| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Definitions of SCSI sense keys, additional sense codes and additional sense | |
| * code qualifiers. | |
| */ | |
| #ifndef _SCSI_SENSE_H_ | |
| #define _SCSI_SENSE_H_ | |
| #include <linux/types.h> | |
| /* | |
| * Sense keys. | |
| * See: https://www.t10.org/lists/2sensekey.htm | |
| */ | |
| enum scsi_sense_key { | |
| NO_SENSE = 0x00, | |
| RECOVERED_ERROR = 0x01, | |
| NOT_READY = 0x02, | |
| MEDIUM_ERROR = 0x03, | |
| HARDWARE_ERROR = 0x04, | |
| ILLEGAL_REQUEST = 0x05, | |
| UNIT_ATTENTION = 0x06, | |
| DATA_PROTECT = 0x07, | |
| BLANK_CHECK = 0x08, | |
| VENDOR_SPECIFIC = 0x09, | |
| COPY_ABORTED = 0x0a, | |
| ABORTED_COMMAND = 0x0b, | |
| VOLUME_OVERFLOW = 0x0d, | |
| MISCOMPARE = 0x0e, | |
| COMPLETED = 0x0f, | |
| }; | |
| #define SCSI_ASC_DEF(name) ASC_##name | |
| #define SCSI_ASC(name, code) \ | |
| SCSI_ASC_DEF(name) = (code), \ | |
| name = ((code) << 8) | 0x00 | |
| /* | |
| * SCSI additional sense codes and sense codes qualifiers. | |
| * See: https://www.t10.org/lists/asc-num.txt | |
| * Additional sense codes and their qualifiers are combined as a single value | |
| * equal to (ASC << 8) | ASCQ. | |
| * | |
| * The definitions are sorted in increasing sense code value order with a naming | |
| * following as close as possible the exact naming used in T10. To avoid | |
| * excessively long code lines when using these macros, some long ASC/ASCQ | |
| * combination names are shortened (E.g. LOGICAL_UNIT_xxx -> LU_xxx). | |
| * Very generic ASC names that potentially may clash with other macros elsewhere | |
| * are prefixed with "SSC_" (e.g. WARNING and WRITE_ERROR). | |
| */ | |
| enum scsi_sense_code { | |
| SCSI_ASC(NO_ADDITIONAL_SENSE_INFORMATION, 0x00), | |
| FILEMARK_DETECTED = 0x0001, | |
| END_OF_PARTITION_MEDIUM_DETECTED = 0x0002, | |
| SETMARK_DETECTED = 0x0003, | |
| BEGINNING_OF_PARTITION_MEDIUM_DETECTED = 0x0004, | |
| END_OF_DATA_DETECTED = 0x0005, | |
| IO_PROCESS_TERMINATED = 0x0006, | |
| PROGRAMMABLE_EARLY_WARNING_DETECTED = 0x0007, | |
| AUDIO_PLAY_OP_IN_PROGRESS = 0x0011, | |
| AUDIO_PLAY_OP_PAUSED = 0x0012, | |
| AUDIO_PLAY_OP_SUCCESSFULLY_COMPLETED = 0x0013, | |
| AUDIO_PLAY_OP_STOPPED_DUE_TO_ERROR = 0x0014, | |
| NO_CURRENT_AUDIO_STATUS_TO_RETURN = 0x0015, | |
| OP_IN_PROGRESS = 0x0016, | |
| CLEANING_REQUESTED = 0x0017, | |
| ERASE_OP_IN_PROGRESS = 0x0018, | |
| LOCATE_OP_IN_PROGRESS = 0x0019, | |
| REWIND_OP_IN_PROGRESS = 0x001A, | |
| SET_CAPACITY_OP_IN_PROGRESS = 0x001B, | |
| VERIFY_OP_IN_PROGRESS = 0x001C, | |
| ATA_PASS_THROUGH_INFORMATION_AVAILABLE = 0x001D, | |
| CONFLICTING_SA_CREATION_REQUEST = 0x001E, | |
| LU_TRANSITIONING_TO_ANOTHER_POWER_CONDITION = 0x001F, | |
| EXTENDED_COPY_INFORMATION_AVAILABLE = 0x0020, | |
| ATOMIC_COMMAND_ABORTED_DUE_TO_ACA = 0x0021, | |
| DEFERRED_MICROCODE_IS_PENDING = 0x0022, | |
| OVERLAPPING_ATOMIC_COMMAND_IN_PROGRESS = 0x0023, | |
| SCSI_ASC(NO_INDEX_SECTOR_SIGNAL, 0x01), | |
| SCSI_ASC(NO_SEEK_COMPLETE, 0x02), | |
| SCSI_ASC(PERIPHERAL_DEVICE_WRITE_FAULT, 0x03), | |
| NO_WRITE_CURRENT = 0x0301, | |
| EXCESSIVE_WRITE_ERRORS = 0x0302, | |
| SCSI_ASC(LU_NOT_READY, 0x04), | |
| LU_IS_IN_PROCESS_OF_BECOMING_READY = 0x0401, | |
| LU_NOT_READY_INITIALIZING_COMMAND_REQUIRED = 0x0402, | |
| LU_NOT_READY_MANUAL_INTERVENTION_REQUIRED = 0x0403, | |
| LU_NOT_READY_FORMAT_IN_PROGRESS = 0x0404, | |
| LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405, | |
| LU_NOT_READY_RECALCULATION_IN_PROGRESS = 0x0406, | |
| LU_NOT_READY_OP_IN_PROGRESS = 0x0407, | |
| LU_NOT_READY_LONG_WRITE_IN_PROGRESS = 0x0408, | |
| LU_NOT_READY_SELFTEST_IN_PROGRESS = 0x0409, | |
| LU_NOT_ACCESSIBLE_ASYMMETRIC_ACCESS_STATE_TRANSITION = 0x040A, | |
| LU_NOT_ACCESSIBLE_TARGET_PORT_IN_STANDBY_STATE = 0x040B, | |
| LU_NOT_ACCESSIBLE_TARGET_PORT_IN_UNAVAILABLE_STATE = 0x040C, | |
| LU_NOT_READY_STRUCTURE_CHECK_REQUIRED = 0x040D, | |
| LU_NOT_READY_SECURITY_SESSION_IN_PROGRESS = 0x040E, | |
| LU_NOT_READY_AUXILIARY_MEMORY_NOT_ACCESSIBLE = 0x0410, | |
| LU_NOT_READY_NOTIFY_REQUIRED = 0x0411, | |
| LU_NOT_READY_OFFLINE = 0x0412, | |
| LU_NOT_READY_SA_CREATION_IN_PROGRESS = 0x0413, | |
| LU_NOT_READY_SPACE_ALLOCATION_IN_PROGRESS = 0x0414, | |
| LU_NOT_READY_ROBOTICS_DISABLED = 0x0415, | |
| LU_NOT_READY_CONFIG_REQUIRED = 0x0416, | |
| LU_NOT_READY_CALIBRATION_REQUIRED = 0x0417, | |
| LU_NOT_READY_A_DOOR_IS_OPEN = 0x0418, | |
| LU_NOT_READY_OPERATING_IN_SEQUENTIAL_MODE = 0x0419, | |
| LU_NOT_READY_START_STOP_UNIT_COMMAND_IN_PROGRESS = 0x041A, | |
| LU_NOT_READY_SANITIZE_IN_PROGRESS = 0x041B, | |
| LU_NOT_READY_ADDITIONAL_POWER_USE_NOT_YET_GRANTED = 0x041C, | |
| LU_NOT_READY_CONFIG_IN_PROGRESS = 0x041D, | |
| LU_NOT_READY_MICROCODE_ACTIVATION_REQUIRED = 0x041E, | |
| LU_NOT_READY_MICROCODE_DOWNLOAD_REQUIRED = 0x041F, | |
| LU_NOT_READY_LU_RESET_REQUIRED = 0x0420, | |
| LU_NOT_READY_HARD_RESET_REQUIRED = 0x0421, | |
| LU_NOT_READY_POWER_CYCLE_REQUIRED = 0x0422, | |
| LU_NOT_READY_AFFILIATION_REQUIRED = 0x0423, | |
| DEPOPULATION_IN_PROGRESS = 0x0424, | |
| DEPOPULATION_RESTORATION_IN_PROGRESS = 0x0425, | |
| SCSI_ASC(LU_DOES_NOT_RESPOND_TO_SELECTION, 0x05), | |
