blob: 4105df74f2b06f74dee219d86d9f390af58a3144 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
* extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
* Copyright (C) 2008 Google, Inc.
* Author: Mike Lockwood <>
* Modified by MyungJoo Ham <> to support extcon
* (originally switch class is supported)
#include <linux/devm-helpers.h>
#include <linux/extcon-provider.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
* struct gpio_extcon_data - A simple GPIO-controlled extcon device state container.
* @edev: Extcon device.
* @work: Work fired by the interrupt.
* @debounce_jiffies: Number of jiffies to wait for the GPIO to stabilize, from the debounce
* value.
* @gpiod: GPIO descriptor for this external connector.
* @extcon_id: The unique id of specific external connector.
* @debounce: Debounce time for GPIO IRQ in ms.
* @check_on_resume: Boolean describing whether to check the state of gpio
* while resuming from sleep.
struct gpio_extcon_data {
struct extcon_dev *edev;
struct delayed_work work;
unsigned long debounce_jiffies;
struct gpio_desc *gpiod;
unsigned int extcon_id;
unsigned long debounce;
bool check_on_resume;
static void gpio_extcon_work(struct work_struct *work)
int state;
struct gpio_extcon_data *data =
container_of(to_delayed_work(work), struct gpio_extcon_data,
state = gpiod_get_value_cansleep(data->gpiod);
extcon_set_state_sync(data->edev, data->extcon_id, state);
static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
struct gpio_extcon_data *data = dev_id;
queue_delayed_work(system_power_efficient_wq, &data->work,
static int gpio_extcon_probe(struct platform_device *pdev)
struct gpio_extcon_data *data;
struct device *dev = &pdev->dev;
unsigned long irq_flags;
int irq;
int ret;
data = devm_kzalloc(dev, sizeof(struct gpio_extcon_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
* FIXME: extcon_id represents the unique identifier of external
* connectors such as EXTCON_USB, EXTCON_DISP_HDMI and so on. extcon_id
* is necessary to register the extcon device. But, it's not yet
* developed to get the extcon id from device-tree or others.
* On later, it have to be solved.
if (data->extcon_id > EXTCON_NONE)
return -EINVAL;
data->gpiod = devm_gpiod_get(dev, "extcon", GPIOD_IN);
if (IS_ERR(data->gpiod))
return PTR_ERR(data->gpiod);
irq = gpiod_to_irq(data->gpiod);
if (irq <= 0)
return irq;
* It is unlikely that this is an acknowledged interrupt that goes
* away after handling, what we are looking for are falling edges
* if the signal is active low, and rising edges if the signal is
* active high.
if (gpiod_is_active_low(data->gpiod))
/* Allocate the memory of extcon devie and register extcon device */
data->edev = devm_extcon_dev_allocate(dev, &data->extcon_id);
if (IS_ERR(data->edev)) {
dev_err(dev, "failed to allocate extcon device\n");
return -ENOMEM;
ret = devm_extcon_dev_register(dev, data->edev);
if (ret < 0)
return ret;
ret = devm_delayed_work_autocancel(dev, &data->work, gpio_extcon_work);
if (ret)
return ret;
* Request the interrupt of gpio to detect whether external connector
* is attached or detached.
ret = devm_request_any_context_irq(dev, irq,
gpio_irq_handler, irq_flags,
pdev->name, data);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, data);
/* Perform initial detection */
return 0;
static int gpio_extcon_resume(struct device *dev)
struct gpio_extcon_data *data;
data = dev_get_drvdata(dev);
if (data->check_on_resume)
&data->work, data->debounce_jiffies);
return 0;
static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.driver = {
.name = "extcon-gpio",
.pm = &gpio_extcon_pm_ops,
MODULE_AUTHOR("Mike Lockwood <>");