| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PCI Message Signaled Interrupt (MSI) |
| * |
| * Copyright (C) 2003-2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| * Copyright (C) 2016 Christoph Hellwig. |
| */ |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/irq.h> |
| |
| #include "../pci.h" |
| #include "msi.h" |
| |
| static int pci_msi_enable = 1; |
| int pci_msi_ignore_mask; |
| |
| static noinline void pci_msi_update_mask(struct msi_desc *desc, u32 clear, u32 set) |
| { |
| raw_spinlock_t *lock = &to_pci_dev(desc->dev)->msi_lock; |
| unsigned long flags; |
| |
| if (!desc->pci.msi_attrib.can_mask) |
| return; |
| |
| raw_spin_lock_irqsave(lock, flags); |
| desc->pci.msi_mask &= ~clear; |
| desc->pci.msi_mask |= set; |
| pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->pci.mask_pos, |
| desc->pci.msi_mask); |
| raw_spin_unlock_irqrestore(lock, flags); |
| } |
| |
| static inline void pci_msi_mask(struct msi_desc *desc, u32 mask) |
| { |
| pci_msi_update_mask(desc, 0, mask); |
| } |
| |
| static inline void pci_msi_unmask(struct msi_desc *desc, u32 mask) |
| { |
| pci_msi_update_mask(desc, mask, 0); |
| } |
| |
| static inline void __iomem *pci_msix_desc_addr(struct msi_desc *desc) |
| { |
| return desc->pci.mask_base + desc->msi_index * PCI_MSIX_ENTRY_SIZE; |
| } |
| |
| /* |
| * This internal function does not flush PCI writes to the device. All |
| * users must ensure that they read from the device before either assuming |
| * that the device state is up to date, or returning out of this file. |
| * It does not affect the msi_desc::msix_ctrl cache either. Use with care! |
| */ |
| static void pci_msix_write_vector_ctrl(struct msi_desc *desc, u32 ctrl) |
| { |
| void __iomem *desc_addr = pci_msix_desc_addr(desc); |
| |
| if (desc->pci.msi_attrib.can_mask) |
| writel(ctrl, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| } |
| |
| static inline void pci_msix_mask(struct msi_desc *desc) |
| { |
| desc->pci.msix_ctrl |= PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| pci_msix_write_vector_ctrl(desc, desc->pci.msix_ctrl); |
| /* Flush write to device */ |
| readl(desc->pci.mask_base); |
| } |
| |
| static inline void pci_msix_unmask(struct msi_desc *desc) |
| { |
| desc->pci.msix_ctrl &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| pci_msix_write_vector_ctrl(desc, desc->pci.msix_ctrl); |
| } |
| |
| static void __pci_msi_mask_desc(struct msi_desc *desc, u32 mask) |
| { |
| if (desc->pci.msi_attrib.is_msix) |
| pci_msix_mask(desc); |
| else |
| pci_msi_mask(desc, mask); |
| } |
| |
| static void __pci_msi_unmask_desc(struct msi_desc *desc, u32 mask) |
| { |
| if (desc->pci.msi_attrib.is_msix) |
| pci_msix_unmask(desc); |
| else |
| pci_msi_unmask(desc, mask); |
| } |
| |
| /** |
| * pci_msi_mask_irq - Generic IRQ chip callback to mask PCI/MSI interrupts |
| * @data: pointer to irqdata associated to that interrupt |
| */ |
| void pci_msi_mask_irq(struct irq_data *data) |
| { |
| struct msi_desc *desc = irq_data_get_msi_desc(data); |
| |
| __pci_msi_mask_desc(desc, BIT(data->irq - desc->irq)); |
| } |
| EXPORT_SYMBOL_GPL(pci_msi_mask_irq); |
| |
| /** |
| * pci_msi_unmask_irq - Generic IRQ chip callback to unmask PCI/MSI interrupts |
| * @data: pointer to irqdata associated to that interrupt |
| */ |
| void pci_msi_unmask_irq(struct irq_data *data) |
| { |
| struct msi_desc *desc = irq_data_get_msi_desc(data); |
| |
| __pci_msi_unmask_desc(desc, BIT(data->irq - desc->irq)); |
| } |
| EXPORT_SYMBOL_GPL(pci_msi_unmask_irq); |
| |
| void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| struct pci_dev *dev = msi_desc_to_pci_dev(entry); |
| |
| BUG_ON(dev->current_state != PCI_D0); |
| |
| if (entry->pci.msi_attrib.is_msix) { |
| void __iomem *base = pci_msix_desc_addr(entry); |
| |
| if (WARN_ON_ONCE(entry->pci.msi_attrib.is_virtual)) |
| return; |
| |
| msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| msg->data = readl(base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| int pos = dev->msi_cap; |
