| # SPDX-License-Identifier: GPL-2.0 | |
| # | |
| # SATA/PATA driver configuration | |
| # | |
| config HAVE_PATA_PLATFORM | |
| bool | |
| help | |
| This is an internal configuration node for any machine that | |
| uses pata-platform driver to enable the relevant driver in the | |
| configuration structure without having to submit endless patches | |
| to update the PATA_PLATFORM entry. | |
| menuconfig ATA | |
| tristate "Serial ATA and Parallel ATA drivers (libata)" | |
| depends on HAS_IOMEM | |
| depends on BLOCK | |
| select SCSI | |
| select GLOB | |
| ---help--- | |
| If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or | |
| any other ATA device under Linux, say Y and make sure that you know | |
| the name of your ATA host adapter (the card inside your computer | |
| that "speaks" the ATA protocol, also called ATA controller), | |
| because you will be asked for it. | |
| NOTE: ATA enables basic SCSI support; *however*, | |
| 'SCSI disk support', 'SCSI tape support', or | |
| 'SCSI CDROM support' may also be needed, | |
| depending on your hardware configuration. | |
| if ATA | |
| config ATA_NONSTANDARD | |
| bool | |
| default n | |
| config ATA_VERBOSE_ERROR | |
| bool "Verbose ATA error reporting" | |
| default y | |
| help | |
| This option adds parsing of ATA command descriptions and error bits | |
| in libata kernel output, making it easier to interpret. | |
| This option will enlarge the kernel by approx. 6KB. Disable it only | |
| if kernel size is more important than ease of debugging. | |
| If unsure, say Y. | |
| config ATA_ACPI | |
| bool "ATA ACPI Support" | |
| depends on ACPI | |
| default y | |
| help | |
| This option adds support for ATA-related ACPI objects. | |
| These ACPI objects add the ability to retrieve taskfiles | |
| from the ACPI BIOS and write them to the disk controller. | |
| These objects may be related to performance, security, | |
| power management, or other areas. | |
| You can disable this at kernel boot time by using the | |
| option libata.noacpi=1 | |
| config SATA_ZPODD | |
| bool "SATA Zero Power Optical Disc Drive (ZPODD) support" | |
| depends on ATA_ACPI && PM | |
| default n | |
| help | |
| This option adds support for SATA Zero Power Optical Disc | |
| Drive (ZPODD). It requires both the ODD and the platform | |
| support, and if enabled, will automatically power on/off the | |
| ODD when certain condition is satisfied. This does not impact | |
| end user's experience of the ODD, only power is saved when | |
| the ODD is not in use (i.e. no disc inside). | |
| If unsure, say N. | |
| config SATA_PMP | |
| bool "SATA Port Multiplier support" | |
| default y | |
| help | |
| This option adds support for SATA Port Multipliers | |
| (the SATA version of an ethernet hub, or SAS expander). | |
| if HAS_DMA | |
| comment "Controllers with non-SFF native interface" | |
| config SATA_AHCI | |
| tristate "AHCI SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for AHCI Serial ATA. | |
| If unsure, say N. | |
| config SATA_MOBILE_LPM_POLICY | |
| int "Default SATA Link Power Management policy for mobile chipsets" | |
| range 0 4 | |
| default 0 | |
| depends on SATA_AHCI | |
| help | |
| Select the Default SATA Link Power Management (LPM) policy to use | |
| for mobile / laptop variants of chipsets / "South Bridges". | |
| The value set has the following meanings: | |
| 0 => Keep firmware settings | |
| 1 => Maximum performance | |
| 2 => Medium power | |
| 3 => Medium power with Device Initiated PM enabled | |
| 4 => Minimum power | |
| Note "Minimum power" is known to cause issues, including disk | |
| corruption, with some disks and should not be used. | |
| config SATA_AHCI_PLATFORM | |
| tristate "Platform AHCI SATA support" | |
| help | |
| This option enables support for Platform AHCI Serial ATA | |
| controllers. | |
| If unsure, say N. | |
| config AHCI_BRCM | |
| tristate "Broadcom AHCI SATA support" | |
| depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP | |
| help | |
| This option enables support for the AHCI SATA3 controller found on | |
| Broadcom SoC's. | |
| If unsure, say N. | |
| config AHCI_DA850 | |
