arch/alpha/lib/ev6-clear_user.S - linux/kernel/git/gregkh/tty - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * arch/alpha/lib/ev6-clear_user.S
  * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
  *
  * Zero user space, handling exceptions as we go.
  *
  * We have to make sure that $0 is always up-to-date and contains the
  * right "bytes left to zero" value (and that it is updated only _after_
  * a successful copy).  There is also some rather minor exception setup
  * stuff.
  *
  * Much of the information about 21264 scheduling/coding comes from:
  *	Compiler Writer's Guide for the Alpha 21264
  *	abbreviated as 'CWG' in other comments here
  *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
  * Scheduling notation:
  *	E	- either cluster
  *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  * Determining actual stalls (other than slotting) doesn't appear to be easy to do.
  * From perusing the source code context where this routine is called, it is
  * a fair assumption that significant fractions of entire pages are zeroed, so
  * it's going to be worth the effort to hand-unroll a big loop, and use wh64.
  * ASSUMPTION:
  *	The believed purpose of only updating $0 after a store is that a signal
  *	may come along during the execution of this chunk of code, and we don't
  *	want to leave a hole (and we also want to avoid repeating lots of work)
  */

 #include <asm/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
 	99: x,##y;			\
 	.section __ex_table,"a";	\
 	.long 99b - .;			\
 	lda $31, $exception-99b($31); 	\
 	.previous

 	.set noat
 	.set noreorder
 	.align 4

 	.globl __clear_user
 	.ent __clear_user
 	.frame	$30, 0, $26
 	.prologue 0

 				# Pipeline info : Slotting & Comments
 __clear_user:
 	and	$17, $17, $0
 	and	$16, 7, $4	# .. E  .. ..	: find dest head misalignment
 	beq	$0, $zerolength # U  .. .. ..	:  U L U L

 	addq	$0, $4, $1	# .. .. .. E	: bias counter
 	and	$1, 7, $2	# .. .. E  ..	: number of misaligned bytes in tail
 # Note - we never actually use $2, so this is a moot computation
 # and we can rewrite this later...
 	srl	$1, 3, $1	# .. E  .. ..	: number of quadwords to clear
 	beq	$4, $headalign	# U  .. .. ..	: U L U L

 /*
  * Head is not aligned.  Write (8 - $4) bytes to head of destination
  * This means $16 is known to be misaligned
  */
 	EX( ldq_u $5, 0($16) )	# .. .. .. L	: load dst word to mask back in
 	beq	$1, $onebyte	# .. .. U  ..	: sub-word store?
 	mskql	$5, $16, $5	# .. U  .. ..	: take care of misaligned head
 	addq	$16, 8, $16	# E  .. .. .. 	: L U U L

 	EX( stq_u $5, -8($16) )	# .. .. .. L	:
 	subq	$1, 1, $1	# .. .. E  ..	:
 	addq	$0, $4, $0	# .. E  .. ..	: bytes left -= 8 - misalignment
 	subq	$0, 8, $0	# E  .. .. ..	: U L U L

 	.align	4
 /*
  * (The .align directive ought to be a moot point)
  * values upon initial entry to the loop
  * $1 is number of quadwords to clear (zero is a valid value)
  * $2 is number of trailing bytes (0..7) ($2 never used...)
  * $16 is known to be aligned 0mod8
  */
 $headalign:
 	subq	$1, 16, $4	# .. .. .. E	: If < 16, we can not use the huge loop
 	and	$16, 0x3f, $2	# .. .. E  ..	: Forward work for huge loop
 	subq	$2, 0x40, $3	# .. E  .. ..	: bias counter (huge loop)
 	blt	$4, $trailquad	# U  .. .. ..	: U L U L

 /*
  * We know that we're going to do at least 16 quads, which means we are
  * going to be able to use the large block clear loop at least once.
  * Figure out how many quads we need to clear before we are 0mod64 aligned
  * so we can use the wh64 instruction.
  */

 	nop			# .. .. .. E
 	nop			# .. .. E  ..
 	nop			# .. E  .. ..
 	beq	$3, $bigalign	# U  .. .. ..	: U L U L : Aligned 0mod64

