|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | *  linux/fs/pipe.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992, 1999  Linus Torvalds | 
|  | */ | 
|  |  | 
|  | #include <linux/mm.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/log2.h> | 
|  | #include <linux/mount.h> | 
|  | #include <linux/pseudo_fs.h> | 
|  | #include <linux/magic.h> | 
|  | #include <linux/pipe_fs_i.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/audit.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/memcontrol.h> | 
|  | #include <linux/watch_queue.h> | 
|  | #include <linux/sysctl.h> | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  | #include <asm/ioctls.h> | 
|  |  | 
|  | #include "internal.h" | 
|  |  | 
|  | /* | 
|  | * New pipe buffers will be restricted to this size while the user is exceeding | 
|  | * their pipe buffer quota. The general pipe use case needs at least two | 
|  | * buffers: one for data yet to be read, and one for new data. If this is less | 
|  | * than two, then a write to a non-empty pipe may block even if the pipe is not | 
|  | * full. This can occur with GNU make jobserver or similar uses of pipes as | 
|  | * semaphores: multiple processes may be waiting to write tokens back to the | 
|  | * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/. | 
|  | * | 
|  | * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their | 
|  | * own risk, namely: pipe writes to non-full pipes may block until the pipe is | 
|  | * emptied. | 
|  | */ | 
|  | #define PIPE_MIN_DEF_BUFFERS 2 | 
|  |  | 
|  | /* | 
|  | * The max size that a non-root user is allowed to grow the pipe. Can | 
|  | * be set by root in /proc/sys/fs/pipe-max-size | 
|  | */ | 
|  | static unsigned int pipe_max_size = 1048576; | 
|  |  | 
|  | /* Maximum allocatable pages per user. Hard limit is unset by default, soft | 
|  | * matches default values. | 
|  | */ | 
|  | static unsigned long pipe_user_pages_hard; | 
|  | static unsigned long pipe_user_pages_soft = PIPE_DEF_BUFFERS * INR_OPEN_CUR; | 
|  |  | 
|  | /* | 
|  | * We use head and tail indices that aren't masked off, except at the point of | 
|  | * dereference, but rather they're allowed to wrap naturally.  This means there | 
|  | * isn't a dead spot in the buffer, but the ring has to be a power of two and | 
|  | * <= 2^31. | 
|  | * -- David Howells 2019-09-23. | 
|  | * | 
|  | * Reads with count = 0 should always return 0. | 
|  | * -- Julian Bradfield 1999-06-07. | 
|  | * | 
|  | * FIFOs and Pipes now generate SIGIO for both readers and writers. | 
|  | * -- Jeremy Elson <jelson@circlemud.org> 2001-08-16 | 
|  | * | 
|  | * pipe_read & write cleanup | 
|  | * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09 | 
|  | */ | 
|  |  | 
|  | static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass) | 
|  | { | 
|  | if (pipe->files) | 
|  | mutex_lock_nested(&pipe->mutex, subclass); | 
|  | } | 
|  |  | 
|  | void pipe_lock(struct pipe_inode_info *pipe) | 
|  | { | 
|  | /* | 
|  | * pipe_lock() nests non-pipe inode locks (for writing to a file) | 
|  | */ | 
|  | pipe_lock_nested(pipe, I_MUTEX_PARENT); | 
|  | } | 
|  | EXPORT_SYMBOL(pipe_lock); | 
|  |  | 
|  | void pipe_unlock(struct pipe_inode_info *pipe) | 
|  | { | 
|  | if (pipe->files) | 
|  | mutex_unlock(&pipe->mutex); | 
|  | } | 
|  | EXPORT_SYMBOL(pipe_unlock); | 
|  |  | 
|  | static inline void __pipe_lock(struct pipe_inode_info *pipe) | 
|  | { | 
|  | mutex_lock_nested(&pipe->mutex, I_MUTEX_PARENT); | 
|  | } | 
|  |  | 
|  | static inline void __pipe_unlock(struct pipe_inode_info *pipe) | 
|  | { | 
|  | mutex_unlock(&pipe->mutex); | 
|  | } | 
|  |  | 
|  | void pipe_double_lock(struct pipe_inode_info *pipe1, | 
|  | struct pipe_inode_info *pipe2) | 
|  | { | 
|  | BUG_ON(pipe1 == pipe2); | 
|  |  | 
|  | if (pipe1 < pipe2) { | 
|  | pipe_lock_nested(pipe1, I_MUTEX_PARENT); | 
|  | pipe_lock_nested(pipe2, I_MUTEX_CHILD); | 
|  | } else { | 
|  | pipe_lock_nested(pipe2, I_MUTEX_PARENT); | 
|  | pipe_lock_nested(pipe1, I_MUTEX_CHILD); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void anon_pipe_buf_release(struct pipe_inode_info *pipe, | 
|  | struct pipe_buffer *buf) | 
|  | { | 
|  | struct page *page = buf->page; | 
|  |  | 
|  | /* | 
|  | * If nobody else uses this page, and we don't already have a | 
|  | * temporary page, let's keep track of it as a one-deep | 
|  | * allocation cache. (Otherwise just release our reference to it) | 
|  | */ | 
|  | if (page_count(page) == 1 && !pipe->tmp_page) | 
|  | pipe->tmp_page = page; | 
|  | else | 
|  | put_page(page); | 
|  | } | 
|  |  | 
|  | static bool anon_pipe_buf_try_steal(struct pipe_inode_info *pipe, | 
|  | struct pipe_buffer *buf) | 
|  | { | 
|  | struct page *page = buf->page; | 
|  |  | 
|  | if (page_count(page) != 1) | 
|  | return false; | 
|  | memcg_kmem_uncharge_page(page, 0); | 
|  | __SetPageLocked(page); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * generic_pipe_buf_try_steal - attempt to take ownership of a &pipe_buffer | 
|  | * @pipe:	the pipe that the buffer belongs to | 
|  | * @buf:	the buffer to attempt to steal | 
|  | * | 
|  | * Description: | 
|  | *	This function attempts to steal the &struct page attached to | 
|  | *	@buf. If successful, this function returns 0 and returns with | 
|  | *	the page locked. The caller may then reuse the page for whatever | 
|  | *	he wishes; the typical use is insertion into a different file | 
|  | *	page cache. | 
|  | */ | 
|  | bool generic_pipe_buf_try_steal(struct pipe_inode_info *pipe, | 
|  | struct pipe_buffer *buf) | 
|  | { | 
|  | struct page *page = buf->page; | 
|  |  | 
|  | /* | 
|  | * A reference of one is golden, that means that the owner of this | 
