blob: d30fada2ac396dff6b6c6b575a9ba38afde57e80 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Actions Semi Owl SoCs Ethernet MAC Controller
maintainers:
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
description: |
This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
It provides the RMII and SMII interfaces and is compliant with the
IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
operation modes at 10/100 Mb/s data transfer rates.
allOf:
- $ref: "ethernet-controller.yaml#"
properties:
compatible:
oneOf:
- const: actions,owl-emac
- items:
- enum:
- actions,s500-emac
- const: actions,owl-emac
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 2
maxItems: 2
clock-names:
additionalItems: false
items:
- const: eth
- const: rmii
resets:
maxItems: 1
actions,ethcfg:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the device containing custom config.
mdio:
$ref: mdio.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- phy-mode
- phy-handle
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/actions,s500-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/actions,s500-reset.h>
ethernet@b0310000 {
compatible = "actions,s500-emac", "actions,owl-emac";
reg = <0xb0310000 0x10000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
clock-names = "eth", "rmii";
resets = <&cmu RESET_ETHERNET>;
phy-mode = "rmii";
phy-handle = <&eth_phy>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
eth_phy: ethernet-phy@3 {
reg = <0x3>;
interrupt-parent = <&sirq>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
};