 $alignmod64:
 	EX( stq_u $31, 0($16) )	# .. .. .. L
 	addq	$3, 8, $3	# .. .. E  ..
 	subq	$0, 8, $0	# .. E  .. ..
 	nop			# E  .. .. ..	: U L U L

 	nop			# .. .. .. E
 	subq	$1, 1, $1	# .. .. E  ..
 	addq	$16, 8, $16	# .. E  .. ..
 	blt	$3, $alignmod64	# U  .. .. ..	: U L U L

 $bigalign:
 /*
  * $0 is the number of bytes left
  * $1 is the number of quads left
  * $16 is aligned 0mod64
  * we know that we'll be taking a minimum of one trip through
  * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
  * We are _not_ going to update $0 after every single store.  That
  * would be silly, because there will be cross-cluster dependencies
  * no matter how the code is scheduled.  By doing it in slightly
  * staggered fashion, we can still do this loop in 5 fetches
  * The worse case will be doing two extra quads in some future execution,
  * in the event of an interrupted clear.
  * Assumes the wh64 needs to be for 2 trips through the loop in the future
  * The wh64 is issued on for the starting destination address for trip +2
  * through the loop, and if there are less than two trips left, the target
  * address will be for the current trip.
  */
 	nop			# E :
 	nop			# E :
 	nop			# E :
 	bis	$16,$16,$3	# E : U L U L : Initial wh64 address is dest
 	/* This might actually help for the current trip... */

 $do_wh64:
 	wh64	($3)		# .. .. .. L1	: memory subsystem hint
 	subq	$1, 16, $4	# .. .. E  ..	: Forward calculation - repeat the loop?
 	EX( stq_u $31, 0($16) )	# .. L  .. ..
 	subq	$0, 8, $0	# E  .. .. ..	: U L U L

 	addq	$16, 128, $3	# E : Target address of wh64
 	EX( stq_u $31, 8($16) )	# L :
 	EX( stq_u $31, 16($16) )	# L :
 	subq	$0, 16, $0	# E : U L L U

 	nop			# E :
 	EX( stq_u $31, 24($16) )	# L :
 	EX( stq_u $31, 32($16) )	# L :
 	subq	$0, 168, $5	# E : U L L U : two trips through the loop left?
 	/* 168 = 192 - 24, since we've already completed some stores */

 	subq	$0, 16, $0	# E :
 	EX( stq_u $31, 40($16) )	# L :
 	EX( stq_u $31, 48($16) )	# L :
 	cmovlt	$5, $16, $3	# E : U L L U : Latency 2, extra mapping cycle

 	subq	$1, 8, $1	# E :
 	subq	$0, 16, $0	# E :
 	EX( stq_u $31, 56($16) )	# L :
 	nop			# E : U L U L

 	nop			# E :
 	subq	$0, 8, $0	# E :
 	addq	$16, 64, $16	# E :
 	bge	$4, $do_wh64	# U : U L U L

 $trailquad:
 	# zero to 16 quadwords left to store, plus any trailing bytes
 	# $1 is the number of quadwords left to go.
 	#
 	nop			# .. .. .. E
 	nop			# .. .. E  ..
 	nop			# .. E  .. ..
 	beq	$1, $trailbytes	# U  .. .. ..	: U L U L : Only 0..7 bytes to go

 $onequad:
 	EX( stq_u $31, 0($16) )	# .. .. .. L
 	subq	$1, 1, $1	# .. .. E  ..
 	subq	$0, 8, $0	# .. E  .. ..
 	nop			# E  .. .. ..	: U L U L

 	nop			# .. .. .. E
 	nop			# .. .. E  ..
 	addq	$16, 8, $16	# .. E  .. ..
 	bgt	$1, $onequad	# U  .. .. ..	: U L U L

 	# We have an unknown number of bytes left to go.
 $trailbytes:
 	nop			# .. .. .. E
 	nop			# .. .. E  ..
 	nop			# .. E  .. ..
 	beq	$0, $zerolength	# U  .. .. ..	: U L U L

 	# $0 contains the number of bytes left to copy (0..31)
 	# so we will use $0 as the loop counter
 	# We know for a fact that $0 > 0 zero due to previous context
 $onebyte:
 	EX( stb $31, 0($16) )	# .. .. .. L
 	subq	$0, 1, $0	# .. .. E  ..	:
 	addq	$16, 1, $16	# .. E  .. ..	:
 	bgt	$0, $onebyte	# U  .. .. ..	: U L U L