|  | * page is the only one holding a reference to it. lock the page | 
|  | * and return OK. | 
|  | */ | 
|  | if (page_count(page) == 1) { | 
|  | lock_page(page); | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(generic_pipe_buf_try_steal); | 
|  |  | 
|  | /** | 
|  | * generic_pipe_buf_get - get a reference to a &struct pipe_buffer | 
|  | * @pipe:	the pipe that the buffer belongs to | 
|  | * @buf:	the buffer to get a reference to | 
|  | * | 
|  | * Description: | 
|  | *	This function grabs an extra reference to @buf. It's used in | 
|  | *	the tee() system call, when we duplicate the buffers in one | 
|  | *	pipe into another. | 
|  | */ | 
|  | bool generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf) | 
|  | { | 
|  | return try_get_page(buf->page); | 
|  | } | 
|  | EXPORT_SYMBOL(generic_pipe_buf_get); | 
|  |  | 
|  | /** | 
|  | * generic_pipe_buf_release - put a reference to a &struct pipe_buffer | 
|  | * @pipe:	the pipe that the buffer belongs to | 
|  | * @buf:	the buffer to put a reference to | 
|  | * | 
|  | * Description: | 
|  | *	This function releases a reference to @buf. | 
|  | */ | 
|  | void generic_pipe_buf_release(struct pipe_inode_info *pipe, | 
|  | struct pipe_buffer *buf) | 
|  | { | 
|  | put_page(buf->page); | 
|  | } | 
|  | EXPORT_SYMBOL(generic_pipe_buf_release); | 
|  |  | 
|  | static const struct pipe_buf_operations anon_pipe_buf_ops = { | 
|  | .release	= anon_pipe_buf_release, | 
|  | .try_steal	= anon_pipe_buf_try_steal, | 
|  | .get		= generic_pipe_buf_get, | 
|  | }; | 
|  |  | 
|  | /* Done while waiting without holding the pipe lock - thus the READ_ONCE() */ | 
|  | static inline bool pipe_readable(const struct pipe_inode_info *pipe) | 
|  | { | 
|  | unsigned int head = READ_ONCE(pipe->head); | 
|  | unsigned int tail = READ_ONCE(pipe->tail); | 
|  | unsigned int writers = READ_ONCE(pipe->writers); | 
|  |  | 
|  | return !pipe_empty(head, tail) || !writers; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | pipe_read(struct kiocb *iocb, struct iov_iter *to) | 
|  | { | 
|  | size_t total_len = iov_iter_count(to); | 
|  | struct file *filp = iocb->ki_filp; | 
|  | struct pipe_inode_info *pipe = filp->private_data; | 
|  | bool was_full, wake_next_reader = false; | 
|  | ssize_t ret; | 
|  |  | 
|  | /* Null read succeeds. */ | 
|  | if (unlikely(total_len == 0)) | 
|  | return 0; | 
|  |  | 
|  | ret = 0; | 
|  | __pipe_lock(pipe); | 
|  |  | 
|  | /* | 
|  | * We only wake up writers if the pipe was full when we started | 
|  | * reading in order to avoid unnecessary wakeups. | 
|  | * | 
|  | * But when we do wake up writers, we do so using a sync wakeup | 
|  | * (WF_SYNC), because we want them to get going and generate more | 
|  | * data for us. | 
|  | */ | 
|  | was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage); | 
|  | for (;;) { | 
|  | /* Read ->head with a barrier vs post_one_notification() */ | 
|  | unsigned int head = smp_load_acquire(&pipe->head); | 
|  | unsigned int tail = pipe->tail; | 
|  | unsigned int mask = pipe->ring_size - 1; | 
|  |  | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (pipe->note_loss) { | 
|  | struct watch_notification n; | 
|  |  | 
|  | if (total_len < 8) { | 
|  | if (ret == 0) | 
|  | ret = -ENOBUFS; | 
|  | break; | 
|  | } | 
|  |  | 
|  | n.type = WATCH_TYPE_META; | 
|  | n.subtype = WATCH_META_LOSS_NOTIFICATION; | 
|  | n.info = watch_sizeof(n); | 
|  | if (copy_to_iter(&n, sizeof(n), to) != sizeof(n)) { | 
|  | if (ret == 0) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  | } | 
|  | ret += sizeof(n); | 
|  | total_len -= sizeof(n); | 
|  | pipe->note_loss = false; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (!pipe_empty(head, tail)) { | 
|  | struct pipe_buffer *buf = &pipe->bufs[tail & mask]; | 
|  | size_t chars = buf->len; | 
|  | size_t written; | 
|  | int error; | 
|  |  | 
|  | if (chars > total_len) { | 
|  | if (buf->flags & PIPE_BUF_FLAG_WHOLE) { | 
|  | if (ret == 0) | 
|  | ret = -ENOBUFS; | 
|  | break; | 
|  | } | 
|  | chars = total_len; | 
|  | } | 
|  |  | 
|  | error = pipe_buf_confirm(pipe, buf); | 
|  | if (error) { | 
|  | if (!ret) | 
|  | ret = error; | 
|  | break; | 
|  | } | 
|  |  | 
|  | written = copy_page_to_iter(buf->page, buf->offset, chars, to); | 
|  | if (unlikely(written < chars)) { | 
|  | if (!ret) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  | } | 
|  | ret += chars; | 
|  | buf->offset += chars; | 
|  | buf->len -= chars; | 
|  |  | 
|  | /* Was it a packet buffer? Clean up and exit */ | 
|  | if (buf->flags & PIPE_BUF_FLAG_PACKET) { | 
|  | total_len = chars; | 
|  | buf->len = 0; | 
|  | } | 
|  |  | 
|  | if (!buf->len) { | 
|  | pipe_buf_release(pipe, buf); | 
|  | spin_lock_irq(&pipe->rd_wait.lock); | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (buf->flags & PIPE_BUF_FLAG_LOSS) | 
|  | pipe->note_loss = true; | 
|  | #endif | 
|  | tail++; | 
|  | pipe->tail = tail; | 
|  | spin_unlock_irq(&pipe->rd_wait.lock); | 
|  | } | 
|  | total_len -= chars; | 
|  | if (!total_len) | 
|  | break;	/* common path: read succeeded */ | 
|  | if (!pipe_empty(head, tail))	/* More to do? */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!pipe->writers) | 
|  | break; | 
|  | if (ret) | 
|  | break; | 
|  | if ((filp->f_flags & O_NONBLOCK) || | 
|  | (iocb->ki_flags & IOCB_NOWAIT)) { | 
|  | ret = -EAGAIN; | 
|  | break; | 
|  | } | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | /* | 
|  | * We only get here if we didn't actually read anything. | 
|  | * | 
|  | * However, we could have seen (and removed) a zero-sized | 
|  | * pipe buffer, and might have made space in the buffers | 
|  | * that way. | 
|  | * | 
|  | * You can't make zero-sized pipe buffers by doing an empty | 
