| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * This module provides an interface to trigger and test firmware loading. | 
 |  * | 
 |  * It is designed to be used for basic evaluation of the firmware loading | 
 |  * subsystem (for example when validating firmware verification). It lacks | 
 |  * any extra dependencies, and will not normally be loaded by the system | 
 |  * unless explicitly requested by name. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/printk.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/device.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/sizes.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/vmalloc.h> | 
 | #include <linux/efi_embedded_fw.h> | 
 |  | 
 | #define TEST_FIRMWARE_NAME	"test-firmware.bin" | 
 | #define TEST_FIRMWARE_NUM_REQS	4 | 
 | #define TEST_FIRMWARE_BUF_SIZE	SZ_1K | 
 |  | 
 | static DEFINE_MUTEX(test_fw_mutex); | 
 | static const struct firmware *test_firmware; | 
 |  | 
 | struct test_batched_req { | 
 | 	u8 idx; | 
 | 	int rc; | 
 | 	bool sent; | 
 | 	const struct firmware *fw; | 
 | 	const char *name; | 
 | 	struct completion completion; | 
 | 	struct task_struct *task; | 
 | 	struct device *dev; | 
 | }; | 
 |  | 
 | /** | 
 |  * test_config - represents configuration for the test for different triggers | 
 |  * | 
 |  * @name: the name of the firmware file to look for | 
 |  * @into_buf: when the into_buf is used if this is true | 
 |  *	request_firmware_into_buf() will be used instead. | 
 |  * @sync_direct: when the sync trigger is used if this is true | 
 |  *	request_firmware_direct() will be used instead. | 
 |  * @send_uevent: whether or not to send a uevent for async requests | 
 |  * @num_requests: number of requests to try per test case. This is trigger | 
 |  *	specific. | 
 |  * @reqs: stores all requests information | 
 |  * @read_fw_idx: index of thread from which we want to read firmware results | 
 |  *	from through the read_fw trigger. | 
 |  * @test_result: a test may use this to collect the result from the call | 
 |  *	of the request_firmware*() calls used in their tests. In order of | 
 |  *	priority we always keep first any setup error. If no setup errors were | 
 |  *	found then we move on to the first error encountered while running the | 
 |  *	API. Note that for async calls this typically will be a successful | 
 |  *	result (0) unless of course you've used bogus parameters, or the system | 
 |  *	is out of memory.  In the async case the callback is expected to do a | 
 |  *	bit more homework to figure out what happened, unfortunately the only | 
 |  *	information passed today on error is the fact that no firmware was | 
 |  *	found so we can only assume -ENOENT on async calls if the firmware is | 
 |  *	NULL. | 
 |  * | 
 |  *	Errors you can expect: | 
 |  * | 
 |  *	API specific: | 
 |  * | 
 |  *	0:		success for sync, for async it means request was sent | 
 |  *	-EINVAL:	invalid parameters or request | 
 |  *	-ENOENT:	files not found | 
 |  * | 
 |  *	System environment: | 
 |  * | 
 |  *	-ENOMEM:	memory pressure on system | 
 |  *	-ENODEV:	out of number of devices to test | 
 |  *	-EINVAL:	an unexpected error has occurred | 
 |  * @req_firmware: if @sync_direct is true this is set to | 
 |  *	request_firmware_direct(), otherwise request_firmware() | 
 |  */ | 
 | struct test_config { | 
 | 	char *name; | 
 | 	bool into_buf; | 
 | 	bool sync_direct; | 
 | 	bool send_uevent; | 
 | 	u8 num_requests; | 
 | 	u8 read_fw_idx; | 
 |  | 
 | 	/* | 
 | 	 * These below don't belong her but we'll move them once we create | 
 | 	 * a struct fw_test_device and stuff the misc_dev under there later. | 
 | 	 */ | 
 | 	struct test_batched_req *reqs; | 
 | 	int test_result; | 
