|  | /* | 
|  | BlueZ - Bluetooth protocol stack for Linux | 
|  | Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved. | 
|  |  | 
|  | Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License version 2 as | 
|  | published by the Free Software Foundation; | 
|  |  | 
|  | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS | 
|  | OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. | 
|  | IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY | 
|  | CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES | 
|  | WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  |  | 
|  | ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, | 
|  | COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS | 
|  | SOFTWARE IS DISCLAIMED. | 
|  | */ | 
|  |  | 
|  | /* Bluetooth HCI event handling. */ | 
|  |  | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  | #include <net/bluetooth/mgmt.h> | 
|  |  | 
|  | #include "hci_request.h" | 
|  | #include "hci_debugfs.h" | 
|  | #include "a2mp.h" | 
|  | #include "amp.h" | 
|  | #include "smp.h" | 
|  |  | 
|  | #define ZERO_KEY "\x00\x00\x00\x00\x00\x00\x00\x00" \ | 
|  | "\x00\x00\x00\x00\x00\x00\x00\x00" | 
|  |  | 
|  | /* Handle HCI Event packets */ | 
|  |  | 
|  | static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | clear_bit(HCI_INQUIRY, &hdev->flags); | 
|  | smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */ | 
|  | wake_up_bit(&hdev->flags, HCI_INQUIRY); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | /* Set discovery state to stopped if we're not doing LE active | 
|  | * scanning. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) || | 
|  | hdev->le_scan_type != LE_SCAN_ACTIVE) | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | hci_conn_check_pending(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | hci_dev_set_flag(hdev, HCI_PERIODIC_INQ); | 
|  | } | 
|  |  | 
|  | static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ); | 
|  |  | 
|  | hci_conn_check_pending(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_remote_name_req_cancel(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | BT_DBG("%s", hdev->name); | 
|  | } | 
|  |  | 
|  | static void hci_cc_role_discovery(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_role_discovery *rp = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (conn) | 
|  | conn->role = rp->role; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_link_policy(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_link_policy *rp = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (conn) | 
|  | conn->link_policy = __le16_to_cpu(rp->policy); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_link_policy(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_write_link_policy *rp = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LINK_POLICY); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (conn) | 
|  | conn->link_policy = get_unaligned_le16(sent + 2); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_def_link_policy(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_def_link_policy *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->link_policy = __le16_to_cpu(rp->policy); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_def_link_policy(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_DEF_LINK_POLICY); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hdev->link_policy = get_unaligned_le16(sent); | 
|  | } | 
|  |  | 
|  | static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | clear_bit(HCI_RESET, &hdev->flags); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | /* Reset all non-persistent flags */ | 
|  | hci_dev_clear_volatile_flags(hdev); | 
|  |  | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  |  | 
|  | hdev->inq_tx_power = HCI_TX_POWER_INVALID; | 
|  | hdev->adv_tx_power = HCI_TX_POWER_INVALID; | 
|  |  | 
|  | memset(hdev->adv_data, 0, sizeof(hdev->adv_data)); | 
|  | hdev->adv_data_len = 0; | 
|  |  | 
|  | memset(hdev->scan_rsp_data, 0, sizeof(hdev->scan_rsp_data)); | 
|  | hdev->scan_rsp_data_len = 0; | 
|  |  | 
|  | hdev->le_scan_type = LE_SCAN_PASSIVE; | 
|  |  | 
|  | hdev->ssp_debug_mode = 0; | 
|  |  | 
|  | hci_bdaddr_list_clear(&hdev->le_white_list); | 
|  | hci_bdaddr_list_clear(&hdev->le_resolv_list); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_stored_link_key(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_stored_link_key *rp = (void *)skb->data; | 
|  | struct hci_cp_read_stored_link_key *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_READ_STORED_LINK_KEY); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | if (!rp->status && sent->read_all == 0x01) { | 
|  | hdev->stored_max_keys = rp->max_keys; | 
|  | hdev->stored_num_keys = rp->num_keys; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_cc_delete_stored_link_key(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_delete_stored_link_key *rp = (void *)skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (rp->num_keys <= hdev->stored_num_keys) | 
|  | hdev->stored_num_keys -= rp->num_keys; | 
|  | else | 
|  | hdev->stored_num_keys = 0; | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LOCAL_NAME); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_set_local_name_complete(hdev, sent, status); | 
|  | else if (!status) | 
|  | memcpy(hdev->dev_name, sent, HCI_MAX_NAME_LENGTH); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_name *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP) || | 
|  | hci_dev_test_flag(hdev, HCI_CONFIG)) | 
|  | memcpy(hdev->dev_name, rp->name, HCI_MAX_NAME_LENGTH); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_AUTH_ENABLE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!status) { | 
|  | __u8 param = *((__u8 *) sent); | 
|  |  | 
|  | if (param == AUTH_ENABLED) | 
|  | set_bit(HCI_AUTH, &hdev->flags); | 
|  | else | 
|  | clear_bit(HCI_AUTH, &hdev->flags); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_auth_enable_complete(hdev, status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | __u8 param; | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_ENCRYPT_MODE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | param = *((__u8 *) sent); | 
|  |  | 
|  | if (param) | 
|  | set_bit(HCI_ENCRYPT, &hdev->flags); | 
|  | else | 
|  | clear_bit(HCI_ENCRYPT, &hdev->flags); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | __u8 param; | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SCAN_ENABLE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | param = *((__u8 *) sent); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (status) { | 
|  | hdev->discov_timeout = 0; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (param & SCAN_INQUIRY) | 
|  | set_bit(HCI_ISCAN, &hdev->flags); | 
|  | else | 
|  | clear_bit(HCI_ISCAN, &hdev->flags); | 
|  |  | 
|  | if (param & SCAN_PAGE) | 
|  | set_bit(HCI_PSCAN, &hdev->flags); | 
|  | else | 
|  | clear_bit(HCI_PSCAN, &hdev->flags); | 
|  |  | 
|  | done: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_class_of_dev *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | memcpy(hdev->dev_class, rp->dev_class, 3); | 
|  |  | 
|  | BT_DBG("%s class 0x%.2x%.2x%.2x", hdev->name, | 
|  | hdev->dev_class[2], hdev->dev_class[1], hdev->dev_class[0]); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_CLASS_OF_DEV); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (status == 0) | 
|  | memcpy(hdev->dev_class, sent, 3); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_set_class_of_dev_complete(hdev, sent, status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_voice_setting(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_voice_setting *rp = (void *) skb->data; | 
|  | __u16 setting; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | setting = __le16_to_cpu(rp->voice_setting); | 
|  |  | 
|  | if (hdev->voice_setting == setting) | 
|  | return; | 
|  |  | 
|  | hdev->voice_setting = setting; | 
|  |  | 
|  | BT_DBG("%s voice setting 0x%4.4x", hdev->name, setting); | 
|  |  | 
|  | if (hdev->notify) | 
|  | hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_voice_setting(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | __u16 setting; | 
|  | void *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_VOICE_SETTING); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | setting = get_unaligned_le16(sent); | 
|  |  | 
|  | if (hdev->voice_setting == setting) | 
|  | return; | 
|  |  | 
|  | hdev->voice_setting = setting; | 
|  |  | 
|  | BT_DBG("%s voice setting 0x%4.4x", hdev->name, setting); | 
|  |  | 
|  | if (hdev->notify) | 
|  | hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_num_supported_iac(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_num_supported_iac *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->num_iac = rp->num_iac; | 
|  |  | 
|  | BT_DBG("%s num iac %d", hdev->name, hdev->num_iac); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_ssp_mode(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | struct hci_cp_write_ssp_mode *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SSP_MODE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!status) { | 
|  | if (sent->mode) | 
|  | hdev->features[1][0] |= LMP_HOST_SSP; | 
|  | else | 
|  | hdev->features[1][0] &= ~LMP_HOST_SSP; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_ssp_enable_complete(hdev, sent->mode, status); | 
|  | else if (!status) { | 
|  | if (sent->mode) | 
|  | hci_dev_set_flag(hdev, HCI_SSP_ENABLED); | 
|  | else | 
|  | hci_dev_clear_flag(hdev, HCI_SSP_ENABLED); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_sc_support(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | u8 status = *((u8 *) skb->data); | 
|  | struct hci_cp_write_sc_support *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SC_SUPPORT); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!status) { | 
|  | if (sent->support) | 
|  | hdev->features[1][0] |= LMP_HOST_SC; | 
|  | else | 
|  | hdev->features[1][0] &= ~LMP_HOST_SC; | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT) && !status) { | 
|  | if (sent->support) | 
|  | hci_dev_set_flag(hdev, HCI_SC_ENABLED); | 
|  | else | 
|  | hci_dev_clear_flag(hdev, HCI_SC_ENABLED); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_version(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_version *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP) || | 
|  | hci_dev_test_flag(hdev, HCI_CONFIG)) { | 
|  | hdev->hci_ver = rp->hci_ver; | 
|  | hdev->hci_rev = __le16_to_cpu(rp->hci_rev); | 
|  | hdev->lmp_ver = rp->lmp_ver; | 
|  | hdev->manufacturer = __le16_to_cpu(rp->manufacturer); | 
|  | hdev->lmp_subver = __le16_to_cpu(rp->lmp_subver); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_commands(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_commands *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP) || | 
|  | hci_dev_test_flag(hdev, HCI_CONFIG)) | 
|  | memcpy(hdev->commands, rp->commands, sizeof(hdev->commands)); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_features(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_features *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | memcpy(hdev->features, rp->features, 8); | 
|  |  | 
|  | /* Adjust default settings according to features | 
|  | * supported by device. */ | 
|  |  | 
|  | if (hdev->features[0][0] & LMP_3SLOT) | 
|  | hdev->pkt_type |= (HCI_DM3 | HCI_DH3); | 
|  |  | 
|  | if (hdev->features[0][0] & LMP_5SLOT) | 
|  | hdev->pkt_type |= (HCI_DM5 | HCI_DH5); | 
|  |  | 
|  | if (hdev->features[0][1] & LMP_HV2) { | 
|  | hdev->pkt_type  |= (HCI_HV2); | 
|  | hdev->esco_type |= (ESCO_HV2); | 
|  | } | 
|  |  | 
|  | if (hdev->features[0][1] & LMP_HV3) { | 
|  | hdev->pkt_type  |= (HCI_HV3); | 
|  | hdev->esco_type |= (ESCO_HV3); | 
|  | } | 
|  |  | 
|  | if (lmp_esco_capable(hdev)) | 
|  | hdev->esco_type |= (ESCO_EV3); | 
|  |  | 
|  | if (hdev->features[0][4] & LMP_EV4) | 
|  | hdev->esco_type |= (ESCO_EV4); | 
|  |  | 
|  | if (hdev->features[0][4] & LMP_EV5) | 
|  | hdev->esco_type |= (ESCO_EV5); | 
|  |  | 
|  | if (hdev->features[0][5] & LMP_EDR_ESCO_2M) | 
|  | hdev->esco_type |= (ESCO_2EV3); | 
|  |  | 
|  | if (hdev->features[0][5] & LMP_EDR_ESCO_3M) | 
|  | hdev->esco_type |= (ESCO_3EV3); | 
|  |  | 
|  | if (hdev->features[0][5] & LMP_EDR_3S_ESCO) | 
|  | hdev->esco_type |= (ESCO_2EV5 | ESCO_3EV5); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_ext_features(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_ext_features *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (hdev->max_page < rp->max_page) | 
|  | hdev->max_page = rp->max_page; | 
|  |  | 
|  | if (rp->page < HCI_MAX_PAGES) | 
|  | memcpy(hdev->features[rp->page], rp->features, 8); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_flow_control_mode(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_flow_control_mode *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->flow_ctl_mode = rp->mode; | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_buffer_size *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->acl_mtu  = __le16_to_cpu(rp->acl_mtu); | 
|  | hdev->sco_mtu  = rp->sco_mtu; | 
|  | hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt); | 
|  | hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt); | 
|  |  | 
|  | if (test_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks)) { | 
|  | hdev->sco_mtu  = 64; | 
|  | hdev->sco_pkts = 8; | 
|  | } | 
|  |  | 
|  | hdev->acl_cnt = hdev->acl_pkts; | 
|  | hdev->sco_cnt = hdev->sco_pkts; | 
|  |  | 
|  | BT_DBG("%s acl mtu %d:%d sco mtu %d:%d", hdev->name, hdev->acl_mtu, | 
|  | hdev->acl_pkts, hdev->sco_mtu, hdev->sco_pkts); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_bd_addr *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (test_bit(HCI_INIT, &hdev->flags)) | 
|  | bacpy(&hdev->bdaddr, &rp->bdaddr); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP)) | 
|  | bacpy(&hdev->setup_addr, &rp->bdaddr); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_page_scan_activity(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_page_scan_activity *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (test_bit(HCI_INIT, &hdev->flags)) { | 
|  | hdev->page_scan_interval = __le16_to_cpu(rp->interval); | 
|  | hdev->page_scan_window = __le16_to_cpu(rp->window); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_page_scan_activity(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | u8 status = *((u8 *) skb->data); | 
|  | struct hci_cp_write_page_scan_activity *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_PAGE_SCAN_ACTIVITY); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hdev->page_scan_interval = __le16_to_cpu(sent->interval); | 
|  | hdev->page_scan_window = __le16_to_cpu(sent->window); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_page_scan_type(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_page_scan_type *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | if (test_bit(HCI_INIT, &hdev->flags)) | 
|  | hdev->page_scan_type = rp->type; | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_page_scan_type(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | u8 status = *((u8 *) skb->data); | 
|  | u8 *type; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | type = hci_sent_cmd_data(hdev, HCI_OP_WRITE_PAGE_SCAN_TYPE); | 
|  | if (type) | 
|  | hdev->page_scan_type = *type; | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_data_block_size(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_data_block_size *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->block_mtu = __le16_to_cpu(rp->max_acl_len); | 
|  | hdev->block_len = __le16_to_cpu(rp->block_len); | 
|  | hdev->num_blocks = __le16_to_cpu(rp->num_blocks); | 
|  |  | 
|  | hdev->block_cnt = hdev->num_blocks; | 
|  |  | 
|  | BT_DBG("%s blk mtu %d cnt %d len %d", hdev->name, hdev->block_mtu, | 
|  | hdev->block_cnt, hdev->block_len); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_clock(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_clock *rp = (void *) skb->data; | 
|  | struct hci_cp_read_clock *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (skb->len < sizeof(*rp)) | 
|  | return; | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_READ_CLOCK); | 
|  | if (!cp) | 
|  | goto unlock; | 
|  |  | 
|  | if (cp->which == 0x00) { | 
|  | hdev->clock = le32_to_cpu(rp->clock); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (conn) { | 
|  | conn->clock = le32_to_cpu(rp->clock); | 
|  | conn->clock_accuracy = le16_to_cpu(rp->accuracy); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_amp_info(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_amp_info *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->amp_status = rp->amp_status; | 
|  | hdev->amp_total_bw = __le32_to_cpu(rp->total_bw); | 
|  | hdev->amp_max_bw = __le32_to_cpu(rp->max_bw); | 
|  | hdev->amp_min_latency = __le32_to_cpu(rp->min_latency); | 
|  | hdev->amp_max_pdu = __le32_to_cpu(rp->max_pdu); | 
|  | hdev->amp_type = rp->amp_type; | 
|  | hdev->amp_pal_cap = __le16_to_cpu(rp->pal_cap); | 
|  | hdev->amp_assoc_size = __le16_to_cpu(rp->max_assoc_size); | 
|  | hdev->amp_be_flush_to = __le32_to_cpu(rp->be_flush_to); | 
|  | hdev->amp_max_flush_to = __le32_to_cpu(rp->max_flush_to); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_inq_rsp_tx_power(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_inq_rsp_tx_power *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->inq_tx_power = rp->tx_power; | 
|  | } | 
|  |  | 
|  | static void hci_cc_pin_code_reply(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_pin_code_reply *rp = (void *) skb->data; | 
|  | struct hci_cp_pin_code_reply *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_pin_code_reply_complete(hdev, &rp->bdaddr, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | goto unlock; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_PIN_CODE_REPLY); | 
|  | if (!cp) | 
|  | goto unlock; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr); | 
|  | if (conn) | 
|  | conn->pin_length = cp->pin_len; | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_pin_code_neg_reply(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_pin_code_neg_reply *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_pin_code_neg_reply_complete(hdev, &rp->bdaddr, | 
