| /* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) |
| * |
| * A driver for Hermes or Prism 2 chipset based PCMCIA wireless |
| * adaptors, with Lucent/Agere, Intersil or Symbol firmware. |
| * |
| * Current maintainers (as of 29 September 2003) are: |
| * Pavel Roskin <proski AT gnu.org> |
| * and David Gibson <hermes AT gibson.dropbear.id.au> |
| * |
| * (C) Copyright David Gibson, IBM Corporation 2001-2003. |
| * Copyright (C) 2000 David Gibson, Linuxcare Australia. |
| * With some help from : |
| * Copyright (C) 2001 Jean Tourrilhes, HP Labs |
| * Copyright (C) 2001 Benjamin Herrenschmidt |
| * |
| * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 |
| * |
| * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy |
| * AT fasta.fh-dortmund.de> |
| * http://www.stud.fh-dortmund.de/~andy/wvlan/ |
| * |
| * The contents of this file are subject to the Mozilla Public License |
| * Version 1.1 (the "License"); you may not use this file except in |
| * compliance with the License. You may obtain a copy of the License |
| * at http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" |
| * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See |
| * the License for the specific language governing rights and |
| * limitations under the License. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds AT users.sourceforge.net>. Portions created by David |
| * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights |
| * Reserved. |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU General Public License version 2 (the "GPL"), in |
| * which case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use your |
| * version of this file under the MPL, indicate your decision by |
| * deleting the provisions above and replace them with the notice and |
| * other provisions required by the GPL. If you do not delete the |
| * provisions above, a recipient may use your version of this file |
| * under either the MPL or the GPL. */ |
| |
| /* |
| * v0.01 -> v0.02 - 21/3/2001 - Jean II |
| * o Allow to use regular ethX device name instead of dldwdX |
| * o Warning on IBSS with ESSID=any for firmware 6.06 |
| * o Put proper range.throughput values (optimistic) |
| * o IWSPY support (IOCTL and stat gather in Rx path) |
| * o Allow setting frequency in Ad-Hoc mode |
| * o Disable WEP setting if !has_wep to work on old firmware |
| * o Fix txpower range |
| * o Start adding support for Samsung/Compaq firmware |
| * |
| * v0.02 -> v0.03 - 23/3/2001 - Jean II |
| * o Start adding Symbol support - need to check all that |
| * o Fix Prism2/Symbol WEP to accept 128 bits keys |
| * o Add Symbol WEP (add authentication type) |
| * o Add Prism2/Symbol rate |
| * o Add PM timeout (holdover duration) |
| * o Enable "iwconfig eth0 key off" and friends (toggle flags) |
| * o Enable "iwconfig eth0 power unicast/all" (toggle flags) |
| * o Try with an Intel card. It report firmware 1.01, behave like |
| * an antiquated firmware, however on windows it says 2.00. Yuck ! |
| * o Workaround firmware bug in allocate buffer (Intel 1.01) |
| * o Finish external renaming to orinoco... |
| * o Testing with various Wavelan firmwares |
| * |
| * v0.03 -> v0.04 - 30/3/2001 - Jean II |
| * o Update to Wireless 11 -> add retry limit/lifetime support |
| * o Tested with a D-Link DWL 650 card, fill in firmware support |
| * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot) |
| * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-( |
| * It works on D-Link *only* after a tcpdump. Weird... |
| * And still doesn't work on Intel card. Grrrr... |
| * o Update the mode after a setport3 |
| * o Add preamble setting for Symbol cards (not yet enabled) |
| * o Don't complain as much about Symbol cards... |
| * |
| * v0.04 -> v0.04b - 22/4/2001 - David Gibson |
| * o Removed the 'eth' parameter - always use ethXX as the |
| * interface name instead of dldwdXX. The other was racy |
| * anyway. |
| * o Clean up RID definitions in hermes.h, other cleanups |
| * |
| * v0.04b -> v0.04c - 24/4/2001 - Jean II |
| * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card |
| * with vendor 02 and firmware 0.08. Added in the capabilities... |
| * o Tested Lucent firmware 7.28, everything works... |
| * |
| * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt |
| * o Spin-off Pcmcia code. This file is renamed orinoco.c, |
| * and orinoco_cs.c now contains only the Pcmcia specific stuff |
| * o Add Airport driver support on top of orinoco.c (see airport.c) |
| * |
| * v0.05 -> v0.05a - 4/5/2001 - Jean II |
| * o Revert to old Pcmcia code to fix breakage of Ben's changes... |
| * |
| * v0.05a -> v0.05b - 4/5/2001 - Jean II |
| * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V |
| * o D-Link firmware doesn't support multicast. We just print a few |
| * error messages, but otherwise everything works... |
| * o For David : set/getport3 works fine, just upgrade iwpriv... |
| * |
| * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt |
| * o Adapt airport.c to latest changes in orinoco.c |
| * o Remove deferred power enabling code |
| * |
| * v0.05c -> v0.05d - 5/5/2001 - Jean II |
| * o Workaround to SNAP decapsulate frame from Linksys AP |
| * original patch from : Dong Liu <dliu AT research.bell-labs.com> |
| * (note : the memcmp bug was mine - fixed) |
| * o Remove set_retry stuff, no firmware support it (bloat--). |
| * |
| * v0.05d -> v0.06 - 25/5/2001 - Jean II |
| * Original patch from "Hong Lin" <alin AT redhat.com>, |
| * "Ian Kinner" <ikinner AT redhat.com> |
| * and "David Smith" <dsmith AT redhat.com> |
| * o Init of priv->tx_rate_ctrl in firmware specific section. |
| * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh ! |
| * o Spectrum card always need cor_reset (for every reset) |
| * o Fix cor_reset to not lose bit 7 in the register |
| * o flush_stale_links to remove zombie Pcmcia instances |
| * o Ack previous hermes event before reset |
| * Me (with my little hands) |
| * o Allow orinoco.c to call cor_reset via priv->card_reset_handler |
| * o Add priv->need_card_reset to toggle this feature |
| * o Fix various buglets when setting WEP in Symbol firmware |
| * Now, encryption is fully functional on Symbol cards. Youpi ! |
| * |
| * v0.06 -> v0.06b - 25/5/2001 - Jean II |
| * o IBSS on Symbol use port_mode = 4. Please don't ask... |
| * |
| * v0.06b -> v0.06c - 29/5/2001 - Jean II |
| * o Show first spy address in /proc/net/wireless for IBSS mode as well |
| * |
| * v0.06c -> v0.06d - 6/7/2001 - David Gibson |
| * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus' |
| * wishes to reduce the number of unnecessary messages. |
| * o Removed bogus message on CRC error. |
| * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn |
| * <willwaghorn AT yahoo.co.uk> |
| * o Slight cleanup/re-arrangement of firmware detection code. |
| * |
| * v0.06d -> v0.06e - 1/8/2001 - David Gibson |
| * o Removed some redundant global initializers (orinoco_cs.c). |
| * o Added some module metadata |
| * |
| * v0.06e -> v0.06f - 14/8/2001 - David Gibson |
| * o Wording fix to license |
| * o Added a 'use_alternate_encaps' module parameter for APs which need an |
| * oui of 00:00:00. We really need a better way of handling this, but |
| * the module flag is better than nothing for now. |
| * |
| * v0.06f -> v0.07 - 20/8/2001 - David Gibson |
| * o Removed BAP error retries from hermes_bap_seek(). For Tx we now |
| * let the upper layers handle the retry, we retry explicitly in the |
| * Rx path, but don't make as much noise about it. |
| * o Firmware detection cleanups. |
| * |
| * v0.07 -> v0.07a - 1/10/3001 - Jean II |
| * o Add code to read Symbol firmware revision, inspired by latest code |
| * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee ! |
| * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me |
| * a 3Com card with a recent firmware, fill out Symbol firmware |
| * capabilities of latest rev (2.20), as well as older Symbol cards. |
| * o Disable Power Management in newer Symbol firmware, the API |
| * has changed (documentation needed). |
| * |
| * v0.07a -> v0.08 - 3/10/2001 - David Gibson |
| * o Fixed a possible buffer overrun found by the Stanford checker (in |
| * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not |
| * a big problem. |
| * o Turned has_big_wep on for Intersil cards. That's not true for all of |
| * them but we should at least let the capable ones try. |
| * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I |
| * realized that my assumption that the driver's serialization |
| * would prevent the BAP being busy on entry was possibly false, because |
| * things other than seeks may make the BAP busy. |
| * o Use "alternate" (oui 00:00:00) encapsulation by default. |
| * Setting use_old_encaps will mimic the old behaviour, but I think we |
| * will be able to eliminate this. |
| * o Don't try to make __initdata const (the version string). This can't |
| * work because of the way the __initdata sectioning works. |
| * o Added MODULE_LICENSE tags. |
| * o Support for PLX (transparent PCMCIA->PCI bridge) cards. |
| * o Changed to using the new type-fascist min/max. |
| * |
| * v0.08 -> v0.08a - 9/10/2001 - David Gibson |
| * o Inserted some missing acknowledgements/info into the Changelog. |
| * o Fixed some bugs in the normalization of signal level reporting. |
| * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware, |
| * which led to an instant crash on big-endian machines. |
| * |
| * v0.08a -> v0.08b - 20/11/2001 - David Gibson |
| * o Lots of cleanup and bugfixes in orinoco_plx.c |
| * o Cleanup to handling of Tx rate setting. |
| * o Removed support for old encapsulation method. |
| * o Removed old "dldwd" names. |
| * o Split RID constants into a new file hermes_rid.h |
| * o Renamed RID constants to match linux-wlan-ng and prism2.o |
| * o Bugfixes in hermes.c |
| * o Poke the PLX's INTCSR register, so it actually starts |
| * generating interrupts. These cards might actually work now. |
| * o Update to wireless extensions v12 (Jean II) |
| * o Support for tallies and inquire command (Jean II) |
| * o Airport updates for newer PPC kernels (BenH) |
| * |
| * v0.08b -> v0.09 - 21/12/2001 - David Gibson |
| * o Some new PCI IDs for PLX cards. |
| * o Removed broken attempt to do ALLMULTI reception. Just use |
| * promiscuous mode instead |
| * o Preliminary work for list-AP (Jean II) |
| * o Airport updates from (BenH) |
| * o Eliminated racy hw_ready stuff |
| * o Fixed generation of fake events in irq handler. This should |
| * finally kill the EIO problems (Jean II & dgibson) |
| * o Fixed breakage of bitrate set/get on Agere firmware (Jean II) |
| * |
| * v0.09 -> v0.09a - 2/1/2002 - David Gibson |
| * o Fixed stupid mistake in multicast list handling, triggering |
| * a BUG() |
| * |
| * v0.09a -> v0.09b - 16/1/2002 - David Gibson |
| * o Fixed even stupider mistake in new interrupt handling, which |
| * seriously broke things on big-endian machines. |
| * o Removed a bunch of redundant includes and exports. |
| * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c |
| * o Don't attempt to do hardware level multicast reception on |
| * Intersil firmware, just go promisc instead. |
| * o Typo fixed in hermes_issue_cmd() |
| * o Eliminated WIRELESS_SPY #ifdefs |
| * o Status code reported on Tx exceptions |
| * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC |
| * interrupts, which should fix the timeouts we're seeing. |
| * |
| * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson |
| * o Removed nested structures used for header parsing, so the |
| * driver should now work without hackery on ARM |
| * o Fix for WEP handling on Intersil (Hawk Newton) |
| * o Eliminated the /proc/hermes/ethXX/regs debugging file. It |
| * was never very useful. |
| * o Make Rx errors less noisy. |
| * |
| * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson |
| * o Laid the groundwork in hermes.[ch] for devices which map |
| * into PCI memory space rather than IO space. |
| * o Fixed bug in multicast handling (cleared multicast list when |
| * leaving promiscuous mode). |
| * o Relegated Tx error messages to debug. |
| * o Cleaned up / corrected handling of allocation lengths. |
| * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc). |
| * o Change to using alloc_etherdev() for structure allocations. |
| * o Check for and drop undersized packets. |
| * o Fixed a race in stopping/waking the queue. This should fix |
| * the timeout problems (Pavel Roskin) |
| * o Reverted to netif_wake_queue() on the ALLOC event. |
| * o Fixes for recent Symbol firmwares which lack AP density |
| * (Pavel Roskin). |
| * |
| * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson |
| * o Handle different register spacing, necessary for Prism 2.5 |
| * PCI adaptors (Steve Hill). |
| * o Cleaned up initialization of card structures in orinoco_cs |
| * and airport. Removed card->priv field. |
| * o Make response structure optional for hermes_docmd_wait() |
| * Pavel Roskin) |
| * o Added PCI id for Nortel emobility to orinoco_plx.c. |
| * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin) |
| * o Cleanups to firmware capability detection. |
| * o Arrange for orinoco_pci.c to override firmware detection. |
| * We should be able to support the PCI Intersil cards now. |
| * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin). |
| * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni |
| * Malinen). |
| * o Makefile changes for better integration into David Hinds |
| * pcmcia-cs package. |
| * |
| * v0.11a -> v0.11b - 1 May 2002 - David Gibson |
| * o Better error reporting in orinoco_plx_init_one() |
| * o Fixed multiple bad kfree() bugs introduced by the |
| * alloc_orinocodev() changes. |
| * |
| * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson |
| * o Support changing the MAC address. |
| * o Correct display of Intersil firmware revision numbers. |
| * o Entirely revised locking scheme. Should be both simpler and |
| * better. |
| * o Merged some common code in orinoco_plx, orinoco_pci and |
| * airport by creating orinoco_default_{open,stop,reset}() |
| * which are used as the dev->open, dev->stop, priv->reset |
| * callbacks if none are specified when alloc_orinocodev() is |
| * called. |
| * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt(). |
| * They didn't do anything. |
| * |
| * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson |
| * o Some rearrangement of code. |
| * o Numerous fixups to locking and rest handling, particularly |
| * for PCMCIA. |
| * o This allows open and stop net_device methods to be in |
| * orinoco.c now, rather than in the init modules. |
| * o In orinoco_cs.c link->priv now points to the struct |
| * net_device not to the struct orinoco_private. |
| * o Added a check for undersized SNAP frames, which could cause |
| * crashes. |
| * |
| * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson |
| * o Fix hw->num_init testing code, so num_init is actually |
| * incremented. |
| * o Fix very stupid bug in orinoco_cs which broke compile with |
| * CONFIG_SMP. |
| * o Squashed a warning. |
| * |
| * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson |
| * o Change to C9X style designated initializers. |
| * o Add support for 3Com AirConnect PCI. |
| * o No longer ignore the hard_reset argument to |
| * alloc_orinocodev(). Oops. |
| * |
| * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson |
| * o Revert the broken 0.12* locking scheme and go to a new yet |
| * simpler scheme. |
| * o Do firmware resets only in orinoco_init() and when waking |
| * the card from hard sleep. |
| * |
| * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson |
| * o Re-introduced full resets (via schedule_task()) on Tx |
| * timeout. |
| * |
| * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson |
| * o Minor cleanups to info frame handling. Add basic support |
| * for linkstatus info frames. |
| * o Include required kernel headers in orinoco.h, to avoid |
| * compile problems. |
| * |
| * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson |
| * o Implemented hard reset for Airport cards |
| * o Experimental suspend/resume implementation for orinoco_pci |
| * o Abolished /proc debugging support, replaced with a debugging |
| * iwpriv. Now it's ugly and simple instead of ugly and complex. |
| * o Bugfix in hermes.c if the firmware returned a record length |
| * of 0, we could go clobbering memory. |
| * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable |
| * was set, which was usually true on PCMCIA hot removes. |
| * o Track LINKSTATUS messages, silently drop Tx packets before |
| * we are connected (avoids confusing the firmware), and only |
| * give LINKSTATUS printk()s if the status has changed. |
| * |
| * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson |
| * o Cleanup: use dev instead of priv in various places. |
| * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event |
| * if we're in the middle of a (driver initiated) hard reset. |
| * o Bug fix: ETH_ZLEN is supposed to include the header |
| * (Dionysus Blazakis & Manish Karir) |
| * o Convert to using workqueues instead of taskqueues (and |
| * backwards compatibility macros for pre 2.5.41 kernels). |
| * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in |
| * airport.c |
| * o New orinoco_tmd.c init module from Joerg Dorchain for |
| * TMD7160 based PCI to PCMCIA bridges (similar to |
| * orinoco_plx.c). |
| * |
| * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson |
| * o Make hw_unavailable a counter, rather than just a flag, this |
| * is necessary to avoid some races (such as a card being |
| * removed in the middle of orinoco_reset(). |
| * o Restore Release/RequestConfiguration in the PCMCIA event handler |
| * when dealing with a driver initiated hard reset. This is |
| * necessary to prevent hangs due to a spurious interrupt while |
| * the reset is in progress. |
| * o Clear the 802.11 header when transmitting, even though we |
| * don't use it. This fixes a long standing bug on some |
| * firmwares, which seem to get confused if that isn't done. |
| * o Be less eager to de-encapsulate SNAP frames, only do so if |
| * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old |
| * behaviour broke CDP (Cisco Discovery Protocol). |
| * o Use dev instead of priv for free_irq() as well as |
| * request_irq() (oops). |
| * o Attempt to reset rather than giving up if we get too many |
| * IRQs. |
| * o Changed semantics of __orinoco_down() so it can be called |
| * safely with hw_unavailable set. It also now clears the |
| * linkstatus (since we're going to have to reassociate). |
| * |
| * v0.13d -> v0.13e - 12 May 2003 - David Gibson |
| * o Support for post-2.5.68 return values from irq handler. |
| * o Fixed bug where underlength packets would be double counted |
| * in the rx_dropped statistics. |
| * o Provided a module parameter to suppress linkstatus messages. |
| * |
| * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson |
| * o Replaced priv->connected logic with netif_carrier_on/off() |
| * calls. |
| * o Remove has_ibss_any and never set the CREATEIBSS RID when |
| * the ESSID is empty. Too many firmwares break if we do. |
| * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove |
| * __devinitdata from PCI ID tables, use free_netdev(). |
| * o Enabled shared-key authentication for Agere firmware (from |
| * Robert J. Moore <Robert.J.Moore AT allanbank.com> |
| * o Move netif_wake_queue() (back) to the Tx completion from the |
| * ALLOC event. This seems to prevent/mitigate the rolling |
| * error -110 problems at least on some Intersil firmwares. |
| * Theoretically reduces performance, but I can't measure it. |
| * Patch from Andrew Tridgell <tridge AT samba.org> |
| * |
| * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson |
| * o Correctly turn off shared-key authentication when requested |
| * (bugfix from Robert J. Moore). |
| * o Correct airport sleep interfaces for current 2.6 kernels. |
| * o Add code for key change without disabling/enabling the MAC |
| * port. This is supposed to allow 802.1x to work sanely, but |
| * doesn't seem to yet. |
| * |
| * TODO |
| * o New wireless extensions API (patch from Moustafa |
| * Youssef, updated by Jim Carter and Pavel Roskin). |
| * o Handle de-encapsulation within network layer, provide 802.11 |
| * headers (patch from Thomas 'Dent' Mirlacher) |
| * o RF monitor mode support |
| * o Fix possible races in SPY handling. |
| * o Disconnect wireless extensions from fundamental configuration. |
| * o (maybe) Software WEP support (patch from Stano Meduna). |
| * o (maybe) Use multiple Tx buffers - driver handling queue |
| * rather than firmware. |
| */ |
| |
| /* Locking and synchronization: |
| * |
| * The basic principle is that everything is serialized through a |
| * single spinlock, priv->lock. The lock is used in user, bh and irq |
| * context, so when taken outside hardirq context it should always be |
| * taken with interrupts disabled. The lock protects both the |
| * hardware and the struct orinoco_private. |
| * |
| * Another flag, priv->hw_unavailable indicates that the hardware is |
| * unavailable for an extended period of time (e.g. suspended, or in |
| * the middle of a hard reset). This flag is protected by the |
| * spinlock. All code which touches the hardware should check the |
| * flag after taking the lock, and if it is set, give up on whatever |
| * they are doing and drop the lock again. The orinoco_lock() |
| * function handles this (it unlocks and returns -EBUSY if |
| * hw_unavailable is non-zero). |
| */ |
| |
| #define DRIVER_NAME "orinoco" |
| |
| #include <linux/config.h> |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/wireless.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #include "hermes.h" |
| #include "hermes_rid.h" |
| #include "orinoco.h" |
| #include "ieee802_11.h" |
| |
| /********************************************************************/ |
| /* Module information */ |
| /********************************************************************/ |
| |
| MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); |
| MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| /* Level of debugging. Used in the macros in orinoco.h */ |
| #ifdef ORINOCO_DEBUG |
| int orinoco_debug = ORINOCO_DEBUG; |
| module_param(orinoco_debug, int, 0644); |
| MODULE_PARM_DESC(orinoco_debug, "Debug level"); |
| EXPORT_SYMBOL(orinoco_debug); |
| #endif |
| |
| static int suppress_linkstatus; /* = 0 */ |
| module_param(suppress_linkstatus, bool, 0644); |
| MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); |
| |
| /********************************************************************/ |
| /* Compile time configuration and compatibility stuff */ |
| /********************************************************************/ |
| |
| /* We do this this way to avoid ifdefs in the actual code */ |
| #ifdef WIRELESS_SPY |
| #define SPY_NUMBER(priv) (priv->spy_number) |
| #else |
| #define SPY_NUMBER(priv) 0 |
| #endif /* WIRELESS_SPY */ |
| |
| /********************************************************************/ |
| /* Internal constants */ |
| /********************************************************************/ |
| |
| #define ORINOCO_MIN_MTU 256 |
| #define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) |
| |
| #define SYMBOL_MAX_VER_LEN (14) |
| #define USER_BAP 0 |
| #define IRQ_BAP 1 |
| #define MAX_IRQLOOPS_PER_IRQ 10 |
| #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of |
| * how many events the |
| * device could |
| * legitimately generate */ |
| #define SMALL_KEY_SIZE 5 |
| #define LARGE_KEY_SIZE 13 |
| #define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ |
| |
| #define DUMMY_FID 0xFFFF |
| |
| /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ |
| HERMES_MAX_MULTICAST : 0)*/ |
| #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) |
| |
| #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ |
| | HERMES_EV_TX | HERMES_EV_TXEXC \ |
| | HERMES_EV_WTERR | HERMES_EV_INFO \ |
| | HERMES_EV_INFDROP ) |
| |
| /********************************************************************/ |
| /* Data tables */ |
| /********************************************************************/ |
| |
| /* The frequency of each channel in MHz */ |
| static const long channel_frequency[] = { |
| 2412, 2417, 2422, 2427, 2432, 2437, 2442, |
| 2447, 2452, 2457, 2462, 2467, 2472, 2484 |
| }; |
| #define NUM_CHANNELS ARRAY_SIZE(channel_frequency) |
| |
| /* This tables gives the actual meanings of the bitrate IDs returned |
| * by the firmware. */ |
| static struct { |
| int bitrate; /* in 100s of kilobits */ |
| int automatic; |
| u16 agere_txratectrl; |
| u16 intersil_txratectrl; |
| } bitrate_table[] = { |
| {110, 1, 3, 15}, /* Entry 0 is the default */ |
| {10, 0, 1, 1}, |
| {10, 1, 1, 1}, |
| {20, 0, 2, 2}, |
| {20, 1, 6, 3}, |
| {55, 0, 4, 4}, |
| {55, 1, 7, 7}, |
| {110, 0, 5, 8}, |
| }; |
| #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) |
| |
| /********************************************************************/ |
| /* Data types */ |
| /********************************************************************/ |
| |
| struct header_struct { |
| /* 802.3 */ |
| u8 dest[ETH_ALEN]; |
| u8 src[ETH_ALEN]; |
| u16 len; |
| /* 802.2 */ |
| u8 dsap; |
| u8 ssap; |
| u8 ctrl; |
| /* SNAP */ |
| u8 oui[3]; |
| u16 ethertype; |
| } __attribute__ ((packed)); |
| |
| /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ |
| u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; |
| |
| #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) |
| |
| struct hermes_rx_descriptor { |
| u16 status; |
| u32 time; |
| u8 silence; |
| u8 signal; |
| u8 rate; |
| u8 rxflow; |
| u32 reserved; |
| } __attribute__ ((packed)); |
| |
| /********************************************************************/ |
| /* Function prototypes */ |
| /********************************************************************/ |
| |
| static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| static int __orinoco_program_rids(struct net_device *dev); |
| static void __orinoco_set_multicast_list(struct net_device *dev); |
| static int orinoco_debug_dump_recs(struct net_device *dev); |
| |
| /********************************************************************/ |
| /* Internal helper functions */ |
| /********************************************************************/ |
| |
| static inline void set_port_type(struct orinoco_private *priv) |
| { |
| switch (priv->iw_mode) { |
| case IW_MODE_INFRA: |
| priv->port_type = 1; |
| priv->createibss = 0; |
| break; |
| case IW_MODE_ADHOC: |
| if (priv->prefer_port3) { |
| priv->port_type = 3; |
| priv->createibss = 0; |
| } else { |
| priv->port_type = priv->ibss_port; |
| priv->createibss = 1; |
| } |
| break; |
| default: |
| printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", |
| priv->ndev->name); |
| } |
| } |
| |
| /********************************************************************/ |
| /* Device methods */ |
| /********************************************************************/ |
| |
| static int orinoco_open(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int err; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = __orinoco_up(dev); |
| |
| if (! err) |
| priv->open = 1; |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| int orinoco_stop(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| |
| /* We mustn't use orinoco_lock() here, because we need to be |
| able to close the interface even if hw_unavailable is set |
| (e.g. as we're released after a PC Card removal) */ |
| spin_lock_irq(&priv->lock); |
| |
| priv->open = 0; |
| |
| err = __orinoco_down(dev); |
| |
| spin_unlock_irq(&priv->lock); |
| |
| return err; |
| } |
| |
| static struct net_device_stats *orinoco_get_stats(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| return &priv->stats; |
| } |
| |
| static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| struct iw_statistics *wstats = &priv->wstats; |
| int err = 0; |
| unsigned long flags; |
| |
| if (! netif_device_present(dev)) { |
| printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", |
| dev->name); |
| return NULL; /* FIXME: Can we do better than this? */ |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return NULL; /* FIXME: Erg, we've been signalled, how |
| * do we propagate this back up? */ |
| |
| if (priv->iw_mode == IW_MODE_ADHOC) { |
| memset(&wstats->qual, 0, sizeof(wstats->qual)); |