 | 	int (*req_firmware)(const struct firmware **fw, const char *name, | 
 | 			    struct device *device); | 
 | }; | 
 |  | 
 | static struct test_config *test_fw_config; | 
 |  | 
 | static ssize_t test_fw_misc_read(struct file *f, char __user *buf, | 
 | 				 size_t size, loff_t *offset) | 
 | { | 
 | 	ssize_t rc = 0; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	if (test_firmware) | 
 | 		rc = simple_read_from_buffer(buf, size, offset, | 
 | 					     test_firmware->data, | 
 | 					     test_firmware->size); | 
 | 	mutex_unlock(&test_fw_mutex); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static const struct file_operations test_fw_fops = { | 
 | 	.owner          = THIS_MODULE, | 
 | 	.read           = test_fw_misc_read, | 
 | }; | 
 |  | 
 | static void __test_release_all_firmware(void) | 
 | { | 
 | 	struct test_batched_req *req; | 
 | 	u8 i; | 
 |  | 
 | 	if (!test_fw_config->reqs) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i < test_fw_config->num_requests; i++) { | 
 | 		req = &test_fw_config->reqs[i]; | 
 | 		if (req->fw) | 
 | 			release_firmware(req->fw); | 
 | 	} | 
 |  | 
 | 	vfree(test_fw_config->reqs); | 
 | 	test_fw_config->reqs = NULL; | 
 | } | 
 |  | 
 | static void test_release_all_firmware(void) | 
 | { | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	__test_release_all_firmware(); | 
 | 	mutex_unlock(&test_fw_mutex); | 
 | } | 
 |  | 
 |  | 
 | static void __test_firmware_config_free(void) | 
 | { | 
 | 	__test_release_all_firmware(); | 
 | 	kfree_const(test_fw_config->name); | 
 | 	test_fw_config->name = NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * XXX: move to kstrncpy() once merged. | 
 |  * | 
 |  * Users should use kfree_const() when freeing these. | 
 |  */ | 
 | static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp) | 
 | { | 
 | 	*dst = kstrndup(name, count, gfp); | 
 | 	if (!*dst) | 
 | 		return -ENOSPC; | 
 | 	return count; | 
 | } | 
 |  | 
 | static int __test_firmware_config_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = __kstrncpy(&test_fw_config->name, TEST_FIRMWARE_NAME, | 
 | 			 strlen(TEST_FIRMWARE_NAME), GFP_KERNEL); | 
 | 	if (ret < 0) | 
 | 		goto out; | 
 |  | 
 | 	test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS; | 
 | 	test_fw_config->send_uevent = true; | 
 | 	test_fw_config->into_buf = false; | 
 | 	test_fw_config->sync_direct = false; | 
 | 	test_fw_config->req_firmware = request_firmware; | 
 | 	test_fw_config->test_result = 0; | 
 | 	test_fw_config->reqs = NULL; | 
 |  | 
 | 	return 0; | 
 |  | 
 | out: | 
 | 	__test_firmware_config_free(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t reset_store(struct device *dev, | 
 | 			   struct device_attribute *attr, | 
 | 			   const char *buf, size_t count) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 |  | 
 | 	__test_firmware_config_free(); | 
 |  | 
 | 	ret = __test_firmware_config_init(); | 
 | 	if (ret < 0) { | 
 | 		ret = -ENOMEM; | 
 | 		pr_err("could not alloc settings for config trigger: %d\n", | 
 | 		       ret); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	pr_info("reset\n"); | 
 | 	ret = count; | 
 |  | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 | static DEVICE_ATTR_WO(reset); | 
 |  | 
 | static ssize_t config_show(struct device *dev, | 
 | 			   struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	int len = 0; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 |  | 
 | 	len += scnprintf(buf, PAGE_SIZE - len, | 
 | 			"Custom trigger configuration for: %s\n", | 
 | 			dev_name(dev)); | 
 |  | 
 | 	if (test_fw_config->name) | 
 | 		len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 				"name:\t%s\n", | 
 | 				test_fw_config->name); | 
