|  | /* | 
|  | * Core driver for the generic pin config portions of the pin control subsystem | 
|  | * | 
|  | * Copyright (C) 2011 ST-Ericsson SA | 
|  | * Written on behalf of Linaro for ST-Ericsson | 
|  | * | 
|  | * Author: Linus Walleij <linus.walleij@linaro.org> | 
|  | * | 
|  | * License terms: GNU General Public License (GPL) version 2 | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) "generic pinconfig core: " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/pinctrl/pinctrl.h> | 
|  | #include <linux/pinctrl/pinconf.h> | 
|  | #include <linux/pinctrl/pinconf-generic.h> | 
|  | #include <linux/of.h> | 
|  | #include "core.h" | 
|  | #include "pinconf.h" | 
|  | #include "pinctrl-utils.h" | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | static const struct pin_config_item conf_items[] = { | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, | 
|  | "input bias pull to pin specific state", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA", true), | 
|  | PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec", true), | 
|  | PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true), | 
|  | PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), | 
|  | PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), | 
|  | PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), | 
|  | PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), | 
|  | PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true), | 
|  | }; | 
|  |  | 
|  | static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev, | 
|  | struct seq_file *s, const char *gname, | 
|  | unsigned pin, | 
|  | const struct pin_config_item *items, | 
|  | int nitems, int *print_sep) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nitems; i++) { | 
|  | unsigned long config; | 
|  | int ret; | 
|  |  | 
|  | /* We want to check out this parameter */ | 
|  | config = pinconf_to_config_packed(items[i].param, 0); | 
|  | if (gname) | 
|  | ret = pin_config_group_get(dev_name(pctldev->dev), | 
|  | gname, &config); | 
|  | else | 
|  | ret = pin_config_get_for_pin(pctldev, pin, &config); | 
|  | /* These are legal errors */ | 
|  | if (ret == -EINVAL || ret == -ENOTSUPP) | 
|  | continue; | 
|  | if (ret) { | 
|  | seq_printf(s, "ERROR READING CONFIG SETTING %d ", i); | 
|  | continue; | 
|  | } | 
|  | /* comma between multiple configs */ | 
|  | if (*print_sep) | 
|  | seq_puts(s, ", "); | 
|  | *print_sep = 1; | 
|  | seq_puts(s, items[i].display); | 
|  | /* Print unit if available */ | 
|  | if (items[i].has_arg) { | 
|  | seq_printf(s, " (%u", | 
|  | pinconf_to_config_argument(config)); | 
|  | if (items[i].format) | 
|  | seq_printf(s, " %s)", items[i].format); | 
|  | else | 
|  | seq_puts(s, ")"); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pinconf_generic_dump_pins - Print information about pin or group of pins | 
|  | * @pctldev:	Pincontrol device | 
|  | * @s:		File to print to | 
|  | * @gname:	Group name specifying pins | 
|  | * @pin:	Pin number specyfying pin | 
|  | * | 
|  | * Print the pinconf configuration for the requested pin(s) to @s. Pins can be | 
|  | * specified either by pin using @pin or by group using @gname. Only one needs | 
|  | * to be specified the other can be NULL/0. | 
|  | */ | 
|  | void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s, | 
|  | const char *gname, unsigned pin) | 
|  | { | 
|  | const struct pinconf_ops *ops = pctldev->desc->confops; | 
|  | int print_sep = 0; | 
|  |  | 
|  | if (!ops->is_generic) | 
|  | return; | 
|  |  | 
|  | /* generic parameters */ | 
|  | pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items, | 
|  | ARRAY_SIZE(conf_items), &print_sep); | 
|  | /* driver-specific parameters */ | 
|  | if (pctldev->desc->num_custom_params && | 
|  | pctldev->desc->custom_conf_items) | 
|  | pinconf_generic_dump_one(pctldev, s, gname, pin, | 
|  | pctldev->desc->custom_conf_items, | 
|  | pctldev->desc->num_custom_params, | 
|  | &print_sep); | 
|  | } | 
|  |  | 
|  | void pinconf_generic_dump_config(struct pinctrl_dev *pctldev, | 
|  | struct seq_file *s, unsigned long config) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(conf_items); i++) { | 
|  | if (pinconf_to_config_param(config) != conf_items[i].param) | 
|  | continue; | 
|  | seq_printf(s, "%s: 0x%x", conf_items[i].display, | 
|  | pinconf_to_config_argument(config)); | 
|  | } | 
|  |  | 
|  | if (!pctldev->desc->num_custom_params || | 
|  | !pctldev->desc->custom_conf_items) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < pctldev->desc->num_custom_params; i++) { | 