| SCSI_ASC(NO_REFERENCE_POSITION_FOUND, 0x06), | |
| SCSI_ASC(MULTIPLE_PERIPHERAL_DEVICES_SELECTED, 0x07), | |
| SCSI_ASC(LU_COMMUNICATION_FAILURE, 0x08), | |
| LU_COMMUNICATION_TIMEOUT = 0x0801, | |
| LU_COMMUNICATION_PARITY_ERROR = 0x0802, | |
| LU_COMMUNICATION_CRC_ERROR = 0x0803, | |
| UNREACHABLE_COPY_TARGET = 0x0804, | |
| SCSI_ASC(TRACK_FOLLOWING_ERROR, 0x09), | |
| TRACKING_SERVO_FAILURE = 0x0901, | |
| FOCUS_SERVO_FAILURE = 0x0902, | |
| SPINDLE_SERVO_FAILURE = 0x0903, | |
| HEAD_SELECT_FAULT = 0x0904, | |
| VIBRATION_INDUCED_TRACKING_ERROR = 0x0905, | |
| SCSI_ASC(ERROR_LOG_OVERFLOW, 0x0A), | |
| SCSI_ASC(SSC_WARNING, 0x0B), | |
| WARNING_SPECIFIED_TEMPERATURE_EXCEEDED = 0x0B01, | |
| WARNING_ENCLOSURE_DEGRADED = 0x0B02, | |
| WARNING_BACKGROUND_SELFTEST_FAILED = 0x0B03, | |
| WARNING_BACKGROUND_PRESCAN_DETECTED_MEDIUM_ERROR = 0x0B04, | |
| WARNING_BACKGROUND_MEDIUM_SCAN_DETECTED_MEDIUM_ERROR = 0x0B05, | |
| WARNING_NONVOLATILE_CACHE_NOW_VOLATILE = 0x0B06, | |
| WARNING_DEGRADED_POWER_TO_NONVOLATILE_CACHE = 0x0B07, | |
| WARNING_POWER_LOSS_EXPECTED = 0x0B08, | |
| WARNING_DEVICE_STATISTICS_NOTIFICATION_ACTIVE = 0x0B09, | |
| WARNING_HIGH_CRITICAL_TEMPERATURE_LIMIT_EXCEEDED = 0x0B0A, | |
| WARNING_LOW_CRITICAL_TEMPERATURE_LIMIT_EXCEEDED = 0x0B0B, | |
| WARNING_HIGH_OPERATING_TEMPERATURE_LIMIT_EXCEEDED = 0x0B0C, | |
| WARNING_LOW_OPERATING_TEMPERATURE_LIMIT_EXCEEDED = 0x0B0D, | |
| WARNING_HIGH_CRITICAL_HUMIDITY_LIMIT_EXCEEDED = 0x0B0E, | |
| WARNING_LOW_CRITICAL_HUMIDITY_LIMIT_EXCEEDED = 0x0B0F, | |
| WARNING_HIGH_OPERATING_HUMIDITY_LIMIT_EXCEEDED = 0x0B10, | |
| WARNING_LOW_OPERATING_HUMIDITY_LIMIT_EXCEEDED = 0x0B11, | |
| WARNING_MICROCODE_SECURITY_AT_RISK = 0x0B12, | |
| WARNING_MICROCODE_DIGITAL_SIGNATURE_VALIDATION_FAILURE = 0x0B13, | |
| WARNING_PHYSICAL_ELEMENT_STATUS_CHANGE = 0x0B14, | |
| /* Defined as "WRITE ERROR" in T10. */ | |
| SCSI_ASC(SSC_WRITE_ERROR, 0x0C), | |
| WRITE_ERROR_RECOVERED_WITH_AUTO_REALLOCATION = 0x0C01, | |
| WRITE_ERROR_AUTO_REALLOCATION_FAILED = 0x0C02, | |
| WRITE_ERROR_RECOMMEND_REASSIGNMENT = 0x0C03, | |
| COMPRESSION_CHECK_MISCOMPARE_ERROR = 0x0C04, | |
| DATA_EXPANSION_OCCURRED_DURING_COMPRESSION = 0x0C05, | |
| BLOCK_NOT_COMPRESSIBLE = 0x0C06, | |
| WRITE_ERROR_RECOVERY_NEEDED = 0x0C07, | |
| WRITE_ERROR_RECOVERY_FAILED = 0x0C08, | |
| WRITE_ERROR_LOSS_OF_STREAMING = 0x0C09, | |
| WRITE_ERROR_PADDING_BLOCKS_ADDED = 0x0C0A, | |
| AUXILIARY_MEMORY_WRITE_ERROR = 0x0C0B, | |
| WRITE_ERROR_UNEXPECTED_UNSOLICITED_DATA = 0x0C0C, | |
| WRITE_ERROR_NOT_ENOUGH_UNSOLICITED_DATA = 0x0C0D, | |
| MULTIPLE_WRITE_ERRORS = 0x0C0E, | |
| DEFECTS_IN_ERROR_WINDOW = 0x0C0F, | |
| INCOMPLETE_MULTIPLE_ATOMIC_WRITE_OPERATIONS = 0x0C10, | |
| WRITE_ERROR_RECOVERY_SCAN_NEEDED = 0x0C11, | |
| WRITE_ERROR_INSUFFICIENT_ZONE_RESOURCES = 0x0C12, | |
| SCSI_ASC(ERROR_DETECTED_BY_THIRD_PARTY_TEMPORARY_INITIATOR, 0x0D), | |
| THIRD_PARTY_DEVICE_FAILURE = 0x0D01, | |
| COPY_TARGET_DEVICE_NOT_REACHABLE = 0x0D02, | |
| INCORRECT_COPY_TARGET_DEVICE_TYPE = 0x0D03, | |
| COPY_TARGET_DEVICE_DATA_UNDERRUN = 0x0D04, | |
| COPY_TARGET_DEVICE_DATA_OVERRUN = 0x0D05, | |
| SCSI_ASC(INVALID_INFORMATION_UNIT, 0x0E), | |
| INFORMATION_UNIT_TOO_SHORT = 0x0E01, | |
| INFORMATION_UNIT_TOO_LONG = 0x0E02, | |
| INVALID_FIELD_IN_COMMAND_INFORMATION_UNIT = 0x0E03, | |
| SCSI_ASC(ID_CRC_OR_ECC_ERROR, 0x10), | |
| LOGICAL_BLOCK_GUARD_CHECK_FAILED = 0x1001, | |
| LOGICAL_BLOCK_APPLICATION_TAG_CHECK_FAILED = 0x1002, | |
| LOGICAL_BLOCK_REFERENCE_TAG_CHECK_FAILED = 0x1003, | |
| LOGICAL_BLOCK_PROTECTION_ERROR_ON_RECOVER_BUFFERED_DATA = 0x1004, | |
| LOGICAL_BLOCK_PROTECTION_METHOD_ERROR = 0x1005, | |
| SCSI_ASC(UNRECOVERED_READ_ERROR, 0x11), | |
| READ_RETRIES_EXHAUSTED = 0x1101, | |
| ERROR_TOO_LONG_TO_CORRECT = 0x1102, | |
| MULTIPLE_READ_ERRORS = 0x1103, | |
| UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAILED = 0x1104, | |
| LEC_UNCORRECTABLE_ERROR = 0x1105, | |
| CIRC_UNRECOVERED_ERROR = 0x1106, | |
| DATA_RESYNCHRONIZATION_ERROR = 0x1107, | |
| INCOMPLETE_BLOCK_READ = 0x1108, | |
| NO_GAP_FOUND = 0x1109, | |
| MISCORRECTED_ERROR = 0x110A, | |
| UNRECOVERED_READ_ERROR_RECOMMEND_REASSIGNMENT = 0x110B, | |
| UNRECOVERED_READ_ERROR_RECOMMEND_REWRITE_THE_DATA = 0x110C, | |
| DECOMPRESSION_CRC_ERROR = 0x110D, | |
| CANNOT_DECOMPRESS_USING_DECLARED_ALGORITHM = 0x110E, | |
| ERROR_READING_UPC_EAN_NUMBER = 0x110F, | |
| ERROR_READING_ISRC_NUMBER = 0x1110, | |
| READ_ERROR_LOSS_OF_STREAMING = 0x1111, | |
| AUXILIARY_MEMORY_READ_ERROR = 0x1112, | |
| READ_ERROR_FAILED_RETRANSMISSION_REQUEST = 0x1113, | |
| READ_ERROR_LBA_MARKED_BAD_BY_APPLICATION_CLIENT = 0x1114, | |
| WRITE_AFTER_SANITIZE_REQUIRED = 0x1115, | |
| SCSI_ASC(ADDRESS_MARK_NOT_FOUND_FOR_ID_FIELD, 0x12), | |
| SCSI_ASC(ADDRESS_MARK_NOT_FOUND_FOR_DATA_FIELD, 0x13), | |
| SCSI_ASC(RECORDED_ENTITY_NOT_FOUND, 0x14), | |
| RECORD_NOT_FOUND = 0x1401, | |
| FILEMARK_OR_SETMARK_NOT_FOUND = 0x1402, | |
| END_OF_DATA_NOT_FOUND = 0x1403, | |
| BLOCK_SEQUENCE_ERROR = 0x1404, | |
| RECORD_NOT_FOUND_RECOMMEND_REASSIGNMENT = 0x1405, | |
| RECORD_NOT_FOUND_DATA_AUTO_REALLOCATED = 0x1406, | |
| LOCATE_OPERATION_FAILURE = 0x1407, | |
