|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Workingset detection | 
|  | * | 
|  | * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner | 
|  | */ | 
|  |  | 
|  | #include <linux/memcontrol.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/shmem_fs.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/atomic.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/swap.h> | 
|  | #include <linux/dax.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/mm.h> | 
|  |  | 
|  | /* | 
|  | *		Double CLOCK lists | 
|  | * | 
|  | * Per node, two clock lists are maintained for file pages: the | 
|  | * inactive and the active list.  Freshly faulted pages start out at | 
|  | * the head of the inactive list and page reclaim scans pages from the | 
|  | * tail.  Pages that are accessed multiple times on the inactive list | 
|  | * are promoted to the active list, to protect them from reclaim, | 
|  | * whereas active pages are demoted to the inactive list when the | 
|  | * active list grows too big. | 
|  | * | 
|  | *   fault ------------------------+ | 
|  | *                                 | | 
|  | *              +--------------+   |            +-------------+ | 
|  | *   reclaim <- |   inactive   | <-+-- demotion |    active   | <--+ | 
|  | *              +--------------+                +-------------+    | | 
|  | *                     |                                           | | 
|  | *                     +-------------- promotion ------------------+ | 
|  | * | 
|  | * | 
|  | *		Access frequency and refault distance | 
|  | * | 
|  | * A workload is thrashing when its pages are frequently used but they | 
|  | * are evicted from the inactive list every time before another access | 
|  | * would have promoted them to the active list. | 
|  | * | 
|  | * In cases where the average access distance between thrashing pages | 
|  | * is bigger than the size of memory there is nothing that can be | 
|  | * done - the thrashing set could never fit into memory under any | 
|  | * circumstance. | 
|  | * | 
|  | * However, the average access distance could be bigger than the | 
|  | * inactive list, yet smaller than the size of memory.  In this case, | 
|  | * the set could fit into memory if it weren't for the currently | 
|  | * active pages - which may be used more, hopefully less frequently: | 
|  | * | 
|  | *      +-memory available to cache-+ | 
|  | *      |                           | | 
|  | *      +-inactive------+-active----+ | 
|  | *  a b | c d e f g h i | J K L M N | | 
|  | *      +---------------+-----------+ | 
|  | * | 
|  | * It is prohibitively expensive to accurately track access frequency | 
|  | * of pages.  But a reasonable approximation can be made to measure | 
|  | * thrashing on the inactive list, after which refaulting pages can be | 
|  | * activated optimistically to compete with the existing active pages. | 
|  | * | 
|  | * Approximating inactive page access frequency - Observations: | 
|  | * | 
|  | * 1. When a page is accessed for the first time, it is added to the | 
|  | *    head of the inactive list, slides every existing inactive page | 
|  | *    towards the tail by one slot, and pushes the current tail page | 
|  | *    out of memory. | 
|  | * | 
|  | * 2. When a page is accessed for the second time, it is promoted to | 
|  | *    the active list, shrinking the inactive list by one slot.  This | 
|  | *    also slides all inactive pages that were faulted into the cache | 
|  | *    more recently than the activated page towards the tail of the | 
|  | *    inactive list. | 
|  | * | 
|  | * Thus: | 
|  | * | 
|  | * 1. The sum of evictions and activations between any two points in | 
|  | *    time indicate the minimum number of inactive pages accessed in | 
|  | *    between. | 
|  | * | 
|  | * 2. Moving one inactive page N page slots towards the tail of the | 