| /* If a spy address is defined, we report stats of the |
| * first spy address - Jean II */ |
| if (SPY_NUMBER(priv)) { |
| wstats->qual.qual = priv->spy_stat[0].qual; |
| wstats->qual.level = priv->spy_stat[0].level; |
| wstats->qual.noise = priv->spy_stat[0].noise; |
| wstats->qual.updated = priv->spy_stat[0].updated; |
| } |
| } else { |
| struct { |
| u16 qual, signal, noise; |
| } __attribute__ ((packed)) cq; |
| |
| err = HERMES_READ_RECORD(hw, USER_BAP, |
| HERMES_RID_COMMSQUALITY, &cq); |
| |
| wstats->qual.qual = (int)le16_to_cpu(cq.qual); |
| wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; |
| wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; |
| wstats->qual.updated = 7; |
| } |
| |
| /* We can't really wait for the tallies inquiry command to |
| * complete, so we just use the previous results and trigger |
| * a new tallies inquiry command for next time - Jean II */ |
| /* FIXME: We're in user context (I think?), so we should just |
| wait for the tallies to come through */ |
| err = hermes_inquire(hw, HERMES_INQ_TALLIES); |
| |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return NULL; |
| |
| return wstats; |
| } |
| |
| static void orinoco_set_multicast_list(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " |
| "called when hw_unavailable\n", dev->name); |
| return; |
| } |
| |
| __orinoco_set_multicast_list(dev); |
| orinoco_unlock(priv, &flags); |
| } |
| |
| static int orinoco_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) |
| return -EINVAL; |
| |
| if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) > |
| (priv->nicbuf_size - ETH_HLEN) ) |
| return -EINVAL; |
| |
| dev->mtu = new_mtu; |
| |
| return 0; |
| } |
| |
| /********************************************************************/ |
| /* Tx path */ |
| /********************************************************************/ |
| |
| static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 txfid = priv->txfid; |
| char *p; |
| struct ethhdr *eh; |
| int len, data_len, data_off; |
| struct hermes_tx_descriptor desc; |
| unsigned long flags; |
| |
| TRACE_ENTER(dev->name); |
| |
| if (! netif_running(dev)) { |
| printk(KERN_ERR "%s: Tx on stopped device!\n", |
| dev->name); |
| TRACE_EXIT(dev->name); |
| return 1; |
| } |
| |
| if (netif_queue_stopped(dev)) { |
| printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", |
| dev->name); |
| TRACE_EXIT(dev->name); |
| return 1; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", |
| dev->name); |
| TRACE_EXIT(dev->name); |
| return 1; |
| } |
| |
| if (! netif_carrier_ok(dev)) { |
| /* Oops, the firmware hasn't established a connection, |
| silently drop the packet (this seems to be the |
| safest approach). */ |
| stats->tx_errors++; |
| orinoco_unlock(priv, &flags); |
| dev_kfree_skb(skb); |
| TRACE_EXIT(dev->name); |
| return 0; |
| } |
| |
| /* Length of the packet body */ |
| /* FIXME: what if the skb is smaller than this? */ |
| len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); |
| |
| eh = (struct ethhdr *)skb->data; |
| |
| memset(&desc, 0, sizeof(desc)); |
| desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); |
| err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); |
| if (err) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "%s: Error %d writing Tx descriptor " |
| "to BAP\n", dev->name, err); |
| stats->tx_errors++; |
| goto fail; |
| } |
| |
| /* Clear the 802.11 header and data length fields - some |
| * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused |
| * if this isn't done. */ |
| hermes_clear_words(hw, HERMES_DATA0, |
| HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); |
| |
| /* Encapsulate Ethernet-II frames */ |
| if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ |
| struct header_struct hdr; |
| data_len = len; |
| data_off = HERMES_802_3_OFFSET + sizeof(hdr); |
| p = skb->data + ETH_HLEN; |
| |
| /* 802.3 header */ |
| memcpy(hdr.dest, eh->h_dest, ETH_ALEN); |
| memcpy(hdr.src, eh->h_source, ETH_ALEN); |
| hdr.len = htons(data_len + ENCAPS_OVERHEAD); |
| |
| /* 802.2 header */ |
| memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr)); |
| |
| hdr.ethertype = eh->h_proto; |
| err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), |
| txfid, HERMES_802_3_OFFSET); |
| if (err) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "%s: Error %d writing packet " |
| "header to BAP\n", dev->name, err); |
| stats->tx_errors++; |
| goto fail; |
| } |
| } else { /* IEEE 802.3 frame */ |
| data_len = len + ETH_HLEN; |
| data_off = HERMES_802_3_OFFSET; |
| p = skb->data; |
| } |
| |
| /* Round up for odd length packets */ |
| err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), |
| txfid, data_off); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d writing packet to BAP\n", |
| dev->name, err); |
| stats->tx_errors++; |
| goto fail; |
| } |
| |
| /* Finally, we actually initiate the send */ |
| netif_stop_queue(dev); |
| |
| err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, |
| txfid, NULL); |
| if (err) { |
| netif_start_queue(dev); |
| printk(KERN_ERR "%s: Error %d transmitting packet\n", |
| dev->name, err); |
| stats->tx_errors++; |
| goto fail; |
| } |
| |
| dev->trans_start = jiffies; |
| stats->tx_bytes += data_off + data_len; |
| |
| orinoco_unlock(priv, &flags); |
| |
| dev_kfree_skb(skb); |
| |
| TRACE_EXIT(dev->name); |
| |
| return 0; |
| fail: |
| TRACE_EXIT(dev->name); |
| |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| u16 fid = hermes_read_regn(hw, ALLOCFID); |
| |
| if (fid != priv->txfid) { |
| if (fid != DUMMY_FID) |
| printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", |
| dev->name, fid); |
| return; |
| } |
| |
| hermes_write_regn(hw, ALLOCFID, DUMMY_FID); |
| } |
| |
| static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| |
| stats->tx_packets++; |
| |
| netif_wake_queue(dev); |
| |
| hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); |
| } |
| |
| static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| u16 fid = hermes_read_regn(hw, TXCOMPLFID); |
| struct hermes_tx_descriptor desc; |
| int err = 0; |
| |
| if (fid == DUMMY_FID) |
| return; /* Nothing's really happened */ |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " |
| "(FID=%04X error %d)\n", |
| dev->name, fid, err); |
| } else { |
| DEBUG(1, "%s: Tx error, status %d\n", |
| dev->name, le16_to_cpu(desc.status)); |
| } |
| |
| stats->tx_errors++; |
| |
| netif_wake_queue(dev); |
| hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); |
| } |
| |
| static void orinoco_tx_timeout(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| struct hermes *hw = &priv->hw; |
| |
| printk(KERN_WARNING "%s: Tx timeout! " |
| "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", |
| dev->name, hermes_read_regn(hw, ALLOCFID), |
| hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); |
| |
| stats->tx_errors++; |
| |
| schedule_work(&priv->reset_work); |
| } |
| |
| /********************************************************************/ |
| /* Rx path (data frames) */ |
| /********************************************************************/ |
| |
| /* Does the frame have a SNAP header indicating it should be |
| * de-encapsulated to Ethernet-II? */ |
| static inline int is_ethersnap(void *_hdr) |
| { |
| u8 *hdr = _hdr; |
| |
| /* We de-encapsulate all packets which, a) have SNAP headers |
| * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header |
| * and where b) the OUI of the SNAP header is 00:00:00 or |
| * 00:00:f8 - we need both because different APs appear to use |
| * different OUIs for some reason */ |
| return (memcmp(hdr, &encaps_hdr, 5) == 0) |
| && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); |
| } |
| |
| static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, |
| int level, int noise) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int i; |
| |
| /* Gather wireless spy statistics: for each packet, compare the |
| * source address with out list, and if match, get the stats... */ |
| for (i = 0; i < priv->spy_number; i++) |
| if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) { |
| priv->spy_stat[i].level = level - 0x95; |
| priv->spy_stat[i].noise = noise - 0x95; |
| priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0; |
| priv->spy_stat[i].updated = 7; |
| } |
| } |
| |
| static void orinoco_stat_gather(struct net_device *dev, |
| struct sk_buff *skb, |
| struct hermes_rx_descriptor *desc) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| /* Using spy support with lots of Rx packets, like in an |
| * infrastructure (AP), will really slow down everything, because |
| * the MAC address must be compared to each entry of the spy list. |
| * If the user really asks for it (set some address in the |
| * spy list), we do it, but he will pay the price. |
| * Note that to get here, you need both WIRELESS_SPY |
| * compiled in AND some addresses in the list !!! |
| */ |
| /* Note : gcc will optimise the whole section away if |
| * WIRELESS_SPY is not defined... - Jean II */ |
| if (SPY_NUMBER(priv)) { |
| orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN, |
| desc->signal, desc->silence); |
| } |
| } |
| |
| static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| struct iw_statistics *wstats = &priv->wstats; |
| struct sk_buff *skb = NULL; |
| u16 rxfid, status; |
| int length, data_len, data_off; |
| char *p; |
| struct hermes_rx_descriptor desc; |
| struct header_struct hdr; |
| struct ethhdr *eh; |
| int err; |
| |
| rxfid = hermes_read_regn(hw, RXFID); |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), |
| rxfid, 0); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading Rx descriptor. " |
| "Frame dropped.\n", dev->name, err); |
| stats->rx_errors++; |
| goto drop; |
| } |
| |
| status = le16_to_cpu(desc.status); |
| |
| if (status & HERMES_RXSTAT_ERR) { |
| if (status & HERMES_RXSTAT_UNDECRYPTABLE) { |
| wstats->discard.code++; |
| DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", |
| dev->name); |
| } else { |
| stats->rx_crc_errors++; |
| DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); |
| } |
| stats->rx_errors++; |
| goto drop; |
| } |
| |
| /* For now we ignore the 802.11 header completely, assuming |
| that the card's firmware has handled anything vital */ |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr), |
| rxfid, HERMES_802_3_OFFSET); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading frame header. " |
| "Frame dropped.\n", dev->name, err); |
| stats->rx_errors++; |
| goto drop; |
| } |
| |
| length = ntohs(hdr.len); |
| |
| /* Sanity checks */ |
| if (length < 3) { /* No for even an 802.2 LLC header */ |
| /* At least on Symbol firmware with PCF we get quite a |
| lot of these legitimately - Poll frames with no |
| data. */ |
| stats->rx_dropped++; |
| goto drop; |
| } |
| if (length > IEEE802_11_DATA_LEN) { |
| printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", |
| dev->name, length); |
| stats->rx_length_errors++; |
| stats->rx_errors++; |
| goto drop; |
| } |
| |
| /* We need space for the packet data itself, plus an ethernet |
| header, plus 2 bytes so we can align the IP header on a |
| 32bit boundary, plus 1 byte so we can read in odd length |
| packets from the card, which has an IO granularity of 16 |
| bits */ |
| skb = dev_alloc_skb(length+ETH_HLEN+2+1); |
| if (!skb) { |
| printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", |
| dev->name); |
| goto drop; |
| } |
| |
| skb_reserve(skb, 2); /* This way the IP header is aligned */ |
| |
| /* Handle decapsulation |
| * In most cases, the firmware tell us about SNAP frames. |
| * For some reason, the SNAP frames sent by LinkSys APs |
| * are not properly recognised by most firmwares. |
| * So, check ourselves */ |
| if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || |
| ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || |
| is_ethersnap(&hdr)) { |
| /* These indicate a SNAP within 802.2 LLC within |
| 802.11 frame which we'll need to de-encapsulate to |
| the original EthernetII frame. */ |
| |
| if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */ |
| stats->rx_length_errors++; |
| goto drop; |
| } |
| |
| /* Remove SNAP header, reconstruct EthernetII frame */ |
| data_len = length - ENCAPS_OVERHEAD; |
| data_off = HERMES_802_3_OFFSET + sizeof(hdr); |
| |
| eh = (struct ethhdr *)skb_put(skb, ETH_HLEN); |
| |
| memcpy(eh, &hdr, 2 * ETH_ALEN); |
| eh->h_proto = hdr.ethertype; |
| } else { |
| /* All other cases indicate a genuine 802.3 frame. No |
| decapsulation needed. We just throw the whole |
| thing in, and hope the protocol layer can deal with |
| it as 802.3 */ |
| data_len = length; |
| data_off = HERMES_802_3_OFFSET; |
| /* FIXME: we re-read from the card data we already read here */ |
| } |
| |
| p = skb_put(skb, data_len); |
| err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2), |
| rxfid, data_off); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading frame. " |
| "Frame dropped.\n", dev->name, err); |
| stats->rx_errors++; |
| goto drop; |
| } |
| |
| dev->last_rx = jiffies; |
| skb->dev = dev; |
| skb->protocol = eth_type_trans(skb, dev); |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| /* Process the wireless stats if needed */ |
| orinoco_stat_gather(dev, skb, &desc); |
| |
| /* Pass the packet to the networking stack */ |
| netif_rx(skb); |
| stats->rx_packets++; |
| stats->rx_bytes += length; |
| |
| return; |
| |
| drop: |
| stats->rx_dropped++; |
| |
| if (skb) |
| dev_kfree_skb_irq(skb); |
| return; |
| } |
| |
| /********************************************************************/ |
| /* Rx path (info frames) */ |
| /********************************************************************/ |
| |
| static void print_linkstatus(struct net_device *dev, u16 status) |
| { |
| char * s; |
| |
| if (suppress_linkstatus) |
| return; |
| |
| switch (status) { |
| case HERMES_LINKSTATUS_NOT_CONNECTED: |
| s = "Not Connected"; |
| break; |
| case HERMES_LINKSTATUS_CONNECTED: |
| s = "Connected"; |
| break; |
| case HERMES_LINKSTATUS_DISCONNECTED: |
| s = "Disconnected"; |
| break; |
| case HERMES_LINKSTATUS_AP_CHANGE: |
| s = "AP Changed"; |
| break; |
| case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: |