|  | rp->status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_buffer_size(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_buffer_size *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_mtu = __le16_to_cpu(rp->le_mtu); | 
|  | hdev->le_pkts = rp->le_max_pkt; | 
|  |  | 
|  | hdev->le_cnt = hdev->le_pkts; | 
|  |  | 
|  | BT_DBG("%s le mtu %d:%d", hdev->name, hdev->le_mtu, hdev->le_pkts); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_local_features(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_local_features *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | memcpy(hdev->le_features, rp->features, 8); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_adv_tx_power(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_adv_tx_power *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->adv_tx_power = rp->tx_power; | 
|  | } | 
|  |  | 
|  | static void hci_cc_user_confirm_reply(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_user_confirm_reply *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_confirm_reply_complete(hdev, &rp->bdaddr, ACL_LINK, 0, | 
|  | rp->status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_user_confirm_neg_reply(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_user_confirm_reply *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_confirm_neg_reply_complete(hdev, &rp->bdaddr, | 
|  | ACL_LINK, 0, rp->status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_user_passkey_reply(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_user_confirm_reply *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_passkey_reply_complete(hdev, &rp->bdaddr, ACL_LINK, | 
|  | 0, rp->status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_user_passkey_neg_reply(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_user_confirm_reply *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_passkey_neg_reply_complete(hdev, &rp->bdaddr, | 
|  | ACL_LINK, 0, rp->status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_oob_data(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_oob_data *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_local_oob_ext_data(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_local_oob_ext_data *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_random_addr(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | bdaddr_t *sent; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_RANDOM_ADDR); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | bacpy(&hdev->random_addr, sent); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_default_phy(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | struct hci_cp_le_set_default_phy *cp; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_DEFAULT_PHY); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hdev->le_tx_def_phys = cp->tx_phys; | 
|  | hdev->le_rx_def_phys = cp->rx_phys; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_adv_set_random_addr(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | struct hci_cp_le_set_adv_set_rand_addr *cp; | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_SET_RAND_ADDR); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!hdev->cur_adv_instance) { | 
|  | /* Store in hdev for instance 0 (Set adv and Directed advs) */ | 
|  | bacpy(&hdev->random_addr, &cp->bdaddr); | 
|  | } else { | 
|  | adv_instance = hci_find_adv_instance(hdev, | 
|  | hdev->cur_adv_instance); | 
|  | if (adv_instance) | 
|  | bacpy(&adv_instance->random_addr, &cp->bdaddr); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 *sent, status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_ENABLE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | /* If we're doing connection initiation as peripheral. Set a | 
|  | * timeout in case something goes wrong. | 
|  | */ | 
|  | if (*sent) { | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | hci_dev_set_flag(hdev, HCI_LE_ADV); | 
|  |  | 
|  | conn = hci_lookup_le_connect(hdev); | 
|  | if (conn) | 
|  | queue_delayed_work(hdev->workqueue, | 
|  | &conn->le_conn_timeout, | 
|  | conn->conn_timeout); | 
|  | } else { | 
|  | hci_dev_clear_flag(hdev, HCI_LE_ADV); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_ext_adv_enable(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_ext_adv_enable *cp; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (cp->enable) { | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | hci_dev_set_flag(hdev, HCI_LE_ADV); | 
|  |  | 
|  | conn = hci_lookup_le_connect(hdev); | 
|  | if (conn) | 
|  | queue_delayed_work(hdev->workqueue, | 
|  | &conn->le_conn_timeout, | 
|  | conn->conn_timeout); | 
|  | } else { | 
|  | hci_dev_clear_flag(hdev, HCI_LE_ADV); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_scan_param(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_scan_param *cp; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_PARAM); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hdev->le_scan_type = cp->type; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_ext_scan_param(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_ext_scan_params *cp; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | struct hci_cp_le_scan_phy_params *phy_param; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_SCAN_PARAMS); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | phy_param = (void *)cp->data; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hdev->le_scan_type = phy_param->type; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static bool has_pending_adv_report(struct hci_dev *hdev) | 
|  | { | 
|  | struct discovery_state *d = &hdev->discovery; | 
|  |  | 
|  | return bacmp(&d->last_adv_addr, BDADDR_ANY); | 
|  | } | 
|  |  | 
|  | static void clear_pending_adv_report(struct hci_dev *hdev) | 
|  | { | 
|  | struct discovery_state *d = &hdev->discovery; | 
|  |  | 
|  | bacpy(&d->last_adv_addr, BDADDR_ANY); | 
|  | d->last_adv_data_len = 0; | 
|  | } | 
|  |  | 
|  | static void store_pending_adv_report(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 bdaddr_type, s8 rssi, u32 flags, | 
|  | u8 *data, u8 len) | 
|  | { | 
|  | struct discovery_state *d = &hdev->discovery; | 
|  |  | 
|  | bacpy(&d->last_adv_addr, bdaddr); | 
|  | d->last_adv_addr_type = bdaddr_type; | 
|  | d->last_adv_rssi = rssi; | 
|  | d->last_adv_flags = flags; | 
|  | memcpy(d->last_adv_data, data, len); | 
|  | d->last_adv_data_len = len; | 
|  | } | 
|  |  | 
|  | static void le_set_scan_enable_complete(struct hci_dev *hdev, u8 enable) | 
|  | { | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | switch (enable) { | 
|  | case LE_SCAN_ENABLE: | 
|  | hci_dev_set_flag(hdev, HCI_LE_SCAN); | 
|  | if (hdev->le_scan_type == LE_SCAN_ACTIVE) | 
|  | clear_pending_adv_report(hdev); | 
|  | break; | 
|  |  | 
|  | case LE_SCAN_DISABLE: | 
|  | /* We do this here instead of when setting DISCOVERY_STOPPED | 
|  | * since the latter would potentially require waiting for | 
|  | * inquiry to stop too. | 
|  | */ | 
|  | if (has_pending_adv_report(hdev)) { | 
|  | struct discovery_state *d = &hdev->discovery; | 
|  |  | 
|  | mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, | 
|  | d->last_adv_addr_type, NULL, | 
|  | d->last_adv_rssi, d->last_adv_flags, | 
|  | d->last_adv_data, | 
|  | d->last_adv_data_len, NULL, 0); | 
|  | } | 
|  |  | 
|  | /* Cancel this timer so that we don't try to disable scanning | 
|  | * when it's already disabled. | 
|  | */ | 
|  | cancel_delayed_work(&hdev->le_scan_disable); | 
|  |  | 
|  | hci_dev_clear_flag(hdev, HCI_LE_SCAN); | 
|  |  | 
|  | /* The HCI_LE_SCAN_INTERRUPTED flag indicates that we | 
|  | * interrupted scanning due to a connect request. Mark | 
|  | * therefore discovery as stopped. If this was not | 
|  | * because of a connect request advertising might have | 
|  | * been disabled because of active scanning, so | 
|  | * re-enable it again if necessary. | 
|  | */ | 
|  | if (hci_dev_test_and_clear_flag(hdev, HCI_LE_SCAN_INTERRUPTED)) | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  | else if (!hci_dev_test_flag(hdev, HCI_LE_ADV) && | 
|  | hdev->discovery.state == DISCOVERY_FINDING) | 
|  | hci_req_reenable_advertising(hdev); | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | bt_dev_err(hdev, "use of reserved LE_Scan_Enable param %d", | 
|  | enable); | 
|  | break; | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_scan_enable(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_scan_enable *cp; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_ENABLE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | le_set_scan_enable_complete(hdev, cp->enable); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_ext_scan_enable(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_ext_scan_enable *cp; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_SCAN_ENABLE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | le_set_scan_enable_complete(hdev, cp->enable); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_num_adv_sets(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_num_supported_adv_sets *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x No of Adv sets %u", hdev->name, rp->status, | 
|  | rp->num_of_sets); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_num_of_adv_sets = rp->num_of_sets; | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_white_list_size(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_white_list_size *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x size %u", hdev->name, rp->status, rp->size); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_white_list_size = rp->size; | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_clear_white_list(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | hci_bdaddr_list_clear(&hdev->le_white_list); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_add_to_white_list(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_add_to_white_list *sent; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_ADD_TO_WHITE_LIST); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_bdaddr_list_add(&hdev->le_white_list, &sent->bdaddr, | 
|  | sent->bdaddr_type); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_del_from_white_list(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_del_from_white_list *sent; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_DEL_FROM_WHITE_LIST); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_bdaddr_list_del(&hdev->le_white_list, &sent->bdaddr, | 
|  | sent->bdaddr_type); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_supported_states(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_supported_states *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | memcpy(hdev->le_states, rp->le_states, 8); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_def_data_len(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_def_data_len *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_def_tx_len = le16_to_cpu(rp->tx_len); | 
|  | hdev->le_def_tx_time = le16_to_cpu(rp->tx_time); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_write_def_data_len(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_write_def_data_len *sent; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_WRITE_DEF_DATA_LEN); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hdev->le_def_tx_len = le16_to_cpu(sent->tx_len); | 
|  | hdev->le_def_tx_time = le16_to_cpu(sent->tx_time); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_clear_resolv_list(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | hci_bdaddr_list_clear(&hdev->le_resolv_list); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_resolv_list_size(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_resolv_list_size *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x size %u", hdev->name, rp->status, rp->size); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_resolv_list_size = rp->size; | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_set_addr_resolution_enable(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | __u8 *sent, status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (*sent) | 
|  | hci_dev_set_flag(hdev, HCI_LL_RPA_RESOLUTION); | 
|  | else | 
|  | hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_le_read_max_data_len(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_read_max_data_len *rp = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hdev->le_max_tx_len = le16_to_cpu(rp->tx_len); | 
|  | hdev->le_max_tx_time = le16_to_cpu(rp->tx_time); | 
|  | hdev->le_max_rx_len = le16_to_cpu(rp->rx_len); | 
|  | hdev->le_max_rx_time = le16_to_cpu(rp->rx_time); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_le_host_supported(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_write_le_host_supported *sent; | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (sent->le) { | 
|  | hdev->features[1][0] |= LMP_HOST_LE; | 
|  | hci_dev_set_flag(hdev, HCI_LE_ENABLED); | 
|  | } else { | 
|  | hdev->features[1][0] &= ~LMP_HOST_LE; | 
|  | hci_dev_clear_flag(hdev, HCI_LE_ENABLED); | 
|  | hci_dev_clear_flag(hdev, HCI_ADVERTISING); | 
|  | } | 
|  |  | 
|  | if (sent->simul) | 
|  | hdev->features[1][0] |= LMP_HOST_LE_BREDR; | 
|  | else | 
|  | hdev->features[1][0] &= ~LMP_HOST_LE_BREDR; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_set_adv_param(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_le_set_adv_param *cp; | 
|  | u8 status = *((u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_PARAM); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | hdev->adv_addr_type = cp->own_address_type; | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_set_ext_adv_param(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_le_set_ext_adv_params *rp = (void *) skb->data; | 
|  | struct hci_cp_le_set_ext_adv_params *cp; | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | hdev->adv_addr_type = cp->own_addr_type; | 
|  | if (!hdev->cur_adv_instance) { | 
|  | /* Store in hdev for instance 0 */ | 
|  | hdev->adv_tx_power = rp->tx_power; | 
|  | } else { | 
|  | adv_instance = hci_find_adv_instance(hdev, | 
|  | hdev->cur_adv_instance); | 
|  | if (adv_instance) | 
|  | adv_instance->tx_power = rp->tx_power; | 
|  | } | 
|  | /* Update adv data as tx power is known now */ | 
|  | hci_req_update_adv_data(hdev, hdev->cur_adv_instance); | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_rssi(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_rp_read_rssi *rp = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (conn) | 
|  | conn->rssi = rp->rssi; | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_read_tx_power(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_cp_read_tx_power *sent; | 
|  | struct hci_rp_read_tx_power *rp = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); | 
|  |  | 
|  | if (rp->status) | 
|  | return; | 
|  |  | 
|  | sent = hci_sent_cmd_data(hdev, HCI_OP_READ_TX_POWER); | 
|  | if (!sent) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | switch (sent->type) { | 
|  | case 0x00: | 
|  | conn->tx_power = rp->tx_power; | 
|  | break; | 
|  | case 0x01: | 
|  | conn->max_tx_power = rp->tx_power; | 
|  | break; | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cc_write_ssp_debug_mode(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | u8 status = *((u8 *) skb->data); | 
|  | u8 *mode; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | mode = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SSP_DEBUG_MODE); | 
|  | if (mode) | 
|  | hdev->ssp_debug_mode = *mode; | 
|  | } | 
|  |  | 
|  | static void hci_cs_inquiry(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (status) { | 
|  | hci_conn_check_pending(hdev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | set_bit(HCI_INQUIRY, &hdev->flags); | 
|  | } | 
|  |  | 
|  | static void hci_cs_create_conn(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_create_conn *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_CONN); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr); | 
|  |  | 
|  | BT_DBG("%s bdaddr %pMR hcon %p", hdev->name, &cp->bdaddr, conn); | 
|  |  | 
|  | if (status) { | 
|  | if (conn && conn->state == BT_CONNECT) { | 
|  | if (status != 0x0c || conn->attempt > 2) { | 
|  | conn->state = BT_CLOSED; | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_del(conn); | 
|  | } else | 
|  | conn->state = BT_CONNECT2; | 
|  | } | 
|  | } else { | 
|  | if (!conn) { | 
|  | conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr, | 
|  | HCI_ROLE_MASTER); | 
|  | if (!conn) | 
|  | bt_dev_err(hdev, "no memory for new connection"); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_add_sco(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_add_sco *cp; | 
|  | struct hci_conn *acl, *sco; | 
|  | __u16 handle; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_ADD_SCO); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | handle = __le16_to_cpu(cp->handle); | 
|  |  | 
|  | BT_DBG("%s handle 0x%4.4x", hdev->name, handle); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | acl = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | if (acl) { | 
|  | sco = acl->link; | 
|  | if (sco) { | 
|  | sco->state = BT_CLOSED; | 
|  |  | 
|  | hci_connect_cfm(sco, status); | 
|  | hci_conn_del(sco); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_auth_requested(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_auth_requested *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_AUTH_REQUESTED); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | if (conn->state == BT_CONFIG) { | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_set_conn_encrypt(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_set_conn_encrypt *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_SET_CONN_ENCRYPT); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | if (conn->state == BT_CONFIG) { | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static int hci_outgoing_auth_needed(struct hci_dev *hdev, | 
|  | struct hci_conn *conn) | 
|  | { | 
|  | if (conn->state != BT_CONFIG || !conn->out) | 
|  | return 0; | 
|  |  | 
|  | if (conn->pending_sec_level == BT_SECURITY_SDP) | 
|  | return 0; | 
|  |  | 
|  | /* Only request authentication for SSP connections or non-SSP | 
|  | * devices with sec_level MEDIUM or HIGH or if MITM protection | 
|  | * is requested. | 
|  | */ | 
|  | if (!hci_conn_ssp_enabled(conn) && !(conn->auth_type & 0x01) && | 
