|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Remote Processor Framework Elf loader | 
|  | * | 
|  | * Copyright (C) 2011 Texas Instruments, Inc. | 
|  | * Copyright (C) 2011 Google, Inc. | 
|  | * | 
|  | * Ohad Ben-Cohen <ohad@wizery.com> | 
|  | * Brian Swetland <swetland@google.com> | 
|  | * Mark Grosen <mgrosen@ti.com> | 
|  | * Fernando Guzman Lugo <fernando.lugo@ti.com> | 
|  | * Suman Anna <s-anna@ti.com> | 
|  | * Robert Tivy <rtivy@ti.com> | 
|  | * Armando Uribe De Leon <x0095078@ti.com> | 
|  | * Sjur Brændeland <sjur.brandeland@stericsson.com> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt)    "%s: " fmt, __func__ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/remoteproc.h> | 
|  | #include <linux/elf.h> | 
|  |  | 
|  | #include "remoteproc_internal.h" | 
|  |  | 
|  | /** | 
|  | * rproc_elf_sanity_check() - Sanity Check ELF firmware image | 
|  | * @rproc: the remote processor handle | 
|  | * @fw: the ELF firmware image | 
|  | * | 
|  | * Make sure this fw image is sane. | 
|  | */ | 
|  | int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) | 
|  | { | 
|  | const char *name = rproc->firmware; | 
|  | struct device *dev = &rproc->dev; | 
|  | struct elf32_hdr *ehdr; | 
|  | char class; | 
|  |  | 
|  | if (!fw) { | 
|  | dev_err(dev, "failed to load %s\n", name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (fw->size < sizeof(struct elf32_hdr)) { | 
|  | dev_err(dev, "Image is too small\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ehdr = (struct elf32_hdr *)fw->data; | 
|  |  | 
|  | /* We only support ELF32 at this point */ | 
|  | class = ehdr->e_ident[EI_CLASS]; | 
|  | if (class != ELFCLASS32) { | 
|  | dev_err(dev, "Unsupported class: %d\n", class); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* We assume the firmware has the same endianness as the host */ | 
|  | # ifdef __LITTLE_ENDIAN | 
|  | if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { | 
|  | # else /* BIG ENDIAN */ | 
|  | if (ehdr->e_ident[EI_DATA] != ELFDATA2MSB) { | 
|  | # endif | 
|  | dev_err(dev, "Unsupported firmware endianness\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) { | 
|  | dev_err(dev, "Image is too small\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { | 
|  | dev_err(dev, "Image is corrupted (bad magic)\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ehdr->e_phnum == 0) { | 
|  | dev_err(dev, "No loadable segments\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ehdr->e_phoff > fw->size) { | 
|  | dev_err(dev, "Firmware size is too small\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(rproc_elf_sanity_check); | 
|  |  | 
|  | /** | 
|  | * rproc_elf_get_boot_addr() - Get rproc's boot address. | 
|  | * @rproc: the remote processor handle | 
|  | * @fw: the ELF firmware image | 
|  | * | 
|  | * This function returns the entry point address of the ELF | 
|  | * image. | 
|  | * | 
|  | * Note that the boot address is not a configurable property of all remote | 
|  | * processors. Some will always boot at a specific hard-coded address. | 
|  | */ | 
|  | u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) | 
|  | { | 
|  | struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data; | 
|  |  | 
|  | return ehdr->e_entry; | 
|  | } | 
|  | EXPORT_SYMBOL(rproc_elf_get_boot_addr); | 
|  |  | 
|  | /** | 
|  | * rproc_elf_load_segments() - load firmware segments to memory | 
|  | * @rproc: remote processor which will be booted using these fw segments | 
|  | * @fw: the ELF firmware image | 
|  | * | 
|  | * This function loads the firmware segments to memory, where the remote | 
|  | * processor expects them. | 
|  | * | 
|  | * Some remote processors will expect their code and data to be placed | 
|  | * in specific device addresses, and can't have them dynamically assigned. | 
|  | * | 
|  | * We currently support only those kind of remote processors, and expect | 
|  | * the program header's paddr member to contain those addresses. We then go | 
|  | * through the physically contiguous "carveout" memory regions which we | 
|  | * allocated (and mapped) earlier on behalf of the remote processor, | 
|  | * and "translate" device address to kernel addresses, so we can copy the | 
|  | * segments where they are expected. | 
|  | * | 
|  | * Currently we only support remote processors that required carveout | 
|  | * allocations and got them mapped onto their iommus. Some processors | 
|  | * might be different: they might not have iommus, and would prefer to | 
|  | * directly allocate memory for every segment/resource. This is not yet | 
|  | * supported, though. | 
|  | */ | 
|  | int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) | 
|  | { | 
|  | struct device *dev = &rproc->dev; | 
|  | struct elf32_hdr *ehdr; | 
|  | struct elf32_phdr *phdr; | 
|  | int i, ret = 0; | 
|  | const u8 *elf_data = fw->data; | 
|  |  | 
|  | ehdr = (struct elf32_hdr *)elf_data; | 
|  | phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff); | 
|  |  | 
|  | /* go through the available ELF segments */ | 
|  | for (i = 0; i < ehdr->e_phnum; i++, phdr++) { | 
|  | u32 da = phdr->p_paddr; | 
|  | u32 memsz = phdr->p_memsz; | 
|  | u32 filesz = phdr->p_filesz; | 
|  | u32 offset = phdr->p_offset; | 
|  | void *ptr; | 
|  |  | 
|  | if (phdr->p_type != PT_LOAD) | 
|  | continue; | 
|  |  | 
|  | dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n", | 
|  | phdr->p_type, da, memsz, filesz); | 
|  |  | 
|  | if (filesz > memsz) { | 