 | 	else | 
 | 		len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 				"name:\tEMTPY\n"); | 
 |  | 
 | 	len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 			"num_requests:\t%u\n", test_fw_config->num_requests); | 
 |  | 
 | 	len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 			"send_uevent:\t\t%s\n", | 
 | 			test_fw_config->send_uevent ? | 
 | 			"FW_ACTION_HOTPLUG" : | 
 | 			"FW_ACTION_NOHOTPLUG"); | 
 | 	len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 			"into_buf:\t\t%s\n", | 
 | 			test_fw_config->into_buf ? "true" : "false"); | 
 | 	len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 			"sync_direct:\t\t%s\n", | 
 | 			test_fw_config->sync_direct ? "true" : "false"); | 
 | 	len += scnprintf(buf+len, PAGE_SIZE - len, | 
 | 			"read_fw_idx:\t%u\n", test_fw_config->read_fw_idx); | 
 |  | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return len; | 
 | } | 
 | static DEVICE_ATTR_RO(config); | 
 |  | 
 | static ssize_t config_name_store(struct device *dev, | 
 | 				 struct device_attribute *attr, | 
 | 				 const char *buf, size_t count) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	kfree_const(test_fw_config->name); | 
 | 	ret = __kstrncpy(&test_fw_config->name, buf, count, GFP_KERNEL); | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE. | 
 |  */ | 
 | static ssize_t config_test_show_str(char *dst, | 
 | 				    char *src) | 
 | { | 
 | 	int len; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	len = snprintf(dst, PAGE_SIZE, "%s\n", src); | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static int test_dev_config_update_bool(const char *buf, size_t size, | 
 | 				       bool *cfg) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	if (strtobool(buf, cfg) < 0) | 
 | 		ret = -EINVAL; | 
 | 	else | 
 | 		ret = size; | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t test_dev_config_show_bool(char *buf, bool val) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%d\n", val); | 
 | } | 
 |  | 
 | static ssize_t test_dev_config_show_int(char *buf, int val) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%d\n", val); | 
 | } | 
 |  | 
 | static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) | 
 | { | 
 | 	int ret; | 
 | 	long new; | 
 |  | 
 | 	ret = kstrtol(buf, 10, &new); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (new > U8_MAX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	*(u8 *)cfg = new; | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	/* Always return full write size even if we didn't consume all */ | 
 | 	return size; | 
 | } | 
 |  | 
 | static ssize_t test_dev_config_show_u8(char *buf, u8 val) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%u\n", val); | 
 | } | 
 |  | 
 | static ssize_t config_name_show(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	return config_test_show_str(buf, test_fw_config->name); | 
 | } | 
 | static DEVICE_ATTR_RW(config_name); | 
 |  | 
 | static ssize_t config_num_requests_store(struct device *dev, | 
 | 					 struct device_attribute *attr, | 
 | 					 const char *buf, size_t count) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	if (test_fw_config->reqs) { | 
 | 		pr_err("Must call release_all_firmware prior to changing config\n"); | 
 | 		rc = -EINVAL; | 
 | 		mutex_unlock(&test_fw_mutex); | 
 | 		goto out; | 
 | 	} | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	rc = test_dev_config_update_u8(buf, count, | 
 | 				       &test_fw_config->num_requests); | 
 |  | 
 | out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | static ssize_t config_num_requests_show(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					char *buf) | 
 | { | 
 | 	return test_dev_config_show_u8(buf, test_fw_config->num_requests); | 
