|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Versatile Express SPC CPUFreq Interface driver | 
|  | * | 
|  | * Copyright (C) 2013 - 2019 ARM Ltd. | 
|  | * Sudeep Holla <sudeep.holla@arm.com> | 
|  | * | 
|  | * Copyright (C) 2013 Linaro. | 
|  | * Viresh Kumar <viresh.kumar@linaro.org> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/cpumask.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_opp.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/topology.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | /* Currently we support only two clusters */ | 
|  | #define A15_CLUSTER	0 | 
|  | #define A7_CLUSTER	1 | 
|  | #define MAX_CLUSTERS	2 | 
|  |  | 
|  | #ifdef CONFIG_BL_SWITCHER | 
|  | #include <asm/bL_switcher.h> | 
|  | static bool bL_switching_enabled; | 
|  | #define is_bL_switching_enabled()	bL_switching_enabled | 
|  | #define set_switching_enabled(x)	(bL_switching_enabled = (x)) | 
|  | #else | 
|  | #define is_bL_switching_enabled()	false | 
|  | #define set_switching_enabled(x)	do { } while (0) | 
|  | #define bL_switch_request(...)		do { } while (0) | 
|  | #define bL_switcher_put_enabled()	do { } while (0) | 
|  | #define bL_switcher_get_enabled()	do { } while (0) | 
|  | #endif | 
|  |  | 
|  | #define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq) | 
|  | #define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq) | 
|  |  | 
|  | static struct clk *clk[MAX_CLUSTERS]; | 
|  | static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1]; | 
|  | static atomic_t cluster_usage[MAX_CLUSTERS + 1]; | 
|  |  | 
|  | static unsigned int clk_big_min;	/* (Big) clock frequencies */ | 
|  | static unsigned int clk_little_max;	/* Maximum clock frequency (Little) */ | 
|  |  | 
|  | static DEFINE_PER_CPU(unsigned int, physical_cluster); | 
|  | static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq); | 
|  |  | 
|  | static struct mutex cluster_lock[MAX_CLUSTERS]; | 
|  |  | 
|  | static inline int raw_cpu_to_cluster(int cpu) | 
|  | { | 
|  | return topology_physical_package_id(cpu); | 
|  | } | 
|  |  | 
|  | static inline int cpu_to_cluster(int cpu) | 
|  | { | 
|  | return is_bL_switching_enabled() ? | 
|  | MAX_CLUSTERS : raw_cpu_to_cluster(cpu); | 
|  | } | 
|  |  | 
|  | static unsigned int find_cluster_maxfreq(int cluster) | 
|  | { | 
|  | int j; | 
|  | u32 max_freq = 0, cpu_freq; | 
|  |  | 
|  | for_each_online_cpu(j) { | 
|  | cpu_freq = per_cpu(cpu_last_req_freq, j); | 
|  |  | 
|  | if (cluster == per_cpu(physical_cluster, j) && | 
|  | max_freq < cpu_freq) | 
|  | max_freq = cpu_freq; | 
|  | } | 
|  |  | 
|  | return max_freq; | 
|  | } | 
|  |  | 
|  | static unsigned int clk_get_cpu_rate(unsigned int cpu) | 
|  | { | 
|  | u32 cur_cluster = per_cpu(physical_cluster, cpu); | 
|  | u32 rate = clk_get_rate(clk[cur_cluster]) / 1000; | 
|  |  | 
|  | /* For switcher we use virtual A7 clock rates */ | 
|  | if (is_bL_switching_enabled()) | 
|  | rate = VIRT_FREQ(cur_cluster, rate); | 
|  |  | 
|  | return rate; | 
|  | } | 
|  |  | 
|  | static unsigned int ve_spc_cpufreq_get_rate(unsigned int cpu) | 
|  | { | 
|  | if (is_bL_switching_enabled()) | 
|  | return per_cpu(cpu_last_req_freq, cpu); | 
|  | else | 
|  | return clk_get_cpu_rate(cpu); | 
|  | } | 
|  |  | 
|  | static unsigned int | 
|  | ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) | 
|  | { | 
|  | u32 new_rate, prev_rate; | 
|  | int ret; | 
|  | bool bLs = is_bL_switching_enabled(); | 
|  |  | 
|  | mutex_lock(&cluster_lock[new_cluster]); | 