|  | *    list requires at least N inactive page accesses. | 
|  | * | 
|  | * Combining these: | 
|  | * | 
|  | * 1. When a page is finally evicted from memory, the number of | 
|  | *    inactive pages accessed while the page was in cache is at least | 
|  | *    the number of page slots on the inactive list. | 
|  | * | 
|  | * 2. In addition, measuring the sum of evictions and activations (E) | 
|  | *    at the time of a page's eviction, and comparing it to another | 
|  | *    reading (R) at the time the page faults back into memory tells | 
|  | *    the minimum number of accesses while the page was not cached. | 
|  | *    This is called the refault distance. | 
|  | * | 
|  | * Because the first access of the page was the fault and the second | 
|  | * access the refault, we combine the in-cache distance with the | 
|  | * out-of-cache distance to get the complete minimum access distance | 
|  | * of this page: | 
|  | * | 
|  | *      NR_inactive + (R - E) | 
|  | * | 
|  | * And knowing the minimum access distance of a page, we can easily | 
|  | * tell if the page would be able to stay in cache assuming all page | 
|  | * slots in the cache were available: | 
|  | * | 
|  | *   NR_inactive + (R - E) <= NR_inactive + NR_active | 
|  | * | 
|  | * which can be further simplified to | 
|  | * | 
|  | *   (R - E) <= NR_active | 
|  | * | 
|  | * Put into words, the refault distance (out-of-cache) can be seen as | 
|  | * a deficit in inactive list space (in-cache).  If the inactive list | 
|  | * had (R - E) more page slots, the page would not have been evicted | 
|  | * in between accesses, but activated instead.  And on a full system, | 
|  | * the only thing eating into inactive list space is active pages. | 
|  | * | 
|  | * | 
|  | *		Refaulting inactive pages | 
|  | * | 
|  | * All that is known about the active list is that the pages have been | 
|  | * accessed more than once in the past.  This means that at any given | 
|  | * time there is actually a good chance that pages on the active list | 
|  | * are no longer in active use. | 
|  | * | 
|  | * So when a refault distance of (R - E) is observed and there are at | 
|  | * least (R - E) active pages, the refaulting page is activated | 
|  | * optimistically in the hope that (R - E) active pages are actually | 
|  | * used less frequently than the refaulting page - or even not used at | 
|  | * all anymore. | 
|  | * | 
|  | * That means if inactive cache is refaulting with a suitable refault | 
|  | * distance, we assume the cache workingset is transitioning and put | 
|  | * pressure on the current active list. | 
|  | * | 
|  | * If this is wrong and demotion kicks in, the pages which are truly | 
|  | * used more frequently will be reactivated while the less frequently | 
|  | * used once will be evicted from memory. | 
|  | * | 
|  | * But if this is right, the stale pages will be pushed out of memory | 
|  | * and the used pages get to stay in cache. | 
|  | * | 
|  | *		Refaulting active pages | 
|  | * | 
|  | * If on the other hand the refaulting pages have recently been | 
|  | * deactivated, it means that the active list is no longer protecting | 
|  | * actively used cache from reclaim. The cache is NOT transitioning to | 
|  | * a different workingset; the existing workingset is thrashing in the | 
|  | * space allocated to the page cache. | 
|  | * | 
|  | * | 
|  | *		Implementation | 
|  | * | 
|  | * For each node's file LRU lists, a counter for inactive evictions | 
|  | * and activations is maintained (node->inactive_age). | 
|  | * | 
|  | * On eviction, a snapshot of this counter (along with some bits to | 
|  | * identify the node) is stored in the now empty page cache | 
|  | * slot of the evicted page.  This is called a shadow entry. | 
|  | * | 
|  | * On cache misses for which there are shadow entries, an eligible | 
