|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * pwm-fan.c - Hwmon driver for fans connected to PWM lines. | 
|  | * | 
|  | * Copyright (c) 2014 Samsung Electronics Co., Ltd. | 
|  | * | 
|  | * Author: Kamil Debski <k.debski@samsung.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pwm.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/thermal.h> | 
|  | #include <linux/timer.h> | 
|  |  | 
|  | #define MAX_PWM 255 | 
|  |  | 
|  | struct pwm_fan_ctx { | 
|  | struct mutex lock; | 
|  | struct pwm_device *pwm; | 
|  | struct regulator *reg_en; | 
|  |  | 
|  | int irq; | 
|  | atomic_t pulses; | 
|  | unsigned int rpm; | 
|  | u8 pulses_per_revolution; | 
|  | ktime_t sample_start; | 
|  | struct timer_list rpm_timer; | 
|  |  | 
|  | unsigned int pwm_value; | 
|  | unsigned int pwm_fan_state; | 
|  | unsigned int pwm_fan_max_state; | 
|  | unsigned int *pwm_fan_cooling_levels; | 
|  | struct thermal_cooling_device *cdev; | 
|  | }; | 
|  |  | 
|  | /* This handler assumes self resetting edge triggered interrupt. */ | 
|  | static irqreturn_t pulse_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_id; | 
|  |  | 
|  | atomic_inc(&ctx->pulses); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void sample_timer(struct timer_list *t) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer); | 
|  | int pulses; | 
|  | u64 tmp; | 
|  |  | 
|  | pulses = atomic_read(&ctx->pulses); | 
|  | atomic_sub(pulses, &ctx->pulses); | 
|  | tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60; | 
|  | do_div(tmp, ctx->pulses_per_revolution * 1000); | 
|  | ctx->rpm = tmp; | 
|  |  | 
|  | ctx->sample_start = ktime_get(); | 
|  | mod_timer(&ctx->rpm_timer, jiffies + HZ); | 
|  | } | 
|  |  | 
|  | static int  __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm) | 
|  | { | 
|  | unsigned long period; | 
|  | int ret = 0; | 
|  | struct pwm_state state = { }; | 
|  |  | 
|  | mutex_lock(&ctx->lock); | 
|  | if (ctx->pwm_value == pwm) | 
|  | goto exit_set_pwm_err; | 
|  |  | 
|  | pwm_init_state(ctx->pwm, &state); | 
|  | period = ctx->pwm->args.period; | 
|  | state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); | 
|  | state.enabled = pwm ? true : false; | 
|  |  | 
|  | ret = pwm_apply_state(ctx->pwm, &state); | 
|  | if (!ret) | 
|  | ctx->pwm_value = pwm; | 
|  | exit_set_pwm_err: | 
|  | mutex_unlock(&ctx->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ctx->pwm_fan_max_state; ++i) | 
|  | if (pwm < ctx->pwm_fan_cooling_levels[i + 1]) | 
|  | break; | 
|  |  | 
|  | ctx->pwm_fan_state = i; | 
|  | } | 
|  |  | 
|  | static ssize_t pwm_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  | unsigned long pwm; | 
|  | int ret; | 
|  |  | 
|  | if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = __set_pwm(ctx, pwm); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | pwm_fan_update_state(ctx, pwm); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", ctx->pwm_value); | 
|  | } | 
|  |  | 
|  | static ssize_t rpm_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", ctx->rpm); | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(fan1_input, rpm, 0); | 
|  |  | 
|  | static struct attribute *pwm_fan_attrs[] = { | 
|  | &sensor_dev_attr_pwm1.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_input.dev_attr.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static umode_t pwm_fan_attrs_visible(struct kobject *kobj, struct attribute *a, | 
|  | int n) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  |  | 
|  | /* Hide fan_input in case no interrupt is available  */ | 
|  | if (n == 1 && ctx->irq <= 0) | 
|  | return 0; | 
|  |  | 
|  | return a->mode; | 
|  | } | 
|  |  | 
|  | static const struct attribute_group pwm_fan_group = { | 
|  | .attrs = pwm_fan_attrs, | 
|  | .is_visible = pwm_fan_attrs_visible, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group *pwm_fan_groups[] = { | 
|  | &pwm_fan_group, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* thermal cooling device callbacks */ | 
|  | static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev, | 
