| /* | |
| * drivers/leds/leds-apu.c | |
| * Copyright (C) 2017 Alan Mizrahi, alan at mizrahi dot com dot ve | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the names of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/dmi.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/leds.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #define APU1_FCH_ACPI_MMIO_BASE 0xFED80000 | |
| #define APU1_FCH_GPIO_BASE (APU1_FCH_ACPI_MMIO_BASE + 0x01BD) | |
| #define APU1_LEDON 0x08 | |
| #define APU1_LEDOFF 0xC8 | |
| #define APU1_NUM_GPIO 3 | |
| #define APU1_IOSIZE sizeof(u8) | |
| /* LED access parameters */ | |
| struct apu_param { | |
| void __iomem *addr; /* for ioread/iowrite */ | |
| }; | |
| /* LED private data */ | |
| struct apu_led_priv { | |
| struct led_classdev cdev; | |
| struct apu_param param; | |
| }; | |
| #define cdev_to_priv(c) container_of(c, struct apu_led_priv, cdev) | |
| /* LED profile */ | |
| struct apu_led_profile { | |
| const char *name; | |
| enum led_brightness brightness; | |
| unsigned long offset; /* for devm_ioremap */ | |
| }; | |
| struct apu_led_pdata { | |
| struct platform_device *pdev; | |
| struct apu_led_priv *pled; | |
| spinlock_t lock; | |
| }; | |
| static struct apu_led_pdata *apu_led; | |
| static const struct apu_led_profile apu1_led_profile[] = { | |
| { "apu:green:1", LED_ON, APU1_FCH_GPIO_BASE + 0 * APU1_IOSIZE }, | |
| { "apu:green:2", LED_OFF, APU1_FCH_GPIO_BASE + 1 * APU1_IOSIZE }, | |
| { "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE }, | |
| }; | |
| static const struct dmi_system_id apu_led_dmi_table[] __initconst = { | |
| /* PC Engines APU with factory bios "SageBios_PCEngines_APU-45" */ | |
| { | |
| .ident = "apu", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "APU") | |
| } | |
| }, | |
| /* PC Engines APU with "Mainline" bios >= 4.6.8 */ | |
| { | |
| .ident = "apu", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "apu1") | |
| } | |
| }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table); | |
| static void apu1_led_brightness_set(struct led_classdev *led, enum led_brightness value) | |
| { | |
| struct apu_led_priv *pled = cdev_to_priv(led); | |
| spin_lock(&apu_led->lock); | |
| iowrite8(value ? APU1_LEDON : APU1_LEDOFF, pled->param.addr); | |
| spin_unlock(&apu_led->lock); | |
| } | |
| static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld) | |
| { | |
| int i; | |
| int err; | |
| apu_led->pled = devm_kcalloc(dev, | |
| ARRAY_SIZE(apu1_led_profile), sizeof(struct apu_led_priv), | |
| GFP_KERNEL); | |
| if (!apu_led->pled) | |
| return -ENOMEM; | |
| for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++) { | |
| struct apu_led_priv *pled = &apu_led->pled[i]; | |
| struct led_classdev *led_cdev = &pled->cdev; | |
| led_cdev->name = apu1_led_profile[i].name; | |
| led_cdev->brightness = apu1_led_profile[i].brightness; | |
| led_cdev->max_brightness = 1; | |
| led_cdev->flags = LED_CORE_SUSPENDRESUME; | |
| led_cdev->brightness_set = apu1_led_brightness_set; | |
| pled->param.addr = devm_ioremap(dev, | |
| apu1_led_profile[i].offset, APU1_IOSIZE); | |
| if (!pled->param.addr) { | |
| err = -ENOMEM; | |
| goto error; | |
| } | |
| err = led_classdev_register(dev, led_cdev); | |
| if (err) | |
| goto error; | |
| apu1_led_brightness_set(led_cdev, apu1_led_profile[i].brightness); | |
| } | |
| return 0; | |
| error: | |
| while (i-- > 0) | |
| led_classdev_unregister(&apu_led->pled[i].cdev); | |
| return err; | |
| } | |
| static int __init apu_led_probe(struct platform_device *pdev) | |
| { | |
| apu_led = devm_kzalloc(&pdev->dev, sizeof(*apu_led), GFP_KERNEL); | |
| if (!apu_led) | |
| return -ENOMEM; | |
| apu_led->pdev = pdev; | |
| spin_lock_init(&apu_led->lock); | |
| return apu_led_config(&pdev->dev, apu_led); | |
| } | |
| static struct platform_driver apu_led_driver = { | |
| .driver = { | |
| .name = KBUILD_MODNAME, | |
| }, | |
| }; | |
| static int __init apu_led_init(void) | |
| { | |
| struct platform_device *pdev; | |
| int err; | |
| if (!dmi_check_system(apu_led_dmi_table)) { | |
| pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n"); | |
| return -ENODEV; | |
| } | |
| pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); | |
| if (IS_ERR(pdev)) { | |
| pr_err("Device allocation failed\n"); | |
| return PTR_ERR(pdev); | |
| } | |
| err = platform_driver_probe(&apu_led_driver, apu_led_probe); | |
| if (err) { | |
| pr_err("Probe platform driver failed\n"); | |
| platform_device_unregister(pdev); | |
| } | |
| return err; | |
| } | |
| static void __exit apu_led_exit(void) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++) | |
| led_classdev_unregister(&apu_led->pled[i].cdev); | |
| platform_device_unregister(apu_led->pdev); | |
| platform_driver_unregister(&apu_led_driver); | |
| } | |
| module_init(apu_led_init); | |
| module_exit(apu_led_exit); | |
| MODULE_AUTHOR("Alan Mizrahi"); | |
| MODULE_DESCRIPTION("PC Engines APU1 front LED driver"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("platform:leds_apu"); |