|  | * write (not even in packet mode), but they can happen if | 
|  | * the writer gets an EFAULT when trying to fill a buffer | 
|  | * that already got allocated and inserted in the buffer | 
|  | * array. | 
|  | * | 
|  | * So we still need to wake up any pending writers in the | 
|  | * _very_ unlikely case that the pipe was full, but we got | 
|  | * no data. | 
|  | */ | 
|  | if (unlikely(was_full)) | 
|  | wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM); | 
|  | kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); | 
|  |  | 
|  | /* | 
|  | * But because we didn't read anything, at this point we can | 
|  | * just return directly with -ERESTARTSYS if we're interrupted, | 
|  | * since we've done any required wakeups and there's no need | 
|  | * to mark anything accessed. And we've dropped the lock. | 
|  | */ | 
|  | if (wait_event_interruptible_exclusive(pipe->rd_wait, pipe_readable(pipe)) < 0) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  | was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage); | 
|  | wake_next_reader = true; | 
|  | } | 
|  | if (pipe_empty(pipe->head, pipe->tail)) | 
|  | wake_next_reader = false; | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | if (was_full) | 
|  | wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM); | 
|  | if (wake_next_reader) | 
|  | wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM); | 
|  | kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); | 
|  | if (ret > 0) | 
|  | file_accessed(filp); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int is_packetized(struct file *file) | 
|  | { | 
|  | return (file->f_flags & O_DIRECT) != 0; | 
|  | } | 
|  |  | 
|  | /* Done while waiting without holding the pipe lock - thus the READ_ONCE() */ | 
|  | static inline bool pipe_writable(const struct pipe_inode_info *pipe) | 
|  | { | 
|  | unsigned int head = READ_ONCE(pipe->head); | 
|  | unsigned int tail = READ_ONCE(pipe->tail); | 
|  | unsigned int max_usage = READ_ONCE(pipe->max_usage); | 
|  |  | 
|  | return !pipe_full(head, tail, max_usage) || | 
|  | !READ_ONCE(pipe->readers); | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | pipe_write(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | struct file *filp = iocb->ki_filp; | 
|  | struct pipe_inode_info *pipe = filp->private_data; | 
|  | unsigned int head; | 
|  | ssize_t ret = 0; | 
|  | size_t total_len = iov_iter_count(from); | 
|  | ssize_t chars; | 
|  | bool was_empty = false; | 
|  | bool wake_next_writer = false; | 
|  |  | 
|  | /* Null write succeeds. */ | 
|  | if (unlikely(total_len == 0)) | 
|  | return 0; | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  |  | 
|  | if (!pipe->readers) { | 
|  | send_sig(SIGPIPE, current, 0); | 
|  | ret = -EPIPE; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (pipe->watch_queue) { | 
|  | ret = -EXDEV; | 
|  | goto out; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * If it wasn't empty we try to merge new data into | 
|  | * the last buffer. | 
|  | * | 
|  | * That naturally merges small writes, but it also | 
|  | * page-aligns the rest of the writes for large writes | 
|  | * spanning multiple pages. | 
|  | */ | 
|  | head = pipe->head; | 
|  | was_empty = pipe_empty(head, pipe->tail); | 
|  | chars = total_len & (PAGE_SIZE-1); | 
|  | if (chars && !was_empty) { | 
|  | unsigned int mask = pipe->ring_size - 1; | 
|  | struct pipe_buffer *buf = &pipe->bufs[(head - 1) & mask]; | 
|  | int offset = buf->offset + buf->len; | 
|  |  | 
|  | if ((buf->flags & PIPE_BUF_FLAG_CAN_MERGE) && | 
|  | offset + chars <= PAGE_SIZE) { | 
|  | ret = pipe_buf_confirm(pipe, buf); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ret = copy_page_from_iter(buf->page, offset, chars, from); | 
|  | if (unlikely(ret < chars)) { | 
|  | ret = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | buf->len += ret; | 
|  | if (!iov_iter_count(from)) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | if (!pipe->readers) { | 
|  | send_sig(SIGPIPE, current, 0); | 
|  | if (!ret) | 
|  | ret = -EPIPE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | head = pipe->head; | 
|  | if (!pipe_full(head, pipe->tail, pipe->max_usage)) { | 
|  | unsigned int mask = pipe->ring_size - 1; | 
|  | struct pipe_buffer *buf = &pipe->bufs[head & mask]; | 
|  | struct page *page = pipe->tmp_page; | 
|  | int copied; | 
|  |  | 
|  | if (!page) { | 
|  | page = alloc_page(GFP_HIGHUSER | __GFP_ACCOUNT); | 
|  | if (unlikely(!page)) { | 
|  | ret = ret ? : -ENOMEM; | 
|  | break; | 
|  | } | 
|  | pipe->tmp_page = page; | 
|  | } | 
|  |  | 
|  | /* Allocate a slot in the ring in advance and attach an | 
|  | * empty buffer.  If we fault or otherwise fail to use | 
|  | * it, either the reader will consume it or it'll still | 
|  | * be there for the next write. | 
|  | */ | 
|  | spin_lock_irq(&pipe->rd_wait.lock); | 
|  |  | 
|  | head = pipe->head; | 
|  | if (pipe_full(head, pipe->tail, pipe->max_usage)) { | 
|  | spin_unlock_irq(&pipe->rd_wait.lock); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | pipe->head = head + 1; | 
|  | spin_unlock_irq(&pipe->rd_wait.lock); | 
|  |  | 
|  | /* Insert it into the buffer array */ | 
|  | buf = &pipe->bufs[head & mask]; | 
|  | buf->page = page; | 
|  | buf->ops = &anon_pipe_buf_ops; | 
|  | buf->offset = 0; | 
|  | buf->len = 0; | 
|  | if (is_packetized(filp)) | 
|  | buf->flags = PIPE_BUF_FLAG_PACKET; | 
|  | else | 
|  | buf->flags = PIPE_BUF_FLAG_CAN_MERGE; | 
|  | pipe->tmp_page = NULL; | 
|  |  | 
|  | copied = copy_page_from_iter(page, 0, PAGE_SIZE, from); | 
|  | if (unlikely(copied < PAGE_SIZE && iov_iter_count(from))) { | 
|  | if (!ret) | 
|  | ret = -EFAULT; | 
|  | break; | 
|  | } | 
|  | ret += copied; | 