|  |  | 
|  | if (bLs) { | 
|  | prev_rate = per_cpu(cpu_last_req_freq, cpu); | 
|  | per_cpu(cpu_last_req_freq, cpu) = rate; | 
|  | per_cpu(physical_cluster, cpu) = new_cluster; | 
|  |  | 
|  | new_rate = find_cluster_maxfreq(new_cluster); | 
|  | new_rate = ACTUAL_FREQ(new_cluster, new_rate); | 
|  | } else { | 
|  | new_rate = rate; | 
|  | } | 
|  |  | 
|  | ret = clk_set_rate(clk[new_cluster], new_rate * 1000); | 
|  | if (!ret) { | 
|  | /* | 
|  | * FIXME: clk_set_rate hasn't returned an error here however it | 
|  | * may be that clk_change_rate failed due to hardware or | 
|  | * firmware issues and wasn't able to report that due to the | 
|  | * current design of the clk core layer. To work around this | 
|  | * problem we will read back the clock rate and check it is | 
|  | * correct. This needs to be removed once clk core is fixed. | 
|  | */ | 
|  | if (clk_get_rate(clk[new_cluster]) != new_rate * 1000) | 
|  | ret = -EIO; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(ret)) { | 
|  | if (bLs) { | 
|  | per_cpu(cpu_last_req_freq, cpu) = prev_rate; | 
|  | per_cpu(physical_cluster, cpu) = old_cluster; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&cluster_lock[new_cluster]); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&cluster_lock[new_cluster]); | 
|  |  | 
|  | /* Recalc freq for old cluster when switching clusters */ | 
|  | if (old_cluster != new_cluster) { | 
|  | /* Switch cluster */ | 
|  | bL_switch_request(cpu, new_cluster); | 
|  |  | 
|  | mutex_lock(&cluster_lock[old_cluster]); | 
|  |  | 
|  | /* Set freq of old cluster if there are cpus left on it */ | 
|  | new_rate = find_cluster_maxfreq(old_cluster); | 
|  | new_rate = ACTUAL_FREQ(old_cluster, new_rate); | 
|  |  | 
|  | if (new_rate && | 
|  | clk_set_rate(clk[old_cluster], new_rate * 1000)) { | 
|  | pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", | 
|  | __func__, ret, old_cluster); | 
|  | } | 
|  | mutex_unlock(&cluster_lock[old_cluster]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Set clock frequency */ | 
|  | static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy, | 
|  | unsigned int index) | 
|  | { | 
|  | u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster; | 
|  | unsigned int freqs_new; | 
|  |  | 
|  | cur_cluster = cpu_to_cluster(cpu); | 
|  | new_cluster = actual_cluster = per_cpu(physical_cluster, cpu); | 
|  |  | 
|  | freqs_new = freq_table[cur_cluster][index].frequency; | 
|  |  | 
|  | if (is_bL_switching_enabled()) { | 
|  | if (actual_cluster == A15_CLUSTER && freqs_new < clk_big_min) | 
|  | new_cluster = A7_CLUSTER; | 
|  | else if (actual_cluster == A7_CLUSTER && | 
|  | freqs_new > clk_little_max) | 
|  | new_cluster = A15_CLUSTER; | 
|  | } | 
|  |  | 
|  | return ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster, | 
|  | freqs_new); | 
|  | } | 
|  |  | 
|  | static inline u32 get_table_count(struct cpufreq_frequency_table *table) | 
|  | { | 
|  | int count; | 
|  |  | 
|  | for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++) | 
|  | ; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* get the minimum frequency in the cpufreq_frequency_table */ | 
|  | static inline u32 get_table_min(struct cpufreq_frequency_table *table) | 
|  | { | 
|  | struct cpufreq_frequency_table *pos; | 
|  | u32 min_freq = ~0; | 
|  |  | 
|  | cpufreq_for_each_entry(pos, table) | 
|  | if (pos->frequency < min_freq) | 
|  | min_freq = pos->frequency; | 
|  | return min_freq; | 
|  | } | 