| u16 data; |
| |
| pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, |
| &msg->address_lo); |
| if (entry->pci.msi_attrib.is_64) { |
| pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, |
| &msg->address_hi); |
| pci_read_config_word(dev, pos + PCI_MSI_DATA_64, &data); |
| } else { |
| msg->address_hi = 0; |
| pci_read_config_word(dev, pos + PCI_MSI_DATA_32, &data); |
| } |
| msg->data = data; |
| } |
| } |
| |
| void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| struct pci_dev *dev = msi_desc_to_pci_dev(entry); |
| |
| if (dev->current_state != PCI_D0 || pci_dev_is_disconnected(dev)) { |
| /* Don't touch the hardware now */ |
| } else if (entry->pci.msi_attrib.is_msix) { |
| void __iomem *base = pci_msix_desc_addr(entry); |
| u32 ctrl = entry->pci.msix_ctrl; |
| bool unmasked = !(ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| if (entry->pci.msi_attrib.is_virtual) |
| goto skip; |
| |
| /* |
| * The specification mandates that the entry is masked |
| * when the message is modified: |
| * |
| * "If software changes the Address or Data value of an |
| * entry while the entry is unmasked, the result is |
| * undefined." |
| */ |
| if (unmasked) |
| pci_msix_write_vector_ctrl(entry, ctrl | PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| writel(msg->data, base + PCI_MSIX_ENTRY_DATA); |
| |
| if (unmasked) |
| pci_msix_write_vector_ctrl(entry, ctrl); |
| |
| /* Ensure that the writes are visible in the device */ |
| readl(base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| int pos = dev->msi_cap; |
| u16 msgctl; |
| |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); |
| msgctl &= ~PCI_MSI_FLAGS_QSIZE; |
| msgctl |= entry->pci.msi_attrib.multiple << 4; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, msgctl); |
| |
| pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, |
| msg->address_lo); |
| if (entry->pci.msi_attrib.is_64) { |
| pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, |
| msg->address_hi); |
| pci_write_config_word(dev, pos + PCI_MSI_DATA_64, |
| msg->data); |
| } else { |
| pci_write_config_word(dev, pos + PCI_MSI_DATA_32, |
| msg->data); |
| } |
| /* Ensure that the writes are visible in the device */ |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); |
| } |
| |
| skip: |
| entry->msg = *msg; |
| |
| if (entry->write_msi_msg) |
| entry->write_msi_msg(entry, entry->write_msi_msg_data); |
| |
| } |
| |
| void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| |
| __pci_write_msi_msg(entry, msg); |
| } |
| EXPORT_SYMBOL_GPL(pci_write_msi_msg); |
| |
| static void free_msi_irqs(struct pci_dev *dev) |
| { |
| pci_msi_teardown_msi_irqs(dev); |
| |
| if (dev->msix_base) { |
| iounmap(dev->msix_base); |
| dev->msix_base = NULL; |
| } |
| } |
| |
| static void pci_intx_for_msi(struct pci_dev *dev, int enable) |
| { |
| if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) |
| pci_intx(dev, enable); |
| } |
| |
| static void pci_msi_set_enable(struct pci_dev *dev, int enable) |
| { |
| u16 control; |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); |
| control &= ~PCI_MSI_FLAGS_ENABLE; |
| if (enable) |
| control |= PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); |
| } |
| |
| /* |
| * Architecture override returns true when the PCI MSI message should be |
| * written by the generic restore function. |
| */ |
| bool __weak arch_restore_msi_irqs(struct pci_dev *dev) |
| { |
| return true; |
| } |
| |
| static void __pci_restore_msi_state(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| u16 control; |
| |
| if (!dev->msi_enabled) |
| return; |
| |
| entry = irq_get_msi_desc(dev->irq); |
| |
| pci_intx_for_msi(dev, 0); |
| pci_msi_set_enable(dev, 0); |
| if (arch_restore_msi_irqs(dev)) |
| __pci_write_msi_msg(entry, &entry->msg); |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); |
| pci_msi_update_mask(entry, 0, 0); |
| control &= ~PCI_MSI_FLAGS_QSIZE; |
| control |= (entry->pci.msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); |
| } |
| |
