_frags; | 
|  | frag_tail = &skb_shinfo(head)->frag_list; | 
|  | while (*frag_tail) { | 
|  | nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags; | 
|  | frag_tail = &(*frag_tail)->next; | 
|  | n++; | 
|  | } | 
|  |  | 
|  | if (max_subframes && n > max_subframes) | 
|  | goto out; | 
|  |  | 
|  | if (max_frags && nfrags > max_frags) | 
|  | goto out; | 
|  |  | 
|  | if (!drv_can_aggregate_in_amsdu(local, head, skb)) | 
|  | goto out; | 
|  |  | 
|  | if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) | 
|  | goto out; | 
|  |  | 
|  | /* If n == 2, the "while (*frag_tail)" loop above didn't execute | 
|  | * and  frag_tail should be &skb_shinfo(head)->frag_list. | 
|  | * However, ieee80211_amsdu_prepare_head() can reallocate it. | 
|  | * Reload frag_tail to have it pointing to the correct place. | 
|  | */ | 
|  | if (n == 2) | 
|  | frag_tail = &skb_shinfo(head)->frag_list; | 
|  |  | 
|  | /* | 
|  | * Pad out the previous subframe to a multiple of 4 by adding the | 
|  | * padding to the next one, that's being added. Note that head->len | 
|  | * is the length of the full A-MSDU, but that works since each time | 
|  | * we add a new subframe we pad out the previous one to a multiple | 
|  | * of 4 and thus it no longer matters in the next round. | 
|  | */ | 
|  | hdrlen = fast_tx->hdr_len - sizeof(rfc1042_header); | 
|  | if ((head->len - hdrlen) & 3) | 
|  | pad = 4 - ((head->len - hdrlen) & 3); | 
|  |  | 
|  | if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + | 
|  | 2 + pad)) | 
|  | goto out_recalc; | 
|  |  | 
|  | ret = true; | 
|  | data = skb_push(skb, ETH_ALEN + 2); | 
|  | ether_addr_copy(data, da); | 
|  | ether_addr_copy(data + ETH_ALEN, sa); | 
|  |  | 
|  | data += 2 * ETH_ALEN; | 
|  | len = cpu_to_be16(subframe_len); | 
|  | memcpy(data, &len, 2); | 
|  | memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header)); | 
|  |  | 
|  | memset(skb_push(skb, pad), 0, pad); | 
|  |  | 
|  | head->len += skb->len; | 
|  | head->data_len += skb->len; | 
|  | *frag_tail = skb; | 
|  |  | 
|  | out_recalc: | 
|  | fq->memory_usage += head->truesize - orig_truesize; | 
|  | if (head->len != orig_len) { | 
|  | flow->backlog += head->len - orig_len; | 
|  | tin->backlog_bytes += head->len - orig_len; | 
|  | } | 
|  | out: | 
|  | spin_unlock_bh(&fq->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Can be called while the sta lock is held. Anything that can cause packets to | 
|  | * be generated will cause deadlock! | 
|  | */ | 
|  | static ieee80211_tx_result | 
|  | ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, u8 pn_offs, | 
|  | struct ieee80211_key *key, | 
|  | struct ieee80211_tx_data *tx) | 
|  | { | 
|  | struct sk_buff *skb = tx->skb; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | u8 tid = IEEE80211_NUM_TIDS; | 
|  |  | 
|  | if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL) && | 
|  | ieee80211_tx_h_rate_ctrl(tx) != TX_CONTINUE) | 
|  | return TX_DROP; | 
|  |  | 
|  | if (key) | 
|  | info->control.hw_key = &key->conf; | 
|  |  | 
|  | dev_sw_netstats_tx_add(skb->dev, 1, skb->len); | 
|  |  | 
|  | if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | 
|  | tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  | hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid); | 
|  | } else { | 
|  | info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | 
|  | hdr->seq_ctrl = cpu_to_le16(sdata->sequence_number); | 
|  | sdata->sequence_number += 0x10; | 
|  | } | 
|  |  | 
|  | if (skb_shinfo(skb)->gso_size) | 
|  | sta->deflink.tx_stats.msdu[tid] += | 
|  | DIV_ROUND_UP(skb->len, skb_shinfo(skb)->gso_size); | 
|  | else | 
|  | sta->deflink.tx_stats.msdu[tid]++; | 
|  |  | 
|  | info->hw_queue = sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; | 
|  |  | 
|  | /* statistics normally done by ieee80211_tx_h_stats (but that | 
|  | * has to consider fragmentation, so is more complex) | 
|  | */ | 
|  | sta->deflink.tx_stats.bytes[skb_get_queue_mapping(skb)] += skb->len; | 
|  | sta->deflink.tx_stats.packets[skb_get_queue_mapping(skb)]++; | 
|  |  | 
|  | if (pn_offs) { | 
|  | u64 pn; | 
|  | u8 *crypto_hdr = skb->data + pn_offs; | 
|  |  | 
|  | switch (key->conf.cipher) { | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | pn = atomic64_inc_return(&key->conf.tx_pn); | 
|  | crypto_hdr[0] = pn; | 
|  | crypto_hdr[1] = pn >> 8; | 
|  | crypto_hdr[3] = 0x20 | (key->conf.keyidx << 6); | 
|  | crypto_hdr[4] = pn >> 16; | 
|  | crypto_hdr[5] = pn >> 24; | 
|  | crypto_hdr[6] = pn >> 32; | 
|  | crypto_hdr[7] = pn >> 40; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return TX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static netdev_features_t | 
|  | ieee80211_sdata_netdev_features(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN) | 
|  | return sdata->vif.netdev_features; | 
|  |  | 
|  | if (!sdata->bss) | 
|  | return 0; | 
|  |  | 
|  | sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); | 
|  | return sdata->vif.netdev_features; | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | ieee80211_tx_skb_fixup(struct sk_buff *skb, netdev_features_t features) | 
|  | { | 
|  | if (skb_is_gso(skb)) { | 
|  | struct sk_buff *segs; | 
|  |  | 
|  | segs = skb_gso_segment(skb, features); | 
|  | if (!segs) | 
|  | return skb; | 
|  | if (IS_ERR(segs)) | 
|  | goto free; | 
|  |  | 
|  | consume_skb(skb); | 
|  | return segs; | 
|  | } | 
|  |  | 
|  | if (skb_needs_linearize(skb, features) && __skb_linearize(skb)) | 
|  | goto free; | 
|  |  | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) { | 
|  | int ofs = skb_checksum_start_offset(skb); | 
|  |  | 
|  | if (skb->encapsulation) | 
|  | skb_set_inner_transport_header(skb, ofs); | 
|  | else | 
|  | skb_set_transport_header(skb, ofs); | 
|  |  | 
|  | if (skb_csum_hwoffload_help(skb, features)) | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | skb_mark_not_on_list(skb); | 
|  | return skb; | 
|  |  | 
|  | free: | 
|  | kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void __ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, | 
|  | struct ieee80211_fast_tx *fast_tx, | 
|  | struct sk_buff *skb, bool ampdu, | 
|  | const u8 *da, const u8 *sa) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_hdr *hdr = (void *)fast_tx->hdr; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_tx_data tx; | 
|  | ieee80211_tx_result r; | 
|  | int hw_headroom = sdata->local->hw.extra_tx_headroom; | 
|  | int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2); | 
|  |  | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb)) | 
|  | return; | 
|  |  | 
|  | if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) && | 
|  | ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb, da, sa)) | 
|  | return; | 
|  |  | 
|  | /* will not be crypto-handled beyond what we do here, so use false | 
|  | * as the may-encrypt argument for the resize to not account for | 
|  | * more room than we already have in 'extra_head' | 
|  | */ | 
|  | if (unlikely(ieee80211_skb_resize(sdata, skb, | 
|  | max_t(int, extra_head + hw_headroom - | 
|  | skb_headroom(skb), 0), | 
|  | ENCRYPT_NO))) | 
|  | goto free; | 
|  |  | 
|  | hdr = skb_push(skb, extra_head); | 
|  | memcpy(skb->data, fast_tx->hdr, fast_tx->hdr_len); | 
|  | memcpy(skb->data + fast_tx->da_offs, da, ETH_ALEN); | 
|  | memcpy(skb->data + fast_tx->sa_offs, sa, ETH_ALEN); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | memset(info, 0, sizeof(*info)); | 
|  | info->band = fast_tx->band; | 
|  | info->control.vif = &sdata->vif; | 
|  | info->flags = IEEE80211_TX_CTL_FIRST_FRAGMENT | | 
|  | IEEE80211_TX_CTL_DONTFRAG; | 
|  | info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT | | 
|  | u32_encode_bits(IEEE80211_LINK_UNSPECIFIED, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | if (local->force_tx_status) | 
|  | info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
|  | #endif | 
|  |  | 
|  | if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | 
|  | u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  |  | 
|  | *ieee80211_get_qos_ctl(hdr) = tid; | 
|  | } | 
|  |  | 
|  | __skb_queue_head_init(&tx.skbs); | 
|  |  | 
|  | tx.flags = IEEE80211_TX_UNICAST; | 
|  | tx.local = local; | 
|  | tx.sdata = sdata; | 
|  | tx.sta = sta; | 
|  | tx.key = fast_tx->key; | 
|  |  | 
|  | if (ieee80211_queue_skb(local, sdata, sta, skb)) | 
|  | return; | 
|  |  | 
|  | tx.skb = skb; | 
|  | r = ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs, | 
|  | fast_tx->key, &tx); | 
|  | tx.skb = NULL; | 
|  | if (r == TX_DROP) { | 
|  | tx.sdata->tx_handlers_drop++; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  |  | 
|  | __skb_queue_tail(&tx.skbs, skb); | 
|  | ieee80211_tx_frags(local, &sdata->vif, sta, &tx.skbs, false); | 
|  | return; | 
|  |  | 
|  | free: | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, | 
|  | struct sta_info *sta, | 
|  | struct ieee80211_fast_tx *fast_tx, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | u16 ethertype = (skb->data[12] << 8) | skb->data[13]; | 
|  | struct ieee80211_hdr *hdr = (void *)fast_tx->hdr; | 
|  | struct tid_ampdu_tx *tid_tx = NULL; | 
|  | struct sk_buff *next; | 
|  | struct ethhdr eth; | 
|  | u8 tid = IEEE80211_NUM_TIDS; | 
|  |  | 
|  | /* control port protocol needs a lot of special handling */ | 
|  | if (cpu_to_be16(ethertype) == sdata->control_port_protocol) | 
|  | return false; | 
|  |  | 
|  | /* only RFC 1042 SNAP */ | 
|  | if (ethertype < ETH_P_802_3_MIN) | 
|  | return false; | 
|  |  | 
|  | /* don't handle TX status request here either */ | 
|  | if (sk_requests_wifi_status(skb->sk)) | 
|  | return false; | 
|  |  | 
|  | if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | 
|  | tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  | tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | 
|  | if (tid_tx) { | 
|  | if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) | 
|  | return false; | 
|  | if (tid_tx->timeout) | 
|  | tid_tx->last_tx = jiffies; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(ð, skb->data, ETH_HLEN - 2); | 
|  |  | 
|  | /* after this point (skb is modified) we cannot return false */ | 
|  | skb = ieee80211_tx_skb_fixup(skb, ieee80211_sdata_netdev_features(sdata)); | 
|  | if (!skb) | 
|  | return true; | 
|  |  | 
|  | skb_list_walk_safe(skb, skb, next) { | 
|  | skb_mark_not_on_list(skb); | 
|  | __ieee80211_xmit_fast(sdata, sta, fast_tx, skb, tid_tx, | 
|  | eth.h_dest, eth.h_source); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct txq_info *txqi = container_of(txq, struct txq_info, txq); | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct sk_buff *skb = NULL; | 
|  | struct fq *fq = &local->fq; | 
|  | struct fq_tin *tin = &txqi->tin; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_tx_data tx; | 
|  | ieee80211_tx_result r; | 
