blob: 7810b1d7de32f573d2c5708b176a41828da1a33d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* rt5677-spi.c -- RT5677 ALSA SoC audio codec driver
*
* Copyright 2013 Realtek Semiconductor Corp.
* Author: Oder Chiou <oder_chiou@realtek.com>
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_qos.h>
#include <linux/sysfs.h>
#include <linux/clk.h>
#include <linux/firmware.h>
#include <linux/acpi.h>
#include <sound/soc.h>
#include "rt5677.h"
#include "rt5677-spi.h"
#define DRV_NAME "rt5677spi"
#define RT5677_SPI_BURST_LEN 240
#define RT5677_SPI_HEADER 5
#define RT5677_SPI_FREQ 6000000
/* The AddressPhase and DataPhase of SPI commands are MSB first on the wire.
* DataPhase word size of 16-bit commands is 2 bytes.
* DataPhase word size of 32-bit commands is 4 bytes.
* DataPhase word size of burst commands is 8 bytes.
* The DSP CPU is little-endian.
*/
#define RT5677_SPI_WRITE_BURST 0x5
#define RT5677_SPI_READ_BURST 0x4
#define RT5677_SPI_WRITE_32 0x3
#define RT5677_SPI_READ_32 0x2
#define RT5677_SPI_WRITE_16 0x1
#define RT5677_SPI_READ_16 0x0
#define RT5677_BUF_BYTES_TOTAL 0x20000
#define RT5677_MIC_BUF_ADDR 0x60030000
#define RT5677_MODEL_ADDR 0x5FFC9800
#define RT5677_MIC_BUF_BYTES ((u32)(RT5677_BUF_BYTES_TOTAL - \
sizeof(u32)))
#define RT5677_MIC_BUF_FIRST_READ_SIZE 0x10000
static struct spi_device *g_spi;
static DEFINE_MUTEX(spi_mutex);
struct rt5677_dsp {
struct device *dev;
struct delayed_work copy_work;
struct mutex dma_lock;
struct snd_pcm_substream *substream;
size_t dma_offset; /* zero-based offset into runtime->dma_area */
size_t avail_bytes; /* number of new bytes since last period */
u32 mic_read_offset; /* zero-based offset into DSP's mic buffer */
bool new_hotword; /* a new hotword is fired */
};
static const struct snd_pcm_hardware rt5677_spi_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.period_bytes_min = PAGE_SIZE,
.period_bytes_max = RT5677_BUF_BYTES_TOTAL / 8,
.periods_min = 8,
.periods_max = 8,
.channels_min = 1,
.channels_max = 1,
.buffer_bytes_max = RT5677_BUF_BYTES_TOTAL,
};
static struct snd_soc_dai_driver rt5677_spi_dai = {
/* The DAI name "rt5677-dsp-cpu-dai" is not used. The actual DAI name
* registered with ASoC is the name of the device "spi-RT5677AA:00",
* because we only have one DAI. See snd_soc_register_dais().
