blob: 5c98850f5a360a38c48598f7d6b9093d2888da18 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# Phy drivers for Qualcomm and Atheros platforms
#
config PHY_ATH79_USB
tristate "Atheros AR71XX/9XXX USB PHY driver"
depends on OF && (ATH79 || COMPILE_TEST)
default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
select RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
config PHY_QCOM_APQ8064_SATA
tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
config PHY_QCOM_EDP
tristate "Qualcomm eDP PHY driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on OF
depends on COMMON_CLK
select GENERIC_PHY
help
Enable this driver to support the Qualcomm eDP PHY found in various
Qualcomm chipsets.
config PHY_QCOM_IPQ4019_USB
tristate "Qualcomm IPQ4019 USB PHY driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
config PHY_QCOM_PCIE2
tristate "Qualcomm PCIe Gen2 PHY Driver"
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
based PCIe controller.
config PHY_QCOM_QMP
tristate "Qualcomm QMP PHY Driver"
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable this to support the QMP PHY transceiver that is used
with controllers such as PCIe, UFS, and USB on Qualcomm chips.
config PHY_QCOM_QUSB2
tristate "Qualcomm QUSB2 PHY Driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on NVMEM || !NVMEM
select GENERIC_PHY
help
Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
controllers on Qualcomm chips. This driver supports the high-speed
PHY which is usually paired with either the ChipIdea or Synopsys DWC3
USB IPs on MSM SOCs.
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Support for the USB high-speed ULPI compliant phy on Qualcomm
chipsets.
config PHY_QCOM_USB_SNPS_FEMTO_V2
tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable support for the USB high-speed SNPS Femto phy on Qualcomm
chipsets. This PHY has differences in the register map compared
to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
controller on Qualcomm SOCs.
config PHY_QCOM_USB_HSIC
tristate "Qualcomm USB HSIC ULPI PHY module"
depends on USB_ULPI_BUS
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
config PHY_QCOM_USB_HS_28NM
tristate "Qualcomm 28nm High-Speed PHY"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
High-Speed PHY driver. This driver supports the Hi-Speed PHY which
is usually paired with either the ChipIdea or Synopsys DWC3 USB
IPs on MSM SOCs.
config PHY_QCOM_USB_SS
tristate "Qualcomm USB Super-Speed PHY driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Enable this to support the Super-Speed USB transceiver on various
Qualcomm chipsets.
config PHY_QCOM_IPQ806X_USB
tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
depends on HAS_IOMEM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
This option enables support for the Synopsis PHYs present inside the
Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
both HS and SS PHY controllers.