| tristate "DaVinci DA850 AHCI SATA support" | |
| depends on ARCH_DAVINCI_DA850 | |
| help | |
| This option enables support for the DaVinci DA850 SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config AHCI_DM816 | |
| tristate "DaVinci DM816 AHCI SATA support" | |
| depends on ARCH_OMAP2PLUS | |
| help | |
| This option enables support for the DaVinci DM816 SoC's | |
| onboard AHCI SATA controller. | |
| If unsure, say N. | |
| config AHCI_ST | |
| tristate "ST AHCI SATA support" | |
| depends on ARCH_STI | |
| help | |
| This option enables support for ST AHCI SATA controller. | |
| If unsure, say N. | |
| config AHCI_IMX | |
| tristate "Freescale i.MX AHCI SATA support" | |
| depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) | |
| depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON | |
| help | |
| This option enables support for the Freescale i.MX SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config AHCI_CEVA | |
| tristate "CEVA AHCI SATA support" | |
| depends on OF | |
| help | |
| This option enables support for the CEVA AHCI SATA. | |
| It can be found on the Xilinx Zynq UltraScale+ MPSoC. | |
| If unsure, say N. | |
| config AHCI_MTK | |
| tristate "MediaTek AHCI SATA support" | |
| depends on ARCH_MEDIATEK | |
| select MFD_SYSCON | |
| help | |
| This option enables support for the MediaTek SoC's | |
| onboard AHCI SATA controller. | |
| If unsure, say N. | |
| config AHCI_MVEBU | |
| tristate "Marvell EBU AHCI SATA support" | |
| depends on ARCH_MVEBU | |
| help | |
| This option enables support for the Marvebu EBU SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config AHCI_OCTEON | |
| tristate "Cavium Octeon Soc Serial ATA" | |
| depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC | |
| default y | |
| help | |
| This option enables support for Cavium Octeon SoC Serial ATA. | |
| If unsure, say N. | |
| config AHCI_SUNXI | |
| tristate "Allwinner sunxi AHCI SATA support" | |
| depends on ARCH_SUNXI | |
| help | |
| This option enables support for the Allwinner sunxi SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config AHCI_TEGRA | |
| tristate "NVIDIA Tegra AHCI SATA support" | |
| depends on ARCH_TEGRA | |
| help | |
| This option enables support for the NVIDIA Tegra SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config AHCI_XGENE | |
| tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" | |
| depends on PHY_XGENE | |
| help | |
| This option enables support for APM X-Gene SoC SATA host controller. | |
| config AHCI_QORIQ | |
| tristate "Freescale QorIQ AHCI SATA support" | |
| depends on OF | |
| help | |
| This option enables support for the Freescale QorIQ AHCI SoC's | |
| onboard AHCI SATA. | |
| If unsure, say N. | |
| config SATA_FSL | |
| tristate "Freescale 3.0Gbps SATA support" | |
| depends on FSL_SOC | |
| help | |
| This option enables support for Freescale 3.0Gbps SATA controller. | |
| It can be found on MPC837x and MPC8315. | |
| If unsure, say N. | |
| config SATA_GEMINI | |
| tristate "Gemini SATA bridge support" | |
| depends on ARCH_GEMINI || COMPILE_TEST | |
| default ARCH_GEMINI | |
| help | |
| This enabled support for the FTIDE010 to SATA bridge | |
| found in Cortina Systems Gemini platform. | |
| If unsure, say N. | |
| config SATA_AHCI_SEATTLE | |
| tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" | |
| depends on ARCH_SEATTLE | |
| help | |
| This option enables support for AMD Seattle SATA host controller. | |
| If unsure, say N | |
| config SATA_INIC162X | |
| tristate "Initio 162x SATA support (Very Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for Initio 162x Serial ATA. | |
| config SATA_ACARD_AHCI | |
| tristate "ACard AHCI variant (ATP 8620)" | |
| depends on PCI | |
| help | |
| This option enables support for Acard. | |
| If unsure, say N. | |
| config SATA_SIL24 | |
| tristate "Silicon Image 3124/3132 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image 3124/3132 Serial ATA. | |
| If unsure, say N. | |
| endif # HAS_DMA | |
| config ATA_SFF | |
| bool "ATA SFF support (for legacy IDE and PATA)" | |
| default y | |
| help | |
| This option adds support for ATA controllers with SFF | |