| SCSI_ASC(RANDOM_POSITIONING_ERROR, 0x15), | |
| MECHANICAL_POSITIONING_ERROR = 0x1501, | |
| POSITIONING_ERROR_DETECTED_BY_READ_OF_MEDIUM = 0x1502, | |
| SCSI_ASC(DATA_SYNCHRONIZATION_MARK_ERROR, 0x16), | |
| DATA_SYNC_ERROR_DATA_REWRITTEN = 0x1601, | |
| DATA_SYNC_ERROR_RECOMMEND_REWRITE = 0x1602, | |
| DATA_SYNC_ERROR_DATA_AUTO_REALLOCATED = 0x1603, | |
| DATA_SYNC_ERROR_RECOMMEND_REASSIGNMENT = 0x1604, | |
| SCSI_ASC(RECOVERED_DATA_WITH_NO_ERROR_CORRECTION_APPLIED, 0x17), | |
| RECOVERED_DATA_WITH_RETRIES = 0x1701, | |
| RECOVERED_DATA_WITH_POSITIVE_HEAD_OFFSET = 0x1702, | |
| RECOVERED_DATA_WITH_NEGATIVE_HEAD_OFFSET = 0x1703, | |
| RECOVERED_DATA_WITH_RETRIES_AND_OR_CIRC_APPLIED = 0x1704, | |
| RECOVERED_DATA_USING_PREVIOUS_SECTOR_ID = 0x1705, | |
| RECOVERED_DATA_WITHOUT_ECC_DATA_AUTO_REALLOCATED = 0x1706, | |
| RECOVERED_DATA_WITHOUT_ECC_RECOMMEND_REASSIGNMENT = 0x1707, | |
| RECOVERED_DATA_WITHOUT_ECC_RECOMMEND_REWRITE = 0x1708, | |
| RECOVERED_DATA_WITHOUT_ECC_DATA_REWRITTEN = 0x1709, | |
| SCSI_ASC(RECOVERED_DATA_WITH_ERROR_CORRECTION_APPLIED, 0x18), | |
| RECOVERED_DATA_WITH_ERROR_CORRECTION_RETRIES_APPLIED = 0x1801, | |
| RECOVERED_DATA_DATA_AUTO_REALLOCATED = 0x1802, | |
| RECOVERED_DATA_WITH_CIRC = 0x1803, | |
| RECOVERED_DATA_WITH_LEC = 0x1804, | |
| RECOVERED_DATA_RECOMMEND_REASSIGNMENT = 0x1805, | |
| RECOVERED_DATA_RECOMMEND_REWRITE = 0x1806, | |
| RECOVERED_DATA_WITH_ECC_DATA_REWRITTEN = 0x1807, | |
| RECOVERED_DATA_WITH_LINKING = 0x1808, | |
| SCSI_ASC(DEFECT_LIST_ERROR, 0x19), | |
| DEFECT_LIST_NOT_AVAILABLE = 0x1901, | |
| DEFECT_LIST_ERROR_IN_PRIMARY_LIST = 0x1902, | |
| DEFECT_LIST_ERROR_IN_GROWN_LIST = 0x1903, | |
| SCSI_ASC(PARAMETER_LIST_LENGTH_ERROR, 0x1A), | |
| SCSI_ASC(SYNCHRONOUS_DATA_TRANSFER_ERROR, 0x1B), | |
| SCSI_ASC(DEFECT_LIST_NOT_FOUND, 0x1C), | |
| PRIMARY_DEFECT_LIST_NOT_FOUND = 0x1C01, | |
| GROWN_DEFECT_LIST_NOT_FOUND = 0x1C02, | |
| SCSI_ASC(MISCOMPARE_DURING_VERIFY_OPERATION, 0x1D), | |
| MISCOMPARE_VERIFY_OF_UNMAPPED_LBA = 0x1D01, | |
| SCSI_ASC(RECOVERED_ID_WITH_ECC_CORRECTION, 0x1E), | |
| SCSI_ASC(PARTIAL_DEFECT_LIST_TRANSFER, 0x1F), | |
| SCSI_ASC(INVALID_COMMAND_OP_CODE, 0x20), | |
| ACCESS_DENIED_INITIATOR_PENDING_ENROLLED = 0x2001, | |
| ACCESS_DENIED_NO_ACCESS_RIGHTS = 0x2002, | |
| ACCESS_DENIED_INVALID_MGMT_ID_KEY = 0x2003, | |
| ILLEGAL_COMMAND_WHILE_IN_WRITE_CAPABLE_STATE = 0x2004, | |
| ILLEGAL_COMMAND_WHILE_IN_EXPLICIT_ADDRESS_MODE = 0x2006, | |
| ILLEGAL_COMMAND_WHILE_IN_IMPLICIT_ADDRESS_MODE = 0x2007, | |
| ACCESS_DENIED_ENROLLMENT_CONFLICT = 0x2008, | |
| ACCESS_DENIED_INVALID_LU_IDENTIFIER = 0x2009, | |
| ACCESS_DENIED_INVALID_PROXY_TOKEN = 0x200A, | |
| ACCESS_DENIED_ACL_LUN_CONFLICT = 0x200B, | |
| ILLEGAL_COMMAND_WHEN_NOT_IN_APPEND_ONLY_MODE = 0x200C, | |
| NOT_AN_ADMINISTRATIVE_LOGICAL_UNIT = 0x200D, | |
| NOT_A_SUBSIDIARY_LOGICAL_UNIT = 0x200E, | |
| NOT_A_CONGLOMERATE_LOGICAL_UNIT = 0x200F, | |
| SCSI_ASC(LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, 0x21), | |
| INVALID_ELEMENT_ADDRESS = 0x2101, | |
| INVALID_ADDRESS_FOR_WRITE = 0x2102, | |
| INVALID_WRITE_CROSSING_LAYER_JUMP = 0x2103, | |
| UNALIGNED_WRITE_COMMAND = 0x2104, | |
| WRITE_BOUNDARY_VIOLATION = 0x2105, | |
| ATTEMPT_TO_READ_INVALID_DATA = 0x2106, | |
| READ_BOUNDARY_VIOLATION = 0x2107, | |
| MISALIGNED_WRITE_COMMAND = 0x2108, | |
| ATTEMPT_TO_ACCESS_GAP_ZONE = 0x2109, | |
| SCSI_ASC(ILLEGAL_FUNCTION, 0x22), | |
| SCSI_ASC(INVALID_TOKEN_OP, 0x23), | |
| INVALID_TOKEN_OP_UNSUPPORTED_TOKEN_TYPE = 0x2301, | |
| INVALID_TOKEN_OP_REMOTE_TOKEN_USAGE_NOT_SUPPORTED = 0x2302, | |
| INVALID_TOKEN_OP_REMOTE_ROD_TOKEN_CREATION_NOT_SUPPORTED = 0x2303, | |
| INVALID_TOKEN_OP_TOKEN_UNKNOWN = 0x2304, | |
| INVALID_TOKEN_OP_TOKEN_CORRUPT = 0x2305, | |
| INVALID_TOKEN_OP_TOKEN_REVOKED = 0x2306, | |
| INVALID_TOKEN_OP_TOKEN_EXPIRED = 0x2307, | |
| INVALID_TOKEN_OP_TOKEN_CANCELLED = 0x2308, | |
| INVALID_TOKEN_OP_TOKEN_DELETED = 0x2309, | |
| INVALID_TOKEN_OP_INVALID_TOKEN_LENGTH = 0x230A, | |
| SCSI_ASC(INVALID_FIELD_IN_CDB, 0x24), | |
| CDB_DECRYPTION_ERROR = 0x2401, | |
| SECURITY_AUDIT_VALUE_FROZEN = 0x2404, | |
| SECURITY_WORKING_KEY_FROZEN = 0x2405, | |
| NONCE_NOT_UNIQUE = 0x2406, | |
| NONCE_TIMESTAMP_OUT_OF_RANGE = 0x2407, | |
| INVALID_XCDB = 0x2408, | |
| INVALID_FAST_FORMAT = 0x2409, | |
| SCSI_ASC(LU_NOT_SUPPORTED, 0x25), | |
| SCSI_ASC(INVALID_FIELD_IN_PARAMETER_LIST, 0x26), | |
| PARAMETER_NOT_SUPPORTED = 0x2601, | |
| PARAMETER_VALUE_INVALID = 0x2602, | |
| THRESHOLD_PARAMETERS_NOT_SUPPORTED = 0x2603, | |
| INVALID_RELEASE_OF_PERSISTENT_RESERVATION = 0x2604, | |
| DATA_DECRYPTION_ERROR = 0x2605, | |
| TOO_MANY_TARGET_DESCRIPTORS = 0x2606, | |
| UNSUPPORTED_TARGET_DESCRIPTOR_TYPE_CODE = 0x2607, | |
| TOO_MANY_SEGMENT_DESCRIPTORS = 0x2608, | |
| UNSUPPORTED_SEGMENT_DESCRIPTOR_TYPE_CODE = 0x2609, | |
| UNEXPECTED_INEXACT_SEGMENT = 0x260A, | |
| INLINE_DATA_LENGTH_EXCEEDED = 0x260B, | |
| INVALID_OP_FOR_COPY_SOURCE_OR_DESTINATION = 0x260C, | |
| COPY_SEGMENT_GRANULARITY_VIOLATION = 0x260D, | |
| INVALID_PARAMETER_WHILE_PORT_IS_ENABLED = 0x260E, | |
| INVALID_DATA_OUT_BUFFER_INTEGRITY_CHECK_VALUE = 0x260F, | |
