|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sysfs.h> | 
|  |  | 
|  | #include "siox.h" | 
|  |  | 
|  | /* | 
|  | * The lowest bit in the SIOX status word signals if the in-device watchdog is | 
|  | * ok. If the bit is set, the device is functional. | 
|  | * | 
|  | * On writing the watchdog timer is reset when this bit toggles. | 
|  | */ | 
|  | #define SIOX_STATUS_WDG			0x01 | 
|  |  | 
|  | /* | 
|  | * Bits 1 to 3 of the status word read as the bitwise negation of what was | 
|  | * clocked in before. The value clocked in is changed in each cycle and so | 
|  | * allows to detect transmit/receive problems. | 
|  | */ | 
|  | #define SIOX_STATUS_COUNTER		0x0e | 
|  |  | 
|  | /* | 
|  | * Each Siox-Device has a 4 bit type number that is neither 0 nor 15. This is | 
|  | * available in the upper nibble of the read status. | 
|  | * | 
|  | * On write these bits are DC. | 
|  | */ | 
|  | #define SIOX_STATUS_TYPE		0xf0 | 
|  |  | 
|  | #define CREATE_TRACE_POINTS | 
|  | #include <trace/events/siox.h> | 
|  |  | 
|  | static bool siox_is_registered; | 
|  |  | 
|  | static void siox_master_lock(struct siox_master *smaster) | 
|  | { | 
|  | mutex_lock(&smaster->lock); | 
|  | } | 
|  |  | 
|  | static void siox_master_unlock(struct siox_master *smaster) | 
|  | { | 
|  | mutex_unlock(&smaster->lock); | 
|  | } | 
|  |  | 
|  | static inline u8 siox_status_clean(u8 status_read, u8 status_written) | 
|  | { | 
|  | /* | 
|  | * bits 3:1 of status sample the respective bit in the status | 
|  | * byte written in the previous cycle but inverted. So if you wrote the | 
|  | * status word as 0xa before (counter = 0b101), it is expected to get | 
|  | * back the counter bits as 0b010. | 
|  | * | 
|  | * So given the last status written this function toggles the there | 
|  | * unset counter bits in the read value such that the counter bits in | 
|  | * the return value are all zero iff the bits were read as expected to | 
|  | * simplify error detection. | 
|  | */ | 
|  |  | 
|  | return status_read ^ (~status_written & 0xe); | 
|  | } | 
|  |  | 
|  | static bool siox_device_counter_error(struct siox_device *sdevice, | 
|  | u8 status_clean) | 
|  | { | 
|  | return (status_clean & SIOX_STATUS_COUNTER) != 0; | 
|  | } | 
|  |  | 
|  | static bool siox_device_type_error(struct siox_device *sdevice, u8 status_clean) | 
|  | { | 
|  | u8 statustype = (status_clean & SIOX_STATUS_TYPE) >> 4; | 
|  |  | 
|  | /* | 
|  | * If the device knows which value the type bits should have, check | 
|  | * against this value otherwise just rule out the invalid values 0b0000 | 
|  | * and 0b1111. | 
|  | */ | 
|  | if (sdevice->statustype) { | 
|  | if (statustype != sdevice->statustype) | 
|  | return true; | 
|  | } else { | 
|  | switch (statustype) { | 
|  | case 0: | 
|  | case 0xf: | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool siox_device_wdg_error(struct siox_device *sdevice, u8 status_clean) | 
|  | { | 
|  | return (status_clean & SIOX_STATUS_WDG) == 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If there is a type or counter error the device is called "unsynced". | 
|  | */ | 
|  | bool siox_device_synced(struct siox_device *sdevice) | 
|  | { | 
|  | if (siox_device_type_error(sdevice, sdevice->status_read_clean)) | 
|  | return false; | 
|  |  | 
|  | return !siox_device_counter_error(sdevice, sdevice->status_read_clean); | 
|  |  | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(siox_device_synced); | 
|  |  | 
|  | /* | 
|  | * A device is called "connected" if it is synced and the watchdog is not | 
|  | * asserted. | 
|  | */ | 
|  | bool siox_device_connected(struct siox_device *sdevice) | 
|  | { | 
|  | if (!siox_device_synced(sdevice)) | 