|  | struct ieee80211_vif *vif = txq->vif; | 
|  | int q = vif->hw_queue[txq->ac]; | 
|  | unsigned long flags; | 
|  | bool q_stopped; | 
|  |  | 
|  | WARN_ON_ONCE(softirq_count() == 0); | 
|  |  | 
|  | if (!ieee80211_txq_airtime_check(hw, txq)) | 
|  | return NULL; | 
|  |  | 
|  | begin: | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | q_stopped = local->queue_stop_reasons[q]; | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | if (unlikely(q_stopped)) { | 
|  | /* mark for waking later */ | 
|  | set_bit(IEEE80211_TXQ_DIRTY, &txqi->flags); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&fq->lock); | 
|  |  | 
|  | /* Make sure fragments stay together. */ | 
|  | skb = __skb_dequeue(&txqi->frags); | 
|  | if (unlikely(skb)) { | 
|  | if (!(IEEE80211_SKB_CB(skb)->control.flags & | 
|  | IEEE80211_TX_INTCFL_NEED_TXPROCESSING)) | 
|  | goto out; | 
|  | IEEE80211_SKB_CB(skb)->control.flags &= | 
|  | ~IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | 
|  | } else { | 
|  | if (unlikely(test_bit(IEEE80211_TXQ_STOP, &txqi->flags))) | 
|  | goto out; | 
|  |  | 
|  | skb = fq_tin_dequeue(fq, tin, fq_tin_dequeue_func); | 
|  | } | 
|  |  | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | spin_unlock_bh(&fq->lock); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | memset(&tx, 0, sizeof(tx)); | 
|  | __skb_queue_head_init(&tx.skbs); | 
|  | tx.local = local; | 
|  | tx.skb = skb; | 
|  | tx.sdata = vif_to_sdata(info->control.vif); | 
|  |  | 
|  | if (txq->sta) { | 
|  | tx.sta = container_of(txq->sta, struct sta_info, sta); | 
|  | /* | 
|  | * Drop unicast frames to unauthorised stations unless they are | 
|  | * injected frames or EAPOL frames from the local station. | 
|  | */ | 
|  | if (unlikely(!(info->flags & IEEE80211_TX_CTL_INJECTED) && | 
|  | ieee80211_is_data(hdr->frame_control) && | 
|  | !ieee80211_vif_is_mesh(&tx.sdata->vif) && | 
|  | tx.sdata->vif.type != NL80211_IFTYPE_OCB && | 
|  | !is_multicast_ether_addr(hdr->addr1) && | 
|  | !test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) && | 
|  | (!(info->control.flags & | 
|  | IEEE80211_TX_CTRL_PORT_CTRL_PROTO) || | 
|  | !ieee80211_is_our_addr(tx.sdata, hdr->addr2, | 
|  | NULL)))) { | 
|  | I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The key can be removed while the packet was queued, so need to call | 
|  | * this here to get the current key. | 
|  | */ | 
|  | info->control.hw_key = NULL; | 
|  | r = ieee80211_tx_h_select_key(&tx); | 
|  | if (r != TX_CONTINUE) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } | 
|  |  | 
|  | if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags)) | 
|  | info->flags |= (IEEE80211_TX_CTL_AMPDU | | 
|  | IEEE80211_TX_CTL_DONTFRAG); | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) { | 
|  | if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) { | 
|  | r = ieee80211_tx_h_rate_ctrl(&tx); | 
|  | if (r != TX_CONTINUE) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } | 
|  | } | 
|  | goto encap_out; | 
|  | } | 
|  |  | 
|  | if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) { | 
|  | struct sta_info *sta = container_of(txq->sta, struct sta_info, | 
|  | sta); | 
|  | u8 pn_offs = 0; | 
|  |  | 
|  | if (tx.key && | 
|  | (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) | 
|  | pn_offs = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | r = ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs, | 
|  | tx.key, &tx); | 
|  | if (r != TX_CONTINUE) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } | 
|  | } else { | 
|  | if (invoke_tx_handlers_late(&tx)) | 
|  | goto begin; | 
|  |  | 
|  | skb = __skb_dequeue(&tx.skbs); | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (!skb_queue_empty(&tx.skbs)) { | 
|  | spin_lock_bh(&fq->lock); | 
|  | skb_queue_splice_tail(&tx.skbs, &txqi->frags); | 
|  | spin_unlock_bh(&fq->lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb_has_frag_list(skb) && | 
|  | !ieee80211_hw_check(&local->hw, TX_FRAG_LIST)) { | 
|  | if (skb_linearize(skb)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (tx.sdata->vif.type) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if ((tx.sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) || | 
|  | ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) { | 
|  | vif = &tx.sdata->vif; | 
|  | break; | 
|  | } | 
|  | tx.sdata = rcu_dereference(local->monitor_sdata); | 
|  | if (tx.sdata && | 
|  | ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) { | 
|  | vif = &tx.sdata->vif; | 
|  | info->hw_queue = | 
|  | vif->hw_queue[skb_get_queue_mapping(skb)]; | 
|  | } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | goto begin; | 
|  | } else { | 
|  | info->control.vif = NULL; | 
|  | return skb; | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | tx.sdata = container_of(tx.sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  | fallthrough; | 
|  | default: | 
|  | vif = &tx.sdata->vif; | 
|  | break; | 
|  | } | 
|  |  | 
|  | encap_out: | 
|  | info->control.vif = vif; | 
|  |  | 
|  | if (tx.sta && | 
|  | wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_AQL)) { | 
|  | bool ampdu = txq->ac != IEEE80211_AC_VO; | 
|  | u32 airtime; | 
|  |  | 
|  | airtime = ieee80211_calc_expected_tx_airtime(hw, vif, txq->sta, | 
|  | skb->len, ampdu); | 
|  | if (airtime) { | 
|  | airtime = ieee80211_info_set_tx_time_est(info, airtime); | 
|  | ieee80211_sta_update_pending_airtime(local, tx.sta, | 
|  | txq->ac, | 
|  | airtime, | 
|  | false); | 
|  | } | 
|  | } | 
|  |  | 
|  | return skb; | 
|  |  | 
|  | out: | 
|  | spin_unlock_bh(&fq->lock); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_tx_dequeue); | 
|  |  | 
|  | static inline s32 ieee80211_sta_deficit(struct sta_info *sta, u8 ac) | 
|  | { | 
|  | struct airtime_info *air_info = &sta->airtime[ac]; | 
|  |  | 
|  | return air_info->deficit - atomic_read(&air_info->aql_tx_pending); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_txq_set_active(struct txq_info *txqi) | 
|  | { | 
|  | struct sta_info *sta; | 
|  |  | 
|  | if (!txqi->txq.sta) | 
|  | return; | 
|  |  | 
|  | sta = container_of(txqi->txq.sta, struct sta_info, sta); | 
|  | sta->airtime[txqi->txq.ac].last_active = jiffies; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ieee80211_txq_keep_active(struct txq_info *txqi) | 
|  | { | 
|  | struct sta_info *sta; | 
|  |  | 
|  | if (!txqi->txq.sta) | 
|  | return false; | 
|  |  | 
|  | sta = container_of(txqi->txq.sta, struct sta_info, sta); | 
|  | if (ieee80211_sta_deficit(sta, txqi->txq.ac) >= 0) | 
|  | return false; | 
|  |  | 
|  | return ieee80211_sta_keep_active(sta, txqi->txq.ac); | 
|  | } | 
|  |  | 
|  | struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_txq *ret = NULL; | 
|  | struct txq_info *txqi = NULL, *head = NULL; | 
|  | bool found_eligible_txq = false; | 
|  |  | 
|  | spin_lock_bh(&local->active_txq_lock[ac]); | 
|  |  | 
|  | if (!local->schedule_round[ac]) | 
|  | goto out; | 
|  |  | 
|  | begin: | 
|  | txqi = list_first_entry_or_null(&local->active_txqs[ac], | 
|  | struct txq_info, | 
|  | schedule_order); | 
|  | if (!txqi) | 
|  | goto out; | 
|  |  | 
|  | if (txqi == head) { | 
|  | if (!found_eligible_txq) | 
|  | goto out; | 
|  | else | 
|  | found_eligible_txq = false; | 
|  | } | 
|  |  | 
|  | if (!head) | 
|  | head = txqi; | 
|  |  | 
|  | if (txqi->txq.sta) { | 
|  | struct sta_info *sta = container_of(txqi->txq.sta, | 
|  | struct sta_info, sta); | 
|  | bool aql_check = ieee80211_txq_airtime_check(hw, &txqi->txq); | 
|  | s32 deficit = ieee80211_sta_deficit(sta, txqi->txq.ac); | 
|  |  | 
|  | if (aql_check) | 
|  | found_eligible_txq = true; | 
|  |  | 
|  | if (deficit < 0) | 
|  | sta->airtime[txqi->txq.ac].deficit += | 
|  | sta->airtime_weight; | 
|  |  | 
|  | if (deficit < 0 || !aql_check) { | 
|  | list_move_tail(&txqi->schedule_order, | 
|  | &local->active_txqs[txqi->txq.ac]); | 
|  | goto begin; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (txqi->schedule_round == local->schedule_round[ac]) | 
|  | goto out; | 
|  |  | 
|  | list_del_init(&txqi->schedule_order); | 
|  | txqi->schedule_round = local->schedule_round[ac]; | 
|  | ret = &txqi->txq; | 
|  |  | 
|  | out: | 
|  | spin_unlock_bh(&local->active_txq_lock[ac]); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_next_txq); | 
|  |  | 
|  | void __ieee80211_schedule_txq(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq, | 
|  | bool force) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct txq_info *txqi = to_txq_info(txq); | 
|  | bool has_queue; | 
|  |  | 
|  | spin_lock_bh(&local->active_txq_lock[txq->ac]); | 
|  |  | 
|  | has_queue = force || | 
|  | (!test_bit(IEEE80211_TXQ_STOP, &txqi->flags) && | 
|  | txq_has_queue(txq)); | 
|  | if (list_empty(&txqi->schedule_order) && | 
|  | (has_queue || ieee80211_txq_keep_active(txqi))) { | 
|  | /* If airtime accounting is active, always enqueue STAs at the | 
|  | * head of the list to ensure that they only get moved to the | 
|  | * back by the airtime DRR scheduler once they have a negative | 
|  | * deficit. A station that already has a negative deficit will | 
|  | * get immediately moved to the back of the list on the next | 
|  | * call to ieee80211_next_txq(). | 
|  | */ | 
|  | if (txqi->txq.sta && local->airtime_flags && has_queue && | 
|  | wiphy_ext_feature_isset(local->hw.wiphy, | 
|  | NL80211_EXT_FEATURE_AIRTIME_FAIRNESS)) | 
|  | list_add(&txqi->schedule_order, | 
|  | &local->active_txqs[txq->ac]); | 
|  | else | 
|  | list_add_tail(&txqi->schedule_order, | 
|  | &local->active_txqs[txq->ac]); | 
|  | if (has_queue) | 
|  | ieee80211_txq_set_active(txqi); | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&local->active_txq_lock[txq->ac]); | 
|  | } | 
|  | EXPORT_SYMBOL(__ieee80211_schedule_txq); | 
|  |  | 
|  | DEFINE_STATIC_KEY_FALSE(aql_disable); | 
|  |  | 
|  | bool ieee80211_txq_airtime_check(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  |  | 
|  | if (!wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_AQL)) | 
|  | return true; | 
|  |  | 
|  | if (static_branch_unlikely(&aql_disable)) | 
|  | return true; | 
|  |  | 
|  | if (!txq->sta) | 
|  | return true; | 
|  |  | 
|  | if (unlikely(txq->tid == IEEE80211_NUM_TIDS)) | 
|  | return true; | 
|  |  | 
|  | sta = container_of(txq->sta, struct sta_info, sta); | 
|  | if (atomic_read(&sta->airtime[txq->ac].aql_tx_pending) < | 
|  | sta->airtime[txq->ac].aql_limit_low) | 
|  | return true; | 
|  |  | 
|  | if (atomic_read(&local->aql_total_pending_airtime) < | 
|  | local->aql_threshold && | 
|  | atomic_read(&sta->airtime[txq->ac].aql_tx_pending) < | 
|  | sta->airtime[txq->ac].aql_limit_high) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_txq_airtime_check); | 
|  |  | 
|  | static bool | 
|  | ieee80211_txq_schedule_airtime_check(struct ieee80211_local *local, u8 ac) | 