|  | unsigned long *state) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = cdev->devdata; | 
|  |  | 
|  | if (!ctx) | 
|  | return -EINVAL; | 
|  |  | 
|  | *state = ctx->pwm_fan_max_state; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev, | 
|  | unsigned long *state) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = cdev->devdata; | 
|  |  | 
|  | if (!ctx) | 
|  | return -EINVAL; | 
|  |  | 
|  | *state = ctx->pwm_fan_state; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = cdev->devdata; | 
|  | int ret; | 
|  |  | 
|  | if (!ctx || (state > ctx->pwm_fan_max_state)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (state == ctx->pwm_fan_state) | 
|  | return 0; | 
|  |  | 
|  | ret = __set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]); | 
|  | if (ret) { | 
|  | dev_err(&cdev->device, "Cannot set pwm!\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ctx->pwm_fan_state = state; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = { | 
|  | .get_max_state = pwm_fan_get_max_state, | 
|  | .get_cur_state = pwm_fan_get_cur_state, | 
|  | .set_cur_state = pwm_fan_set_cur_state, | 
|  | }; | 
|  |  | 
|  | static int pwm_fan_of_get_cooling_data(struct device *dev, | 
|  | struct pwm_fan_ctx *ctx) | 
|  | { | 
|  | struct device_node *np = dev->of_node; | 
|  | int num, i, ret; | 
|  |  | 
|  | if (!of_find_property(np, "cooling-levels", NULL)) | 
|  | return 0; | 
|  |  | 
|  | ret = of_property_count_u32_elems(np, "cooling-levels"); | 
|  | if (ret <= 0) { | 
|  | dev_err(dev, "Wrong data!\n"); | 
|  | return ret ? : -EINVAL; | 
|  | } | 
|  |  | 
|  | num = ret; | 
|  | ctx->pwm_fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32), | 
|  | GFP_KERNEL); | 
|  | if (!ctx->pwm_fan_cooling_levels) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = of_property_read_u32_array(np, "cooling-levels", | 
|  | ctx->pwm_fan_cooling_levels, num); | 
|  | if (ret) { | 
|  | dev_err(dev, "Property 'cooling-levels' cannot be read!\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num; i++) { | 
|  | if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) { | 
|  | dev_err(dev, "PWM fan state[%d]:%d > %d\n", i, | 
|  | ctx->pwm_fan_cooling_levels[i], MAX_PWM); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | ctx->pwm_fan_max_state = num - 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pwm_fan_regulator_disable(void *data) | 
|  | { | 
|  | regulator_disable(data); | 
|  | } | 
|  |  | 
|  | static void pwm_fan_pwm_disable(void *__ctx) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = __ctx; | 
|  | pwm_disable(ctx->pwm); | 
|  | del_timer_sync(&ctx->rpm_timer); | 
|  | } | 
|  |  | 
|  | static int pwm_fan_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct thermal_cooling_device *cdev; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct pwm_fan_ctx *ctx; | 
|  | struct device *hwmon; | 
|  | int ret; | 
|  | struct pwm_state state = { }; | 
|  | u32 ppr = 2; | 
|  |  | 
|  | ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); | 
|  | if (!ctx) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&ctx->lock); | 
|  |  | 
|  | ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL); | 
|  | if (IS_ERR(ctx->pwm)) { | 
|  | ret = PTR_ERR(ctx->pwm); | 
|  |  | 
|  | if (ret != -EPROBE_DEFER) | 
|  | dev_err(dev, "Could not get PWM: %d\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, ctx); | 
|  |  | 
|  | ctx->irq = platform_get_irq_optional(pdev, 0); | 
|  | if (ctx->irq == -EPROBE_DEFER) | 
|  | return ctx->irq; | 
|  |  | 
|  | ctx->reg_en = devm_regulator_get_optional(dev, "fan"); | 
|  | if (IS_ERR(ctx->reg_en)) { | 
|  | if (PTR_ERR(ctx->reg_en) != -ENODEV) | 
|  | return PTR_ERR(ctx->reg_en); | 
|  |  | 
|  | ctx->reg_en = NULL; | 
|  | } else { | 
|  | ret = regulator_enable(ctx->reg_en); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to enable fan supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable, | 
|  | ctx->reg_en); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ctx->pwm_value = MAX_PWM; | 
|  |  | 
|  | /* Set duty cycle to maximum allowed and enable PWM output */ | 