|  | return false; | 
|  |  | 
|  | return !siox_device_wdg_error(sdevice, sdevice->status_read_clean); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(siox_device_connected); | 
|  |  | 
|  | static void siox_poll(struct siox_master *smaster) | 
|  | { | 
|  | struct siox_device *sdevice; | 
|  | size_t i = smaster->setbuf_len; | 
|  | unsigned int devno = 0; | 
|  | int unsync_error = 0; | 
|  |  | 
|  | smaster->last_poll = jiffies; | 
|  |  | 
|  | /* | 
|  | * The counter bits change in each second cycle, the watchdog bit | 
|  | * toggles each time. | 
|  | * The counter bits hold values from [0, 6]. 7 would be possible | 
|  | * theoretically but the protocol designer considered that a bad idea | 
|  | * for reasons unknown today. (Maybe that's because then the status read | 
|  | * back has only zeros in the counter bits then which might be confused | 
|  | * with a stuck-at-0 error. But for the same reason (with s/0/1/) 0 | 
|  | * could be skipped.) | 
|  | */ | 
|  | if (++smaster->status > 0x0d) | 
|  | smaster->status = 0; | 
|  |  | 
|  | memset(smaster->buf, 0, smaster->setbuf_len); | 
|  |  | 
|  | /* prepare data pushed out to devices in buf[0..setbuf_len) */ | 
|  | list_for_each_entry(sdevice, &smaster->devices, node) { | 
|  | struct siox_driver *sdriver = | 
|  | to_siox_driver(sdevice->dev.driver); | 
|  | sdevice->status_written = smaster->status; | 
|  |  | 
|  | i -= sdevice->inbytes; | 
|  |  | 
|  | /* | 
|  | * If the device or a previous one is unsynced, don't pet the | 
|  | * watchdog. This is done to ensure that the device is kept in | 
|  | * reset when something is wrong. | 
|  | */ | 
|  | if (!siox_device_synced(sdevice)) | 
|  | unsync_error = 1; | 
|  |  | 
|  | if (sdriver && !unsync_error) | 
|  | sdriver->set_data(sdevice, sdevice->status_written, | 
|  | &smaster->buf[i + 1]); | 
|  | else | 
|  | /* | 
|  | * Don't trigger watchdog if there is no driver or a | 
|  | * sync problem | 
|  | */ | 
|  | sdevice->status_written &= ~SIOX_STATUS_WDG; | 
|  |  | 
|  | smaster->buf[i] = sdevice->status_written; | 
|  |  | 
|  | trace_siox_set_data(smaster, sdevice, devno, i); | 
|  |  | 
|  | devno++; | 
|  | } | 
|  |  | 
|  | smaster->pushpull(smaster, smaster->setbuf_len, smaster->buf, | 
|  | smaster->getbuf_len, | 
|  | smaster->buf + smaster->setbuf_len); | 
|  |  | 
|  | unsync_error = 0; | 
|  |  | 
|  | /* interpret data pulled in from devices in buf[setbuf_len..] */ | 
|  | devno = 0; | 
|  | i = smaster->setbuf_len; | 
|  | list_for_each_entry(sdevice, &smaster->devices, node) { | 
|  | struct siox_driver *sdriver = | 
|  | to_siox_driver(sdevice->dev.driver); | 
|  | u8 status = smaster->buf[i + sdevice->outbytes - 1]; | 
|  | u8 status_clean; | 
|  | u8 prev_status_clean = sdevice->status_read_clean; | 
|  | bool synced = true; | 
|  | bool connected = true; | 
|  |  | 
|  | if (!siox_device_synced(sdevice)) | 
|  | unsync_error = 1; | 
|  |  | 
|  | /* | 
|  | * If the watchdog bit wasn't toggled in this cycle, report the | 
|  | * watchdog as active to give a consistent view for drivers and | 
|  | * sysfs consumers. | 
|  | */ | 
|  | if (!sdriver || unsync_error) | 
|  | status &= ~SIOX_STATUS_WDG; | 
|  |  | 
|  | status_clean = | 
|  | siox_status_clean(status, | 
|  | sdevice->status_written_lastcycle); | 
|  |  | 
|  | /* Check counter and type bits */ | 
|  | if (siox_device_counter_error(sdevice, status_clean) || | 
|  | siox_device_type_error(sdevice, status_clean)) { | 
|  | bool prev_error; | 
|  |  | 
|  | synced = false; | 
|  |  | 
|  | /* only report a new error if the last cycle was ok */ | 
|  | prev_error = | 
|  | siox_device_counter_error(sdevice, | 
|  | prev_status_clean) || | 