|  | { | 
|  | unsigned int num_txq = 0; | 
|  | struct txq_info *txq; | 
|  | u32 aql_limit; | 
|  |  | 
|  | if (!wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_AQL)) | 
|  | return true; | 
|  |  | 
|  | list_for_each_entry(txq, &local->active_txqs[ac], schedule_order) | 
|  | num_txq++; | 
|  |  | 
|  | aql_limit = (num_txq - 1) * local->aql_txq_limit_low[ac] / 2 + | 
|  | local->aql_txq_limit_high[ac]; | 
|  |  | 
|  | return atomic_read(&local->aql_ac_pending_airtime[ac]) < aql_limit; | 
|  | } | 
|  |  | 
|  | bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct txq_info *iter, *tmp, *txqi = to_txq_info(txq); | 
|  | struct sta_info *sta; | 
|  | u8 ac = txq->ac; | 
|  |  | 
|  | spin_lock_bh(&local->active_txq_lock[ac]); | 
|  |  | 
|  | if (!txqi->txq.sta) | 
|  | goto out; | 
|  |  | 
|  | if (list_empty(&txqi->schedule_order)) | 
|  | goto out; | 
|  |  | 
|  | if (!ieee80211_txq_schedule_airtime_check(local, ac)) | 
|  | goto out; | 
|  |  | 
|  | list_for_each_entry_safe(iter, tmp, &local->active_txqs[ac], | 
|  | schedule_order) { | 
|  | if (iter == txqi) | 
|  | break; | 
|  |  | 
|  | if (!iter->txq.sta) { | 
|  | list_move_tail(&iter->schedule_order, | 
|  | &local->active_txqs[ac]); | 
|  | continue; | 
|  | } | 
|  | sta = container_of(iter->txq.sta, struct sta_info, sta); | 
|  | if (ieee80211_sta_deficit(sta, ac) < 0) | 
|  | sta->airtime[ac].deficit += sta->airtime_weight; | 
|  | list_move_tail(&iter->schedule_order, &local->active_txqs[ac]); | 
|  | } | 
|  |  | 
|  | sta = container_of(txqi->txq.sta, struct sta_info, sta); | 
|  | if (sta->airtime[ac].deficit >= 0) | 
|  | goto out; | 
|  |  | 
|  | sta->airtime[ac].deficit += sta->airtime_weight; | 
|  | list_move_tail(&txqi->schedule_order, &local->active_txqs[ac]); | 
|  | spin_unlock_bh(&local->active_txq_lock[ac]); | 
|  |  | 
|  | return false; | 
|  | out: | 
|  | if (!list_empty(&txqi->schedule_order)) | 
|  | list_del_init(&txqi->schedule_order); | 
|  | spin_unlock_bh(&local->active_txq_lock[ac]); | 
|  |  | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_txq_may_transmit); | 
|  |  | 
|  | void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  |  | 
|  | spin_lock_bh(&local->active_txq_lock[ac]); | 
|  |  | 
|  | if (ieee80211_txq_schedule_airtime_check(local, ac)) { | 
|  | local->schedule_round[ac]++; | 
|  | if (!local->schedule_round[ac]) | 
|  | local->schedule_round[ac]++; | 
|  | } else { | 
|  | local->schedule_round[ac] = 0; | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&local->active_txq_lock[ac]); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_txq_schedule_start); | 
|  |  | 
|  | void __ieee80211_subif_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev, | 
|  | u32 info_flags, | 
|  | u32 ctrl_flags, | 
|  | u64 *cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | struct sk_buff *next; | 
|  | int len = skb->len; | 
|  |  | 
|  | if (unlikely(!ieee80211_sdata_running(sdata) || skb->len < ETH_HLEN)) { | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sk_pacing_shift_update(skb->sk, sdata->local->hw.tx_sk_pacing_shift); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif) && | 
|  | ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT) && | 
|  | ieee80211_mesh_xmit_fast(sdata, skb, ctrl_flags)) | 
|  | goto out; | 
|  |  | 
|  | if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) | 
|  | goto out_free; | 
|  |  | 
|  | if (IS_ERR(sta)) | 
|  | sta = NULL; | 
|  |  | 
|  | skb_set_queue_mapping(skb, ieee80211_select_queue(sdata, sta, skb)); | 
|  | ieee80211_aggr_check(sdata, sta, skb); | 
|  |  | 
|  | if (sta) { | 
|  | struct ieee80211_fast_tx *fast_tx; | 
|  |  | 
|  | fast_tx = rcu_dereference(sta->fast_tx); | 
|  |  | 
|  | if (fast_tx && | 
|  | ieee80211_xmit_fast(sdata, sta, fast_tx, skb)) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the frame could be fragmented, software-encrypted, and other | 
|  | * things so we cannot really handle checksum or GSO offload. | 
|  | * fix it up in software before we handle anything else. | 
|  | */ | 
|  | skb = ieee80211_tx_skb_fixup(skb, 0); | 
|  | if (!skb) { | 
|  | len = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | skb_list_walk_safe(skb, skb, next) { | 
|  | skb_mark_not_on_list(skb); | 
|  |  | 
|  | if (skb->protocol == sdata->control_port_protocol) | 
|  | ctrl_flags |= IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP; | 
|  |  | 
|  | skb = ieee80211_build_hdr(sdata, skb, info_flags, | 
|  | sta, ctrl_flags, cookie); | 
|  | if (IS_ERR(skb)) { | 
|  | kfree_skb_list(next); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | dev_sw_netstats_tx_add(dev, 1, skb->len); | 
|  |  | 
|  | ieee80211_xmit(sdata, sta, skb); | 
|  | } | 
|  | goto out; | 
|  | out_free: | 
|  | kfree_skb(skb); | 
|  | len = 0; | 
|  | out: | 
|  | if (len) | 
|  | ieee80211_tpt_led_trig_tx(local, len); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_da(struct sk_buff *skb, struct sta_info *sta) | 
|  | { | 
|  | struct ethhdr *eth; | 
|  | int err; | 
|  |  | 
|  | err = skb_ensure_writable(skb, ETH_HLEN); | 
|  | if (unlikely(err)) | 
|  | return err; | 
|  |  | 
|  | eth = (void *)skb->data; | 
|  | ether_addr_copy(eth->h_dest, sta->sta.addr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_multicast_to_unicast(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | const struct ethhdr *eth = (void *)skb->data; | 
|  | const struct vlan_ethhdr *ethvlan = (void *)skb->data; | 
|  | __be16 ethertype; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | if (sdata->u.vlan.sta) | 
|  | return false; | 
|  | if (sdata->wdev.use_4addr) | 
|  | return false; | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_AP: | 
|  | /* check runtime toggle for this bss */ | 
|  | if (!sdata->bss->multicast_to_unicast) | 
|  | return false; | 
|  | break; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* multicast to unicast conversion only for some payload */ | 
|  | ethertype = eth->h_proto; | 
|  | if (ethertype == htons(ETH_P_8021Q) && skb->len >= VLAN_ETH_HLEN) | 
|  | ethertype = ethvlan->h_vlan_encapsulated_proto; | 
|  | switch (ethertype) { | 
|  | case htons(ETH_P_ARP): | 
|  | case htons(ETH_P_IP): | 
|  | case htons(ETH_P_IPV6): | 
|  | break; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_convert_to_unicast(struct sk_buff *skb, struct net_device *dev, | 
|  | struct sk_buff_head *queue) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | const struct ethhdr *eth = (struct ethhdr *)skb->data; | 
|  | struct sta_info *sta, *first = NULL; | 
|  | struct sk_buff *cloned_skb; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
|  | if (sdata != sta->sdata) | 
|  | /* AP-VLAN mismatch */ | 
|  | continue; | 
|  | if (unlikely(ether_addr_equal(eth->h_source, sta->sta.addr))) | 
|  | /* do not send back to source */ | 
|  | continue; | 
|  | if (!first) { | 
|  | first = sta; | 
|  | continue; | 
|  | } | 
|  | cloned_skb = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!cloned_skb) | 
|  | goto multicast; | 
|  | if (unlikely(ieee80211_change_da(cloned_skb, sta))) { | 
|  | dev_kfree_skb(cloned_skb); | 
|  | goto multicast; | 
|  | } | 
|  | __skb_queue_tail(queue, cloned_skb); | 
|  | } | 
|  |  | 
|  | if (likely(first)) { | 
|  | if (unlikely(ieee80211_change_da(skb, first))) | 
|  | goto multicast; | 
|  | __skb_queue_tail(queue, skb); | 
|  | } else { | 
|  | /* no STA connected, drop */ | 
|  | kfree_skb(skb); | 
|  | skb = NULL; | 
|  | } | 
|  |  | 
|  | goto out; | 
|  | multicast: | 
|  | __skb_queue_purge(queue); | 
|  | __skb_queue_tail(queue, skb); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mlo_multicast_tx_one(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, u32 ctrl_flags, | 
|  | unsigned int link_id) | 
|  | { | 
|  | struct sk_buff *out; | 
|  |  | 
|  | out = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!out) | 
|  | return; | 
|  |  | 
|  | ctrl_flags |= u32_encode_bits(link_id, IEEE80211_TX_CTRL_MLO_LINK); | 
|  | __ieee80211_subif_start_xmit(out, sdata->dev, 0, ctrl_flags, NULL); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mlo_multicast_tx(struct net_device *dev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | unsigned long links = sdata->vif.active_links; | 
|  | unsigned int link; | 
|  | u32 ctrl_flags = IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX; | 
|  |  | 
|  | if (hweight16(links) == 1) { | 
|  | ctrl_flags |= u32_encode_bits(__ffs(links), | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | __ieee80211_subif_start_xmit(skb, sdata->dev, 0, ctrl_flags, | 
|  | NULL); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for_each_set_bit(link, &links, IEEE80211_MLD_MAX_NUM_LINKS) { | 
|  | ieee80211_mlo_multicast_tx_one(sdata, skb, ctrl_flags, link); | 
|  | ctrl_flags = 0; | 
|  | } | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_subif_start_xmit - netif start_xmit function for 802.3 vifs | 
|  | * @skb: packet to be sent | 
|  | * @dev: incoming interface | 
|  | * | 
|  | * On failure skb will be freed. | 
|  | * | 
|  | * Returns: the netdev TX status (but really only %NETDEV_TX_OK) | 
|  | */ | 
|  | netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | const struct ethhdr *eth = (void *)skb->data; | 
|  |  | 
|  | if (likely(!is_multicast_ether_addr(eth->h_dest))) | 
|  | goto normal; | 
|  |  | 
|  | if (unlikely(!ieee80211_sdata_running(sdata))) { | 
|  | kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (unlikely(ieee80211_multicast_to_unicast(skb, dev))) { | 
|  | struct sk_buff_head queue; | 
|  |  | 
|  | __skb_queue_head_init(&queue); | 
|  | ieee80211_convert_to_unicast(skb, dev, &queue); | 
|  | while ((skb = __skb_dequeue(&queue))) | 
|  | __ieee80211_subif_start_xmit(skb, dev, 0, | 
|  | IEEE80211_TX_CTRL_MLO_LINK_UNSPEC, | 
|  | NULL); | 
|  | } else if (ieee80211_vif_is_mld(&sdata->vif) && | 
|  | ((sdata->vif.type == NL80211_IFTYPE_AP && | 
|  | !ieee80211_hw_check(&sdata->local->hw, MLO_MCAST_MULTI_LINK_TX)) || | 
|  | (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
|  | !sdata->wdev.use_4addr))) { | 
|  | ieee80211_mlo_multicast_tx(dev, skb); | 
|  | } else { | 
|  | normal: | 
|  | __ieee80211_subif_start_xmit(skb, dev, 0, | 
|  | IEEE80211_TX_CTRL_MLO_LINK_UNSPEC, | 
|  | NULL); | 
|  | } | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | static bool __ieee80211_tx_8023(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, struct sta_info *sta, | 
|  | bool txpending) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_control control = {}; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_sta *pubsta = NULL; | 
|  | unsigned long flags; | 
|  | int q = info->hw_queue; | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | if (local->queue_stop_reasons[q] || | 
|  | (!txpending && !skb_queue_empty(&local->pending[q]))) { | 
|  | if (txpending) | 