|  | * refault distance will immediately activate the refaulting page. | 
|  | */ | 
|  |  | 
|  | #define EVICTION_SHIFT	((BITS_PER_LONG - BITS_PER_XA_VALUE) +	\ | 
|  | 1 + NODES_SHIFT + MEM_CGROUP_ID_SHIFT) | 
|  | #define EVICTION_MASK	(~0UL >> EVICTION_SHIFT) | 
|  |  | 
|  | /* | 
|  | * Eviction timestamps need to be able to cover the full range of | 
|  | * actionable refaults. However, bits are tight in the xarray | 
|  | * entry, and after storing the identifier for the lruvec there might | 
|  | * not be enough left to represent every single actionable refault. In | 
|  | * that case, we have to sacrifice granularity for distance, and group | 
|  | * evictions into coarser buckets by shaving off lower timestamp bits. | 
|  | */ | 
|  | static unsigned int bucket_order __read_mostly; | 
|  |  | 
|  | static void *pack_shadow(int memcgid, pg_data_t *pgdat, unsigned long eviction, | 
|  | bool workingset) | 
|  | { | 
|  | eviction >>= bucket_order; | 
|  | eviction &= EVICTION_MASK; | 
|  | eviction = (eviction << MEM_CGROUP_ID_SHIFT) | memcgid; | 
|  | eviction = (eviction << NODES_SHIFT) | pgdat->node_id; | 
|  | eviction = (eviction << 1) | workingset; | 
|  |  | 
|  | return xa_mk_value(eviction); | 
|  | } | 
|  |  | 
|  | static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat, | 
|  | unsigned long *evictionp, bool *workingsetp) | 
|  | { | 
|  | unsigned long entry = xa_to_value(shadow); | 
|  | int memcgid, nid; | 
|  | bool workingset; | 
|  |  | 
|  | workingset = entry & 1; | 
|  | entry >>= 1; | 
|  | nid = entry & ((1UL << NODES_SHIFT) - 1); | 
|  | entry >>= NODES_SHIFT; | 
|  | memcgid = entry & ((1UL << MEM_CGROUP_ID_SHIFT) - 1); | 
|  | entry >>= MEM_CGROUP_ID_SHIFT; | 
|  |  | 
|  | *memcgidp = memcgid; | 
|  | *pgdat = NODE_DATA(nid); | 
|  | *evictionp = entry << bucket_order; | 
|  | *workingsetp = workingset; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * workingset_eviction - note the eviction of a page from memory | 
|  | * @mapping: address space the page was backing | 
|  | * @page: the page being evicted | 
|  | * | 
|  | * Returns a shadow entry to be stored in @mapping->i_pages in place | 
|  | * of the evicted @page so that a later refault can be detected. | 
|  | */ | 
|  | void *workingset_eviction(struct address_space *mapping, struct page *page) | 
|  | { | 
|  | struct pglist_data *pgdat = page_pgdat(page); | 
|  | struct mem_cgroup *memcg = page_memcg(page); | 
|  | int memcgid = mem_cgroup_id(memcg); | 
|  | unsigned long eviction; | 
|  | struct lruvec *lruvec; | 
|  |  | 
|  | /* Page is fully exclusive and pins page->mem_cgroup */ | 
|  | VM_BUG_ON_PAGE(PageLRU(page), page); | 
|  | VM_BUG_ON_PAGE(page_count(page), page); | 
|  | VM_BUG_ON_PAGE(!PageLocked(page), page); | 
|  |  | 
|  | lruvec = mem_cgroup_lruvec(pgdat, memcg); | 
|  | eviction = atomic_long_inc_return(&lruvec->inactive_age); | 
|  | return pack_shadow(memcgid, pgdat, eviction, PageWorkingset(page)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * workingset_refault - evaluate the refault of a previously evicted page | 
|  | * @page: the freshly allocated replacement page | 
|  | * @shadow: shadow entry of the evicted page | 
|  | * | 
|  | * Calculates and evaluates the refault distance of the previously | 
|  | * evicted page in the context of the node it was allocated in. | 
|  | */ | 
|  | void workingset_refault(struct page *page, void *shadow) | 
|  | { | 
|  | unsigned long refault_distance; | 
|  | struct pglist_data *pgdat; | 
|  | unsigned long active_file; | 
|  | struct mem_cgroup *memcg; | 
|  | unsigned long eviction; | 
|  | struct lruvec *lruvec; | 
|  | unsigned long refault; | 
|  | bool workingset; | 
|  | int memcgid; | 
|  |  | 
|  | unpack_shadow(shadow, &memcgid, &pgdat, &eviction, &workingset); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | /* | 
|  | * Look up the memcg associated with the stored ID. It might | 