|  | siox_device_type_error(sdevice, | 
|  | prev_status_clean); | 
|  |  | 
|  | if (!prev_error) { | 
|  | sdevice->status_errors++; | 
|  | sysfs_notify_dirent(sdevice->status_errors_kn); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If the device is unsynced report the watchdog as active */ | 
|  | if (!synced) { | 
|  | status &= ~SIOX_STATUS_WDG; | 
|  | status_clean &= ~SIOX_STATUS_WDG; | 
|  | } | 
|  |  | 
|  | if (siox_device_wdg_error(sdevice, status_clean)) | 
|  | connected = false; | 
|  |  | 
|  | /* The watchdog state changed just now */ | 
|  | if ((status_clean ^ prev_status_clean) & SIOX_STATUS_WDG) { | 
|  | sysfs_notify_dirent(sdevice->watchdog_kn); | 
|  |  | 
|  | if (siox_device_wdg_error(sdevice, status_clean)) { | 
|  | struct kernfs_node *wd_errs = | 
|  | sdevice->watchdog_errors_kn; | 
|  |  | 
|  | sdevice->watchdog_errors++; | 
|  | sysfs_notify_dirent(wd_errs); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (connected != sdevice->connected) | 
|  | sysfs_notify_dirent(sdevice->connected_kn); | 
|  |  | 
|  | sdevice->status_read_clean = status_clean; | 
|  | sdevice->status_written_lastcycle = sdevice->status_written; | 
|  | sdevice->connected = connected; | 
|  |  | 
|  | trace_siox_get_data(smaster, sdevice, devno, status_clean, i); | 
|  |  | 
|  | /* only give data read to driver if the device is connected */ | 
|  | if (sdriver && connected) | 
|  | sdriver->get_data(sdevice, &smaster->buf[i]); | 
|  |  | 
|  | devno++; | 
|  | i += sdevice->outbytes; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int siox_poll_thread(void *data) | 
|  | { | 
|  | struct siox_master *smaster = data; | 
|  | signed long timeout = 0; | 
|  |  | 
|  | get_device(&smaster->dev); | 
|  |  | 
|  | for (;;) { | 
|  | if (kthread_should_stop()) { | 
|  | put_device(&smaster->dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  |  | 
|  | if (smaster->active) { | 
|  | unsigned long next_poll = | 
|  | smaster->last_poll + smaster->poll_interval; | 
|  | if (time_is_before_eq_jiffies(next_poll)) | 
|  | siox_poll(smaster); | 
|  |  | 
|  | timeout = smaster->poll_interval - | 
|  | (jiffies - smaster->last_poll); | 
|  | } else { | 
|  | timeout = MAX_SCHEDULE_TIMEOUT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set the task to idle while holding the lock. This makes sure | 
|  | * that we don't sleep too long when the bus is reenabled before | 
|  | * schedule_timeout is reached. | 
|  | */ | 
|  | if (timeout > 0) | 
|  | set_current_state(TASK_IDLE); | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | if (timeout > 0) | 
|  | schedule_timeout(timeout); | 
|  |  | 
|  | /* | 
|  | * I'm not clear if/why it is important to set the state to | 
|  | * RUNNING again, but it fixes a "do not call blocking ops when | 
|  | * !TASK_RUNNING;"-warning. | 
|  | */ | 
|  | set_current_state(TASK_RUNNING); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __siox_start(struct siox_master *smaster) | 
|  | { | 
|  | if (!(smaster->setbuf_len + smaster->getbuf_len)) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!smaster->buf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (smaster->active) | 
|  | return 0; | 
|  |  | 
|  | smaster->active = 1; | 
|  | wake_up_process(smaster->poll_thread); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int siox_start(struct siox_master *smaster) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  | ret = __siox_start(smaster); | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __siox_stop(struct siox_master *smaster) | 
|  | { | 
|  | if (smaster->active) { | 
|  | struct siox_device *sdevice; | 
|  |  | 
|  | smaster->active = 0; | 
|  |  | 
|  | list_for_each_entry(sdevice, &smaster->devices, node) { | 