|  | buf->offset = 0; | 
|  | buf->len = copied; | 
|  |  | 
|  | if (!iov_iter_count(from)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!pipe_full(head, pipe->tail, pipe->max_usage)) | 
|  | continue; | 
|  |  | 
|  | /* Wait for buffer space to become available. */ | 
|  | if ((filp->f_flags & O_NONBLOCK) || | 
|  | (iocb->ki_flags & IOCB_NOWAIT)) { | 
|  | if (!ret) | 
|  | ret = -EAGAIN; | 
|  | break; | 
|  | } | 
|  | if (signal_pending(current)) { | 
|  | if (!ret) | 
|  | ret = -ERESTARTSYS; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We're going to release the pipe lock and wait for more | 
|  | * space. We wake up any readers if necessary, and then | 
|  | * after waiting we need to re-check whether the pipe | 
|  | * become empty while we dropped the lock. | 
|  | */ | 
|  | __pipe_unlock(pipe); | 
|  | if (was_empty) | 
|  | wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM); | 
|  | kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); | 
|  | wait_event_interruptible_exclusive(pipe->wr_wait, pipe_writable(pipe)); | 
|  | __pipe_lock(pipe); | 
|  | was_empty = pipe_empty(pipe->head, pipe->tail); | 
|  | wake_next_writer = true; | 
|  | } | 
|  | out: | 
|  | if (pipe_full(pipe->head, pipe->tail, pipe->max_usage)) | 
|  | wake_next_writer = false; | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | /* | 
|  | * If we do do a wakeup event, we do a 'sync' wakeup, because we | 
|  | * want the reader to start processing things asap, rather than | 
|  | * leave the data pending. | 
|  | * | 
|  | * This is particularly important for small writes, because of | 
|  | * how (for example) the GNU make jobserver uses small writes to | 
|  | * wake up pending jobs | 
|  | * | 
|  | * Epoll nonsensically wants a wakeup whether the pipe | 
|  | * was already empty or not. | 
|  | */ | 
|  | if (was_empty || pipe->poll_usage) | 
|  | wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM); | 
|  | kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); | 
|  | if (wake_next_writer) | 
|  | wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM); | 
|  | if (ret > 0 && sb_start_write_trylock(file_inode(filp)->i_sb)) { | 
|  | int err = file_update_time(filp); | 
|  | if (err) | 
|  | ret = err; | 
|  | sb_end_write(file_inode(filp)->i_sb); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct pipe_inode_info *pipe = filp->private_data; | 
|  | unsigned int count, head, tail, mask; | 
|  |  | 
|  | switch (cmd) { | 
|  | case FIONREAD: | 
|  | __pipe_lock(pipe); | 
|  | count = 0; | 
|  | head = pipe->head; | 
|  | tail = pipe->tail; | 
|  | mask = pipe->ring_size - 1; | 
|  |  | 
|  | while (tail != head) { | 
|  | count += pipe->bufs[tail & mask].len; | 
|  | tail++; | 
|  | } | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | return put_user(count, (int __user *)arg); | 
|  |  | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | case IOC_WATCH_QUEUE_SET_SIZE: { | 
|  | int ret; | 
|  | __pipe_lock(pipe); | 
|  | ret = watch_queue_set_size(pipe, arg); | 
|  | __pipe_unlock(pipe); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | case IOC_WATCH_QUEUE_SET_FILTER: | 
|  | return watch_queue_set_filter( | 
|  | pipe, (struct watch_notification_filter __user *)arg); | 
|  | #endif | 
|  |  | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* No kernel lock held - fine */ | 
|  | static __poll_t | 
|  | pipe_poll(struct file *filp, poll_table *wait) | 
|  | { | 
|  | __poll_t mask; | 
|  | struct pipe_inode_info *pipe = filp->private_data; | 
|  | unsigned int head, tail; | 
|  |  | 
|  | /* Epoll has some historical nasty semantics, this enables them */ | 
|  | WRITE_ONCE(pipe->poll_usage, true); | 
|  |  | 
|  | /* | 
|  | * Reading pipe state only -- no need for acquiring the semaphore. | 
|  | * | 
|  | * But because this is racy, the code has to add the | 
|  | * entry to the poll table _first_ .. | 
|  | */ | 
|  | if (filp->f_mode & FMODE_READ) | 
|  | poll_wait(filp, &pipe->rd_wait, wait); | 
|  | if (filp->f_mode & FMODE_WRITE) | 
|  | poll_wait(filp, &pipe->wr_wait, wait); | 
|  |  | 
|  | /* | 
|  | * .. and only then can you do the racy tests. That way, | 
|  | * if something changes and you got it wrong, the poll | 
|  | * table entry will wake you up and fix it. | 
|  | */ | 
|  | head = READ_ONCE(pipe->head); | 
|  | tail = READ_ONCE(pipe->tail); | 
|  |  | 
|  | mask = 0; | 
|  | if (filp->f_mode & FMODE_READ) { | 
|  | if (!pipe_empty(head, tail)) | 
|  | mask |= EPOLLIN | EPOLLRDNORM; | 
|  | if (!pipe->writers && filp->f_version != pipe->w_counter) | 
|  | mask |= EPOLLHUP; | 
|  | } | 
|  |  | 
|  | if (filp->f_mode & FMODE_WRITE) { | 
|  | if (!pipe_full(head, tail, pipe->max_usage)) | 
|  | mask |= EPOLLOUT | EPOLLWRNORM; | 
|  | /* | 
|  | * Most Unices do not set EPOLLERR for FIFOs but on Linux they | 
|  | * behave exactly like pipes for poll(). | 
|  | */ | 
|  | if (!pipe->readers) | 
|  | mask |= EPOLLERR; | 
|  | } | 
|  |  | 
|  | return mask; | 
|  | } | 
|  |  | 
|  | static void put_pipe_info(struct inode *inode, struct pipe_inode_info *pipe) | 
|  | { | 
|  | int kill = 0; | 
|  |  | 
|  | spin_lock(&inode->i_lock); | 
|  | if (!--pipe->files) { | 
|  | inode->i_pipe = NULL; | 
|  | kill = 1; | 
|  | } | 
|  | spin_unlock(&inode->i_lock); | 
|  |  | 
|  | if (kill) | 
|  | free_pipe_info(pipe); | 
|  | } | 
|  |  | 
|  | static int | 
|  | pipe_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct pipe_inode_info *pipe = file->private_data; | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  | if (file->f_mode & FMODE_READ) | 
|  | pipe->readers--; | 
|  | if (file->f_mode & FMODE_WRITE) | 
|  | pipe->writers--; | 
|  |  | 
|  | /* Was that the last reader or writer, but not the other side? */ | 