| static void pci_msix_clear_and_set_ctrl(struct pci_dev *dev, u16 clear, u16 set) |
| { |
| u16 ctrl; |
| |
| pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &ctrl); |
| ctrl &= ~clear; |
| ctrl |= set; |
| pci_write_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, ctrl); |
| } |
| |
| static void __pci_restore_msix_state(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| bool write_msg; |
| |
| if (!dev->msix_enabled) |
| return; |
| |
| /* route the table */ |
| pci_intx_for_msi(dev, 0); |
| pci_msix_clear_and_set_ctrl(dev, 0, |
| PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL); |
| |
| write_msg = arch_restore_msi_irqs(dev); |
| |
| msi_lock_descs(&dev->dev); |
| msi_for_each_desc(entry, &dev->dev, MSI_DESC_ALL) { |
| if (write_msg) |
| __pci_write_msi_msg(entry, &entry->msg); |
| pci_msix_write_vector_ctrl(entry, entry->pci.msix_ctrl); |
| } |
| msi_unlock_descs(&dev->dev); |
| |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); |
| } |
| |
| void pci_restore_msi_state(struct pci_dev *dev) |
| { |
| __pci_restore_msi_state(dev); |
| __pci_restore_msix_state(dev); |
| } |
| EXPORT_SYMBOL_GPL(pci_restore_msi_state); |
| |
| static void pcim_msi_release(void *pcidev) |
| { |
| struct pci_dev *dev = pcidev; |
| |
| dev->is_msi_managed = false; |
| pci_free_irq_vectors(dev); |
| } |
| |
| /* |
| * Needs to be separate from pcim_release to prevent an ordering problem |
| * vs. msi_device_data_release() in the MSI core code. |
| */ |
| static int pcim_setup_msi_release(struct pci_dev *dev) |
| { |
| int ret; |
| |
| if (!pci_is_managed(dev) || dev->is_msi_managed) |
| return 0; |
| |
| ret = devm_add_action(&dev->dev, pcim_msi_release, dev); |
| if (!ret) |
| dev->is_msi_managed = true; |
| return ret; |
| } |
| |
| /* |
| * Ordering vs. devres: msi device data has to be installed first so that |
| * pcim_msi_release() is invoked before it on device release. |
| */ |
| static int pci_setup_msi_context(struct pci_dev *dev) |
| { |
| int ret = msi_setup_device_data(&dev->dev); |
| |
| if (!ret) |
| ret = pcim_setup_msi_release(dev); |
| return ret; |
| } |
| |
| static int msi_setup_msi_desc(struct pci_dev *dev, int nvec, |
| struct irq_affinity_desc *masks) |
| { |
| struct msi_desc desc; |
| u16 control; |
| |
| /* MSI Entry Initialization */ |
| memset(&desc, 0, sizeof(desc)); |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); |
| /* Lies, damned lies, and MSIs */ |
| if (dev->dev_flags & PCI_DEV_FLAGS_HAS_MSI_MASKING) |
| control |= PCI_MSI_FLAGS_MASKBIT; |
| /* Respect XEN's mask disabling */ |
| if (pci_msi_ignore_mask) |
| control &= ~PCI_MSI_FLAGS_MASKBIT; |
| |
| desc.nvec_used = nvec; |
| desc.pci.msi_attrib.is_64 = !!(control & PCI_MSI_FLAGS_64BIT); |
| desc.pci.msi_attrib.can_mask = !!(control & PCI_MSI_FLAGS_MASKBIT); |
| desc.pci.msi_attrib.default_irq = dev->irq; |
| desc.pci.msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1; |
| desc.pci.msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec)); |
| desc.affinity = masks; |
| |
| if (control & PCI_MSI_FLAGS_64BIT) |
| desc.pci.mask_pos = dev->msi_cap + PCI_MSI_MASK_64; |
| else |
| desc.pci.mask_pos = dev->msi_cap + PCI_MSI_MASK_32; |
| |
| /* Save the initial mask status */ |
| if (desc.pci.msi_attrib.can_mask) |
| pci_read_config_dword(dev, desc.pci.mask_pos, &desc.pci.msi_mask); |
| |
| return msi_add_msi_desc(&dev->dev, &desc); |
| } |
| |
| static int msi_verify_entries(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!dev->no_64bit_msi) |
| return 0; |
| |
| msi_for_each_desc(entry, &dev->dev, MSI_DESC_ALL) { |
| if (entry->msg.address_hi) { |
| pci_err(dev, "arch assigned 64-bit MSI address %#x%08x but device only supports 32 bits\n", |
| entry->msg.address_hi, entry->msg.address_lo); |
| break; |
| } |
| } |
| return !entry ? 0 : -EIO; |
| } |
| |
| /** |
| * msi_capability_init - configure device's MSI capability structure |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: number of interrupts to allocate |