|  | dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n", | 
|  | filesz, memsz); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (offset + filesz > fw->size) { | 
|  | dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", | 
|  | offset + filesz, fw->size); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* grab the kernel address for this device address */ | 
|  | ptr = rproc_da_to_va(rproc, da, memsz); | 
|  | if (!ptr) { | 
|  | dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* put the segment where the remote processor expects it */ | 
|  | if (phdr->p_filesz) | 
|  | memcpy(ptr, elf_data + phdr->p_offset, filesz); | 
|  |  | 
|  | /* | 
|  | * Zero out remaining memory for this segment. | 
|  | * | 
|  | * This isn't strictly required since dma_alloc_coherent already | 
|  | * did this for us. albeit harmless, we may consider removing | 
|  | * this. | 
|  | */ | 
|  | if (memsz > filesz) | 
|  | memset(ptr + filesz, 0, memsz - filesz); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(rproc_elf_load_segments); | 
|  |  | 
|  | static struct elf32_shdr * | 
|  | find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size) | 
|  | { | 
|  | struct elf32_shdr *shdr; | 
|  | int i; | 
|  | const char *name_table; | 
|  | struct resource_table *table = NULL; | 
|  | const u8 *elf_data = (void *)ehdr; | 
|  |  | 
|  | /* look for the resource table and handle it */ | 
|  | shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); | 
|  | name_table = elf_data + shdr[ehdr->e_shstrndx].sh_offset; | 
|  |  | 
|  | for (i = 0; i < ehdr->e_shnum; i++, shdr++) { | 
|  | u32 size = shdr->sh_size; | 
|  | u32 offset = shdr->sh_offset; | 
|  |  | 
|  | if (strcmp(name_table + shdr->sh_name, ".resource_table")) | 
|  | continue; | 
|  |  | 
|  | table = (struct resource_table *)(elf_data + offset); | 
|  |  | 
|  | /* make sure we have the entire table */ | 
|  | if (offset + size > fw_size || offset + size < size) { | 
|  | dev_err(dev, "resource table truncated\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* make sure table has at least the header */ | 
|  | if (sizeof(struct resource_table) > size) { | 
|  | dev_err(dev, "header-less resource table\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* we don't support any version beyond the first */ | 
|  | if (table->ver != 1) { | 
|  | dev_err(dev, "unsupported fw ver: %d\n", table->ver); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* make sure reserved bytes are zeroes */ | 
|  | if (table->reserved[0] || table->reserved[1]) { | 
|  | dev_err(dev, "non zero reserved bytes\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* make sure the offsets array isn't truncated */ | 
|  | if (struct_size(table, offset, table->num) > size) { | 
|  | dev_err(dev, "resource table incomplete\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return shdr; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * rproc_elf_load_rsc_table() - load the resource table | 
|  | * @rproc: the rproc handle | 
|  | * @fw: the ELF firmware image | 
|  | * | 
|  | * This function finds the resource table inside the remote processor's | 
|  | * firmware, load it into the @cached_table and update @table_ptr. | 
|  | * | 
|  | * Return: 0 on success, negative errno on failure. | 
|  | */ | 
|  | int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw) | 
|  | { | 
|  | struct elf32_hdr *ehdr; | 
|  | struct elf32_shdr *shdr; | 
|  | struct device *dev = &rproc->dev; | 
|  | struct resource_table *table = NULL; | 
|  | const u8 *elf_data = fw->data; | 
|  | size_t tablesz; | 
|  |  | 
|  | ehdr = (struct elf32_hdr *)elf_data; | 
|  |  | 
|  | shdr = find_table(dev, ehdr, fw->size); | 
|  | if (!shdr) | 
|  | return -EINVAL; | 
|  |  | 
|  | table = (struct resource_table *)(elf_data + shdr->sh_offset); | 
|  | tablesz = shdr->sh_size; | 
|  |  | 
|  | /* | 
|  | * Create a copy of the resource table. When a virtio device starts | 
|  | * and calls vring_new_virtqueue() the address of the allocated vring | 
|  | * will be stored in the cached_table. Before the device is started, | 
|  | * cached_table will be copied into device memory. | 
|  | */ | 
|  | rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL); | 
|  | if (!rproc->cached_table) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rproc->table_ptr = rproc->cached_table; | 
|  | rproc->table_sz = tablesz; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(rproc_elf_load_rsc_table); | 
|  |  | 
|  | /** | 
|  | * rproc_elf_find_loaded_rsc_table() - find the loaded resource table | 
|  | * @rproc: the rproc handle | 
|  | * @fw: the ELF firmware image | 
|  | * | 
|  | * This function finds the location of the loaded resource table. Don't | 
|  | * call this function if the table wasn't loaded yet - it's a bug if you do. | 
|  | * | 
|  | * Returns the pointer to the resource table if it is found or NULL otherwise. | 
|  | * If the table wasn't loaded yet the result is unspecified. | 
|  | */ | 
|  | struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, | 
|  | const struct firmware *fw) | 
|  | { | 
|  | struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data; | 
|  | struct elf32_shdr *shdr; | 
|  |  | 
|  | shdr = find_table(&rproc->dev, ehdr, fw->size); | 
|  | if (!shdr) | 
|  | return NULL; | 
|  |  | 
|  | return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size); | 
|  | } | 
|  | EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table); |