|  | if (!pipe->readers != !pipe->writers) { | 
|  | wake_up_interruptible_all(&pipe->rd_wait); | 
|  | wake_up_interruptible_all(&pipe->wr_wait); | 
|  | kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); | 
|  | kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); | 
|  | } | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | put_pipe_info(inode, pipe); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | pipe_fasync(int fd, struct file *filp, int on) | 
|  | { | 
|  | struct pipe_inode_info *pipe = filp->private_data; | 
|  | int retval = 0; | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  | if (filp->f_mode & FMODE_READ) | 
|  | retval = fasync_helper(fd, filp, on, &pipe->fasync_readers); | 
|  | if ((filp->f_mode & FMODE_WRITE) && retval >= 0) { | 
|  | retval = fasync_helper(fd, filp, on, &pipe->fasync_writers); | 
|  | if (retval < 0 && (filp->f_mode & FMODE_READ)) | 
|  | /* this can happen only if on == T */ | 
|  | fasync_helper(-1, filp, 0, &pipe->fasync_readers); | 
|  | } | 
|  | __pipe_unlock(pipe); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | unsigned long account_pipe_buffers(struct user_struct *user, | 
|  | unsigned long old, unsigned long new) | 
|  | { | 
|  | return atomic_long_add_return(new - old, &user->pipe_bufs); | 
|  | } | 
|  |  | 
|  | bool too_many_pipe_buffers_soft(unsigned long user_bufs) | 
|  | { | 
|  | unsigned long soft_limit = READ_ONCE(pipe_user_pages_soft); | 
|  |  | 
|  | return soft_limit && user_bufs > soft_limit; | 
|  | } | 
|  |  | 
|  | bool too_many_pipe_buffers_hard(unsigned long user_bufs) | 
|  | { | 
|  | unsigned long hard_limit = READ_ONCE(pipe_user_pages_hard); | 
|  |  | 
|  | return hard_limit && user_bufs > hard_limit; | 
|  | } | 
|  |  | 
|  | bool pipe_is_unprivileged_user(void) | 
|  | { | 
|  | return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN); | 
|  | } | 
|  |  | 
|  | struct pipe_inode_info *alloc_pipe_info(void) | 
|  | { | 
|  | struct pipe_inode_info *pipe; | 
|  | unsigned long pipe_bufs = PIPE_DEF_BUFFERS; | 
|  | struct user_struct *user = get_current_user(); | 
|  | unsigned long user_bufs; | 
|  | unsigned int max_size = READ_ONCE(pipe_max_size); | 
|  |  | 
|  | pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL_ACCOUNT); | 
|  | if (pipe == NULL) | 
|  | goto out_free_uid; | 
|  |  | 
|  | if (pipe_bufs * PAGE_SIZE > max_size && !capable(CAP_SYS_RESOURCE)) | 
|  | pipe_bufs = max_size >> PAGE_SHIFT; | 
|  |  | 
|  | user_bufs = account_pipe_buffers(user, 0, pipe_bufs); | 
|  |  | 
|  | if (too_many_pipe_buffers_soft(user_bufs) && pipe_is_unprivileged_user()) { | 
|  | user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS); | 
|  | pipe_bufs = PIPE_MIN_DEF_BUFFERS; | 
|  | } | 
|  |  | 
|  | if (too_many_pipe_buffers_hard(user_bufs) && pipe_is_unprivileged_user()) | 
|  | goto out_revert_acct; | 
|  |  | 
|  | pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer), | 
|  | GFP_KERNEL_ACCOUNT); | 
|  |  | 
|  | if (pipe->bufs) { | 
|  | init_waitqueue_head(&pipe->rd_wait); | 
|  | init_waitqueue_head(&pipe->wr_wait); | 
|  | pipe->r_counter = pipe->w_counter = 1; | 
|  | pipe->max_usage = pipe_bufs; | 
|  | pipe->ring_size = pipe_bufs; | 
|  | pipe->nr_accounted = pipe_bufs; | 
|  | pipe->user = user; | 
|  | mutex_init(&pipe->mutex); | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | out_revert_acct: | 
|  | (void) account_pipe_buffers(user, pipe_bufs, 0); | 
|  | kfree(pipe); | 
|  | out_free_uid: | 
|  | free_uid(user); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void free_pipe_info(struct pipe_inode_info *pipe) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (pipe->watch_queue) | 
|  | watch_queue_clear(pipe->watch_queue); | 
|  | #endif | 
|  |  | 
|  | (void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0); | 
|  | free_uid(pipe->user); | 
|  | for (i = 0; i < pipe->ring_size; i++) { | 
|  | struct pipe_buffer *buf = pipe->bufs + i; | 
|  | if (buf->ops) | 
|  | pipe_buf_release(pipe, buf); | 
|  | } | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (pipe->watch_queue) | 
|  | put_watch_queue(pipe->watch_queue); | 
|  | #endif | 
|  | if (pipe->tmp_page) | 
|  | __free_page(pipe->tmp_page); | 
|  | kfree(pipe->bufs); | 
|  | kfree(pipe); | 
|  | } | 
|  |  | 
|  | static struct vfsmount *pipe_mnt __read_mostly; | 
|  |  | 
|  | /* | 
|  | * pipefs_dname() is called from d_path(). | 
|  | */ | 
|  | static char *pipefs_dname(struct dentry *dentry, char *buffer, int buflen) | 
|  | { | 
|  | return dynamic_dname(buffer, buflen, "pipe:[%lu]", | 
|  | d_inode(dentry)->i_ino); | 
|  | } | 
|  |  | 
|  | static const struct dentry_operations pipefs_dentry_operations = { | 
|  | .d_dname	= pipefs_dname, | 
|  | }; | 
|  |  | 
|  | static struct inode * get_pipe_inode(void) | 
|  | { | 
|  | struct inode *inode = new_inode_pseudo(pipe_mnt->mnt_sb); | 
|  | struct pipe_inode_info *pipe; | 
|  |  | 
|  | if (!inode) | 
|  | goto fail_inode; | 
|  |  | 
|  | inode->i_ino = get_next_ino(); | 
|  |  | 
|  | pipe = alloc_pipe_info(); | 
|  | if (!pipe) | 
|  | goto fail_iput; | 
|  |  | 
|  | inode->i_pipe = pipe; | 
|  | pipe->files = 2; | 
|  | pipe->readers = pipe->writers = 1; | 
|  | inode->i_fop = &pipefifo_fops; | 
|  |  | 
|  | /* | 
|  | * Mark the inode dirty from the very beginning, | 
|  | * that way it will never be moved to the dirty | 
|  | * list because "mark_inode_dirty()" will think | 
|  | * that it already _is_ on the dirty list. | 
|  | */ | 
|  | inode->i_state = I_DIRTY; | 
|  | inode->i_mode = S_IFIFO | S_IRUSR | S_IWUSR; | 
|  | inode->i_uid = current_fsuid(); | 
|  | inode->i_gid = current_fsgid(); | 
|  | inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode); | 
|  |  | 