*/
.name = "rt5677-dsp-cpu-dai",
.id = 0,
.capture = {
.stream_name = "DSP Capture",
.channels_min = 1,
.channels_max = 1,
.rates = SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
};
/* PCM for streaming audio from the DSP buffer */
static int rt5677_spi_pcm_open(
struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
snd_soc_set_runtime_hwparams(substream, &rt5677_spi_pcm_hardware);
return 0;
}
static int rt5677_spi_pcm_close(
struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_component *codec_component =
snd_soc_rtdcom_lookup(rtd, "rt5677");
struct rt5677_priv *rt5677 =
snd_soc_component_get_drvdata(codec_component);
struct rt5677_dsp *rt5677_dsp =
snd_soc_component_get_drvdata(component);
cancel_delayed_work_sync(&rt5677_dsp->copy_work);
rt5677->set_dsp_vad(codec_component, false);
return 0;
}
static int rt5677_spi_hw_params(
struct snd_soc_component *component,
struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
struct rt5677_dsp *rt5677_dsp =
snd_soc_component_get_drvdata(component);
int ret;
mutex_lock(&rt5677_dsp->dma_lock);
ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
rt5677_dsp->substream = substream;
mutex_unlock(&rt5677_dsp->dma_lock);
return ret;
}
static int rt5677_spi_hw_free(
struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
struct rt5677_dsp *rt5677_dsp =
snd_soc_component_get_drvdata(component);
mutex_lock(&rt5677_dsp->dma_lock);
rt5677_dsp->substream = NULL;
mutex_unlock(&rt5677_dsp->dma_lock);
return snd_pcm_lib_free_pages(substream);
}
static int rt5677_spi_prepare(
struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_component *rt5677_component =
snd_soc_rtdcom_lookup(rtd, "rt5677");
struct rt5677_priv *rt5677 =
snd_soc_component_get_drvdata(rt5677_component);
struct rt5677_dsp *rt5677_dsp =
snd_soc_component_get_drvdata(component);
rt5677->set_dsp_vad(rt5677_component, true);
rt5677_dsp->dma_offset = 0;
rt5677_dsp->avail_bytes = 0;
return 0;
}
static snd_pcm_uframes_t rt5677_spi_pcm_pointer(
struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct rt5677_dsp *rt5677_dsp =
snd_soc_component_get_drvdata(component);
return bytes_to_frames(runtime, rt5677_dsp->dma_offset);
}
static int rt5677_spi_mic_write_offset(u32 *mic_write_offset)
{
int ret;
/* Grab the first 4 bytes that hold the write pointer on the
* dsp, and check to make sure that it points somewhere inside the
* buffer.
*/
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR, mic_write_offset,
sizeof(u32));
if (ret)
return ret;
/* Adjust the offset so that it's zero-based */
*mic_write_offset = *mic_write_offset - sizeof(u32);
return *mic_write_offset < RT5677_MIC_BUF_BYTES ? 0 : -EFAULT;
}
/*
* Copy one contiguous block of audio samples from the DSP mic buffer to the
* dma_area of the pcm runtime. The receiving buffer may wrap around.
* @begin: start offset of the block to copy, in bytes.
* @end: offset of the first byte after the block to copy, must be greater
* than or equal to begin.
*
* Return: Zero if successful, or a negative error code on failure.
*/
static int rt5677_spi_copy_block(struct rt5677_dsp *rt5677_dsp,
u32 begin, u32 end)
{
struct snd_pcm_runtime *runtime = rt5677_dsp->substream->runtime;
size_t bytes_per_frame = frames_to_bytes(runtime, 1);
size_t first_chunk_len, second_chunk_len;
int ret;
if (begin > end || runtime->dma_bytes < 2 * bytes_per_frame) {
dev_err(rt5677_dsp->dev,
"Invalid copy from (%u, %u), dma_area size %zu\n",
begin, end, runtime->dma_bytes);
return -EINVAL;
}
/* The block to copy is empty */
if (begin == end)
return 0;
/* If the incoming chunk is too big for the receiving buffer, only the
* last "receiving buffer size - one frame" bytes are copied.
*/
if (end - begin > runtime->dma_bytes - bytes_per_frame)
begin = end - (runtime->dma_bytes - bytes_per_frame);
/* May need to split to two chunks, calculate the size of each */
first_chunk_len = end - begin;
second_chunk_len = 0;
if (rt5677_dsp->dma_offset + first_chunk_len > runtime->dma_bytes) {
/* Receiving buffer wrapped around */
second_chunk_len = first_chunk_len;
first_chunk_len = runtime->dma_bytes - rt5677_dsp->dma_offset;
second_chunk_len -= first_chunk_len;
}
/* Copy first chunk */
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) + begin,
runtime->dma_area + rt5677_dsp->dma_offset,
first_chunk_len);
if (ret)
return ret;
rt5677_dsp->dma_offset += first_chunk_len;
if (rt5677_dsp->dma_offset == runtime->dma_bytes)
rt5677_dsp->dma_offset = 0;
/* Copy second chunk */
if (second_chunk_len) {
ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) +
begin + first_chunk_len, runtime->dma_area,
second_chunk_len);
if (!ret)
rt5677_dsp->dma_offset = second_chunk_len;
}
return ret;
}
/*
* Copy a given amount of audio samples from the DSP mic buffer starting at
* mic_read_offset, to the dma_area of the pcm runtime. The source buffer may
* wrap around. mic_read_offset is updated after successful copy.