| compliant or similar programming interface. | |
| SFF is the legacy IDE interface that has been around since | |
| the dawn of time. Almost all PATA controllers have an | |
| SFF interface. Many SATA controllers have an SFF interface | |
| when configured into a legacy compatibility mode. | |
| For users with exclusively modern controllers like AHCI, | |
| Silicon Image 3124, or Marvell 6440, you may choose to | |
| disable this unneeded SFF support. | |
| If unsure, say Y. | |
| if ATA_SFF | |
| comment "SFF controllers with custom DMA interface" | |
| config PDC_ADMA | |
| tristate "Pacific Digital ADMA support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital ADMA controllers | |
| If unsure, say N. | |
| config PATA_OCTEON_CF | |
| tristate "OCTEON Boot Bus Compact Flash support" | |
| depends on CAVIUM_OCTEON_SOC | |
| help | |
| This option enables a polled compact flash driver for use with | |
| compact flash cards attached to the OCTEON boot bus. | |
| If unsure, say N. | |
| config SATA_QSTOR | |
| tristate "Pacific Digital SATA QStor support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital Serial ATA QStor. | |
| If unsure, say N. | |
| config SATA_SX4 | |
| tristate "Promise SATA SX4 support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for Promise Serial ATA SX4. | |
| If unsure, say N. | |
| config ATA_BMDMA | |
| bool "ATA BMDMA support" | |
| depends on HAS_DMA | |
| default y | |
| help | |
| This option adds support for SFF ATA controllers with BMDMA | |
| capability. BMDMA stands for bus-master DMA and is the | |
| de facto DMA interface for SFF controllers. | |
| If unsure, say Y. | |
| if ATA_BMDMA | |
| comment "SATA SFF controllers with BMDMA" | |
| config ATA_PIIX | |
| tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ICH5/6/7/8 Serial ATA | |
| and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series | |
| host controllers. | |
| If unsure, say N. | |
| config SATA_DWC | |
| tristate "DesignWare Cores SATA support" | |
| depends on DMADEVICES | |
| select GENERIC_PHY | |
| help | |
| This option enables support for the on-chip SATA controller of the | |
| AppliedMicro processor 460EX. | |
| If unsure, say N. | |
| config SATA_DWC_OLD_DMA | |
| bool "Support old device trees" | |
| depends on SATA_DWC | |
| select DW_DMAC_CORE | |
| default y if 460EX | |
| help | |
| This option enables support for old device trees without the | |
| "dmas" property. | |
| config SATA_DWC_DEBUG | |
| bool "Debugging driver version" | |
| depends on SATA_DWC | |
| help | |
| This option enables debugging output in the driver. | |
| config SATA_DWC_VDEBUG | |
| bool "Verbose debug output" | |
| depends on SATA_DWC_DEBUG | |
| help | |
| This option enables the taskfile dumping and NCQ debugging. | |
| config SATA_HIGHBANK | |
| tristate "Calxeda Highbank SATA support" | |
| depends on ARCH_HIGHBANK || COMPILE_TEST | |
| help | |
| This option enables support for the Calxeda Highbank SoC's | |
| onboard SATA. | |
| If unsure, say N. | |
| config SATA_MV | |
| tristate "Marvell SATA support" | |
| depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ | |
| ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST | |
| select GENERIC_PHY | |
| help | |
| This option enables support for the Marvell Serial ATA family. | |
| Currently supports 88SX[56]0[48][01] PCI(-X) chips, | |
| as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
| If unsure, say N. | |
| config SATA_NV | |
| tristate "NVIDIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for NVIDIA Serial ATA. | |
| If unsure, say N. | |
| config SATA_PROMISE | |
| tristate "Promise SATA TX2/TX4 support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise Serial ATA TX2/TX4. | |
| If unsure, say N. | |
| config SATA_RCAR | |
| tristate "Renesas R-Car SATA support" | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| help | |
| This option enables support for Renesas R-Car Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIL | |
| tristate "Silicon Image SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIS | |
| tristate "SiS 964/965/966/180 SATA support" | |
| depends on PCI | |
| select PATA_SIS | |