| s = "AP Out of Range"; |
| break; |
| case HERMES_LINKSTATUS_AP_IN_RANGE: |
| s = "AP In Range"; |
| break; |
| case HERMES_LINKSTATUS_ASSOC_FAILED: |
| s = "Association Failed"; |
| break; |
| default: |
| s = "UNKNOWN"; |
| } |
| |
| printk(KERN_INFO "%s: New link status: %s (%04x)\n", |
| dev->name, s, status); |
| } |
| |
| static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| u16 infofid; |
| struct { |
| u16 len; |
| u16 type; |
| } __attribute__ ((packed)) info; |
| int len, type; |
| int err; |
| |
| /* This is an answer to an INQUIRE command that we did earlier, |
| * or an information "event" generated by the card |
| * The controller return to us a pseudo frame containing |
| * the information in question - Jean II */ |
| infofid = hermes_read_regn(hw, INFOFID); |
| |
| /* Read the info frame header - don't try too hard */ |
| err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), |
| infofid, 0); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading info frame. " |
| "Frame dropped.\n", dev->name, err); |
| return; |
| } |
| |
| len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); |
| type = le16_to_cpu(info.type); |
| |
| switch (type) { |
| case HERMES_INQ_TALLIES: { |
| struct hermes_tallies_frame tallies; |
| struct iw_statistics *wstats = &priv->wstats; |
| |
| if (len > sizeof(tallies)) { |
| printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", |
| dev->name, len); |
| len = sizeof(tallies); |
| } |
| |
| /* Read directly the data (no seek) */ |
| hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, |
| len / 2); /* FIXME: blech! */ |
| |
| /* Increment our various counters */ |
| /* wstats->discard.nwid - no wrong BSSID stuff */ |
| wstats->discard.code += |
| le16_to_cpu(tallies.RxWEPUndecryptable); |
| if (len == sizeof(tallies)) |
| wstats->discard.code += |
| le16_to_cpu(tallies.RxDiscards_WEPICVError) + |
| le16_to_cpu(tallies.RxDiscards_WEPExcluded); |
| wstats->discard.misc += |
| le16_to_cpu(tallies.TxDiscardsWrongSA); |
| wstats->discard.fragment += |
| le16_to_cpu(tallies.RxMsgInBadMsgFragments); |
| wstats->discard.retries += |
| le16_to_cpu(tallies.TxRetryLimitExceeded); |
| /* wstats->miss.beacon - no match */ |
| } |
| break; |
| case HERMES_INQ_LINKSTATUS: { |
| struct hermes_linkstatus linkstatus; |
| u16 newstatus; |
| int connected; |
| |
| if (len != sizeof(linkstatus)) { |
| printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", |
| dev->name, len); |
| break; |
| } |
| |
| hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, |
| len / 2); |
| newstatus = le16_to_cpu(linkstatus.linkstatus); |
| |
| connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) |
| || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) |
| || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); |
| |
| if (connected) |
| netif_carrier_on(dev); |
| else |
| netif_carrier_off(dev); |
| |
| if (newstatus != priv->last_linkstatus) |
| print_linkstatus(dev, newstatus); |
| |
| priv->last_linkstatus = newstatus; |
| } |
| break; |
| default: |
| printk(KERN_DEBUG "%s: Unknown information frame received: " |
| "type 0x%04x, length %d\n", dev->name, type, len); |
| /* We don't actually do anything about it */ |
| break; |
| } |
| } |
| |
| static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) |
| { |
| if (net_ratelimit()) |
| printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); |
| } |
| |
| /********************************************************************/ |
| /* Internal hardware control routines */ |
| /********************************************************************/ |
| |
| int __orinoco_up(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| err = __orinoco_program_rids(dev); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d configuring card\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Fire things up again */ |
| hermes_set_irqmask(hw, ORINOCO_INTEN); |
| err = hermes_enable_port(hw, 0); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d enabling MAC port\n", |
| dev->name, err); |
| return err; |
| } |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| int __orinoco_down(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| netif_stop_queue(dev); |
| |
| if (! priv->hw_unavailable) { |
| if (! priv->broken_disableport) { |
| err = hermes_disable_port(hw, 0); |
| if (err) { |
| /* Some firmwares (e.g. Intersil 1.3.x) seem |
| * to have problems disabling the port, oh |
| * well, too bad. */ |
| printk(KERN_WARNING "%s: Error %d disabling MAC port\n", |
| dev->name, err); |
| priv->broken_disableport = 1; |
| } |
| } |
| hermes_set_irqmask(hw, 0); |
| hermes_write_regn(hw, EVACK, 0xffff); |
| } |
| |
| /* firmware will have to reassociate */ |
| netif_carrier_off(dev); |
| priv->last_linkstatus = 0xffff; |
| |
| return 0; |
| } |
| |
| int orinoco_reinit_firmware(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| err = hermes_init(hw); |
| if (err) |
| return err; |
| |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err == -EIO) { |
| /* Try workaround for old Symbol firmware bug */ |
| printk(KERN_WARNING "%s: firmware ALLOC bug detected " |
| "(old Symbol firmware?). Trying to work around... ", |
| dev->name); |
| |
| priv->nicbuf_size = TX_NICBUF_SIZE_BUG; |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err) |
| printk("failed!\n"); |
| else |
| printk("ok.\n"); |
| } |
| |
| return err; |
| } |
| |
| static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| |
| if (priv->bitratemode >= BITRATE_TABLE_SIZE) { |
| printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", |
| priv->ndev->name, priv->bitratemode); |
| return -EINVAL; |
| } |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[priv->bitratemode].agere_txratectrl); |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[priv->bitratemode].intersil_txratectrl); |
| break; |
| default: |
| BUG(); |
| } |
| |
| return err; |
| } |
| |
| /* Change the WEP keys and/or the current keys. Can be called |
| * either from __orinoco_hw_setup_wep() or directly from |
| * orinoco_ioctl_setiwencode(). In the later case the association |
| * with the AP is not broken (if the firmware can handle it), |
| * which is needed for 802.1x implementations. */ |
| static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFWEPKEYS_AGERE, |
| &priv->keys); |
| if (err) |
| return err; |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXKEY_AGERE, |
| priv->tx_key); |
| if (err) |
| return err; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| { |
| int keylen; |
| int i; |
| |
| /* Force uniform key length to work around firmware bugs */ |
| keylen = le16_to_cpu(priv->keys[priv->tx_key].len); |
| |
| if (keylen > LARGE_KEY_SIZE) { |
| printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", |
| priv->ndev->name, priv->tx_key, keylen); |
| return -E2BIG; |
| } |
| |
| /* Write all 4 keys */ |
| for(i = 0; i < ORINOCO_MAX_KEYS; i++) { |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFDEFAULTKEY0 + i, |
| HERMES_BYTES_TO_RECLEN(keylen), |
| priv->keys[i].data); |
| if (err) |
| return err; |
| } |
| |
| /* Write the index of the key used in transmission */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPDEFAULTKEYID, |
| priv->tx_key); |
| if (err) |
| return err; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int __orinoco_hw_setup_wep(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int master_wep_flag; |
| int auth_flag; |
| |
| if (priv->wep_on) |
| __orinoco_hw_setup_wepkeys(priv); |
| |
| if (priv->wep_restrict) |
| auth_flag = HERMES_AUTH_SHARED_KEY; |
| else |
| auth_flag = HERMES_AUTH_OPEN; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ |
| if (priv->wep_on) { |
| /* Enable the shared-key authentication. */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION_AGERE, |
| auth_flag); |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPENABLED_AGERE, |
| priv->wep_on); |
| if (err) |
| return err; |
| break; |
| |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ |
| if (priv->wep_on) { |
| if (priv->wep_restrict || |
| (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | |
| HERMES_WEP_EXCL_UNENCRYPTED; |
| else |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION, |
| auth_flag); |
| if (err) |
| return err; |
| } else |
| master_wep_flag = 0; |
| |
| if (priv->iw_mode == IW_MODE_MONITOR) |
| master_wep_flag |= HERMES_WEP_HOST_DECRYPT; |
| |
| /* Master WEP setting : on/off */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPFLAGS_INTERSIL, |
| master_wep_flag); |
| if (err) |
| return err; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int __orinoco_program_rids(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct hermes_idstring idbuf; |
| |
| /* Set the MAC address */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting MAC address\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set up the link mode */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, |
| priv->port_type); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting port type\n", |
| dev->name, err); |
| return err; |
| } |
| /* Set the channel/frequency */ |
| if (priv->channel == 0) { |
| printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); |
| if (priv->createibss) |
| priv->channel = 10; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, |
| priv->channel); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting channel\n", |
| dev->name, err); |
| return err; |
| } |
| |
| if (priv->has_ibss) { |
| u16 createibss; |
| |
| if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { |
| printk(KERN_WARNING "%s: This firmware requires an " |
| "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); |
| /* With wvlan_cs, in this case, we would crash. |
| * hopefully, this driver will behave better... |
| * Jean II */ |
| createibss = 0; |
| } else { |
| createibss = priv->createibss; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFCREATEIBSS, |
| createibss); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set the desired ESSID */ |
| idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); |
| memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); |
| /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting OWNSSID\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set the station name */ |
| idbuf.len = cpu_to_le16(strlen(priv->nick)); |
| memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting nickname\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set AP density */ |
| if (priv->has_sensitivity) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSYSTEMSCALE, |
| priv->ap_density); |
| if (err) { |
| printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " |
| "Disabling sensitivity control\n", |
| dev->name, err); |
| |
| priv->has_sensitivity = 0; |
| } |
| } |
| |
| /* Set RTS threshold */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| priv->rts_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting RTS threshold\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set fragmentation threshold or MWO robustness */ |
| if (priv->has_mwo) |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| priv->mwo_robust); |
| else |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| priv->frag_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting fragmentation\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set bitrate */ |
| err = __orinoco_hw_set_bitrate(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting bitrate\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set power management */ |
| if (priv->has_pm) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMENABLED, |
| priv->pm_on); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMULTICASTRECEIVE, |
| priv->pm_mcast); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| priv->pm_period); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| priv->pm_timeout); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set preamble - only for Symbol so far... */ |
| if (priv->has_preamble) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| priv->preamble); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting preamble\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set up encryption */ |
| if (priv->has_wep) { |
| err = __orinoco_hw_setup_wep(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d activating WEP\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set promiscuity / multicast*/ |
| priv->promiscuous = 0; |
| priv->mc_count = 0; |
| __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */ |
| |
| return 0; |
| } |
| |
| /* FIXME: return int? */ |
| static void |
| __orinoco_set_multicast_list(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int promisc, mc_count; |
| |
| /* The Hermes doesn't seem to have an allmulti mode, so we go |
| * into promiscuous mode and let the upper levels deal. */ |
| if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || |
| (dev->mc_count > MAX_MULTICAST(priv)) ) { |
| promisc = 1; |
| mc_count = 0; |
| } else { |
| promisc = 0; |
| mc_count = dev->mc_count; |
| } |
| |
| if (promisc != priv->promiscuous) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPROMISCUOUSMODE, |
| promisc); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", |
| dev->name, err); |
| } else |
| priv->promiscuous = promisc; |
| } |
| |
| if (! promisc && (mc_count || priv->mc_count) ) { |
| struct dev_mc_list *p = dev->mc_list; |
| struct hermes_multicast mclist; |
| int i; |
| |
| for (i = 0; i < mc_count; i++) { |
| /* paranoia: is list shorter than mc_count? */ |
| BUG_ON(! p); |
| /* paranoia: bad address size in list? */ |
| BUG_ON(p->dmi_addrlen != ETH_ALEN); |
| |
| memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); |
| p = p->next; |
| } |
| |
| if (p) |
| printk(KERN_WARNING "%s: Multicast list is " |
| "longer than mc_count\n", dev->name); |
| |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, |
| HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), |
| &mclist); |
| if (err) |
| printk(KERN_ERR "%s: Error %d setting multicast list.\n", |
| dev->name, err); |
| else |
| priv->mc_count = mc_count; |
| } |
| |
| /* Since we can set the promiscuous flag when it wasn't asked |
| for, make sure the net_device knows about it. */ |