 $zerolength:
 $exception:			# Destination for exception recovery(?)
 	nop			# .. .. .. E	:
 	nop			# .. .. E  ..	:
 	nop			# .. E  .. ..	:
 	ret	$31, ($26), 1	# L0 .. .. ..	: L U L U
 	.end __clear_user
 	EXPORT_SYMBOL(__clear_user)
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* arch/alpha/lib/ev6-clear_user.S
	* 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
	*
	* Zero user space, handling exceptions as we go.
	*
	* We have to make sure that $0 is always up-to-date and contains the
	* right "bytes left to zero" value (and that it is updated only _after_
	* a successful copy). There is also some rather minor exception setup
	* stuff.
	*
	* Much of the information about 21264 scheduling/coding comes from:
	* Compiler Writer's Guide for the Alpha 21264
	* abbreviated as 'CWG' in other comments here
	* ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
	* Scheduling notation:
	* E - either cluster
	* U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1
	* L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1
	* Try not to change the actual algorithm if possible for consistency.
	* Determining actual stalls (other than slotting) doesn't appear to be easy to do.
	* From perusing the source code context where this routine is called, it is
	* a fair assumption that significant fractions of entire pages are zeroed, so
	* it's going to be worth the effort to hand-unroll a big loop, and use wh64.
	* ASSUMPTION:
	* The believed purpose of only updating $0 after a store is that a signal
	* may come along during the execution of this chunk of code, and we don't
	* want to leave a hole (and we also want to avoid repeating lots of work)
	*/

	#include <asm/export.h>
	/* Allow an exception for an insn; exit if we get one. */
	#define EX(x,y...) \
	99: x,##y; \
	.section __ex_table,"a"; \
	.long 99b - .; \
	lda $31, $exception-99b($31); \
	.previous

	.set noat
	.set noreorder
	.align 4

	.globl __clear_user
	.ent __clear_user
	.frame $30, 0, $26
	.prologue 0

	# Pipeline info : Slotting & Comments
	__clear_user:
	and $17, $17, $0
	and $16, 7, $4 # .. E .. .. : find dest head misalignment
	beq $0, $zerolength # U .. .. .. : U L U L

	addq $0, $4, $1 # .. .. .. E : bias counter
	and $1, 7, $2 # .. .. E .. : number of misaligned bytes in tail
	# Note - we never actually use $2, so this is a moot computation
	# and we can rewrite this later...
	srl $1, 3, $1 # .. E .. .. : number of quadwords to clear
	beq $4, $headalign # U .. .. .. : U L U L

	/*
	* Head is not aligned. Write (8 - $4) bytes to head of destination
	* This means $16 is known to be misaligned
	*/
	EX( ldq_u $5, 0($16) ) # .. .. .. L : load dst word to mask back in
	beq $1, $onebyte # .. .. U .. : sub-word store?
	mskql $5, $16, $5 # .. U .. .. : take care of misaligned head
	addq $16, 8, $16 # E .. .. .. : L U U L

	EX( stq_u $5, -8($16) ) # .. .. .. L :
	subq $1, 1, $1 # .. .. E .. :
	addq $0, $4, $0 # .. E .. .. : bytes left -= 8 - misalignment
	subq $0, 8, $0 # E .. .. .. : U L U L

	.align 4
	/*
	* (The .align directive ought to be a moot point)
	* values upon initial entry to the loop
	* $1 is number of quadwords to clear (zero is a valid value)
	* $2 is number of trailing bytes (0..7) ($2 never used...)
	* $16 is known to be aligned 0mod8
	*/
	$headalign:
	subq $1, 16, $4 # .. .. .. E : If < 16, we can not use the huge loop
	and $16, 0x3f, $2 # .. .. E .. : Forward work for huge loop
	subq $2, 0x40, $3 # .. E .. .. : bias counter (huge loop)
	blt $4, $trailquad # U .. .. .. : U L U L

	/*
	* We know that we're going to do at least 16 quads, which means we are
	* going to be able to use the large block clear loop at least once.
	* Figure out how many quads we need to clear before we are 0mod64 aligned
	* so we can use the wh64 instruction.
	*/

	nop # .. .. .. E
	nop # .. .. E ..
	nop # .. E .. ..
	beq $3, $bigalign # U .. .. .. : U L U L : Aligned 0mod64