|  | conn->pending_sec_level != BT_SECURITY_FIPS && | 
|  | conn->pending_sec_level != BT_SECURITY_HIGH && | 
|  | conn->pending_sec_level != BT_SECURITY_MEDIUM) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int hci_resolve_name(struct hci_dev *hdev, | 
|  | struct inquiry_entry *e) | 
|  | { | 
|  | struct hci_cp_remote_name_req cp; | 
|  |  | 
|  | memset(&cp, 0, sizeof(cp)); | 
|  |  | 
|  | bacpy(&cp.bdaddr, &e->data.bdaddr); | 
|  | cp.pscan_rep_mode = e->data.pscan_rep_mode; | 
|  | cp.pscan_mode = e->data.pscan_mode; | 
|  | cp.clock_offset = e->data.clock_offset; | 
|  |  | 
|  | return hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | static bool hci_resolve_next_name(struct hci_dev *hdev) | 
|  | { | 
|  | struct discovery_state *discov = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | if (list_empty(&discov->resolve)) | 
|  | return false; | 
|  |  | 
|  | e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED); | 
|  | if (!e) | 
|  | return false; | 
|  |  | 
|  | if (hci_resolve_name(hdev, e) == 0) { | 
|  | e->name_state = NAME_PENDING; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn, | 
|  | bdaddr_t *bdaddr, u8 *name, u8 name_len) | 
|  | { | 
|  | struct discovery_state *discov = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | /* Update the mgmt connected state if necessary. Be careful with | 
|  | * conn objects that exist but are not (yet) connected however. | 
|  | * Only those in BT_CONFIG or BT_CONNECTED states can be | 
|  | * considered connected. | 
|  | */ | 
|  | if (conn && | 
|  | (conn->state == BT_CONFIG || conn->state == BT_CONNECTED) && | 
|  | !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) | 
|  | mgmt_device_connected(hdev, conn, 0, name, name_len); | 
|  |  | 
|  | if (discov->state == DISCOVERY_STOPPED) | 
|  | return; | 
|  |  | 
|  | if (discov->state == DISCOVERY_STOPPING) | 
|  | goto discov_complete; | 
|  |  | 
|  | if (discov->state != DISCOVERY_RESOLVING) | 
|  | return; | 
|  |  | 
|  | e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING); | 
|  | /* If the device was not found in a list of found devices names of which | 
|  | * are pending. there is no need to continue resolving a next name as it | 
|  | * will be done upon receiving another Remote Name Request Complete | 
|  | * Event */ | 
|  | if (!e) | 
|  | return; | 
|  |  | 
|  | list_del(&e->list); | 
|  | if (name) { | 
|  | e->name_state = NAME_KNOWN; | 
|  | mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, | 
|  | e->data.rssi, name, name_len); | 
|  | } else { | 
|  | e->name_state = NAME_NOT_KNOWN; | 
|  | } | 
|  |  | 
|  | if (hci_resolve_next_name(hdev)) | 
|  | return; | 
|  |  | 
|  | discov_complete: | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  | } | 
|  |  | 
|  | static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_remote_name_req *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | /* If successful wait for the name req complete event before | 
|  | * checking for the need to do authentication */ | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_REMOTE_NAME_REQ); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | hci_check_pending_name(hdev, conn, &cp->bdaddr, NULL, 0); | 
|  |  | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (!hci_outgoing_auth_needed(hdev, conn)) | 
|  | goto unlock; | 
|  |  | 
|  | if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) { | 
|  | struct hci_cp_auth_requested auth_cp; | 
|  |  | 
|  | set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags); | 
|  |  | 
|  | auth_cp.handle = __cpu_to_le16(conn->handle); | 
|  | hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, | 
|  | sizeof(auth_cp), &auth_cp); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_read_remote_features(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_read_remote_features *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_FEATURES); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | if (conn->state == BT_CONFIG) { | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_read_remote_ext_features(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_read_remote_ext_features *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | if (conn->state == BT_CONFIG) { | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_setup_sync_conn *cp; | 
|  | struct hci_conn *acl, *sco; | 
|  | __u16 handle; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_SETUP_SYNC_CONN); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | handle = __le16_to_cpu(cp->handle); | 
|  |  | 
|  | BT_DBG("%s handle 0x%4.4x", hdev->name, handle); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | acl = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | if (acl) { | 
|  | sco = acl->link; | 
|  | if (sco) { | 
|  | sco->state = BT_CLOSED; | 
|  |  | 
|  | hci_connect_cfm(sco, status); | 
|  | hci_conn_del(sco); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_sniff_mode *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_SNIFF_MODE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags); | 
|  |  | 
|  | if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags)) | 
|  | hci_sco_setup(conn, status); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status) | 
|  | { | 
|  | struct hci_cp_exit_sniff_mode *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_EXIT_SNIFF_MODE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags); | 
|  |  | 
|  | if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags)) | 
|  | hci_sco_setup(conn, status); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_disconnect(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_disconnect *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_DISCONNECT); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) | 
|  | mgmt_disconnect_failed(hdev, &conn->dst, conn->type, | 
|  | conn->dst_type, status); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void cs_le_create_conn(struct hci_dev *hdev, bdaddr_t *peer_addr, | 
|  | u8 peer_addr_type, u8 own_address_type, | 
|  | u8 filter_policy) | 
|  | { | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_le(hdev, peer_addr, | 
|  | peer_addr_type); | 
|  | if (!conn) | 
|  | return; | 
|  |  | 
|  | /* Store the initiator and responder address information which | 
|  | * is needed for SMP. These values will not change during the | 
|  | * lifetime of the connection. | 
|  | */ | 
|  | conn->init_addr_type = own_address_type; | 
|  | if (own_address_type == ADDR_LE_DEV_RANDOM) | 
|  | bacpy(&conn->init_addr, &hdev->random_addr); | 
|  | else | 
|  | bacpy(&conn->init_addr, &hdev->bdaddr); | 
|  |  | 
|  | conn->resp_addr_type = peer_addr_type; | 
|  | bacpy(&conn->resp_addr, peer_addr); | 
|  |  | 
|  | /* We don't want the connection attempt to stick around | 
|  | * indefinitely since LE doesn't have a page timeout concept | 
|  | * like BR/EDR. Set a timer for any connection that doesn't use | 
|  | * the white list for connecting. | 
|  | */ | 
|  | if (filter_policy == HCI_LE_USE_PEER_ADDR) | 
|  | queue_delayed_work(conn->hdev->workqueue, | 
|  | &conn->le_conn_timeout, | 
|  | conn->conn_timeout); | 
|  | } | 
|  |  | 
|  | static void hci_cs_le_create_conn(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_le_create_conn *cp; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | /* All connection failure handling is taken care of by the | 
|  | * hci_le_conn_failed function which is triggered by the HCI | 
|  | * request completion callbacks used for connecting. | 
|  | */ | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_CREATE_CONN); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | cs_le_create_conn(hdev, &cp->peer_addr, cp->peer_addr_type, | 
|  | cp->own_address_type, cp->filter_policy); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_le_ext_create_conn(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_le_ext_create_conn *cp; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | /* All connection failure handling is taken care of by the | 
|  | * hci_le_conn_failed function which is triggered by the HCI | 
|  | * request completion callbacks used for connecting. | 
|  | */ | 
|  | if (status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_EXT_CREATE_CONN); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | cs_le_create_conn(hdev, &cp->peer_addr, cp->peer_addr_type, | 
|  | cp->own_addr_type, cp->filter_policy); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_le_read_remote_features(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_le_read_remote_features *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_READ_REMOTE_FEATURES); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (conn) { | 
|  | if (conn->state == BT_CONFIG) { | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_le_start_enc(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_le_start_enc *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_LE_START_ENC); | 
|  | if (!cp) | 
|  | goto unlock; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (conn->state != BT_CONNECTED) | 
|  | goto unlock; | 
|  |  | 
|  | hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE); | 
|  | hci_conn_drop(conn); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cs_switch_role(struct hci_dev *hdev, u8 status) | 
|  | { | 
|  | struct hci_cp_switch_role *cp; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | if (!status) | 
|  | return; | 
|  |  | 
|  | cp = hci_sent_cmd_data(hdev, HCI_OP_SWITCH_ROLE); | 
|  | if (!cp) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr); | 
|  | if (conn) | 
|  | clear_bit(HCI_CONN_RSWITCH_PEND, &conn->flags); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | __u8 status = *((__u8 *) skb->data); | 
|  | struct discovery_state *discov = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, status); | 
|  |  | 
|  | hci_conn_check_pending(hdev); | 
|  |  | 
|  | if (!test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) | 
|  | return; | 
|  |  | 
|  | smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */ | 
|  | wake_up_bit(&hdev->flags, HCI_INQUIRY); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (discov->state != DISCOVERY_FINDING) | 
|  | goto unlock; | 
|  |  | 
|  | if (list_empty(&discov->resolve)) { | 
|  | /* When BR/EDR inquiry is active and no LE scanning is in | 
|  | * progress, then change discovery state to indicate completion. | 
|  | * | 
|  | * When running LE scanning and BR/EDR inquiry simultaneously | 
|  | * and the LE scan already finished, then change the discovery | 
|  | * state to indicate completion. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) || | 
|  | !test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks)) | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED); | 
|  | if (e && hci_resolve_name(hdev, e) == 0) { | 
|  | e->name_state = NAME_PENDING; | 
|  | hci_discovery_set_state(hdev, DISCOVERY_RESOLVING); | 
|  | } else { | 
|  | /* When BR/EDR inquiry is active and no LE scanning is in | 
|  | * progress, then change discovery state to indicate completion. | 
|  | * | 
|  | * When running LE scanning and BR/EDR inquiry simultaneously | 
|  | * and the LE scan already finished, then change the discovery | 
|  | * state to indicate completion. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) || | 
|  | !test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks)) | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct inquiry_data data; | 
|  | struct inquiry_info *info = (void *) (skb->data + 1); | 
|  | int num_rsp = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s num_rsp %d", hdev->name, num_rsp); | 
|  |  | 
|  | if (!num_rsp) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ)) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | for (; num_rsp; num_rsp--, info++) { | 
|  | u32 flags; | 
|  |  | 
|  | bacpy(&data.bdaddr, &info->bdaddr); | 
|  | data.pscan_rep_mode	= info->pscan_rep_mode; | 
|  | data.pscan_period_mode	= info->pscan_period_mode; | 
|  | data.pscan_mode		= info->pscan_mode; | 
|  | memcpy(data.dev_class, info->dev_class, 3); | 
|  | data.clock_offset	= info->clock_offset; | 
|  | data.rssi		= HCI_RSSI_INVALID; | 
|  | data.ssp_mode		= 0x00; | 
|  |  | 
|  | flags = hci_inquiry_cache_update(hdev, &data, false); | 
|  |  | 
|  | mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, | 
|  | info->dev_class, HCI_RSSI_INVALID, | 
|  | flags, NULL, 0, NULL, 0); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_conn_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr); | 
|  | if (!conn) { | 
|  | if (ev->link_type != SCO_LINK) | 
|  | goto unlock; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | conn->type = SCO_LINK; | 
|  | } | 
|  |  | 
|  | if (!ev->status) { | 
|  | conn->handle = __le16_to_cpu(ev->handle); | 
|  |  | 
|  | if (conn->type == ACL_LINK) { | 
|  | conn->state = BT_CONFIG; | 
|  | hci_conn_hold(conn); | 
|  |  | 
|  | if (!conn->out && !hci_conn_ssp_enabled(conn) && | 
|  | !hci_find_link_key(hdev, &ev->bdaddr)) | 
|  | conn->disc_timeout = HCI_PAIRING_TIMEOUT; | 
|  | else | 
|  | conn->disc_timeout = HCI_DISCONN_TIMEOUT; | 
|  | } else | 
|  | conn->state = BT_CONNECTED; | 
|  |  | 
|  | hci_debugfs_create_conn(conn); | 
|  | hci_conn_add_sysfs(conn); | 
|  |  | 
|  | if (test_bit(HCI_AUTH, &hdev->flags)) | 
|  | set_bit(HCI_CONN_AUTH, &conn->flags); | 
|  |  | 
|  | if (test_bit(HCI_ENCRYPT, &hdev->flags)) | 
|  | set_bit(HCI_CONN_ENCRYPT, &conn->flags); | 
|  |  | 
|  | /* Get remote features */ | 
|  | if (conn->type == ACL_LINK) { | 
|  | struct hci_cp_read_remote_features cp; | 
|  | cp.handle = ev->handle; | 
|  | hci_send_cmd(hdev, HCI_OP_READ_REMOTE_FEATURES, | 
|  | sizeof(cp), &cp); | 
|  |  | 
|  | hci_req_update_scan(hdev); | 
|  | } | 
|  |  | 
|  | /* Set packet type for incoming connection */ | 
|  | if (!conn->out && hdev->hci_ver < BLUETOOTH_VER_2_0) { | 
|  | struct hci_cp_change_conn_ptype cp; | 
|  | cp.handle = ev->handle; | 
|  | cp.pkt_type = cpu_to_le16(conn->pkt_type); | 
|  | hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp), | 
|  | &cp); | 
|  | } | 
|  | } else { | 
|  | conn->state = BT_CLOSED; | 
|  | if (conn->type == ACL_LINK) | 
|  | mgmt_connect_failed(hdev, &conn->dst, conn->type, | 
|  | conn->dst_type, ev->status); | 
|  | } | 
|  |  | 
|  | if (conn->type == ACL_LINK) | 
|  | hci_sco_setup(conn, ev->status); | 
|  |  | 
|  | if (ev->status) { | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_del(conn); | 
|  | } else if (ev->link_type != ACL_LINK) | 
|  | hci_connect_cfm(conn, ev->status); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | hci_conn_check_pending(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_reject_conn(struct hci_dev *hdev, bdaddr_t *bdaddr) | 
|  | { | 
|  | struct hci_cp_reject_conn_req cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, bdaddr); | 
|  | cp.reason = HCI_ERROR_REJ_BAD_ADDR; | 
|  | hci_send_cmd(hdev, HCI_OP_REJECT_CONN_REQ, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | static void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_conn_request *ev = (void *) skb->data; | 
|  | int mask = hdev->link_mode; | 
|  | struct inquiry_entry *ie; | 
|  | struct hci_conn *conn; | 
|  | __u8 flags = 0; | 
|  |  | 
|  | BT_DBG("%s bdaddr %pMR type 0x%x", hdev->name, &ev->bdaddr, | 
|  | ev->link_type); | 
|  |  | 
|  | mask |= hci_proto_connect_ind(hdev, &ev->bdaddr, ev->link_type, | 
|  | &flags); | 
|  |  | 
|  | if (!(mask & HCI_LM_ACCEPT)) { | 
|  | hci_reject_conn(hdev, &ev->bdaddr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hci_bdaddr_list_lookup(&hdev->blacklist, &ev->bdaddr, | 
|  | BDADDR_BREDR)) { | 
|  | hci_reject_conn(hdev, &ev->bdaddr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Require HCI_CONNECTABLE or a whitelist entry to accept the | 
|  | * connection. These features are only touched through mgmt so | 
|  | * only do the checks if HCI_MGMT is set. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONNECTABLE) && | 
|  | !hci_bdaddr_list_lookup(&hdev->whitelist, &ev->bdaddr, | 
|  | BDADDR_BREDR)) { | 
|  | hci_reject_conn(hdev, &ev->bdaddr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Connection accepted */ | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr); | 
|  | if (ie) | 
|  | memcpy(ie->data.dev_class, ev->dev_class, 3); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, | 
|  | &ev->bdaddr); | 
|  | if (!conn) { | 
|  | conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr, | 
|  | HCI_ROLE_SLAVE); | 
|  | if (!conn) { | 
|  | bt_dev_err(hdev, "no memory for new connection"); | 
|  | hci_dev_unlock(hdev); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(conn->dev_class, ev->dev_class, 3); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | if (ev->link_type == ACL_LINK || | 
|  | (!(flags & HCI_PROTO_DEFER) && !lmp_esco_capable(hdev))) { | 
|  | struct hci_cp_accept_conn_req cp; | 
|  | conn->state = BT_CONNECT; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  |  | 
|  | if (lmp_rswitch_capable(hdev) && (mask & HCI_LM_MASTER)) | 
|  | cp.role = 0x00; /* Become master */ | 
|  | else | 
|  | cp.role = 0x01; /* Remain slave */ | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_ACCEPT_CONN_REQ, sizeof(cp), &cp); | 
|  | } else if (!(flags & HCI_PROTO_DEFER)) { | 
|  | struct hci_cp_accept_sync_conn_req cp; | 
|  | conn->state = BT_CONNECT; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | cp.pkt_type = cpu_to_le16(conn->pkt_type); | 
|  |  | 
|  | cp.tx_bandwidth   = cpu_to_le32(0x00001f40); | 
|  | cp.rx_bandwidth   = cpu_to_le32(0x00001f40); | 
|  | cp.max_latency    = cpu_to_le16(0xffff); | 
|  | cp.content_format = cpu_to_le16(hdev->voice_setting); | 
|  | cp.retrans_effort = 0xff; | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ, sizeof(cp), | 
|  | &cp); | 
|  | } else { | 
|  | conn->state = BT_CONNECT2; | 
|  | hci_connect_cfm(conn, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u8 hci_to_mgmt_reason(u8 err) | 
|  | { | 
|  | switch (err) { | 
|  | case HCI_ERROR_CONNECTION_TIMEOUT: | 
|  | return MGMT_DEV_DISCONN_TIMEOUT; | 
|  | case HCI_ERROR_REMOTE_USER_TERM: | 
|  | case HCI_ERROR_REMOTE_LOW_RESOURCES: | 
|  | case HCI_ERROR_REMOTE_POWER_OFF: | 
|  | return MGMT_DEV_DISCONN_REMOTE; | 
|  | case HCI_ERROR_LOCAL_HOST_TERM: | 
|  | return MGMT_DEV_DISCONN_LOCAL_HOST; | 