|  | return inode; | 
|  |  | 
|  | fail_iput: | 
|  | iput(inode); | 
|  |  | 
|  | fail_inode: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int create_pipe_files(struct file **res, int flags) | 
|  | { | 
|  | struct inode *inode = get_pipe_inode(); | 
|  | struct file *f; | 
|  | int error; | 
|  |  | 
|  | if (!inode) | 
|  | return -ENFILE; | 
|  |  | 
|  | if (flags & O_NOTIFICATION_PIPE) { | 
|  | error = watch_queue_init(inode->i_pipe); | 
|  | if (error) { | 
|  | free_pipe_info(inode->i_pipe); | 
|  | iput(inode); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | f = alloc_file_pseudo(inode, pipe_mnt, "", | 
|  | O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)), | 
|  | &pipefifo_fops); | 
|  | if (IS_ERR(f)) { | 
|  | free_pipe_info(inode->i_pipe); | 
|  | iput(inode); | 
|  | return PTR_ERR(f); | 
|  | } | 
|  |  | 
|  | f->private_data = inode->i_pipe; | 
|  |  | 
|  | res[0] = alloc_file_clone(f, O_RDONLY | (flags & O_NONBLOCK), | 
|  | &pipefifo_fops); | 
|  | if (IS_ERR(res[0])) { | 
|  | put_pipe_info(inode, inode->i_pipe); | 
|  | fput(f); | 
|  | return PTR_ERR(res[0]); | 
|  | } | 
|  | res[0]->private_data = inode->i_pipe; | 
|  | res[1] = f; | 
|  | stream_open(inode, res[0]); | 
|  | stream_open(inode, res[1]); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __do_pipe_flags(int *fd, struct file **files, int flags) | 
|  | { | 
|  | int error; | 
|  | int fdw, fdr; | 
|  |  | 
|  | if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT | O_NOTIFICATION_PIPE)) | 
|  | return -EINVAL; | 
|  |  | 
|  | error = create_pipe_files(files, flags); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | error = get_unused_fd_flags(flags); | 
|  | if (error < 0) | 
|  | goto err_read_pipe; | 
|  | fdr = error; | 
|  |  | 
|  | error = get_unused_fd_flags(flags); | 
|  | if (error < 0) | 
|  | goto err_fdr; | 
|  | fdw = error; | 
|  |  | 
|  | audit_fd_pair(fdr, fdw); | 
|  | fd[0] = fdr; | 
|  | fd[1] = fdw; | 
|  | /* pipe groks IOCB_NOWAIT */ | 
|  | files[0]->f_mode |= FMODE_NOWAIT; | 
|  | files[1]->f_mode |= FMODE_NOWAIT; | 
|  | return 0; | 
|  |  | 
|  | err_fdr: | 
|  | put_unused_fd(fdr); | 
|  | err_read_pipe: | 
|  | fput(files[0]); | 
|  | fput(files[1]); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | int do_pipe_flags(int *fd, int flags) | 
|  | { | 
|  | struct file *files[2]; | 
|  | int error = __do_pipe_flags(fd, files, flags); | 
|  | if (!error) { | 
|  | fd_install(fd[0], files[0]); | 
|  | fd_install(fd[1], files[1]); | 
|  | } | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * sys_pipe() is the normal C calling standard for creating | 
|  | * a pipe. It's not the way Unix traditionally does this, though. | 
|  | */ | 
|  | static int do_pipe2(int __user *fildes, int flags) | 
|  | { | 
|  | struct file *files[2]; | 
|  | int fd[2]; | 
|  | int error; | 
|  |  | 
|  | error = __do_pipe_flags(fd, files, flags); | 
|  | if (!error) { | 
|  | if (unlikely(copy_to_user(fildes, fd, sizeof(fd)))) { | 
|  | fput(files[0]); | 
|  | fput(files[1]); | 
|  | put_unused_fd(fd[0]); | 
|  | put_unused_fd(fd[1]); | 
|  | error = -EFAULT; | 
|  | } else { | 
|  | fd_install(fd[0], files[0]); | 
|  | fd_install(fd[1], files[1]); | 
|  | } | 
|  | } | 
|  | return error; | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags) | 
|  | { | 
|  | return do_pipe2(fildes, flags); | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE1(pipe, int __user *, fildes) | 
|  | { | 
|  | return do_pipe2(fildes, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the stupid "wait for pipe to be readable or writable" | 
|  | * model. | 
|  | * | 
|  | * See pipe_read/write() for the proper kind of exclusive wait, | 
|  | * but that requires that we wake up any other readers/writers | 
|  | * if we then do not end up reading everything (ie the whole | 
|  | * "wake_next_reader/writer" logic in pipe_read/write()). | 
|  | */ | 
|  | void pipe_wait_readable(struct pipe_inode_info *pipe) | 
|  | { | 
|  | pipe_unlock(pipe); | 
|  | wait_event_interruptible(pipe->rd_wait, pipe_readable(pipe)); | 
|  | pipe_lock(pipe); | 
|  | } | 
|  |  | 
|  | void pipe_wait_writable(struct pipe_inode_info *pipe) | 
|  | { | 
|  | pipe_unlock(pipe); | 
|  | wait_event_interruptible(pipe->wr_wait, pipe_writable(pipe)); | 
|  | pipe_lock(pipe); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This depends on both the wait (here) and the wakeup (wake_up_partner) | 
|  | * holding the pipe lock, so "*cnt" is stable and we know a wakeup cannot | 
|  | * race with the count check and waitqueue prep. | 
|  | * | 
|  | * Normally in order to avoid races, you'd do the prepare_to_wait() first, | 
|  | * then check the condition you're waiting for, and only then sleep. But | 
|  | * because of the pipe lock, we can check the condition before being on | 
|  | * the wait queue. | 
|  | * | 
|  | * We use the 'rd_wait' waitqueue for pipe partner waiting. | 
|  | */ | 
|  | static int wait_for_partner(struct pipe_inode_info *pipe, unsigned int *cnt) | 
|  | { | 
|  | DEFINE_WAIT(rdwait); | 
|  | int cur = *cnt; | 
|  |  | 
|  | while (cur == *cnt) { | 
|  | prepare_to_wait(&pipe->rd_wait, &rdwait, TASK_INTERRUPTIBLE); | 
|  | pipe_unlock(pipe); | 
|  | schedule(); | 
|  | finish_wait(&pipe->rd_wait, &rdwait); | 
|  | pipe_lock(pipe); | 
|  | if (signal_pending(current)) | 
|  | break; | 
|  | } | 
|  | return cur == *cnt ? -ERESTARTSYS : 0; | 
|  | } | 
|  |  | 
|  | static void wake_up_partner(struct pipe_inode_info *pipe) | 
|  | { | 
|  | wake_up_interruptible_all(&pipe->rd_wait); | 
|  | } | 
|  |  | 
|  | static int fifo_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct pipe_inode_info *pipe; | 
|  | bool is_pipe = inode->i_sb->s_magic == PIPEFS_MAGIC; | 