| * @affd: description of automatic IRQ affinity assignments (may be %NULL) |
| * |
| * Setup the MSI capability structure of the device with the requested |
| * number of interrupts. A return value of zero indicates the successful |
| * setup of an entry with the new MSI IRQ. A negative return value indicates |
| * an error, and a positive return value indicates the number of interrupts |
| * which could have been allocated. |
| */ |
| static int msi_capability_init(struct pci_dev *dev, int nvec, |
| struct irq_affinity *affd) |
| { |
| struct irq_affinity_desc *masks = NULL; |
| struct msi_desc *entry; |
| int ret; |
| |
| /* |
| * Disable MSI during setup in the hardware, but mark it enabled |
| * so that setup code can evaluate it. |
| */ |
| pci_msi_set_enable(dev, 0); |
| dev->msi_enabled = 1; |
| |
| if (affd) |
| masks = irq_create_affinity_masks(nvec, affd); |
| |
| msi_lock_descs(&dev->dev); |
| ret = msi_setup_msi_desc(dev, nvec, masks); |
| if (ret) |
| goto fail; |
| |
| /* All MSIs are unmasked by default; mask them all */ |
| entry = msi_first_desc(&dev->dev, MSI_DESC_ALL); |
| pci_msi_mask(entry, msi_multi_mask(entry)); |
| |
| /* Configure MSI capability structure */ |
| ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); |
| if (ret) |
| goto err; |
| |
| ret = msi_verify_entries(dev); |
| if (ret) |
| goto err; |
| |
| /* Set MSI enabled bits */ |
| pci_intx_for_msi(dev, 0); |
| pci_msi_set_enable(dev, 1); |
| |
| pcibios_free_irq(dev); |
| dev->irq = entry->irq; |
| goto unlock; |
| |
| err: |
| pci_msi_unmask(entry, msi_multi_mask(entry)); |
| free_msi_irqs(dev); |
| fail: |
| dev->msi_enabled = 0; |
| unlock: |
| msi_unlock_descs(&dev->dev); |
| kfree(masks); |
| return ret; |
| } |
| |
| static void __iomem *msix_map_region(struct pci_dev *dev, |
| unsigned int nr_entries) |
| { |
| resource_size_t phys_addr; |
| u32 table_offset; |
| unsigned long flags; |
| u8 bir; |
| |
| pci_read_config_dword(dev, dev->msix_cap + PCI_MSIX_TABLE, |
| &table_offset); |
| bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR); |
| flags = pci_resource_flags(dev, bir); |
| if (!flags || (flags & IORESOURCE_UNSET)) |
| return NULL; |
| |
| table_offset &= PCI_MSIX_TABLE_OFFSET; |
| phys_addr = pci_resource_start(dev, bir) + table_offset; |
| |
| return ioremap(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); |
| } |
| |
| static int msix_setup_msi_descs(struct pci_dev *dev, void __iomem *base, |
| struct msix_entry *entries, int nvec, |
| struct irq_affinity_desc *masks) |
| { |
| int ret = 0, i, vec_count = pci_msix_vec_count(dev); |
| struct irq_affinity_desc *curmsk; |
| struct msi_desc desc; |
| void __iomem *addr; |
| |
| memset(&desc, 0, sizeof(desc)); |
| |
| desc.nvec_used = 1; |
| desc.pci.msi_attrib.is_msix = 1; |
| desc.pci.msi_attrib.is_64 = 1; |
| desc.pci.msi_attrib.default_irq = dev->irq; |
| desc.pci.mask_base = base; |
| |
| for (i = 0, curmsk = masks; i < nvec; i++, curmsk++) { |
| desc.msi_index = entries ? entries[i].entry : i; |
| desc.affinity = masks ? curmsk : NULL; |
| desc.pci.msi_attrib.is_virtual = desc.msi_index >= vec_count; |
| desc.pci.msi_attrib.can_mask = !pci_msi_ignore_mask && |
| !desc.pci.msi_attrib.is_virtual; |
| |
| if (!desc.pci.msi_attrib.can_mask) { |
| addr = pci_msix_desc_addr(&desc); |
| desc.pci.msix_ctrl = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| } |
| |
| ret = msi_add_msi_desc(&dev->dev, &desc); |
| if (ret) |
| break; |
| } |
| return ret; |
| } |
| |
| static void msix_update_entries(struct pci_dev *dev, struct msix_entry *entries) |
| { |
| struct msi_desc *desc; |
| |
| if (entries) { |
| msi_for_each_desc(desc, &dev->dev, MSI_DESC_ALL) { |
| entries->vector = desc->irq; |
| entries++; |
| } |
| } |
| } |
| |
| static void msix_mask_all(void __iomem *base, int tsize) |
| { |
| u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| int i; |
| |
| if (pci_msi_ignore_mask) |
| return; |
| |
| for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE) |
| writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| } |