|  | default: | 
|  | return MGMT_DEV_DISCONN_UNKNOWN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_disconn_complete *ev = (void *) skb->data; | 
|  | u8 reason; | 
|  | struct hci_conn_params *params; | 
|  | struct hci_conn *conn; | 
|  | bool mgmt_connected; | 
|  | u8 type; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (ev->status) { | 
|  | mgmt_disconnect_failed(hdev, &conn->dst, conn->type, | 
|  | conn->dst_type, ev->status); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | conn->state = BT_CLOSED; | 
|  |  | 
|  | mgmt_connected = test_and_clear_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags); | 
|  |  | 
|  | if (test_bit(HCI_CONN_AUTH_FAILURE, &conn->flags)) | 
|  | reason = MGMT_DEV_DISCONN_AUTH_FAILURE; | 
|  | else | 
|  | reason = hci_to_mgmt_reason(ev->reason); | 
|  |  | 
|  | mgmt_device_disconnected(hdev, &conn->dst, conn->type, conn->dst_type, | 
|  | reason, mgmt_connected); | 
|  |  | 
|  | if (conn->type == ACL_LINK) { | 
|  | if (test_bit(HCI_CONN_FLUSH_KEY, &conn->flags)) | 
|  | hci_remove_link_key(hdev, &conn->dst); | 
|  |  | 
|  | hci_req_update_scan(hdev); | 
|  | } | 
|  |  | 
|  | params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type); | 
|  | if (params) { | 
|  | switch (params->auto_connect) { | 
|  | case HCI_AUTO_CONN_LINK_LOSS: | 
|  | if (ev->reason != HCI_ERROR_CONNECTION_TIMEOUT) | 
|  | break; | 
|  | /* Fall through */ | 
|  |  | 
|  | case HCI_AUTO_CONN_DIRECT: | 
|  | case HCI_AUTO_CONN_ALWAYS: | 
|  | list_del_init(¶ms->action); | 
|  | list_add(¶ms->action, &hdev->pend_le_conns); | 
|  | hci_update_background_scan(hdev); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | type = conn->type; | 
|  |  | 
|  | hci_disconn_cfm(conn, ev->reason); | 
|  | hci_conn_del(conn); | 
|  |  | 
|  | /* Re-enable advertising if necessary, since it might | 
|  | * have been disabled by the connection. From the | 
|  | * HCI_LE_Set_Advertise_Enable command description in | 
|  | * the core specification (v4.0): | 
|  | * "The Controller shall continue advertising until the Host | 
|  | * issues an LE_Set_Advertise_Enable command with | 
|  | * Advertising_Enable set to 0x00 (Advertising is disabled) | 
|  | * or until a connection is created or until the Advertising | 
|  | * is timed out due to Directed Advertising." | 
|  | */ | 
|  | if (type == LE_LINK) | 
|  | hci_req_reenable_advertising(hdev); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_auth_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status) { | 
|  | clear_bit(HCI_CONN_AUTH_FAILURE, &conn->flags); | 
|  |  | 
|  | if (!hci_conn_ssp_enabled(conn) && | 
|  | test_bit(HCI_CONN_REAUTH_PEND, &conn->flags)) { | 
|  | bt_dev_info(hdev, "re-auth of legacy device is not possible."); | 
|  | } else { | 
|  | set_bit(HCI_CONN_AUTH, &conn->flags); | 
|  | conn->sec_level = conn->pending_sec_level; | 
|  | } | 
|  | } else { | 
|  | if (ev->status == HCI_ERROR_PIN_OR_KEY_MISSING) | 
|  | set_bit(HCI_CONN_AUTH_FAILURE, &conn->flags); | 
|  |  | 
|  | mgmt_auth_failed(conn, ev->status); | 
|  | } | 
|  |  | 
|  | clear_bit(HCI_CONN_AUTH_PEND, &conn->flags); | 
|  | clear_bit(HCI_CONN_REAUTH_PEND, &conn->flags); | 
|  |  | 
|  | if (conn->state == BT_CONFIG) { | 
|  | if (!ev->status && hci_conn_ssp_enabled(conn)) { | 
|  | struct hci_cp_set_conn_encrypt cp; | 
|  | cp.handle  = ev->handle; | 
|  | cp.encrypt = 0x01; | 
|  | hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp), | 
|  | &cp); | 
|  | } else { | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } else { | 
|  | hci_auth_cfm(conn, ev->status); | 
|  |  | 
|  | hci_conn_hold(conn); | 
|  | conn->disc_timeout = HCI_DISCONN_TIMEOUT; | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  |  | 
|  | if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) { | 
|  | if (!ev->status) { | 
|  | struct hci_cp_set_conn_encrypt cp; | 
|  | cp.handle  = ev->handle; | 
|  | cp.encrypt = 0x01; | 
|  | hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp), | 
|  | &cp); | 
|  | } else { | 
|  | clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags); | 
|  | hci_encrypt_cfm(conn, ev->status, 0x00); | 
|  | } | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_remote_name *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_conn_check_pending(hdev); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | goto check_auth; | 
|  |  | 
|  | if (ev->status == 0) | 
|  | hci_check_pending_name(hdev, conn, &ev->bdaddr, ev->name, | 
|  | strnlen(ev->name, HCI_MAX_NAME_LENGTH)); | 
|  | else | 
|  | hci_check_pending_name(hdev, conn, &ev->bdaddr, NULL, 0); | 
|  |  | 
|  | check_auth: | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (!hci_outgoing_auth_needed(hdev, conn)) | 
|  | goto unlock; | 
|  |  | 
|  | if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) { | 
|  | struct hci_cp_auth_requested cp; | 
|  |  | 
|  | set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags); | 
|  |  | 
|  | cp.handle = __cpu_to_le16(conn->handle); | 
|  | hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void read_enc_key_size_complete(struct hci_dev *hdev, u8 status, | 
|  | u16 opcode, struct sk_buff *skb) | 
|  | { | 
|  | const struct hci_rp_read_enc_key_size *rp; | 
|  | struct hci_conn *conn; | 
|  | u16 handle; | 
|  |  | 
|  | BT_DBG("%s status 0x%02x", hdev->name, status); | 
|  |  | 
|  | if (!skb || skb->len < sizeof(*rp)) { | 
|  | bt_dev_err(hdev, "invalid read key size response"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rp = (void *)skb->data; | 
|  | handle = le16_to_cpu(rp->handle); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | /* If we fail to read the encryption key size, assume maximum | 
|  | * (which is the same we do also when this HCI command isn't | 
|  | * supported. | 
|  | */ | 
|  | if (rp->status) { | 
|  | bt_dev_err(hdev, "failed to read key size for handle %u", | 
|  | handle); | 
|  | conn->enc_key_size = HCI_LINK_KEY_SIZE; | 
|  | } else { | 
|  | conn->enc_key_size = rp->key_size; | 
|  | } | 
|  |  | 
|  | if (conn->state == BT_CONFIG) { | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, 0); | 
|  | hci_conn_drop(conn); | 
|  | } else { | 
|  | u8 encrypt; | 
|  |  | 
|  | if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags)) | 
|  | encrypt = 0x00; | 
|  | else if (test_bit(HCI_CONN_AES_CCM, &conn->flags)) | 
|  | encrypt = 0x02; | 
|  | else | 
|  | encrypt = 0x01; | 
|  |  | 
|  | hci_encrypt_cfm(conn, 0, encrypt); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_encrypt_change *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status) { | 
|  | if (ev->encrypt) { | 
|  | /* Encryption implies authentication */ | 
|  | set_bit(HCI_CONN_AUTH, &conn->flags); | 
|  | set_bit(HCI_CONN_ENCRYPT, &conn->flags); | 
|  | conn->sec_level = conn->pending_sec_level; | 
|  |  | 
|  | /* P-256 authentication key implies FIPS */ | 
|  | if (conn->key_type == HCI_LK_AUTH_COMBINATION_P256) | 
|  | set_bit(HCI_CONN_FIPS, &conn->flags); | 
|  |  | 
|  | if ((conn->type == ACL_LINK && ev->encrypt == 0x02) || | 
|  | conn->type == LE_LINK) | 
|  | set_bit(HCI_CONN_AES_CCM, &conn->flags); | 
|  | } else { | 
|  | clear_bit(HCI_CONN_ENCRYPT, &conn->flags); | 
|  | clear_bit(HCI_CONN_AES_CCM, &conn->flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* We should disregard the current RPA and generate a new one | 
|  | * whenever the encryption procedure fails. | 
|  | */ | 
|  | if (ev->status && conn->type == LE_LINK) { | 
|  | hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); | 
|  | hci_adv_instances_set_rpa_expired(hdev, true); | 
|  | } | 
|  |  | 
|  | clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags); | 
|  |  | 
|  | if (ev->status && conn->state == BT_CONNECTED) { | 
|  | if (ev->status == HCI_ERROR_PIN_OR_KEY_MISSING) | 
|  | set_bit(HCI_CONN_AUTH_FAILURE, &conn->flags); | 
|  |  | 
|  | hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE); | 
|  | hci_conn_drop(conn); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* In Secure Connections Only mode, do not allow any connections | 
|  | * that are not encrypted with AES-CCM using a P-256 authenticated | 
|  | * combination key. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_SC_ONLY) && | 
|  | (!test_bit(HCI_CONN_AES_CCM, &conn->flags) || | 
|  | conn->key_type != HCI_LK_AUTH_COMBINATION_P256)) { | 
|  | hci_connect_cfm(conn, HCI_ERROR_AUTH_FAILURE); | 
|  | hci_conn_drop(conn); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* Try reading the encryption key size for encrypted ACL links */ | 
|  | if (!ev->status && ev->encrypt && conn->type == ACL_LINK) { | 
|  | struct hci_cp_read_enc_key_size cp; | 
|  | struct hci_request req; | 
|  |  | 
|  | /* Only send HCI_Read_Encryption_Key_Size if the | 
|  | * controller really supports it. If it doesn't, assume | 
|  | * the default size (16). | 
|  | */ | 
|  | if (!(hdev->commands[20] & 0x10)) { | 
|  | conn->enc_key_size = HCI_LINK_KEY_SIZE; | 
|  | goto notify; | 
|  | } | 
|  |  | 
|  | hci_req_init(&req, hdev); | 
|  |  | 
|  | cp.handle = cpu_to_le16(conn->handle); | 
|  | hci_req_add(&req, HCI_OP_READ_ENC_KEY_SIZE, sizeof(cp), &cp); | 
|  |  | 
|  | if (hci_req_run_skb(&req, read_enc_key_size_complete)) { | 
|  | bt_dev_err(hdev, "sending read key size failed"); | 
|  | conn->enc_key_size = HCI_LINK_KEY_SIZE; | 
|  | goto notify; | 
|  | } | 
|  |  | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | notify: | 
|  | if (conn->state == BT_CONFIG) { | 
|  | if (!ev->status) | 
|  | conn->state = BT_CONNECTED; | 
|  |  | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_drop(conn); | 
|  | } else | 
|  | hci_encrypt_cfm(conn, ev->status, ev->encrypt); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_change_link_key_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_change_link_key_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn) { | 
|  | if (!ev->status) | 
|  | set_bit(HCI_CONN_SECURE, &conn->flags); | 
|  |  | 
|  | clear_bit(HCI_CONN_AUTH_PEND, &conn->flags); | 
|  |  | 
|  | hci_key_change_cfm(conn, ev->status); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_remote_features_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_remote_features *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status) | 
|  | memcpy(conn->features[0], ev->features, 8); | 
|  |  | 
|  | if (conn->state != BT_CONFIG) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status && lmp_ext_feat_capable(hdev) && | 
|  | lmp_ext_feat_capable(conn)) { | 
|  | struct hci_cp_read_remote_ext_features cp; | 
|  | cp.handle = ev->handle; | 
|  | cp.page = 0x01; | 
|  | hci_send_cmd(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES, | 
|  | sizeof(cp), &cp); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) { | 
|  | struct hci_cp_remote_name_req cp; | 
|  | memset(&cp, 0, sizeof(cp)); | 
|  | bacpy(&cp.bdaddr, &conn->dst); | 
|  | cp.pscan_rep_mode = 0x02; | 
|  | hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp); | 
|  | } else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) | 
|  | mgmt_device_connected(hdev, conn, 0, NULL, 0); | 
|  |  | 
|  | if (!hci_outgoing_auth_needed(hdev, conn)) { | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb, | 
|  | u16 *opcode, u8 *status, | 
|  | hci_req_complete_t *req_complete, | 
|  | hci_req_complete_skb_t *req_complete_skb) | 
|  | { | 
|  | struct hci_ev_cmd_complete *ev = (void *) skb->data; | 
|  |  | 
|  | *opcode = __le16_to_cpu(ev->opcode); | 
|  | *status = skb->data[sizeof(*ev)]; | 
|  |  | 
|  | skb_pull(skb, sizeof(*ev)); | 
|  |  | 
|  | switch (*opcode) { | 
|  | case HCI_OP_INQUIRY_CANCEL: | 
|  | hci_cc_inquiry_cancel(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_PERIODIC_INQ: | 
|  | hci_cc_periodic_inq(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_EXIT_PERIODIC_INQ: | 
|  | hci_cc_exit_periodic_inq(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_REMOTE_NAME_REQ_CANCEL: | 
|  | hci_cc_remote_name_req_cancel(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_ROLE_DISCOVERY: | 
|  | hci_cc_role_discovery(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LINK_POLICY: | 
|  | hci_cc_read_link_policy(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_LINK_POLICY: | 
|  | hci_cc_write_link_policy(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_DEF_LINK_POLICY: | 
|  | hci_cc_read_def_link_policy(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_DEF_LINK_POLICY: | 
|  | hci_cc_write_def_link_policy(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_RESET: | 
|  | hci_cc_reset(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_STORED_LINK_KEY: | 
|  | hci_cc_read_stored_link_key(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_DELETE_STORED_LINK_KEY: | 
|  | hci_cc_delete_stored_link_key(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_LOCAL_NAME: | 
|  | hci_cc_write_local_name(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_NAME: | 
|  | hci_cc_read_local_name(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_AUTH_ENABLE: | 
|  | hci_cc_write_auth_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_ENCRYPT_MODE: | 
|  | hci_cc_write_encrypt_mode(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_SCAN_ENABLE: | 
|  | hci_cc_write_scan_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_CLASS_OF_DEV: | 
|  | hci_cc_read_class_of_dev(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_CLASS_OF_DEV: | 
|  | hci_cc_write_class_of_dev(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_VOICE_SETTING: | 
|  | hci_cc_read_voice_setting(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_VOICE_SETTING: | 
|  | hci_cc_write_voice_setting(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_NUM_SUPPORTED_IAC: | 
|  | hci_cc_read_num_supported_iac(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_SSP_MODE: | 
|  | hci_cc_write_ssp_mode(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_SC_SUPPORT: | 
|  | hci_cc_write_sc_support(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_VERSION: | 
|  | hci_cc_read_local_version(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_COMMANDS: | 
|  | hci_cc_read_local_commands(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_FEATURES: | 
|  | hci_cc_read_local_features(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_EXT_FEATURES: | 
|  | hci_cc_read_local_ext_features(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_BUFFER_SIZE: | 
|  | hci_cc_read_buffer_size(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_BD_ADDR: | 
|  | hci_cc_read_bd_addr(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_PAGE_SCAN_ACTIVITY: | 
|  | hci_cc_read_page_scan_activity(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_PAGE_SCAN_ACTIVITY: | 
|  | hci_cc_write_page_scan_activity(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_PAGE_SCAN_TYPE: | 
|  | hci_cc_read_page_scan_type(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_PAGE_SCAN_TYPE: | 
|  | hci_cc_write_page_scan_type(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_DATA_BLOCK_SIZE: | 
|  | hci_cc_read_data_block_size(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_FLOW_CONTROL_MODE: | 
|  | hci_cc_read_flow_control_mode(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_AMP_INFO: | 
|  | hci_cc_read_local_amp_info(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_CLOCK: | 
|  | hci_cc_read_clock(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_INQ_RSP_TX_POWER: | 
|  | hci_cc_read_inq_rsp_tx_power(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_PIN_CODE_REPLY: | 
|  | hci_cc_pin_code_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_PIN_CODE_NEG_REPLY: | 
|  | hci_cc_pin_code_neg_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_OOB_DATA: | 
|  | hci_cc_read_local_oob_data(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_LOCAL_OOB_EXT_DATA: | 
|  | hci_cc_read_local_oob_ext_data(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_BUFFER_SIZE: | 
|  | hci_cc_le_read_buffer_size(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_LOCAL_FEATURES: | 
|  | hci_cc_le_read_local_features(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_ADV_TX_POWER: | 
|  | hci_cc_le_read_adv_tx_power(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_USER_CONFIRM_REPLY: | 
|  | hci_cc_user_confirm_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_USER_CONFIRM_NEG_REPLY: | 
|  | hci_cc_user_confirm_neg_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_USER_PASSKEY_REPLY: | 
|  | hci_cc_user_passkey_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_USER_PASSKEY_NEG_REPLY: | 
|  | hci_cc_user_passkey_neg_reply(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_RANDOM_ADDR: | 
|  | hci_cc_le_set_random_addr(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_ADV_ENABLE: | 
|  | hci_cc_le_set_adv_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_SCAN_PARAM: | 
|  | hci_cc_le_set_scan_param(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_SCAN_ENABLE: | 
|  | hci_cc_le_set_scan_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_WHITE_LIST_SIZE: | 
|  | hci_cc_le_read_white_list_size(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_CLEAR_WHITE_LIST: | 
|  | hci_cc_le_clear_white_list(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_ADD_TO_WHITE_LIST: | 
|  | hci_cc_le_add_to_white_list(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_DEL_FROM_WHITE_LIST: | 
|  | hci_cc_le_del_from_white_list(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_SUPPORTED_STATES: | 
|  | hci_cc_le_read_supported_states(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_DEF_DATA_LEN: | 
|  | hci_cc_le_read_def_data_len(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_WRITE_DEF_DATA_LEN: | 
|  | hci_cc_le_write_def_data_len(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_CLEAR_RESOLV_LIST: | 
|  | hci_cc_le_clear_resolv_list(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_RESOLV_LIST_SIZE: | 
|  | hci_cc_le_read_resolv_list_size(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_ADDR_RESOLV_ENABLE: | 
|  | hci_cc_le_set_addr_resolution_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_MAX_DATA_LEN: | 
|  | hci_cc_le_read_max_data_len(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_LE_HOST_SUPPORTED: | 
