drivers/scsi/qla2xxx/qla_sup.c - linux/kernel/git/klassert/ipsec-next - Git at Google

 /*
  * QLogic Fibre Channel HBA Driver
  * Copyright (c)  2003-2005 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 #include "qla_def.h"

 #include <linux/delay.h>
 #include <asm/uaccess.h>

 static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
 static void qla2x00_nv_deselect(scsi_qla_host_t *);
 static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);

 /*
  * NVRAM support routines
  */

 /**
  * qla2x00_lock_nvram_access() -
  * @ha: HA context
  */
 void
 qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
 {
 	uint16_t data;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
 		data = RD_REG_WORD(&reg->nvram);
 		while (data & NVR_BUSY) {
 			udelay(100);
 			data = RD_REG_WORD(&reg->nvram);
 		}

 		/* Lock resource */
 		WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
 		RD_REG_WORD(&reg->u.isp2300.host_semaphore);
 		udelay(5);
 		data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
 		while ((data & BIT_0) == 0) {
 			/* Lock failed */
 			udelay(100);
 			WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
 			RD_REG_WORD(&reg->u.isp2300.host_semaphore);
 			udelay(5);
 			data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
 		}
 	}
 }

 /**
  * qla2x00_unlock_nvram_access() -
  * @ha: HA context
  */
 void
 qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
 {
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
 		WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
 		RD_REG_WORD(&reg->u.isp2300.host_semaphore);
 	}
 }

 /**
  * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
  *	request routine to get the word from NVRAM.
  * @ha: HA context
  * @addr: Address in NVRAM to read
  *
  * Returns the word read from nvram @addr.
  */
 uint16_t
 qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
 {
 	uint16_t	data;
 	uint32_t	nv_cmd;

 	nv_cmd = addr << 16;
 	nv_cmd |= NV_READ_OP;
 	data = qla2x00_nvram_request(ha, nv_cmd);

 	return (data);
 }

 /**
  * qla2x00_write_nvram_word() - Write NVRAM data.
  * @ha: HA context
  * @addr: Address in NVRAM to write
  * @data: word to program
  */
 void
 qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
 {
 	int count;
 	uint16_t word;
 	uint32_t nv_cmd;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	qla2x00_nv_write(ha, NVR_DATA_OUT);
 	qla2x00_nv_write(ha, 0);
 	qla2x00_nv_write(ha, 0);

 	for (word = 0; word < 8; word++)
 		qla2x00_nv_write(ha, NVR_DATA_OUT);

 	qla2x00_nv_deselect(ha);

 	/* Write data */
 	nv_cmd = (addr << 16) | NV_WRITE_OP;
 	nv_cmd |= data;
 	nv_cmd <<= 5;
 	for (count = 0; count < 27; count++) {
 		if (nv_cmd & BIT_31)
 			qla2x00_nv_write(ha, NVR_DATA_OUT);
 		else
 			qla2x00_nv_write(ha, 0);

 		nv_cmd <<= 1;
 	}

 	qla2x00_nv_deselect(ha);

 	/* Wait for NVRAM to become ready */
 	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	do {
 		NVRAM_DELAY();
 		word = RD_REG_WORD(&reg->nvram);
 	} while ((word & NVR_DATA_IN) == 0);

 	qla2x00_nv_deselect(ha);

 	/* Disable writes */
 	qla2x00_nv_write(ha, NVR_DATA_OUT);
 	for (count = 0; count < 10; count++)
 		qla2x00_nv_write(ha, 0);

 	qla2x00_nv_deselect(ha);
 }

 static int
 qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
     uint32_t tmo)
 {
 	int ret, count;
 	uint16_t word;
 	uint32_t nv_cmd;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	ret = QLA_SUCCESS;

 	qla2x00_nv_write(ha, NVR_DATA_OUT);
 	qla2x00_nv_write(ha, 0);
 	qla2x00_nv_write(ha, 0);

 	for (word = 0; word < 8; word++)
 		qla2x00_nv_write(ha, NVR_DATA_OUT);

 	qla2x00_nv_deselect(ha);

 	/* Write data */
 	nv_cmd = (addr << 16) | NV_WRITE_OP;
 	nv_cmd |= data;
 	nv_cmd <<= 5;
 	for (count = 0; count < 27; count++) {
 		if (nv_cmd & BIT_31)
 			qla2x00_nv_write(ha, NVR_DATA_OUT);
 		else
 			qla2x00_nv_write(ha, 0);

 		nv_cmd <<= 1;
 	}

 	qla2x00_nv_deselect(ha);

