|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Raspberry Pi firmware based touchscreen driver | 
|  | * | 
|  | * Copyright (C) 2015, 2017 Raspberry Pi | 
|  | * Copyright (C) 2018 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> | 
|  | */ | 
|  |  | 
|  | #include <linux/io.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/mt.h> | 
|  | #include <linux/input/touchscreen.h> | 
|  | #include <soc/bcm2835/raspberrypi-firmware.h> | 
|  |  | 
|  | #define RPI_TS_DEFAULT_WIDTH	800 | 
|  | #define RPI_TS_DEFAULT_HEIGHT	480 | 
|  |  | 
|  | #define RPI_TS_MAX_SUPPORTED_POINTS	10 | 
|  |  | 
|  | #define RPI_TS_FTS_TOUCH_DOWN		0 | 
|  | #define RPI_TS_FTS_TOUCH_CONTACT	2 | 
|  |  | 
|  | #define RPI_TS_POLL_INTERVAL		17	/* 60fps */ | 
|  |  | 
|  | #define RPI_TS_NPOINTS_REG_INVALIDATE	99 | 
|  |  | 
|  | struct rpi_ts { | 
|  | struct platform_device *pdev; | 
|  | struct input_dev *input; | 
|  | struct touchscreen_properties prop; | 
|  |  | 
|  | void __iomem *fw_regs_va; | 
|  | dma_addr_t fw_regs_phys; | 
|  |  | 
|  | int known_ids; | 
|  | }; | 
|  |  | 
|  | struct rpi_ts_regs { | 
|  | u8 device_mode; | 
|  | u8 gesture_id; | 
|  | u8 num_points; | 
|  | struct rpi_ts_touch { | 
|  | u8 xh; | 
|  | u8 xl; | 
|  | u8 yh; | 
|  | u8 yl; | 
|  | u8 pressure; /* Not supported */ | 
|  | u8 area;     /* Not supported */ | 
|  | } point[RPI_TS_MAX_SUPPORTED_POINTS]; | 
|  | }; | 
|  |  | 
|  | static void rpi_ts_poll(struct input_dev *input) | 
|  | { | 
|  | struct rpi_ts *ts = input_get_drvdata(input); | 
|  | struct rpi_ts_regs regs; | 
|  | int modified_ids = 0; | 
|  | long released_ids; | 
|  | int event_type; | 
|  | int touchid; | 
|  | int x, y; | 
|  | int i; | 
|  |  | 
|  | memcpy_fromio(®s, ts->fw_regs_va, sizeof(regs)); | 
|  | /* | 
|  | * We poll the memory based register copy of the touchscreen chip using | 
|  | * the number of points register to know whether the copy has been | 
|  | * updated (we write 99 to the memory copy, the GPU will write between | 
|  | * 0 - 10 points) | 
|  | */ | 
|  | iowrite8(RPI_TS_NPOINTS_REG_INVALIDATE, | 
|  | ts->fw_regs_va + offsetof(struct rpi_ts_regs, num_points)); | 
|  |  | 
|  | if (regs.num_points == RPI_TS_NPOINTS_REG_INVALIDATE || | 
|  | (regs.num_points == 0 && ts->known_ids == 0)) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < regs.num_points; i++) { | 
|  | x = (((int)regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; | 
|  | y = (((int)regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; | 
|  | touchid = (regs.point[i].yh >> 4) & 0xf; | 
|  | event_type = (regs.point[i].xh >> 6) & 0x03; | 
|  |  | 
|  | modified_ids |= BIT(touchid); | 
|  |  | 
|  | if (event_type == RPI_TS_FTS_TOUCH_DOWN || | 
|  | event_type == RPI_TS_FTS_TOUCH_CONTACT) { | 
|  | input_mt_slot(input, touchid); | 
|  | input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); | 
|  | touchscreen_report_pos(input, &ts->prop, x, y, true); | 
|  | } | 
|  | } | 
|  |  | 
|  | released_ids = ts->known_ids & ~modified_ids; | 
|  | for_each_set_bit(i, &released_ids, RPI_TS_MAX_SUPPORTED_POINTS) { | 
|  | input_mt_slot(input, i); | 
|  | input_mt_report_slot_state(input, MT_TOOL_FINGER, 0); | 
|  | modified_ids &= ~(BIT(i)); | 
|  | } | 
|  | ts->known_ids = modified_ids; | 
|  |  | 
|  | input_mt_sync_frame(input); | 
|  | input_sync(input); | 
|  | } | 
|  |  | 
|  | static void rpi_ts_dma_cleanup(void *data) | 
