|  | 
 | #ifndef _I386_HPET_H | 
 | #define _I386_HPET_H | 
 |  | 
 | #ifdef CONFIG_HPET_TIMER | 
 |  | 
 | #include <linux/errno.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/param.h> | 
 | #include <linux/string.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/time.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/init.h> | 
 | #include <linux/smp.h> | 
 |  | 
 | #include <asm/io.h> | 
 | #include <asm/smp.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/msr.h> | 
 | #include <asm/delay.h> | 
 | #include <asm/mpspec.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/processor.h> | 
 |  | 
 | #include <linux/timex.h> | 
 | #include <linux/config.h> | 
 |  | 
 | #include <asm/fixmap.h> | 
 |  | 
 | /* | 
 |  * Documentation on HPET can be found at: | 
 |  *      http://www.intel.com/ial/home/sp/pcmmspec.htm | 
 |  *      ftp://download.intel.com/ial/home/sp/mmts098.pdf | 
 |  */ | 
 |  | 
 | #define HPET_MMAP_SIZE	1024 | 
 |  | 
 | #define HPET_ID		0x000 | 
 | #define HPET_PERIOD	0x004 | 
 | #define HPET_CFG	0x010 | 
 | #define HPET_STATUS	0x020 | 
 | #define HPET_COUNTER	0x0f0 | 
 | #define HPET_T0_CFG	0x100 | 
 | #define HPET_T0_CMP	0x108 | 
 | #define HPET_T0_ROUTE	0x110 | 
 | #define HPET_T1_CFG	0x120 | 
 | #define HPET_T1_CMP	0x128 | 
 | #define HPET_T1_ROUTE	0x130 | 
 | #define HPET_T2_CFG	0x140 | 
 | #define HPET_T2_CMP	0x148 | 
 | #define HPET_T2_ROUTE	0x150 | 
 |  | 
 | #define HPET_ID_LEGSUP	0x00008000 | 
 | #define HPET_ID_NUMBER	0x00001f00 | 
 | #define HPET_ID_REV	0x000000ff | 
 | #define	HPET_ID_NUMBER_SHIFT	8 | 
 |  | 
 | #define HPET_CFG_ENABLE	0x001 | 
 | #define HPET_CFG_LEGACY	0x002 | 
 | #define	HPET_LEGACY_8254	2 | 
 | #define	HPET_LEGACY_RTC		8 | 
 |  | 
 | #define HPET_TN_ENABLE		0x004 | 
 | #define HPET_TN_PERIODIC	0x008 | 
 | #define HPET_TN_PERIODIC_CAP	0x010 | 
 | #define HPET_TN_SETVAL		0x040 | 
 | #define HPET_TN_32BIT		0x100 | 
 |  | 
 | /* Use our own asm for 64 bit multiply/divide */ | 
 | #define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) 			\ | 
 | 		__asm__ __volatile__("mull %2" 				\ | 
 | 				:"=a" (eax_out), "=d" (edx_out) 	\ | 
 | 				:"r" (reg_in), "0" (eax_in)) | 
 |  | 
 | #define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) 		\ | 
 | 		__asm__ __volatile__("divl %2" 				\ | 
 | 				:"=a" (eax_out), "=d" (edx_out) 	\ | 
 | 				:"r" (reg_in), "0" (eax_in), "1" (edx_in)) | 
 |  | 
 | #define KERNEL_TICK_USEC 	(1000000UL/HZ)	/* tick value in microsec */ | 
 | /* Max HPET Period is 10^8 femto sec as in HPET spec */ | 
 | #define HPET_MAX_PERIOD (100000000UL) | 
 | /* | 
 |  * Min HPET period is 10^5 femto sec just for safety. If it is less than this, | 
 |  * then 32 bit HPET counter wrapsaround in less than 0.5 sec. | 
 |  */ | 
 | #define HPET_MIN_PERIOD (100000UL) | 
 |  | 
 | extern unsigned long hpet_tick;  	/* hpet clks count per tick */ | 
 | extern unsigned long hpet_address;	/* hpet memory map physical address */ | 
 | extern int hpet_use_timer; | 
 |  | 
 | extern int hpet_rtc_timer_init(void); | 
 | extern int hpet_enable(void); | 
 | extern int hpet_reenable(void); | 
 | extern int is_hpet_enabled(void); | 
 | extern int is_hpet_capable(void); | 
 | extern int hpet_readl(unsigned long a); | 
 |  | 
 | #ifdef CONFIG_HPET_EMULATE_RTC | 
 | extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); | 
 | extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); | 
 | extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec); | 
 | extern int hpet_set_periodic_freq(unsigned long freq); | 
 | extern int hpet_rtc_dropped_irq(void); | 
 | extern int hpet_rtc_timer_init(void); | 
 | extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs); | 
 | #endif /* CONFIG_HPET_EMULATE_RTC */ | 
 | #endif /* CONFIG_HPET_TIMER */ | 
 | #endif /* _I386_HPET_H */ |