|  | hci_cc_write_le_host_supported(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_ADV_PARAM: | 
|  | hci_cc_set_adv_param(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_RSSI: | 
|  | hci_cc_read_rssi(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_TX_POWER: | 
|  | hci_cc_read_tx_power(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_WRITE_SSP_DEBUG_MODE: | 
|  | hci_cc_write_ssp_debug_mode(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_EXT_SCAN_PARAMS: | 
|  | hci_cc_le_set_ext_scan_param(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_EXT_SCAN_ENABLE: | 
|  | hci_cc_le_set_ext_scan_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_DEFAULT_PHY: | 
|  | hci_cc_le_set_default_phy(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS: | 
|  | hci_cc_le_read_num_adv_sets(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_EXT_ADV_PARAMS: | 
|  | hci_cc_set_ext_adv_param(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_EXT_ADV_ENABLE: | 
|  | hci_cc_le_set_ext_adv_enable(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_SET_ADV_SET_RAND_ADDR: | 
|  | hci_cc_le_set_adv_set_random_addr(hdev, skb); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (*opcode != HCI_OP_NOP) | 
|  | cancel_delayed_work(&hdev->cmd_timer); | 
|  |  | 
|  | if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  |  | 
|  | hci_req_cmd_complete(hdev, *opcode, *status, req_complete, | 
|  | req_complete_skb); | 
|  |  | 
|  | if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q)) | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  | } | 
|  |  | 
|  | static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb, | 
|  | u16 *opcode, u8 *status, | 
|  | hci_req_complete_t *req_complete, | 
|  | hci_req_complete_skb_t *req_complete_skb) | 
|  | { | 
|  | struct hci_ev_cmd_status *ev = (void *) skb->data; | 
|  |  | 
|  | skb_pull(skb, sizeof(*ev)); | 
|  |  | 
|  | *opcode = __le16_to_cpu(ev->opcode); | 
|  | *status = ev->status; | 
|  |  | 
|  | switch (*opcode) { | 
|  | case HCI_OP_INQUIRY: | 
|  | hci_cs_inquiry(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_CREATE_CONN: | 
|  | hci_cs_create_conn(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_DISCONNECT: | 
|  | hci_cs_disconnect(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_ADD_SCO: | 
|  | hci_cs_add_sco(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_AUTH_REQUESTED: | 
|  | hci_cs_auth_requested(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_SET_CONN_ENCRYPT: | 
|  | hci_cs_set_conn_encrypt(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_REMOTE_NAME_REQ: | 
|  | hci_cs_remote_name_req(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_REMOTE_FEATURES: | 
|  | hci_cs_read_remote_features(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_READ_REMOTE_EXT_FEATURES: | 
|  | hci_cs_read_remote_ext_features(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_SETUP_SYNC_CONN: | 
|  | hci_cs_setup_sync_conn(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_SNIFF_MODE: | 
|  | hci_cs_sniff_mode(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_EXIT_SNIFF_MODE: | 
|  | hci_cs_exit_sniff_mode(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_SWITCH_ROLE: | 
|  | hci_cs_switch_role(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_CREATE_CONN: | 
|  | hci_cs_le_create_conn(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_READ_REMOTE_FEATURES: | 
|  | hci_cs_le_read_remote_features(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_START_ENC: | 
|  | hci_cs_le_start_enc(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | case HCI_OP_LE_EXT_CREATE_CONN: | 
|  | hci_cs_le_ext_create_conn(hdev, ev->status); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (*opcode != HCI_OP_NOP) | 
|  | cancel_delayed_work(&hdev->cmd_timer); | 
|  |  | 
|  | if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  |  | 
|  | /* Indicate request completion if the command failed. Also, if | 
|  | * we're not waiting for a special event and we get a success | 
|  | * command status we should try to flag the request as completed | 
|  | * (since for this kind of commands there will not be a command | 
|  | * complete event). | 
|  | */ | 
|  | if (ev->status || | 
|  | (hdev->sent_cmd && !bt_cb(hdev->sent_cmd)->hci.req_event)) | 
|  | hci_req_cmd_complete(hdev, *opcode, ev->status, req_complete, | 
|  | req_complete_skb); | 
|  |  | 
|  | if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q)) | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  | } | 
|  |  | 
|  | static void hci_hardware_error_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_hardware_error *ev = (void *) skb->data; | 
|  |  | 
|  | hdev->hw_error_code = ev->code; | 
|  |  | 
|  | queue_work(hdev->req_workqueue, &hdev->error_reset); | 
|  | } | 
|  |  | 
|  | static void hci_role_change_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_role_change *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (conn) { | 
|  | if (!ev->status) | 
|  | conn->role = ev->role; | 
|  |  | 
|  | clear_bit(HCI_CONN_RSWITCH_PEND, &conn->flags); | 
|  |  | 
|  | hci_role_switch_cfm(conn, ev->status, ev->role); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_num_comp_pkts_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_num_comp_pkts *ev = (void *) skb->data; | 
|  | int i; | 
|  |  | 
|  | if (hdev->flow_ctl_mode != HCI_FLOW_CTL_MODE_PACKET_BASED) { | 
|  | bt_dev_err(hdev, "wrong event for mode %d", hdev->flow_ctl_mode); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (skb->len < sizeof(*ev) || skb->len < sizeof(*ev) + | 
|  | ev->num_hndl * sizeof(struct hci_comp_pkts_info)) { | 
|  | BT_DBG("%s bad parameters", hdev->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | BT_DBG("%s num_hndl %d", hdev->name, ev->num_hndl); | 
|  |  | 
|  | for (i = 0; i < ev->num_hndl; i++) { | 
|  | struct hci_comp_pkts_info *info = &ev->handles[i]; | 
|  | struct hci_conn *conn; | 
|  | __u16  handle, count; | 
|  |  | 
|  | handle = __le16_to_cpu(info->handle); | 
|  | count  = __le16_to_cpu(info->count); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | if (!conn) | 
|  | continue; | 
|  |  | 
|  | conn->sent -= count; | 
|  |  | 
|  | switch (conn->type) { | 
|  | case ACL_LINK: | 
|  | hdev->acl_cnt += count; | 
|  | if (hdev->acl_cnt > hdev->acl_pkts) | 
|  | hdev->acl_cnt = hdev->acl_pkts; | 
|  | break; | 
|  |  | 
|  | case LE_LINK: | 
|  | if (hdev->le_pkts) { | 
|  | hdev->le_cnt += count; | 
|  | if (hdev->le_cnt > hdev->le_pkts) | 
|  | hdev->le_cnt = hdev->le_pkts; | 
|  | } else { | 
|  | hdev->acl_cnt += count; | 
|  | if (hdev->acl_cnt > hdev->acl_pkts) | 
|  | hdev->acl_cnt = hdev->acl_pkts; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case SCO_LINK: | 
|  | hdev->sco_cnt += count; | 
|  | if (hdev->sco_cnt > hdev->sco_pkts) | 
|  | hdev->sco_cnt = hdev->sco_pkts; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | bt_dev_err(hdev, "unknown type %d conn %p", | 
|  | conn->type, conn); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | queue_work(hdev->workqueue, &hdev->tx_work); | 
|  | } | 
|  |  | 
|  | static struct hci_conn *__hci_conn_lookup_handle(struct hci_dev *hdev, | 
|  | __u16 handle) | 
|  | { | 
|  | struct hci_chan *chan; | 
|  |  | 
|  | switch (hdev->dev_type) { | 
|  | case HCI_PRIMARY: | 
|  | return hci_conn_hash_lookup_handle(hdev, handle); | 
|  | case HCI_AMP: | 
|  | chan = hci_chan_lookup_handle(hdev, handle); | 
|  | if (chan) | 
|  | return chan->conn; | 
|  | break; | 
|  | default: | 
|  | bt_dev_err(hdev, "unknown dev_type %d", hdev->dev_type); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void hci_num_comp_blocks_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_num_comp_blocks *ev = (void *) skb->data; | 
|  | int i; | 
|  |  | 
|  | if (hdev->flow_ctl_mode != HCI_FLOW_CTL_MODE_BLOCK_BASED) { | 
|  | bt_dev_err(hdev, "wrong event for mode %d", hdev->flow_ctl_mode); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (skb->len < sizeof(*ev) || skb->len < sizeof(*ev) + | 
|  | ev->num_hndl * sizeof(struct hci_comp_blocks_info)) { | 
|  | BT_DBG("%s bad parameters", hdev->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | BT_DBG("%s num_blocks %d num_hndl %d", hdev->name, ev->num_blocks, | 
|  | ev->num_hndl); | 
|  |  | 
|  | for (i = 0; i < ev->num_hndl; i++) { | 
|  | struct hci_comp_blocks_info *info = &ev->handles[i]; | 
|  | struct hci_conn *conn = NULL; | 
|  | __u16  handle, block_count; | 
|  |  | 
|  | handle = __le16_to_cpu(info->handle); | 
|  | block_count = __le16_to_cpu(info->blocks); | 
|  |  | 
|  | conn = __hci_conn_lookup_handle(hdev, handle); | 
|  | if (!conn) | 
|  | continue; | 
|  |  | 
|  | conn->sent -= block_count; | 
|  |  | 
|  | switch (conn->type) { | 
|  | case ACL_LINK: | 
|  | case AMP_LINK: | 
|  | hdev->block_cnt += block_count; | 
|  | if (hdev->block_cnt > hdev->num_blocks) | 
|  | hdev->block_cnt = hdev->num_blocks; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | bt_dev_err(hdev, "unknown type %d conn %p", | 
|  | conn->type, conn); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | queue_work(hdev->workqueue, &hdev->tx_work); | 
|  | } | 
|  |  | 
|  | static void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_mode_change *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn) { | 
|  | conn->mode = ev->mode; | 
|  |  | 
|  | if (!test_and_clear_bit(HCI_CONN_MODE_CHANGE_PEND, | 
|  | &conn->flags)) { | 
|  | if (conn->mode == HCI_CM_ACTIVE) | 
|  | set_bit(HCI_CONN_POWER_SAVE, &conn->flags); | 
|  | else | 
|  | clear_bit(HCI_CONN_POWER_SAVE, &conn->flags); | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags)) | 
|  | hci_sco_setup(conn, ev->status); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_pin_code_req *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (conn->state == BT_CONNECTED) { | 
|  | hci_conn_hold(conn); | 
|  | conn->disc_timeout = HCI_PAIRING_TIMEOUT; | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_BONDABLE) && | 
|  | !test_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags)) { | 
|  | hci_send_cmd(hdev, HCI_OP_PIN_CODE_NEG_REPLY, | 
|  | sizeof(ev->bdaddr), &ev->bdaddr); | 
|  | } else if (hci_dev_test_flag(hdev, HCI_MGMT)) { | 
|  | u8 secure; | 
|  |  | 
|  | if (conn->pending_sec_level == BT_SECURITY_HIGH) | 
|  | secure = 1; | 
|  | else | 
|  | secure = 0; | 
|  |  | 
|  | mgmt_pin_code_request(hdev, &ev->bdaddr, secure); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void conn_set_key(struct hci_conn *conn, u8 key_type, u8 pin_len) | 
|  | { | 
|  | if (key_type == HCI_LK_CHANGED_COMBINATION) | 
|  | return; | 
|  |  | 
|  | conn->pin_length = pin_len; | 
|  | conn->key_type = key_type; | 
|  |  | 
|  | switch (key_type) { | 
|  | case HCI_LK_LOCAL_UNIT: | 
|  | case HCI_LK_REMOTE_UNIT: | 
|  | case HCI_LK_DEBUG_COMBINATION: | 
|  | return; | 
|  | case HCI_LK_COMBINATION: | 
|  | if (pin_len == 16) | 
|  | conn->pending_sec_level = BT_SECURITY_HIGH; | 
|  | else | 
|  | conn->pending_sec_level = BT_SECURITY_MEDIUM; | 
|  | break; | 
|  | case HCI_LK_UNAUTH_COMBINATION_P192: | 
|  | case HCI_LK_UNAUTH_COMBINATION_P256: | 
|  | conn->pending_sec_level = BT_SECURITY_MEDIUM; | 
|  | break; | 
|  | case HCI_LK_AUTH_COMBINATION_P192: | 
|  | conn->pending_sec_level = BT_SECURITY_HIGH; | 
|  | break; | 
|  | case HCI_LK_AUTH_COMBINATION_P256: | 
|  | conn->pending_sec_level = BT_SECURITY_FIPS; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_link_key_req *ev = (void *) skb->data; | 
|  | struct hci_cp_link_key_reply cp; | 
|  | struct hci_conn *conn; | 
|  | struct link_key *key; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | key = hci_find_link_key(hdev, &ev->bdaddr); | 
|  | if (!key) { | 
|  | BT_DBG("%s link key not found for %pMR", hdev->name, | 
|  | &ev->bdaddr); | 
|  | goto not_found; | 
|  | } | 
|  |  | 
|  | BT_DBG("%s found key type %u for %pMR", hdev->name, key->type, | 
|  | &ev->bdaddr); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (conn) { | 
|  | clear_bit(HCI_CONN_NEW_LINK_KEY, &conn->flags); | 
|  |  | 
|  | if ((key->type == HCI_LK_UNAUTH_COMBINATION_P192 || | 
|  | key->type == HCI_LK_UNAUTH_COMBINATION_P256) && | 
|  | conn->auth_type != 0xff && (conn->auth_type & 0x01)) { | 
|  | BT_DBG("%s ignoring unauthenticated key", hdev->name); | 
|  | goto not_found; | 
|  | } | 
|  |  | 
|  | if (key->type == HCI_LK_COMBINATION && key->pin_len < 16 && | 
|  | (conn->pending_sec_level == BT_SECURITY_HIGH || | 
|  | conn->pending_sec_level == BT_SECURITY_FIPS)) { | 
|  | BT_DBG("%s ignoring key unauthenticated for high security", | 
|  | hdev->name); | 
|  | goto not_found; | 
|  | } | 
|  |  | 
|  | conn_set_key(conn, key->type, key->pin_len); | 
|  | } | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | memcpy(cp.link_key, key->val, HCI_LINK_KEY_SIZE); | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_LINK_KEY_REPLY, sizeof(cp), &cp); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | return; | 
|  |  | 
|  | not_found: | 
|  | hci_send_cmd(hdev, HCI_OP_LINK_KEY_NEG_REPLY, 6, &ev->bdaddr); | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_link_key_notify *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  | struct link_key *key; | 
|  | bool persistent; | 
|  | u8 pin_len = 0; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | hci_conn_hold(conn); | 
|  | conn->disc_timeout = HCI_DISCONN_TIMEOUT; | 
|  | hci_conn_drop(conn); | 
|  |  | 
|  | set_bit(HCI_CONN_NEW_LINK_KEY, &conn->flags); | 
|  | conn_set_key(conn, ev->key_type, conn->pin_length); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | goto unlock; | 
|  |  | 
|  | key = hci_add_link_key(hdev, conn, &ev->bdaddr, ev->link_key, | 
|  | ev->key_type, pin_len, &persistent); | 
|  | if (!key) | 
|  | goto unlock; | 
|  |  | 
|  | /* Update connection information since adding the key will have | 
|  | * fixed up the type in the case of changed combination keys. | 
|  | */ | 
|  | if (ev->key_type == HCI_LK_CHANGED_COMBINATION) | 
|  | conn_set_key(conn, key->type, key->pin_len); | 
|  |  | 
|  | mgmt_new_link_key(hdev, key, persistent); | 
|  |  | 
|  | /* Keep debug keys around only if the HCI_KEEP_DEBUG_KEYS flag | 
|  | * is set. If it's not set simply remove the key from the kernel | 
|  | * list (we've still notified user space about it but with | 
|  | * store_hint being 0). | 
|  | */ | 
|  | if (key->type == HCI_LK_DEBUG_COMBINATION && | 
|  | !hci_dev_test_flag(hdev, HCI_KEEP_DEBUG_KEYS)) { | 
|  | list_del_rcu(&key->list); | 
|  | kfree_rcu(key, rcu); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (persistent) | 
|  | clear_bit(HCI_CONN_FLUSH_KEY, &conn->flags); | 
|  | else | 
|  | set_bit(HCI_CONN_FLUSH_KEY, &conn->flags); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_clock_offset *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn && !ev->status) { | 
|  | struct inquiry_entry *ie; | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &conn->dst); | 
|  | if (ie) { | 
|  | ie->data.clock_offset = ev->clock_offset; | 
|  | ie->timestamp = jiffies; | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_pkt_type_change_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_pkt_type_change *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn && !ev->status) | 
|  | conn->pkt_type = __le16_to_cpu(ev->pkt_type); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_pscan_rep_mode_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_pscan_rep_mode *ev = (void *) skb->data; | 
|  | struct inquiry_entry *ie; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr); | 
|  | if (ie) { | 
|  | ie->data.pscan_rep_mode = ev->pscan_rep_mode; | 
|  | ie->timestamp = jiffies; | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct inquiry_data data; | 
|  | int num_rsp = *((__u8 *) skb->data); | 
|  |  | 
|  | BT_DBG("%s num_rsp %d", hdev->name, num_rsp); | 
|  |  | 
|  | if (!num_rsp) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ)) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if ((skb->len - 1) / num_rsp != sizeof(struct inquiry_info_with_rssi)) { | 
|  | struct inquiry_info_with_rssi_and_pscan_mode *info; | 
|  | info = (void *) (skb->data + 1); | 
|  |  | 
|  | for (; num_rsp; num_rsp--, info++) { | 
|  | u32 flags; | 
|  |  | 
|  | bacpy(&data.bdaddr, &info->bdaddr); | 
|  | data.pscan_rep_mode	= info->pscan_rep_mode; | 
|  | data.pscan_period_mode	= info->pscan_period_mode; | 
|  | data.pscan_mode		= info->pscan_mode; | 
|  | memcpy(data.dev_class, info->dev_class, 3); | 
|  | data.clock_offset	= info->clock_offset; | 
|  | data.rssi		= info->rssi; | 
|  | data.ssp_mode		= 0x00; | 
|  |  | 
|  | flags = hci_inquiry_cache_update(hdev, &data, false); | 
|  |  | 
|  | mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, | 
|  | info->dev_class, info->rssi, | 
|  | flags, NULL, 0, NULL, 0); | 
|  | } | 
|  | } else { | 
|  | struct inquiry_info_with_rssi *info = (void *) (skb->data + 1); | 
|  |  | 
|  | for (; num_rsp; num_rsp--, info++) { | 
|  | u32 flags; | 
|  |  | 
|  | bacpy(&data.bdaddr, &info->bdaddr); | 
|  | data.pscan_rep_mode	= info->pscan_rep_mode; | 
|  | data.pscan_period_mode	= info->pscan_period_mode; | 
|  | data.pscan_mode		= 0x00; | 
|  | memcpy(data.dev_class, info->dev_class, 3); | 
|  | data.clock_offset	= info->clock_offset; | 
|  | data.rssi		= info->rssi; | 
|  | data.ssp_mode		= 0x00; | 
|  |  | 
|  | flags = hci_inquiry_cache_update(hdev, &data, false); | 
|  |  | 
|  | mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, | 
|  | info->dev_class, info->rssi, | 
|  | flags, NULL, 0, NULL, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_remote_ext_features_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_remote_ext_features *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | if (ev->page < HCI_MAX_PAGES) | 
|  | memcpy(conn->features[ev->page], ev->features, 8); | 
|  |  | 
|  | if (!ev->status && ev->page == 0x01) { | 
|  | struct inquiry_entry *ie; | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &conn->dst); | 
|  | if (ie) | 
|  | ie->data.ssp_mode = (ev->features[0] & LMP_HOST_SSP); | 
|  |  | 
|  | if (ev->features[0] & LMP_HOST_SSP) { | 
|  | set_bit(HCI_CONN_SSP_ENABLED, &conn->flags); | 
|  | } else { | 
|  | /* It is mandatory by the Bluetooth specification that | 
|  | * Extended Inquiry Results are only used when Secure | 