|  | * have been deleted since the page's eviction. | 
|  | * | 
|  | * Note that in rare events the ID could have been recycled | 
|  | * for a new cgroup that refaults a shared page. This is | 
|  | * impossible to tell from the available data. However, this | 
|  | * should be a rare and limited disturbance, and activations | 
|  | * are always speculative anyway. Ultimately, it's the aging | 
|  | * algorithm's job to shake out the minimum access frequency | 
|  | * for the active cache. | 
|  | * | 
|  | * XXX: On !CONFIG_MEMCG, this will always return NULL; it | 
|  | * would be better if the root_mem_cgroup existed in all | 
|  | * configurations instead. | 
|  | */ | 
|  | memcg = mem_cgroup_from_id(memcgid); | 
|  | if (!mem_cgroup_disabled() && !memcg) | 
|  | goto out; | 
|  | lruvec = mem_cgroup_lruvec(pgdat, memcg); | 
|  | refault = atomic_long_read(&lruvec->inactive_age); | 
|  | active_file = lruvec_lru_size(lruvec, LRU_ACTIVE_FILE, MAX_NR_ZONES); | 
|  |  | 
|  | /* | 
|  | * Calculate the refault distance | 
|  | * | 
|  | * The unsigned subtraction here gives an accurate distance | 
|  | * across inactive_age overflows in most cases. There is a | 
|  | * special case: usually, shadow entries have a short lifetime | 
|  | * and are either refaulted or reclaimed along with the inode | 
|  | * before they get too old.  But it is not impossible for the | 
|  | * inactive_age to lap a shadow entry in the field, which can | 
|  | * then result in a false small refault distance, leading to a | 
|  | * false activation should this old entry actually refault | 
|  | * again.  However, earlier kernels used to deactivate | 
|  | * unconditionally with *every* reclaim invocation for the | 
|  | * longest time, so the occasional inappropriate activation | 
|  | * leading to pressure on the active list is not a problem. | 
|  | */ | 
|  | refault_distance = (refault - eviction) & EVICTION_MASK; | 
|  |  | 
|  | inc_lruvec_state(lruvec, WORKINGSET_REFAULT); | 
|  |  | 
|  | /* | 
|  | * Compare the distance to the existing workingset size. We | 
|  | * don't act on pages that couldn't stay resident even if all | 
|  | * the memory was available to the page cache. | 
|  | */ | 
|  | if (refault_distance > active_file) | 
|  | goto out; | 
|  |  | 
|  | SetPageActive(page); | 
|  | atomic_long_inc(&lruvec->inactive_age); | 
|  | inc_lruvec_state(lruvec, WORKINGSET_ACTIVATE); | 
|  |  | 
|  | /* Page was active prior to eviction */ | 
|  | if (workingset) { | 
|  | SetPageWorkingset(page); | 
|  | inc_lruvec_state(lruvec, WORKINGSET_RESTORE); | 
|  | } | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * workingset_activation - note a page activation | 
|  | * @page: page that is being activated | 
|  | */ | 
|  | void workingset_activation(struct page *page) | 
|  | { | 
|  | struct mem_cgroup *memcg; | 
|  | struct lruvec *lruvec; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | /* | 
|  | * Filter non-memcg pages here, e.g. unmap can call | 
|  | * mark_page_accessed() on VDSO pages. | 
|  | * | 
|  | * XXX: See workingset_refault() - this should return | 
|  | * root_mem_cgroup even for !CONFIG_MEMCG. | 
|  | */ | 
|  | memcg = page_memcg_rcu(page); | 
|  | if (!mem_cgroup_disabled() && !memcg) | 
|  | goto out; | 
|  | lruvec = mem_cgroup_lruvec(page_pgdat(page), memcg); | 
|  | atomic_long_inc(&lruvec->inactive_age); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Shadow entries reflect the share of the working set that does not | 
|  | * fit into memory, so their number depends on the access pattern of | 
|  | * the workload.  In most cases, they will refault or get reclaimed | 
|  | * along with the inode, but a (malicious) workload that streams | 
|  | * through files with a total size several times that of available | 
|  | * memory, while preventing the inodes from being reclaimed, can | 