 | } | 
 | static DEVICE_ATTR_RW(config_num_requests); | 
 |  | 
 | static ssize_t config_into_buf_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	return test_dev_config_update_bool(buf, | 
 | 					   count, | 
 | 					   &test_fw_config->into_buf); | 
 | } | 
 |  | 
 | static ssize_t config_into_buf_show(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    char *buf) | 
 | { | 
 | 	return test_dev_config_show_bool(buf, test_fw_config->into_buf); | 
 | } | 
 | static DEVICE_ATTR_RW(config_into_buf); | 
 |  | 
 | static ssize_t config_sync_direct_store(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char *buf, size_t count) | 
 | { | 
 | 	int rc = test_dev_config_update_bool(buf, count, | 
 | 					     &test_fw_config->sync_direct); | 
 |  | 
 | 	if (rc == count) | 
 | 		test_fw_config->req_firmware = test_fw_config->sync_direct ? | 
 | 				       request_firmware_direct : | 
 | 				       request_firmware; | 
 | 	return rc; | 
 | } | 
 |  | 
 | static ssize_t config_sync_direct_show(struct device *dev, | 
 | 				       struct device_attribute *attr, | 
 | 				       char *buf) | 
 | { | 
 | 	return test_dev_config_show_bool(buf, test_fw_config->sync_direct); | 
 | } | 
 | static DEVICE_ATTR_RW(config_sync_direct); | 
 |  | 
 | static ssize_t config_send_uevent_store(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char *buf, size_t count) | 
 | { | 
 | 	return test_dev_config_update_bool(buf, count, | 
 | 					   &test_fw_config->send_uevent); | 
 | } | 
 |  | 
 | static ssize_t config_send_uevent_show(struct device *dev, | 
 | 				       struct device_attribute *attr, | 
 | 				       char *buf) | 
 | { | 
 | 	return test_dev_config_show_bool(buf, test_fw_config->send_uevent); | 
 | } | 
 | static DEVICE_ATTR_RW(config_send_uevent); | 
 |  | 
 | static ssize_t config_read_fw_idx_store(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char *buf, size_t count) | 
 | { | 
 | 	return test_dev_config_update_u8(buf, count, | 
 | 					 &test_fw_config->read_fw_idx); | 
 | } | 
 |  | 
 | static ssize_t config_read_fw_idx_show(struct device *dev, | 
 | 				       struct device_attribute *attr, | 
 | 				       char *buf) | 
 | { | 
 | 	return test_dev_config_show_u8(buf, test_fw_config->read_fw_idx); | 
 | } | 
 | static DEVICE_ATTR_RW(config_read_fw_idx); | 
 |  | 
 |  | 
 | static ssize_t trigger_request_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	int rc; | 
 | 	char *name; | 
 |  | 
 | 	name = kstrndup(buf, count, GFP_KERNEL); | 
 | 	if (!name) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	pr_info("loading '%s'\n", name); | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	release_firmware(test_firmware); | 
 | 	test_firmware = NULL; | 
 | 	rc = request_firmware(&test_firmware, name, dev); | 
 | 	if (rc) { | 
 | 		pr_info("load of '%s' failed: %d\n", name, rc); | 
 | 		goto out; | 
 | 	} | 
 | 	pr_info("loaded: %zu\n", test_firmware->size); | 
 | 	rc = count; | 
 |  | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	kfree(name); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_request); | 
 |  | 
 | #ifdef CONFIG_EFI_EMBEDDED_FIRMWARE | 
 | static ssize_t trigger_request_platform_store(struct device *dev, | 
 | 					      struct device_attribute *attr, | 
 | 					      const char *buf, size_t count) | 
 | { | 
 | 	static const u8 test_data[] = { | 
 | 		0x55, 0xaa, 0x55, 0xaa, 0x01, 0x02, 0x03, 0x04, | 
 | 		0x55, 0xaa, 0x55, 0xaa, 0x05, 0x06, 0x07, 0x08, | 
 | 		0x55, 0xaa, 0x55, 0xaa, 0x10, 0x20, 0x30, 0x40, | 
 | 		0x55, 0xaa, 0x55, 0xaa, 0x50, 0x60, 0x70, 0x80 | 
 | 	}; | 
 | 	struct efi_embedded_fw efi_embedded_fw; | 
 | 	const struct firmware *firmware = NULL; | 
 | 	char *name; | 
 | 	int rc; | 
 |  | 
