| /* | 
 |  * OHCI HCD (Host Controller Driver) for USB. | 
 |  * | 
 |  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> | 
 |  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> | 
 |  * (C) Copyright 2002 Hewlett-Packard Company | 
 |  * | 
 |  * Bus Glue for Sharp LH7A404 | 
 |  * | 
 |  * Written by Christopher Hoover <ch@hpl.hp.com> | 
 |  * Based on fragments of previous driver by Rusell King et al. | 
 |  * | 
 |  * Modified for LH7A404 from ohci-sa1111.c | 
 |  *  by Durgesh Pattamatta <pattamattad@sharpsec.com> | 
 |  * | 
 |  * This file is licenced under the GPL. | 
 |  */ | 
 |  | 
 | #include <asm/hardware.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/arch/hardware.h> | 
 |  | 
 |  | 
 | extern int usb_disabled(void); | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static void lh7a404_start_hc(struct platform_device *dev) | 
 | { | 
 | 	printk(KERN_DEBUG __FILE__ | 
 | 	       ": starting LH7A404 OHCI USB Controller\n"); | 
 |  | 
 | 	/* | 
 | 	 * Now, carefully enable the USB clock, and take | 
 | 	 * the USB host controller out of reset. | 
 | 	 */ | 
 | 	CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */ | 
 | 	udelay(1000); | 
 | 	USBH_CMDSTATUS = OHCI_HCR; | 
 | 	 | 
 | 	printk(KERN_DEBUG __FILE__ | 
 | 		   ": Clock to USB host has been enabled \n"); | 
 | } | 
 |  | 
 | static void lh7a404_stop_hc(struct platform_device *dev) | 
 | { | 
 | 	printk(KERN_DEBUG __FILE__ | 
 | 	       ": stopping LH7A404 OHCI USB Controller\n"); | 
 |  | 
 | 	CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */ | 
 | } | 
 |  | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | /* configure so an HC device and id are always provided */ | 
 | /* always called with process context; sleeping is OK */ | 
 |  | 
 |  | 
 | /** | 
 |  * usb_hcd_lh7a404_probe - initialize LH7A404-based HCDs | 
 |  * Context: !in_interrupt() | 
 |  * | 
 |  * Allocates basic resources for this USB host controller, and | 
 |  * then invokes the start() method for the HCD associated with it | 
 |  * through the hotplug entry's driver_data. | 
 |  * | 
 |  */ | 
 | int usb_hcd_lh7a404_probe (const struct hc_driver *driver, | 
 | 			  struct platform_device *dev) | 
 | { | 
 | 	int retval; | 
 | 	struct usb_hcd *hcd; | 
 |  | 
 | 	if (dev->resource[1].flags != IORESOURCE_IRQ) { | 
 | 		pr_debug("resource[1] is not IORESOURCE_IRQ"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	hcd = usb_create_hcd(driver, &dev->dev, "lh7a404"); | 
 | 	if (!hcd) | 
 | 		return -ENOMEM; | 
 | 	hcd->rsrc_start = dev->resource[0].start; | 
 | 	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; | 
 |  | 
 | 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { | 
 | 		pr_debug("request_mem_region failed"); | 
 | 		retval = -EBUSY; | 
 | 		goto err1; | 
 | 	} | 
 | 	 | 
 | 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); | 
 | 	if (!hcd->regs) { | 
 | 		pr_debug("ioremap failed"); | 
 | 		retval = -ENOMEM; | 
 | 		goto err2; | 
 | 	} | 
 |  | 
 | 	lh7a404_start_hc(dev); | 
 | 	ohci_hcd_init(hcd_to_ohci(hcd)); | 
 |  | 
 | 	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); | 
 | 	if (retval == 0) | 
 | 		return retval; | 
 |  | 
 | 	lh7a404_stop_hc(dev); | 
 | 	iounmap(hcd->regs); | 
 |  err2: | 
 | 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
 |  err1: | 
 | 	usb_put_hcd(hcd); | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 | /* may be called without controller electrically present */ | 
 | /* may be called with controller, bus, and devices active */ | 
 |  | 
 | /** | 
 |  * usb_hcd_lh7a404_remove - shutdown processing for LH7A404-based HCDs | 
 |  * @dev: USB Host Controller being removed | 
 |  * Context: !in_interrupt() | 
 |  * | 
 |  * Reverses the effect of usb_hcd_lh7a404_probe(), first invoking | 