* @amount: amount of samples to copy, in bytes.
*
* Return: Zero if successful, or a negative error code on failure.
*/
static int rt5677_spi_copy(struct rt5677_dsp *rt5677_dsp, u32 amount)
{
int ret = 0;
u32 target;
if (amount == 0)
return ret;
target = rt5677_dsp->mic_read_offset + amount;
/* Copy the first chunk in DSP's mic buffer */
ret |= rt5677_spi_copy_block(rt5677_dsp, rt5677_dsp->mic_read_offset,
min(target, RT5677_MIC_BUF_BYTES));
if (target >= RT5677_MIC_BUF_BYTES) {
/* Wrap around, copy the second chunk */
target -= RT5677_MIC_BUF_BYTES;
ret |= rt5677_spi_copy_block(rt5677_dsp, 0, target);
}
if (!ret)
rt5677_dsp->mic_read_offset = target;
return ret;
}
/*
* A delayed work that streams audio samples from the DSP mic buffer to the
* dma_area of the pcm runtime via SPI.
*/
static void rt5677_spi_copy_work(struct work_struct *work)
{
struct rt5677_dsp *rt5677_dsp =
container_of(work, struct rt5677_dsp, copy_work.work);
struct snd_pcm_runtime *runtime;
u32 mic_write_offset;
size_t new_bytes, copy_bytes, period_bytes;
unsigned int delay;
int ret = 0;
/* Ensure runtime->dma_area buffer does not go away while copying. */
mutex_lock(&rt5677_dsp->dma_lock);
if (!rt5677_dsp->substream) {
dev_err(rt5677_dsp->dev, "No pcm substream\n");
goto done;
}
runtime = rt5677_dsp->substream->runtime;
if (rt5677_spi_mic_write_offset(&mic_write_offset)) {
dev_err(rt5677_dsp->dev, "No mic_write_offset\n");
goto done;
}
/* If this is the first time that we've asked for streaming data after
* a hotword is fired, we should start reading from the previous 2
* seconds of audio from wherever the mic_write_offset is currently.
*/
if (rt5677_dsp->new_hotword) {
rt5677_dsp->new_hotword = false;
/* See if buffer wraparound happens */
if (mic_write_offset < RT5677_MIC_BUF_FIRST_READ_SIZE)
rt5677_dsp->mic_read_offset = RT5677_MIC_BUF_BYTES -
(RT5677_MIC_BUF_FIRST_READ_SIZE -
mic_write_offset);
else
rt5677_dsp->mic_read_offset = mic_write_offset -
RT5677_MIC_BUF_FIRST_READ_SIZE;
}
/* Calculate the amount of new samples in bytes */
if (rt5677_dsp->mic_read_offset <= mic_write_offset)
new_bytes = mic_write_offset - rt5677_dsp->mic_read_offset;
else
new_bytes = RT5677_MIC_BUF_BYTES + mic_write_offset
- rt5677_dsp->mic_read_offset;
/* Copy all new samples from DSP mic buffer, one period at a time */
period_bytes = snd_pcm_lib_period_bytes(rt5677_dsp->substream);
while (new_bytes) {
copy_bytes = min(new_bytes, period_bytes
- rt5677_dsp->avail_bytes);
ret = rt5677_spi_copy(rt5677_dsp, copy_bytes);
if (ret) {
dev_err(rt5677_dsp->dev, "Copy failed %d\n", ret);
goto done;
}
rt5677_dsp->avail_bytes += copy_bytes;
if (rt5677_dsp->avail_bytes >= period_bytes) {
snd_pcm_period_elapsed(rt5677_dsp->substream);
rt5677_dsp->avail_bytes = 0;
}
new_bytes -= copy_bytes;
}
delay = bytes_to_frames(runtime, period_bytes) / (runtime->rate / 1000);
schedule_delayed_work(&rt5677_dsp->copy_work, msecs_to_jiffies(delay));
done:
mutex_unlock(&rt5677_dsp->dma_lock);
}
static int rt5677_spi_pcm_new(struct snd_soc_component *component,
struct snd_soc_pcm_runtime *rtd)
{
snd_pcm_lib_preallocate_pages_for_all(rtd->pcm, SNDRV_DMA_TYPE_VMALLOC,
NULL, 0, 0);
return 0;
}
static int rt5677_spi_pcm_probe(struct snd_soc_component *component)
{
struct rt5677_dsp *rt5677_dsp;
rt5677_dsp = devm_kzalloc(component->dev, sizeof(*rt5677_dsp),
GFP_KERNEL);
if (!rt5677_dsp)
return -ENOMEM;
rt5677_dsp->dev = &g_spi->dev;
mutex_init(&rt5677_dsp->dma_lock);
INIT_DELAYED_WORK(&rt5677_dsp->copy_work, rt5677_spi_copy_work);