|  | skb_queue_head(&local->pending[q], skb); | 
|  | else | 
|  | skb_queue_tail(&local->pending[q], skb); | 
|  |  | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | if (sta && sta->uploaded) | 
|  | pubsta = &sta->sta; | 
|  |  | 
|  | control.sta = pubsta; | 
|  |  | 
|  | drv_tx(local, &control, skb); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_tx_8023(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, struct sta_info *sta, | 
|  | bool txpending) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *next; | 
|  | bool ret = true; | 
|  |  | 
|  | if (ieee80211_queue_skb(local, sdata, sta, skb)) | 
|  | return true; | 
|  |  | 
|  | skb_list_walk_safe(skb, skb, next) { | 
|  | skb_mark_not_on_list(skb); | 
|  | if (!__ieee80211_tx_8023(sdata, skb, sta, txpending)) | 
|  | ret = false; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ieee80211_8023_xmit(struct ieee80211_sub_if_data *sdata, | 
|  | struct net_device *dev, struct sta_info *sta, | 
|  | struct ieee80211_key *key, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct tid_ampdu_tx *tid_tx; | 
|  | struct sk_buff *seg, *next; | 
|  | unsigned int skbs = 0, len = 0; | 
|  | u16 queue; | 
|  | u8 tid; | 
|  |  | 
|  | queue = ieee80211_select_queue(sdata, sta, skb); | 
|  | skb_set_queue_mapping(skb, queue); | 
|  |  | 
|  | if (unlikely(test_bit(SCAN_SW_SCANNING, &local->scanning)) && | 
|  | test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) | 
|  | goto out_free; | 
|  |  | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb)) | 
|  | return; | 
|  |  | 
|  | ieee80211_aggr_check(sdata, sta, skb); | 
|  |  | 
|  | tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | 
|  | tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | 
|  | if (tid_tx) { | 
|  | if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | 
|  | /* fall back to non-offload slow path */ | 
|  | __ieee80211_subif_start_xmit(skb, dev, 0, | 
|  | IEEE80211_TX_CTRL_MLO_LINK_UNSPEC, | 
|  | NULL); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (tid_tx->timeout) | 
|  | tid_tx->last_tx = jiffies; | 
|  | } | 
|  |  | 
|  | skb = ieee80211_tx_skb_fixup(skb, ieee80211_sdata_netdev_features(sdata)); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | memset(info, 0, sizeof(*info)); | 
|  |  | 
|  | info->hw_queue = sdata->vif.hw_queue[queue]; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  |  | 
|  | info->flags |= IEEE80211_TX_CTL_HW_80211_ENCAP; | 
|  | info->control.vif = &sdata->vif; | 
|  |  | 
|  | if (key) | 
|  | info->control.hw_key = &key->conf; | 
|  |  | 
|  | skb_list_walk_safe(skb, seg, next) { | 
|  | skbs++; | 
|  | len += seg->len; | 
|  | if (seg != skb) | 
|  | memcpy(IEEE80211_SKB_CB(seg), info, sizeof(*info)); | 
|  | } | 
|  |  | 
|  | if (unlikely(sk_requests_wifi_status(skb->sk))) { | 
|  | info->status_data = ieee80211_store_ack_skb(local, skb, | 
|  | &info->flags, NULL); | 
|  | if (info->status_data) | 
|  | info->status_data_idr = 1; | 
|  | } | 
|  |  | 
|  | dev_sw_netstats_tx_add(dev, skbs, len); | 
|  | sta->deflink.tx_stats.packets[queue] += skbs; | 
|  | sta->deflink.tx_stats.bytes[queue] += len; | 
|  |  | 
|  | ieee80211_tpt_led_trig_tx(local, len); | 
|  |  | 
|  | ieee80211_tx_8023(sdata, skb, sta, false); | 
|  |  | 
|  | return; | 
|  |  | 
|  | out_free: | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | netdev_tx_t ieee80211_subif_start_xmit_8023(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ethhdr *ehdr = (struct ethhdr *)skb->data; | 
|  | struct ieee80211_key *key; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | if (unlikely(!ieee80211_sdata_running(sdata) || skb->len < ETH_HLEN)) { | 
|  | kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { | 
|  | kfree_skb(skb); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (unlikely(IS_ERR_OR_NULL(sta) || !sta->uploaded || | 
|  | !test_sta_flag(sta, WLAN_STA_AUTHORIZED) || | 
|  | sdata->control_port_protocol == ehdr->h_proto)) | 
|  | goto skip_offload; | 
|  |  | 
|  | key = rcu_dereference(sta->ptk[sta->ptk_idx]); | 
|  | if (!key) | 
|  | key = rcu_dereference(sdata->default_unicast_key); | 
|  |  | 
|  | if (key && (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) || | 
|  | key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)) | 
|  | goto skip_offload; | 
|  |  | 
|  | sk_pacing_shift_update(skb->sk, sdata->local->hw.tx_sk_pacing_shift); | 
|  | ieee80211_8023_xmit(sdata, dev, sta, key, skb); | 
|  | goto out; | 
|  |  | 
|  | skip_offload: | 
|  | ieee80211_subif_start_xmit(skb, dev); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | struct sk_buff * | 
|  | ieee80211_build_data_template(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, u32 info_flags) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_tx_data tx = { | 
|  | .local = sdata->local, | 
|  | .sdata = sdata, | 
|  | }; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { | 
|  | kfree_skb(skb); | 
|  | skb = ERR_PTR(-EINVAL); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | skb = ieee80211_build_hdr(sdata, skb, info_flags, sta, | 
|  | IEEE80211_TX_CTRL_MLO_LINK_UNSPEC, NULL); | 
|  | if (IS_ERR(skb)) | 
|  | goto out; | 
|  |  | 
|  | hdr = (void *)skb->data; | 
|  | tx.sta = sta_info_get(sdata, hdr->addr1); | 
|  | tx.skb = skb; | 
|  |  | 
|  | if (ieee80211_tx_h_select_key(&tx) != TX_CONTINUE) { | 
|  | rcu_read_unlock(); | 
|  | kfree_skb(skb); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ieee80211_clear_tx_pending may not be called in a context where | 
|  | * it is possible that it packets could come in again. | 
|  | */ | 
|  | void ieee80211_clear_tx_pending(struct ieee80211_local *local) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < local->hw.queues; i++) { | 
|  | while ((skb = skb_dequeue(&local->pending[i])) != NULL) | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns false if the frame couldn't be transmitted but was queued instead, | 
|  | * which in this case means re-queued -- take as an indication to stop sending | 
|  | * more pending frames. | 
|  | */ | 
|  | static bool ieee80211_tx_pending_skb(struct ieee80211_local *local, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_hdr *hdr; | 
|  | bool result; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  |  | 
|  | sdata = vif_to_sdata(info->control.vif); | 
|  |  | 
|  | if (info->control.flags & IEEE80211_TX_INTCFL_NEED_TXPROCESSING) { | 
|  | /* update band only for non-MLD */ | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | chanctx_conf = | 
|  | rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  | if (unlikely(!chanctx_conf)) { | 
|  | dev_kfree_skb(skb); | 
|  | return true; | 
|  | } | 
|  | info->band = chanctx_conf->def.chan->band; | 
|  | } | 
|  | result = ieee80211_tx(sdata, NULL, skb, true); | 
|  | } else if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) { | 
|  | if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { | 
|  | dev_kfree_skb(skb); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(sta) || (sta && !sta->uploaded)) | 
|  | sta = NULL; | 
|  |  | 
|  | result = ieee80211_tx_8023(sdata, skb, sta, true); | 
|  | } else { | 
|  | struct sk_buff_head skbs; | 
|  |  | 
|  | __skb_queue_head_init(&skbs); | 
|  | __skb_queue_tail(&skbs, skb); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | sta = sta_info_get(sdata, hdr->addr1); | 
|  |  | 
|  | result = __ieee80211_tx(local, &skbs, sta, true); | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Transmit all pending packets. Called from tasklet. | 
|  | */ | 
|  | void ieee80211_tx_pending(struct tasklet_struct *t) | 
|  | { | 
|  | struct ieee80211_local *local = from_tasklet(local, t, | 
|  | tx_pending_tasklet); | 
|  | unsigned long flags; | 
|  | int i; | 
|  | bool txok; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | for (i = 0; i < local->hw.queues; i++) { | 
|  | /* | 
|  | * If queue is stopped by something other than due to pending | 
|  | * frames, or we have no pending frames, proceed to next queue. | 
|  | */ | 
|  | if (local->queue_stop_reasons[i] || | 
|  | skb_queue_empty(&local->pending[i])) | 
|  | continue; | 
|  |  | 
|  | while (!skb_queue_empty(&local->pending[i])) { | 
|  | struct sk_buff *skb = __skb_dequeue(&local->pending[i]); | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | if (WARN_ON(!info->control.vif)) { | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, | 
|  | flags); | 
|  |  | 
|  | txok = ieee80211_tx_pending_skb(local, skb); | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, | 
|  | flags); | 
|  | if (!txok) | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /* functions for drivers to get certain frames */ | 
|  |  | 
|  | static void ieee80211_beacon_add_tim_pvb(struct ps_data *ps, | 
|  | struct sk_buff *skb, | 
|  | bool mcast_traffic) | 
|  | { | 
|  | int i, n1 = 0, n2; | 
|  |  | 
|  | /* | 
|  | * Find largest even number N1 so that bits numbered 1 through | 
|  | * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | 
|  | * (N2 + 1) x 8 through 2007 are 0. | 
|  | */ | 
|  | for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | 
|  | if (ps->tim[i]) { | 
|  | n1 = i & 0xfe; | 
|  | break; | 
|  | } | 
|  | } | 
|  | n2 = n1; | 
|  | for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | 
|  | if (ps->tim[i]) { | 
|  | n2 = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Bitmap control */ | 
|  | skb_put_u8(skb, n1 | mcast_traffic); | 
|  | /* Part Virt Bitmap */ | 
|  | skb_put_data(skb, ps->tim + n1, n2 - n1 + 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mac80211 currently supports encoding using block bitmap mode, non | 
|  | * inversed. The current implementation supports up to 1600 AIDs. | 
|  | * | 
|  | * Block bitmap encoding breaks down the AID bitmap into blocks of 64 | 
|  | * AIDs. Each block contains between 0 and 8 subblocks. Each subblock | 
|  | * describes 8 AIDs and the presence of a subblock is determined by | 
|  | * the block bitmap. | 
|  | */ | 
|  | static void ieee80211_s1g_beacon_add_tim_pvb(struct ps_data *ps, | 
|  | struct sk_buff *skb, | 
|  | bool mcast_traffic) | 
|  | { | 
|  | int blk; | 
|  |  | 
|  | /* | 
|  | * Emit a bitmap control block with a page slice number of 31 and a | 
|  | * page index of 0 which indicates as per IEEE80211-2024 9.4.2.5.1 | 
|  | * that the entire page (2048 bits) indicated by the page index | 
|  | * is encoded in the partial virtual bitmap. | 
|  | */ | 
|  | skb_put_u8(skb, mcast_traffic | (31 << 1)); | 
|  |  | 
|  | /* Emit an encoded block for each non-zero sub-block */ | 
|  | for (blk = 0; blk < IEEE80211_MAX_SUPPORTED_S1G_TIM_BLOCKS; blk++) { | 
|  | u8 blk_bmap = 0; | 
|  | int sblk; | 
|  |  | 
|  | for (sblk = 0; sblk < 8; sblk++) { | 
|  | int sblk_idx = blk * 8 + sblk; | 
|  |  | 
|  | /* | 
|  | * If the current subblock is non-zero, increase the | 