 	/* Wait for NVRAM to become ready */
 	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	do {
 		NVRAM_DELAY();
 		word = RD_REG_WORD(&reg->nvram);
 		if (!--tmo) {
 			ret = QLA_FUNCTION_FAILED;
 			break;
 		}
 	} while ((word & NVR_DATA_IN) == 0);

 	qla2x00_nv_deselect(ha);

 	/* Disable writes */
 	qla2x00_nv_write(ha, NVR_DATA_OUT);
 	for (count = 0; count < 10; count++)
 		qla2x00_nv_write(ha, 0);

 	qla2x00_nv_deselect(ha);

 	return ret;
 }

 /**
  * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
  *	NVRAM.
  * @ha: HA context
  * @nv_cmd: NVRAM command
  *
  * Bit definitions for NVRAM command:
  *
  *	Bit 26     = start bit
  *	Bit 25, 24 = opcode
  *	Bit 23-16  = address
  *	Bit 15-0   = write data
  *
  * Returns the word read from nvram @addr.
  */
 static uint16_t
 qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
 {
 	uint8_t		cnt;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	uint16_t	data = 0;
 	uint16_t	reg_data;

 	/* Send command to NVRAM. */
 	nv_cmd <<= 5;
 	for (cnt = 0; cnt < 11; cnt++) {
 		if (nv_cmd & BIT_31)
 			qla2x00_nv_write(ha, NVR_DATA_OUT);
 		else
 			qla2x00_nv_write(ha, 0);
 		nv_cmd <<= 1;
 	}

 	/* Read data from NVRAM. */
 	for (cnt = 0; cnt < 16; cnt++) {
 		WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
 		RD_REG_WORD(&reg->nvram);	/* PCI Posting. */
 		NVRAM_DELAY();
 		data <<= 1;
 		reg_data = RD_REG_WORD(&reg->nvram);
 		if (reg_data & NVR_DATA_IN)
 			data |= BIT_0;
 		WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 		RD_REG_WORD(&reg->nvram);	/* PCI Posting. */
 		NVRAM_DELAY();
 	}

 	/* Deselect chip. */
 	WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	NVRAM_DELAY();

 	return (data);
 }

 /**
  * qla2x00_nv_write() - Clean NVRAM operations.
  * @ha: HA context
  */
 static void
 qla2x00_nv_deselect(scsi_qla_host_t *ha)
 {
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	NVRAM_DELAY();
 }

 /**
  * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
  * @ha: HA context
  * @data: Serial interface selector
  */
 static void
 qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
 {
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

 	WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	NVRAM_DELAY();
 	WRT_REG_WORD(&reg->nvram, data | NVR_SELECT| NVR_CLOCK |
 	    NVR_WRT_ENABLE);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	NVRAM_DELAY();
 	WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	NVRAM_DELAY();
 }

 /**
  * qla2x00_clear_nvram_protection() -
  * @ha: HA context
  */
 static int
 qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
 {
 	int ret, stat;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	uint32_t word;
 	uint16_t wprot, wprot_old;

 	/* Clear NVRAM write protection. */
 	ret = QLA_FUNCTION_FAILED;
 	wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
 	stat = qla2x00_write_nvram_word_tmo(ha, 0,
 	    __constant_cpu_to_le16(0x1234), 100000);
 	wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
 	if (stat != QLA_SUCCESS || wprot != __constant_cpu_to_le16(0x1234)) {
 		/* Write enable. */
 		qla2x00_nv_write(ha, NVR_DATA_OUT);
 		qla2x00_nv_write(ha, 0);
 		qla2x00_nv_write(ha, 0);
 		for (word = 0; word < 8; word++)
 			qla2x00_nv_write(ha, NVR_DATA_OUT);

 		qla2x00_nv_deselect(ha);

 		/* Enable protection register. */
 		qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 		qla2x00_nv_write(ha, NVR_PR_ENABLE);
 		qla2x00_nv_write(ha, NVR_PR_ENABLE);
 		for (word = 0; word < 8; word++)
 			qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);

 		qla2x00_nv_deselect(ha);

 		/* Clear protection register (ffff is cleared). */
 		qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 		qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 		qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 		for (word = 0; word < 8; word++)
 			qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);

 		qla2x00_nv_deselect(ha);