snd_soc_component_set_drvdata(component, rt5677_dsp);
return 0;
}
static const struct snd_soc_component_driver rt5677_spi_dai_component = {
.name = DRV_NAME,
.probe = rt5677_spi_pcm_probe,
.open = rt5677_spi_pcm_open,
.close = rt5677_spi_pcm_close,
.hw_params = rt5677_spi_hw_params,
.hw_free = rt5677_spi_hw_free,
.prepare = rt5677_spi_prepare,
.pointer = rt5677_spi_pcm_pointer,
.pcm_construct = rt5677_spi_pcm_new,
};
/* Select a suitable transfer command for the next transfer to ensure
* the transfer address is always naturally aligned while minimizing
* the total number of transfers required.
*
* 3 transfer commands are available:
* RT5677_SPI_READ/WRITE_16: Transfer 2 bytes
* RT5677_SPI_READ/WRITE_32: Transfer 4 bytes
* RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes
*
* Note:
* 16 Bit writes and reads are restricted to the address range
* 0x18020000 ~ 0x18021000
*
* For example, reading 256 bytes at 0x60030004 uses the following commands:
* 0x60030004 RT5677_SPI_READ_32 4 bytes
* 0x60030008 RT5677_SPI_READ_BURST 240 bytes
* 0x600300F8 RT5677_SPI_READ_BURST 8 bytes
* 0x60030100 RT5677_SPI_READ_32 4 bytes
*
* Input:
* @read: true for read commands; false for write commands
* @align: alignment of the next transfer address
* @remain: number of bytes remaining to transfer
*
* Output:
* @len: number of bytes to transfer with the selected command
* Returns the selected command
*/
static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
{
u8 cmd;
if (align == 4 || remain <= 4) {
cmd = RT5677_SPI_READ_32;
*len = 4;
} else {
cmd = RT5677_SPI_READ_BURST;
*len = (((remain - 1) >> 3) + 1) << 3;
*len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
}
return read ? cmd : cmd + 1;
}
/* Copy dstlen bytes from src to dst, while reversing byte order for each word.
* If srclen < dstlen, zeros are padded.
*/
static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
{
u32 w, i, si;
u32 word_size = min_t(u32, dstlen, 8);
for (w = 0; w < dstlen; w += word_size) {
for (i = 0; i < word_size && i + w < dstlen; i++) {
si = w + word_size - i - 1;
dst[w + i] = si < srclen ? src[si] : 0;
}
}
}
/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
{
u32 offset;
int status = 0;
struct spi_transfer t[2];
struct spi_message m;
/* +4 bytes is for the DummyPhase following the AddressPhase */
u8 header[RT5677_SPI_HEADER + 4];
u8 body[RT5677_SPI_BURST_LEN];
u8 spi_cmd;
u8 *cb = rxbuf;
if (!g_spi)
return -ENODEV;
if ((addr & 3) || (len & 3)) {
dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
return -EACCES;
}
memset(t, 0, sizeof(t));
t[0].tx_buf = header;
t[0].len = sizeof(header);
t[0].speed_hz = RT5677_SPI_FREQ;
t[1].rx_buf = body;
t[1].speed_hz = RT5677_SPI_FREQ;
spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
for (offset = 0; offset < len; offset += t[1].len) {
spi_cmd = rt5677_spi_select_cmd(true, (addr + offset) & 7,
len - offset, &t[1].len);
/* Construct SPI message header */
header[0] = spi_cmd;
header[1] = ((addr + offset) & 0xff000000) >> 24;
header[2] = ((addr + offset) & 0x00ff0000) >> 16;
header[3] = ((addr + offset) & 0x0000ff00) >> 8;
header[4] = ((addr + offset) & 0x000000ff) >> 0;
mutex_lock(&spi_mutex);
status |= spi_sync(g_spi, &m);
mutex_unlock(&spi_mutex);
/* Copy data back to caller buffer */
rt5677_spi_reverse(cb + offset, len - offset, body, t[1].len);
}
return status;
}
EXPORT_SYMBOL_GPL(rt5677_spi_read);
/* Write DSP address space using SPI. addr has to be 4-byte aligned.