| DATA_DECRYPTION_KEY_FAIL_LIMIT_REACHED = 0x2610, | |
| INCOMPLETE_KEY_ASSOCIATED_DATA_SET = 0x2611, | |
| VENDOR_SPECIFIC_KEY_REFERENCE_NOT_FOUND = 0x2612, | |
| APPLICATION_TAG_MODE_PAGE_IS_INVALID = 0x2613, | |
| TAPE_STREAM_MIRRORING_PREVENTED = 0x2614, | |
| COPY_SOURCE_OR_COPY_DESTINATION_NOT_AUTHORIZED = 0x2615, | |
| FAST_COPY_NOT_POSSIBLE = 0x2616, | |
| SCSI_ASC(WRITE_PROTECTED, 0x27), | |
| HW_WRITE_PROTECTED = 0x2701, | |
| LU_SOFTWARE_WRITE_PROTECTED = 0x2702, | |
| ASSOCIATED_WRITE_PROTECT = 0x2703, | |
| PERSISTENT_WRITE_PROTECT = 0x2704, | |
| PERMANENT_WRITE_PROTECT = 0x2705, | |
| CONDITIONAL_WRITE_PROTECT = 0x2706, | |
| SPACE_ALLOCATION_FAILED_WRITE_PROTECT = 0x2707, | |
| ZONE_IS_READ_ONLY = 0x2708, | |
| SCSI_ASC(NOT_READY_TO_READY_CHANGE_MEDIUM_MAY_HAVE_CHANGED, 0x28), | |
| IMPORT_OR_EXPORT_ELEMENT_ACCESSED = 0x2801, | |
| FORMAT_LAYER_MAY_HAVE_CHANGED = 0x2802, | |
| IMPORT_EXPORT_ELEMENT_ACCESSED_MEDIUM_CHANGED = 0x2803, | |
| SCSI_ASC(POWER_ON_RESET_OR_BUS_DEVICE_RESET_OCCURRED, 0x29), | |
| POWER_ON_OCCURRED = 0x2901, | |
| SCSI_BUS_RESET_OCCURRED = 0x2902, | |
| BUS_DEVICE_RESET_FUNCTION_OCCURRED = 0x2903, | |
| DEVICE_INTERNAL_RESET = 0x2904, | |
| TRANSCEIVER_MODE_CHANGED_TO_SINGLE_ENDED = 0x2905, | |
| TRANSCEIVER_MODE_CHANGED_TO_LVD = 0x2906, | |
| I_T_NEXUS_LOSS_OCCURRED = 0x2907, | |
| SCSI_ASC(PARAMETERS_CHANGED, 0x2A), | |
| MODE_PARAMETERS_CHANGED = 0x2A01, | |
| LOG_PARAMETERS_CHANGED = 0x2A02, | |
| RESERVATIONS_PREEMPTED = 0x2A03, | |
| RESERVATIONS_RELEASED = 0x2A04, | |
| REGISTRATIONS_PREEMPTED = 0x2A05, | |
| ASYMMETRIC_ACCESS_STATE_CHANGED = 0x2A06, | |
| IMPLICIT_ASYMMETRIC_ACCESS_STATE_TRANSITION_FAILED = 0x2A07, | |
| PRIORITY_CHANGED = 0x2A08, | |
| CAPACITY_DATA_HAS_CHANGED = 0x2A09, | |
| ERROR_HISTORY_I_T_NEXUS_CLEARED = 0x2A0A, | |
| ERROR_HISTORY_SNAPSHOT_RELEASED = 0x2A0B, | |
| ERROR_RECOVERY_ATTRIBUTES_HAVE_CHANGED = 0x2A0C, | |
| DATA_ENCRYPTION_CAPABILITIES_CHANGED = 0x2A0D, | |
| TIMESTAMP_CHANGED = 0x2A10, | |
| DATA_ENCRYPTION_PARAMS_CHANGED_BY_ANOTHER_I_T_NEXUS = 0x2A11, | |
| DATA_ENCRYPTION_PARAMS_CHANGED_BY_VENDOR_SPECIFIC_EVENT = 0x2A12, | |
| DATA_ENCRYPTION_KEY_INSTANCE_COUNTER_HAS_CHANGED = 0x2A13, | |
| SA_CREATION_CAPABILITIES_DATA_HAS_CHANGED = 0x2A14, | |
| MEDIUM_REMOVAL_PREVENTION_PREEMPTED = 0x2A15, | |
| ZONE_RESET_WRITE_POINTER_RECOMMENDED = 0x2A16, | |
| SCSI_ASC(COPY_CANNOT_EXECUTE_SINCE_HOST_CANNOT_DISCONNECT, 0x2B), | |
| SCSI_ASC(COMMAND_SEQUENCE_ERROR, 0x2C), | |
| TOO_MANY_WINDOWS_SPECIFIED = 0x2C01, | |
| INVALID_COMBINATION_OF_WINDOWS_SPECIFIED = 0x2C02, | |
| CURRENT_PROGRAM_AREA_IS_NOT_EMPTY = 0x2C03, | |
| CURRENT_PROGRAM_AREA_IS_EMPTY = 0x2C04, | |
| ILLEGAL_POWER_CONDITION_REQUEST = 0x2C05, | |
| PERSISTENT_PREVENT_CONFLICT = 0x2C06, | |
| PREVIOUS_BUSY_STATUS = 0x2C07, | |
| PREVIOUS_TASK_SET_FULL_STATUS = 0x2C08, | |
| PREVIOUS_RESERVATION_CONFLICT_STATUS = 0x2C09, | |
| PARTITION_OR_COLLECTION_CONTAINS_USER_OBJECTS = 0x2C0A, | |
| NOT_RESERVED = 0x2C0B, | |
| ORWRITE_GENERATION_DOES_NOT_MATCH = 0x2C0C, | |
| RESET_WRITE_POINTER_NOT_ALLOWED = 0x2C0D, | |
| ZONE_IS_OFFLINE = 0x2C0E, | |
| STREAM_NOT_OPEN = 0x2C0F, | |
| UNWRITTEN_DATA_IN_ZONE = 0x2C10, | |
| DESCRIPTOR_FORMAT_SENSE_DATA_REQUIRED = 0x2C11, | |
| ZONE_IS_INACTIVE = 0x2C12, | |
| WELL_KNOWN_LU_ACCESS_REQUIRED = 0x2C13, | |
| SCSI_ASC(OVERWRITE_ERROR_ON_UPDATE_IN_PLACE, 0x2D), | |
| SCSI_ASC(INSUFFICIENT_TIME_FOR_OPERATION, 0x2E), | |
| COMMAND_TIMEOUT_BEFORE_PROCESSING = 0x2E01, | |
| COMMAND_TIMEOUT_DURING_PROCESSING = 0x2E02, | |
| COMMAND_TIMEOUT_DURING_PROCESSING_DUE_TO_ERROR_RECOVERY = 0x2E03, | |
| SCSI_ASC(COMMANDS_CLEARED_BY_ANOTHER_INITIATOR, 0x2F), | |
| COMMANDS_CLEARED_BY_POWER_LOSS_NOTIFICATION = 0x2F01, | |
| COMMANDS_CLEARED_BY_DEVICE_SERVER = 0x2F02, | |
| SOME_COMMANDS_CLEARED_BY_QUEUING_LAYER_EVENT = 0x2F03, | |
| SCSI_ASC(INCOMPATIBLE_MEDIUM_INSTALLED, 0x30), | |
| CANNOT_READ_MEDIUM_UNKNOWN_FORMAT = 0x3001, | |
| CANNOT_READ_MEDIUM_INCOMPATIBLE_FORMAT = 0x3002, | |
| CLEANING_CARTRIDGE_INSTALLED = 0x3003, | |
| CANNOT_WRITE_MEDIUM_UNKNOWN_FORMAT = 0x3004, | |
| CANNOT_WRITE_MEDIUM_INCOMPATIBLE_FORMAT = 0x3005, | |
| CANNOT_FORMAT_MEDIUM_INCOMPATIBLE_MEDIUM = 0x3006, | |
| CLEANING_FAILURE = 0x3007, | |
| CANNOT_WRITE_APPLICATION_CODE_MISMATCH = 0x3008, | |
| CURRENT_SESSION_NOT_FIXATED_FOR_APPEND = 0x3009, | |
| CLEANING_REQUEST_REJECTED = 0x300A, | |
| WORM_MEDIUM_OVERWRITE_ATTEMPTED = 0x300C, | |
| WORM_MEDIUM_INTEGRITY_CHECK = 0x300D, | |
| MEDIUM_NOT_FORMATTED = 0x3010, | |
| INCOMPATIBLE_VOLUME_TYPE = 0x3011, | |
| INCOMPATIBLE_VOLUME_QUALIFIER = 0x3012, | |
| CLEANING_VOLUME_EXPIRED = 0x3013, | |
| SCSI_ASC(MEDIUM_FORMAT_CORRUPTED, 0x31), | |
| FORMAT_COMMAND_FAILED = 0x3101, | |
| ZONED_FORMATTING_FAILED_DUE_TO_SPARE_LINKING = 0x3102, | |
| SANITIZE_COMMAND_FAILED = 0x3103, | |
| DEPOPULATION_FAILED = 0x3104, | |
| DEPOPULATION_RESTORATION_FAILED = 0x3105, | |
| SCSI_ASC(NO_DEFECT_SPARE_LOCATION_AVAILABLE, 0x32), | |
| DEFECT_LIST_UPDATE_FAILURE = 0x3201, | |
| SCSI_ASC(TAPE_LENGTH_ERROR, 0x33), | |
| SCSI_ASC(ENCLOSURE_FAILURE, 0x34), | |
| SCSI_ASC(ENCLOSURE_SERVICES_FAILURE, 0x35), | |