 		/* Wait for NVRAM to become ready. */
 		WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 		RD_REG_WORD(&reg->nvram);	/* PCI Posting. */
 		do {
 			NVRAM_DELAY();
 			word = RD_REG_WORD(&reg->nvram);
 		} while ((word & NVR_DATA_IN) == 0);

 		ret = QLA_SUCCESS;
 	} else
 		qla2x00_write_nvram_word(ha, 0, wprot_old);

 	return ret;
 }

 static void
 qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
 {
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	uint32_t word;

 	if (stat != QLA_SUCCESS)
 		return;

 	/* Set NVRAM write protection. */
 	/* Write enable. */
 	qla2x00_nv_write(ha, NVR_DATA_OUT);
 	qla2x00_nv_write(ha, 0);
 	qla2x00_nv_write(ha, 0);
 	for (word = 0; word < 8; word++)
 		qla2x00_nv_write(ha, NVR_DATA_OUT);

 	qla2x00_nv_deselect(ha);

 	/* Enable protection register. */
 	qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 	qla2x00_nv_write(ha, NVR_PR_ENABLE);
 	qla2x00_nv_write(ha, NVR_PR_ENABLE);
 	for (word = 0; word < 8; word++)
 		qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);

 	qla2x00_nv_deselect(ha);

 	/* Enable protection register. */
 	qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 	qla2x00_nv_write(ha, NVR_PR_ENABLE);
 	qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 	for (word = 0; word < 8; word++)
 		qla2x00_nv_write(ha, NVR_PR_ENABLE);

 	qla2x00_nv_deselect(ha);

 	/* Wait for NVRAM to become ready. */
 	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
 	do {
 		NVRAM_DELAY();
 		word = RD_REG_WORD(&reg->nvram);
 	} while ((word & NVR_DATA_IN) == 0);
 }


 /*****************************************************************************/
 /* Flash Manipulation Routines                                               */
 /*****************************************************************************/

 static inline uint32_t
 flash_conf_to_access_addr(uint32_t faddr)
 {
 	return FARX_ACCESS_FLASH_CONF | faddr;
 }

 static inline uint32_t
 flash_data_to_access_addr(uint32_t faddr)
 {
 	return FARX_ACCESS_FLASH_DATA | faddr;
 }

 static inline uint32_t
 nvram_conf_to_access_addr(uint32_t naddr)
 {
 	return FARX_ACCESS_NVRAM_CONF | naddr;
 }

 static inline uint32_t
 nvram_data_to_access_addr(uint32_t naddr)
 {
 	return FARX_ACCESS_NVRAM_DATA | naddr;
 }

 uint32_t
 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 {
 	int rval;
 	uint32_t cnt, data;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

 	WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
 	/* Wait for READ cycle to complete. */
 	rval = QLA_SUCCESS;
 	for (cnt = 3000;
 	    (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
 	    rval == QLA_SUCCESS; cnt--) {
 		if (cnt)
 			udelay(10);
 		else
 			rval = QLA_FUNCTION_TIMEOUT;
 	}

 	/* TODO: What happens if we time out? */
 	data = 0xDEADDEAD;
 	if (rval == QLA_SUCCESS)
 		data = RD_REG_DWORD(&reg->flash_data);

 	return data;
 }

 uint32_t *
 qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {
 	uint32_t i;

 	/* Dword reads to flash. */
 	for (i = 0; i < dwords; i++, faddr++)
 		dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 		    flash_data_to_access_addr(faddr)));

 	return dwptr;
 }

 int
 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 {
 	int rval;
 	uint32_t cnt;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

 	WRT_REG_DWORD(&reg->flash_data, data);
 	RD_REG_DWORD(&reg->flash_data);		/* PCI Posting. */
 	WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
 	/* Wait for Write cycle to complete. */
 	rval = QLA_SUCCESS;
 	for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
 	    rval == QLA_SUCCESS; cnt--) {
 		if (cnt)
 			udelay(10);
 		else
 			rval = QLA_FUNCTION_TIMEOUT;
 	}
 	return rval;
 }

 void
 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
     uint8_t *flash_id)
 {
 	uint32_t ids;