 | 	name = kstrndup(buf, count, GFP_KERNEL); | 
 | 	if (!name) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	pr_info("inserting test platform fw '%s'\n", name); | 
 | 	efi_embedded_fw.name = name; | 
 | 	efi_embedded_fw.data = (void *)test_data; | 
 | 	efi_embedded_fw.length = sizeof(test_data); | 
 | 	list_add(&efi_embedded_fw.list, &efi_embedded_fw_list); | 
 |  | 
 | 	pr_info("loading '%s'\n", name); | 
 | 	rc = firmware_request_platform(&firmware, name, dev); | 
 | 	if (rc) { | 
 | 		pr_info("load of '%s' failed: %d\n", name, rc); | 
 | 		goto out; | 
 | 	} | 
 | 	if (firmware->size != sizeof(test_data) || | 
 | 	    memcmp(firmware->data, test_data, sizeof(test_data)) != 0) { | 
 | 		pr_info("firmware contents mismatch for '%s'\n", name); | 
 | 		rc = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 | 	pr_info("loaded: %zu\n", firmware->size); | 
 | 	rc = count; | 
 |  | 
 | out: | 
 | 	release_firmware(firmware); | 
 | 	list_del(&efi_embedded_fw.list); | 
 | 	kfree(name); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_request_platform); | 
 | #endif | 
 |  | 
 | static DECLARE_COMPLETION(async_fw_done); | 
 |  | 
 | static void trigger_async_request_cb(const struct firmware *fw, void *context) | 
 | { | 
 | 	test_firmware = fw; | 
 | 	complete(&async_fw_done); | 
 | } | 
 |  | 
 | static ssize_t trigger_async_request_store(struct device *dev, | 
 | 					   struct device_attribute *attr, | 
 | 					   const char *buf, size_t count) | 
 | { | 
 | 	int rc; | 
 | 	char *name; | 
 |  | 
 | 	name = kstrndup(buf, count, GFP_KERNEL); | 
 | 	if (!name) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	pr_info("loading '%s'\n", name); | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	release_firmware(test_firmware); | 
 | 	test_firmware = NULL; | 
 | 	rc = request_firmware_nowait(THIS_MODULE, 1, name, dev, GFP_KERNEL, | 
 | 				     NULL, trigger_async_request_cb); | 
 | 	if (rc) { | 
 | 		pr_info("async load of '%s' failed: %d\n", name, rc); | 
 | 		kfree(name); | 
 | 		goto out; | 
 | 	} | 
 | 	/* Free 'name' ASAP, to test for race conditions */ | 
 | 	kfree(name); | 
 |  | 
 | 	wait_for_completion(&async_fw_done); | 
 |  | 
 | 	if (test_firmware) { | 
 | 		pr_info("loaded: %zu\n", test_firmware->size); | 
 | 		rc = count; | 
 | 	} else { | 
 | 		pr_err("failed to async load firmware\n"); | 
 | 		rc = -ENOMEM; | 
 | 	} | 
 |  | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_async_request); | 
 |  | 
 | static ssize_t trigger_custom_fallback_store(struct device *dev, | 
 | 					     struct device_attribute *attr, | 
 | 					     const char *buf, size_t count) | 
 | { | 
 | 	int rc; | 
 | 	char *name; | 
 |  | 
 | 	name = kstrndup(buf, count, GFP_KERNEL); | 
 | 	if (!name) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	pr_info("loading '%s' using custom fallback mechanism\n", name); | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	release_firmware(test_firmware); | 
 | 	test_firmware = NULL; | 
 | 	rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG, name, | 
 | 				     dev, GFP_KERNEL, NULL, | 
 | 				     trigger_async_request_cb); | 
 | 	if (rc) { | 
 | 		pr_info("async load of '%s' failed: %d\n", name, rc); | 
 | 		kfree(name); | 
 | 		goto out; | 
 | 	} | 
 | 	/* Free 'name' ASAP, to test for race conditions */ | 
 | 	kfree(name); | 
 |  | 
 | 	wait_for_completion(&async_fw_done); | 
 |  | 
 | 	if (test_firmware) { | 
 | 		pr_info("loaded: %zu\n", test_firmware->size); | 
 | 		rc = count; | 
 | 	} else { | 
 | 		pr_err("failed to async load firmware\n"); | 
 | 		rc = -ENODEV; | 
 | 	} | 
 |  | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_custom_fallback); | 
 |  | 
 | static int test_fw_run_batch_request(void *data) | 