| UNSUPPORTED_ENCLOSURE_FUNCTION = 0x3501, | |
| ENCLOSURE_SERVICES_UNAVAILABLE = 0x3502, | |
| ENCLOSURE_SERVICES_TRANSFER_FAILURE = 0x3503, | |
| ENCLOSURE_SERVICES_TRANSFER_REFUSED = 0x3504, | |
| ENCLOSURE_SERVICES_CHECKSUM_ERROR = 0x3505, | |
| SCSI_ASC(RIBBON_INK_OR_TONER_FAILURE, 0x36), | |
| SCSI_ASC(ROUNDED_PARAMETER, 0x37), | |
| SCSI_ASC(EVENT_STATUS_NOTIFICATION, 0x38), | |
| ESN_POWER_MANAGEMENT_CLASS_EVENT = 0x3802, | |
| ESN_MEDIA_CLASS_EVENT = 0x3804, | |
| ESN_DEVICE_BUSY_CLASS_EVENT = 0x3806, | |
| THIN_PROVISIONING_SOFT_THRESHOLD_REACHED = 0x3807, | |
| DEPOPULATION_INTERRUPTED = 0x3808, | |
| DEPOPULATION_RESTORATION_INTERRUPTED = 0x3809, | |
| SCSI_ASC(SAVING_PARAMETERS_NOT_SUPPORTED, 0x39), | |
| SCSI_ASC(MEDIUM_NOT_PRESENT, 0x3A), | |
| MEDIUM_NOT_PRESENT_TRAY_CLOSED = 0x3A01, | |
| MEDIUM_NOT_PRESENT_TRAY_OPEN = 0x3A02, | |
| MEDIUM_NOT_PRESENT_LOADABLE = 0x3A03, | |
| MEDIUM_NOT_PRESENT_MEDIUM_AUXILIARY_MEMORY_ACCESSIBLE = 0x3A04, | |
| SCSI_ASC(SEQUENTIAL_POSITIONING_ERROR, 0x3B), | |
| TAPE_POSITION_ERROR_AT_BEGINNING_OF_MEDIUM = 0x3B01, | |
| TAPE_POSITION_ERROR_AT_END_OF_MEDIUM = 0x3B02, | |
| TAPE_OR_ELECTRONIC_VERTICAL_FORMS_UNIT_NOT_READY = 0x3B03, | |
| SLEW_FAILURE = 0x3B04, | |
| PAPER_JAM = 0x3B05, | |
| FAILED_TO_SENSE_TOP_OF_FORM = 0x3B06, | |
| FAILED_TO_SENSE_BOTTOM_OF_FORM = 0x3B07, | |
| REPOSITION_ERROR = 0x3B08, | |
| READ_PAST_END_OF_MEDIUM = 0x3B09, | |
| READ_PAST_BEGINNING_OF_MEDIUM = 0x3B0A, | |
| POSITION_PAST_END_OF_MEDIUM = 0x3B0B, | |
| POSITION_PAST_BEGINNING_OF_MEDIUM = 0x3B0C, | |
| MEDIUM_DESTINATION_ELEMENT_FULL = 0x3B0D, | |
| MEDIUM_SOURCE_ELEMENT_EMPTY = 0x3B0E, | |
| END_OF_MEDIUM_REACHED = 0x3B0F, | |
| MEDIUM_MAGAZINE_NOT_ACCESSIBLE = 0x3B11, | |
| MEDIUM_MAGAZINE_REMOVED = 0x3B12, | |
| MEDIUM_MAGAZINE_INSERTED = 0x3B13, | |
| MEDIUM_MAGAZINE_LOCKED = 0x3B14, | |
| MEDIUM_MAGAZINE_UNLOCKED = 0x3B15, | |
| MECHANICAL_POSITIONING_OR_CHANGER_ERROR = 0x3B16, | |
| READ_PAST_END_OF_USER_OBJECT = 0x3B17, | |
| ELEMENT_DISABLED = 0x3B18, | |
| ELEMENT_ENABLED = 0x3B19, | |
| DATA_TRANSFER_DEVICE_REMOVED = 0x3B1A, | |
| DATA_TRANSFER_DEVICE_INSERTED = 0x3B1B, | |
| TOO_MANY_LOGICAL_OBJECTS_ON_PARTITION_TO_SUPPORT_OP = 0x3B1C, | |
| ELEMENT_STATIC_INFORMATION_CHANGED = 0x3B20, | |
| SCSI_ASC(INVALID_BITS_IN_IDENTIFY_MESSAGE, 0x3D), | |
| SCSI_ASC(LU_HAS_NOT_SELF_CONFIGURED_YET, 0x3E), | |
| LU_FAILURE = 0x3E01, | |
| TIMEOUT_ON_LOGICAL_UNIT = 0x3E02, | |
| LU_FAILED_SELF_TEST = 0x3E03, | |
| LU_UNABLE_TO_UPDATE_SELFTEST_LOG = 0x3E04, | |
| SCSI_ASC(TARGET_OPERATING_CONDITIONS_HAVE_CHANGED, 0x3F), | |
| MICROCODE_HAS_BEEN_CHANGED = 0x3F01, | |
| CHANGED_OPERATING_DEFINITION = 0x3F02, | |
| INQUIRY_DATA_HAS_CHANGED = 0x3F03, | |
| COMPONENT_DEVICE_ATTACHED = 0x3F04, | |
| DEVICE_IDENTIFIER_CHANGED = 0x3F05, | |
| REDUNDANCY_GROUP_CREATED_OR_MODIFIED = 0x3F06, | |
| REDUNDANCY_GROUP_DELETED = 0x3F07, | |
| SPARE_CREATED_OR_MODIFIED = 0x3F08, | |
| SPARE_DELETED = 0x3F09, | |
| VOLUME_SET_CREATED_OR_MODIFIED = 0x3F0A, | |
| VOLUME_SET_DELETED = 0x3F0B, | |
| VOLUME_SET_DEASSIGNED = 0x3F0C, | |
| VOLUME_SET_REASSIGNED = 0x3F0D, | |
| REPORTED_LUNS_DATA_HAS_CHANGED = 0x3F0E, | |
| ECHO_BUFFER_OVERWRITTEN = 0x3F0F, | |
| MEDIUM_LOADABLE = 0x3F10, | |
| MEDIUM_AUXILIARY_MEMORY_ACCESSIBLE = 0x3F11, | |
| iSCSI_IP_ADDRESS_ADDED = 0x3F12, | |
| iSCSI_IP_ADDRESS_REMOVED = 0x3F13, | |
| iSCSI_IP_ADDRESS_CHANGED = 0x3F14, | |
| INSPECT_REFERRALS_SENSE_DESCRIPTORS = 0x3F15, | |
| MICROCODE_HAS_BEEN_CHANGED_WITHOUT_RESET = 0x3F16, | |
| ZONE_TRANSITION_TO_FULL = 0x3F17, | |
| BIND_COMPLETED = 0x3F18, | |
| BIND_REDIRECTED = 0x3F19, | |
| SUBSIDIARY_BINDING_CHANGED = 0x3F1A, | |
| SCSI_ASC(RAM_FAILURE, 0x40), | |
| /* DIAGNOSTIC_FAILURE_ON_COMPONENT_NN = 0x40NN */ | |
| SCSI_ASC(DATA_PATH_FAILURE, 0x41), | |
| SCSI_ASC(POWER_ON_OR_SELFTEST_FAILURE, 0x42), | |
| SCSI_ASC(MESSAGE_ERROR, 0x43), | |
| SCSI_ASC(INTERNAL_TARGET_FAILURE, 0x44), | |
| PERSISTENT_RESERVATION_INFORMATION_LOST = 0x4401, | |
| ATA_DEVICE_FAILED_SET_FEATURES = 0x4471, | |
| SCSI_ASC(SELECT_OR_RESELECT_FAILURE, 0x45), | |
| SCSI_ASC(UNSUCCESSFUL_SOFT_RESET, 0x46), | |
| SCSI_ASC(SCSI_PARITY_ERROR, 0x47), | |
| DATA_PHASE_CRC_ERROR_DETECTED = 0x4701, | |
| SCSI_PARITY_ERROR_DETECTED_DURING_ST_DATA_PHASE = 0x4702, | |
| INFORMATION_UNIT_iuCRC_ERROR_DETECTED = 0x4703, | |
| ASYNCHRONOUS_INFORMATION_PROTECTION_ERROR_DETECTED = 0x4704, | |
| PROTOCOL_SERVICE_CRC_ERROR = 0x4705, | |
| PHY_TEST_FUNCTION_IN_PROGRESS = 0x4706, | |
| SOME_COMMANDS_CLEARED_BY_ISCSI_PROTOCOL_EVENT = 0x477F, | |
| SCSI_ASC(INITIATOR_DETECTED_ERROR_MESSAGE_RECEIVED, 0x48), | |
| SCSI_ASC(INVALID_MESSAGE_ERROR, 0x49), | |
| SCSI_ASC(COMMAND_PHASE_ERROR, 0x4A), | |
| SCSI_ASC(DATA_PHASE_ERROR, 0x4B), | |
| INVALID_TARGET_PORT_TRANSFER_TAG_RECEIVED = 0x4B01, | |
| TOO_MUCH_WRITE_DATA = 0x4B02, | |
| ACK_NAK_TIMEOUT = 0x4B03, | |
| NAK_RECEIVED = 0x4B04, | |
| DATA_OFFSET_ERROR = 0x4B05, | |
| INITIATOR_RESPONSE_TIMEOUT = 0x4B06, | |
| CONNECTION_LOST = 0x4B07, | |
| DATA_IN_BUFFER_OVERFLOW_BUFFER_SIZE = 0x4B08, | |
| DATA_IN_BUFFER_OVERFLOW_BUFFER_DESCRIPTOR_AREA = 0x4B09, | |