| help | |
| This option enables support for SiS Serial ATA on | |
| SiS 964/965/966/180 and Parallel ATA on SiS 180. | |
| The PATA support for SiS 180 requires additionally to | |
| enable the PATA_SIS driver in the config. | |
| If unsure, say N. | |
| config SATA_SVW | |
| tristate "ServerWorks Frodo / Apple K2 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Broadcom/Serverworks/Apple K2 | |
| SATA support. | |
| If unsure, say N. | |
| config SATA_ULI | |
| tristate "ULi Electronics SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ULi Electronics SATA. | |
| If unsure, say N. | |
| config SATA_VIA | |
| tristate "VIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for VIA Serial ATA. | |
| If unsure, say N. | |
| config SATA_VITESSE | |
| tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
| If unsure, say N. | |
| comment "PATA SFF controllers with BMDMA" | |
| config PATA_ALI | |
| tristate "ALi PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the ALi ATA interfaces | |
| found on the many ALi chipsets. | |
| If unsure, say N. | |
| config PATA_AMD | |
| tristate "AMD/NVidia PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the AMD and NVidia PATA | |
| interfaces found on the chipsets for Athlon/Athlon64. | |
| If unsure, say N. | |
| config PATA_ARASAN_CF | |
| tristate "ARASAN CompactFlash PATA Controller Support" | |
| depends on ARCH_SPEAR13XX || COMPILE_TEST | |
| depends on DMADEVICES | |
| select DMA_ENGINE | |
| help | |
| Say Y here to support the ARASAN CompactFlash PATA controller | |
| config PATA_ARTOP | |
| tristate "ARTOP 6210/6260 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ARTOP PATA controllers. | |
| If unsure, say N. | |
| config PATA_ATIIXP | |
| tristate "ATI PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the ATI ATA interfaces | |
| found on the many ATI chipsets. | |
| If unsure, say N. | |
| config PATA_ATP867X | |
| tristate "ARTOP/Acard ATP867X PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ARTOP/Acard ATP867X PATA | |
| controllers. | |
| If unsure, say N. | |
| config PATA_BK3710 | |
| tristate "Palmchip BK3710 PATA support" | |
| depends on ARCH_DAVINCI | |
| help | |
| This option enables support for the integrated IDE controller on | |
| the TI DaVinci SoC. | |
| If unsure, say N. | |
| config PATA_CMD64X | |
| tristate "CMD64x PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the CMD64x series chips | |
| except for the CMD640. | |
| If unsure, say N. | |
| config PATA_CS5520 | |
| tristate "CS5510/5520 PATA support" | |
| depends on PCI && (X86_32 || COMPILE_TEST) | |
| help | |
| This option enables support for the Cyrix 5510/5520 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5530 | |
| tristate "CS5530 PATA support" | |
| depends on PCI && (X86_32 || COMPILE_TEST) | |
| help | |
| This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5535 | |
| tristate "CS5535 PATA support (Experimental)" | |
| depends on PCI && X86_32 | |
| help | |
| This option enables support for the NatSemi/AMD CS5535 | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5536 | |
| tristate "CS5536 PATA support" | |
| depends on PCI && (X86_32 || MIPS || COMPILE_TEST) | |
| help | |
| This option enables support for the AMD CS5536 | |
| companion chip used with the Geode LX processor family. | |
| If unsure, say N. | |
| config PATA_CYPRESS | |
| tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the Cypress/Contaq CY82C693 | |
| chipset found in some Alpha systems | |
| If unsure, say N. | |
| config PATA_EFAR | |
| tristate "EFAR SLC90E66 support" | |
| depends on PCI | |
| help | |
| This option enables support for the EFAR SLC90E66 | |
| IDE controller found on some older machines. | |
| If unsure, say N. | |
| config PATA_EP93XX | |
| tristate "Cirrus Logic EP93xx PATA support" | |
| depends on ARCH_EP93XX | |
| help | |
| This option enables support for the PATA controller in | |
| the Cirrus Logic EP9312 and EP9315 ARM CPU. | |
| If unsure, say N. | |
| config PATA_FTIDE010 | |
| tristate "Faraday Technology FTIDE010 PATA support" | |
| depends on OF | |
| depends on ARM | |
| depends on SATA_GEMINI | |