 | { | 
 | 	struct test_batched_req *req = data; | 
 |  | 
 | 	if (!req) { | 
 | 		test_fw_config->test_result = -EINVAL; | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (test_fw_config->into_buf) { | 
 | 		void *test_buf; | 
 |  | 
 | 		test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL); | 
 | 		if (!test_buf) | 
 | 			return -ENOSPC; | 
 |  | 
 | 		req->rc = request_firmware_into_buf(&req->fw, | 
 | 						    req->name, | 
 | 						    req->dev, | 
 | 						    test_buf, | 
 | 						    TEST_FIRMWARE_BUF_SIZE); | 
 | 		if (!req->fw) | 
 | 			kfree(test_buf); | 
 | 	} else { | 
 | 		req->rc = test_fw_config->req_firmware(&req->fw, | 
 | 						       req->name, | 
 | 						       req->dev); | 
 | 	} | 
 |  | 
 | 	if (req->rc) { | 
 | 		pr_info("#%u: batched sync load failed: %d\n", | 
 | 			req->idx, req->rc); | 
 | 		if (!test_fw_config->test_result) | 
 | 			test_fw_config->test_result = req->rc; | 
 | 	} else if (req->fw) { | 
 | 		req->sent = true; | 
 | 		pr_info("#%u: batched sync loaded %zu\n", | 
 | 			req->idx, req->fw->size); | 
 | 	} | 
 | 	complete(&req->completion); | 
 |  | 
 | 	req->task = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * We use a kthread as otherwise the kernel serializes all our sync requests | 
 |  * and we would not be able to mimic batched requests on a sync call. Batched | 
 |  * requests on a sync call can for instance happen on a device driver when | 
 |  * multiple cards are used and firmware loading happens outside of probe. | 
 |  */ | 
 | static ssize_t trigger_batched_requests_store(struct device *dev, | 
 | 					      struct device_attribute *attr, | 
 | 					      const char *buf, size_t count) | 
 | { | 
 | 	struct test_batched_req *req; | 
 | 	int rc; | 
 | 	u8 i; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 |  | 
 | 	test_fw_config->reqs = | 
 | 		vzalloc(array3_size(sizeof(struct test_batched_req), | 
 | 				    test_fw_config->num_requests, 2)); | 
 | 	if (!test_fw_config->reqs) { | 
 | 		rc = -ENOMEM; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	pr_info("batched sync firmware loading '%s' %u times\n", | 
 | 		test_fw_config->name, test_fw_config->num_requests); | 
 |  | 
 | 	for (i = 0; i < test_fw_config->num_requests; i++) { | 
 | 		req = &test_fw_config->reqs[i]; | 
 | 		req->fw = NULL; | 
 | 		req->idx = i; | 
 | 		req->name = test_fw_config->name; | 
 | 		req->dev = dev; | 
 | 		init_completion(&req->completion); | 
 | 		req->task = kthread_run(test_fw_run_batch_request, req, | 
 | 					     "%s-%u", KBUILD_MODNAME, req->idx); | 
 | 		if (!req->task || IS_ERR(req->task)) { | 
 | 			pr_err("Setting up thread %u failed\n", req->idx); | 
 | 			req->task = NULL; | 
 | 			rc = -ENOMEM; | 
 | 			goto out_bail; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rc = count; | 
 |  | 
 | 	/* | 
 | 	 * We require an explicit release to enable more time and delay of | 
 | 	 * calling release_firmware() to improve our chances of forcing a | 
 | 	 * batched request. If we instead called release_firmware() right away | 
 | 	 * then we might miss on an opportunity of having a successful firmware | 
 | 	 * request pass on the opportunity to be come a batched request. | 
 | 	 */ | 
 |  | 
 | out_bail: | 
 | 	for (i = 0; i < test_fw_config->num_requests; i++) { | 
 | 		req = &test_fw_config->reqs[i]; | 
 | 		if (req->task || req->sent) | 
 | 			wait_for_completion(&req->completion); | 
 | 	} | 
 |  | 
 | 	/* Override any worker error if we had a general setup error */ | 
 | 	if (rc < 0) | 
 | 		test_fw_config->test_result = rc; | 
 |  | 
 | out_unlock: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_batched_requests); | 
 |  | 
 | /* | 