|  | int ret; | 
|  |  | 
|  | filp->f_version = 0; | 
|  |  | 
|  | spin_lock(&inode->i_lock); | 
|  | if (inode->i_pipe) { | 
|  | pipe = inode->i_pipe; | 
|  | pipe->files++; | 
|  | spin_unlock(&inode->i_lock); | 
|  | } else { | 
|  | spin_unlock(&inode->i_lock); | 
|  | pipe = alloc_pipe_info(); | 
|  | if (!pipe) | 
|  | return -ENOMEM; | 
|  | pipe->files = 1; | 
|  | spin_lock(&inode->i_lock); | 
|  | if (unlikely(inode->i_pipe)) { | 
|  | inode->i_pipe->files++; | 
|  | spin_unlock(&inode->i_lock); | 
|  | free_pipe_info(pipe); | 
|  | pipe = inode->i_pipe; | 
|  | } else { | 
|  | inode->i_pipe = pipe; | 
|  | spin_unlock(&inode->i_lock); | 
|  | } | 
|  | } | 
|  | filp->private_data = pipe; | 
|  | /* OK, we have a pipe and it's pinned down */ | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  |  | 
|  | /* We can only do regular read/write on fifos */ | 
|  | stream_open(inode, filp); | 
|  |  | 
|  | switch (filp->f_mode & (FMODE_READ | FMODE_WRITE)) { | 
|  | case FMODE_READ: | 
|  | /* | 
|  | *  O_RDONLY | 
|  | *  POSIX.1 says that O_NONBLOCK means return with the FIFO | 
|  | *  opened, even when there is no process writing the FIFO. | 
|  | */ | 
|  | pipe->r_counter++; | 
|  | if (pipe->readers++ == 0) | 
|  | wake_up_partner(pipe); | 
|  |  | 
|  | if (!is_pipe && !pipe->writers) { | 
|  | if ((filp->f_flags & O_NONBLOCK)) { | 
|  | /* suppress EPOLLHUP until we have | 
|  | * seen a writer */ | 
|  | filp->f_version = pipe->w_counter; | 
|  | } else { | 
|  | if (wait_for_partner(pipe, &pipe->w_counter)) | 
|  | goto err_rd; | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FMODE_WRITE: | 
|  | /* | 
|  | *  O_WRONLY | 
|  | *  POSIX.1 says that O_NONBLOCK means return -1 with | 
|  | *  errno=ENXIO when there is no process reading the FIFO. | 
|  | */ | 
|  | ret = -ENXIO; | 
|  | if (!is_pipe && (filp->f_flags & O_NONBLOCK) && !pipe->readers) | 
|  | goto err; | 
|  |  | 
|  | pipe->w_counter++; | 
|  | if (!pipe->writers++) | 
|  | wake_up_partner(pipe); | 
|  |  | 
|  | if (!is_pipe && !pipe->readers) { | 
|  | if (wait_for_partner(pipe, &pipe->r_counter)) | 
|  | goto err_wr; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FMODE_READ | FMODE_WRITE: | 
|  | /* | 
|  | *  O_RDWR | 
|  | *  POSIX.1 leaves this case "undefined" when O_NONBLOCK is set. | 
|  | *  This implementation will NEVER block on a O_RDWR open, since | 
|  | *  the process can at least talk to itself. | 
|  | */ | 
|  |  | 
|  | pipe->readers++; | 
|  | pipe->writers++; | 
|  | pipe->r_counter++; | 
|  | pipe->w_counter++; | 
|  | if (pipe->readers == 1 || pipe->writers == 1) | 
|  | wake_up_partner(pipe); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* Ok! */ | 
|  | __pipe_unlock(pipe); | 
|  | return 0; | 
|  |  | 
|  | err_rd: | 
|  | if (!--pipe->readers) | 
|  | wake_up_interruptible(&pipe->wr_wait); | 
|  | ret = -ERESTARTSYS; | 
|  | goto err; | 
|  |  | 
|  | err_wr: | 
|  | if (!--pipe->writers) | 
|  | wake_up_interruptible_all(&pipe->rd_wait); | 
|  | ret = -ERESTARTSYS; | 
|  | goto err; | 
|  |  | 
|  | err: | 
|  | __pipe_unlock(pipe); | 
|  |  | 
|  | put_pipe_info(inode, pipe); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct file_operations pipefifo_fops = { | 
|  | .open		= fifo_open, | 
|  | .llseek		= no_llseek, | 
|  | .read_iter	= pipe_read, | 
|  | .write_iter	= pipe_write, | 
|  | .poll		= pipe_poll, | 
|  | .unlocked_ioctl	= pipe_ioctl, | 
|  | .release	= pipe_release, | 
|  | .fasync		= pipe_fasync, | 
|  | .splice_write	= iter_file_splice_write, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Currently we rely on the pipe array holding a power-of-2 number | 
|  | * of pages. Returns 0 on error. | 
|  | */ | 
|  | unsigned int round_pipe_size(unsigned long size) | 
|  | { | 
|  | if (size > (1U << 31)) | 
|  | return 0; | 
|  |  | 
|  | /* Minimum pipe size, as required by POSIX */ | 
|  | if (size < PAGE_SIZE) | 
|  | return PAGE_SIZE; | 
|  |  | 
|  | return roundup_pow_of_two(size); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Resize the pipe ring to a number of slots. | 
|  | * | 
|  | * Note the pipe can be reduced in capacity, but only if the current | 
|  | * occupancy doesn't exceed nr_slots; if it does, EBUSY will be | 
|  | * returned instead. | 
|  | */ | 
|  | int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots) | 
|  | { | 
|  | struct pipe_buffer *bufs; | 
|  | unsigned int head, tail, mask, n; | 
|  |  | 
|  | bufs = kcalloc(nr_slots, sizeof(*bufs), | 
|  | GFP_KERNEL_ACCOUNT | __GFP_NOWARN); | 
|  | if (unlikely(!bufs)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | spin_lock_irq(&pipe->rd_wait.lock); | 
|  | mask = pipe->ring_size - 1; | 
|  | head = pipe->head; | 
|  | tail = pipe->tail; | 
|  |  | 
|  | n = pipe_occupancy(head, tail); | 
|  | if (nr_slots < n) { | 
|  | spin_unlock_irq(&pipe->rd_wait.lock); | 
|  | kfree(bufs); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The pipe array wraps around, so just start the new one at zero | 
|  | * and adjust the indices. | 
|  | */ | 
|  | if (n > 0) { | 
|  | unsigned int h = head & mask; | 
|  | unsigned int t = tail & mask; | 
|  | if (h > t) { | 
|  | memcpy(bufs, pipe->bufs + t, | 
|  | n * sizeof(struct pipe_buffer)); | 
|  | } else { | 
|  | unsigned int tsize = pipe->ring_size - t; | 
|  | if (h > 0) | 
|  | memcpy(bufs + tsize, pipe->bufs, | 
|  | h * sizeof(struct pipe_buffer)); | 
|  | memcpy(bufs, pipe->bufs + t, | 
|  | tsize * sizeof(struct pipe_buffer)); | 
|  | } | 
|  | } | 
|  |  | 
|  | head = n; | 
|  | tail = 0; | 
|  |  | 
|  | kfree(pipe->bufs); | 
|  | pipe->bufs = bufs; | 
|  | pipe->ring_size = nr_slots; | 
|  | if (pipe->max_usage > nr_slots) | 
|  | pipe->max_usage = nr_slots; | 