| help | |
| This option enables support for the Faraday FTIDE010 | |
| PATA controller found in the Cortina Gemini SoCs. | |
| If unsure, say N. | |
| config PATA_HPT366 | |
| tristate "HPT 366/368 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the HPT 366 and 368 | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT37X | |
| tristate "HPT 370/370A/371/372/374/302 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the majority of the later HPT | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT3X2N | |
| tristate "HPT 371N/372N/302N PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the N variant HPT PATA | |
| controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT3X3 | |
| tristate "HPT 343/363 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the HPT 343/363 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT3X3_DMA | |
| bool "HPT 343/363 DMA support" | |
| depends on PATA_HPT3X3 | |
| help | |
| This option enables DMA support for the HPT343/363 | |
| controllers. Enable with care as there are still some | |
| problems with DMA on this chipset. | |
| config PATA_ICSIDE | |
| tristate "Acorn ICS PATA support" | |
| depends on ARM && ARCH_ACORN | |
| help | |
| On Acorn systems, say Y here if you wish to use the ICS PATA | |
| interface card. This is not required for ICS partition support. | |
| If you are unsure, say N to this. | |
| config PATA_IMX | |
| tristate "PATA support for Freescale iMX" | |
| depends on ARCH_MXC | |
| help | |
| This option enables support for the PATA host available on Freescale | |
| iMX SoCs. | |
| If unsure, say N. | |
| config PATA_IT8213 | |
| tristate "IT8213 PATA support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the ITE 821 PATA | |
| controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_IT821X | |
| tristate "IT8211/2 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the ITE 8211 and 8212 | |
| PATA controllers via the new ATA layer, including RAID | |
| mode. | |
| If unsure, say N. | |
| config PATA_JMICRON | |
| tristate "JMicron PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the JMicron IDE controller, via the new | |
| ATA layer. | |
| If unsure, say N. | |
| config PATA_MACIO | |
| tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
| depends on PPC_PMAC | |
| help | |
| Most IDE capable PowerMacs have IDE busses driven by a variant | |
| of this controller which is part of the Apple chipset used on | |
| most PowerMac models. Some models have multiple busses using | |
| different chipsets, though generally, MacIO is one of them. | |
| config PATA_MARVELL | |
| tristate "Marvell PATA support via legacy mode" | |
| depends on PCI | |
| help | |
| This option enables limited support for the Marvell 88SE61xx ATA | |
| controllers. If you wish to use only the SATA ports then select | |
| the AHCI driver alone. If you wish to the use the PATA port or | |
| both SATA and PATA include this driver. | |
| If unsure, say N. | |
| config PATA_MPC52xx | |
| tristate "Freescale MPC52xx SoC internal IDE" | |
| depends on PPC_MPC52xx && PPC_BESTCOMM | |
| select PPC_BESTCOMM_ATA | |
| help | |
| This option enables support for integrated IDE controller | |
| of the Freescale MPC52xx SoC. | |
| If unsure, say N. | |
| config PATA_NETCELL | |
| tristate "NETCELL Revolution RAID support" | |
| depends on PCI | |
| help | |
| This option enables support for the Netcell Revolution RAID | |
| PATA controller. | |
| If unsure, say N. | |
| config PATA_NINJA32 | |
| tristate "Ninja32/Delkin Cardbus ATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the Ninja32, Delkin and | |
| possibly other brands of Cardbus ATA adapter | |
| If unsure, say N. | |
| config PATA_NS87415 | |
| tristate "Nat Semi NS87415 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the National Semiconductor | |
| NS87415 PCI-IDE controller. | |
| If unsure, say N. | |
| config PATA_OLDPIIX | |
| tristate "Intel PATA old PIIX support" | |
| depends on PCI | |
| help | |
| This option enables support for early PIIX PATA support. | |
| If unsure, say N. | |
| config PATA_OPTIDMA | |
| tristate "OPTI FireStar PATA support (Very Experimental)" | |