|  | if (pinconf_to_config_param(config) != | 
|  | pctldev->desc->custom_conf_items[i].param) | 
|  | continue; | 
|  | seq_printf(s, "%s: 0x%x", | 
|  | pctldev->desc->custom_conf_items[i].display, | 
|  | pinconf_to_config_argument(config)); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pinconf_generic_dump_config); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct pinconf_generic_params dt_params[] = { | 
|  | { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, | 
|  | { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, | 
|  | { "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 }, | 
|  | { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, | 
|  | { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, | 
|  | { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, | 
|  | { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 }, | 
|  | { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 }, | 
|  | { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 }, | 
|  | { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, | 
|  | { "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 }, | 
|  | { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 }, | 
|  | { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 }, | 
|  | { "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 }, | 
|  | { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, | 
|  | { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, | 
|  | { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, | 
|  | { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, | 
|  | { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, | 
|  | { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, | 
|  | { "output-high", PIN_CONFIG_OUTPUT, 1, }, | 
|  | { "output-low", PIN_CONFIG_OUTPUT, 0, }, | 
|  | { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, | 
|  | { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, | 
|  | { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, | 
|  | { "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * parse_dt_cfg() - Parse DT pinconf parameters | 
|  | * @np:	DT node | 
|  | * @params:	Array of describing generic parameters | 
|  | * @count:	Number of entries in @params | 
|  | * @cfg:	Array of parsed config options | 
|  | * @ncfg:	Number of entries in @cfg | 
|  | * | 
|  | * Parse the config options described in @params from @np and puts the result | 
|  | * in @cfg. @cfg does not need to be empty, entries are added beginning at | 
|  | * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg | 
|  | * needs to have enough memory allocated to hold all possible entries. | 
|  | */ | 
|  | static void parse_dt_cfg(struct device_node *np, | 
|  | const struct pinconf_generic_params *params, | 
|  | unsigned int count, unsigned long *cfg, | 
|  | unsigned int *ncfg) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | u32 val; | 
|  | int ret; | 
|  | const struct pinconf_generic_params *par = ¶ms[i]; | 
|  |  | 
|  | ret = of_property_read_u32(np, par->property, &val); | 
|  |  | 
|  | /* property not found */ | 
|  | if (ret == -EINVAL) | 
|  | continue; | 
|  |  | 
|  | /* use default value, when no value is specified */ | 
|  | if (ret) | 
|  | val = par->default_value; | 
|  |  | 
|  | pr_debug("found %s with value %u\n", par->property, val); | 
|  | cfg[*ncfg] = pinconf_to_config_packed(par->param, val); | 
|  | (*ncfg)++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pinconf_generic_parse_dt_config() | 
|  | * parse the config properties into generic pinconfig values. | 
|  | * @np: node containing the pinconfig properties | 
|  | * @configs: array with nconfigs entries containing the generic pinconf values | 
|  | *           must be freed when no longer necessary. | 
|  | * @nconfigs: umber of configurations | 
|  | */ | 
|  | int pinconf_generic_parse_dt_config(struct device_node *np, | 
|  | struct pinctrl_dev *pctldev, | 
|  | unsigned long **configs, | 
|  | unsigned int *nconfigs) | 
|  | { | 
|  | unsigned long *cfg; | 
|  | unsigned int max_cfg, ncfg = 0; | 
|  | int ret; | 
|  |  | 
|  | if (!np) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* allocate a temporary array big enough to hold one of each option */ | 
|  | max_cfg = ARRAY_SIZE(dt_params); | 
|  | if (pctldev) | 
|  | max_cfg += pctldev->desc->num_custom_params; | 
|  | cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL); | 
|  | if (!cfg) | 
|  | return -ENOMEM; | 