| |
| static int msix_setup_interrupts(struct pci_dev *dev, void __iomem *base, |
| struct msix_entry *entries, int nvec, |
| struct irq_affinity *affd) |
| { |
| struct irq_affinity_desc *masks = NULL; |
| int ret; |
| |
| if (affd) |
| masks = irq_create_affinity_masks(nvec, affd); |
| |
| msi_lock_descs(&dev->dev); |
| ret = msix_setup_msi_descs(dev, base, entries, nvec, masks); |
| if (ret) |
| goto out_free; |
| |
| ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); |
| if (ret) |
| goto out_free; |
| |
| /* Check if all MSI entries honor device restrictions */ |
| ret = msi_verify_entries(dev); |
| if (ret) |
| goto out_free; |
| |
| msix_update_entries(dev, entries); |
| goto out_unlock; |
| |
| out_free: |
| free_msi_irqs(dev); |
| out_unlock: |
| msi_unlock_descs(&dev->dev); |
| kfree(masks); |
| return ret; |
| } |
| |
| /** |
| * msix_capability_init - configure device's MSI-X capability |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of struct msix_entry entries |
| * @nvec: number of @entries |
| * @affd: Optional pointer to enable automatic affinity assignment |
| * |
| * Setup the MSI-X capability structure of device function with a |
| * single MSI-X IRQ. A return of zero indicates the successful setup of |
| * requested MSI-X entries with allocated IRQs or non-zero for otherwise. |
| **/ |
| static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, |
| int nvec, struct irq_affinity *affd) |
| { |
| void __iomem *base; |
| int ret, tsize; |
| u16 control; |
| |
| /* |
| * Some devices require MSI-X to be enabled before the MSI-X |
| * registers can be accessed. Mask all the vectors to prevent |
| * interrupts coming in before they're fully set up. |
| */ |
| pci_msix_clear_and_set_ctrl(dev, 0, PCI_MSIX_FLAGS_MASKALL | |
| PCI_MSIX_FLAGS_ENABLE); |
| |
| /* Mark it enabled so setup functions can query it */ |
| dev->msix_enabled = 1; |
| |
| pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); |
| /* Request & Map MSI-X table region */ |
| tsize = msix_table_size(control); |
| base = msix_map_region(dev, tsize); |
| if (!base) { |
| ret = -ENOMEM; |
| goto out_disable; |
| } |
| |
| dev->msix_base = base; |
| |
| ret = msix_setup_interrupts(dev, base, entries, nvec, affd); |
| if (ret) |
| goto out_disable; |
| |
| /* Disable INTX */ |
| pci_intx_for_msi(dev, 0); |
| |
| /* |
| * Ensure that all table entries are masked to prevent |
| * stale entries from firing in a crash kernel. |
| * |
| * Done late to deal with a broken Marvell NVME device |
| * which takes the MSI-X mask bits into account even |
| * when MSI-X is disabled, which prevents MSI delivery. |
| */ |
| msix_mask_all(base, tsize); |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); |
| |
| pcibios_free_irq(dev); |
| return 0; |
| |
| out_disable: |
| dev->msix_enabled = 0; |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * pci_msi_supported - check whether MSI may be enabled on a device |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: how many MSIs have been requested? |
| * |
| * Look at global flags, the device itself, and its parent buses |
| * to determine if MSI/-X are supported for the device. If MSI/-X is |
| * supported return 1, else return 0. |
| **/ |
| static int pci_msi_supported(struct pci_dev *dev, int nvec) |
| { |
| struct pci_bus *bus; |
| |
| /* MSI must be globally enabled and supported by the device */ |
| if (!pci_msi_enable) |
| return 0; |
| |
| if (!dev || dev->no_msi) |
| return 0; |
| |
| /* |
| * You can't ask to have 0 or less MSIs configured. |
| * a) it's stupid .. |
| * b) the list manipulation code assumes nvec >= 1. |
| */ |
| if (nvec < 1) |
| return 0; |
| |
| /* |
| * Any bridge which does NOT route MSI transactions from its |
| * secondary bus to its primary bus must set NO_MSI flag on |
| * the secondary pci_bus. |
| * |
| * The NO_MSI flag can either be set directly by: |
| * - arch-specific PCI host bus controller drivers (deprecated) |
| * - quirks for specific PCI bridges |
| * |