|  | * create excessive amounts of shadow nodes.  To keep a lid on this, | 
|  | * track shadow nodes and reclaim them when they grow way past the | 
|  | * point where they would still be useful. | 
|  | */ | 
|  |  | 
|  | static struct list_lru shadow_nodes; | 
|  |  | 
|  | void workingset_update_node(struct xa_node *node) | 
|  | { | 
|  | /* | 
|  | * Track non-empty nodes that contain only shadow entries; | 
|  | * unlink those that contain pages or are being freed. | 
|  | * | 
|  | * Avoid acquiring the list_lru lock when the nodes are | 
|  | * already where they should be. The list_empty() test is safe | 
|  | * as node->private_list is protected by the i_pages lock. | 
|  | */ | 
|  | VM_WARN_ON_ONCE(!irqs_disabled());  /* For __inc_lruvec_page_state */ | 
|  |  | 
|  | if (node->count && node->count == node->nr_values) { | 
|  | if (list_empty(&node->private_list)) { | 
|  | list_lru_add(&shadow_nodes, &node->private_list); | 
|  | __inc_lruvec_page_state(virt_to_page(node), | 
|  | WORKINGSET_NODES); | 
|  | } | 
|  | } else { | 
|  | if (!list_empty(&node->private_list)) { | 
|  | list_lru_del(&shadow_nodes, &node->private_list); | 
|  | __dec_lruvec_page_state(virt_to_page(node), | 
|  | WORKINGSET_NODES); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned long count_shadow_nodes(struct shrinker *shrinker, | 
|  | struct shrink_control *sc) | 
|  | { | 
|  | unsigned long max_nodes; | 
|  | unsigned long nodes; | 
|  | unsigned long pages; | 
|  |  | 
|  | nodes = list_lru_shrink_count(&shadow_nodes, sc); | 
|  |  | 
|  | /* | 
|  | * Approximate a reasonable limit for the nodes | 
|  | * containing shadow entries. We don't need to keep more | 
|  | * shadow entries than possible pages on the active list, | 
|  | * since refault distances bigger than that are dismissed. | 
|  | * | 
|  | * The size of the active list converges toward 100% of | 
|  | * overall page cache as memory grows, with only a tiny | 
|  | * inactive list. Assume the total cache size for that. | 
|  | * | 
|  | * Nodes might be sparsely populated, with only one shadow | 
|  | * entry in the extreme case. Obviously, we cannot keep one | 
|  | * node for every eligible shadow entry, so compromise on a | 
|  | * worst-case density of 1/8th. Below that, not all eligible | 
|  | * refaults can be detected anymore. | 
|  | * | 
|  | * On 64-bit with 7 xa_nodes per page and 64 slots | 
|  | * each, this will reclaim shadow entries when they consume | 
|  | * ~1.8% of available memory: | 
|  | * | 
|  | * PAGE_SIZE / xa_nodes / node_entries * 8 / PAGE_SIZE | 
|  | */ | 
|  | #ifdef CONFIG_MEMCG | 
|  | if (sc->memcg) { | 
|  | struct lruvec *lruvec; | 
|  |  | 
|  | pages = mem_cgroup_node_nr_lru_pages(sc->memcg, sc->nid, | 
|  | LRU_ALL); | 
|  | lruvec = mem_cgroup_lruvec(NODE_DATA(sc->nid), sc->memcg); | 
|  | pages += lruvec_page_state(lruvec, NR_SLAB_RECLAIMABLE); | 
|  | pages += lruvec_page_state(lruvec, NR_SLAB_UNRECLAIMABLE); | 
|  | } else | 
|  | #endif | 
|  | pages = node_present_pages(sc->nid); | 
|  |  | 
|  | max_nodes = pages >> (XA_CHUNK_SHIFT - 3); | 
|  |  | 
|  | if (!nodes) | 
|  | return SHRINK_EMPTY; | 
|  |  | 
|  | if (nodes <= max_nodes) | 
|  | return 0; | 
|  | return nodes - max_nodes; | 
|  | } | 
|  |  | 
|  | static enum lru_status shadow_lru_isolate(struct list_head *item, | 
|  | struct list_lru_one *lru, | 
|  | spinlock_t *lru_lock, | 
|  | void *arg) __must_hold(lru_lock) | 
|  | { | 
|  | struct xa_node *node = container_of(item, struct xa_node, private_list); | 
|  | XA_STATE(xas, node->array, 0); | 
|  | struct address_space *mapping; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Page cache insertions and deletions synchroneously maintain | 
|  | * the shadow node LRU under the i_pages lock and the | 
|  | * lru_lock.  Because the page cache tree is emptied before | 
|  | * the inode can be destroyed, holding the lru_lock pins any | 