|  |  | 
|  | parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg); | 
|  | if (pctldev && pctldev->desc->num_custom_params && | 
|  | pctldev->desc->custom_params) | 
|  | parse_dt_cfg(np, pctldev->desc->custom_params, | 
|  | pctldev->desc->num_custom_params, cfg, &ncfg); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | /* no configs found at all */ | 
|  | if (ncfg == 0) { | 
|  | *configs = NULL; | 
|  | *nconfigs = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now limit the number of configs to the real number of | 
|  | * found properties. | 
|  | */ | 
|  | *configs = kmemdup(cfg, ncfg * sizeof(unsigned long), GFP_KERNEL); | 
|  | if (!*configs) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | *nconfigs = ncfg; | 
|  |  | 
|  | out: | 
|  | kfree(cfg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev, | 
|  | struct device_node *np, struct pinctrl_map **map, | 
|  | unsigned *reserved_maps, unsigned *num_maps, | 
|  | enum pinctrl_map_type type) | 
|  | { | 
|  | int ret; | 
|  | const char *function; | 
|  | struct device *dev = pctldev->dev; | 
|  | unsigned long *configs = NULL; | 
|  | unsigned num_configs = 0; | 
|  | unsigned reserve, strings_count; | 
|  | struct property *prop; | 
|  | const char *group; | 
|  | const char *subnode_target_type = "pins"; | 
|  |  | 
|  | ret = of_property_count_strings(np, "pins"); | 
|  | if (ret < 0) { | 
|  | ret = of_property_count_strings(np, "groups"); | 
|  | if (ret < 0) | 
|  | /* skip this node; may contain config child nodes */ | 
|  | return 0; | 
|  | if (type == PIN_MAP_TYPE_INVALID) | 
|  | type = PIN_MAP_TYPE_CONFIGS_GROUP; | 
|  | subnode_target_type = "groups"; | 
|  | } else { | 
|  | if (type == PIN_MAP_TYPE_INVALID) | 
|  | type = PIN_MAP_TYPE_CONFIGS_PIN; | 
|  | } | 
|  | strings_count = ret; | 
|  |  | 
|  | ret = of_property_read_string(np, "function", &function); | 
|  | if (ret < 0) { | 
|  | /* EINVAL=missing, which is fine since it's optional */ | 
|  | if (ret != -EINVAL) | 
|  | dev_err(dev, "%pOF: could not parse property function\n", | 
|  | np); | 
|  | function = NULL; | 
|  | } | 
|  |  | 
|  | ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, | 
|  | &num_configs); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%pOF: could not parse node property\n", np); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | reserve = 0; | 
|  | if (function != NULL) | 
|  | reserve++; | 
|  | if (num_configs) | 
|  | reserve++; | 
|  |  | 
|  | reserve *= strings_count; | 
|  |  | 
|  | ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, | 
|  | num_maps, reserve); | 
|  | if (ret < 0) | 
|  | goto exit; | 
|  |  | 
|  | of_property_for_each_string(np, subnode_target_type, prop, group) { | 
|  | if (function) { | 
|  | ret = pinctrl_utils_add_map_mux(pctldev, map, | 
|  | reserved_maps, num_maps, group, | 
|  | function); | 
|  | if (ret < 0) | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (num_configs) { | 
|  | ret = pinctrl_utils_add_map_configs(pctldev, map, | 
|  | reserved_maps, num_maps, group, configs, | 
|  | num_configs, type); | 
|  | if (ret < 0) | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  | ret = 0; | 
|  |  | 
|  | exit: | 
|  | kfree(configs); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pinconf_generic_dt_subnode_to_map); | 
|  |  | 
|  | int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev, | 
|  | struct device_node *np_config, struct pinctrl_map **map, | 
|  | unsigned *num_maps, enum pinctrl_map_type type) | 
|  | { | 
|  | unsigned reserved_maps; | 
|  | struct device_node *np; | 
|  | int ret; | 
|  |  | 
|  | reserved_maps = 0; | 
|  | *map = NULL; | 
|  | *num_maps = 0; | 
|  |  | 
|  | ret = pinconf_generic_dt_subnode_to_map(pctldev, np_config, map, | 
|  | &reserved_maps, num_maps, type); | 
|  | if (ret < 0) | 
|  | goto exit; | 
|  |  | 
|  | for_each_available_child_of_node(np_config, np) { | 
|  | ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map, | 
|  | &reserved_maps, num_maps, type); | 
|  | if (ret < 0) | 
|  | goto exit; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | pinctrl_utils_free_map(pctldev, *map, *num_maps); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map); | 
|  |  | 
|  | void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev, | 
|  | struct pinctrl_map *map, | 
|  | unsigned num_maps) | 
|  | { | 
|  | pinctrl_utils_free_map(pctldev, map, num_maps); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pinconf_generic_dt_free_map); | 
|  |  | 
|  | #endif |