| if (priv->promiscuous) |
| dev->flags |= IFF_PROMISC; |
| else |
| dev->flags &= ~IFF_PROMISC; |
| } |
| |
| static int orinoco_reconfigure(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| unsigned long flags; |
| int err = 0; |
| |
| if (priv->broken_disableport) { |
| schedule_work(&priv->reset_work); |
| return 0; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_disable_port(hw, 0); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n", |
| dev->name); |
| priv->broken_disableport = 1; |
| goto out; |
| } |
| |
| err = __orinoco_program_rids(dev); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to reconfigure card\n", |
| dev->name); |
| goto out; |
| } |
| |
| err = hermes_enable_port(hw, 0); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", |
| dev->name); |
| goto out; |
| } |
| |
| out: |
| if (err) { |
| printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); |
| schedule_work(&priv->reset_work); |
| err = 0; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| return err; |
| |
| } |
| |
| /* This must be called from user context, without locks held - use |
| * schedule_work() */ |
| static void orinoco_reset(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| /* When the hardware becomes available again, whatever |
| * detects that is responsible for re-initializing |
| * it. So no need for anything further */ |
| return; |
| |
| netif_stop_queue(dev); |
| |
| /* Shut off interrupts. Depending on what state the hardware |
| * is in, this might not work, but we'll try anyway */ |
| hermes_set_irqmask(hw, 0); |
| hermes_write_regn(hw, EVACK, 0xffff); |
| |
| priv->hw_unavailable++; |
| priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ |
| netif_carrier_off(dev); |
| |
| orinoco_unlock(priv, &flags); |
| |
| if (priv->hard_reset) |
| err = (*priv->hard_reset)(priv); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d " |
| "performing hard reset\n", dev->name, err); |
| /* FIXME: shutdown of some sort */ |
| return; |
| } |
| |
| err = orinoco_reinit_firmware(dev); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", |
| dev->name, err); |
| return; |
| } |
| |
| spin_lock_irq(&priv->lock); /* This has to be called from user context */ |
| |
| priv->hw_unavailable--; |
| |
| /* priv->open or priv->hw_unavailable might have changed while |
| * we dropped the lock */ |
| if (priv->open && (! priv->hw_unavailable)) { |
| err = __orinoco_up(dev); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", |
| dev->name, err); |
| } else |
| dev->trans_start = jiffies; |
| } |
| |
| spin_unlock_irq(&priv->lock); |
| |
| return; |
| } |
| |
| /********************************************************************/ |
| /* Interrupt handler */ |
| /********************************************************************/ |
| |
| static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) |
| { |
| printk(KERN_DEBUG "%s: TICK\n", dev->name); |
| } |
| |
| static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) |
| { |
| /* This seems to happen a fair bit under load, but ignoring it |
| seems to work fine...*/ |
| printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", |
| dev->name); |
| } |
| |
| irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int count = MAX_IRQLOOPS_PER_IRQ; |
| u16 evstat, events; |
| /* These are used to detect a runaway interrupt situation */ |
| /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, |
| * we panic and shut down the hardware */ |
| static int last_irq_jiffy = 0; /* jiffies value the last time |
| * we were called */ |
| static int loops_this_jiffy = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| /* If hw is unavailable - we don't know if the irq was |
| * for us or not */ |
| return IRQ_HANDLED; |
| } |
| |
| evstat = hermes_read_regn(hw, EVSTAT); |
| events = evstat & hw->inten; |
| if (! events) { |
| orinoco_unlock(priv, &flags); |
| return IRQ_NONE; |
| } |
| |
| if (jiffies != last_irq_jiffy) |
| loops_this_jiffy = 0; |
| last_irq_jiffy = jiffies; |
| |
| while (events && count--) { |
| if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { |
| printk(KERN_WARNING "%s: IRQ handler is looping too " |
| "much! Resetting.\n", dev->name); |
| /* Disable interrupts for now */ |
| hermes_set_irqmask(hw, 0); |
| schedule_work(&priv->reset_work); |
| break; |
| } |
| |
| /* Check the card hasn't been removed */ |
| if (! hermes_present(hw)) { |
| DEBUG(0, "orinoco_interrupt(): card removed\n"); |
| break; |
| } |
| |
| if (events & HERMES_EV_TICK) |
| __orinoco_ev_tick(dev, hw); |
| if (events & HERMES_EV_WTERR) |
| __orinoco_ev_wterr(dev, hw); |
| if (events & HERMES_EV_INFDROP) |
| __orinoco_ev_infdrop(dev, hw); |
| if (events & HERMES_EV_INFO) |
| __orinoco_ev_info(dev, hw); |
| if (events & HERMES_EV_RX) |
| __orinoco_ev_rx(dev, hw); |
| if (events & HERMES_EV_TXEXC) |
| __orinoco_ev_txexc(dev, hw); |
| if (events & HERMES_EV_TX) |
| __orinoco_ev_tx(dev, hw); |
| if (events & HERMES_EV_ALLOC) |
| __orinoco_ev_alloc(dev, hw); |
| |
| hermes_write_regn(hw, EVACK, events); |
| |
| evstat = hermes_read_regn(hw, EVSTAT); |
| events = evstat & hw->inten; |
| }; |
| |
| orinoco_unlock(priv, &flags); |
| return IRQ_HANDLED; |
| } |
| |
| /********************************************************************/ |
| /* Initialization */ |
| /********************************************************************/ |
| |
| struct comp_id { |
| u16 id, variant, major, minor; |
| } __attribute__ ((packed)); |
| |
| static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) |
| { |
| if (nic_id->id < 0x8000) |
| return FIRMWARE_TYPE_AGERE; |
| else if (nic_id->id == 0x8000 && nic_id->major == 0) |
| return FIRMWARE_TYPE_SYMBOL; |
| else |
| return FIRMWARE_TYPE_INTERSIL; |
| } |
| |
| /* Set priv->firmware type, determine firmware properties */ |
| static int determine_firmware(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct comp_id nic_id, sta_id; |
| unsigned int firmver; |
| char tmp[SYMBOL_MAX_VER_LEN+1]; |
| |
| /* Get the hardware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); |
| if (err) { |
| printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", |
| dev->name, err); |
| return err; |
| } |
| |
| le16_to_cpus(&nic_id.id); |
| le16_to_cpus(&nic_id.variant); |
| le16_to_cpus(&nic_id.major); |
| le16_to_cpus(&nic_id.minor); |
| printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", |
| dev->name, nic_id.id, nic_id.variant, |
| nic_id.major, nic_id.minor); |
| |
| priv->firmware_type = determine_firmware_type(&nic_id); |
| |
| /* Get the firmware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); |
| if (err) { |
| printk(KERN_ERR "%s: Cannot read station identity: error %d\n", |
| dev->name, err); |
| return err; |
| } |
| |
| le16_to_cpus(&sta_id.id); |
| le16_to_cpus(&sta_id.variant); |
| le16_to_cpus(&sta_id.major); |
| le16_to_cpus(&sta_id.minor); |
| printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", |
| dev->name, sta_id.id, sta_id.variant, |
| sta_id.major, sta_id.minor); |
| |
| switch (sta_id.id) { |
| case 0x15: |
| printk(KERN_ERR "%s: Primary firmware is active\n", |
| dev->name); |
| return -ENODEV; |
| case 0x14b: |
| printk(KERN_ERR "%s: Tertiary firmware is active\n", |
| dev->name); |
| return -ENODEV; |
| case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ |
| case 0x21: /* Symbol Spectrum24 Trilogy */ |
| break; |
| default: |
| printk(KERN_NOTICE "%s: Unknown station ID, please report\n", |
| dev->name); |
| break; |
| } |
| |
| /* Default capabilities */ |
| priv->has_sensitivity = 1; |
| priv->has_mwo = 0; |
| priv->has_preamble = 0; |
| priv->has_port3 = 1; |
| priv->has_ibss = 1; |
| priv->has_wep = 0; |
| priv->has_big_wep = 0; |
| |
| /* Determine capabilities from the firmware version */ |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, |
| ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; |
| |
| priv->has_ibss = (firmver >= 0x60006); |
| priv->has_wep = (firmver >= 0x40020); |
| priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell |
| Gold cards from the others? */ |
| priv->has_mwo = (firmver >= 0x60000); |
| priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ |
| priv->ibss_port = 1; |
| |
| /* Tested with Agere firmware : |
| * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II |
| * Tested CableTron firmware : 4.32 => Anton */ |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ |
| /* Intel MAC : 00:02:B3:* */ |
| /* 3Com MAC : 00:50:DA:* */ |
| memset(tmp, 0, sizeof(tmp)); |
| /* Get the Symbol firmware version */ |
| err = hermes_read_ltv(hw, USER_BAP, |
| HERMES_RID_SECONDARYVERSION_SYMBOL, |
| SYMBOL_MAX_VER_LEN, NULL, &tmp); |
| if (err) { |
| printk(KERN_WARNING |
| "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", |
| dev->name, err); |
| firmver = 0; |
| tmp[0] = '\0'; |
| } else { |
| /* The firmware revision is a string, the format is |
| * something like : "V2.20-01". |
| * Quick and dirty parsing... - Jean II |
| */ |
| firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) |
| | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) |
| | (tmp[7] - '0'); |
| |
| tmp[SYMBOL_MAX_VER_LEN] = '\0'; |
| } |
| |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Symbol %s", tmp); |
| |
| priv->has_ibss = (firmver >= 0x20000); |
| priv->has_wep = (firmver >= 0x15012); |
| priv->has_big_wep = (firmver >= 0x20000); |
| priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || |
| (firmver >= 0x29000 && firmver < 0x30000) || |
| firmver >= 0x31000; |
| priv->has_preamble = (firmver >= 0x20000); |
| priv->ibss_port = 4; |
| /* Tested with Intel firmware : 0x20015 => Jean II */ |
| /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| /* D-Link, Linksys, Adtron, ZoomAir, and many others... |
| * Samsung, Compaq 100/200 and Proxim are slightly |
| * different and less well tested */ |
| /* D-Link MAC : 00:40:05:* */ |
| /* Addtron MAC : 00:90:D1:* */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Intersil %d.%d.%d", sta_id.major, sta_id.minor, |
| sta_id.variant); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | |
| ((unsigned long)sta_id.minor << 8) | sta_id.variant; |
| |
| priv->has_ibss = (firmver >= 0x000700); /* FIXME */ |
| priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); |
| priv->has_pm = (firmver >= 0x000700); |
| |
| if (firmver >= 0x000800) |
| priv->ibss_port = 0; |
| else { |
| printk(KERN_NOTICE "%s: Intersil firmware earlier " |
| "than v0.8.x - several features not supported\n", |
| dev->name); |
| priv->ibss_port = 1; |
| } |
| break; |
| } |
| printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, |
| priv->fw_name); |
| |
| return 0; |
| } |
| |
| static int orinoco_init(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| struct hermes_idstring nickbuf; |
| u16 reclen; |
| int len; |
| |
| TRACE_ENTER(dev->name); |
| |
| /* No need to lock, the hw_unavailable flag is already set in |
| * alloc_orinocodev() */ |
| priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; |
| |
| /* Initialize the firmware */ |
| err = hermes_init(hw); |
| if (err != 0) { |
| printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", |
| dev->name, err); |
| goto out; |
| } |
| |
| err = determine_firmware(dev); |
| if (err != 0) { |
| printk(KERN_ERR "%s: Incompatible firmware, aborting\n", |
| dev->name); |
| goto out; |
| } |
| |
| if (priv->has_port3) |
| printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); |
| if (priv->has_ibss) |
| printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", |
| dev->name); |
| if (priv->has_wep) { |
| printk(KERN_DEBUG "%s: WEP supported, ", dev->name); |
| if (priv->has_big_wep) |
| printk("104-bit key\n"); |
| else |
| printk("40-bit key\n"); |
| } |
| |
| /* Get the MAC address */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| ETH_ALEN, NULL, dev->dev_addr); |
| if (err) { |
| printk(KERN_WARNING "%s: failed to read MAC address!\n", |
| dev->name); |
| goto out; |
| } |
| |
| printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", |
| dev->name, dev->dev_addr[0], dev->dev_addr[1], |
| dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], |
| dev->dev_addr[5]); |
| |
| /* Get the station name */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| sizeof(nickbuf), &reclen, &nickbuf); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read station name\n", |
| dev->name); |
| goto out; |
| } |
| if (nickbuf.len) |
| len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); |
| else |
| len = min(IW_ESSID_MAX_SIZE, 2 * reclen); |
| memcpy(priv->nick, &nickbuf.val, len); |
| priv->nick[len] = '\0'; |
| |
| printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); |
| |
| /* Get allowed channels */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, |
| &priv->channel_mask); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read channel list!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Get initial AP density */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, |
| &priv->ap_density); |
| if (err || priv->ap_density < 1 || priv->ap_density > 3) { |
| priv->has_sensitivity = 0; |
| } |
| |
| /* Get initial RTS threshold */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| &priv->rts_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read RTS threshold!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Get initial fragmentation settings */ |
| if (priv->has_mwo) |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| &priv->mwo_robust); |
| else |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| &priv->frag_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read fragmentation settings!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Power management setup */ |
| if (priv->has_pm) { |
| priv->pm_on = 0; |
| priv->pm_mcast = 1; |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| &priv->pm_period); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read power management period!\n", |
| dev->name); |
| goto out; |
| } |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| &priv->pm_timeout); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read power management timeout!\n", |
| dev->name); |
| goto out; |
| } |
| } |
| |
| /* Preamble setup */ |