 	ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
 	*man_id = LSB(ids);
 	*flash_id = MSB(ids);
 }

 int
 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {
 	int ret;
 	uint32_t liter;
 	uint32_t sec_mask, rest_addr, conf_addr;
 	uint32_t fdata;
 	uint8_t	man_id, flash_id;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

 	ret = QLA_SUCCESS;

 	qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
 	DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
 	    ha->host_no, man_id, flash_id));

 	conf_addr = flash_conf_to_access_addr(0x03d8);
 	switch (man_id) {
 	case 0xbf: /* STT flash. */
 		rest_addr = 0x1fff;
 		sec_mask = 0x3e000;
 		if (flash_id == 0x80)
 			conf_addr = flash_conf_to_access_addr(0x0352);
 		break;
 	case 0x13: /* ST M25P80. */
 		rest_addr = 0x3fff;
 		sec_mask = 0x3c000;
 		break;
 	default:
 		/* Default to 64 kb sector size. */
 		rest_addr = 0x3fff;
 		sec_mask = 0x3c000;
 		break;
 	}

 	/* Enable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */

 	/* Disable flash write-protection. */
 	qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);

 	do {    /* Loop once to provide quick error exit. */
 		for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
 			/* Are we at the beginning of a sector? */
 			if ((faddr & rest_addr) == 0) {
 				fdata = (faddr & sec_mask) << 2;
 				ret = qla24xx_write_flash_dword(ha, conf_addr,
 				    (fdata & 0xff00) |((fdata << 16) &
 				    0xff0000) | ((fdata >> 16) & 0xff));
 				if (ret != QLA_SUCCESS) {
 					DEBUG9(printk("%s(%ld) Unable to flash "
 					    "sector: address=%x.\n", __func__,
 					    ha->host_no, faddr));
 					break;
 				}
 			}
 			ret = qla24xx_write_flash_dword(ha,
 			    flash_data_to_access_addr(faddr),
 			    cpu_to_le32(*dwptr));
 			if (ret != QLA_SUCCESS) {
 				DEBUG9(printk("%s(%ld) Unable to program flash "
 				    "address=%x data=%x.\n", __func__,
 				    ha->host_no, faddr, *dwptr));
 				break;
 			}
 		}
 	} while (0);

 	/* Disable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */

 	return ret;
 }

 uint8_t *
 qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
     uint32_t bytes)
 {
 	uint32_t i;
 	uint16_t *wptr;

 	/* Word reads to NVRAM via registers. */
 	wptr = (uint16_t *)buf;
 	qla2x00_lock_nvram_access(ha);
 	for (i = 0; i < bytes >> 1; i++, naddr++)
 		wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
 		    naddr));
 	qla2x00_unlock_nvram_access(ha);

 	return buf;
 }

 uint8_t *
 qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
     uint32_t bytes)
 {
 	uint32_t i;
 	uint32_t *dwptr;

 	/* Dword reads to flash. */
 	dwptr = (uint32_t *)buf;
 	for (i = 0; i < bytes >> 2; i++, naddr++)
 		dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 		    nvram_data_to_access_addr(naddr)));

 	return buf;
 }

 int
 qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
     uint32_t bytes)
 {
 	int ret, stat;
 	uint32_t i;
 	uint16_t *wptr;

 	ret = QLA_SUCCESS;

 	qla2x00_lock_nvram_access(ha);

 	/* Disable NVRAM write-protection. */
 	stat = qla2x00_clear_nvram_protection(ha);

 	wptr = (uint16_t *)buf;
 	for (i = 0; i < bytes >> 1; i++, naddr++) {
 		qla2x00_write_nvram_word(ha, naddr,
 		    cpu_to_le16(*wptr));
 		wptr++;
 	}

 	/* Enable NVRAM write-protection. */
 	qla2x00_set_nvram_protection(ha, stat);

 	qla2x00_unlock_nvram_access(ha);

 	return ret;
 }

 int
 qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
     uint32_t bytes)
 {
 	int ret;
 	uint32_t i;
 	uint32_t *dwptr;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

 	ret = QLA_SUCCESS;

 	/* Enable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */

 	/* Disable NVRAM write-protection. */
 	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 	    0);
 	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 	    0);

 	/* Dword writes to flash. */
 	dwptr = (uint32_t *)buf;
 	for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
 		ret = qla24xx_write_flash_dword(ha,
 		    nvram_data_to_access_addr(naddr),
 		    cpu_to_le32(*dwptr));
 		if (ret != QLA_SUCCESS) {
 			DEBUG9(printk("%s(%ld) Unable to program "
 			    "nvram address=%x data=%x.\n", __func__,
 			    ha->host_no, naddr, *dwptr));
 			break;
 		}
 	}

 	/* Enable NVRAM write-protection. */
 	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 	    0x8c);