 |  * We wait for each callback to return with the lock held, no need to lock here | 
 |  */ | 
 | static void trigger_batched_cb(const struct firmware *fw, void *context) | 
 | { | 
 | 	struct test_batched_req *req = context; | 
 |  | 
 | 	if (!req) { | 
 | 		test_fw_config->test_result = -EINVAL; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* forces *some* batched requests to queue up */ | 
 | 	if (!req->idx) | 
 | 		ssleep(2); | 
 |  | 
 | 	req->fw = fw; | 
 |  | 
 | 	/* | 
 | 	 * Unfortunately the firmware API gives us nothing other than a null FW | 
 | 	 * if the firmware was not found on async requests.  Best we can do is | 
 | 	 * just assume -ENOENT. A better API would pass the actual return | 
 | 	 * value to the callback. | 
 | 	 */ | 
 | 	if (!fw && !test_fw_config->test_result) | 
 | 		test_fw_config->test_result = -ENOENT; | 
 |  | 
 | 	complete(&req->completion); | 
 | } | 
 |  | 
 | static | 
 | ssize_t trigger_batched_requests_async_store(struct device *dev, | 
 | 					     struct device_attribute *attr, | 
 | 					     const char *buf, size_t count) | 
 | { | 
 | 	struct test_batched_req *req; | 
 | 	bool send_uevent; | 
 | 	int rc; | 
 | 	u8 i; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 |  | 
 | 	test_fw_config->reqs = | 
 | 		vzalloc(array3_size(sizeof(struct test_batched_req), | 
 | 				    test_fw_config->num_requests, 2)); | 
 | 	if (!test_fw_config->reqs) { | 
 | 		rc = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	pr_info("batched loading '%s' custom fallback mechanism %u times\n", | 
 | 		test_fw_config->name, test_fw_config->num_requests); | 
 |  | 
 | 	send_uevent = test_fw_config->send_uevent ? FW_ACTION_HOTPLUG : | 
 | 		FW_ACTION_NOHOTPLUG; | 
 |  | 
 | 	for (i = 0; i < test_fw_config->num_requests; i++) { | 
 | 		req = &test_fw_config->reqs[i]; | 
 | 		req->name = test_fw_config->name; | 
 | 		req->fw = NULL; | 
 | 		req->idx = i; | 
 | 		init_completion(&req->completion); | 
 | 		rc = request_firmware_nowait(THIS_MODULE, send_uevent, | 
 | 					     req->name, | 
 | 					     dev, GFP_KERNEL, req, | 
 | 					     trigger_batched_cb); | 
 | 		if (rc) { | 
 | 			pr_info("#%u: batched async load failed setup: %d\n", | 
 | 				i, rc); | 
 | 			req->rc = rc; | 
 | 			goto out_bail; | 
 | 		} else | 
 | 			req->sent = true; | 
 | 	} | 
 |  | 
 | 	rc = count; | 
 |  | 
 | out_bail: | 
 |  | 
 | 	/* | 
 | 	 * We require an explicit release to enable more time and delay of | 
 | 	 * calling release_firmware() to improve our chances of forcing a | 
 | 	 * batched request. If we instead called release_firmware() right away | 
 | 	 * then we might miss on an opportunity of having a successful firmware | 
 | 	 * request pass on the opportunity to be come a batched request. | 
 | 	 */ | 
 |  | 
 | 	for (i = 0; i < test_fw_config->num_requests; i++) { | 
 | 		req = &test_fw_config->reqs[i]; | 
 | 		if (req->sent) | 
 | 			wait_for_completion(&req->completion); | 
 | 	} | 
 |  | 
 | 	/* Override any worker error if we had a general setup error */ | 
 | 	if (rc < 0) | 
 | 		test_fw_config->test_result = rc; | 
 |  | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_WO(trigger_batched_requests_async); | 
 |  | 
 | static ssize_t test_result_show(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	return test_dev_config_show_int(buf, test_fw_config->test_result); | 
 | } | 
 | static DEVICE_ATTR_RO(test_result); | 
 |  | 
 | static ssize_t release_all_firmware_store(struct device *dev, | 
 | 					  struct device_attribute *attr, | 
 | 					  const char *buf, size_t count) | 
 | { | 
 | 	test_release_all_firmware(); | 
 | 	return count; | 
 | } | 
 | static DEVICE_ATTR_WO(release_all_firmware); | 
 |  | 