| if (priv->has_preamble) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| &priv->preamble); |
| if (err) |
| goto out; |
| } |
| |
| /* Set up the default configuration */ |
| priv->iw_mode = IW_MODE_INFRA; |
| /* By default use IEEE/IBSS ad-hoc mode if we have it */ |
| priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); |
| set_port_type(priv); |
| priv->channel = 10; /* default channel, more-or-less arbitrary */ |
| |
| priv->promiscuous = 0; |
| priv->wep_on = 0; |
| priv->tx_key = 0; |
| |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err == -EIO) { |
| /* Try workaround for old Symbol firmware bug */ |
| printk(KERN_WARNING "%s: firmware ALLOC bug detected " |
| "(old Symbol firmware?). Trying to work around... ", |
| dev->name); |
| |
| priv->nicbuf_size = TX_NICBUF_SIZE_BUG; |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err) |
| printk("failed!\n"); |
| else |
| printk("ok.\n"); |
| } |
| if (err) { |
| printk("%s: Error %d allocating Tx buffer\n", dev->name, err); |
| goto out; |
| } |
| |
| /* Make the hardware available, as long as it hasn't been |
| * removed elsewhere (e.g. by PCMCIA hot unplug) */ |
| spin_lock_irq(&priv->lock); |
| priv->hw_unavailable--; |
| spin_unlock_irq(&priv->lock); |
| |
| printk(KERN_DEBUG "%s: ready\n", dev->name); |
| |
| out: |
| TRACE_EXIT(dev->name); |
| return err; |
| } |
| |
| struct net_device *alloc_orinocodev(int sizeof_card, |
| int (*hard_reset)(struct orinoco_private *)) |
| { |
| struct net_device *dev; |
| struct orinoco_private *priv; |
| |
| dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); |
| if (! dev) |
| return NULL; |
| priv = netdev_priv(dev); |
| priv->ndev = dev; |
| if (sizeof_card) |
| priv->card = (void *)((unsigned long)netdev_priv(dev) |
| + sizeof(struct orinoco_private)); |
| else |
| priv->card = NULL; |
| |
| /* Setup / override net_device fields */ |
| dev->init = orinoco_init; |
| dev->hard_start_xmit = orinoco_xmit; |
| dev->tx_timeout = orinoco_tx_timeout; |
| dev->watchdog_timeo = HZ; /* 1 second timeout */ |
| dev->get_stats = orinoco_get_stats; |
| dev->get_wireless_stats = orinoco_get_wireless_stats; |
| dev->do_ioctl = orinoco_ioctl; |
| dev->change_mtu = orinoco_change_mtu; |
| dev->set_multicast_list = orinoco_set_multicast_list; |
| /* we use the default eth_mac_addr for setting the MAC addr */ |
| |
| /* Set up default callbacks */ |
| dev->open = orinoco_open; |
| dev->stop = orinoco_stop; |
| priv->hard_reset = hard_reset; |
| |
| spin_lock_init(&priv->lock); |
| priv->open = 0; |
| priv->hw_unavailable = 1; /* orinoco_init() must clear this |
| * before anything else touches the |
| * hardware */ |
| INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); |
| |
| netif_carrier_off(dev); |
| priv->last_linkstatus = 0xffff; |
| |
| return dev; |
| |
| } |
| |
| void free_orinocodev(struct net_device *dev) |
| { |
| free_netdev(dev); |
| } |
| |
| /********************************************************************/ |
| /* Wireless extensions */ |
| /********************************************************************/ |
| |
| static int orinoco_hw_get_bssid(struct orinoco_private *priv, |
| char buf[ETH_ALEN]) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, |
| ETH_ALEN, NULL, buf); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, |
| char buf[IW_ESSID_MAX_SIZE+1]) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| struct hermes_idstring essidbuf; |
| char *p = (char *)(&essidbuf.val); |
| int len; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (strlen(priv->desired_essid) > 0) { |
| /* We read the desired SSID from the hardware rather |
| than from priv->desired_essid, just in case the |
| firmware is allowed to change it on us. I'm not |
| sure about this */ |
| /* My guess is that the OWNSSID should always be whatever |
| * we set to the card, whereas CURRENT_SSID is the one that |
| * may change... - Jean II */ |
| u16 rid; |
| |
| *active = 1; |
| |
| rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : |
| HERMES_RID_CNFDESIREDSSID; |
| |
| err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), |
| NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } else { |
| *active = 0; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, |
| sizeof(essidbuf), NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } |
| |
| len = le16_to_cpu(essidbuf.len); |
| |
| memset(buf, 0, IW_ESSID_MAX_SIZE+1); |
| memcpy(buf, p, len); |
| buf[len] = '\0'; |
| |
| fail_unlock: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static long orinoco_hw_get_freq(struct orinoco_private *priv) |
| { |
| |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 channel; |
| long freq = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); |
| if (err) |
| goto out; |
| |
| /* Intersil firmware 1.3.5 returns 0 when the interface is down */ |
| if (channel == 0) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| if ( (channel < 1) || (channel > NUM_CHANNELS) ) { |
| printk(KERN_WARNING "%s: Channel out of range (%d)!\n", |
| priv->ndev->name, channel); |
| err = -EBUSY; |
| goto out; |
| |
| } |
| freq = channel_frequency[channel-1] * 100000; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| if (err > 0) |
| err = -EBUSY; |
| return err ? err : freq; |
| } |
| |
| static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, |
| int *numrates, s32 *rates, int max) |
| { |
| hermes_t *hw = &priv->hw; |
| struct hermes_idstring list; |
| unsigned char *p = (unsigned char *)&list.val; |
| int err = 0; |
| int num; |
| int i; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, |
| sizeof(list), NULL, &list); |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return err; |
| |
| num = le16_to_cpu(list.len); |
| *numrates = num; |
| num = min(num, max); |
| |
| for (i = 0; i < num; i++) { |
| rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ |
| } |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| int mode; |
| struct iw_range range; |
| int numrates; |
| int i, k; |
| unsigned long flags; |
| |
| TRACE_ENTER(dev->name); |
| |
| if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range))) |
| return -EFAULT; |
| |
| rrq->length = sizeof(range); |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| mode = priv->iw_mode; |
| orinoco_unlock(priv, &flags); |
| |
| memset(&range, 0, sizeof(range)); |
| |
| /* Much of this shamelessly taken from wvlan_cs.c. No idea |
| * what it all means -dgibson */ |
| range.we_version_compiled = WIRELESS_EXT; |
| range.we_version_source = 11; |
| |
| range.min_nwid = range.max_nwid = 0; /* We don't use nwids */ |
| |
| /* Set available channels/frequencies */ |
| range.num_channels = NUM_CHANNELS; |
| k = 0; |
| for (i = 0; i < NUM_CHANNELS; i++) { |
| if (priv->channel_mask & (1 << i)) { |
| range.freq[k].i = i + 1; |
| range.freq[k].m = channel_frequency[i] * 100000; |
| range.freq[k].e = 1; |
| k++; |
| } |
| |
| if (k >= IW_MAX_FREQUENCIES) |
| break; |
| } |
| range.num_frequency = k; |
| |
| range.sensitivity = 3; |
| |
| if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ |
| /* Quality stats meaningless in ad-hoc mode */ |
| range.max_qual.qual = 0; |
| range.max_qual.level = 0; |
| range.max_qual.noise = 0; |
| range.avg_qual.qual = 0; |
| range.avg_qual.level = 0; |
| range.avg_qual.noise = 0; |
| } else { |
| range.max_qual.qual = 0x8b - 0x2f; |
| range.max_qual.level = 0x2f - 0x95 - 1; |
| range.max_qual.noise = 0x2f - 0x95 - 1; |
| /* Need to get better values */ |
| range.avg_qual.qual = 0x24; |
| range.avg_qual.level = 0xC2; |
| range.avg_qual.noise = 0x9E; |
| } |
| |
| err = orinoco_hw_get_bitratelist(priv, &numrates, |
| range.bitrate, IW_MAX_BITRATES); |
| if (err) |
| return err; |
| range.num_bitrates = numrates; |
| |
| /* Set an indication of the max TCP throughput in bit/s that we can |
| * expect using this interface. May be use for QoS stuff... |
| * Jean II */ |
| if(numrates > 2) |
| range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ |
| else |
| range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ |
| |
| range.min_rts = 0; |
| range.max_rts = 2347; |
| range.min_frag = 256; |
| range.max_frag = 2346; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| if (priv->has_wep) { |
| range.max_encoding_tokens = ORINOCO_MAX_KEYS; |
| |
| range.encoding_size[0] = SMALL_KEY_SIZE; |
| range.num_encoding_sizes = 1; |
| |
| if (priv->has_big_wep) { |
| range.encoding_size[1] = LARGE_KEY_SIZE; |
| range.num_encoding_sizes = 2; |
| } |
| } else { |
| range.num_encoding_sizes = 0; |
| range.max_encoding_tokens = 0; |
| } |
| orinoco_unlock(priv, &flags); |
| |
| range.min_pmp = 0; |
| range.max_pmp = 65535000; |
| range.min_pmt = 0; |
| range.max_pmt = 65535 * 1000; /* ??? */ |
| range.pmp_flags = IW_POWER_PERIOD; |
| range.pmt_flags = IW_POWER_TIMEOUT; |
| range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; |
| |
| range.num_txpower = 1; |
| range.txpower[0] = 15; /* 15dBm */ |
| range.txpower_capa = IW_TXPOW_DBM; |
| |
| range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; |
| range.retry_flags = IW_RETRY_LIMIT; |
| range.r_time_flags = IW_RETRY_LIFETIME; |
| range.min_retry = 0; |
| range.max_retry = 65535; /* ??? */ |
| range.min_r_time = 0; |
| range.max_r_time = 65535 * 1000; /* ??? */ |
| |
| if (copy_to_user(rrq->pointer, &range, sizeof(range))) |
| return -EFAULT; |
| |
| TRACE_EXIT(dev->name); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int index = (erq->flags & IW_ENCODE_INDEX) - 1; |
| int setindex = priv->tx_key; |
| int enable = priv->wep_on; |
| int restricted = priv->wep_restrict; |
| u16 xlen = 0; |
| int err = 0; |
| char keybuf[ORINOCO_MAX_KEY_SIZE]; |
| unsigned long flags; |
| |
| if (! priv->has_wep) |
| return -EOPNOTSUPP; |
| |
| if (erq->pointer) { |
| /* We actually have a key to set - check its length */ |
| if (erq->length > LARGE_KEY_SIZE) |
| return -E2BIG; |
| |
| if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) |
| return -E2BIG; |
| |
| if (copy_from_user(keybuf, erq->pointer, erq->length)) |
| return -EFAULT; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (erq->pointer) { |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) |
| index = priv->tx_key; |
| |
| /* Adjust key length to a supported value */ |
| if (erq->length > SMALL_KEY_SIZE) { |
| xlen = LARGE_KEY_SIZE; |
| } else if (erq->length > 0) { |
| xlen = SMALL_KEY_SIZE; |
| } else |
| xlen = 0; |
| |
| /* Switch on WEP if off */ |
| if ((!enable) && (xlen > 0)) { |
| setindex = index; |
| enable = 1; |
| } |
| } else { |
| /* Important note : if the user do "iwconfig eth0 enc off", |
| * we will arrive there with an index of -1. This is valid |
| * but need to be taken care off... Jean II */ |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { |
| if((index != -1) || (erq->flags == 0)) { |
| err = -EINVAL; |
| goto out; |
| } |
| } else { |
| /* Set the index : Check that the key is valid */ |
| if(priv->keys[index].len == 0) { |
| err = -EINVAL; |
| goto out; |
| } |
| setindex = index; |
| } |
| } |
| |
| if (erq->flags & IW_ENCODE_DISABLED) |
| enable = 0; |
| if (erq->flags & IW_ENCODE_OPEN) |
| restricted = 0; |
| if (erq->flags & IW_ENCODE_RESTRICTED) |
| restricted = 1; |
| |
| if (erq->pointer) { |
| priv->keys[index].len = cpu_to_le16(xlen); |
| memset(priv->keys[index].data, 0, |
| sizeof(priv->keys[index].data)); |
| memcpy(priv->keys[index].data, keybuf, erq->length); |
| } |
| priv->tx_key = setindex; |
| |
| /* Try fast key change if connected and only keys are changed */ |
| if (priv->wep_on && enable && (priv->wep_restrict == restricted) && |
| netif_carrier_ok(dev)) { |
| err = __orinoco_hw_setup_wepkeys(priv); |
| /* No need to commit if successful */ |
| goto out; |
| } |
| |
| priv->wep_on = enable; |
| priv->wep_restrict = restricted; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int index = (erq->flags & IW_ENCODE_INDEX) - 1; |
| u16 xlen = 0; |
| char keybuf[ORINOCO_MAX_KEY_SIZE]; |
| unsigned long flags; |
| |
| if (! priv->has_wep) |
| return -EOPNOTSUPP; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) |
| index = priv->tx_key; |
| |
| erq->flags = 0; |
| if (! priv->wep_on) |
| erq->flags |= IW_ENCODE_DISABLED; |
| erq->flags |= index + 1; |
| |
| if (priv->wep_restrict) |
| erq->flags |= IW_ENCODE_RESTRICTED; |
| else |
| erq->flags |= IW_ENCODE_OPEN; |
| |
| xlen = le16_to_cpu(priv->keys[index].len); |
| |
| erq->length = xlen; |
| |
| memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); |
| |
| orinoco_unlock(priv, &flags); |
| |
| if (erq->pointer) { |
| if (copy_to_user(erq->pointer, keybuf, xlen)) |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| char essidbuf[IW_ESSID_MAX_SIZE+1]; |
| unsigned long flags; |
| |
| /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it |
| * anyway... - Jean II */ |
| |
| memset(&essidbuf, 0, sizeof(essidbuf)); |
| |
| if (erq->flags) { |
| if (erq->length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| if (copy_from_user(&essidbuf, erq->pointer, erq->length)) |
| return -EFAULT; |
| |
| essidbuf[erq->length] = '\0'; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid)); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| char essidbuf[IW_ESSID_MAX_SIZE+1]; |
| int active; |
| int err = 0; |
| unsigned long flags; |
| |
| TRACE_ENTER(dev->name); |
| |
| if (netif_running(dev)) { |
| err = orinoco_hw_get_essid(priv, &active, essidbuf); |
| if (err) |
| return err; |
| } else { |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf)); |
| orinoco_unlock(priv, &flags); |
| } |
| |
| erq->flags = 1; |
| erq->length = strlen(essidbuf) + 1; |
| if (erq->pointer) |
| if (copy_to_user(erq->pointer, essidbuf, erq->length)) |
| return -EFAULT; |
| |
| TRACE_EXIT(dev->name); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| char nickbuf[IW_ESSID_MAX_SIZE+1]; |
| unsigned long flags; |
| |
| if (nrq->length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| memset(nickbuf, 0, sizeof(nickbuf)); |
| |
| if (copy_from_user(nickbuf, nrq->pointer, nrq->length)) |
| return -EFAULT; |
| |
| nickbuf[nrq->length] = '\0'; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| memcpy(priv->nick, nickbuf, sizeof(priv->nick)); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| char nickbuf[IW_ESSID_MAX_SIZE+1]; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); |