|  | if (sdevice->connected) | 
|  | sysfs_notify_dirent(sdevice->connected_kn); | 
|  | sdevice->connected = false; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int siox_stop(struct siox_master *smaster) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  | ret = __siox_stop(smaster); | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t type_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%s\n", sdev->type); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(type); | 
|  |  | 
|  | static ssize_t inbytes_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%zu\n", sdev->inbytes); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(inbytes); | 
|  |  | 
|  | static ssize_t outbytes_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%zu\n", sdev->outbytes); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(outbytes); | 
|  |  | 
|  | static ssize_t status_errors_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  | unsigned int status_errors; | 
|  |  | 
|  | siox_master_lock(sdev->smaster); | 
|  |  | 
|  | status_errors = sdev->status_errors; | 
|  |  | 
|  | siox_master_unlock(sdev->smaster); | 
|  |  | 
|  | return sprintf(buf, "%u\n", status_errors); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(status_errors); | 
|  |  | 
|  | static ssize_t connected_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  | bool connected; | 
|  |  | 
|  | siox_master_lock(sdev->smaster); | 
|  |  | 
|  | connected = sdev->connected; | 
|  |  | 
|  | siox_master_unlock(sdev->smaster); | 
|  |  | 
|  | return sprintf(buf, "%u\n", connected); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(connected); | 
|  |  | 
|  | static ssize_t watchdog_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  | u8 status; | 
|  |  | 
|  | siox_master_lock(sdev->smaster); | 
|  |  | 
|  | status = sdev->status_read_clean; | 
|  |  | 
|  | siox_master_unlock(sdev->smaster); | 
|  |  | 
|  | return sprintf(buf, "%d\n", status & SIOX_STATUS_WDG); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(watchdog); | 
|  |  | 
|  | static ssize_t watchdog_errors_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_device *sdev = to_siox_device(dev); | 
|  | unsigned int watchdog_errors; | 
|  |  | 
|  | siox_master_lock(sdev->smaster); | 
|  |  | 
|  | watchdog_errors = sdev->watchdog_errors; | 
|  |  | 
|  | siox_master_unlock(sdev->smaster); | 
|  |  | 
|  | return sprintf(buf, "%u\n", watchdog_errors); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(watchdog_errors); | 
|  |  | 
|  | static struct attribute *siox_device_attrs[] = { | 
|  | &dev_attr_type.attr, | 
|  | &dev_attr_inbytes.attr, | 
|  | &dev_attr_outbytes.attr, | 
|  | &dev_attr_status_errors.attr, | 
|  | &dev_attr_connected.attr, | 
|  | &dev_attr_watchdog.attr, | 
|  | &dev_attr_watchdog_errors.attr, | 
|  | NULL | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(siox_device); | 
|  |  | 
|  | static void siox_device_release(struct device *dev) | 
|  | { | 
|  | struct siox_device *sdevice = to_siox_device(dev); | 
|  |  | 
|  | kfree(sdevice); | 
|  | } | 
|  |  | 
|  | static struct device_type siox_device_type = { | 
|  | .groups = siox_device_groups, | 
|  | .release = siox_device_release, | 
|  | }; | 
|  |  | 
|  | static int siox_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | if (dev->type != &siox_device_type) | 
|  | return 0; | 
|  |  | 
|  | /* up to now there is only a single driver so keeping this simple */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static struct bus_type siox_bus_type = { | 
|  | .name = "siox", | 
|  | .match = siox_match, | 
|  | }; | 
|  |  | 
|  | static int siox_driver_probe(struct device *dev) | 
|  | { | 