	$alignmod64:
	EX( stq_u $31, 0($16) ) # .. .. .. L
	addq $3, 8, $3 # .. .. E ..
	subq $0, 8, $0 # .. E .. ..
	nop # E .. .. .. : U L U L

	nop # .. .. .. E
	subq $1, 1, $1 # .. .. E ..
	addq $16, 8, $16 # .. E .. ..
	blt $3, $alignmod64 # U .. .. .. : U L U L

	$bigalign:
	/*
	* $0 is the number of bytes left
	* $1 is the number of quads left
	* $16 is aligned 0mod64
	* we know that we'll be taking a minimum of one trip through
	* CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle
	* We are _not_ going to update $0 after every single store. That
	* would be silly, because there will be cross-cluster dependencies
	* no matter how the code is scheduled. By doing it in slightly
	* staggered fashion, we can still do this loop in 5 fetches
	* The worse case will be doing two extra quads in some future execution,
	* in the event of an interrupted clear.
	* Assumes the wh64 needs to be for 2 trips through the loop in the future
	* The wh64 is issued on for the starting destination address for trip +2
	* through the loop, and if there are less than two trips left, the target
	* address will be for the current trip.
	*/
	nop # E :
	nop # E :
	nop # E :
	bis $16,$16,$3 # E : U L U L : Initial wh64 address is dest
	/* This might actually help for the current trip... */

	$do_wh64:
	wh64 ($3) # .. .. .. L1 : memory subsystem hint
	subq $1, 16, $4 # .. .. E .. : Forward calculation - repeat the loop?
	EX( stq_u $31, 0($16) ) # .. L .. ..
	subq $0, 8, $0 # E .. .. .. : U L U L

	addq $16, 128, $3 # E : Target address of wh64
	EX( stq_u $31, 8($16) ) # L :
	EX( stq_u $31, 16($16) ) # L :
	subq $0, 16, $0 # E : U L L U

	nop # E :
	EX( stq_u $31, 24($16) ) # L :
	EX( stq_u $31, 32($16) ) # L :
	subq $0, 168, $5 # E : U L L U : two trips through the loop left?
	/* 168 = 192 - 24, since we've already completed some stores */

	subq $0, 16, $0 # E :
	EX( stq_u $31, 40($16) ) # L :
	EX( stq_u $31, 48($16) ) # L :
	cmovlt $5, $16, $3 # E : U L L U : Latency 2, extra mapping cycle

	subq $1, 8, $1 # E :
	subq $0, 16, $0 # E :
	EX( stq_u $31, 56($16) ) # L :
	nop # E : U L U L

	nop # E :
	subq $0, 8, $0 # E :
	addq $16, 64, $16 # E :
	bge $4, $do_wh64 # U : U L U L

	$trailquad:
	# zero to 16 quadwords left to store, plus any trailing bytes
	# $1 is the number of quadwords left to go.
	#
	nop # .. .. .. E
	nop # .. .. E ..
	nop # .. E .. ..
	beq $1, $trailbytes # U .. .. .. : U L U L : Only 0..7 bytes to go

	$onequad:
	EX( stq_u $31, 0($16) ) # .. .. .. L
	subq $1, 1, $1 # .. .. E ..
	subq $0, 8, $0 # .. E .. ..
	nop # E .. .. .. : U L U L

	nop # .. .. .. E
	nop # .. .. E ..
	addq $16, 8, $16 # .. E .. ..
	bgt $1, $onequad # U .. .. .. : U L U L

	# We have an unknown number of bytes left to go.
	$trailbytes:
	nop # .. .. .. E
	nop # .. .. E ..
	nop # .. E .. ..
	beq $0, $zerolength # U .. .. .. : U L U L

	# $0 contains the number of bytes left to copy (0..31)
	# so we will use $0 as the loop counter
	# We know for a fact that $0 > 0 zero due to previous context
	$onebyte:
	EX( stb $31, 0($16) ) # .. .. .. L
	subq $0, 1, $0 # .. .. E .. :
	addq $16, 1, $16 # .. E .. .. :
	bgt $0, $onebyte # U .. .. .. : U L U L

	$zerolength:
	$exception: # Destination for exception recovery(?)
	nop # .. .. .. E :
	nop # .. .. E .. :
	nop # .. E .. .. :
	ret $31, ($26), 1 # L0 .. .. .. : L U L U
	.end __clear_user
	EXPORT_SYMBOL(__clear_user)