|  | { | 
|  | struct rpi_ts *ts = data; | 
|  | struct device *dev = &ts->pdev->dev; | 
|  |  | 
|  | dma_free_coherent(dev, PAGE_SIZE, ts->fw_regs_va, ts->fw_regs_phys); | 
|  | } | 
|  |  | 
|  | static int rpi_ts_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  | struct input_dev *input; | 
|  | struct device_node *fw_node; | 
|  | struct rpi_firmware *fw; | 
|  | struct rpi_ts *ts; | 
|  | u32 touchbuf; | 
|  | int error; | 
|  |  | 
|  | fw_node = of_get_parent(np); | 
|  | if (!fw_node) { | 
|  | dev_err(dev, "Missing firmware node\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | fw = rpi_firmware_get(fw_node); | 
|  | of_node_put(fw_node); | 
|  | if (!fw) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); | 
|  | if (!ts) | 
|  | return -ENOMEM; | 
|  | ts->pdev = pdev; | 
|  |  | 
|  | ts->fw_regs_va = dma_alloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys, | 
|  | GFP_KERNEL); | 
|  | if (!ts->fw_regs_va) { | 
|  | dev_err(dev, "failed to dma_alloc_coherent\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | error = devm_add_action_or_reset(dev, rpi_ts_dma_cleanup, ts); | 
|  | if (error) { | 
|  | dev_err(dev, "failed to devm_add_action_or_reset, %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | touchbuf = (u32)ts->fw_regs_phys; | 
|  | error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, | 
|  | &touchbuf, sizeof(touchbuf)); | 
|  |  | 
|  | if (error || touchbuf != 0) { | 
|  | dev_warn(dev, "Failed to set touchbuf, %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | input = devm_input_allocate_device(dev); | 
|  | if (!input) { | 
|  | dev_err(dev, "Failed to allocate input device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ts->input = input; | 
|  | input_set_drvdata(input, ts); | 
|  |  | 
|  | input->name = "raspberrypi-ts"; | 
|  | input->id.bustype = BUS_HOST; | 
|  |  | 
|  | input_set_abs_params(input, ABS_MT_POSITION_X, 0, | 
|  | RPI_TS_DEFAULT_WIDTH, 0, 0); | 
|  | input_set_abs_params(input, ABS_MT_POSITION_Y, 0, | 
|  | RPI_TS_DEFAULT_HEIGHT, 0, 0); | 
|  | touchscreen_parse_properties(input, true, &ts->prop); | 
|  |  | 
|  | error = input_mt_init_slots(input, RPI_TS_MAX_SUPPORTED_POINTS, | 
|  | INPUT_MT_DIRECT); | 
|  | if (error) { | 
|  | dev_err(dev, "could not init mt slots, %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | error = input_setup_polling(input, rpi_ts_poll); | 
|  | if (error) { | 
|  | dev_err(dev, "could not set up polling mode, %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | input_set_poll_interval(input, RPI_TS_POLL_INTERVAL); | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) { | 
|  | dev_err(dev, "could not register input device, %d\n", error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id rpi_ts_match[] = { | 
|  | { .compatible = "raspberrypi,firmware-ts", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, rpi_ts_match); | 
|  |  | 
|  | static struct platform_driver rpi_ts_driver = { | 
|  | .driver = { | 
|  | .name = "raspberrypi-ts", | 
|  | .of_match_table = rpi_ts_match, | 
|  | }, | 
|  | .probe = rpi_ts_probe, | 
|  | }; | 
|  | module_platform_driver(rpi_ts_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Gordon Hollingworth"); | 
|  | MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); | 
|  | MODULE_DESCRIPTION("Raspberry Pi firmware based touchscreen driver"); | 
|  | MODULE_LICENSE("GPL v2"); |