 	/* Disable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */

 	return ret;
 }
	/*
	* QLogic Fibre Channel HBA Driver
	* Copyright (c) 2003-2005 QLogic Corporation
	*
	* See LICENSE.qla2xxx for copyright and licensing details.
	*/
	#include "qla_def.h"

	#include <linux/delay.h>
	#include <asm/uaccess.h>

	static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
	static void qla2x00_nv_deselect(scsi_qla_host_t *);
	static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);

	/*
	* NVRAM support routines
	*/

	/**
	* qla2x00_lock_nvram_access() -
	* @ha: HA context
	*/
	void
	qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
	{
	uint16_t data;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
	data = RD_REG_WORD(&reg->nvram);
	while (data & NVR_BUSY) {
	udelay(100);
	data = RD_REG_WORD(&reg->nvram);
	}

	/* Lock resource */
	WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
	RD_REG_WORD(&reg->u.isp2300.host_semaphore);
	udelay(5);
	data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
	while ((data & BIT_0) == 0) {
	/* Lock failed */
	udelay(100);
	WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
	RD_REG_WORD(&reg->u.isp2300.host_semaphore);
	udelay(5);
	data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
	}
	}
	}

	/**
	* qla2x00_unlock_nvram_access() -
	* @ha: HA context
	*/
	void
	qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
	{
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
	WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
	RD_REG_WORD(&reg->u.isp2300.host_semaphore);
	}
	}

	/**
	* qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
	* request routine to get the word from NVRAM.
	* @ha: HA context
	* @addr: Address in NVRAM to read
	*
	* Returns the word read from nvram @addr.
	*/
	uint16_t
	qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
	{
	uint16_t data;
	uint32_t nv_cmd;

	nv_cmd = addr << 16;
	nv_cmd \|= NV_READ_OP;
	data = qla2x00_nvram_request(ha, nv_cmd);

	return (data);
	}

	/**
	* qla2x00_write_nvram_word() - Write NVRAM data.
	* @ha: HA context
	* @addr: Address in NVRAM to write
	* @data: word to program
	*/
	void
	qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
	{
	int count;
	uint16_t word;
	uint32_t nv_cmd;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	qla2x00_nv_write(ha, NVR_DATA_OUT);
	qla2x00_nv_write(ha, 0);
	qla2x00_nv_write(ha, 0);

	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT);

	qla2x00_nv_deselect(ha);

	/* Write data */
	nv_cmd = (addr << 16) \| NV_WRITE_OP;
	nv_cmd \|= data;
	nv_cmd <<= 5;
	for (count = 0; count < 27; count++) {
	if (nv_cmd & BIT_31)
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	else
	qla2x00_nv_write(ha, 0);

	nv_cmd <<= 1;
	}

	qla2x00_nv_deselect(ha);

	/* Wait for NVRAM to become ready */
	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	do {
	NVRAM_DELAY();
	word = RD_REG_WORD(&reg->nvram);
	} while ((word & NVR_DATA_IN) == 0);

	qla2x00_nv_deselect(ha);

	/* Disable writes */
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	for (count = 0; count < 10; count++)
	qla2x00_nv_write(ha, 0);

	qla2x00_nv_deselect(ha);
	}

	static int
	qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
	uint32_t tmo)
	{
	int ret, count;
	uint16_t word;
	uint32_t nv_cmd;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	ret = QLA_SUCCESS;

	qla2x00_nv_write(ha, NVR_DATA_OUT);
	qla2x00_nv_write(ha, 0);
	qla2x00_nv_write(ha, 0);

	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT);

	qla2x00_nv_deselect(ha);

	/* Write data */
	nv_cmd = (addr << 16) \| NV_WRITE_OP;
	nv_cmd \|= data;
	nv_cmd <<= 5;
	for (count = 0; count < 27; count++) {
	if (nv_cmd & BIT_31)
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	else
	qla2x00_nv_write(ha, 0);

	nv_cmd <<= 1;
	}

	qla2x00_nv_deselect(ha);

	/* Wait for NVRAM to become ready */
	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	do {
	NVRAM_DELAY();
	word = RD_REG_WORD(&reg->nvram);
	if (!--tmo) {
	ret = QLA_FUNCTION_FAILED;
	break;
	}
	} while ((word & NVR_DATA_IN) == 0);

	qla2x00_nv_deselect(ha);