 | static ssize_t read_firmware_show(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  char *buf) | 
 | { | 
 | 	struct test_batched_req *req; | 
 | 	u8 idx; | 
 | 	ssize_t rc = 0; | 
 |  | 
 | 	mutex_lock(&test_fw_mutex); | 
 |  | 
 | 	idx = test_fw_config->read_fw_idx; | 
 | 	if (idx >= test_fw_config->num_requests) { | 
 | 		rc = -ERANGE; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!test_fw_config->reqs) { | 
 | 		rc = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	req = &test_fw_config->reqs[idx]; | 
 | 	if (!req->fw) { | 
 | 		pr_err("#%u: failed to async load firmware\n", idx); | 
 | 		rc = -ENOENT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	pr_info("#%u: loaded %zu\n", idx, req->fw->size); | 
 |  | 
 | 	if (req->fw->size > PAGE_SIZE) { | 
 | 		pr_err("Testing interface must use PAGE_SIZE firmware for now\n"); | 
 | 		rc = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 | 	memcpy(buf, req->fw->data, req->fw->size); | 
 |  | 
 | 	rc = req->fw->size; | 
 | out: | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	return rc; | 
 | } | 
 | static DEVICE_ATTR_RO(read_firmware); | 
 |  | 
 | #define TEST_FW_DEV_ATTR(name)          &dev_attr_##name.attr | 
 |  | 
 | static struct attribute *test_dev_attrs[] = { | 
 | 	TEST_FW_DEV_ATTR(reset), | 
 |  | 
 | 	TEST_FW_DEV_ATTR(config), | 
 | 	TEST_FW_DEV_ATTR(config_name), | 
 | 	TEST_FW_DEV_ATTR(config_num_requests), | 
 | 	TEST_FW_DEV_ATTR(config_into_buf), | 
 | 	TEST_FW_DEV_ATTR(config_sync_direct), | 
 | 	TEST_FW_DEV_ATTR(config_send_uevent), | 
 | 	TEST_FW_DEV_ATTR(config_read_fw_idx), | 
 |  | 
 | 	/* These don't use the config at all - they could be ported! */ | 
 | 	TEST_FW_DEV_ATTR(trigger_request), | 
 | 	TEST_FW_DEV_ATTR(trigger_async_request), | 
 | 	TEST_FW_DEV_ATTR(trigger_custom_fallback), | 
 | #ifdef CONFIG_EFI_EMBEDDED_FIRMWARE | 
 | 	TEST_FW_DEV_ATTR(trigger_request_platform), | 
 | #endif | 
 |  | 
 | 	/* These use the config and can use the test_result */ | 
 | 	TEST_FW_DEV_ATTR(trigger_batched_requests), | 
 | 	TEST_FW_DEV_ATTR(trigger_batched_requests_async), | 
 |  | 
 | 	TEST_FW_DEV_ATTR(release_all_firmware), | 
 | 	TEST_FW_DEV_ATTR(test_result), | 
 | 	TEST_FW_DEV_ATTR(read_firmware), | 
 | 	NULL, | 
 | }; | 
 |  | 
 | ATTRIBUTE_GROUPS(test_dev); | 
 |  | 
 | static struct miscdevice test_fw_misc_device = { | 
 | 	.minor          = MISC_DYNAMIC_MINOR, | 
 | 	.name           = "test_firmware", | 
 | 	.fops           = &test_fw_fops, | 
 | 	.groups 	= test_dev_groups, | 
 | }; | 
 |  | 
 | static int __init test_firmware_init(void) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	test_fw_config = kzalloc(sizeof(struct test_config), GFP_KERNEL); | 
 | 	if (!test_fw_config) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	rc = __test_firmware_config_init(); | 
 | 	if (rc) { | 
 | 		kfree(test_fw_config); | 
 | 		pr_err("could not init firmware test config: %d\n", rc); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = misc_register(&test_fw_misc_device); | 
 | 	if (rc) { | 
 | 		kfree(test_fw_config); | 
 | 		pr_err("could not register misc device: %d\n", rc); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	pr_warn("interface ready\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | module_init(test_firmware_init); | 
 |  | 
 | static void __exit test_firmware_exit(void) | 
 | { | 
 | 	mutex_lock(&test_fw_mutex); | 
 | 	release_firmware(test_firmware); | 
 | 	misc_deregister(&test_fw_misc_device); | 
 | 	__test_firmware_config_free(); | 
 | 	kfree(test_fw_config); | 
 | 	mutex_unlock(&test_fw_mutex); | 
 |  | 
 | 	pr_warn("removed interface\n"); | 
 | } | 
 |  | 
 | module_exit(test_firmware_exit); | 
 |  | 
 | MODULE_AUTHOR("Kees Cook <keescook@chromium.org>"); | 
 | MODULE_LICENSE("GPL"); |