|  |  | 
|  | /* get the maximum frequency in the cpufreq_frequency_table */ | 
|  | static inline u32 get_table_max(struct cpufreq_frequency_table *table) | 
|  | { | 
|  | struct cpufreq_frequency_table *pos; | 
|  | u32 max_freq = 0; | 
|  |  | 
|  | cpufreq_for_each_entry(pos, table) | 
|  | if (pos->frequency > max_freq) | 
|  | max_freq = pos->frequency; | 
|  | return max_freq; | 
|  | } | 
|  |  | 
|  | static bool search_frequency(struct cpufreq_frequency_table *table, int size, | 
|  | unsigned int freq) | 
|  | { | 
|  | int count; | 
|  |  | 
|  | for (count = 0; count < size; count++) { | 
|  | if (table[count].frequency == freq) | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int merge_cluster_tables(void) | 
|  | { | 
|  | int i, j, k = 0, count = 1; | 
|  | struct cpufreq_frequency_table *table; | 
|  |  | 
|  | for (i = 0; i < MAX_CLUSTERS; i++) | 
|  | count += get_table_count(freq_table[i]); | 
|  |  | 
|  | table = kcalloc(count, sizeof(*table), GFP_KERNEL); | 
|  | if (!table) | 
|  | return -ENOMEM; | 
|  |  | 
|  | freq_table[MAX_CLUSTERS] = table; | 
|  |  | 
|  | /* Add in reverse order to get freqs in increasing order */ | 
|  | for (i = MAX_CLUSTERS - 1; i >= 0; i--, count = k) { | 
|  | for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END; | 
|  | j++) { | 
|  | if (i == A15_CLUSTER && | 
|  | search_frequency(table, count, freq_table[i][j].frequency)) | 
|  | continue; /* skip duplicates */ | 
|  | table[k++].frequency = | 
|  | VIRT_FREQ(i, freq_table[i][j].frequency); | 
|  | } | 
|  | } | 
|  |  | 
|  | table[k].driver_data = k; | 
|  | table[k].frequency = CPUFREQ_TABLE_END; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void _put_cluster_clk_and_freq_table(struct device *cpu_dev, | 
|  | const struct cpumask *cpumask) | 
|  | { | 
|  | u32 cluster = raw_cpu_to_cluster(cpu_dev->id); | 
|  |  | 
|  | if (!freq_table[cluster]) | 
|  | return; | 
|  |  | 
|  | clk_put(clk[cluster]); | 
|  | dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); | 
|  | } | 
|  |  | 
|  | static void put_cluster_clk_and_freq_table(struct device *cpu_dev, | 
|  | const struct cpumask *cpumask) | 
|  | { | 
|  | u32 cluster = cpu_to_cluster(cpu_dev->id); | 
|  | int i; | 
|  |  | 
|  | if (atomic_dec_return(&cluster_usage[cluster])) | 
|  | return; | 
|  |  | 
|  | if (cluster < MAX_CLUSTERS) | 
|  | return _put_cluster_clk_and_freq_table(cpu_dev, cpumask); | 
|  |  | 
|  | for_each_present_cpu(i) { | 
|  | struct device *cdev = get_cpu_device(i); | 
|  |  | 
|  | if (!cdev) | 
|  | return; | 
|  |  | 
|  | _put_cluster_clk_and_freq_table(cdev, cpumask); | 
|  | } | 
|  |  | 
|  | /* free virtual table */ | 
|  | kfree(freq_table[cluster]); | 
|  | } | 
|  |  | 
|  | static int _get_cluster_clk_and_freq_table(struct device *cpu_dev, | 
|  | const struct cpumask *cpumask) | 
|  | { | 
|  | u32 cluster = raw_cpu_to_cluster(cpu_dev->id); | 
|  | int ret; | 
|  |  | 
|  | if (freq_table[cluster]) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * platform specific SPC code must initialise the opp table | 
|  | * so just check if the OPP count is non-zero | 
|  | */ | 
|  | ret = dev_pm_opp_get_opp_count(cpu_dev) <= 0; | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | clk[cluster] = clk_get(cpu_dev, NULL); | 
|  | if (!IS_ERR(clk[cluster])) | 
|  | return 0; | 
|  |  | 
|  | dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n", | 
|  | __func__, cpu_dev->id, cluster); | 
|  | ret = PTR_ERR(clk[cluster]); | 