|  | * address_space that has nodes on the LRU. | 
|  | * | 
|  | * We can then safely transition to the i_pages lock to | 
|  | * pin only the address_space of the particular node we want | 
|  | * to reclaim, take the node off-LRU, and drop the lru_lock. | 
|  | */ | 
|  |  | 
|  | mapping = container_of(node->array, struct address_space, i_pages); | 
|  |  | 
|  | /* Coming from the list, invert the lock order */ | 
|  | if (!xa_trylock(&mapping->i_pages)) { | 
|  | spin_unlock_irq(lru_lock); | 
|  | ret = LRU_RETRY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | list_lru_isolate(lru, item); | 
|  | __dec_lruvec_page_state(virt_to_page(node), WORKINGSET_NODES); | 
|  |  | 
|  | spin_unlock(lru_lock); | 
|  |  | 
|  | /* | 
|  | * The nodes should only contain one or more shadow entries, | 
|  | * no pages, so we expect to be able to remove them all and | 
|  | * delete and free the empty node afterwards. | 
|  | */ | 
|  | if (WARN_ON_ONCE(!node->nr_values)) | 
|  | goto out_invalid; | 
|  | if (WARN_ON_ONCE(node->count != node->nr_values)) | 
|  | goto out_invalid; | 
|  | mapping->nrexceptional -= node->nr_values; | 
|  | xas.xa_node = xa_parent_locked(&mapping->i_pages, node); | 
|  | xas.xa_offset = node->offset; | 
|  | xas.xa_shift = node->shift + XA_CHUNK_SHIFT; | 
|  | xas_set_update(&xas, workingset_update_node); | 
|  | /* | 
|  | * We could store a shadow entry here which was the minimum of the | 
|  | * shadow entries we were tracking ... | 
|  | */ | 
|  | xas_store(&xas, NULL); | 
|  | __inc_lruvec_page_state(virt_to_page(node), WORKINGSET_NODERECLAIM); | 
|  |  | 
|  | out_invalid: | 
|  | xa_unlock_irq(&mapping->i_pages); | 
|  | ret = LRU_REMOVED_RETRY; | 
|  | out: | 
|  | cond_resched(); | 
|  | spin_lock_irq(lru_lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned long scan_shadow_nodes(struct shrinker *shrinker, | 
|  | struct shrink_control *sc) | 
|  | { | 
|  | /* list_lru lock nests inside the IRQ-safe i_pages lock */ | 
|  | return list_lru_shrink_walk_irq(&shadow_nodes, sc, shadow_lru_isolate, | 
|  | NULL); | 
|  | } | 
|  |  | 
|  | static struct shrinker workingset_shadow_shrinker = { | 
|  | .count_objects = count_shadow_nodes, | 
|  | .scan_objects = scan_shadow_nodes, | 
|  | .seeks = 0, /* ->count reports only fully expendable nodes */ | 
|  | .flags = SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe | 
|  | * i_pages lock. | 
|  | */ | 
|  | static struct lock_class_key shadow_nodes_key; | 
|  |  | 
|  | static int __init workingset_init(void) | 
|  | { | 
|  | unsigned int timestamp_bits; | 
|  | unsigned int max_order; | 
|  | int ret; | 
|  |  | 
|  | BUILD_BUG_ON(BITS_PER_LONG < EVICTION_SHIFT); | 
|  | /* | 
|  | * Calculate the eviction bucket size to cover the longest | 
|  | * actionable refault distance, which is currently half of | 
|  | * memory (totalram_pages/2). However, memory hotplug may add | 
|  | * some more pages at runtime, so keep working with up to | 
|  | * double the initial memory by using totalram_pages as-is. | 
|  | */ | 
|  | timestamp_bits = BITS_PER_LONG - EVICTION_SHIFT; | 
|  | max_order = fls_long(totalram_pages - 1); | 
|  | if (max_order > timestamp_bits) | 
|  | bucket_order = max_order - timestamp_bits; | 
|  | pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n", | 
|  | timestamp_bits, max_order, bucket_order); | 
|  |  | 
|  | ret = prealloc_shrinker(&workingset_shadow_shrinker); | 
|  | if (ret) | 
|  | goto err; | 
|  | ret = __list_lru_init(&shadow_nodes, true, &shadow_nodes_key, | 
|  | &workingset_shadow_shrinker); | 
|  | if (ret) | 
|  | goto err_list_lru; | 
|  | register_shrinker_prepared(&workingset_shadow_shrinker); | 
|  | return 0; | 
|  | err_list_lru: | 
|  | free_prealloced_shrinker(&workingset_shadow_shrinker); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  | module_init(workingset_init); |