|  | * number of subblocks to emit for the current block. | 
|  | */ | 
|  | if (ps->tim[sblk_idx]) | 
|  | blk_bmap |= BIT(sblk); | 
|  | } | 
|  |  | 
|  | /* If the current block contains no non-zero sublocks */ | 
|  | if (!blk_bmap) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Emit a block control byte for the current encoded block | 
|  | * with an encoding mode of block bitmap (0x0), not inverse | 
|  | * (0x0) and the current block offset (5 bits) | 
|  | */ | 
|  | skb_put_u8(skb, blk << 3); | 
|  |  | 
|  | /* | 
|  | * Emit the block bitmap for the current encoded block which | 
|  | * contains the present subblocks. | 
|  | */ | 
|  | skb_put_u8(skb, blk_bmap); | 
|  |  | 
|  | /* Emit the present subblocks */ | 
|  | for (sblk = 0; sblk < 8; sblk++) { | 
|  | int sblk_idx = blk * 8 + sblk; | 
|  |  | 
|  | if (!(blk_bmap & BIT(sblk))) | 
|  | continue; | 
|  |  | 
|  | skb_put_u8(skb, ps->tim[sblk_idx]); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ps_data *ps, struct sk_buff *skb, | 
|  | bool is_template) | 
|  | { | 
|  | struct element *tim; | 
|  | bool mcast_traffic = false, have_bits = false; | 
|  | struct ieee80211_bss_conf *link_conf = link->conf; | 
|  | bool s1g = ieee80211_get_link_sband(link)->band == NL80211_BAND_S1GHZ; | 
|  |  | 
|  | /* Generate bitmap for TIM only if there are any STAs in power save | 
|  | * mode. */ | 
|  | if (atomic_read(&ps->num_sta_ps) > 0) | 
|  | /* in the hope that this is faster than | 
|  | * checking byte-for-byte */ | 
|  | have_bits = !bitmap_empty((unsigned long *)ps->tim, | 
|  | IEEE80211_MAX_AID + 1); | 
|  |  | 
|  | if (!is_template) { | 
|  | if (ps->dtim_count == 0) | 
|  | ps->dtim_count = link_conf->dtim_period - 1; | 
|  | else | 
|  | ps->dtim_count--; | 
|  | } | 
|  |  | 
|  | /* Length is set after parsing the AID bitmap */ | 
|  | tim = skb_put(skb, sizeof(struct element)); | 
|  | tim->id = WLAN_EID_TIM; | 
|  | skb_put_u8(skb, ps->dtim_count); | 
|  | skb_put_u8(skb, link_conf->dtim_period); | 
|  |  | 
|  | if (ps->dtim_count == 0 && !skb_queue_empty(&ps->bc_buf)) | 
|  | mcast_traffic = true; | 
|  |  | 
|  | ps->dtim_bc_mc = mcast_traffic; | 
|  |  | 
|  | if (have_bits) { | 
|  | if (s1g) | 
|  | ieee80211_s1g_beacon_add_tim_pvb(ps, skb, | 
|  | mcast_traffic); | 
|  | else | 
|  | ieee80211_beacon_add_tim_pvb(ps, skb, mcast_traffic); | 
|  | } else { | 
|  | /* | 
|  | * If there is no buffered unicast traffic for an S1G | 
|  | * interface, we can exclude the bitmap control. This is in | 
|  | * contrast to other phy types as they do include the bitmap | 
|  | * control and pvb even when there is no buffered traffic. | 
|  | */ | 
|  | if (!s1g) { | 
|  | /* Bitmap control */ | 
|  | skb_put_u8(skb, mcast_traffic); | 
|  | /* Part Virt Bitmap */ | 
|  | skb_put_u8(skb, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | tim->datalen = skb_tail_pointer(skb) - tim->data; | 
|  | } | 
|  |  | 
|  | static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ps_data *ps, struct sk_buff *skb, | 
|  | bool is_template) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | /* | 
|  | * Not very nice, but we want to allow the driver to call | 
|  | * ieee80211_beacon_get() as a response to the set_tim() | 
|  | * callback. That, however, is already invoked under the | 
|  | * sta_lock to guarantee consistent and race-free update | 
|  | * of the tim bitmap in mac80211 and the driver. | 
|  | */ | 
|  | if (local->tim_in_locked_section) { | 
|  | __ieee80211_beacon_add_tim(sdata, link, ps, skb, is_template); | 
|  | } else { | 
|  | spin_lock_bh(&local->tim_lock); | 
|  | __ieee80211_beacon_add_tim(sdata, link, ps, skb, is_template); | 
|  | spin_unlock_bh(&local->tim_lock); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_beacon_cntdwn(struct ieee80211_sub_if_data *sdata, | 
|  | struct beacon_data *beacon, | 
|  | struct ieee80211_link_data *link) | 
|  | { | 
|  | u8 *beacon_data, count, max_count = 1; | 
|  | struct probe_resp *resp; | 
|  | size_t beacon_data_len; | 
|  | u16 *bcn_offsets; | 
|  | int i; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | beacon_data = beacon->tail; | 
|  | beacon_data_len = beacon->tail_len; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | beacon_data = beacon->head; | 
|  | beacon_data_len = beacon->head_len; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | beacon_data = beacon->head; | 
|  | beacon_data_len = beacon->head_len; | 
|  | break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | resp = rcu_dereference(link->u.ap.probe_resp); | 
|  |  | 
|  | bcn_offsets = beacon->cntdwn_counter_offsets; | 
|  | count = beacon->cntdwn_current_counter; | 
|  | if (link->conf->csa_active) | 
|  | max_count = IEEE80211_MAX_CNTDWN_COUNTERS_NUM; | 
|  |  | 
|  | for (i = 0; i < max_count; ++i) { | 
|  | if (bcn_offsets[i]) { | 
|  | if (WARN_ON_ONCE(bcn_offsets[i] >= beacon_data_len)) | 
|  | return; | 
|  | beacon_data[bcn_offsets[i]] = count; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP && resp) { | 
|  | u16 *resp_offsets = resp->cntdwn_counter_offsets; | 
|  |  | 
|  | resp->data[resp_offsets[i]] = count; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static u8 __ieee80211_beacon_update_cntdwn(struct ieee80211_link_data *link, | 
|  | struct beacon_data *beacon) | 
|  | { | 
|  | if (beacon->cntdwn_current_counter == 1) { | 
|  | /* | 
|  | * Channel switch handling is done by a worker thread while | 
|  | * beacons get pulled from hardware timers. It's therefore | 
|  | * possible that software threads are slow enough to not be | 
|  | * able to complete CSA handling in a single beacon interval, | 
|  | * in which case we get here. There isn't much to do about | 
|  | * it, other than letting the user know that the AP isn't | 
|  | * behaving correctly. | 
|  | */ | 
|  | link_err_once(link, | 
|  | "beacon TX faster than countdown (channel/color switch) completion\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | beacon->cntdwn_current_counter--; | 
|  |  | 
|  | return beacon->cntdwn_current_counter; | 
|  | } | 
|  |  | 
|  | u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif, unsigned int link_id) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_link_data *link; | 
|  | struct beacon_data *beacon = NULL; | 
|  | u8 count = 0; | 
|  |  | 
|  | if (WARN_ON(link_id >= IEEE80211_MLD_MAX_NUM_LINKS)) | 
|  | return 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (!link) | 
|  | goto unlock; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | beacon = rcu_dereference(link->u.ap.beacon); | 
|  | else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
|  | beacon = rcu_dereference(sdata->u.ibss.presp); | 
|  | else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | beacon = rcu_dereference(sdata->u.mesh.beacon); | 
|  |  | 
|  | if (!beacon) | 
|  | goto unlock; | 
|  |  | 
|  | count = __ieee80211_beacon_update_cntdwn(link, beacon); | 
|  |  | 
|  | unlock: | 
|  | rcu_read_unlock(); | 
|  | return count; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_update_cntdwn); | 
|  |  | 
|  | void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct beacon_data *beacon = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | beacon = rcu_dereference(sdata->deflink.u.ap.beacon); | 
|  | else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
|  | beacon = rcu_dereference(sdata->u.ibss.presp); | 
|  | else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | beacon = rcu_dereference(sdata->u.mesh.beacon); | 
|  |  | 
|  | if (!beacon) | 
|  | goto unlock; | 
|  |  | 
|  | if (counter < beacon->cntdwn_current_counter) | 
|  | beacon->cntdwn_current_counter = counter; | 
|  |  | 
|  | unlock: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_set_cntdwn); | 
|  |  | 
|  | bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif, | 
|  | unsigned int link_id) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_link_data *link; | 
|  | struct beacon_data *beacon = NULL; | 
|  | u8 *beacon_data; | 
|  | size_t beacon_data_len; | 
|  | int ret = false; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return false; | 
|  |  | 
|  | if (WARN_ON(link_id >= IEEE80211_MLD_MAX_NUM_LINKS)) | 
|  | return 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (!link) | 
|  | goto out; | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_AP) { | 
|  | beacon = rcu_dereference(link->u.ap.beacon); | 
|  | if (WARN_ON(!beacon || !beacon->tail)) | 
|  | goto out; | 
|  | beacon_data = beacon->tail; | 
|  | beacon_data_len = beacon->tail_len; | 
|  | } else if (vif->type == NL80211_IFTYPE_ADHOC) { | 
|  | struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; | 
|  |  | 
|  | beacon = rcu_dereference(ifibss->presp); | 
|  | if (!beacon) | 
|  | goto out; | 
|  |  | 
|  | beacon_data = beacon->head; | 
|  | beacon_data_len = beacon->head_len; | 
|  | } else if (vif->type == NL80211_IFTYPE_MESH_POINT) { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | beacon = rcu_dereference(ifmsh->beacon); | 
|  | if (!beacon) | 
|  | goto out; | 
|  |  | 
|  | beacon_data = beacon->head; | 
|  | beacon_data_len = beacon->head_len; | 
|  | } else { | 
|  | WARN_ON(1); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!beacon->cntdwn_counter_offsets[0]) | 
|  | goto out; | 
|  |  | 
|  | if (WARN_ON_ONCE(beacon->cntdwn_counter_offsets[0] > beacon_data_len)) | 
|  | goto out; | 
|  |  | 
|  | if (beacon_data[beacon->cntdwn_counter_offsets[0]] == 1) | 
|  | ret = true; | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_cntdwn_is_complete); | 
|  |  | 
|  | static int ieee80211_beacon_protect(struct sk_buff *skb, | 
|  | struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_link_data *link) | 
|  | { | 
|  | ieee80211_tx_result res; | 
|  | struct ieee80211_tx_data tx; | 
|  | struct sk_buff *check_skb; | 
|  |  | 
|  | memset(&tx, 0, sizeof(tx)); | 
|  | tx.key = rcu_dereference(link->default_beacon_key); | 
|  | if (!tx.key) | 
|  | return 0; | 
|  |  | 
|  | if (unlikely(tx.key->flags & KEY_FLAG_TAINTED)) { | 
|  | tx.key = NULL; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!(tx.key->conf.flags & IEEE80211_KEY_FLAG_SW_MGMT_TX) && | 
|  | tx.key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
|  | IEEE80211_SKB_CB(skb)->control.hw_key = &tx.key->conf; | 
|  |  | 
|  | tx.local = local; | 
|  | tx.sdata = sdata; | 
|  | __skb_queue_head_init(&tx.skbs); | 
|  | __skb_queue_tail(&tx.skbs, skb); | 
|  | res = ieee80211_tx_h_encrypt(&tx); | 
|  | check_skb = __skb_dequeue(&tx.skbs); | 
|  | /* we may crash after this, but it'd be a bug in crypto */ | 
|  | WARN_ON(check_skb != skb); | 
|  | if (WARN_ON_ONCE(res != TX_CONTINUE)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_beacon_get_finish(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | struct beacon_data *beacon, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_chanctx_conf *chanctx_conf, | 