|  | dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); | 
|  |  | 
|  | out: | 
|  | dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__, | 
|  | cluster); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int get_cluster_clk_and_freq_table(struct device *cpu_dev, | 
|  | const struct cpumask *cpumask) | 
|  | { | 
|  | u32 cluster = cpu_to_cluster(cpu_dev->id); | 
|  | int i, ret; | 
|  |  | 
|  | if (atomic_inc_return(&cluster_usage[cluster]) != 1) | 
|  | return 0; | 
|  |  | 
|  | if (cluster < MAX_CLUSTERS) { | 
|  | ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask); | 
|  | if (ret) | 
|  | atomic_dec(&cluster_usage[cluster]); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get data for all clusters and fill virtual cluster with a merge of | 
|  | * both | 
|  | */ | 
|  | for_each_present_cpu(i) { | 
|  | struct device *cdev = get_cpu_device(i); | 
|  |  | 
|  | if (!cdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = _get_cluster_clk_and_freq_table(cdev, cpumask); | 
|  | if (ret) | 
|  | goto put_clusters; | 
|  | } | 
|  |  | 
|  | ret = merge_cluster_tables(); | 
|  | if (ret) | 
|  | goto put_clusters; | 
|  |  | 
|  | /* Assuming 2 cluster, set clk_big_min and clk_little_max */ | 
|  | clk_big_min = get_table_min(freq_table[A15_CLUSTER]); | 
|  | clk_little_max = VIRT_FREQ(A7_CLUSTER, | 
|  | get_table_max(freq_table[A7_CLUSTER])); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | put_clusters: | 
|  | for_each_present_cpu(i) { | 
|  | struct device *cdev = get_cpu_device(i); | 
|  |  | 
|  | if (!cdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | _put_cluster_clk_and_freq_table(cdev, cpumask); | 
|  | } | 
|  |  | 
|  | atomic_dec(&cluster_usage[cluster]); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Per-CPU initialization */ | 
|  | static int ve_spc_cpufreq_init(struct cpufreq_policy *policy) | 
|  | { | 
|  | u32 cur_cluster = cpu_to_cluster(policy->cpu); | 
|  | struct device *cpu_dev; | 
|  | int ret; | 
|  |  | 
|  | cpu_dev = get_cpu_device(policy->cpu); | 
|  | if (!cpu_dev) { | 
|  | pr_err("%s: failed to get cpu%d device\n", __func__, | 
|  | policy->cpu); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (cur_cluster < MAX_CLUSTERS) { | 
|  | int cpu; | 
|  |  | 
|  | dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus); | 
|  |  | 
|  | for_each_cpu(cpu, policy->cpus) | 
|  | per_cpu(physical_cluster, cpu) = cur_cluster; | 
|  | } else { | 
|  | /* Assumption: during init, we are always running on A15 */ | 
|  | per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER; | 
|  | } | 
|  |  | 
|  | ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | policy->freq_table = freq_table[cur_cluster]; | 
|  | policy->cpuinfo.transition_latency = 1000000; /* 1 ms */ | 
|  |  | 
|  | if (is_bL_switching_enabled()) | 
|  | per_cpu(cpu_last_req_freq, policy->cpu) = | 
|  | clk_get_cpu_rate(policy->cpu); | 
|  |  | 
|  | dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ve_spc_cpufreq_exit(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct device *cpu_dev; | 
|  |  | 
|  | cpu_dev = get_cpu_device(policy->cpu); | 
|  | if (!cpu_dev) { | 
|  | pr_err("%s: failed to get cpu%d device\n", __func__, | 
|  | policy->cpu); | 
|  | return; | 
|  | } | 
|  |  | 
|  | put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus); | 
|  | } | 
|  |  | 
|  | static struct cpufreq_driver ve_spc_cpufreq_driver = { | 
|  | .name			= "vexpress-spc", | 
|  | .flags			= CPUFREQ_HAVE_GOVERNOR_PER_POLICY | | 