| * or indirectly by platform-specific PCI host bridge drivers by |
| * advertising the 'msi_domain' property, which results in |
| * the NO_MSI flag when no MSI domain is found for this bridge |
| * at probe time. |
| */ |
| for (bus = dev->bus; bus; bus = bus->parent) |
| if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) |
| return 0; |
| |
| return 1; |
| } |
| |
| /** |
| * pci_msi_vec_count - Return the number of MSI vectors a device can send |
| * @dev: device to report about |
| * |
| * This function returns the number of MSI vectors a device requested via |
| * Multiple Message Capable register. It returns a negative errno if the |
| * device is not capable sending MSI interrupts. Otherwise, the call succeeds |
| * and returns a power of two, up to a maximum of 2^5 (32), according to the |
| * MSI specification. |
| **/ |
| int pci_msi_vec_count(struct pci_dev *dev) |
| { |
| int ret; |
| u16 msgctl; |
| |
| if (!dev->msi_cap) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl); |
| ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pci_msi_vec_count); |
| |
| static void pci_msi_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *desc; |
| |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| pci_msi_set_enable(dev, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msi_enabled = 0; |
| |
| /* Return the device with MSI unmasked as initial states */ |
| desc = msi_first_desc(&dev->dev, MSI_DESC_ALL); |
| if (!WARN_ON_ONCE(!desc)) |
| pci_msi_unmask(desc, msi_multi_mask(desc)); |
| |
| /* Restore dev->irq to its default pin-assertion IRQ */ |
| dev->irq = desc->pci.msi_attrib.default_irq; |
| pcibios_alloc_irq(dev); |
| } |
| |
| void pci_disable_msi(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| msi_lock_descs(&dev->dev); |
| pci_msi_shutdown(dev); |
| free_msi_irqs(dev); |
| msi_unlock_descs(&dev->dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msi); |
| |
| /** |
| * pci_msix_vec_count - return the number of device's MSI-X table entries |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * This function returns the number of device's MSI-X table entries and |
| * therefore the number of MSI-X vectors device is capable of sending. |
| * It returns a negative errno if the device is not capable of sending MSI-X |
| * interrupts. |
| **/ |
| int pci_msix_vec_count(struct pci_dev *dev) |
| { |
| u16 control; |
| |
| if (!dev->msix_cap) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); |
| return msix_table_size(control); |
| } |
| EXPORT_SYMBOL(pci_msix_vec_count); |
| |
| static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, |
| int nvec, struct irq_affinity *affd, int flags) |
| { |
| int nr_entries; |
| int i, j; |
| |
| if (!pci_msi_supported(dev, nvec) || dev->current_state != PCI_D0) |
| return -EINVAL; |
| |
| nr_entries = pci_msix_vec_count(dev); |
| if (nr_entries < 0) |
| return nr_entries; |
| if (nvec > nr_entries && !(flags & PCI_IRQ_VIRTUAL)) |
| return nr_entries; |
| |
| if (entries) { |
| /* Check for any invalid entries */ |
| for (i = 0; i < nvec; i++) { |
| if (entries[i].entry >= nr_entries) |
| return -EINVAL; /* invalid entry */ |
| for (j = i + 1; j < nvec; j++) { |
| if (entries[i].entry == entries[j].entry) |
| return -EINVAL; /* duplicate entry */ |
| } |
| } |
| } |
| |
| /* Check whether driver already requested for MSI IRQ */ |
| if (dev->msi_enabled) { |
| pci_info(dev, "can't enable MSI-X (MSI IRQ already assigned)\n"); |
| return -EINVAL; |
| } |
| return msix_capability_init(dev, entries, nvec, affd); |
| } |
| |
| static void pci_msix_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *desc; |
| |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| if (pci_dev_is_disconnected(dev)) { |
| dev->msix_enabled = 0; |
| return; |
| } |
| |
| /* Return the device with MSI-X masked as initial states */ |
| msi_for_each_desc(desc, &dev->dev, MSI_DESC_ALL) |
| pci_msix_mask(desc); |
| |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msix_enabled = 0; |
| pcibios_alloc_irq(dev); |
| } |