|  | u16 csa_off_base) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_tx_info *info; | 
|  | enum nl80211_band band; | 
|  | struct ieee80211_tx_rate_control txrc; | 
|  |  | 
|  | /* CSA offsets */ | 
|  | if (offs && beacon) { | 
|  | u16 i; | 
|  |  | 
|  | for (i = 0; i < IEEE80211_MAX_CNTDWN_COUNTERS_NUM; i++) { | 
|  | u16 csa_off = beacon->cntdwn_counter_offsets[i]; | 
|  |  | 
|  | if (!csa_off) | 
|  | continue; | 
|  |  | 
|  | offs->cntdwn_counter_offs[i] = csa_off_base + csa_off; | 
|  | } | 
|  | } | 
|  |  | 
|  | band = chanctx_conf->def.chan->band; | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
|  | info->band = band; | 
|  |  | 
|  | memset(&txrc, 0, sizeof(txrc)); | 
|  | txrc.hw = hw; | 
|  | txrc.sband = local->hw.wiphy->bands[band]; | 
|  | txrc.bss_conf = link->conf; | 
|  | txrc.skb = skb; | 
|  | txrc.reported_rate.idx = -1; | 
|  | if (sdata->beacon_rate_set && sdata->beacon_rateidx_mask[band]) | 
|  | txrc.rate_idx_mask = sdata->beacon_rateidx_mask[band]; | 
|  | else | 
|  | txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; | 
|  | txrc.bss = true; | 
|  | rate_control_get_rate(sdata, NULL, &txrc); | 
|  |  | 
|  | info->control.vif = vif; | 
|  | info->control.flags |= u32_encode_bits(link->link_id, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  | info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT | | 
|  | IEEE80211_TX_CTL_ASSIGN_SEQ | | 
|  | IEEE80211_TX_CTL_FIRST_FRAGMENT; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_beacon_add_mbssid(struct sk_buff *skb, struct beacon_data *beacon, | 
|  | u8 i) | 
|  | { | 
|  | if (!beacon->mbssid_ies || !beacon->mbssid_ies->cnt || | 
|  | i > beacon->mbssid_ies->cnt) | 
|  | return; | 
|  |  | 
|  | if (i < beacon->mbssid_ies->cnt) { | 
|  | skb_put_data(skb, beacon->mbssid_ies->elem[i].data, | 
|  | beacon->mbssid_ies->elem[i].len); | 
|  |  | 
|  | if (beacon->rnr_ies && beacon->rnr_ies->cnt) { | 
|  | skb_put_data(skb, beacon->rnr_ies->elem[i].data, | 
|  | beacon->rnr_ies->elem[i].len); | 
|  |  | 
|  | for (i = beacon->mbssid_ies->cnt; i < beacon->rnr_ies->cnt; i++) | 
|  | skb_put_data(skb, beacon->rnr_ies->elem[i].data, | 
|  | beacon->rnr_ies->elem[i].len); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* i == beacon->mbssid_ies->cnt, include all MBSSID elements */ | 
|  | for (i = 0; i < beacon->mbssid_ies->cnt; i++) | 
|  | skb_put_data(skb, beacon->mbssid_ies->elem[i].data, | 
|  | beacon->mbssid_ies->elem[i].len); | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | __ieee80211_beacon_get_ap(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | bool is_template, | 
|  | struct beacon_data *beacon, | 
|  | struct ieee80211_chanctx_conf *chanctx_conf, | 
|  | u8 ema_index) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_if_ap *ap = &sdata->u.ap; | 
|  | struct sk_buff *skb = NULL; | 
|  | u16 csa_off_base = 0; | 
|  | int mbssid_len; | 
|  |  | 
|  | if (beacon->cntdwn_counter_offsets[0]) { | 
|  | if (!is_template) | 
|  | ieee80211_beacon_update_cntdwn(vif, link->link_id); | 
|  |  | 
|  | ieee80211_set_beacon_cntdwn(sdata, beacon, link); | 
|  | } | 
|  |  | 
|  | /* headroom, head length, | 
|  | * tail length, maximum TIM length and multiple BSSID length | 
|  | */ | 
|  | mbssid_len = ieee80211_get_mbssid_beacon_len(beacon->mbssid_ies, | 
|  | beacon->rnr_ies, | 
|  | ema_index); | 
|  |  | 
|  | skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + | 
|  | beacon->tail_len + 256 + | 
|  | local->hw.extra_beacon_tailroom + mbssid_len); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(skb, local->tx_headroom); | 
|  | skb_put_data(skb, beacon->head, beacon->head_len); | 
|  |  | 
|  | ieee80211_beacon_add_tim(sdata, link, &ap->ps, skb, is_template); | 
|  |  | 
|  | if (offs) { | 
|  | offs->tim_offset = beacon->head_len; | 
|  | offs->tim_length = skb->len - beacon->head_len; | 
|  | offs->cntdwn_counter_offs[0] = beacon->cntdwn_counter_offsets[0]; | 
|  |  | 
|  | if (mbssid_len) { | 
|  | ieee80211_beacon_add_mbssid(skb, beacon, ema_index); | 
|  | offs->mbssid_off = skb->len - mbssid_len; | 
|  | } | 
|  |  | 
|  | /* for AP the csa offsets are from tail */ | 
|  | csa_off_base = skb->len; | 
|  | } | 
|  |  | 
|  | if (beacon->tail) | 
|  | skb_put_data(skb, beacon->tail, beacon->tail_len); | 
|  |  | 
|  | if (ieee80211_beacon_protect(skb, local, sdata, link) < 0) { | 
|  | dev_kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | ieee80211_beacon_get_finish(hw, vif, link, offs, beacon, skb, | 
|  | chanctx_conf, csa_off_base); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_s1g_need_long_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_link_data *link) | 
|  | { | 
|  | struct ps_data *ps = &sdata->u.ap.ps; | 
|  |  | 
|  | if (ps->sb_count == 0) | 
|  | ps->sb_count = link->conf->s1g_long_beacon_period - 1; | 
|  | else | 
|  | ps->sb_count--; | 
|  |  | 
|  | return ps->sb_count == 0; | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | ieee80211_s1g_short_beacon_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ieee80211_chanctx_conf *chanctx_conf, | 
|  | struct s1g_short_beacon_data *sb, | 
|  | bool is_template) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_if_ap *ap = &sdata->u.ap; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = dev_alloc_skb(local->tx_headroom + sb->short_head_len + | 
|  | sb->short_tail_len + 256 + | 
|  | local->hw.extra_beacon_tailroom); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(skb, local->tx_headroom); | 
|  | skb_put_data(skb, sb->short_head, sb->short_head_len); | 
|  |  | 
|  | ieee80211_beacon_add_tim(sdata, link, &ap->ps, skb, is_template); | 
|  |  | 
|  | if (sb->short_tail) | 
|  | skb_put_data(skb, sb->short_tail, sb->short_tail_len); | 
|  |  | 
|  | ieee80211_beacon_get_finish(hw, vif, link, NULL, NULL, skb, | 
|  | chanctx_conf, 0); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | ieee80211_beacon_get_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | bool is_template, struct beacon_data *beacon, | 
|  | struct ieee80211_chanctx_conf *chanctx_conf, | 
|  | u8 ema_index, struct s1g_short_beacon_data *s1g_sb) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | if (!sdata->vif.cfg.s1g || !s1g_sb || | 
|  | ieee80211_s1g_need_long_beacon(sdata, link)) | 
|  | return __ieee80211_beacon_get_ap(hw, vif, link, offs, | 
|  | is_template, beacon, | 
|  | chanctx_conf, ema_index); | 
|  |  | 
|  | return ieee80211_s1g_short_beacon_get(hw, vif, link, chanctx_conf, | 
|  | s1g_sb, is_template); | 
|  | } | 
|  |  | 
|  | static struct ieee80211_ema_beacons * | 
|  | ieee80211_beacon_get_ap_ema_list(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_link_data *link, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | bool is_template, struct beacon_data *beacon, | 
|  | struct ieee80211_chanctx_conf *chanctx_conf) | 
|  | { | 
|  | struct ieee80211_ema_beacons *ema = NULL; | 
|  |  | 
|  | if (!beacon->mbssid_ies || !beacon->mbssid_ies->cnt) | 
|  | return NULL; | 
|  |  | 
|  | ema = kzalloc(struct_size(ema, bcn, beacon->mbssid_ies->cnt), | 
|  | GFP_ATOMIC); | 
|  | if (!ema) | 
|  | return NULL; | 
|  |  | 
|  | for (ema->cnt = 0; ema->cnt < beacon->mbssid_ies->cnt; ema->cnt++) { | 
|  | ema->bcn[ema->cnt].skb = | 
|  | ieee80211_beacon_get_ap(hw, vif, link, | 
|  | &ema->bcn[ema->cnt].offs, | 
|  | is_template, beacon, | 
|  | chanctx_conf, ema->cnt, NULL); | 
|  | if (!ema->bcn[ema->cnt].skb) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ema->cnt == beacon->mbssid_ies->cnt) | 
|  | return ema; | 
|  |  | 
|  | ieee80211_beacon_free_ema_list(ema); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #define IEEE80211_INCLUDE_ALL_MBSSID_ELEMS -1 | 
|  |  | 
|  | static struct sk_buff * | 
|  | __ieee80211_beacon_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | bool is_template, | 
|  | unsigned int link_id, | 
|  | int ema_index, | 
|  | struct ieee80211_ema_beacons **ema_beacons) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct beacon_data *beacon = NULL; | 
|  | struct sk_buff *skb = NULL; | 
|  | struct ieee80211_sub_if_data *sdata = NULL; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct ieee80211_link_data *link; | 
|  | struct s1g_short_beacon_data *s1g_short_bcn = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sdata = vif_to_sdata(vif); | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (!link) | 
|  | goto out; | 
|  | chanctx_conf = | 
|  | rcu_dereference(link->conf->chanctx_conf); | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata) || !chanctx_conf) | 
|  | goto out; | 
|  |  | 
|  | if (offs) | 
|  | memset(offs, 0, sizeof(*offs)); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | beacon = rcu_dereference(link->u.ap.beacon); | 
|  | if (!beacon) | 
|  | goto out; | 
|  |  | 
|  | if (vif->cfg.s1g && link->u.ap.s1g_short_beacon) { | 
|  | s1g_short_bcn = | 
|  | rcu_dereference(link->u.ap.s1g_short_beacon); | 
|  | if (!s1g_short_bcn) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ema_beacons) { | 
|  | *ema_beacons = | 
|  | ieee80211_beacon_get_ap_ema_list(hw, vif, link, | 
|  | offs, | 
|  | is_template, | 
|  | beacon, | 
|  | chanctx_conf); | 
|  | } else { | 
|  | if (beacon->mbssid_ies && beacon->mbssid_ies->cnt) { | 
|  | if (ema_index >= beacon->mbssid_ies->cnt) | 
|  | goto out; /* End of MBSSID elements */ | 
|  |  | 
|  | if (ema_index <= IEEE80211_INCLUDE_ALL_MBSSID_ELEMS) | 
|  | ema_index = beacon->mbssid_ies->cnt; | 
|  | } else { | 
|  | ema_index = 0; | 
|  | } | 
|  |  | 
|  | skb = ieee80211_beacon_get_ap(hw, vif, link, offs, | 
|  | is_template, beacon, | 
|  | chanctx_conf, ema_index, | 
|  | s1g_short_bcn); | 
|  | } | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; | 
|  | struct ieee80211_hdr *hdr; | 
|  |  | 
|  | beacon = rcu_dereference(ifibss->presp); | 
|  | if (!beacon) | 
|  | goto out; | 
|  |  | 
|  | if (beacon->cntdwn_counter_offsets[0]) { | 
|  | if (!is_template) | 
|  | __ieee80211_beacon_update_cntdwn(link, beacon); | 
|  |  | 
|  | ieee80211_set_beacon_cntdwn(sdata, beacon, link); | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + | 
|  | local->hw.extra_beacon_tailroom); | 
|  | if (!skb) | 
|  | goto out; | 
|  | skb_reserve(skb, local->tx_headroom); | 
|  | skb_put_data(skb, beacon->head, beacon->head_len); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_BEACON); | 
|  |  | 
|  | ieee80211_beacon_get_finish(hw, vif, link, offs, beacon, skb, | 
|  | chanctx_conf, 0); | 
|  | } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | beacon = rcu_dereference(ifmsh->beacon); | 
|  | if (!beacon) | 
|  | goto out; | 
|  |  | 
|  | if (beacon->cntdwn_counter_offsets[0]) { | 
|  | if (!is_template) | 
|  | /* TODO: For mesh csa_counter is in TU, so | 
|  | * decrementing it by one isn't correct, but | 