| DATA_IN_BUFFER_ERROR = 0x4B0A, | |
| DATA_OUT_BUFFER_OVERFLOW_BUFFER_SIZE = 0x4B0B, | |
| DATA_OUT_BUFFER_OVERFLOW_BUFFER_DESCRIPTOR_AREA = 0x4B0C, | |
| DATA_OUT_BUFFER_ERROR = 0x4B0D, | |
| PCIE_FABRIC_ERROR = 0x4B0E, | |
| PCIE_COMPLETION_TIMEOUT = 0x4B0F, | |
| PCIE_COMPLETER_ABORT = 0x4B10, | |
| PCIE_POISONED_TLP_RECEIVED = 0x4B11, | |
| PCIE_ECRC_CHECK_FAILED = 0x4B12, | |
| PCIE_UNSUPPORTED_REQUEST = 0x4B13, | |
| PCIE_ACS_VIOLATION = 0x4B14, | |
| PCIE_TLP_PREFIX_BLOCKED = 0x4B15, | |
| SCSI_ASC(LU_FAILED_SELF_CONFIGURATION, 0x4C), | |
| SCSI_ASC(TAGGED_OVERLAPPED_COMMANDS, 0x4D), | |
| SCSI_ASC(OVERLAPPED_COMMANDS_ATTEMPTED, 0x4E), | |
| SCSI_ASC(WRITE_APPEND_ERROR, 0x50), | |
| WRITE_APPEND_POSITION_ERROR = 0x5001, | |
| POSITION_ERROR_RELATED_TO_TIMING = 0x5002, | |
| SCSI_ASC(ERASE_FAILURE, 0x51), | |
| ERASE_FAILURE_INCOMPLETE_ERASE_OP_DETECTED = 0x5101, | |
| SCSI_ASC(CARTRIDGE_FAULT, 0x52), | |
| SCSI_ASC(MEDIA_LOAD_OR_EJECT_FAILED, 0x53), | |
| UNLOAD_TAPE_FAILURE = 0x5301, | |
| MEDIUM_REMOVAL_PREVENTED = 0x5302, | |
| MEDIUM_REMOVAL_PREVENTED_BY_DATA_TRANSFER_ELEMENT = 0x5303, | |
| MEDIUM_THREAD_OR_UNTHREAD_FAILURE = 0x5304, | |
| VOLUME_IDENTIFIER_INVALID = 0x5305, | |
| VOLUME_IDENTIFIER_MISSING = 0x5306, | |
| DUPLICATE_VOLUME_IDENTIFIER = 0x5307, | |
| ELEMENT_STATUS_UNKNOWN = 0x5308, | |
| DATA_TRANSFER_DEVICE_ERR_LOAD_FAILED = 0x5309, | |
| DATA_TRANSFER_DEVICE_ERR_UNLOAD_FAILED = 0x530A, | |
| DATA_TRANSFER_DEVICE_ERR_UNLOAD_MISSING = 0x530B, | |
| DATA_TRANSFER_DEVICE_ERR_EJECT_FAILED = 0x530C, | |
| DATA_TRANSFER_DEVICE_ERR_LIBRARY_COMMUNICATION_FAILED = 0x530D, | |
| SCSI_ASC(SCSI_TO_HOST_SYSTEM_INTERFACE_FAILURE, 0x54), | |
| SCSI_ASC(SYSTEM_RESOURCE_FAILURE, 0x55), | |
| SYSTEM_BUFFER_FULL = 0x5501, | |
| INSUFFICIENT_RESERVATION_RESOURCES = 0x5502, | |
| INSUFFICIENT_RESOURCES = 0x5503, | |
| INSUFFICIENT_REGISTRATION_RESOURCES = 0x5504, | |
| INSUFFICIENT_ACCESS_CONTROL_RESOURCES = 0x5505, | |
| AUXILIARY_MEMORY_OUT_OF_SPACE = 0x5506, | |
| QUOTA_ERROR = 0x5507, | |
| MAXIMUM_NUMBER_OF_SUPPLEMENTAL_DECRYPTION_KEYS_EXCEEDED = 0x5508, | |
| MEDIUM_AUXILIARY_MEMORY_NOT_ACCESSIBLE = 0x5509, | |
| DATA_CURRENTLY_UNAVAILABLE = 0x550A, | |
| INSUFFICIENT_POWER_FOR_OPERATION = 0x550B, | |
| INSUFFICIENT_RESOURCES_TO_CREATE_ROD = 0x550C, | |
| INSUFFICIENT_RESOURCES_TO_CREATE_ROD_TOKEN = 0x550D, | |
| INSUFFICIENT_ZONE_RESOURCES = 0x550E, | |
| INSUFFICIENT_ZONE_RESOURCES_TO_COMPLETE_WRITE = 0x550F, | |
| MAXIMUM_NUMBER_OF_STREAMS_OPEN = 0x5510, | |
| INSUFFICIENT_RESOURCES_TO_BIND = 0x5511, | |
| SCSI_ASC(UNABLE_TO_RECOVER_TABLE_OF_CONTENTS, 0x57), | |
| SCSI_ASC(GENERATION_DOES_NOT_EXIST, 0x58), | |
| SCSI_ASC(UPDATED_BLOCK_READ, 0x59), | |
| SCSI_ASC(OPERATOR_REQUEST_OR_STATE_CHANGE_INPUT, 0x5A), | |
| OPERATOR_MEDIUM_REMOVAL_REQUEST = 0x5A01, | |
| OPERATOR_SELECTED_WRITE_PROTECT = 0x5A02, | |
| OPERATOR_SELECTED_WRITE_PERMIT = 0x5A03, | |
| SCSI_ASC(LOG_EXCEPTION, 0x5B), | |
| THRESHOLD_CONDITION_MET = 0x5B01, | |
| LOG_COUNTER_AT_MAXIMUM = 0x5B02, | |
| LOG_LIST_CODES_EXHAUSTED = 0x5B03, | |
| SCSI_ASC(RPL_STATUS_CHANGE, 0x5C), | |
| SPINDLES_SYNCHRONIZED = 0x5C01, | |
| SPINDLES_NOT_SYNCHRONIZED = 0x5C02, | |
| SCSI_ASC(FAILURE_PREDICTION_THRESHOLD_EXCEEDED, 0x5D), | |
| MEDIA_FAILURE_PREDICTION_THRESHOLD_EXCEEDED = 0x5D01, | |
| LU_FAILURE_PREDICTION_THRESHOLD_EXCEEDED = 0x5D02, | |
| SPARE_AREA_EXHAUSTION_PREDICTION_THRESHOLD_EXCEEDED = 0x5D03, | |
| HW_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D10, | |
| HW_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D11, | |
| HW_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D12, | |
| HW_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D13, | |
| HW_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D14, | |
| HW_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D15, | |
| HW_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D16, | |
| HW_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D17, | |
| HW_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D18, | |
| HW_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D19, | |
| HW_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D1A, | |
| HW_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D1B, | |
| HW_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D1C, | |
| HW_IMPENDING_FAILURE_POWER_LOSS_PROTECTION_CIRCUIT = 0x5D1D, | |
| CONTROLLER_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D20, | |
| CONTROLLER_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D21, | |
| CONTROLLER_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D22, | |
| CONTROLLER_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D23, | |
| CONTROLLER_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D24, | |
| CONTROLLER_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D25, | |
| CONTROLLER_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D26, | |
| CONTROLLER_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D27, | |
| CONTROLLER_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D28, | |
| CONTROLLER_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D29, | |