| orinoco_unlock(priv, &flags); |
| |
| nrq->length = strlen(nickbuf)+1; |
| |
| if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int chan = -1; |
| unsigned long flags; |
| |
| /* We can only use this in Ad-Hoc demo mode to set the operating |
| * frequency, or in IBSS mode to set the frequency where the IBSS |
| * will be created - Jean II */ |
| if (priv->iw_mode != IW_MODE_ADHOC) |
| return -EOPNOTSUPP; |
| |
| if ( (frq->e == 0) && (frq->m <= 1000) ) { |
| /* Setting by channel number */ |
| chan = frq->m; |
| } else { |
| /* Setting by frequency - search the table */ |
| int mult = 1; |
| int i; |
| |
| for (i = 0; i < (6 - frq->e); i++) |
| mult *= 10; |
| |
| for (i = 0; i < NUM_CHANNELS; i++) |
| if (frq->m == (channel_frequency[i] * mult)) |
| chan = i+1; |
| } |
| |
| if ( (chan < 1) || (chan > NUM_CHANNELS) || |
| ! (priv->channel_mask & (1 << (chan-1)) ) ) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| priv->channel = chan; |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| u16 val; |
| int err; |
| unsigned long flags; |
| |
| if (!priv->has_sensitivity) |
| return -EOPNOTSUPP; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSYSTEMSCALE, &val); |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return err; |
| |
| srq->value = val; |
| srq->fixed = 0; /* auto */ |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = srq->value; |
| unsigned long flags; |
| |
| if (!priv->has_sensitivity) |
| return -EOPNOTSUPP; |
| |
| if ((val < 1) || (val > 3)) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| priv->ap_density = val; |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = rrq->value; |
| unsigned long flags; |
| |
| if (rrq->disabled) |
| val = 2347; |
| |
| if ( (val < 0) || (val > 2347) ) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->rts_thresh = val; |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (priv->has_mwo) { |
| if (frq->disabled) |
| priv->mwo_robust = 0; |
| else { |
| if (frq->fixed) |
| printk(KERN_WARNING "%s: Fixed fragmentation is " |
| "not supported on this firmware. " |
| "Using MWO robust instead.\n", dev->name); |
| priv->mwo_robust = 1; |
| } |
| } else { |
| if (frq->disabled) |
| priv->frag_thresh = 2346; |
| else { |
| if ( (frq->value < 256) || (frq->value > 2346) ) |
| err = -EINVAL; |
| else |
| priv->frag_thresh = frq->value & ~0x1; /* must be even */ |
| } |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 val; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (priv->has_mwo) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| &val); |
| if (err) |
| val = 0; |
| |
| frq->value = val ? 2347 : 0; |
| frq->disabled = ! val; |
| frq->fixed = 0; |
| } else { |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| &val); |
| if (err) |
| val = 0; |
| |
| frq->value = val; |
| frq->disabled = (val >= 2346); |
| frq->fixed = 1; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| int ratemode = -1; |
| int bitrate; /* 100s of kilobits */ |
| int i; |
| unsigned long flags; |
| |
| /* As the user space doesn't know our highest rate, it uses -1 |
| * to ask us to set the highest rate. Test it using "iwconfig |
| * ethX rate auto" - Jean II */ |
| if (rrq->value == -1) |
| bitrate = 110; |
| else { |
| if (rrq->value % 100000) |
| return -EINVAL; |
| bitrate = rrq->value / 100000; |
| } |
| |
| if ( (bitrate != 10) && (bitrate != 20) && |
| (bitrate != 55) && (bitrate != 110) ) |
| return -EINVAL; |
| |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| if ( (bitrate_table[i].bitrate == bitrate) && |
| (bitrate_table[i].automatic == ! rrq->fixed) ) { |
| ratemode = i; |
| break; |
| } |
| |
| if (ratemode == -1) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| priv->bitratemode = ratemode; |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int ratemode; |
| int i; |
| u16 val; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| ratemode = priv->bitratemode; |
| |
| BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); |
| |
| rrq->value = bitrate_table[ratemode].bitrate * 100000; |
| rrq->fixed = ! bitrate_table[ratemode].automatic; |
| rrq->disabled = 0; |
| |
| /* If the interface is running we try to find more about the |
| current mode */ |
| if (netif_running(dev)) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CURRENTTXRATE, &val); |
| if (err) |
| goto out; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ |
| /* Note : in Lucent firmware, the return value of |
| * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, |
| * and therefore is totally different from the |
| * encoding of HERMES_RID_CNFTXRATECONTROL. |
| * Don't forget that 6Mb/s is really 5.5Mb/s */ |
| if (val == 6) |
| rrq->value = 5500000; |
| else |
| rrq->value = val * 1000000; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| if (bitrate_table[i].intersil_txratectrl == val) { |
| ratemode = i; |
| break; |
| } |
| if (i >= BITRATE_TABLE_SIZE) |
| printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", |
| dev->name, val); |
| |
| rrq->value = bitrate_table[ratemode].bitrate * 100000; |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (prq->disabled) { |
| priv->pm_on = 0; |
| } else { |
| switch (prq->flags & IW_POWER_MODE) { |
| case IW_POWER_UNICAST_R: |
| priv->pm_mcast = 0; |
| priv->pm_on = 1; |
| break; |
| case IW_POWER_ALL_R: |
| priv->pm_mcast = 1; |
| priv->pm_on = 1; |
| break; |
| case IW_POWER_ON: |
| /* No flags : but we may have a value - Jean II */ |
| break; |
| default: |
| err = -EINVAL; |
| } |
| if (err) |
| goto out; |
| |
| if (prq->flags & IW_POWER_TIMEOUT) { |
| priv->pm_on = 1; |
| priv->pm_timeout = prq->value / 1000; |
| } |
| if (prq->flags & IW_POWER_PERIOD) { |
| priv->pm_on = 1; |
| priv->pm_period = prq->value / 1000; |
| } |
| /* It's valid to not have a value if we are just toggling |
| * the flags... Jean II */ |
| if(!priv->pm_on) { |
| err = -EINVAL; |
| goto out; |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 enable, period, timeout, mcast; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, &period); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); |
| if (err) |
| goto out; |
| |
| prq->disabled = !enable; |
| /* Note : by default, display the period */ |
| if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { |
| prq->flags = IW_POWER_TIMEOUT; |
| prq->value = timeout * 1000; |
| } else { |
| prq->flags = IW_POWER_PERIOD; |
| prq->value = period * 1000; |
| } |
| if (mcast) |
| prq->flags |= IW_POWER_ALL_R; |
| else |
| prq->flags |= IW_POWER_UNICAST_R; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 short_limit, long_limit, lifetime; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, |
| &short_limit); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, |
| &long_limit); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, |
| &lifetime); |
| if (err) |
| goto out; |
| |
| rrq->disabled = 0; /* Can't be disabled */ |
| |
| /* Note : by default, display the retry number */ |
| if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { |
| rrq->flags = IW_RETRY_LIFETIME; |
| rrq->value = lifetime * 1000; /* ??? */ |
| } else { |
| /* By default, display the min number */ |
| if ((rrq->flags & IW_RETRY_MAX)) { |
| rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; |
| rrq->value = long_limit; |
| } else { |
| rrq->flags = IW_RETRY_LIMIT; |
| rrq->value = short_limit; |
| if(short_limit != long_limit) |
| rrq->flags |= IW_RETRY_MIN; |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = *( (int *) wrq->u.name ); |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->ibss_port = val ; |
| |
| /* Actually update the mode we are using */ |
| set_port_type(priv); |
| |
| orinoco_unlock(priv, &flags); |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int *val = (int *)wrq->u.name; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| *val = priv->ibss_port; |
| orinoco_unlock(priv, &flags); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = *( (int *) wrq->u.name ); |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| switch (val) { |
| case 0: /* Try to do IEEE ad-hoc mode */ |
| if (! priv->has_ibss) { |
| err = -EINVAL; |
| break; |
| } |
| priv->prefer_port3 = 0; |
| |
| break; |
| |
| case 1: /* Try to do Lucent proprietary ad-hoc mode */ |
| if (! priv->has_port3) { |
| err = -EINVAL; |
| break; |
| } |
| priv->prefer_port3 = 1; |
| break; |
| |
| default: |
| err = -EINVAL; |
| } |
| |
| if (! err) |
| /* Actually update the mode we are using */ |
| set_port_type(priv); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int *val = (int *)wrq->u.name; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| *val = priv->prefer_port3; |
| orinoco_unlock(priv, &flags); |
| return 0; |
| } |
| |
| /* Spy is used for link quality/strength measurements in Ad-Hoc mode |
| * Jean II */ |
| static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct sockaddr address[IW_MAX_SPY]; |
| int number = srq->length; |
| int i; |
| int err = 0; |
| unsigned long flags; |
| |
| /* Check the number of addresses */ |
| if (number > IW_MAX_SPY) |
| return -E2BIG; |
| |
| /* Get the data in the driver */ |
| if (srq->pointer) { |
| if (copy_from_user(address, srq->pointer, |
| sizeof(struct sockaddr) * number)) |
| return -EFAULT; |
| } |
| |
| /* Make sure nobody mess with the structure while we do */ |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| /* orinoco_lock() doesn't disable interrupts, so make sure the |
| * interrupt rx path don't get confused while we copy */ |
| priv->spy_number = 0; |
| |
| if (number > 0) { |
| /* Extract the addresses */ |
| for (i = 0; i < number; i++) |
| memcpy(priv->spy_address[i], address[i].sa_data, |
| ETH_ALEN); |
| /* Reset stats */ |
| memset(priv->spy_stat, 0, |
| sizeof(struct iw_quality) * IW_MAX_SPY); |
| /* Set number of addresses */ |
| priv->spy_number = number; |
| } |
| |
| /* Now, let the others play */ |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct sockaddr address[IW_MAX_SPY]; |
| struct iw_quality spy_stat[IW_MAX_SPY]; |
| int number; |
| int i; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| number = priv->spy_number; |
| if ((number > 0) && (srq->pointer)) { |
| /* Create address struct */ |
| for (i = 0; i < number; i++) { |
| memcpy(address[i].sa_data, priv->spy_address[i], |
| ETH_ALEN); |
| address[i].sa_family = AF_UNIX; |
| } |
| /* Copy stats */ |
| /* In theory, we should disable irqs while copying the stats |
| * because the rx path might update it in the middle... |
| * Bah, who care ? - Jean II */ |
| memcpy(&spy_stat, priv->spy_stat, |
| sizeof(struct iw_quality) * IW_MAX_SPY); |
| for (i=0; i < number; i++) |
| priv->spy_stat[i].updated = 0; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| /* Push stuff to user space */ |
| srq->length = number; |
| if(copy_to_user(srq->pointer, address, |
| sizeof(struct sockaddr) * number)) |
| return -EFAULT; |
| if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number), |
| &spy_stat, sizeof(struct iw_quality) * number)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int |
| orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct iwreq *wrq = (struct iwreq *)rq; |
| int err = 0; |
| int tmp; |
| int changed = 0; |
| unsigned long flags; |
| |
| TRACE_ENTER(dev->name); |
| |
| /* In theory, we could allow most of the the SET stuff to be |
| * done. In practice, the lapse of time at startup when the |
| * card is not ready is very short, so why bother... Note |
| * that netif_device_present is different from up/down |
| * (ifconfig), when the device is not yet up, it is usually |
| * already ready... Jean II */ |
| if (! netif_device_present(dev)) |
| return -ENODEV; |
| |
| switch (cmd) { |
| case SIOCGIWNAME: |
| strcpy(wrq->u.name, "IEEE 802.11-DS"); |
| break; |
| |
| case SIOCGIWAP: |
| wrq->u.ap_addr.sa_family = ARPHRD_ETHER; |
| err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data); |
| break; |
| |
| case SIOCGIWRANGE: |
| err = orinoco_ioctl_getiwrange(dev, &wrq->u.data); |
| break; |
| |
| case SIOCSIWMODE: |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| switch (wrq->u.mode) { |
| case IW_MODE_ADHOC: |
| if (! (priv->has_ibss || priv->has_port3) ) |
| err = -EINVAL; |
| else { |
| priv->iw_mode = IW_MODE_ADHOC; |
| changed = 1; |
| } |
| break; |
| |
| case IW_MODE_INFRA: |
| priv->iw_mode = IW_MODE_INFRA; |
| changed = 1; |
| break; |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| set_port_type(priv); |
| orinoco_unlock(priv, &flags); |
| break; |
| |
| case SIOCGIWMODE: |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| wrq->u.mode = priv->iw_mode; |
| orinoco_unlock(priv, &flags); |
| break; |
| |
| case SIOCSIWENCODE: |
| err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWENCODE: |
| if (! capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| |
| err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding); |
| break; |
| |
| case SIOCSIWESSID: |
| err = orinoco_ioctl_setessid(dev, &wrq->u.essid); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWESSID: |
| err = orinoco_ioctl_getessid(dev, &wrq->u.essid); |
| break; |
| |
| case SIOCSIWNICKN: |
| err = orinoco_ioctl_setnick(dev, &wrq->u.data); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWNICKN: |
| err = orinoco_ioctl_getnick(dev, &wrq->u.data); |
| break; |
| |
| case SIOCGIWFREQ: |
| tmp = orinoco_hw_get_freq(priv); |
| if (tmp < 0) { |
| err = tmp; |
| } else { |
| wrq->u.freq.m = tmp; |
| wrq->u.freq.e = 1; |
| } |
| break; |
| |
| case SIOCSIWFREQ: |
| err = orinoco_ioctl_setfreq(dev, &wrq->u.freq); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWSENS: |
| err = orinoco_ioctl_getsens(dev, &wrq->u.sens); |
| break; |
| |
| case SIOCSIWSENS: |
| err = orinoco_ioctl_setsens(dev, &wrq->u.sens); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWRTS: |
| wrq->u.rts.value = priv->rts_thresh; |
| wrq->u.rts.disabled = (wrq->u.rts.value == 2347); |
| wrq->u.rts.fixed = 1; |
| break; |
| |
| case SIOCSIWRTS: |
| err = orinoco_ioctl_setrts(dev, &wrq->u.rts); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCSIWFRAG: |
| err = orinoco_ioctl_setfrag(dev, &wrq->u.frag); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWFRAG: |
| err = orinoco_ioctl_getfrag(dev, &wrq->u.frag); |