|  | * for now we leave it consistent with overall | 
|  | * mac80211's behavior. | 
|  | */ | 
|  | __ieee80211_beacon_update_cntdwn(link, beacon); | 
|  |  | 
|  | ieee80211_set_beacon_cntdwn(sdata, beacon, link); | 
|  | } | 
|  |  | 
|  | if (ifmsh->sync_ops) | 
|  | ifmsh->sync_ops->adjust_tsf(sdata, beacon); | 
|  |  | 
|  | skb = dev_alloc_skb(local->tx_headroom + | 
|  | beacon->head_len + | 
|  | 256 + /* TIM IE */ | 
|  | beacon->tail_len + | 
|  | local->hw.extra_beacon_tailroom); | 
|  | if (!skb) | 
|  | goto out; | 
|  | skb_reserve(skb, local->tx_headroom); | 
|  | skb_put_data(skb, beacon->head, beacon->head_len); | 
|  | ieee80211_beacon_add_tim(sdata, link, &ifmsh->ps, skb, | 
|  | is_template); | 
|  |  | 
|  | if (offs) { | 
|  | offs->tim_offset = beacon->head_len; | 
|  | offs->tim_length = skb->len - beacon->head_len; | 
|  | } | 
|  |  | 
|  | skb_put_data(skb, beacon->tail, beacon->tail_len); | 
|  | ieee80211_beacon_get_finish(hw, vif, link, offs, beacon, skb, | 
|  | chanctx_conf, 0); | 
|  | } else { | 
|  | WARN_ON(1); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return skb; | 
|  |  | 
|  | } | 
|  |  | 
|  | struct sk_buff * | 
|  | ieee80211_beacon_get_template(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | unsigned int link_id) | 
|  | { | 
|  | return __ieee80211_beacon_get(hw, vif, offs, true, link_id, | 
|  | IEEE80211_INCLUDE_ALL_MBSSID_ELEMS, NULL); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_get_template); | 
|  |  | 
|  | struct sk_buff * | 
|  | ieee80211_beacon_get_template_ema_index(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_mutable_offsets *offs, | 
|  | unsigned int link_id, u8 ema_index) | 
|  | { | 
|  | return __ieee80211_beacon_get(hw, vif, offs, true, link_id, ema_index, | 
|  | NULL); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_get_template_ema_index); | 
|  |  | 
|  | void ieee80211_beacon_free_ema_list(struct ieee80211_ema_beacons *ema_beacons) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | if (!ema_beacons) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < ema_beacons->cnt; i++) | 
|  | kfree_skb(ema_beacons->bcn[i].skb); | 
|  |  | 
|  | kfree(ema_beacons); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_free_ema_list); | 
|  |  | 
|  | struct ieee80211_ema_beacons * | 
|  | ieee80211_beacon_get_template_ema_list(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | unsigned int link_id) | 
|  | { | 
|  | struct ieee80211_ema_beacons *ema_beacons = NULL; | 
|  |  | 
|  | WARN_ON(__ieee80211_beacon_get(hw, vif, NULL, true, link_id, 0, | 
|  | &ema_beacons)); | 
|  |  | 
|  | return ema_beacons; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_get_template_ema_list); | 
|  |  | 
|  | struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | u16 *tim_offset, u16 *tim_length, | 
|  | unsigned int link_id) | 
|  | { | 
|  | struct ieee80211_mutable_offsets offs = {}; | 
|  | struct sk_buff *bcn = __ieee80211_beacon_get(hw, vif, &offs, false, | 
|  | link_id, | 
|  | IEEE80211_INCLUDE_ALL_MBSSID_ELEMS, | 
|  | NULL); | 
|  | struct sk_buff *copy; | 
|  |  | 
|  | if (!bcn) | 
|  | return bcn; | 
|  |  | 
|  | if (tim_offset) | 
|  | *tim_offset = offs.tim_offset; | 
|  |  | 
|  | if (tim_length) | 
|  | *tim_length = offs.tim_length; | 
|  |  | 
|  | if (ieee80211_hw_check(hw, BEACON_TX_STATUS) || | 
|  | !hw_to_local(hw)->monitors) | 
|  | return bcn; | 
|  |  | 
|  | /* send a copy to monitor interfaces */ | 
|  | copy = skb_copy(bcn, GFP_ATOMIC); | 
|  | if (!copy) | 
|  | return bcn; | 
|  |  | 
|  | ieee80211_tx_monitor(hw_to_local(hw), copy, 1, NULL); | 
|  |  | 
|  | return bcn; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_get_tim); | 
|  |  | 
|  | struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | struct probe_resp *presp = NULL; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | return NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | presp = rcu_dereference(sdata->deflink.u.ap.probe_resp); | 
|  | if (!presp) | 
|  | goto out; | 
|  |  | 
|  | skb = dev_alloc_skb(presp->len); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | skb_put_data(skb, presp->data, presp->len); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  | memset(hdr->addr1, 0, sizeof(hdr->addr1)); | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_proberesp_get); | 
|  |  | 
|  | struct sk_buff *ieee80211_get_fils_discovery_tmpl(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | struct fils_discovery_data *tmpl = NULL; | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | return NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | tmpl = rcu_dereference(sdata->deflink.u.ap.fils_discovery); | 
|  | if (!tmpl) { | 
|  | rcu_read_unlock(); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom + tmpl->len); | 
|  | if (skb) { | 
|  | skb_reserve(skb, sdata->local->hw.extra_tx_headroom); | 
|  | skb_put_data(skb, tmpl->data, tmpl->len); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_fils_discovery_tmpl); | 
|  |  | 
|  | struct sk_buff * | 
|  | ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | struct unsol_bcast_probe_resp_data *tmpl = NULL; | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | return NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | tmpl = rcu_dereference(sdata->deflink.u.ap.unsol_bcast_probe_resp); | 
|  | if (!tmpl) { | 
|  | rcu_read_unlock(); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom + tmpl->len); | 
|  | if (skb) { | 
|  | skb_reserve(skb, sdata->local->hw.extra_tx_headroom); | 
|  | skb_put_data(skb, tmpl->data, tmpl->len); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_unsol_bcast_probe_resp_tmpl); | 
|  |  | 
|  | struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_pspoll *pspoll; | 
|  | struct ieee80211_local *local; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | 
|  | return NULL; | 
|  |  | 
|  | sdata = vif_to_sdata(vif); | 
|  | local = sdata->local; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll)); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | pspoll = skb_put_zero(skb, sizeof(*pspoll)); | 
|  | pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | | 
|  | IEEE80211_STYPE_PSPOLL); | 
|  | pspoll->aid = cpu_to_le16(sdata->vif.cfg.aid); | 
|  |  | 
|  | /* aid in PS-Poll has its two MSBs each set to 1 */ | 
|  | pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14); | 
|  |  | 
|  | memcpy(pspoll->bssid, sdata->deflink.u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(pspoll->ta, vif->addr, ETH_ALEN); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_pspoll_get); | 
|  |  | 
|  | struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | int link_id, bool qos_ok) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_link_data *link = NULL; | 
|  | struct ieee80211_hdr_3addr *nullfunc; | 
|  | struct sk_buff *skb; | 
|  | bool qos = false; | 
|  |  | 
|  | if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | 
|  | return NULL; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + | 
|  | sizeof(*nullfunc) + 2); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (qos_ok) { | 
|  | struct sta_info *sta; | 
|  |  | 
|  | sta = sta_info_get(sdata, vif->cfg.ap_addr); | 
|  | qos = sta && sta->sta.wme; | 
|  | } | 
|  |  | 
|  | if (link_id >= 0) { | 
|  | link = rcu_dereference(sdata->link[link_id]); | 
|  | if (WARN_ON_ONCE(!link)) { | 
|  | rcu_read_unlock(); | 
|  | kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | nullfunc = skb_put_zero(skb, sizeof(*nullfunc)); | 
|  | nullfunc->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_NULLFUNC | | 
|  | IEEE80211_FCTL_TODS); | 
|  | if (qos) { | 
|  | __le16 qoshdr = cpu_to_le16(7); | 
|  |  | 
|  | BUILD_BUG_ON((IEEE80211_STYPE_QOS_NULLFUNC | | 
|  | IEEE80211_STYPE_NULLFUNC) != | 
|  | IEEE80211_STYPE_QOS_NULLFUNC); | 
|  | nullfunc->frame_control |= | 
|  | cpu_to_le16(IEEE80211_STYPE_QOS_NULLFUNC); | 
|  | skb->priority = 7; | 
|  | skb_set_queue_mapping(skb, IEEE80211_AC_VO); | 
|  | skb_put_data(skb, &qoshdr, sizeof(qoshdr)); | 
|  | } | 
|  |  | 
|  | if (link) { | 
|  | memcpy(nullfunc->addr1, link->conf->bssid, ETH_ALEN); | 
|  | memcpy(nullfunc->addr2, link->conf->addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr3, link->conf->bssid, ETH_ALEN); | 
|  | } else { | 
|  | memcpy(nullfunc->addr1, vif->cfg.ap_addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr2, vif->addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr3, vif->cfg.ap_addr, ETH_ALEN); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_nullfunc_get); | 
|  |  | 
|  | struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, | 
|  | const u8 *src_addr, | 
|  | const u8 *ssid, size_t ssid_len, | 
|  | size_t tailroom) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_hdr_3addr *hdr; | 
|  | struct sk_buff *skb; | 
|  | size_t ie_ssid_len; | 
|  | u8 *pos; | 
|  |  | 
|  | ie_ssid_len = 2 + ssid_len; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*hdr) + | 
|  | ie_ssid_len + tailroom); | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | hdr = skb_put_zero(skb, sizeof(*hdr)); | 
|  | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_PROBE_REQ); | 
|  | eth_broadcast_addr(hdr->addr1); | 
|  | memcpy(hdr->addr2, src_addr, ETH_ALEN); | 
|  | eth_broadcast_addr(hdr->addr3); | 
|  |  | 
|  | pos = skb_put(skb, ie_ssid_len); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = ssid_len; | 
|  | if (ssid_len) | 
|  | memcpy(pos, ssid, ssid_len); | 
|  | pos += ssid_len; | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_probereq_get); | 
|  |  | 
|  | void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
|  | const void *frame, size_t frame_len, | 
|  | const struct ieee80211_tx_info *frame_txctl, | 
|  | struct ieee80211_rts *rts) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = frame; | 
|  |  | 
|  | rts->frame_control = | 
|  | cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | 
|  | rts->duration = ieee80211_rts_duration(hw, vif, frame_len, | 
|  | frame_txctl); | 
|  | memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | 
|  | memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_rts_get); | 
|  |  | 
|  | void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
|  | const void *frame, size_t frame_len, | 
|  | const struct ieee80211_tx_info *frame_txctl, | 
|  | struct ieee80211_cts *cts) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = frame; | 
|  |  | 
|  | cts->frame_control = | 
|  | cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | 
|  | cts->duration = ieee80211_ctstoself_duration(hw, vif, | 
|  | frame_len, frame_txctl); | 
|  | memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_ctstoself_get); | 
|  |  | 
|  | struct sk_buff * | 
|  | ieee80211_get_buffered_bc(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct sk_buff *skb = NULL; | 