|  | * Simple Pairing is enabled, but some devices violate | 
|  | * this. | 
|  | * | 
|  | * To make these devices work, the internal SSP | 
|  | * enabled flag needs to be cleared if the remote host | 
|  | * features do not indicate SSP support */ | 
|  | clear_bit(HCI_CONN_SSP_ENABLED, &conn->flags); | 
|  | } | 
|  |  | 
|  | if (ev->features[0] & LMP_HOST_SC) | 
|  | set_bit(HCI_CONN_SC_ENABLED, &conn->flags); | 
|  | } | 
|  |  | 
|  | if (conn->state != BT_CONFIG) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) { | 
|  | struct hci_cp_remote_name_req cp; | 
|  | memset(&cp, 0, sizeof(cp)); | 
|  | bacpy(&cp.bdaddr, &conn->dst); | 
|  | cp.pscan_rep_mode = 0x02; | 
|  | hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp); | 
|  | } else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) | 
|  | mgmt_device_connected(hdev, conn, 0, NULL, 0); | 
|  |  | 
|  | if (!hci_outgoing_auth_needed(hdev, conn)) { | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_sync_conn_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_sync_conn_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr); | 
|  | if (!conn) { | 
|  | if (ev->link_type == ESCO_LINK) | 
|  | goto unlock; | 
|  |  | 
|  | /* When the link type in the event indicates SCO connection | 
|  | * and lookup of the connection object fails, then check | 
|  | * if an eSCO connection object exists. | 
|  | * | 
|  | * The core limits the synchronous connections to either | 
|  | * SCO or eSCO. The eSCO connection is preferred and tried | 
|  | * to be setup first and until successfully established, | 
|  | * the link type will be hinted as eSCO. | 
|  | */ | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | switch (ev->status) { | 
|  | case 0x00: | 
|  | conn->handle = __le16_to_cpu(ev->handle); | 
|  | conn->state  = BT_CONNECTED; | 
|  | conn->type   = ev->link_type; | 
|  |  | 
|  | hci_debugfs_create_conn(conn); | 
|  | hci_conn_add_sysfs(conn); | 
|  | break; | 
|  |  | 
|  | case 0x10:	/* Connection Accept Timeout */ | 
|  | case 0x0d:	/* Connection Rejected due to Limited Resources */ | 
|  | case 0x11:	/* Unsupported Feature or Parameter Value */ | 
|  | case 0x1c:	/* SCO interval rejected */ | 
|  | case 0x1a:	/* Unsupported Remote Feature */ | 
|  | case 0x1f:	/* Unspecified error */ | 
|  | case 0x20:	/* Unsupported LMP Parameter value */ | 
|  | if (conn->out) { | 
|  | conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | | 
|  | (hdev->esco_type & EDR_ESCO_MASK); | 
|  | if (hci_setup_sync(conn, conn->link->handle)) | 
|  | goto unlock; | 
|  | } | 
|  | /* fall through */ | 
|  |  | 
|  | default: | 
|  | conn->state = BT_CLOSED; | 
|  | break; | 
|  | } | 
|  |  | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | if (ev->status) | 
|  | hci_conn_del(conn); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static inline size_t eir_get_length(u8 *eir, size_t eir_len) | 
|  | { | 
|  | size_t parsed = 0; | 
|  |  | 
|  | while (parsed < eir_len) { | 
|  | u8 field_len = eir[0]; | 
|  |  | 
|  | if (field_len == 0) | 
|  | return parsed; | 
|  |  | 
|  | parsed += field_len + 1; | 
|  | eir += field_len + 1; | 
|  | } | 
|  |  | 
|  | return eir_len; | 
|  | } | 
|  |  | 
|  | static void hci_extended_inquiry_result_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct inquiry_data data; | 
|  | struct extended_inquiry_info *info = (void *) (skb->data + 1); | 
|  | int num_rsp = *((__u8 *) skb->data); | 
|  | size_t eir_len; | 
|  |  | 
|  | BT_DBG("%s num_rsp %d", hdev->name, num_rsp); | 
|  |  | 
|  | if (!num_rsp) | 
|  | return; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ)) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | for (; num_rsp; num_rsp--, info++) { | 
|  | u32 flags; | 
|  | bool name_known; | 
|  |  | 
|  | bacpy(&data.bdaddr, &info->bdaddr); | 
|  | data.pscan_rep_mode	= info->pscan_rep_mode; | 
|  | data.pscan_period_mode	= info->pscan_period_mode; | 
|  | data.pscan_mode		= 0x00; | 
|  | memcpy(data.dev_class, info->dev_class, 3); | 
|  | data.clock_offset	= info->clock_offset; | 
|  | data.rssi		= info->rssi; | 
|  | data.ssp_mode		= 0x01; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | name_known = eir_get_data(info->data, | 
|  | sizeof(info->data), | 
|  | EIR_NAME_COMPLETE, NULL); | 
|  | else | 
|  | name_known = true; | 
|  |  | 
|  | flags = hci_inquiry_cache_update(hdev, &data, name_known); | 
|  |  | 
|  | eir_len = eir_get_length(info->data, sizeof(info->data)); | 
|  |  | 
|  | mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, | 
|  | info->dev_class, info->rssi, | 
|  | flags, info->data, eir_len, NULL, 0); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_key_refresh_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_key_refresh_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x handle 0x%4.4x", hdev->name, ev->status, | 
|  | __le16_to_cpu(ev->handle)); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | /* For BR/EDR the necessary steps are taken through the | 
|  | * auth_complete event. | 
|  | */ | 
|  | if (conn->type != LE_LINK) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ev->status) | 
|  | conn->sec_level = conn->pending_sec_level; | 
|  |  | 
|  | clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags); | 
|  |  | 
|  | if (ev->status && conn->state == BT_CONNECTED) { | 
|  | hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE); | 
|  | hci_conn_drop(conn); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (conn->state == BT_CONFIG) { | 
|  | if (!ev->status) | 
|  | conn->state = BT_CONNECTED; | 
|  |  | 
|  | hci_connect_cfm(conn, ev->status); | 
|  | hci_conn_drop(conn); | 
|  | } else { | 
|  | hci_auth_cfm(conn, ev->status); | 
|  |  | 
|  | hci_conn_hold(conn); | 
|  | conn->disc_timeout = HCI_DISCONN_TIMEOUT; | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static u8 hci_get_auth_req(struct hci_conn *conn) | 
|  | { | 
|  | /* If remote requests no-bonding follow that lead */ | 
|  | if (conn->remote_auth == HCI_AT_NO_BONDING || | 
|  | conn->remote_auth == HCI_AT_NO_BONDING_MITM) | 
|  | return conn->remote_auth | (conn->auth_type & 0x01); | 
|  |  | 
|  | /* If both remote and local have enough IO capabilities, require | 
|  | * MITM protection | 
|  | */ | 
|  | if (conn->remote_cap != HCI_IO_NO_INPUT_OUTPUT && | 
|  | conn->io_capability != HCI_IO_NO_INPUT_OUTPUT) | 
|  | return conn->remote_auth | 0x01; | 
|  |  | 
|  | /* No MITM protection possible so ignore remote requirement */ | 
|  | return (conn->remote_auth & ~0x01) | (conn->auth_type & 0x01); | 
|  | } | 
|  |  | 
|  | static u8 bredr_oob_data_present(struct hci_conn *conn) | 
|  | { | 
|  | struct hci_dev *hdev = conn->hdev; | 
|  | struct oob_data *data; | 
|  |  | 
|  | data = hci_find_remote_oob_data(hdev, &conn->dst, BDADDR_BREDR); | 
|  | if (!data) | 
|  | return 0x00; | 
|  |  | 
|  | if (bredr_sc_enabled(hdev)) { | 
|  | /* When Secure Connections is enabled, then just | 
|  | * return the present value stored with the OOB | 
|  | * data. The stored value contains the right present | 
|  | * information. However it can only be trusted when | 
|  | * not in Secure Connection Only mode. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_SC_ONLY)) | 
|  | return data->present; | 
|  |  | 
|  | /* When Secure Connections Only mode is enabled, then | 
|  | * the P-256 values are required. If they are not | 
|  | * available, then do not declare that OOB data is | 
|  | * present. | 
|  | */ | 
|  | if (!memcmp(data->rand256, ZERO_KEY, 16) || | 
|  | !memcmp(data->hash256, ZERO_KEY, 16)) | 
|  | return 0x00; | 
|  |  | 
|  | return 0x02; | 
|  | } | 
|  |  | 
|  | /* When Secure Connections is not enabled or actually | 
|  | * not supported by the hardware, then check that if | 
|  | * P-192 data values are present. | 
|  | */ | 
|  | if (!memcmp(data->rand192, ZERO_KEY, 16) || | 
|  | !memcmp(data->hash192, ZERO_KEY, 16)) | 
|  | return 0x00; | 
|  |  | 
|  | return 0x01; | 
|  | } | 
|  |  | 
|  | static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_io_capa_request *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | hci_conn_hold(conn); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | goto unlock; | 
|  |  | 
|  | /* Allow pairing if we're pairable, the initiators of the | 
|  | * pairing or if the remote is not requesting bonding. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_BONDABLE) || | 
|  | test_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags) || | 
|  | (conn->remote_auth & ~0x01) == HCI_AT_NO_BONDING) { | 
|  | struct hci_cp_io_capability_reply cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | /* Change the IO capability from KeyboardDisplay | 
|  | * to DisplayYesNo as it is not supported by BT spec. */ | 
|  | cp.capability = (conn->io_capability == 0x04) ? | 
|  | HCI_IO_DISPLAY_YESNO : conn->io_capability; | 
|  |  | 
|  | /* If we are initiators, there is no remote information yet */ | 
|  | if (conn->remote_auth == 0xff) { | 
|  | /* Request MITM protection if our IO caps allow it | 
|  | * except for the no-bonding case. | 
|  | */ | 
|  | if (conn->io_capability != HCI_IO_NO_INPUT_OUTPUT && | 
|  | conn->auth_type != HCI_AT_NO_BONDING) | 
|  | conn->auth_type |= 0x01; | 
|  | } else { | 
|  | conn->auth_type = hci_get_auth_req(conn); | 
|  | } | 
|  |  | 
|  | /* If we're not bondable, force one of the non-bondable | 
|  | * authentication requirement values. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_BONDABLE)) | 
|  | conn->auth_type &= HCI_AT_NO_BONDING_MITM; | 
|  |  | 
|  | cp.authentication = conn->auth_type; | 
|  | cp.oob_data = bredr_oob_data_present(conn); | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_REPLY, | 
|  | sizeof(cp), &cp); | 
|  | } else { | 
|  | struct hci_cp_io_capability_neg_reply cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | cp.reason = HCI_ERROR_PAIRING_NOT_ALLOWED; | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_NEG_REPLY, | 
|  | sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_io_capa_reply_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_io_capa_reply *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | conn->remote_cap = ev->capability; | 
|  | conn->remote_auth = ev->authentication; | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_user_confirm_request_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_user_confirm_req *ev = (void *) skb->data; | 
|  | int loc_mitm, rem_mitm, confirm_hint = 0; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | goto unlock; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | loc_mitm = (conn->auth_type & 0x01); | 
|  | rem_mitm = (conn->remote_auth & 0x01); | 
|  |  | 
|  | /* If we require MITM but the remote device can't provide that | 
|  | * (it has NoInputNoOutput) then reject the confirmation | 
|  | * request. We check the security level here since it doesn't | 
|  | * necessarily match conn->auth_type. | 
|  | */ | 
|  | if (conn->pending_sec_level > BT_SECURITY_MEDIUM && | 
|  | conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) { | 
|  | BT_DBG("Rejecting request: remote device can't provide MITM"); | 
|  | hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_NEG_REPLY, | 
|  | sizeof(ev->bdaddr), &ev->bdaddr); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* If no side requires MITM protection; auto-accept */ | 
|  | if ((!loc_mitm || conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) && | 
|  | (!rem_mitm || conn->io_capability == HCI_IO_NO_INPUT_OUTPUT)) { | 
|  |  | 
|  | /* If we're not the initiators request authorization to | 
|  | * proceed from user space (mgmt_user_confirm with | 
|  | * confirm_hint set to 1). The exception is if neither | 
|  | * side had MITM or if the local IO capability is | 
|  | * NoInputNoOutput, in which case we do auto-accept | 
|  | */ | 
|  | if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) && | 
|  | conn->io_capability != HCI_IO_NO_INPUT_OUTPUT && | 
|  | (loc_mitm || rem_mitm)) { | 
|  | BT_DBG("Confirming auto-accept as acceptor"); | 
|  | confirm_hint = 1; | 
|  | goto confirm; | 
|  | } | 
|  |  | 
|  | BT_DBG("Auto-accept of user confirmation with %ums delay", | 
|  | hdev->auto_accept_delay); | 
|  |  | 
|  | if (hdev->auto_accept_delay > 0) { | 
|  | int delay = msecs_to_jiffies(hdev->auto_accept_delay); | 
|  | queue_delayed_work(conn->hdev->workqueue, | 
|  | &conn->auto_accept_work, delay); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_REPLY, | 
|  | sizeof(ev->bdaddr), &ev->bdaddr); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | confirm: | 
|  | mgmt_user_confirm_request(hdev, &ev->bdaddr, ACL_LINK, 0, | 
|  | le32_to_cpu(ev->passkey), confirm_hint); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_user_passkey_request_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_user_passkey_req *ev = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_passkey_request(hdev, &ev->bdaddr, ACL_LINK, 0); | 
|  | } | 
|  |  | 
|  | static void hci_user_passkey_notify_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_user_passkey_notify *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | return; | 
|  |  | 
|  | conn->passkey_notify = __le32_to_cpu(ev->passkey); | 
|  | conn->passkey_entered = 0; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_passkey_notify(hdev, &conn->dst, conn->type, | 
|  | conn->dst_type, conn->passkey_notify, | 
|  | conn->passkey_entered); | 
|  | } | 
|  |  | 
|  | static void hci_keypress_notify_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_keypress_notify *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | return; | 
|  |  | 
|  | switch (ev->type) { | 
|  | case HCI_KEYPRESS_STARTED: | 
|  | conn->passkey_entered = 0; | 
|  | return; | 
|  |  | 
|  | case HCI_KEYPRESS_ENTERED: | 
|  | conn->passkey_entered++; | 
|  | break; | 
|  |  | 
|  | case HCI_KEYPRESS_ERASED: | 
|  | conn->passkey_entered--; | 
|  | break; | 
|  |  | 
|  | case HCI_KEYPRESS_CLEARED: | 
|  | conn->passkey_entered = 0; | 
|  | break; | 
|  |  | 
|  | case HCI_KEYPRESS_COMPLETED: | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | mgmt_user_passkey_notify(hdev, &conn->dst, conn->type, | 
|  | conn->dst_type, conn->passkey_notify, | 
|  | conn->passkey_entered); | 
|  | } | 
|  |  | 
|  | static void hci_simple_pair_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_simple_pair_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (!conn) | 
|  | goto unlock; | 
|  |  | 
|  | /* Reset the authentication requirement to unknown */ | 
|  | conn->remote_auth = 0xff; | 
|  |  | 
|  | /* To avoid duplicate auth_failed events to user space we check | 
|  | * the HCI_CONN_AUTH_PEND flag which will be set if we | 
|  | * initiated the authentication. A traditional auth_complete | 
|  | * event gets always produced as initiator and is also mapped to | 
|  | * the mgmt_auth_failed event */ | 
|  | if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) && ev->status) | 
|  | mgmt_auth_failed(conn, ev->status); | 
|  |  | 
|  | hci_conn_drop(conn); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_remote_host_features_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_remote_host_features *ev = (void *) skb->data; | 
|  | struct inquiry_entry *ie; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); | 
|  | if (conn) | 
|  | memcpy(conn->features[1], ev->features, 8); | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr); | 
|  | if (ie) | 
|  | ie->data.ssp_mode = (ev->features[0] & LMP_HOST_SSP); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_remote_oob_data_request_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_remote_oob_data_request *ev = (void *) skb->data; | 
|  | struct oob_data *data; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | goto unlock; | 
|  |  | 
|  | data = hci_find_remote_oob_data(hdev, &ev->bdaddr, BDADDR_BREDR); | 
|  | if (!data) { | 
|  | struct hci_cp_remote_oob_data_neg_reply cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_NEG_REPLY, | 
|  | sizeof(cp), &cp); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (bredr_sc_enabled(hdev)) { | 
|  | struct hci_cp_remote_oob_ext_data_reply cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | if (hci_dev_test_flag(hdev, HCI_SC_ONLY)) { | 
|  | memset(cp.hash192, 0, sizeof(cp.hash192)); | 
|  | memset(cp.rand192, 0, sizeof(cp.rand192)); | 
|  | } else { | 
|  | memcpy(cp.hash192, data->hash192, sizeof(cp.hash192)); | 
|  | memcpy(cp.rand192, data->rand192, sizeof(cp.rand192)); | 
|  | } | 
|  | memcpy(cp.hash256, data->hash256, sizeof(cp.hash256)); | 
|  | memcpy(cp.rand256, data->rand256, sizeof(cp.rand256)); | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_EXT_DATA_REPLY, | 
|  | sizeof(cp), &cp); | 
|  | } else { | 
|  | struct hci_cp_remote_oob_data_reply cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, &ev->bdaddr); | 
|  | memcpy(cp.hash, data->hash192, sizeof(cp.hash)); | 
|  | memcpy(cp.rand, data->rand192, sizeof(cp.rand)); | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_REPLY, | 
|  | sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BT_HS) | 
|  | static void hci_chan_selected_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_channel_selected *ev = (void *)skb->data; | 
|  | struct hci_conn *hcon; | 
|  |  | 
|  | BT_DBG("%s handle 0x%2.2x", hdev->name, ev->phy_handle); | 
|  |  | 
|  | skb_pull(skb, sizeof(*ev)); | 
|  |  | 
|  | hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle); | 
|  | if (!hcon) | 
|  | return; | 
|  |  | 
|  | amp_read_loc_assoc_final_data(hdev, hcon); | 
|  | } | 
|  |  | 
|  | static void hci_phy_link_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_phy_link_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *hcon, *bredr_hcon; | 
|  |  | 
|  | BT_DBG("%s handle 0x%2.2x status 0x%2.2x", hdev->name, ev->phy_handle, | 
|  | ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle); | 
|  | if (!hcon) { | 
|  | hci_dev_unlock(hdev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ev->status) { | 
|  | hci_conn_del(hcon); | 
|  | hci_dev_unlock(hdev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon; | 
|  |  | 
|  | hcon->state = BT_CONNECTED; | 
|  | bacpy(&hcon->dst, &bredr_hcon->dst); | 
|  |  | 
|  | hci_conn_hold(hcon); | 
|  | hcon->disc_timeout = HCI_DISCONN_TIMEOUT; | 
|  | hci_conn_drop(hcon); | 
|  |  | 
|  | hci_debugfs_create_conn(hcon); | 