| CONTROLLER_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D2A, | |
| CONTROLLER_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D2B, | |
| CONTROLLER_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D2C, | |
| DATA_CHANNEL_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D30, | |
| DATA_CHANNEL_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D31, | |
| DATA_CHANNEL_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D32, | |
| DATA_CHANNEL_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D33, | |
| DATA_CHANNEL_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D34, | |
| DATA_CHANNEL_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D35, | |
| DATA_CHANNEL_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D36, | |
| DATA_CHANNEL_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D37, | |
| DATA_CHANNEL_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D38, | |
| DATA_CHANNEL_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D39, | |
| DATA_CHANNEL_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D3A, | |
| DATA_CHANNEL_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D3B, | |
| DATA_CHANNEL_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D3C, | |
| SERVO_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D40, | |
| SERVO_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D41, | |
| SERVO_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D42, | |
| SERVO_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D43, | |
| SERVO_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D44, | |
| SERVO_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D45, | |
| SERVO_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D46, | |
| SERVO_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D47, | |
| SERVO_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D48, | |
| SERVO_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D49, | |
| SERVO_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D4A, | |
| SERVO_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D4B, | |
| SERVO_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D4C, | |
| SPINDLE_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D50, | |
| SPINDLE_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D51, | |
| SPINDLE_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D52, | |
| SPINDLE_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D53, | |
| SPINDLE_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D54, | |
| SPINDLE_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D55, | |
| SPINDLE_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D56, | |
| SPINDLE_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D57, | |
| SPINDLE_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D58, | |
| SPINDLE_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D59, | |
| SPINDLE_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D5A, | |
| SPINDLE_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D5B, | |
| SPINDLE_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D5C, | |
| FW_IMPENDING_FAILURE_GENERAL_HARD_DRIVE_FAILURE = 0x5D60, | |
| FW_IMPENDING_FAILURE_DRIVE_ERROR_RATE_TOO_HIGH = 0x5D61, | |
| FW_IMPENDING_FAILURE_DATA_ERROR_RATE_TOO_HIGH = 0x5D62, | |
| FW_IMPENDING_FAILURE_SEEK_ERROR_RATE_TOO_HIGH = 0x5D63, | |
| FW_IMPENDING_FAILURE_TOO_MANY_BLOCK_REASSIGNS = 0x5D64, | |
| FW_IMPENDING_FAILURE_ACCESS_TIMES_TOO_HIGH = 0x5D65, | |
| FW_IMPENDING_FAILURE_START_UNIT_TIMES_TOO_HIGH = 0x5D66, | |
| FW_IMPENDING_FAILURE_CHANNEL_PARAMETRICS = 0x5D67, | |
| FW_IMPENDING_FAILURE_CONTROLLER_DETECTED = 0x5D68, | |
| FW_IMPENDING_FAILURE_THROUGHPUT_PERFORMANCE = 0x5D69, | |
| FW_IMPENDING_FAILURE_SEEK_TIME_PERFORMANCE = 0x5D6A, | |
| FW_IMPENDING_FAILURE_SPINUP_RETRY_COUNT = 0x5D6B, | |
| FW_IMPENDING_FAILURE_DRIVE_CALIBRATION_RETRY_COUNT = 0x5D6C, | |
| MEDIA_IMPENDING_FAILURE_ENDURANCE_LIMIT_MET = 0x5D73, | |
| FAILURE_PREDICTION_THRESHOLD_EXCEEDED_FALSE = 0x5DFF, | |
| SCSI_ASC(LOW_POWER_CONDITION_ON, 0x5E), | |
| IDLE_CONDITION_ACTIVATED_BY_TIMER = 0x5E01, | |
| STANDBY_CONDITION_ACTIVATED_BY_TIMER = 0x5E02, | |
| IDLE_CONDITION_ACTIVATED_BY_COMMAND = 0x5E03, | |
| STANDBY_CONDITION_ACTIVATED_BY_COMMAND = 0x5E04, | |
| IDLE_B_CONDITION_ACTIVATED_BY_TIMER = 0x5E05, | |
| IDLE_B_CONDITION_ACTIVATED_BY_COMMAND = 0x5E06, | |
| IDLE_C_CONDITION_ACTIVATED_BY_TIMER = 0x5E07, | |
| IDLE_C_CONDITION_ACTIVATED_BY_COMMAND = 0x5E08, | |
| STANDBY_Y_CONDITION_ACTIVATED_BY_TIMER = 0x5E09, | |
| STANDBY_Y_CONDITION_ACTIVATED_BY_COMMAND = 0x5E0A, | |
| POWER_STATE_CHANGE_TO_ACTIVE = 0x5E41, | |
| POWER_STATE_CHANGE_TO_IDLE = 0x5E42, | |
| POWER_STATE_CHANGE_TO_STANDBY = 0x5E43, | |
| POWER_STATE_CHANGE_TO_SLEEP = 0x5E45, | |
| POWER_STATE_CHANGE_TO_DEVICE_CONTROL = 0x5E47, | |
| SCSI_ASC(LAMP_FAILURE, 0x60), | |
| SCSI_ASC(VIDEO_ACQUISITION_ERROR, 0x61), | |
| UNABLE_TO_ACQUIRE_VIDEO = 0x6101, | |
| OUT_OF_FOCUS = 0x6102, | |
| SCSI_ASC(SCAN_HEAD_POSITIONING_ERROR, 0x62), | |
| SCSI_ASC(END_OF_USER_AREA_ENCOUNTERED_ON_THIS_TRACK, 0x63), | |
| PACKET_DOES_NOT_FIT_IN_AVAILABLE_SPACE = 0x6301, | |
| SCSI_ASC(ILLEGAL_MODE_FOR_THIS_TRACK, 0x64), | |
| INVALID_PACKET_SIZE = 0x6401, | |