| |
| void pci_disable_msix(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| msi_lock_descs(&dev->dev); |
| pci_msix_shutdown(dev); |
| free_msi_irqs(dev); |
| msi_unlock_descs(&dev->dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msix); |
| |
| static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, |
| struct irq_affinity *affd) |
| { |
| int nvec; |
| int rc; |
| |
| if (!pci_msi_supported(dev, minvec) || dev->current_state != PCI_D0) |
| return -EINVAL; |
| |
| /* Check whether driver already requested MSI-X IRQs */ |
| if (dev->msix_enabled) { |
| pci_info(dev, "can't enable MSI (MSI-X already enabled)\n"); |
| return -EINVAL; |
| } |
| |
| if (maxvec < minvec) |
| return -ERANGE; |
| |
| if (WARN_ON_ONCE(dev->msi_enabled)) |
| return -EINVAL; |
| |
| nvec = pci_msi_vec_count(dev); |
| if (nvec < 0) |
| return nvec; |
| if (nvec < minvec) |
| return -ENOSPC; |
| |
| if (nvec > maxvec) |
| nvec = maxvec; |
| |
| rc = pci_setup_msi_context(dev); |
| if (rc) |
| return rc; |
| |
| for (;;) { |
| if (affd) { |
| nvec = irq_calc_affinity_vectors(minvec, nvec, affd); |
| if (nvec < minvec) |
| return -ENOSPC; |
| } |
| |
| rc = msi_capability_init(dev, nvec, affd); |
| if (rc == 0) |
| return nvec; |
| |
| if (rc < 0) |
| return rc; |
| if (rc < minvec) |
| return -ENOSPC; |
| |
| nvec = rc; |
| } |
| } |
| |
| /* deprecated, don't use */ |
| int pci_enable_msi(struct pci_dev *dev) |
| { |
| int rc = __pci_enable_msi_range(dev, 1, 1, NULL); |
| if (rc < 0) |
| return rc; |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_enable_msi); |
| |
| static int __pci_enable_msix_range(struct pci_dev *dev, |
| struct msix_entry *entries, int minvec, |
| int maxvec, struct irq_affinity *affd, |
| int flags) |
| { |
| int rc, nvec = maxvec; |
| |
| if (maxvec < minvec) |
| return -ERANGE; |
| |
| if (WARN_ON_ONCE(dev->msix_enabled)) |
| return -EINVAL; |
| |
| rc = pci_setup_msi_context(dev); |
| if (rc) |
| return rc; |
| |
| for (;;) { |
| if (affd) { |
| nvec = irq_calc_affinity_vectors(minvec, nvec, affd); |
| if (nvec < minvec) |
| return -ENOSPC; |
| } |
| |
| rc = __pci_enable_msix(dev, entries, nvec, affd, flags); |
| if (rc == 0) |
| return nvec; |
| |
| if (rc < 0) |
| return rc; |
| if (rc < minvec) |
| return -ENOSPC; |
| |
| nvec = rc; |
| } |
| } |
| |
| /** |
| * pci_enable_msix_range - configure device's MSI-X capability structure |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of MSI-X entries |
| * @minvec: minimum number of MSI-X IRQs requested |
| * @maxvec: maximum number of MSI-X IRQs requested |
| * |
| * Setup the MSI-X capability structure of device function with a maximum |
| * possible number of interrupts in the range between @minvec and @maxvec |
| * upon its software driver call to request for MSI-X mode enabled on its |
| * hardware device function. It returns a negative errno if an error occurs. |
| * If it succeeds, it returns the actual number of interrupts allocated and |
| * indicates the successful configuration of MSI-X capability structure |
| * with new allocated MSI-X interrupts. |
| **/ |
| int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, |
| int minvec, int maxvec) |
| { |
| return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0); |
| } |
| EXPORT_SYMBOL(pci_enable_msix_range); |
| |
| /** |
| * pci_alloc_irq_vectors_affinity - allocate multiple IRQs for a device |
| * @dev: PCI device to operate on |
| * @min_vecs: minimum number of vectors required (must be >= 1) |
| * @max_vecs: maximum (desired) number of vectors |
| * @flags: flags or quirks for the allocation |
| * @affd: optional description of the affinity requirements |
| * |
| * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI |
| * vectors if available, and fall back to a single legacy vector |
| * if neither is available. Return the number of vectors allocated, |
| * (which might be smaller than @max_vecs) if successful, or a negative |
| * error code on error. If less than @min_vecs interrupt vectors are |