|  | hci_conn_add_sysfs(hcon); | 
|  |  | 
|  | amp_physical_cfm(bredr_hcon, hcon); | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_loglink_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_logical_link_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *hcon; | 
|  | struct hci_chan *hchan; | 
|  | struct amp_mgr *mgr; | 
|  |  | 
|  | BT_DBG("%s log_handle 0x%4.4x phy_handle 0x%2.2x status 0x%2.2x", | 
|  | hdev->name, le16_to_cpu(ev->handle), ev->phy_handle, | 
|  | ev->status); | 
|  |  | 
|  | hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle); | 
|  | if (!hcon) | 
|  | return; | 
|  |  | 
|  | /* Create AMP hchan */ | 
|  | hchan = hci_chan_create(hcon); | 
|  | if (!hchan) | 
|  | return; | 
|  |  | 
|  | hchan->handle = le16_to_cpu(ev->handle); | 
|  |  | 
|  | BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan); | 
|  |  | 
|  | mgr = hcon->amp_mgr; | 
|  | if (mgr && mgr->bredr_chan) { | 
|  | struct l2cap_chan *bredr_chan = mgr->bredr_chan; | 
|  |  | 
|  | l2cap_chan_lock(bredr_chan); | 
|  |  | 
|  | bredr_chan->conn->mtu = hdev->block_mtu; | 
|  | l2cap_logical_cfm(bredr_chan, hchan, 0); | 
|  | hci_conn_hold(hcon); | 
|  |  | 
|  | l2cap_chan_unlock(bredr_chan); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_disconn_loglink_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_disconn_logical_link_complete *ev = (void *) skb->data; | 
|  | struct hci_chan *hchan; | 
|  |  | 
|  | BT_DBG("%s log handle 0x%4.4x status 0x%2.2x", hdev->name, | 
|  | le16_to_cpu(ev->handle), ev->status); | 
|  |  | 
|  | if (ev->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle)); | 
|  | if (!hchan) | 
|  | goto unlock; | 
|  |  | 
|  | amp_destroy_logical_link(hchan, ev->reason); | 
|  |  | 
|  | unlock: | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_disconn_phy_link_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *hcon; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | if (ev->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle); | 
|  | if (hcon) { | 
|  | hcon->state = BT_CLOSED; | 
|  | hci_conn_del(hcon); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void le_conn_complete_evt(struct hci_dev *hdev, u8 status, | 
|  | bdaddr_t *bdaddr, u8 bdaddr_type, u8 role, u16 handle, | 
|  | u16 interval, u16 latency, u16 supervision_timeout) | 
|  | { | 
|  | struct hci_conn_params *params; | 
|  | struct hci_conn *conn; | 
|  | struct smp_irk *irk; | 
|  | u8 addr_type; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | /* All controllers implicitly stop advertising in the event of a | 
|  | * connection, so ensure that the state bit is cleared. | 
|  | */ | 
|  | hci_dev_clear_flag(hdev, HCI_LE_ADV); | 
|  |  | 
|  | conn = hci_lookup_le_connect(hdev); | 
|  | if (!conn) { | 
|  | conn = hci_conn_add(hdev, LE_LINK, bdaddr, role); | 
|  | if (!conn) { | 
|  | bt_dev_err(hdev, "no memory for new connection"); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | conn->dst_type = bdaddr_type; | 
|  |  | 
|  | /* If we didn't have a hci_conn object previously | 
|  | * but we're in master role this must be something | 
|  | * initiated using a white list. Since white list based | 
|  | * connections are not "first class citizens" we don't | 
|  | * have full tracking of them. Therefore, we go ahead | 
|  | * with a "best effort" approach of determining the | 
|  | * initiator address based on the HCI_PRIVACY flag. | 
|  | */ | 
|  | if (conn->out) { | 
|  | conn->resp_addr_type = bdaddr_type; | 
|  | bacpy(&conn->resp_addr, bdaddr); | 
|  | if (hci_dev_test_flag(hdev, HCI_PRIVACY)) { | 
|  | conn->init_addr_type = ADDR_LE_DEV_RANDOM; | 
|  | bacpy(&conn->init_addr, &hdev->rpa); | 
|  | } else { | 
|  | hci_copy_identity_address(hdev, | 
|  | &conn->init_addr, | 
|  | &conn->init_addr_type); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | cancel_delayed_work(&conn->le_conn_timeout); | 
|  | } | 
|  |  | 
|  | if (!conn->out) { | 
|  | /* Set the responder (our side) address type based on | 
|  | * the advertising address type. | 
|  | */ | 
|  | conn->resp_addr_type = hdev->adv_addr_type; | 
|  | if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) { | 
|  | /* In case of ext adv, resp_addr will be updated in | 
|  | * Adv Terminated event. | 
|  | */ | 
|  | if (!ext_adv_capable(hdev)) | 
|  | bacpy(&conn->resp_addr, &hdev->random_addr); | 
|  | } else { | 
|  | bacpy(&conn->resp_addr, &hdev->bdaddr); | 
|  | } | 
|  |  | 
|  | conn->init_addr_type = bdaddr_type; | 
|  | bacpy(&conn->init_addr, bdaddr); | 
|  |  | 
|  | /* For incoming connections, set the default minimum | 
|  | * and maximum connection interval. They will be used | 
|  | * to check if the parameters are in range and if not | 
|  | * trigger the connection update procedure. | 
|  | */ | 
|  | conn->le_conn_min_interval = hdev->le_conn_min_interval; | 
|  | conn->le_conn_max_interval = hdev->le_conn_max_interval; | 
|  | } | 
|  |  | 
|  | /* Lookup the identity address from the stored connection | 
|  | * address and address type. | 
|  | * | 
|  | * When establishing connections to an identity address, the | 
|  | * connection procedure will store the resolvable random | 
|  | * address first. Now if it can be converted back into the | 
|  | * identity address, start using the identity address from | 
|  | * now on. | 
|  | */ | 
|  | irk = hci_get_irk(hdev, &conn->dst, conn->dst_type); | 
|  | if (irk) { | 
|  | bacpy(&conn->dst, &irk->bdaddr); | 
|  | conn->dst_type = irk->addr_type; | 
|  | } | 
|  |  | 
|  | if (status) { | 
|  | hci_le_conn_failed(conn, status); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (conn->dst_type == ADDR_LE_DEV_PUBLIC) | 
|  | addr_type = BDADDR_LE_PUBLIC; | 
|  | else | 
|  | addr_type = BDADDR_LE_RANDOM; | 
|  |  | 
|  | /* Drop the connection if the device is blocked */ | 
|  | if (hci_bdaddr_list_lookup(&hdev->blacklist, &conn->dst, addr_type)) { | 
|  | hci_conn_drop(conn); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) | 
|  | mgmt_device_connected(hdev, conn, 0, NULL, 0); | 
|  |  | 
|  | conn->sec_level = BT_SECURITY_LOW; | 
|  | conn->handle = handle; | 
|  | conn->state = BT_CONFIG; | 
|  |  | 
|  | conn->le_conn_interval = interval; | 
|  | conn->le_conn_latency = latency; | 
|  | conn->le_supv_timeout = supervision_timeout; | 
|  |  | 
|  | hci_debugfs_create_conn(conn); | 
|  | hci_conn_add_sysfs(conn); | 
|  |  | 
|  | if (!status) { | 
|  | /* The remote features procedure is defined for master | 
|  | * role only. So only in case of an initiated connection | 
|  | * request the remote features. | 
|  | * | 
|  | * If the local controller supports slave-initiated features | 
|  | * exchange, then requesting the remote features in slave | 
|  | * role is possible. Otherwise just transition into the | 
|  | * connected state without requesting the remote features. | 
|  | */ | 
|  | if (conn->out || | 
|  | (hdev->le_features[0] & HCI_LE_SLAVE_FEATURES)) { | 
|  | struct hci_cp_le_read_remote_features cp; | 
|  |  | 
|  | cp.handle = __cpu_to_le16(conn->handle); | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_LE_READ_REMOTE_FEATURES, | 
|  | sizeof(cp), &cp); | 
|  |  | 
|  | hci_conn_hold(conn); | 
|  | } else { | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, status); | 
|  | } | 
|  | } else { | 
|  | hci_connect_cfm(conn, status); | 
|  | } | 
|  |  | 
|  | params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst, | 
|  | conn->dst_type); | 
|  | if (params) { | 
|  | list_del_init(¶ms->action); | 
|  | if (params->conn) { | 
|  | hci_conn_drop(params->conn); | 
|  | hci_conn_put(params->conn); | 
|  | params->conn = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | hci_update_background_scan(hdev); | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_conn_complete *ev = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type, | 
|  | ev->role, le16_to_cpu(ev->handle), | 
|  | le16_to_cpu(ev->interval), | 
|  | le16_to_cpu(ev->latency), | 
|  | le16_to_cpu(ev->supervision_timeout)); | 
|  | } | 
|  |  | 
|  | static void hci_le_enh_conn_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_enh_conn_complete *ev = (void *) skb->data; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type, | 
|  | ev->role, le16_to_cpu(ev->handle), | 
|  | le16_to_cpu(ev->interval), | 
|  | le16_to_cpu(ev->latency), | 
|  | le16_to_cpu(ev->supervision_timeout)); | 
|  | } | 
|  |  | 
|  | static void hci_le_ext_adv_term_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_evt_le_ext_adv_set_term *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | if (ev->status) | 
|  | return; | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->conn_handle)); | 
|  | if (conn) { | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | if (hdev->adv_addr_type != ADDR_LE_DEV_RANDOM) | 
|  | return; | 
|  |  | 
|  | if (!hdev->cur_adv_instance) { | 
|  | bacpy(&conn->resp_addr, &hdev->random_addr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | adv_instance = hci_find_adv_instance(hdev, hdev->cur_adv_instance); | 
|  | if (adv_instance) | 
|  | bacpy(&conn->resp_addr, &adv_instance->random_addr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_le_conn_update_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_conn_update_complete *ev = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | if (ev->status) | 
|  | return; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn) { | 
|  | conn->le_conn_interval = le16_to_cpu(ev->interval); | 
|  | conn->le_conn_latency = le16_to_cpu(ev->latency); | 
|  | conn->le_supv_timeout = le16_to_cpu(ev->supervision_timeout); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev, | 
|  | bdaddr_t *addr, | 
|  | u8 addr_type, u8 adv_type, | 
|  | bdaddr_t *direct_rpa) | 
|  | { | 
|  | struct hci_conn *conn; | 
|  | struct hci_conn_params *params; | 
|  |  | 
|  | /* If the event is not connectable don't proceed further */ | 
|  | if (adv_type != LE_ADV_IND && adv_type != LE_ADV_DIRECT_IND) | 
|  | return NULL; | 
|  |  | 
|  | /* Ignore if the device is blocked */ | 
|  | if (hci_bdaddr_list_lookup(&hdev->blacklist, addr, addr_type)) | 
|  | return NULL; | 
|  |  | 
|  | /* Most controller will fail if we try to create new connections | 
|  | * while we have an existing one in slave role. | 
|  | */ | 
|  | if (hdev->conn_hash.le_num_slave > 0) | 
|  | return NULL; | 
|  |  | 
|  | /* If we're not connectable only connect devices that we have in | 
|  | * our pend_le_conns list. | 
|  | */ | 
|  | params = hci_pend_le_action_lookup(&hdev->pend_le_conns, addr, | 
|  | addr_type); | 
|  | if (!params) | 
|  | return NULL; | 
|  |  | 
|  | if (!params->explicit_connect) { | 
|  | switch (params->auto_connect) { | 
|  | case HCI_AUTO_CONN_DIRECT: | 
|  | /* Only devices advertising with ADV_DIRECT_IND are | 
|  | * triggering a connection attempt. This is allowing | 
|  | * incoming connections from slave devices. | 
|  | */ | 
|  | if (adv_type != LE_ADV_DIRECT_IND) | 
|  | return NULL; | 
|  | break; | 
|  | case HCI_AUTO_CONN_ALWAYS: | 
|  | /* Devices advertising with ADV_IND or ADV_DIRECT_IND | 
|  | * are triggering a connection attempt. This means | 
|  | * that incoming connectioms from slave device are | 
|  | * accepted and also outgoing connections to slave | 
|  | * devices are established when found. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | conn = hci_connect_le(hdev, addr, addr_type, BT_SECURITY_LOW, | 
|  | HCI_LE_AUTOCONN_TIMEOUT, HCI_ROLE_MASTER, | 
|  | direct_rpa); | 
|  | if (!IS_ERR(conn)) { | 
|  | /* If HCI_AUTO_CONN_EXPLICIT is set, conn is already owned | 
|  | * by higher layer that tried to connect, if no then | 
|  | * store the pointer since we don't really have any | 
|  | * other owner of the object besides the params that | 
|  | * triggered it. This way we can abort the connection if | 
|  | * the parameters get removed and keep the reference | 
|  | * count consistent once the connection is established. | 
|  | */ | 
|  |  | 
|  | if (!params->explicit_connect) | 
|  | params->conn = hci_conn_get(conn); | 
|  |  | 
|  | return conn; | 
|  | } | 
|  |  | 
|  | switch (PTR_ERR(conn)) { | 
|  | case -EBUSY: | 
|  | /* If hci_connect() returns -EBUSY it means there is already | 
|  | * an LE connection attempt going on. Since controllers don't | 
|  | * support more than one connection attempt at the time, we | 
|  | * don't consider this an error case. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | BT_DBG("Failed to connect: err %ld", PTR_ERR(conn)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr, | 
|  | u8 bdaddr_type, bdaddr_t *direct_addr, | 
|  | u8 direct_addr_type, s8 rssi, u8 *data, u8 len) | 
|  | { | 
|  | struct discovery_state *d = &hdev->discovery; | 
|  | struct smp_irk *irk; | 
|  | struct hci_conn *conn; | 
|  | bool match; | 
|  | u32 flags; | 
|  | u8 *ptr, real_len; | 
|  |  | 
|  | switch (type) { | 
|  | case LE_ADV_IND: | 
|  | case LE_ADV_DIRECT_IND: | 
|  | case LE_ADV_SCAN_IND: | 
|  | case LE_ADV_NONCONN_IND: | 
|  | case LE_ADV_SCAN_RSP: | 
|  | break; | 
|  | default: | 
|  | bt_dev_err_ratelimited(hdev, "unknown advertising packet " | 
|  | "type: 0x%02x", type); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Find the end of the data in case the report contains padded zero | 
|  | * bytes at the end causing an invalid length value. | 
|  | * | 
|  | * When data is NULL, len is 0 so there is no need for extra ptr | 
|  | * check as 'ptr < data + 0' is already false in such case. | 
|  | */ | 
|  | for (ptr = data; ptr < data + len && *ptr; ptr += *ptr + 1) { | 
|  | if (ptr + 1 + *ptr > data + len) | 
|  | break; | 
|  | } | 
|  |  | 
|  | real_len = ptr - data; | 
|  |  | 
|  | /* Adjust for actual length */ | 
|  | if (len != real_len) { | 
|  | bt_dev_err_ratelimited(hdev, "advertising data len corrected"); | 
|  | len = real_len; | 
|  | } | 
|  |  | 
|  | /* If the direct address is present, then this report is from | 
|  | * a LE Direct Advertising Report event. In that case it is | 
|  | * important to see if the address is matching the local | 
|  | * controller address. | 
|  | */ | 
|  | if (direct_addr) { | 
|  | /* Only resolvable random addresses are valid for these | 
|  | * kind of reports and others can be ignored. | 
|  | */ | 
|  | if (!hci_bdaddr_is_rpa(direct_addr, direct_addr_type)) | 
|  | return; | 
|  |  | 
|  | /* If the controller is not using resolvable random | 
|  | * addresses, then this report can be ignored. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_PRIVACY)) | 
|  | return; | 
|  |  | 
|  | /* If the local IRK of the controller does not match | 
|  | * with the resolvable random address provided, then | 
|  | * this report can be ignored. | 
|  | */ | 
|  | if (!smp_irk_matches(hdev, hdev->irk, direct_addr)) | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Check if we need to convert to identity address */ | 
|  | irk = hci_get_irk(hdev, bdaddr, bdaddr_type); | 
|  | if (irk) { | 
|  | bdaddr = &irk->bdaddr; | 
|  | bdaddr_type = irk->addr_type; | 
|  | } | 
|  |  | 
|  | /* Check if we have been requested to connect to this device. | 
|  | * | 
|  | * direct_addr is set only for directed advertising reports (it is NULL | 
|  | * for advertising reports) and is already verified to be RPA above. | 
|  | */ | 
|  | conn = check_pending_le_conn(hdev, bdaddr, bdaddr_type, type, | 
|  | direct_addr); | 
|  | if (conn && type == LE_ADV_IND) { | 
|  | /* Store report for later inclusion by | 
|  | * mgmt_device_connected | 
|  | */ | 
|  | memcpy(conn->le_adv_data, data, len); | 
|  | conn->le_adv_data_len = len; | 
|  | } | 
|  |  | 
|  | /* Passive scanning shouldn't trigger any device found events, | 
|  | * except for devices marked as CONN_REPORT for which we do send | 
|  | * device found events. | 
|  | */ | 
|  | if (hdev->le_scan_type == LE_SCAN_PASSIVE) { | 
|  | if (type == LE_ADV_DIRECT_IND) | 
|  | return; | 
|  |  | 
|  | if (!hci_pend_le_action_lookup(&hdev->pend_le_reports, | 
|  | bdaddr, bdaddr_type)) | 
|  | return; | 
|  |  | 
|  | if (type == LE_ADV_NONCONN_IND || type == LE_ADV_SCAN_IND) | 
|  | flags = MGMT_DEV_FOUND_NOT_CONNECTABLE; | 
|  | else | 
|  | flags = 0; | 
|  | mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL, | 
|  | rssi, flags, data, len, NULL, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* When receiving non-connectable or scannable undirected | 
|  | * advertising reports, this means that the remote device is | 
|  | * not connectable and then clearly indicate this in the | 
|  | * device found event. | 
|  | * | 
|  | * When receiving a scan response, then there is no way to | 
|  | * know if the remote device is connectable or not. However | 
|  | * since scan responses are merged with a previously seen | 
|  | * advertising report, the flags field from that report | 
|  | * will be used. | 
|  | * | 
|  | * In the really unlikely case that a controller get confused | 
|  | * and just sends a scan response event, then it is marked as | 
|  | * not connectable as well. | 
|  | */ | 
|  | if (type == LE_ADV_NONCONN_IND || type == LE_ADV_SCAN_IND || | 
|  | type == LE_ADV_SCAN_RSP) | 
|  | flags = MGMT_DEV_FOUND_NOT_CONNECTABLE; | 
|  | else | 
|  | flags = 0; | 
|  |  | 
|  | /* If there's nothing pending either store the data from this | 
|  | * event or send an immediate device found event if the data | 
|  | * should not be stored for later. | 
|  | */ | 
|  | if (!has_pending_adv_report(hdev)) { | 
|  | /* If the report will trigger a SCAN_REQ store it for | 
|  | * later merging. | 
|  | */ | 
|  | if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) { | 
|  | store_pending_adv_report(hdev, bdaddr, bdaddr_type, | 
|  | rssi, flags, data, len); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL, | 
|  | rssi, flags, data, len, NULL, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Check if the pending report is for the same device as the new one */ | 
|  | match = (!bacmp(bdaddr, &d->last_adv_addr) && | 
|  | bdaddr_type == d->last_adv_addr_type); | 
|  |  | 
|  | /* If the pending data doesn't match this report or this isn't a | 
|  | * scan response (e.g. we got a duplicate ADV_IND) then force | 
|  | * sending of the pending data. | 
|  | */ | 
|  | if (type != LE_ADV_SCAN_RSP || !match) { | 
|  | /* Send out whatever is in the cache, but skip duplicates */ | 