| depends on PCI | |
| help | |
| This option enables DMA/PIO support for the later OPTi | |
| controllers found on some old motherboards and in some | |
| laptops. | |
| If unsure, say N. | |
| config PATA_PDC2027X | |
| tristate "Promise PATA 2027x support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
| If unsure, say N. | |
| config PATA_PDC_OLD | |
| tristate "Older Promise PATA controller support" | |
| depends on PCI | |
| help | |
| This option enables support for the Promise 20246, 20262, 20263, | |
| 20265 and 20267 adapters. | |
| If unsure, say N. | |
| config PATA_RADISYS | |
| tristate "RADISYS 82600 PATA support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the RADISYS 82600 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_RDC | |
| tristate "RDC PATA support" | |
| depends on PCI | |
| help | |
| This option enables basic support for the later RDC PATA controllers | |
| controllers via the new ATA layer. For the RDC 1010, you need to | |
| enable the IT821X driver instead. | |
| If unsure, say N. | |
| config PATA_SC1200 | |
| tristate "SC1200 PATA support" | |
| depends on PCI && (X86_32 || COMPILE_TEST) | |
| help | |
| This option enables support for the NatSemi/AMD SC1200 SoC | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_SCH | |
| tristate "Intel SCH PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Intel SCH PATA on the Intel | |
| SCH (US15W, US15L, UL11L) series host controllers. | |
| If unsure, say N. | |
| config PATA_SERVERWORKS | |
| tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
| HT1000 PATA controllers, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_SIL680 | |
| tristate "CMD / Silicon Image 680 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for CMD / Silicon Image 680 PATA. | |
| If unsure, say N. | |
| config PATA_SIS | |
| tristate "SiS PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for SiS PATA controllers | |
| If unsure, say N. | |
| config PATA_TOSHIBA | |
| tristate "Toshiba Piccolo support (Experimental)" | |
| depends on PCI | |
| help | |
| Support for the Toshiba Piccolo controllers. Currently only the | |
| primary channel is supported by this driver. | |
| If unsure, say N. | |
| config PATA_TRIFLEX | |
| tristate "Compaq Triflex PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the Compaq 'Triflex' IDE controller as found | |
| on many Compaq Pentium-Pro systems, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_VIA | |
| tristate "VIA PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the VIA PATA interfaces | |
| found on the many VIA chipsets. | |
| If unsure, say N. | |
| config PATA_PXA | |
| tristate "PXA DMA-capable PATA support" | |
| depends on ARCH_PXA | |
| help | |
| This option enables support for harddrive attached to PXA CPU's bus. | |
| NOTE: This driver utilizes PXA DMA controller, in case your hardware | |
| is not capable of doing MWDMA, use pata_platform instead. | |
| If unsure, say N. | |
| config PATA_WINBOND | |
| tristate "Winbond SL82C105 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for SL82C105 PATA devices found in the | |
| Netwinder and some other systems | |
| If unsure, say N. | |
| endif # ATA_BMDMA | |
| comment "PIO-only SFF controllers" | |
| config PATA_CMD640_PCI | |
| tristate "CMD640 PCI PATA support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the CMD640 PCI IDE | |
| interface chip. Only the primary channel is currently | |
| supported. | |
| If unsure, say N. | |
| config PATA_FALCON | |
| tristate "Atari Falcon PATA support" | |
| depends on M68K && ATARI | |
| help | |
| This option enables support for the on-board IDE | |
| interface on the Atari Falcon. | |
| If unsure, say N. | |
| config PATA_GAYLE | |
| tristate "Amiga Gayle PATA support" | |
| depends on M68K && AMIGA | |
| help | |
| This option enables support for the on-board IDE | |
| interfaces on some Amiga models (A600, A1200, | |
| A4000 and A4000T) and also for IDE interfaces on | |
| the Zorro expansion bus (M-Tech E-Matrix 530 | |
| expansion card). | |
| If unsure, say N. | |
| config PATA_ISAPNP | |
| tristate "ISA Plug and Play PATA support" | |
| depends on ISAPNP | |