	/* Disable writes */
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	for (count = 0; count < 10; count++)
	qla2x00_nv_write(ha, 0);

	qla2x00_nv_deselect(ha);

	return ret;
	}

	/**
	* qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
	* NVRAM.
	* @ha: HA context
	* @nv_cmd: NVRAM command
	*
	* Bit definitions for NVRAM command:
	*
	* Bit 26 = start bit
	* Bit 25, 24 = opcode
	* Bit 23-16 = address
	* Bit 15-0 = write data
	*
	* Returns the word read from nvram @addr.
	*/
	static uint16_t
	qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
	{
	uint8_t cnt;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	uint16_t data = 0;
	uint16_t reg_data;

	/* Send command to NVRAM. */
	nv_cmd <<= 5;
	for (cnt = 0; cnt < 11; cnt++) {
	if (nv_cmd & BIT_31)
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	else
	qla2x00_nv_write(ha, 0);
	nv_cmd <<= 1;
	}

	/* Read data from NVRAM. */
	for (cnt = 0; cnt < 16; cnt++) {
	WRT_REG_WORD(&reg->nvram, NVR_SELECT \| NVR_CLOCK);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	data <<= 1;
	reg_data = RD_REG_WORD(&reg->nvram);
	if (reg_data & NVR_DATA_IN)
	data \|= BIT_0;
	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	}

	/* Deselect chip. */
	WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();

	return (data);
	}

	/**
	* qla2x00_nv_write() - Clean NVRAM operations.
	* @ha: HA context
	*/
	static void
	qla2x00_nv_deselect(scsi_qla_host_t *ha)
	{
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	}

	/**
	* qla2x00_nv_write() - Prepare for NVRAM read/write operation.
	* @ha: HA context
	* @data: Serial interface selector
	*/
	static void
	qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
	{
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;

	WRT_REG_WORD(&reg->nvram, data \| NVR_SELECT \| NVR_WRT_ENABLE);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	WRT_REG_WORD(&reg->nvram, data \| NVR_SELECT\| NVR_CLOCK \|
	NVR_WRT_ENABLE);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	WRT_REG_WORD(&reg->nvram, data \| NVR_SELECT \| NVR_WRT_ENABLE);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	NVRAM_DELAY();
	}

	/**
	* qla2x00_clear_nvram_protection() -
	* @ha: HA context
	*/
	static int
	qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
	{
	int ret, stat;
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	uint32_t word;
	uint16_t wprot, wprot_old;

	/* Clear NVRAM write protection. */
	ret = QLA_FUNCTION_FAILED;
	wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
	stat = qla2x00_write_nvram_word_tmo(ha, 0,
	__constant_cpu_to_le16(0x1234), 100000);
	wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
	if (stat != QLA_SUCCESS \|\| wprot != __constant_cpu_to_le16(0x1234)) {
	/* Write enable. */
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	qla2x00_nv_write(ha, 0);
	qla2x00_nv_write(ha, 0);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT);

	qla2x00_nv_deselect(ha);

	/* Enable protection register. */
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	qla2x00_nv_write(ha, NVR_PR_ENABLE);
	qla2x00_nv_write(ha, NVR_PR_ENABLE);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT \| NVR_PR_ENABLE);

	qla2x00_nv_deselect(ha);

	/* Clear protection register (ffff is cleared). */
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT \| NVR_PR_ENABLE);

	qla2x00_nv_deselect(ha);

	/* Wait for NVRAM to become ready. */
	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	do {
	NVRAM_DELAY();
	word = RD_REG_WORD(&reg->nvram);
	} while ((word & NVR_DATA_IN) == 0);

	ret = QLA_SUCCESS;
	} else
	qla2x00_write_nvram_word(ha, 0, wprot_old);

	return ret;
	}

	static void
	qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
	{
	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
	uint32_t word;

	if (stat != QLA_SUCCESS)
	return;

	/* Set NVRAM write protection. */
	/* Write enable. */
	qla2x00_nv_write(ha, NVR_DATA_OUT);
	qla2x00_nv_write(ha, 0);
	qla2x00_nv_write(ha, 0);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT);

	qla2x00_nv_deselect(ha);

	/* Enable protection register. */
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	qla2x00_nv_write(ha, NVR_PR_ENABLE);
	qla2x00_nv_write(ha, NVR_PR_ENABLE);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_DATA_OUT \| NVR_PR_ENABLE);

	qla2x00_nv_deselect(ha);