|  | if (!match) | 
|  | mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, | 
|  | d->last_adv_addr_type, NULL, | 
|  | d->last_adv_rssi, d->last_adv_flags, | 
|  | d->last_adv_data, | 
|  | d->last_adv_data_len, NULL, 0); | 
|  |  | 
|  | /* If the new report will trigger a SCAN_REQ store it for | 
|  | * later merging. | 
|  | */ | 
|  | if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) { | 
|  | store_pending_adv_report(hdev, bdaddr, bdaddr_type, | 
|  | rssi, flags, data, len); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* The advertising reports cannot be merged, so clear | 
|  | * the pending report and send out a device found event. | 
|  | */ | 
|  | clear_pending_adv_report(hdev); | 
|  | mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL, | 
|  | rssi, flags, data, len, NULL, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* If we get here we've got a pending ADV_IND or ADV_SCAN_IND and | 
|  | * the new event is a SCAN_RSP. We can therefore proceed with | 
|  | * sending a merged device found event. | 
|  | */ | 
|  | mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, | 
|  | d->last_adv_addr_type, NULL, rssi, d->last_adv_flags, | 
|  | d->last_adv_data, d->last_adv_data_len, data, len); | 
|  | clear_pending_adv_report(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | u8 num_reports = skb->data[0]; | 
|  | void *ptr = &skb->data[1]; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | while (num_reports--) { | 
|  | struct hci_ev_le_advertising_info *ev = ptr; | 
|  | s8 rssi; | 
|  |  | 
|  | if (ev->length <= HCI_MAX_AD_LENGTH) { | 
|  | rssi = ev->data[ev->length]; | 
|  | process_adv_report(hdev, ev->evt_type, &ev->bdaddr, | 
|  | ev->bdaddr_type, NULL, 0, rssi, | 
|  | ev->data, ev->length); | 
|  | } else { | 
|  | bt_dev_err(hdev, "Dropping invalid advertising data"); | 
|  | } | 
|  |  | 
|  | ptr += sizeof(*ev) + ev->length + 1; | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static u8 ext_evt_type_to_legacy(u16 evt_type) | 
|  | { | 
|  | if (evt_type & LE_EXT_ADV_LEGACY_PDU) { | 
|  | switch (evt_type) { | 
|  | case LE_LEGACY_ADV_IND: | 
|  | return LE_ADV_IND; | 
|  | case LE_LEGACY_ADV_DIRECT_IND: | 
|  | return LE_ADV_DIRECT_IND; | 
|  | case LE_LEGACY_ADV_SCAN_IND: | 
|  | return LE_ADV_SCAN_IND; | 
|  | case LE_LEGACY_NONCONN_IND: | 
|  | return LE_ADV_NONCONN_IND; | 
|  | case LE_LEGACY_SCAN_RSP_ADV: | 
|  | case LE_LEGACY_SCAN_RSP_ADV_SCAN: | 
|  | return LE_ADV_SCAN_RSP; | 
|  | } | 
|  |  | 
|  | BT_ERR_RATELIMITED("Unknown advertising packet type: 0x%02x", | 
|  | evt_type); | 
|  |  | 
|  | return LE_ADV_INVALID; | 
|  | } | 
|  |  | 
|  | if (evt_type & LE_EXT_ADV_CONN_IND) { | 
|  | if (evt_type & LE_EXT_ADV_DIRECT_IND) | 
|  | return LE_ADV_DIRECT_IND; | 
|  |  | 
|  | return LE_ADV_IND; | 
|  | } | 
|  |  | 
|  | if (evt_type & LE_EXT_ADV_SCAN_RSP) | 
|  | return LE_ADV_SCAN_RSP; | 
|  |  | 
|  | if (evt_type & LE_EXT_ADV_SCAN_IND) | 
|  | return LE_ADV_SCAN_IND; | 
|  |  | 
|  | if (evt_type == LE_EXT_ADV_NON_CONN_IND || | 
|  | evt_type & LE_EXT_ADV_DIRECT_IND) | 
|  | return LE_ADV_NONCONN_IND; | 
|  |  | 
|  | BT_ERR_RATELIMITED("Unknown advertising packet type: 0x%02x", | 
|  | evt_type); | 
|  |  | 
|  | return LE_ADV_INVALID; | 
|  | } | 
|  |  | 
|  | static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | u8 num_reports = skb->data[0]; | 
|  | void *ptr = &skb->data[1]; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | while (num_reports--) { | 
|  | struct hci_ev_le_ext_adv_report *ev = ptr; | 
|  | u8 legacy_evt_type; | 
|  | u16 evt_type; | 
|  |  | 
|  | evt_type = __le16_to_cpu(ev->evt_type); | 
|  | legacy_evt_type = ext_evt_type_to_legacy(evt_type); | 
|  | if (legacy_evt_type != LE_ADV_INVALID) { | 
|  | process_adv_report(hdev, legacy_evt_type, &ev->bdaddr, | 
|  | ev->bdaddr_type, NULL, 0, ev->rssi, | 
|  | ev->data, ev->length); | 
|  | } | 
|  |  | 
|  | ptr += sizeof(*ev) + ev->length + 1; | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_le_remote_feat_complete_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_remote_feat_complete *ev = (void *)skb->data; | 
|  | struct hci_conn *conn; | 
|  |  | 
|  | BT_DBG("%s status 0x%2.2x", hdev->name, ev->status); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn) { | 
|  | if (!ev->status) | 
|  | memcpy(conn->features[0], ev->features, 8); | 
|  |  | 
|  | if (conn->state == BT_CONFIG) { | 
|  | __u8 status; | 
|  |  | 
|  | /* If the local controller supports slave-initiated | 
|  | * features exchange, but the remote controller does | 
|  | * not, then it is possible that the error code 0x1a | 
|  | * for unsupported remote feature gets returned. | 
|  | * | 
|  | * In this specific case, allow the connection to | 
|  | * transition into connected state and mark it as | 
|  | * successful. | 
|  | */ | 
|  | if ((hdev->le_features[0] & HCI_LE_SLAVE_FEATURES) && | 
|  | !conn->out && ev->status == 0x1a) | 
|  | status = 0x00; | 
|  | else | 
|  | status = ev->status; | 
|  |  | 
|  | conn->state = BT_CONNECTED; | 
|  | hci_connect_cfm(conn, status); | 
|  | hci_conn_drop(conn); | 
|  | } | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_ltk_req *ev = (void *) skb->data; | 
|  | struct hci_cp_le_ltk_reply cp; | 
|  | struct hci_cp_le_ltk_neg_reply neg; | 
|  | struct hci_conn *conn; | 
|  | struct smp_ltk *ltk; | 
|  |  | 
|  | BT_DBG("%s handle 0x%4.4x", hdev->name, __le16_to_cpu(ev->handle)); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); | 
|  | if (conn == NULL) | 
|  | goto not_found; | 
|  |  | 
|  | ltk = hci_find_ltk(hdev, &conn->dst, conn->dst_type, conn->role); | 
|  | if (!ltk) | 
|  | goto not_found; | 
|  |  | 
|  | if (smp_ltk_is_sc(ltk)) { | 
|  | /* With SC both EDiv and Rand are set to zero */ | 
|  | if (ev->ediv || ev->rand) | 
|  | goto not_found; | 
|  | } else { | 
|  | /* For non-SC keys check that EDiv and Rand match */ | 
|  | if (ev->ediv != ltk->ediv || ev->rand != ltk->rand) | 
|  | goto not_found; | 
|  | } | 
|  |  | 
|  | memcpy(cp.ltk, ltk->val, ltk->enc_size); | 
|  | memset(cp.ltk + ltk->enc_size, 0, sizeof(cp.ltk) - ltk->enc_size); | 
|  | cp.handle = cpu_to_le16(conn->handle); | 
|  |  | 
|  | conn->pending_sec_level = smp_ltk_sec_level(ltk); | 
|  |  | 
|  | conn->enc_key_size = ltk->enc_size; | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp); | 
|  |  | 
|  | /* Ref. Bluetooth Core SPEC pages 1975 and 2004. STK is a | 
|  | * temporary key used to encrypt a connection following | 
|  | * pairing. It is used during the Encrypted Session Setup to | 
|  | * distribute the keys. Later, security can be re-established | 
|  | * using a distributed LTK. | 
|  | */ | 
|  | if (ltk->type == SMP_STK) { | 
|  | set_bit(HCI_CONN_STK_ENCRYPT, &conn->flags); | 
|  | list_del_rcu(<k->list); | 
|  | kfree_rcu(ltk, rcu); | 
|  | } else { | 
|  | clear_bit(HCI_CONN_STK_ENCRYPT, &conn->flags); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | return; | 
|  |  | 
|  | not_found: | 
|  | neg.handle = ev->handle; | 
|  | hci_send_cmd(hdev, HCI_OP_LE_LTK_NEG_REPLY, sizeof(neg), &neg); | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void send_conn_param_neg_reply(struct hci_dev *hdev, u16 handle, | 
|  | u8 reason) | 
|  | { | 
|  | struct hci_cp_le_conn_param_req_neg_reply cp; | 
|  |  | 
|  | cp.handle = cpu_to_le16(handle); | 
|  | cp.reason = reason; | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY, sizeof(cp), | 
|  | &cp); | 
|  | } | 
|  |  | 
|  | static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_remote_conn_param_req *ev = (void *) skb->data; | 
|  | struct hci_cp_le_conn_param_req_reply cp; | 
|  | struct hci_conn *hcon; | 
|  | u16 handle, min, max, latency, timeout; | 
|  |  | 
|  | handle = le16_to_cpu(ev->handle); | 
|  | min = le16_to_cpu(ev->interval_min); | 
|  | max = le16_to_cpu(ev->interval_max); | 
|  | latency = le16_to_cpu(ev->latency); | 
|  | timeout = le16_to_cpu(ev->timeout); | 
|  |  | 
|  | hcon = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | if (!hcon || hcon->state != BT_CONNECTED) | 
|  | return send_conn_param_neg_reply(hdev, handle, | 
|  | HCI_ERROR_UNKNOWN_CONN_ID); | 
|  |  | 
|  | if (hci_check_conn_params(min, max, latency, timeout)) | 
|  | return send_conn_param_neg_reply(hdev, handle, | 
|  | HCI_ERROR_INVALID_LL_PARAMS); | 
|  |  | 
|  | if (hcon->role == HCI_ROLE_MASTER) { | 
|  | struct hci_conn_params *params; | 
|  | u8 store_hint; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | params = hci_conn_params_lookup(hdev, &hcon->dst, | 
|  | hcon->dst_type); | 
|  | if (params) { | 
|  | params->conn_min_interval = min; | 
|  | params->conn_max_interval = max; | 
|  | params->conn_latency = latency; | 
|  | params->supervision_timeout = timeout; | 
|  | store_hint = 0x01; | 
|  | } else{ | 
|  | store_hint = 0x00; | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | mgmt_new_conn_param(hdev, &hcon->dst, hcon->dst_type, | 
|  | store_hint, min, max, latency, timeout); | 
|  | } | 
|  |  | 
|  | cp.handle = ev->handle; | 
|  | cp.interval_min = ev->interval_min; | 
|  | cp.interval_max = ev->interval_max; | 
|  | cp.latency = ev->latency; | 
|  | cp.timeout = ev->timeout; | 
|  | cp.min_ce_len = 0; | 
|  | cp.max_ce_len = 0; | 
|  |  | 
|  | hci_send_cmd(hdev, HCI_OP_LE_CONN_PARAM_REQ_REPLY, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | static void hci_le_direct_adv_report_evt(struct hci_dev *hdev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | u8 num_reports = skb->data[0]; | 
|  | void *ptr = &skb->data[1]; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | while (num_reports--) { | 
|  | struct hci_ev_le_direct_adv_info *ev = ptr; | 
|  |  | 
|  | process_adv_report(hdev, ev->evt_type, &ev->bdaddr, | 
|  | ev->bdaddr_type, &ev->direct_addr, | 
|  | ev->direct_addr_type, ev->rssi, NULL, 0); | 
|  |  | 
|  | ptr += sizeof(*ev); | 
|  | } | 
|  |  | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_le_meta_evt(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_le_meta *le_ev = (void *) skb->data; | 
|  |  | 
|  | skb_pull(skb, sizeof(*le_ev)); | 
|  |  | 
|  | switch (le_ev->subevent) { | 
|  | case HCI_EV_LE_CONN_COMPLETE: | 
|  | hci_le_conn_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_CONN_UPDATE_COMPLETE: | 
|  | hci_le_conn_update_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_ADVERTISING_REPORT: | 
|  | hci_le_adv_report_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_REMOTE_FEAT_COMPLETE: | 
|  | hci_le_remote_feat_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_LTK_REQ: | 
|  | hci_le_ltk_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_REMOTE_CONN_PARAM_REQ: | 
|  | hci_le_remote_conn_param_req_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_DIRECT_ADV_REPORT: | 
|  | hci_le_direct_adv_report_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_EXT_ADV_REPORT: | 
|  | hci_le_ext_adv_report_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_ENHANCED_CONN_COMPLETE: | 
|  | hci_le_enh_conn_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_EXT_ADV_SET_TERM: | 
|  | hci_le_ext_adv_term_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool hci_get_cmd_complete(struct hci_dev *hdev, u16 opcode, | 
|  | u8 event, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_ev_cmd_complete *ev; | 
|  | struct hci_event_hdr *hdr; | 
|  |  | 
|  | if (!skb) | 
|  | return false; | 
|  |  | 
|  | if (skb->len < sizeof(*hdr)) { | 
|  | bt_dev_err(hdev, "too short HCI event"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | hdr = (void *) skb->data; | 
|  | skb_pull(skb, HCI_EVENT_HDR_SIZE); | 
|  |  | 
|  | if (event) { | 
|  | if (hdr->evt != event) | 
|  | return false; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (hdr->evt != HCI_EV_CMD_COMPLETE) { | 
|  | bt_dev_err(hdev, "last event is not cmd complete (0x%2.2x)", | 
|  | hdr->evt); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (skb->len < sizeof(*ev)) { | 
|  | bt_dev_err(hdev, "too short cmd_complete event"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ev = (void *) skb->data; | 
|  | skb_pull(skb, sizeof(*ev)); | 
|  |  | 
|  | if (opcode != __le16_to_cpu(ev->opcode)) { | 
|  | BT_DBG("opcode doesn't match (0x%2.2x != 0x%2.2x)", opcode, | 
|  | __le16_to_cpu(ev->opcode)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_event_hdr *hdr = (void *) skb->data; | 
|  | hci_req_complete_t req_complete = NULL; | 
|  | hci_req_complete_skb_t req_complete_skb = NULL; | 
|  | struct sk_buff *orig_skb = NULL; | 
|  | u8 status = 0, event = hdr->evt, req_evt = 0; | 
|  | u16 opcode = HCI_OP_NOP; | 
|  |  | 
|  | if (hdev->sent_cmd && bt_cb(hdev->sent_cmd)->hci.req_event == event) { | 
|  | struct hci_command_hdr *cmd_hdr = (void *) hdev->sent_cmd->data; | 
|  | opcode = __le16_to_cpu(cmd_hdr->opcode); | 
|  | hci_req_cmd_complete(hdev, opcode, status, &req_complete, | 
|  | &req_complete_skb); | 
|  | req_evt = event; | 
|  | } | 
|  |  | 
|  | /* If it looks like we might end up having to call | 
|  | * req_complete_skb, store a pristine copy of the skb since the | 
|  | * various handlers may modify the original one through | 
|  | * skb_pull() calls, etc. | 
|  | */ | 
|  | if (req_complete_skb || event == HCI_EV_CMD_STATUS || | 
|  | event == HCI_EV_CMD_COMPLETE) | 
|  | orig_skb = skb_clone(skb, GFP_KERNEL); | 
|  |  | 
|  | skb_pull(skb, HCI_EVENT_HDR_SIZE); | 
|  |  | 
|  | switch (event) { | 
|  | case HCI_EV_INQUIRY_COMPLETE: | 
|  | hci_inquiry_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_INQUIRY_RESULT: | 
|  | hci_inquiry_result_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CONN_COMPLETE: | 
|  | hci_conn_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CONN_REQUEST: | 
|  | hci_conn_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_DISCONN_COMPLETE: | 
|  | hci_disconn_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_AUTH_COMPLETE: | 
|  | hci_auth_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_REMOTE_NAME: | 
|  | hci_remote_name_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_ENCRYPT_CHANGE: | 
|  | hci_encrypt_change_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CHANGE_LINK_KEY_COMPLETE: | 
|  | hci_change_link_key_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_REMOTE_FEATURES: | 
|  | hci_remote_features_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CMD_COMPLETE: | 
|  | hci_cmd_complete_evt(hdev, skb, &opcode, &status, | 
|  | &req_complete, &req_complete_skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CMD_STATUS: | 
|  | hci_cmd_status_evt(hdev, skb, &opcode, &status, &req_complete, | 
|  | &req_complete_skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_HARDWARE_ERROR: | 
|  | hci_hardware_error_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_ROLE_CHANGE: | 
|  | hci_role_change_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_NUM_COMP_PKTS: | 
|  | hci_num_comp_pkts_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_MODE_CHANGE: | 
|  | hci_mode_change_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_PIN_CODE_REQ: | 
|  | hci_pin_code_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LINK_KEY_REQ: | 
|  | hci_link_key_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LINK_KEY_NOTIFY: | 
|  | hci_link_key_notify_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_CLOCK_OFFSET: | 
|  | hci_clock_offset_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_PKT_TYPE_CHANGE: | 
|  | hci_pkt_type_change_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_PSCAN_REP_MODE: | 
|  | hci_pscan_rep_mode_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_INQUIRY_RESULT_WITH_RSSI: | 
|  | hci_inquiry_result_with_rssi_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_REMOTE_EXT_FEATURES: | 
|  | hci_remote_ext_features_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_SYNC_CONN_COMPLETE: | 
|  | hci_sync_conn_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_EXTENDED_INQUIRY_RESULT: | 
|  | hci_extended_inquiry_result_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_KEY_REFRESH_COMPLETE: | 
|  | hci_key_refresh_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_IO_CAPA_REQUEST: | 
|  | hci_io_capa_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_IO_CAPA_REPLY: | 
|  | hci_io_capa_reply_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_USER_CONFIRM_REQUEST: | 
|  | hci_user_confirm_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_USER_PASSKEY_REQUEST: | 
|  | hci_user_passkey_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_USER_PASSKEY_NOTIFY: | 
|  | hci_user_passkey_notify_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_KEYPRESS_NOTIFY: | 
|  | hci_keypress_notify_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_SIMPLE_PAIR_COMPLETE: | 
|  | hci_simple_pair_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_REMOTE_HOST_FEATURES: | 
|  | hci_remote_host_features_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LE_META: | 
|  | hci_le_meta_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_REMOTE_OOB_DATA_REQUEST: | 
|  | hci_remote_oob_data_request_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_BT_HS) | 
|  | case HCI_EV_CHANNEL_SELECTED: | 
|  | hci_chan_selected_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_PHY_LINK_COMPLETE: | 
|  | hci_phy_link_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_LOGICAL_LINK_COMPLETE: | 
|  | hci_loglink_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_DISCONN_LOGICAL_LINK_COMPLETE: | 
|  | hci_disconn_loglink_complete_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_EV_DISCONN_PHY_LINK_COMPLETE: | 
|  | hci_disconn_phylink_complete_evt(hdev, skb); | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | case HCI_EV_NUM_COMP_BLOCKS: | 
|  | hci_num_comp_blocks_evt(hdev, skb); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | BT_DBG("%s event 0x%2.2x", hdev->name, event); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (req_complete) { | 
|  | req_complete(hdev, status, opcode); | 
|  | } else if (req_complete_skb) { | 
|  | if (!hci_get_cmd_complete(hdev, opcode, req_evt, orig_skb)) { | 
|  | kfree_skb(orig_skb); | 
|  | orig_skb = NULL; | 
|  | } | 
|  | req_complete_skb(hdev, status, opcode, orig_skb); | 
|  | } | 
|  |  | 
|  | kfree_skb(orig_skb); | 
|  | kfree_skb(skb); | 
|  | hdev->stat.evt_rx++; | 
|  | } |