 |  * the HCD's stop() method.  It is always called from a thread | 
 |  * context, normally "rmmod", "apmd", or something similar. | 
 |  * | 
 |  */ | 
 | void usb_hcd_lh7a404_remove (struct usb_hcd *hcd, struct platform_device *dev) | 
 | { | 
 | 	usb_remove_hcd(hcd); | 
 | 	lh7a404_stop_hc(dev); | 
 | 	iounmap(hcd->regs); | 
 | 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
 | 	usb_put_hcd(hcd); | 
 | } | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static int __devinit | 
 | ohci_lh7a404_start (struct usb_hcd *hcd) | 
 | { | 
 | 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd); | 
 | 	int		ret; | 
 |  | 
 | 	ohci_dbg (ohci, "ohci_lh7a404_start, ohci:%p", ohci); | 
 | 	if ((ret = ohci_init(ohci)) < 0) | 
 | 		return ret; | 
 |  | 
 | 	if ((ret = ohci_run (ohci)) < 0) { | 
 | 		err ("can't start %s", hcd->self.bus_name); | 
 | 		ohci_stop (hcd); | 
 | 		return ret; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static const struct hc_driver ohci_lh7a404_hc_driver = { | 
 | 	.description =		hcd_name, | 
 | 	.product_desc =		"LH7A404 OHCI", | 
 | 	.hcd_priv_size =	sizeof(struct ohci_hcd), | 
 |  | 
 | 	/* | 
 | 	 * generic hardware linkage | 
 | 	 */ | 
 | 	.irq =			ohci_irq, | 
 | 	.flags =		HCD_USB11 | HCD_MEMORY, | 
 |  | 
 | 	/* | 
 | 	 * basic lifecycle operations | 
 | 	 */ | 
 | 	.start =		ohci_lh7a404_start, | 
 | #ifdef	CONFIG_PM | 
 | 	/* suspend:		ohci_lh7a404_suspend,  -- tbd */ | 
 | 	/* resume:		ohci_lh7a404_resume,   -- tbd */ | 
 | #endif /*CONFIG_PM*/ | 
 | 	.stop =			ohci_stop, | 
 |  | 
 | 	/* | 
 | 	 * managing i/o requests and associated device resources | 
 | 	 */ | 
 | 	.urb_enqueue =		ohci_urb_enqueue, | 
 | 	.urb_dequeue =		ohci_urb_dequeue, | 
 | 	.endpoint_disable =	ohci_endpoint_disable, | 
 |  | 
 | 	/* | 
 | 	 * scheduling support | 
 | 	 */ | 
 | 	.get_frame_number =	ohci_get_frame, | 
 |  | 
 | 	/* | 
 | 	 * root hub support | 
 | 	 */ | 
 | 	.hub_status_data =	ohci_hub_status_data, | 
 | 	.hub_control =		ohci_hub_control, | 
 | }; | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static int ohci_hcd_lh7a404_drv_probe(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	int ret; | 
 |  | 
 | 	pr_debug ("In ohci_hcd_lh7a404_drv_probe"); | 
 |  | 
 | 	if (usb_disabled()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	ret = usb_hcd_lh7a404_probe(&ohci_lh7a404_hc_driver, pdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ohci_hcd_lh7a404_drv_remove(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct usb_hcd *hcd = dev_get_drvdata(dev); | 
 |  | 
 | 	usb_hcd_lh7a404_remove(hcd, pdev); | 
 | 	return 0; | 
 | } | 
 | 	/*TBD*/ | 
 | /*static int ohci_hcd_lh7a404_drv_suspend(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct usb_hcd *hcd = dev_get_drvdata(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 | static int ohci_hcd_lh7a404_drv_resume(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct usb_hcd *hcd = dev_get_drvdata(dev); | 
 |  | 
 |  | 
 | 	return 0; | 
 | } | 
 | */ | 
 |  | 
 | static struct device_driver ohci_hcd_lh7a404_driver = { | 
 | 	.name		= "lh7a404-ohci", | 
 | 	.bus		= &platform_bus_type, | 
 | 	.probe		= ohci_hcd_lh7a404_drv_probe, | 
 | 	.remove		= ohci_hcd_lh7a404_drv_remove, | 
 | 	/*.suspend	= ohci_hcd_lh7a404_drv_suspend, */ | 
 | 	/*.resume	= ohci_hcd_lh7a404_drv_resume, */ | 
 | }; | 
 |  | 
 | static int __init ohci_hcd_lh7a404_init (void) | 
 | { | 
 | 	pr_debug (DRIVER_INFO " (LH7A404)"); | 
 | 	pr_debug ("block sizes: ed %d td %d\n", | 
 | 		sizeof (struct ed), sizeof (struct td)); | 
 |  | 
 | 	return driver_register(&ohci_hcd_lh7a404_driver); | 
 | } | 
 |  | 
 | static void __exit ohci_hcd_lh7a404_cleanup (void) | 
 | { | 
 | 	driver_unregister(&ohci_hcd_lh7a404_driver); | 
 | } | 
 |  | 
 | module_init (ohci_hcd_lh7a404_init); | 
 | module_exit (ohci_hcd_lh7a404_cleanup); |