| * available for @dev the function will fail with -ENOSPC. |
| * |
| * To get the Linux IRQ number used for a vector that can be passed to |
| * request_irq() use the pci_irq_vector() helper. |
| */ |
| int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, |
| unsigned int max_vecs, unsigned int flags, |
| struct irq_affinity *affd) |
| { |
| struct irq_affinity msi_default_affd = {0}; |
| int nvecs = -ENOSPC; |
| |
| if (flags & PCI_IRQ_AFFINITY) { |
| if (!affd) |
| affd = &msi_default_affd; |
| } else { |
| if (WARN_ON(affd)) |
| affd = NULL; |
| } |
| |
| if (flags & PCI_IRQ_MSIX) { |
| nvecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs, |
| affd, flags); |
| if (nvecs > 0) |
| return nvecs; |
| } |
| |
| if (flags & PCI_IRQ_MSI) { |
| nvecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd); |
| if (nvecs > 0) |
| return nvecs; |
| } |
| |
| /* use legacy IRQ if allowed */ |
| if (flags & PCI_IRQ_LEGACY) { |
| if (min_vecs == 1 && dev->irq) { |
| /* |
| * Invoke the affinity spreading logic to ensure that |
| * the device driver can adjust queue configuration |
| * for the single interrupt case. |
| */ |
| if (affd) |
| irq_create_affinity_masks(1, affd); |
| pci_intx(dev, 1); |
| return 1; |
| } |
| } |
| |
| return nvecs; |
| } |
| EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity); |
| |
| /** |
| * pci_free_irq_vectors - free previously allocated IRQs for a device |
| * @dev: PCI device to operate on |
| * |
| * Undoes the allocations and enabling in pci_alloc_irq_vectors(). |
| */ |
| void pci_free_irq_vectors(struct pci_dev *dev) |
| { |
| pci_disable_msix(dev); |
| pci_disable_msi(dev); |
| } |
| EXPORT_SYMBOL(pci_free_irq_vectors); |
| |
| /** |
| * pci_irq_vector - return Linux IRQ number of a device vector |
| * @dev: PCI device to operate on |
| * @nr: Interrupt vector index (0-based) |
| * |
| * @nr has the following meanings depending on the interrupt mode: |
| * MSI-X: The index in the MSI-X vector table |
| * MSI: The index of the enabled MSI vectors |
| * INTx: Must be 0 |
| * |
| * Return: The Linux interrupt number or -EINVAl if @nr is out of range. |
| */ |
| int pci_irq_vector(struct pci_dev *dev, unsigned int nr) |
| { |
| unsigned int irq; |
| |
| if (!dev->msi_enabled && !dev->msix_enabled) |
| return !nr ? dev->irq : -EINVAL; |
| |
| irq = msi_get_virq(&dev->dev, nr); |
| return irq ? irq : -EINVAL; |
| } |
| EXPORT_SYMBOL(pci_irq_vector); |
| |
| /** |
| * pci_irq_get_affinity - return the affinity of a particular MSI vector |
| * @dev: PCI device to operate on |
| * @nr: device-relative interrupt vector index (0-based). |
| * |
| * @nr has the following meanings depending on the interrupt mode: |
| * MSI-X: The index in the MSI-X vector table |
| * MSI: The index of the enabled MSI vectors |
| * INTx: Must be 0 |
| * |
| * Return: A cpumask pointer or NULL if @nr is out of range |
| */ |
| const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr) |
| { |
| int idx, irq = pci_irq_vector(dev, nr); |
| struct msi_desc *desc; |
| |
| if (WARN_ON_ONCE(irq <= 0)) |
| return NULL; |
| |
| desc = irq_get_msi_desc(irq); |
| /* Non-MSI does not have the information handy */ |
| if (!desc) |
| return cpu_possible_mask; |
| |
| /* MSI[X] interrupts can be allocated without affinity descriptor */ |
| if (!desc->affinity) |
| return NULL; |
| |
| /* |
| * MSI has a mask array in the descriptor. |
| * MSI-X has a single mask. |
| */ |
| idx = dev->msi_enabled ? nr : 0; |
| return &desc->affinity[idx].mask; |
| } |
| EXPORT_SYMBOL(pci_irq_get_affinity); |
| |
| struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc) |
| { |
| return to_pci_dev(desc->dev); |
| } |
| EXPORT_SYMBOL(msi_desc_to_pci_dev); |
| |
| void pci_no_msi(void) |
| { |
| pci_msi_enable = 0; |
| } |
| |
| /** |
| * pci_msi_enabled - is MSI enabled? |
| * |
| * Returns true if MSI has not been disabled by the command-line option |
| * pci=nomsi. |
| **/ |
| int pci_msi_enabled(void) |
| { |
| return pci_msi_enable; |
| } |
| EXPORT_SYMBOL(pci_msi_enabled); |