|  | struct siox_driver *sdriver = to_siox_driver(dev->driver); | 
|  | struct siox_device *sdevice = to_siox_device(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = sdriver->probe(sdevice); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int siox_driver_remove(struct device *dev) | 
|  | { | 
|  | struct siox_driver *sdriver = | 
|  | container_of(dev->driver, struct siox_driver, driver); | 
|  | struct siox_device *sdevice = to_siox_device(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = sdriver->remove(sdevice); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void siox_driver_shutdown(struct device *dev) | 
|  | { | 
|  | struct siox_driver *sdriver = | 
|  | container_of(dev->driver, struct siox_driver, driver); | 
|  | struct siox_device *sdevice = to_siox_device(dev); | 
|  |  | 
|  | sdriver->shutdown(sdevice); | 
|  | } | 
|  |  | 
|  | static ssize_t active_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", smaster->active); | 
|  | } | 
|  |  | 
|  | static ssize_t active_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  | int ret; | 
|  | int active; | 
|  |  | 
|  | ret = kstrtoint(buf, 0, &active); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (active) | 
|  | ret = siox_start(smaster); | 
|  | else | 
|  | ret = siox_stop(smaster); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(active); | 
|  |  | 
|  | static struct siox_device *siox_device_add(struct siox_master *smaster, | 
|  | const char *type, size_t inbytes, | 
|  | size_t outbytes, u8 statustype); | 
|  |  | 
|  | static ssize_t device_add_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  | int ret; | 
|  | char type[20] = ""; | 
|  | size_t inbytes = 0, outbytes = 0; | 
|  | u8 statustype = 0; | 
|  |  | 
|  | ret = sscanf(buf, "%19s %zu %zu %hhu", type, &inbytes, | 
|  | &outbytes, &statustype); | 
|  | if (ret != 3 && ret != 4) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (strcmp(type, "siox-12x8") || inbytes != 2 || outbytes != 4) | 
|  | return -EINVAL; | 
|  |  | 
|  | siox_device_add(smaster, "siox-12x8", inbytes, outbytes, statustype); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_WO(device_add); | 
|  |  | 
|  | static void siox_device_remove(struct siox_master *smaster); | 
|  |  | 
|  | static ssize_t device_remove_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  |  | 
|  | /* XXX? require to write <type> <inbytes> <outbytes> */ | 
|  | siox_device_remove(smaster); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_WO(device_remove); | 
|  |  | 
|  | static ssize_t poll_interval_ns_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  |  | 
|  | return sprintf(buf, "%lld\n", jiffies_to_nsecs(smaster->poll_interval)); | 
|  | } | 
|  |  | 
|  | static ssize_t poll_interval_ns_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  | int ret; | 
|  | u64 val; | 
|  |  | 
|  | ret = kstrtou64(buf, 0, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  |  | 
|  | smaster->poll_interval = nsecs_to_jiffies(val); | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(poll_interval_ns); | 
|  |  | 
|  | static struct attribute *siox_master_attrs[] = { | 
|  | &dev_attr_active.attr, | 
|  | &dev_attr_device_add.attr, | 
|  | &dev_attr_device_remove.attr, | 
|  | &dev_attr_poll_interval_ns.attr, | 
|  | NULL | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(siox_master); | 
|  |  | 
|  | static void siox_master_release(struct device *dev) | 
|  | { | 
|  | struct siox_master *smaster = to_siox_master(dev); | 
|  |  | 
|  | kfree(smaster); | 
|  | } | 
|  |  | 
|  | static struct device_type siox_master_type = { | 
|  | .groups = siox_master_groups, | 
|  | .release = siox_master_release, | 
|  | }; | 
|  |  | 