* If len is not 4-byte aligned, then extra zeros are written at the end
* as padding.
*/
int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
{
u32 offset;
int status = 0;
struct spi_transfer t;
struct spi_message m;
/* +1 byte is for the DummyPhase following the DataPhase */
u8 buf[RT5677_SPI_HEADER + RT5677_SPI_BURST_LEN + 1];
u8 *body = buf + RT5677_SPI_HEADER;
u8 spi_cmd;
const u8 *cb = txbuf;
if (!g_spi)
return -ENODEV;
if (addr & 3) {
dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
return -EACCES;
}
memset(&t, 0, sizeof(t));
t.tx_buf = buf;
t.speed_hz = RT5677_SPI_FREQ;
spi_message_init_with_transfers(&m, &t, 1);
for (offset = 0; offset < len;) {
spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
len - offset, &t.len);
/* Construct SPI message header */
buf[0] = spi_cmd;
buf[1] = ((addr + offset) & 0xff000000) >> 24;
buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
buf[4] = ((addr + offset) & 0x000000ff) >> 0;
/* Fetch data from caller buffer */
rt5677_spi_reverse(body, t.len, cb + offset, len - offset);
offset += t.len;
t.len += RT5677_SPI_HEADER + 1;
mutex_lock(&spi_mutex);
status |= spi_sync(g_spi, &m);
mutex_unlock(&spi_mutex);
}
return status;
}
EXPORT_SYMBOL_GPL(rt5677_spi_write);
int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw)
{
return rt5677_spi_write(addr, fw->data, fw->size);
}
EXPORT_SYMBOL_GPL(rt5677_spi_write_firmware);
void rt5677_spi_hotword_detected(void)
{
struct rt5677_dsp *rt5677_dsp;
if (!g_spi)
return;
rt5677_dsp = dev_get_drvdata(&g_spi->dev);
if (!rt5677_dsp) {
dev_err(&g_spi->dev, "Can't get rt5677_dsp\n");
return;
}
mutex_lock(&rt5677_dsp->dma_lock);
dev_info(rt5677_dsp->dev, "Hotword detected\n");
rt5677_dsp->new_hotword = true;
mutex_unlock(&rt5677_dsp->dma_lock);
schedule_delayed_work(&rt5677_dsp->copy_work, 0);
}
EXPORT_SYMBOL_GPL(rt5677_spi_hotword_detected);
static int rt5677_spi_probe(struct spi_device *spi)
{
int ret;
g_spi = spi;
ret = snd_soc_register_component(&spi->dev, &rt5677_spi_dai_component,
&rt5677_spi_dai, 1);
if (ret < 0)
dev_err(&spi->dev, "Failed to register component.\n");
return ret;
}
static int rt5677_spi_remove(struct spi_device *spi)
{
snd_soc_unregister_component(&spi->dev);
return 0;
}
static const struct acpi_device_id rt5677_spi_acpi_id[] = {
{ "RT5677AA", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id);
static struct spi_driver rt5677_spi_driver = {
.driver = {
.name = DRV_NAME,
.acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id),
},
.probe = rt5677_spi_probe,
.remove = rt5677_spi_remove,
};
module_spi_driver(rt5677_spi_driver);
MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
MODULE_LICENSE("GPL v2");