|  | pwm_init_state(ctx->pwm, &state); | 
|  | state.duty_cycle = ctx->pwm->args.period - 1; | 
|  | state.enabled = true; | 
|  |  | 
|  | ret = pwm_apply_state(ctx->pwm, &state); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to configure PWM: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | timer_setup(&ctx->rpm_timer, sample_timer, 0); | 
|  | ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | of_property_read_u32(dev->of_node, "pulses-per-revolution", &ppr); | 
|  | ctx->pulses_per_revolution = ppr; | 
|  | if (!ctx->pulses_per_revolution) { | 
|  | dev_err(dev, "pulses-per-revolution can't be zero.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ctx->irq > 0) { | 
|  | ret = devm_request_irq(dev, ctx->irq, pulse_handler, 0, | 
|  | pdev->name, ctx); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to request interrupt: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | ctx->sample_start = ktime_get(); | 
|  | mod_timer(&ctx->rpm_timer, jiffies + HZ); | 
|  | } | 
|  |  | 
|  | hwmon = devm_hwmon_device_register_with_groups(dev, "pwmfan", | 
|  | ctx, pwm_fan_groups); | 
|  | if (IS_ERR(hwmon)) { | 
|  | dev_err(dev, "Failed to register hwmon device\n"); | 
|  | return PTR_ERR(hwmon); | 
|  | } | 
|  |  | 
|  | ret = pwm_fan_of_get_cooling_data(dev, ctx); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ctx->pwm_fan_state = ctx->pwm_fan_max_state; | 
|  | if (IS_ENABLED(CONFIG_THERMAL)) { | 
|  | cdev = devm_thermal_of_cooling_device_register(dev, | 
|  | dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops); | 
|  | if (IS_ERR(cdev)) { | 
|  | ret = PTR_ERR(cdev); | 
|  | dev_err(dev, | 
|  | "Failed to register pwm-fan as cooling device: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  | ctx->cdev = cdev; | 
|  | thermal_cdev_update(cdev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pwm_fan_disable(struct device *dev) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  | struct pwm_args args; | 
|  | int ret; | 
|  |  | 
|  | pwm_get_args(ctx->pwm, &args); | 
|  |  | 
|  | if (ctx->pwm_value) { | 
|  | ret = pwm_config(ctx->pwm, 0, args.period); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | pwm_disable(ctx->pwm); | 
|  | } | 
|  |  | 
|  | if (ctx->reg_en) { | 
|  | ret = regulator_disable(ctx->reg_en); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to disable fan supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pwm_fan_shutdown(struct platform_device *pdev) | 
|  | { | 
|  | pwm_fan_disable(&pdev->dev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int pwm_fan_suspend(struct device *dev) | 
|  | { | 
|  | return pwm_fan_disable(dev); | 
|  | } | 
|  |  | 
|  | static int pwm_fan_resume(struct device *dev) | 
|  | { | 
|  | struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); | 
|  | struct pwm_args pargs; | 
|  | unsigned long duty; | 
|  | int ret; | 
|  |  | 
|  | if (ctx->reg_en) { | 
|  | ret = regulator_enable(ctx->reg_en); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to enable fan supply: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ctx->pwm_value == 0) | 
|  | return 0; | 
|  |  | 
|  | pwm_get_args(ctx->pwm, &pargs); | 
|  | duty = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1), MAX_PWM); | 
|  | ret = pwm_config(ctx->pwm, duty, pargs.period); | 
|  | if (ret) | 
|  | return ret; | 
|  | return pwm_enable(ctx->pwm); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume); | 
|  |  | 
|  | static const struct of_device_id of_pwm_fan_match[] = { | 
|  | { .compatible = "pwm-fan", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, of_pwm_fan_match); | 
|  |  | 
|  | static struct platform_driver pwm_fan_driver = { | 
|  | .probe		= pwm_fan_probe, | 
|  | .shutdown	= pwm_fan_shutdown, | 
|  | .driver	= { | 
|  | .name		= "pwm-fan", | 
|  | .pm		= &pwm_fan_pm, | 
|  | .of_match_table	= of_pwm_fan_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(pwm_fan_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); | 
|  | MODULE_ALIAS("platform:pwm-fan"); | 
|  | MODULE_DESCRIPTION("PWM FAN driver"); | 
|  | MODULE_LICENSE("GPL"); |