|  | struct siox_master *siox_master_alloc(struct device *dev, | 
|  | size_t size) | 
|  | { | 
|  | struct siox_master *smaster; | 
|  |  | 
|  | if (!dev) | 
|  | return NULL; | 
|  |  | 
|  | smaster = kzalloc(sizeof(*smaster) + size, GFP_KERNEL); | 
|  | if (!smaster) | 
|  | return NULL; | 
|  |  | 
|  | device_initialize(&smaster->dev); | 
|  |  | 
|  | smaster->busno = -1; | 
|  | smaster->dev.bus = &siox_bus_type; | 
|  | smaster->dev.type = &siox_master_type; | 
|  | smaster->dev.parent = dev; | 
|  | smaster->poll_interval = DIV_ROUND_UP(HZ, 40); | 
|  |  | 
|  | dev_set_drvdata(&smaster->dev, &smaster[1]); | 
|  |  | 
|  | return smaster; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(siox_master_alloc); | 
|  |  | 
|  | int siox_master_register(struct siox_master *smaster) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!siox_is_registered) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | if (!smaster->pushpull) | 
|  | return -EINVAL; | 
|  |  | 
|  | dev_set_name(&smaster->dev, "siox-%d", smaster->busno); | 
|  |  | 
|  | mutex_init(&smaster->lock); | 
|  | INIT_LIST_HEAD(&smaster->devices); | 
|  |  | 
|  | smaster->last_poll = jiffies; | 
|  | smaster->poll_thread = kthread_run(siox_poll_thread, smaster, | 
|  | "siox-%d", smaster->busno); | 
|  | if (IS_ERR(smaster->poll_thread)) { | 
|  | smaster->active = 0; | 
|  | return PTR_ERR(smaster->poll_thread); | 
|  | } | 
|  |  | 
|  | ret = device_add(&smaster->dev); | 
|  | if (ret) | 
|  | kthread_stop(smaster->poll_thread); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(siox_master_register); | 
|  |  | 
|  | void siox_master_unregister(struct siox_master *smaster) | 
|  | { | 
|  | /* remove device */ | 
|  | device_del(&smaster->dev); | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  |  | 
|  | __siox_stop(smaster); | 
|  |  | 
|  | while (smaster->num_devices) { | 
|  | struct siox_device *sdevice; | 
|  |  | 
|  | sdevice = container_of(smaster->devices.prev, | 
|  | struct siox_device, node); | 
|  | list_del(&sdevice->node); | 
|  | smaster->num_devices--; | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | device_unregister(&sdevice->dev); | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  | } | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | put_device(&smaster->dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(siox_master_unregister); | 
|  |  | 
|  | static struct siox_device *siox_device_add(struct siox_master *smaster, | 
|  | const char *type, size_t inbytes, | 
|  | size_t outbytes, u8 statustype) | 
|  | { | 
|  | struct siox_device *sdevice; | 
|  | int ret; | 
|  | size_t buf_len; | 
|  |  | 
|  | sdevice = kzalloc(sizeof(*sdevice), GFP_KERNEL); | 
|  | if (!sdevice) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | sdevice->type = type; | 
|  | sdevice->inbytes = inbytes; | 
|  | sdevice->outbytes = outbytes; | 
|  | sdevice->statustype = statustype; | 
|  |  | 
|  | sdevice->smaster = smaster; | 
|  | sdevice->dev.parent = &smaster->dev; | 
|  | sdevice->dev.bus = &siox_bus_type; | 
|  | sdevice->dev.type = &siox_device_type; | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  |  | 
|  | dev_set_name(&sdevice->dev, "siox-%d-%d", | 
|  | smaster->busno, smaster->num_devices); | 
|  |  | 
|  | buf_len = smaster->setbuf_len + inbytes + | 
|  | smaster->getbuf_len + outbytes; | 
|  | if (smaster->buf_len < buf_len) { | 
|  | u8 *buf = krealloc(smaster->buf, buf_len, GFP_KERNEL); | 
|  |  | 
|  | if (!buf) { | 
|  | dev_err(&smaster->dev, | 
|  | "failed to realloc buffer to %zu\n", buf_len); | 
|  | ret = -ENOMEM; | 
|  | goto err_buf_alloc; | 
|  | } | 
|  |  | 
|  | smaster->buf_len = buf_len; | 
|  | smaster->buf = buf; | 
|  | } | 
|  |  | 
