blob: 74b5ac7b26d65278e7453301be2b8491e1c6668c [file] [log] [blame]
* STMicroelectronics STM32 lcd-tft display controller
- ltdc: lcd-tft display controller host
Required properties:
- compatible: "st,stm32-ltdc"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: A list of phandle + clock-specifier pairs, one for each
entry in 'clock-names'.
- clock-names: A list of clock names. For ltdc it should contain:
- "lcd" for the clock feeding the output pixel clock & IP clock.
- resets: reset to be used by the device (defined by use of RCC macro).
Required nodes:
- Video port for RGB output.
* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
DesignWare MIPI DSI host controller
The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
DSI host controller. For all mandatory properties & nodes, please refer
to the related documentation in [5].
Mandatory properties specific to STM32 DSI:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "st,stm32-dsi".
- clock-names:
- phy pll reference clock string name, must be "ref".
- resets: see [5].
- reset-names: see [5].
Mandatory nodes specific to STM32 DSI:
- ports: A node containing DSI input & output port nodes with endpoint
definitions as documented in [3] & [4].
- port@0: DSI input port node, connected to the ltdc rgb output port.
- port@1: DSI output port node, connected to a panel or a bridge input port.
- panel or bridge node: A node containing the panel or bridge description as
documented in [6].
- port: panel or bridge port node, connected to the DSI output port (port@1).
Note: You can find more documentation in the following references
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/reset/reset.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/graph.txt
[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
Example 1: RGB panel
/ {
...
soc {
...
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
interrupts = <88>, <89>;
resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
clocks = <&rcc 1 CLK_LCD>;
clock-names = "lcd";
port {
ltdc_out_rgb: endpoint {
};
};
};
};
};
Example 2: DSI panel
/ {
...
soc {
...
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
interrupts = <88>, <89>;
resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
clocks = <&rcc 1 CLK_LCD>;
clock-names = "lcd";
port {
ltdc_out_dsi: endpoint {
remote-endpoint = <&dsi_in>;
};
};
};
dsi: dsi@40016c00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
clock-names = "ref", "pclk";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_in: endpoint {
remote-endpoint = <&ltdc_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&dsi_in_panel>;
};
};
};
panel-dsi@0 {
reg = <0>; /* dsi virtual channel (0..3) */
compatible = ...;
enable-gpios = ...;
port {
dsi_in_panel: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
};
};