| break; |
| |
| case SIOCSIWRATE: |
| err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWRATE: |
| err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate); |
| break; |
| |
| case SIOCSIWPOWER: |
| err = orinoco_ioctl_setpower(dev, &wrq->u.power); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCGIWPOWER: |
| err = orinoco_ioctl_getpower(dev, &wrq->u.power); |
| break; |
| |
| case SIOCGIWTXPOW: |
| /* The card only supports one tx power, so this is easy */ |
| wrq->u.txpower.value = 15; /* dBm */ |
| wrq->u.txpower.fixed = 1; |
| wrq->u.txpower.disabled = 0; |
| wrq->u.txpower.flags = IW_TXPOW_DBM; |
| break; |
| |
| case SIOCSIWRETRY: |
| err = -EOPNOTSUPP; |
| break; |
| |
| case SIOCGIWRETRY: |
| err = orinoco_ioctl_getretry(dev, &wrq->u.retry); |
| break; |
| |
| case SIOCSIWSPY: |
| err = orinoco_ioctl_setspy(dev, &wrq->u.data); |
| break; |
| |
| case SIOCGIWSPY: |
| err = orinoco_ioctl_getspy(dev, &wrq->u.data); |
| break; |
| |
| case SIOCGIWPRIV: |
| if (wrq->u.data.pointer) { |
| struct iw_priv_args privtab[] = { |
| { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, |
| { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, |
| { SIOCIWFIRSTPRIV + 0x2, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_port3" }, |
| { SIOCIWFIRSTPRIV + 0x3, 0, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_port3" }, |
| { SIOCIWFIRSTPRIV + 0x4, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_preamble" }, |
| { SIOCIWFIRSTPRIV + 0x5, 0, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_preamble" }, |
| { SIOCIWFIRSTPRIV + 0x6, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_ibssport" }, |
| { SIOCIWFIRSTPRIV + 0x7, 0, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_ibssport" }, |
| { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, |
| }; |
| |
| wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); |
| if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab))) |
| err = -EFAULT; |
| } |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x0: /* force_reset */ |
| case SIOCIWFIRSTPRIV + 0x1: /* card_reset */ |
| if (! capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| |
| printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); |
| |
| schedule_work(&priv->reset_work); |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */ |
| if (! capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| |
| err = orinoco_ioctl_setport3(dev, wrq); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */ |
| err = orinoco_ioctl_getport3(dev, wrq); |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */ |
| if (! capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| |
| /* 802.11b has recently defined some short preamble. |
| * Basically, the Phy header has been reduced in size. |
| * This increase performance, especially at high rates |
| * (the preamble is transmitted at 1Mb/s), unfortunately |
| * this give compatibility troubles... - Jean II */ |
| if(priv->has_preamble) { |
| int val = *( (int *) wrq->u.name ); |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| if (val) |
| priv->preamble = 1; |
| else |
| priv->preamble = 0; |
| orinoco_unlock(priv, &flags); |
| changed = 1; |
| } else |
| err = -EOPNOTSUPP; |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */ |
| if(priv->has_preamble) { |
| int *val = (int *)wrq->u.name; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| *val = priv->preamble; |
| orinoco_unlock(priv, &flags); |
| } else |
| err = -EOPNOTSUPP; |
| break; |
| case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */ |
| if (! capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| |
| err = orinoco_ioctl_setibssport(dev, wrq); |
| if (! err) |
| changed = 1; |
| break; |
| |
| case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */ |
| err = orinoco_ioctl_getibssport(dev, wrq); |
| break; |
| |
| case SIOCIWLASTPRIV: |
| err = orinoco_debug_dump_recs(dev); |
| if (err) |
| printk(KERN_ERR "%s: Unable to dump records (%d)\n", |
| dev->name, err); |
| break; |
| |
| |
| default: |
| err = -EOPNOTSUPP; |
| } |
| |
| if (! err && changed && netif_running(dev)) { |
| err = orinoco_reconfigure(dev); |
| } |
| |
| TRACE_EXIT(dev->name); |
| |
| return err; |
| } |
| |
| struct { |
| u16 rid; |
| char *name; |
| int displaytype; |
| #define DISPLAY_WORDS 0 |
| #define DISPLAY_BYTES 1 |
| #define DISPLAY_STRING 2 |
| #define DISPLAY_XSTRING 3 |
| } record_table[] = { |
| #define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } |
| DEBUG_REC(CNFPORTTYPE,WORDS), |
| DEBUG_REC(CNFOWNMACADDR,BYTES), |
| DEBUG_REC(CNFDESIREDSSID,STRING), |
| DEBUG_REC(CNFOWNCHANNEL,WORDS), |
| DEBUG_REC(CNFOWNSSID,STRING), |
| DEBUG_REC(CNFOWNATIMWINDOW,WORDS), |
| DEBUG_REC(CNFSYSTEMSCALE,WORDS), |
| DEBUG_REC(CNFMAXDATALEN,WORDS), |
| DEBUG_REC(CNFPMENABLED,WORDS), |
| DEBUG_REC(CNFPMEPS,WORDS), |
| DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), |
| DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), |
| DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), |
| DEBUG_REC(CNFOWNNAME,STRING), |
| DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), |
| DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), |
| DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), |
| DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), |
| DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), |
| DEBUG_REC(CNFDEFAULTKEY0,BYTES), |
| DEBUG_REC(CNFDEFAULTKEY1,BYTES), |
| DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), |
| DEBUG_REC(CNFDEFAULTKEY2,BYTES), |
| DEBUG_REC(CNFDEFAULTKEY3,BYTES), |
| DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), |
| DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), |
| DEBUG_REC(CNFAUTHENTICATION,WORDS), |
| DEBUG_REC(CNFMAXASSOCSTA,WORDS), |
| DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), |
| DEBUG_REC(CNFTXCONTROL,WORDS), |
| DEBUG_REC(CNFROAMINGMODE,WORDS), |
| DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), |
| DEBUG_REC(CNFRCVCRCERROR,WORDS), |
| DEBUG_REC(CNFMMLIFE,WORDS), |
| DEBUG_REC(CNFALTRETRYCOUNT,WORDS), |
| DEBUG_REC(CNFBEACONINT,WORDS), |
| DEBUG_REC(CNFAPPCFINFO,WORDS), |
| DEBUG_REC(CNFSTAPCFINFO,WORDS), |
| DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), |
| DEBUG_REC(CNFTIMCTRL,WORDS), |
| DEBUG_REC(CNFTHIRTY2TALLY,WORDS), |
| DEBUG_REC(CNFENHSECURITY,WORDS), |
| DEBUG_REC(CNFGROUPADDRESSES,BYTES), |
| DEBUG_REC(CNFCREATEIBSS,WORDS), |
| DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), |
| DEBUG_REC(CNFRTSTHRESHOLD,WORDS), |
| DEBUG_REC(CNFTXRATECONTROL,WORDS), |
| DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), |
| DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), |
| DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), |
| DEBUG_REC(CNFSHORTPREAMBLE,WORDS), |
| DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), |
| DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), |
| DEBUG_REC(CNFTXKEY_AGERE,WORDS), |
| DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), |
| DEBUG_REC(CNFBASICRATES,WORDS), |
| DEBUG_REC(CNFSUPPORTEDRATES,WORDS), |
| DEBUG_REC(CNFTICKTIME,WORDS), |
| DEBUG_REC(CNFSCANREQUEST,WORDS), |
| DEBUG_REC(CNFJOINREQUEST,WORDS), |
| DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), |
| DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), |
| DEBUG_REC(MAXLOADTIME,WORDS), |
| DEBUG_REC(DOWNLOADBUFFER,WORDS), |
| DEBUG_REC(PRIID,WORDS), |
| DEBUG_REC(PRISUPRANGE,WORDS), |
| DEBUG_REC(CFIACTRANGES,WORDS), |
| DEBUG_REC(NICSERNUM,XSTRING), |
| DEBUG_REC(NICID,WORDS), |
| DEBUG_REC(MFISUPRANGE,WORDS), |
| DEBUG_REC(CFISUPRANGE,WORDS), |
| DEBUG_REC(CHANNELLIST,WORDS), |
| DEBUG_REC(REGULATORYDOMAINS,WORDS), |
| DEBUG_REC(TEMPTYPE,WORDS), |
| /* DEBUG_REC(CIS,BYTES), */ |
| DEBUG_REC(STAID,WORDS), |
| DEBUG_REC(CURRENTSSID,STRING), |
| DEBUG_REC(CURRENTBSSID,BYTES), |
| DEBUG_REC(COMMSQUALITY,WORDS), |
| DEBUG_REC(CURRENTTXRATE,WORDS), |
| DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), |
| DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), |
| DEBUG_REC(PROTOCOLRSPTIME,WORDS), |
| DEBUG_REC(SHORTRETRYLIMIT,WORDS), |
| DEBUG_REC(LONGRETRYLIMIT,WORDS), |
| DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), |
| DEBUG_REC(MAXRECEIVELIFETIME,WORDS), |
| DEBUG_REC(CFPOLLABLE,WORDS), |
| DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), |
| DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), |
| DEBUG_REC(OWNMACADDR,BYTES), |
| DEBUG_REC(SCANRESULTSTABLE,WORDS), |
| DEBUG_REC(PHYTYPE,WORDS), |
| DEBUG_REC(CURRENTCHANNEL,WORDS), |
| DEBUG_REC(CURRENTPOWERSTATE,WORDS), |
| DEBUG_REC(CCAMODE,WORDS), |
| DEBUG_REC(SUPPORTEDDATARATES,WORDS), |
| DEBUG_REC(BUILDSEQ,BYTES), |
| DEBUG_REC(FWID,XSTRING) |
| #undef DEBUG_REC |
| }; |
| |
| #define DEBUG_LTV_SIZE 128 |
| |
| static int orinoco_debug_dump_recs(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| u8 *val8; |
| u16 *val16; |
| int i,j; |
| u16 length; |
| int err; |
| |
| /* I'm not sure: we might have a lock here, so we'd better go |
| atomic, just in case. */ |
| val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); |
| if (! val8) |
| return -ENOMEM; |
| val16 = (u16 *)val8; |
| |
| for (i = 0; i < ARRAY_SIZE(record_table); i++) { |
| u16 rid = record_table[i].rid; |
| int len; |
| |
| memset(val8, 0, DEBUG_LTV_SIZE + 2); |
| |
| err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, |
| &length, val8); |
| if (err) { |
| DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); |
| continue; |
| } |
| val16 = (u16 *)val8; |
| if (length == 0) |
| continue; |
| |
| printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", |
| record_table[i].name, |
| rid, length, (length-1)*2); |
| len = min(((int)length-1)*2, DEBUG_LTV_SIZE); |
| |
| switch (record_table[i].displaytype) { |
| case DISPLAY_WORDS: |
| for (j = 0; j < len / 2; j++) |
| printk("%04X-", le16_to_cpu(val16[j])); |
| break; |
| |
| case DISPLAY_BYTES: |
| default: |
| for (j = 0; j < len; j++) |
| printk("%02X:", val8[j]); |
| break; |
| |
| case DISPLAY_STRING: |
| len = min(len, le16_to_cpu(val16[0])+2); |
| val8[len] = '\0'; |
| printk("\"%s\"", (char *)&val16[1]); |
| break; |
| |
| case DISPLAY_XSTRING: |
| printk("'%s'", (char *)val8); |
| } |
| |
| printk("\n"); |
| } |
| |
| kfree(val8); |
| |
| return 0; |
| } |
| |
| /********************************************************************/ |
| /* Debugging */ |
| /********************************************************************/ |
| |
| #if 0 |
| static void show_rx_frame(struct orinoco_rxframe_hdr *frame) |
| { |
| printk(KERN_DEBUG "RX descriptor:\n"); |
| printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status); |
| printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time); |
| printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence); |
| printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal); |
| printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate); |
| printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow); |
| printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved); |
| |
| printk(KERN_DEBUG "IEEE 802.11 header:\n"); |
| printk(KERN_DEBUG " frame_ctl = 0x%04x\n", |
| frame->p80211.frame_ctl); |
| printk(KERN_DEBUG " duration_id = 0x%04x\n", |
| frame->p80211.duration_id); |
| printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p80211.addr1[0], frame->p80211.addr1[1], |
| frame->p80211.addr1[2], frame->p80211.addr1[3], |
| frame->p80211.addr1[4], frame->p80211.addr1[5]); |
| printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p80211.addr2[0], frame->p80211.addr2[1], |
| frame->p80211.addr2[2], frame->p80211.addr2[3], |
| frame->p80211.addr2[4], frame->p80211.addr2[5]); |
| printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p80211.addr3[0], frame->p80211.addr3[1], |
| frame->p80211.addr3[2], frame->p80211.addr3[3], |
| frame->p80211.addr3[4], frame->p80211.addr3[5]); |
| printk(KERN_DEBUG " seq_ctl = 0x%04x\n", |
| frame->p80211.seq_ctl); |
| printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p80211.addr4[0], frame->p80211.addr4[1], |
| frame->p80211.addr4[2], frame->p80211.addr4[3], |
| frame->p80211.addr4[4], frame->p80211.addr4[5]); |
| printk(KERN_DEBUG " data_len = 0x%04x\n", |
| frame->p80211.data_len); |
| |
| printk(KERN_DEBUG "IEEE 802.3 header:\n"); |
| printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p8023.h_dest[0], frame->p8023.h_dest[1], |
| frame->p8023.h_dest[2], frame->p8023.h_dest[3], |
| frame->p8023.h_dest[4], frame->p8023.h_dest[5]); |
| printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n", |
| frame->p8023.h_source[0], frame->p8023.h_source[1], |
| frame->p8023.h_source[2], frame->p8023.h_source[3], |
| frame->p8023.h_source[4], frame->p8023.h_source[5]); |
| printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto); |
| |
| printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n"); |
| printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap); |
| printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap); |
| printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl); |
| printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n", |
| frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]); |
| printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype); |
| } |
| #endif /* 0 */ |
| |
| /********************************************************************/ |
| /* Module initialization */ |
| /********************************************************************/ |
| |
| EXPORT_SYMBOL(alloc_orinocodev); |
| EXPORT_SYMBOL(free_orinocodev); |
| |
| EXPORT_SYMBOL(__orinoco_up); |
| EXPORT_SYMBOL(__orinoco_down); |
| EXPORT_SYMBOL(orinoco_stop); |
| EXPORT_SYMBOL(orinoco_reinit_firmware); |
| |
| EXPORT_SYMBOL(orinoco_interrupt); |
| |
| /* Can't be declared "const" or the whole __initdata section will |
| * become const */ |
| static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| " (David Gibson <hermes@gibson.dropbear.id.au>, " |
| "Pavel Roskin <proski@gnu.org>, et al)"; |
| |
| static int __init init_orinoco(void) |
| { |
| printk(KERN_DEBUG "%s\n", version); |
| return 0; |
| } |
| |
| static void __exit exit_orinoco(void) |
| { |
| } |
| |
| module_init(init_orinoco); |
| module_exit(exit_orinoco); |