|  | ret = device_register(&sdevice->dev); | 
|  | if (ret) { | 
|  | dev_err(&smaster->dev, "failed to register device: %d\n", ret); | 
|  |  | 
|  | goto err_device_register; | 
|  | } | 
|  |  | 
|  | smaster->num_devices++; | 
|  | list_add_tail(&sdevice->node, &smaster->devices); | 
|  |  | 
|  | smaster->setbuf_len += sdevice->inbytes; | 
|  | smaster->getbuf_len += sdevice->outbytes; | 
|  |  | 
|  | sdevice->status_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | 
|  | "status_errors"); | 
|  | sdevice->watchdog_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | 
|  | "watchdog"); | 
|  | sdevice->watchdog_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | 
|  | "watchdog_errors"); | 
|  | sdevice->connected_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, | 
|  | "connected"); | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | return sdevice; | 
|  |  | 
|  | err_device_register: | 
|  | /* don't care to make the buffer smaller again */ | 
|  |  | 
|  | err_buf_alloc: | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | kfree(sdevice); | 
|  |  | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | static void siox_device_remove(struct siox_master *smaster) | 
|  | { | 
|  | struct siox_device *sdevice; | 
|  |  | 
|  | siox_master_lock(smaster); | 
|  |  | 
|  | if (!smaster->num_devices) { | 
|  | siox_master_unlock(smaster); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sdevice = container_of(smaster->devices.prev, struct siox_device, node); | 
|  | list_del(&sdevice->node); | 
|  | smaster->num_devices--; | 
|  |  | 
|  | smaster->setbuf_len -= sdevice->inbytes; | 
|  | smaster->getbuf_len -= sdevice->outbytes; | 
|  |  | 
|  | if (!smaster->num_devices) | 
|  | __siox_stop(smaster); | 
|  |  | 
|  | siox_master_unlock(smaster); | 
|  |  | 
|  | /* | 
|  | * This must be done without holding the master lock because we're | 
|  | * called from device_remove_store which also holds a sysfs mutex. | 
|  | * device_unregister tries to aquire the same lock. | 
|  | */ | 
|  | device_unregister(&sdevice->dev); | 
|  | } | 
|  |  | 
|  | int __siox_driver_register(struct siox_driver *sdriver, struct module *owner) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (unlikely(!siox_is_registered)) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | if (!sdriver->set_data && !sdriver->get_data) { | 
|  | pr_err("Driver %s doesn't provide needed callbacks\n", | 
|  | sdriver->driver.name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | sdriver->driver.owner = owner; | 
|  | sdriver->driver.bus = &siox_bus_type; | 
|  |  | 
|  | if (sdriver->probe) | 
|  | sdriver->driver.probe = siox_driver_probe; | 
|  | if (sdriver->remove) | 
|  | sdriver->driver.remove = siox_driver_remove; | 
|  | if (sdriver->shutdown) | 
|  | sdriver->driver.shutdown = siox_driver_shutdown; | 
|  |  | 
|  | ret = driver_register(&sdriver->driver); | 
|  | if (ret) | 
|  | pr_err("Failed to register siox driver %s (%d)\n", | 
|  | sdriver->driver.name, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__siox_driver_register); | 
|  |  | 
|  | static int __init siox_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = bus_register(&siox_bus_type); | 
|  | if (ret) { | 
|  | pr_err("Registration of SIOX bus type failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | siox_is_registered = true; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | subsys_initcall(siox_init); | 
|  |  | 
|  | static void __exit siox_exit(void) | 
|  | { | 
|  | bus_unregister(&siox_bus_type); | 
|  | } | 
|  | module_exit(siox_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); | 
|  | MODULE_DESCRIPTION("Eckelmann SIOX driver core"); | 
|  | MODULE_LICENSE("GPL v2"); |