| SCSI_ASC(VOLTAGE_FAULT, 0x65), | |
| SCSI_ASC(AUTOMATIC_DOCUMENT_FEEDER_COVER_UP, 0x66), | |
| AUTOMATIC_DOCUMENT_FEEDER_LIFT_UP = 0x6601, | |
| DOCUMENT_JAM_IN_AUTOMATIC_DOCUMENT_FEEDER = 0x6602, | |
| DOCUMENT_MISS_FEED_AUTOMATIC_IN_DOCUMENT_FEEDER = 0x6603, | |
| SCSI_ASC(CONFIG_FAILURE, 0x67), | |
| CONFIG_OF_INCAPABLE_LOGICAL_UNITS_FAILED = 0x6701, | |
| ADD_LU_FAILED = 0x6702, | |
| MODIFICATION_OF_LU_FAILED = 0x6703, | |
| EXCHANGE_OF_LU_FAILED = 0x6704, | |
| REMOVE_OF_LU_FAILED = 0x6705, | |
| ATTACHMENT_OF_LU_FAILED = 0x6706, | |
| CREATION_OF_LU_FAILED = 0x6707, | |
| ASSIGN_FAILURE_OCCURRED = 0x6708, | |
| MULTIPLY_ASSIGNED_LOGICAL_UNIT = 0x6709, | |
| SET_TARGET_PORT_GROUPS_COMMAND_FAILED = 0x670A, | |
| ATA_DEVICE_FEATURE_NOT_ENABLED = 0x670B, | |
| COMMAND_REJECTED = 0x670C, | |
| EXPLICIT_BIND_NOT_ALLOWED = 0x670D, | |
| FEATURE_NOT_ENABLED = 0x670E, | |
| SCSI_ASC(LU_NOT_CONFIGURED, 0x68), | |
| SUBSIDIARY_LU_NOT_CONFIGURED = 0x6801, | |
| SCSI_ASC(DATA_LOSS_ON_LOGICAL_UNIT, 0x69), | |
| MULTIPLE_LU_FAILURES = 0x6901, | |
| PARITY_DATA_MISMATCH = 0x6902, | |
| SCSI_ASC(INFORMATIONAL_REFER_TO_LOG, 0x6A), | |
| SCSI_ASC(STATE_CHANGE_HAS_OCCURRED, 0x6B), | |
| REDUNDANCY_LEVEL_GOT_BETTER = 0x6B01, | |
| REDUNDANCY_LEVEL_GOT_WORSE = 0x6B02, | |
| SCSI_ASC(REBUILD_FAILURE_OCCURRED, 0x6C), | |
| SCSI_ASC(RECALCULATE_FAILURE_OCCURRED, 0x6D), | |
| SCSI_ASC(COMMAND_TO_LU_FAILED, 0x6E), | |
| SCSI_ASC(COPY_PROTECTION_KEY_EXCHANGE_FAILURE_AUTHENTICATION_FAILURE, 0x6F), | |
| COPY_PROTECTION_KEY_EXCHANGE_FAILURE_KEY_NOT_PRESENT = 0x6F01, | |
| COPY_PROTECTION_KEY_EXCHANGE_FAILURE_KEY_NOT_ESTABLISHED = 0x6F02, | |
| READ_OF_SCRAMBLED_SECTOR_WITHOUT_AUTHENTICATION = 0x6F03, | |
| MEDIA_REGION_CODE_IS_MISMATCHED_TO_LU_REGION = 0x6F04, | |
| DRIVE_REGION_MUST_BE_PERMANENT_REGION_RESET_COUNT_ERROR = 0x6F05, | |
| INSUFFICIENT_BLOCK_COUNT_FOR_BINDING_NONCE_RECORDING = 0x6F06, | |
| CONFLICT_IN_BINDING_NONCE_RECORDING = 0x6F07, | |
| INSUFFICIENT_PERMISSION = 0x6F08, | |
| INVALID_DRIVE_HOST_PAIRING_SERVER = 0x6F09, | |
| DRIVE_HOST_PAIRING_SUSPENDED = 0x6F0A, | |
| SCSI_ASC(DECOMPRESSION_EXCEPTION_SHORT_ALGORITHM_ID, 0x70), | |
| SCSI_ASC(DECOMPRESSION_EXCEPTION_LONG_ALGORITHM_ID, 0x71), | |
| SCSI_ASC(SESSION_FIXATION_ERROR, 0x72), | |
| SESSION_FIXATION_ERROR_WRITING_LEAD_IN = 0x7201, | |
| SESSION_FIXATION_ERROR_WRITING_LEAD_OUT = 0x7202, | |
| SESSION_FIXATION_ERROR_INCOMPLETE_TRACK_IN_SESSION = 0x7203, | |
| EMPTY_OR_PARTIALLY_WRITTEN_RESERVED_TRACK = 0x7204, | |
| NO_MORE_TRACK_RESERVATIONS_ALLOWED = 0x7205, | |
| RMZ_EXTENSION_IS_NOT_ALLOWED = 0x7206, | |
| NO_MORE_TEST_ZONE_EXTENSIONS_ARE_ALLOWED = 0x7207, | |
| SCSI_ASC(CD_CONTROL_ERROR, 0x73), | |
| POWER_CALIBRATION_AREA_ALMOST_FULL = 0x7301, | |
| POWER_CALIBRATION_AREA_IS_FULL = 0x7302, | |
| POWER_CALIBRATION_AREA_ERROR = 0x7303, | |
| PROGRAM_MEMORY_AREA_UPDATE_FAILURE = 0x7304, | |
| PROGRAM_MEMORY_AREA_IS_FULL = 0x7305, | |
| RMA_PMA_IS_ALMOST_FULL = 0x7306, | |
| CURRENT_POWER_CALIBRATION_AREA_ALMOST_FULL = 0x7310, | |
| CURRENT_POWER_CALIBRATION_AREA_IS_FULL = 0x7311, | |
| RDZ_IS_FULL = 0x7317, | |
| SCSI_ASC(SECURITY_ERROR, 0x74), | |
| UNABLE_TO_DECRYPT_DATA = 0x7401, | |
| UNENCRYPTED_DATA_ENCOUNTERED_WHILE_DECRYPTING = 0x7402, | |
| INCORRECT_DATA_ENCRYPTION_KEY = 0x7403, | |
| CRYPTOGRAPHIC_INTEGRITY_VALIDATION_FAILED = 0x7404, | |
| ERROR_DECRYPTING_DATA = 0x7405, | |
| UNKNOWN_SIGNATURE_VERIFICATION_KEY = 0x7406, | |
| ENCRYPTION_PARAMS_NOT_USEABLE = 0x7407, | |
| DIGITAL_SIGNATURE_VALIDATION_FAILURE = 0x7408, | |
| ENCRYPTION_MODE_MISMATCH_ON_READ = 0x7409, | |
| ENCRYPTED_BLOCK_NOT_RAW_READ_ENABLED = 0x740A, | |
| INCORRECT_ENCRYPTION_PARAMS = 0x740B, | |
| UNABLE_TO_DECRYPT_PARAMETER_LIST = 0x740C, | |
| ENCRYPTION_ALGORITHM_DISABLED = 0x740D, | |
| SA_CREATION_PARAMETER_VALUE_INVALID = 0x7410, | |
| SA_CREATION_PARAMETER_VALUE_REJECTED = 0x7411, | |
| INVALID_SA_USAGE = 0x7412, | |
| DATA_ENCRYPTION_CONFIG_PREVENTED = 0x7421, | |
| SA_CREATION_PARAMETER_NOT_SUPPORTED = 0x7430, | |
| AUTHENTICATION_FAILED = 0x7440, | |
| EXTERNAL_DATA_ENCRYPTION_KEY_MANAGER_ACCESS_ERROR = 0x7461, | |
| EXTERNAL_DATA_ENCRYPTION_KEY_MANAGER_ERROR = 0x7462, | |
| EXTERNAL_DATA_ENCRYPTION_KEY_NOT_FOUND = 0x7463, | |
| EXTERNAL_DATA_ENCRYPTION_REQUEST_NOT_AUTHORIZED = 0x7464, | |
| EXTERNAL_DATA_ENCRYPTION_CONTROL_TIMEOUT = 0x746E, | |
| EXTERNAL_DATA_ENCRYPTION_CONTROL_ERROR = 0x746F, | |
| LU_ACCESS_NOT_AUTHORIZED = 0x7471, | |
| SECURITY_CONFLICT_IN_TRANSLATED_DEVICE = 0x7479, | |
| }; | |
| #undef SCSI_ASC_DEF | |
| #undef SCSI_ASC | |
| /* | |
| * Use this to build non-standard sense codes. | |
| * Note: this is defined as a macro instead of an inline function so that it can | |
| * be used to define SCSI failures array variables (see struct scsi_failure). | |
| */ | |
| #define scsi_sense_code(asc, ascq) \ | |
| ((((asc) & 0xff) << 8) | ((ascq) & 0xff)) | |
| static inline u8 scsi_sense_code_asc(u16 code) | |
| { | |
| return (code >> 8) & 0xff; | |
| } | |
| static inline u8 scsi_sense_code_ascq(u16 code) | |
| { | |
| return code & 0xff; | |
| } | |
| #endif /* _SCSI_SENSE_H_ */ |