|  | struct ieee80211_tx_data tx; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ps_data *ps; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  |  | 
|  | sdata = vif_to_sdata(vif); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  |  | 
|  | if (!chanctx_conf) | 
|  | goto out; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | struct beacon_data *beacon = | 
|  | rcu_dereference(sdata->deflink.u.ap.beacon); | 
|  |  | 
|  | if (!beacon || !beacon->head) | 
|  | goto out; | 
|  |  | 
|  | ps = &sdata->u.ap.ps; | 
|  | } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | ps = &sdata->u.mesh.ps; | 
|  | } else { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ps->dtim_count != 0 || !ps->dtim_bc_mc) | 
|  | goto out; /* send buffered bc/mc only after DTIM beacon */ | 
|  |  | 
|  | while (1) { | 
|  | skb = skb_dequeue(&ps->bc_buf); | 
|  | if (!skb) | 
|  | goto out; | 
|  | local->total_ps_buffered--; | 
|  |  | 
|  | if (!skb_queue_empty(&ps->bc_buf) && skb->len >= 2) { | 
|  | struct ieee80211_hdr *hdr = | 
|  | (struct ieee80211_hdr *) skb->data; | 
|  | /* more buffered multicast/broadcast frames ==> set | 
|  | * MoreData flag in IEEE 802.11 header to inform PS | 
|  | * STAs */ | 
|  | hdr->frame_control |= | 
|  | cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); | 
|  | if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb)) | 
|  | break; | 
|  | ieee80211_free_txskb(hw, skb); | 
|  | } | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | tx.flags |= IEEE80211_TX_PS_BUFFERED; | 
|  | info->band = chanctx_conf->def.chan->band; | 
|  |  | 
|  | if (invoke_tx_handlers(&tx)) | 
|  | skb = NULL; | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_buffered_bc); | 
|  |  | 
|  | int ieee80211_reserve_tid(struct ieee80211_sta *pubsta, u8 tid) | 
|  | { | 
|  | struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int ret; | 
|  | u32 queues; | 
|  |  | 
|  | lockdep_assert_wiphy(local->hw.wiphy); | 
|  |  | 
|  | /* only some cases are supported right now */ | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(tid >= IEEE80211_NUM_UPS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (sta->reserved_tid == tid) { | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (sta->reserved_tid != IEEE80211_TID_UNRESERVED) { | 
|  | sdata_err(sdata, "TID reservation already active\n"); | 
|  | ret = -EALREADY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ieee80211_stop_vif_queues(sdata->local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); | 
|  |  | 
|  | synchronize_net(); | 
|  |  | 
|  | /* Tear down BA sessions so we stop aggregating on this TID */ | 
|  | if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) { | 
|  | set_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
|  | __ieee80211_stop_tx_ba_session(sta, tid, | 
|  | AGG_STOP_LOCAL_REQUEST); | 
|  | } | 
|  |  | 
|  | queues = BIT(sdata->vif.hw_queue[ieee802_1d_to_ac[tid]]); | 
|  | __ieee80211_flush_queues(local, sdata, queues, false); | 
|  |  | 
|  | sta->reserved_tid = tid; | 
|  |  | 
|  | ieee80211_wake_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); | 
|  |  | 
|  | if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) | 
|  | clear_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
|  |  | 
|  | ret = 0; | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_reserve_tid); | 
|  |  | 
|  | void ieee80211_unreserve_tid(struct ieee80211_sta *pubsta, u8 tid) | 
|  | { | 
|  | struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  |  | 
|  | lockdep_assert_wiphy(sdata->local->hw.wiphy); | 
|  |  | 
|  | /* only some cases are supported right now */ | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (tid != sta->reserved_tid) { | 
|  | sdata_err(sdata, "TID to unreserve (%d) isn't reserved\n", tid); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sta->reserved_tid = IEEE80211_TID_UNRESERVED; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_unreserve_tid); | 
|  |  | 
|  | void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, int tid, int link_id, | 
|  | enum nl80211_band band) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | int ac = ieee80211_ac_from_tid(tid); | 
|  | unsigned int link; | 
|  |  | 
|  | skb_reset_mac_header(skb); | 
|  | skb_set_queue_mapping(skb, ac); | 
|  | skb->priority = tid; | 
|  |  | 
|  | skb->dev = sdata->dev; | 
|  |  | 
|  | BUILD_BUG_ON(IEEE80211_LINK_UNSPECIFIED < IEEE80211_MLD_MAX_NUM_LINKS); | 
|  | BUILD_BUG_ON(!FIELD_FIT(IEEE80211_TX_CTRL_MLO_LINK, | 
|  | IEEE80211_LINK_UNSPECIFIED)); | 
|  |  | 
|  | if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | link = 0; | 
|  | } else if (link_id >= 0) { | 
|  | link = link_id; | 
|  | } else if (memcmp(sdata->vif.addr, hdr->addr2, ETH_ALEN) == 0) { | 
|  | /* address from the MLD */ | 
|  | link = IEEE80211_LINK_UNSPECIFIED; | 
|  | } else { | 
|  | /* otherwise must be addressed from a link */ | 
|  | rcu_read_lock(); | 
|  | for (link = 0; link < ARRAY_SIZE(sdata->vif.link_conf); link++) { | 
|  | struct ieee80211_bss_conf *link_conf; | 
|  |  | 
|  | link_conf = rcu_dereference(sdata->vif.link_conf[link]); | 
|  | if (!link_conf) | 
|  | continue; | 
|  | if (memcmp(link_conf->addr, hdr->addr2, ETH_ALEN) == 0) | 
|  | break; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (WARN_ON_ONCE(link == ARRAY_SIZE(sdata->vif.link_conf))) | 
|  | link = ffs(sdata->vif.active_links) - 1; | 
|  | } | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->control.flags |= | 
|  | u32_encode_bits(link, IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | /* | 
|  | * The other path calling ieee80211_xmit is from the tasklet, | 
|  | * and while we can handle concurrent transmissions locking | 
|  | * requirements are that we do not come into tx with bhs on. | 
|  | */ | 
|  | local_bh_disable(); | 
|  | IEEE80211_SKB_CB(skb)->band = band; | 
|  | ieee80211_xmit(sdata, NULL, skb); | 
|  | local_bh_enable(); | 
|  | } | 
|  |  | 
|  | void ieee80211_tx_skb_tid(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, int tid, int link_id) | 
|  | { | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | enum nl80211_band band; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (sdata->vif.type == NL80211_IFTYPE_NAN) { | 
|  | band = NUM_NL80211_BANDS; | 
|  | } else if (!ieee80211_vif_is_mld(&sdata->vif)) { | 
|  | WARN_ON(link_id >= 0); | 
|  | chanctx_conf = | 
|  | rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) { | 
|  | rcu_read_unlock(); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  | band = chanctx_conf->def.chan->band; | 
|  | } else { | 
|  | WARN_ON(link_id >= 0 && | 
|  | !(sdata->vif.active_links & BIT(link_id))); | 
|  | /* MLD transmissions must not rely on the band */ | 
|  | band = 0; | 
|  | } | 
|  |  | 
|  | __ieee80211_tx_skb_tid_band(sdata, skb, tid, link_id, band); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *buf, size_t len, | 
|  | const u8 *dest, __be16 proto, bool unencrypted, | 
|  | int link_id, u64 *cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | struct sk_buff *skb; | 
|  | struct ethhdr *ehdr; | 
|  | u32 ctrl_flags = 0; | 
|  | u32 flags = 0; | 
|  | int err; | 
|  |  | 
|  | /* mutex lock is only needed for incrementing the cookie counter */ | 
|  | lockdep_assert_wiphy(local->hw.wiphy); | 
|  |  | 
|  | /* Only accept CONTROL_PORT_PROTOCOL configured in CONNECT/ASSOCIATE | 
|  | * or Pre-Authentication | 
|  | */ | 
|  | if (proto != sdata->control_port_protocol && | 
|  | proto != cpu_to_be16(ETH_P_PREAUTH)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (proto == sdata->control_port_protocol) | 
|  | ctrl_flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO | | 
|  | IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP; | 
|  |  | 
|  | if (unencrypted) | 
|  | flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  |  | 
|  | if (cookie) | 
|  | ctrl_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
|  |  | 
|  | flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + | 
|  | sizeof(struct ethhdr) + len); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom + sizeof(struct ethhdr)); | 
|  |  | 
|  | skb_put_data(skb, buf, len); | 
|  |  | 
|  | ehdr = skb_push(skb, sizeof(struct ethhdr)); | 
|  | memcpy(ehdr->h_dest, dest, ETH_ALEN); | 
|  |  | 
|  | /* we may override the SA for MLO STA later */ | 
|  | if (link_id < 0) { | 
|  | ctrl_flags |= u32_encode_bits(IEEE80211_LINK_UNSPECIFIED, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  | memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN); | 
|  | } else { | 
|  | struct ieee80211_bss_conf *link_conf; | 
|  |  | 
|  | ctrl_flags |= u32_encode_bits(link_id, | 
|  | IEEE80211_TX_CTRL_MLO_LINK); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | link_conf = rcu_dereference(sdata->vif.link_conf[link_id]); | 
|  | if (!link_conf) { | 
|  | dev_kfree_skb(skb); | 
|  | rcu_read_unlock(); | 
|  | return -ENOLINK; | 
|  | } | 
|  | memcpy(ehdr->h_source, link_conf->addr, ETH_ALEN); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | ehdr->h_proto = proto; | 
|  |  | 
|  | skb->dev = dev; | 
|  | skb->protocol = proto; | 
|  | skb_reset_network_header(skb); | 
|  | skb_reset_mac_header(skb); | 
|  |  | 
|  | if (local->hw.queues < IEEE80211_NUM_ACS) | 
|  | goto start_xmit; | 
|  |  | 
|  | /* update QoS header to prioritize control port frames if possible, | 
|  | * prioritization also happens for control port frames send over | 
|  | * AF_PACKET | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | err = ieee80211_lookup_ra_sta(sdata, skb, &sta); | 
|  | if (err) { | 
|  | dev_kfree_skb(skb); | 
|  | rcu_read_unlock(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (!IS_ERR(sta)) { | 
|  | u16 queue = ieee80211_select_queue(sdata, sta, skb); | 
|  |  | 
|  | skb_set_queue_mapping(skb, queue); | 
|  |  | 
|  | /* | 
|  | * for MLO STA, the SA should be the AP MLD address, but | 
|  | * the link ID has been selected already | 
|  | */ | 
|  | if (sta && sta->sta.mlo) | 
|  | memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | start_xmit: | 
|  | local_bh_disable(); | 
|  | __ieee80211_subif_start_xmit(skb, skb->dev, flags, ctrl_flags, cookie); | 
|  | local_bh_enable(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *buf, size_t len) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + len + | 
|  | 30 + /* header size */ | 
|  | 18); /* 11s header size */ | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  | skb_put_data(skb, buf, len); | 
|  |  | 
|  | skb->dev = dev; | 
|  | skb->protocol = htons(ETH_P_802_3); | 
|  | skb_reset_network_header(skb); | 
|  | skb_reset_mac_header(skb); | 
|  |  | 
|  | local_bh_disable(); | 
|  | __ieee80211_subif_start_xmit(skb, skb->dev, 0, | 
|  | IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP, | 
|  | NULL); | 
|  | local_bh_enable(); | 
|  |  | 
|  | return 0; | 
|  | } |