|  | pipe->tail = tail; | 
|  | pipe->head = head; | 
|  |  | 
|  | spin_unlock_irq(&pipe->rd_wait.lock); | 
|  |  | 
|  | /* This might have made more room for writers */ | 
|  | wake_up_interruptible(&pipe->wr_wait); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate a new array of pipe buffers and copy the info over. Returns the | 
|  | * pipe size if successful, or return -ERROR on error. | 
|  | */ | 
|  | static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg) | 
|  | { | 
|  | unsigned long user_bufs; | 
|  | unsigned int nr_slots, size; | 
|  | long ret = 0; | 
|  |  | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (pipe->watch_queue) | 
|  | return -EBUSY; | 
|  | #endif | 
|  |  | 
|  | size = round_pipe_size(arg); | 
|  | nr_slots = size >> PAGE_SHIFT; | 
|  |  | 
|  | if (!nr_slots) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * If trying to increase the pipe capacity, check that an | 
|  | * unprivileged user is not trying to exceed various limits | 
|  | * (soft limit check here, hard limit check just below). | 
|  | * Decreasing the pipe capacity is always permitted, even | 
|  | * if the user is currently over a limit. | 
|  | */ | 
|  | if (nr_slots > pipe->max_usage && | 
|  | size > pipe_max_size && !capable(CAP_SYS_RESOURCE)) | 
|  | return -EPERM; | 
|  |  | 
|  | user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_slots); | 
|  |  | 
|  | if (nr_slots > pipe->max_usage && | 
|  | (too_many_pipe_buffers_hard(user_bufs) || | 
|  | too_many_pipe_buffers_soft(user_bufs)) && | 
|  | pipe_is_unprivileged_user()) { | 
|  | ret = -EPERM; | 
|  | goto out_revert_acct; | 
|  | } | 
|  |  | 
|  | ret = pipe_resize_ring(pipe, nr_slots); | 
|  | if (ret < 0) | 
|  | goto out_revert_acct; | 
|  |  | 
|  | pipe->max_usage = nr_slots; | 
|  | pipe->nr_accounted = nr_slots; | 
|  | return pipe->max_usage * PAGE_SIZE; | 
|  |  | 
|  | out_revert_acct: | 
|  | (void) account_pipe_buffers(pipe->user, nr_slots, pipe->nr_accounted); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note that i_pipe and i_cdev share the same location, so checking ->i_pipe is | 
|  | * not enough to verify that this is a pipe. | 
|  | */ | 
|  | struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice) | 
|  | { | 
|  | struct pipe_inode_info *pipe = file->private_data; | 
|  |  | 
|  | if (file->f_op != &pipefifo_fops || !pipe) | 
|  | return NULL; | 
|  | #ifdef CONFIG_WATCH_QUEUE | 
|  | if (for_splice && pipe->watch_queue) | 
|  | return NULL; | 
|  | #endif | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct pipe_inode_info *pipe; | 
|  | long ret; | 
|  |  | 
|  | pipe = get_pipe_info(file, false); | 
|  | if (!pipe) | 
|  | return -EBADF; | 
|  |  | 
|  | __pipe_lock(pipe); | 
|  |  | 
|  | switch (cmd) { | 
|  | case F_SETPIPE_SZ: | 
|  | ret = pipe_set_size(pipe, arg); | 
|  | break; | 
|  | case F_GETPIPE_SZ: | 
|  | ret = pipe->max_usage * PAGE_SIZE; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | __pipe_unlock(pipe); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct super_operations pipefs_ops = { | 
|  | .destroy_inode = free_inode_nonrcu, | 
|  | .statfs = simple_statfs, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * pipefs should _never_ be mounted by userland - too much of security hassle, | 
|  | * no real gain from having the whole whorehouse mounted. So we don't need | 
|  | * any operations on the root directory. However, we need a non-trivial | 
|  | * d_name - pipe: will go nicely and kill the special-casing in procfs. | 
|  | */ | 
|  |  | 
|  | static int pipefs_init_fs_context(struct fs_context *fc) | 
|  | { | 
|  | struct pseudo_fs_context *ctx = init_pseudo(fc, PIPEFS_MAGIC); | 
|  | if (!ctx) | 
|  | return -ENOMEM; | 
|  | ctx->ops = &pipefs_ops; | 
|  | ctx->dops = &pipefs_dentry_operations; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct file_system_type pipe_fs_type = { | 
|  | .name		= "pipefs", | 
|  | .init_fs_context = pipefs_init_fs_context, | 
|  | .kill_sb	= kill_anon_super, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_SYSCTL | 
|  | static int do_proc_dopipe_max_size_conv(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | unsigned int val; | 
|  |  | 
|  | val = round_pipe_size(*lvalp); | 
|  | if (val == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | *valp = val; | 
|  | } else { | 
|  | unsigned int val = *valp; | 
|  | *lvalp = (unsigned long) val; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_dopipe_max_size(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_douintvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_dopipe_max_size_conv, NULL); | 
|  | } | 
|  |  | 
|  | static struct ctl_table fs_pipe_sysctls[] = { | 
|  | { | 
|  | .procname	= "pipe-max-size", | 
|  | .data		= &pipe_max_size, | 
|  | .maxlen		= sizeof(pipe_max_size), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dopipe_max_size, | 
|  | }, | 
|  | { | 
|  | .procname	= "pipe-user-pages-hard", | 
|  | .data		= &pipe_user_pages_hard, | 
|  | .maxlen		= sizeof(pipe_user_pages_hard), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | { | 
|  | .procname	= "pipe-user-pages-soft", | 
|  | .data		= &pipe_user_pages_soft, | 
|  | .maxlen		= sizeof(pipe_user_pages_soft), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int __init init_pipe_fs(void) | 
|  | { | 
|  | int err = register_filesystem(&pipe_fs_type); | 
|  |  | 
|  | if (!err) { | 
|  | pipe_mnt = kern_mount(&pipe_fs_type); | 
|  | if (IS_ERR(pipe_mnt)) { | 
|  | err = PTR_ERR(pipe_mnt); | 
|  | unregister_filesystem(&pipe_fs_type); | 
|  | } | 
|  | } | 
|  | #ifdef CONFIG_SYSCTL | 
|  | register_sysctl_init("fs", fs_pipe_sysctls); | 
|  | #endif | 
|  | return err; | 
|  | } | 
|  |  | 
|  | fs_initcall(init_pipe_fs); |