| help | |
| This option enables support for ISA plug & play ATA | |
| controllers such as those found on old soundcards. | |
| If unsure, say N. | |
| config PATA_IXP4XX_CF | |
| tristate "IXP4XX Compact Flash support" | |
| depends on ARCH_IXP4XX | |
| help | |
| This option enables support for a Compact Flash connected on | |
| the ixp4xx expansion bus. This driver had been written for | |
| Loft/Avila boards in mind but can work with others. | |
| If unsure, say N. | |
| config PATA_MPIIX | |
| tristate "Intel PATA MPIIX support" | |
| depends on PCI | |
| help | |
| This option enables support for MPIIX PATA support. | |
| If unsure, say N. | |
| config PATA_NS87410 | |
| tristate "Nat Semi NS87410 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the National Semiconductor | |
| NS87410 PCI-IDE controller. | |
| If unsure, say N. | |
| config PATA_OPTI | |
| tristate "OPTI621/6215 PATA support (Very Experimental)" | |
| depends on PCI | |
| help | |
| This option enables full PIO support for the early Opti ATA | |
| controllers found on some old motherboards. | |
| If unsure, say N. | |
| config PATA_PALMLD | |
| tristate "Palm LifeDrive PATA support" | |
| depends on MACH_PALMLD | |
| help | |
| This option enables support for Palm LifeDrive's internal ATA | |
| port via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PCMCIA | |
| tristate "PCMCIA PATA support" | |
| depends on PCMCIA | |
| help | |
| This option enables support for PCMCIA ATA interfaces, including | |
| compact flash card adapters via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PLATFORM | |
| tristate "Generic platform device PATA support" | |
| depends on EXPERT || PPC || HAVE_PATA_PLATFORM | |
| help | |
| This option enables support for generic directly connected ATA | |
| devices commonly found on embedded systems. | |
| If unsure, say N. | |
| config PATA_OF_PLATFORM | |
| tristate "OpenFirmware platform device PATA support" | |
| depends on PATA_PLATFORM && OF | |
| help | |
| This option enables support for generic directly connected ATA | |
| devices commonly found on embedded systems with OpenFirmware | |
| bindings. | |
| If unsure, say N. | |
| config PATA_QDI | |
| tristate "QDI VLB PATA support" | |
| depends on ISA | |
| select PATA_LEGACY | |
| help | |
| Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
| config PATA_RB532 | |
| tristate "RouterBoard 532 PATA CompactFlash support" | |
| depends on MIKROTIK_RB532 | |
| help | |
| This option enables support for the RouterBoard 532 | |
| PATA CompactFlash controller. | |
| If unsure, say N. | |
| config PATA_RZ1000 | |
| tristate "PC Tech RZ1000 PATA support" | |
| depends on PCI | |
| help | |
| This option enables basic support for the PC Tech RZ1000/1 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_SAMSUNG_CF | |
| tristate "Samsung SoC PATA support" | |
| depends on SAMSUNG_DEV_IDE | |
| help | |
| This option enables basic support for Samsung's S3C/S5P board | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_WINBOND_VLB | |
| tristate "Winbond W83759A VLB PATA support (Experimental)" | |
| depends on ISA | |
| select PATA_LEGACY | |
| help | |
| Support for the Winbond W83759A controller on Vesa Local Bus | |
| systems. | |
| comment "Generic fallback / legacy drivers" | |
| config PATA_ACPI | |
| tristate "ACPI firmware driver for PATA" | |
| depends on ATA_ACPI && ATA_BMDMA | |
| help | |
| This option enables an ACPI method driver which drives | |
| motherboard PATA controller interfaces through the ACPI | |
| firmware in the BIOS. This driver can sometimes handle | |
| otherwise unsupported hardware. | |
| config ATA_GENERIC | |
| tristate "Generic ATA support" | |
| depends on PCI && ATA_BMDMA | |
| help | |
| This option enables support for generic BIOS configured | |
| ATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_LEGACY | |
| tristate "Legacy ISA PATA support (Experimental)" | |
| depends on (ISA || PCI) | |
| help | |
| This option enables support for ISA/VLB/PCI bus legacy PATA | |
| ports and allows them to be accessed via the new ATA layer. | |
| If unsure, say N. | |
| endif # ATA_SFF | |
| endif # ATA |