	/* Enable protection register. */
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	qla2x00_nv_write(ha, NVR_PR_ENABLE);
	qla2x00_nv_write(ha, NVR_PR_ENABLE \| NVR_DATA_OUT);
	for (word = 0; word < 8; word++)
	qla2x00_nv_write(ha, NVR_PR_ENABLE);

	qla2x00_nv_deselect(ha);

	/* Wait for NVRAM to become ready. */
	WRT_REG_WORD(&reg->nvram, NVR_SELECT);
	RD_REG_WORD(&reg->nvram); /* PCI Posting. */
	do {
	NVRAM_DELAY();
	word = RD_REG_WORD(&reg->nvram);
	} while ((word & NVR_DATA_IN) == 0);
	}


	/*****************************************************************************/
	/* Flash Manipulation Routines */
	/*****************************************************************************/

	static inline uint32_t
	flash_conf_to_access_addr(uint32_t faddr)
	{
	return FARX_ACCESS_FLASH_CONF \| faddr;
	}

	static inline uint32_t
	flash_data_to_access_addr(uint32_t faddr)
	{
	return FARX_ACCESS_FLASH_DATA \| faddr;
	}

	static inline uint32_t
	nvram_conf_to_access_addr(uint32_t naddr)
	{
	return FARX_ACCESS_NVRAM_CONF \| naddr;
	}

	static inline uint32_t
	nvram_data_to_access_addr(uint32_t naddr)
	{
	return FARX_ACCESS_NVRAM_DATA \| naddr;
	}

	uint32_t
	qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
	{
	int rval;
	uint32_t cnt, data;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
	/* Wait for READ cycle to complete. */
	rval = QLA_SUCCESS;
	for (cnt = 3000;
	(RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
	rval == QLA_SUCCESS; cnt--) {
	if (cnt)
	udelay(10);
	else
	rval = QLA_FUNCTION_TIMEOUT;
	}

	/* TODO: What happens if we time out? */
	data = 0xDEADDEAD;
	if (rval == QLA_SUCCESS)
	data = RD_REG_DWORD(&reg->flash_data);

	return data;
	}

	uint32_t *
	qla24xx_read_flash_data(scsi_qla_host_t ha, uint32_t dwptr, uint32_t faddr,
	uint32_t dwords)
	{
	uint32_t i;

	/* Dword reads to flash. */
	for (i = 0; i < dwords; i++, faddr++)
	dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
	flash_data_to_access_addr(faddr)));

	return dwptr;
	}

	int
	qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
	{
	int rval;
	uint32_t cnt;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	WRT_REG_DWORD(&reg->flash_data, data);
	RD_REG_DWORD(&reg->flash_data); /* PCI Posting. */
	WRT_REG_DWORD(&reg->flash_addr, addr \| FARX_DATA_FLAG);
	/* Wait for Write cycle to complete. */
	rval = QLA_SUCCESS;
	for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
	rval == QLA_SUCCESS; cnt--) {
	if (cnt)
	udelay(10);
	else
	rval = QLA_FUNCTION_TIMEOUT;
	}
	return rval;
	}

	void
	qla24xx_get_flash_manufacturer(scsi_qla_host_t ha, uint8_t man_id,
	uint8_t *flash_id)
	{
	uint32_t ids;

	ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
	*man_id = LSB(ids);
	*flash_id = MSB(ids);
	}

	int
	qla24xx_write_flash_data(scsi_qla_host_t ha, uint32_t dwptr, uint32_t faddr,
	uint32_t dwords)
	{
	int ret;
	uint32_t liter;
	uint32_t sec_mask, rest_addr, conf_addr;
	uint32_t fdata;
	uint8_t man_id, flash_id;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	ret = QLA_SUCCESS;

	qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
	DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
	ha->host_no, man_id, flash_id));

	conf_addr = flash_conf_to_access_addr(0x03d8);
	switch (man_id) {
	case 0xbf: /* STT flash. */
	rest_addr = 0x1fff;
	sec_mask = 0x3e000;
	if (flash_id == 0x80)
	conf_addr = flash_conf_to_access_addr(0x0352);
	break;
	case 0x13: /* ST M25P80. */
	rest_addr = 0x3fff;
	sec_mask = 0x3c000;
	break;
	default:
	/* Default to 64 kb sector size. */
	rest_addr = 0x3fff;
	sec_mask = 0x3c000;
	break;
	}

	/* Enable flash write. */
	WRT_REG_DWORD(&reg->ctrl_status,
	RD_REG_DWORD(&reg->ctrl_status) \| CSRX_FLASH_ENABLE);
	RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */

	/* Disable flash write-protection. */
	qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);

	do { /* Loop once to provide quick error exit. */
	for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
	/* Are we at the beginning of a sector? */
	if ((faddr & rest_addr) == 0) {
	fdata = (faddr & sec_mask) << 2;
	ret = qla24xx_write_flash_dword(ha, conf_addr,
	(fdata & 0xff00) \|((fdata << 16) &
	0xff0000) \| ((fdata >> 16) & 0xff));
	if (ret != QLA_SUCCESS) {
	DEBUG9(printk("%s(%ld) Unable to flash "
	"sector: address=%x.\n", __func__,
	ha->host_no, faddr));
	break;
	}
	}
	ret = qla24xx_write_flash_dword(ha,
	flash_data_to_access_addr(faddr),
	cpu_to_le32(*dwptr));
	if (ret != QLA_SUCCESS) {
	DEBUG9(printk("%s(%ld) Unable to program flash "
	"address=%x data=%x.\n", __func__,
	ha->host_no, faddr, *dwptr));
	break;
	}
	}
	} while (0);

	/* Disable flash write. */
	WRT_REG_DWORD(&reg->ctrl_status,
	RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
	RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */

	return ret;
	}

	uint8_t *
	qla2x00_read_nvram_data(scsi_qla_host_t ha, uint8_t buf, uint32_t naddr,
	uint32_t bytes)
	{
	uint32_t i;
	uint16_t *wptr;

	/* Word reads to NVRAM via registers. */
	wptr = (uint16_t *)buf;
	qla2x00_lock_nvram_access(ha);
	for (i = 0; i < bytes >> 1; i++, naddr++)
	wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
	naddr));
	qla2x00_unlock_nvram_access(ha);

	return buf;
	}

	uint8_t *
	qla24xx_read_nvram_data(scsi_qla_host_t ha, uint8_t buf, uint32_t naddr,
	uint32_t bytes)
	{
	uint32_t i;
	uint32_t *dwptr;

	/* Dword reads to flash. */
	dwptr = (uint32_t *)buf;
	for (i = 0; i < bytes >> 2; i++, naddr++)
	dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
	nvram_data_to_access_addr(naddr)));

	return buf;
	}

	int
	qla2x00_write_nvram_data(scsi_qla_host_t ha, uint8_t buf, uint32_t naddr,
	uint32_t bytes)
	{
	int ret, stat;
	uint32_t i;
	uint16_t *wptr;

	ret = QLA_SUCCESS;

	qla2x00_lock_nvram_access(ha);

	/* Disable NVRAM write-protection. */
	stat = qla2x00_clear_nvram_protection(ha);

	wptr = (uint16_t *)buf;
	for (i = 0; i < bytes >> 1; i++, naddr++) {
	qla2x00_write_nvram_word(ha, naddr,
	cpu_to_le16(*wptr));
	wptr++;
	}

	/* Enable NVRAM write-protection. */
	qla2x00_set_nvram_protection(ha, stat);

	qla2x00_unlock_nvram_access(ha);

	return ret;
	}

	int
	qla24xx_write_nvram_data(scsi_qla_host_t ha, uint8_t buf, uint32_t naddr,
	uint32_t bytes)
	{
	int ret;
	uint32_t i;
	uint32_t *dwptr;
	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;

	ret = QLA_SUCCESS;

	/* Enable flash write. */
	WRT_REG_DWORD(&reg->ctrl_status,
	RD_REG_DWORD(&reg->ctrl_status) \| CSRX_FLASH_ENABLE);
	RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */

	/* Disable NVRAM write-protection. */
	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
	0);
	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
	0);

	/* Dword writes to flash. */
	dwptr = (uint32_t *)buf;
	for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
	ret = qla24xx_write_flash_dword(ha,
	nvram_data_to_access_addr(naddr),
	cpu_to_le32(*dwptr));
	if (ret != QLA_SUCCESS) {
	DEBUG9(printk("%s(%ld) Unable to program "
	"nvram address=%x data=%x.\n", __func__,
	ha->host_no, naddr, *dwptr));
	break;
	}
	}

	/* Enable NVRAM write-protection. */
	qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
	0x8c);

	/* Disable flash write. */
	WRT_REG_DWORD(&reg->ctrl_status,
	RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
	RD_REG_DWORD(&reg->ctrl_status); /* PCI Posting. */

	return ret;
	}