|  | CPUFREQ_NEED_INITIAL_FREQ_CHECK, | 
|  | .verify			= cpufreq_generic_frequency_table_verify, | 
|  | .target_index		= ve_spc_cpufreq_set_target, | 
|  | .get			= ve_spc_cpufreq_get_rate, | 
|  | .init			= ve_spc_cpufreq_init, | 
|  | .exit			= ve_spc_cpufreq_exit, | 
|  | .register_em		= cpufreq_register_em_with_opp, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_BL_SWITCHER | 
|  | static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb, | 
|  | unsigned long action, void *_arg) | 
|  | { | 
|  | pr_debug("%s: action: %ld\n", __func__, action); | 
|  |  | 
|  | switch (action) { | 
|  | case BL_NOTIFY_PRE_ENABLE: | 
|  | case BL_NOTIFY_PRE_DISABLE: | 
|  | cpufreq_unregister_driver(&ve_spc_cpufreq_driver); | 
|  | break; | 
|  |  | 
|  | case BL_NOTIFY_POST_ENABLE: | 
|  | set_switching_enabled(true); | 
|  | cpufreq_register_driver(&ve_spc_cpufreq_driver); | 
|  | break; | 
|  |  | 
|  | case BL_NOTIFY_POST_DISABLE: | 
|  | set_switching_enabled(false); | 
|  | cpufreq_register_driver(&ve_spc_cpufreq_driver); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block bL_switcher_notifier = { | 
|  | .notifier_call = bL_cpufreq_switcher_notifier, | 
|  | }; | 
|  |  | 
|  | static int __bLs_register_notifier(void) | 
|  | { | 
|  | return bL_switcher_register_notifier(&bL_switcher_notifier); | 
|  | } | 
|  |  | 
|  | static int __bLs_unregister_notifier(void) | 
|  | { | 
|  | return bL_switcher_unregister_notifier(&bL_switcher_notifier); | 
|  | } | 
|  | #else | 
|  | static int __bLs_register_notifier(void) { return 0; } | 
|  | static int __bLs_unregister_notifier(void) { return 0; } | 
|  | #endif | 
|  |  | 
|  | static int ve_spc_cpufreq_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret, i; | 
|  |  | 
|  | set_switching_enabled(bL_switcher_get_enabled()); | 
|  |  | 
|  | for (i = 0; i < MAX_CLUSTERS; i++) | 
|  | mutex_init(&cluster_lock[i]); | 
|  |  | 
|  | if (!is_bL_switching_enabled()) | 
|  | ve_spc_cpufreq_driver.flags |= CPUFREQ_IS_COOLING_DEV; | 
|  |  | 
|  | ret = cpufreq_register_driver(&ve_spc_cpufreq_driver); | 
|  | if (ret) { | 
|  | pr_info("%s: Failed registering platform driver: %s, err: %d\n", | 
|  | __func__, ve_spc_cpufreq_driver.name, ret); | 
|  | } else { | 
|  | ret = __bLs_register_notifier(); | 
|  | if (ret) | 
|  | cpufreq_unregister_driver(&ve_spc_cpufreq_driver); | 
|  | else | 
|  | pr_info("%s: Registered platform driver: %s\n", | 
|  | __func__, ve_spc_cpufreq_driver.name); | 
|  | } | 
|  |  | 
|  | bL_switcher_put_enabled(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ve_spc_cpufreq_remove(struct platform_device *pdev) | 
|  | { | 
|  | bL_switcher_get_enabled(); | 
|  | __bLs_unregister_notifier(); | 
|  | cpufreq_unregister_driver(&ve_spc_cpufreq_driver); | 
|  | bL_switcher_put_enabled(); | 
|  | pr_info("%s: Un-registered platform driver: %s\n", __func__, | 
|  | ve_spc_cpufreq_driver.name); | 
|  | } | 
|  |  | 
|  | static struct platform_driver ve_spc_cpufreq_platdrv = { | 
|  | .driver = { | 
|  | .name	= "vexpress-spc-cpufreq", | 
|  | }, | 
|  | .probe		= ve_spc_cpufreq_probe, | 
|  | .remove		= ve_spc_cpufreq_remove, | 
|  | }; | 
|  | module_platform_driver(ve_spc_cpufreq_platdrv); | 
|  |  | 
|  | MODULE_ALIAS("platform:vexpress-spc-cpufreq"); | 
|  | MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); | 
|  | MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); | 
|  | MODULE_DESCRIPTION("Vexpress SPC ARM big LITTLE cpufreq driver"); | 
|  | MODULE_LICENSE("GPL v2"); |