| /* | 
 |  * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. | 
 |  * | 
 |  * This software is available to you under a choice of one of two | 
 |  * licenses.  You may choose to be licensed under the terms of the GNU | 
 |  * General Public License (GPL) Version 2, available from the file | 
 |  * COPYING in the main directory of this source tree, or the | 
 |  * OpenIB.org BSD license below: | 
 |  * | 
 |  *     Redistribution and use in source and binary forms, with or | 
 |  *     without modification, are permitted provided that the following | 
 |  *     conditions are met: | 
 |  * | 
 |  *      - Redistributions of source code must retain the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer. | 
 |  * | 
 |  *      - Redistributions in binary form must reproduce the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer in the documentation and/or other materials | 
 |  *        provided with the distribution. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
 |  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
 |  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
 |  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | 
 |  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | 
 |  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | 
 |  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | 
 |  * SOFTWARE. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/init.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/if_vlan.h> | 
 | #include <linux/mdio.h> | 
 | #include <linux/sockios.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/rtnetlink.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/log2.h> | 
 | #include <linux/stringify.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/slab.h> | 
 | #include <asm/uaccess.h> | 
 |  | 
 | #include "common.h" | 
 | #include "cxgb3_ioctl.h" | 
 | #include "regs.h" | 
 | #include "cxgb3_offload.h" | 
 | #include "version.h" | 
 |  | 
 | #include "cxgb3_ctl_defs.h" | 
 | #include "t3_cpl.h" | 
 | #include "firmware_exports.h" | 
 |  | 
 | enum { | 
 | 	MAX_TXQ_ENTRIES = 16384, | 
 | 	MAX_CTRL_TXQ_ENTRIES = 1024, | 
 | 	MAX_RSPQ_ENTRIES = 16384, | 
 | 	MAX_RX_BUFFERS = 16384, | 
 | 	MAX_RX_JUMBO_BUFFERS = 16384, | 
 | 	MIN_TXQ_ENTRIES = 4, | 
 | 	MIN_CTRL_TXQ_ENTRIES = 4, | 
 | 	MIN_RSPQ_ENTRIES = 32, | 
 | 	MIN_FL_ENTRIES = 32 | 
 | }; | 
 |  | 
 | #define PORT_MASK ((1 << MAX_NPORTS) - 1) | 
 |  | 
 | #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ | 
 | 			 NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ | 
 | 			 NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) | 
 |  | 
 | #define EEPROM_MAGIC 0x38E2F10C | 
 |  | 
 | #define CH_DEVICE(devid, idx) \ | 
 | 	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx } | 
 |  | 
 | static DEFINE_PCI_DEVICE_TABLE(cxgb3_pci_tbl) = { | 
 | 	CH_DEVICE(0x20, 0),	/* PE9000 */ | 
 | 	CH_DEVICE(0x21, 1),	/* T302E */ | 
 | 	CH_DEVICE(0x22, 2),	/* T310E */ | 
 | 	CH_DEVICE(0x23, 3),	/* T320X */ | 
 | 	CH_DEVICE(0x24, 1),	/* T302X */ | 
 | 	CH_DEVICE(0x25, 3),	/* T320E */ | 
 | 	CH_DEVICE(0x26, 2),	/* T310X */ | 
 | 	CH_DEVICE(0x30, 2),	/* T3B10 */ | 
 | 	CH_DEVICE(0x31, 3),	/* T3B20 */ | 
 | 	CH_DEVICE(0x32, 1),	/* T3B02 */ | 
 | 	CH_DEVICE(0x35, 6),	/* T3C20-derived T3C10 */ | 
 | 	CH_DEVICE(0x36, 3),	/* S320E-CR */ | 
 | 	CH_DEVICE(0x37, 7),	/* N320E-G2 */ | 
 | 	{0,} | 
 | }; | 
 |  | 
 | MODULE_DESCRIPTION(DRV_DESC); | 
 | MODULE_AUTHOR("Chelsio Communications"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); | 
 | MODULE_VERSION(DRV_VERSION); | 
 | MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl); | 
 |  | 
 | static int dflt_msg_enable = DFLT_MSG_ENABLE; | 
 |  | 
 | module_param(dflt_msg_enable, int, 0644); | 
 | MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap"); | 
 |  | 
 | /* | 
 |  * The driver uses the best interrupt scheme available on a platform in the | 
 |  * order MSI-X, MSI, legacy pin interrupts.  This parameter determines which | 
 |  * of these schemes the driver may consider as follows: | 
 |  * | 
 |  * msi = 2: choose from among all three options | 
 |  * msi = 1: only consider MSI and pin interrupts | 
 |  * msi = 0: force pin interrupts | 
 |  */ | 
 | static int msi = 2; | 
 |  | 
 | module_param(msi, int, 0644); | 
 | MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X"); | 
 |  | 
 | /* | 
 |  * The driver enables offload as a default. | 
 |  * To disable it, use ofld_disable = 1. | 
 |  */ | 
 |  | 
 | static int ofld_disable = 0; | 
 |  | 
 | module_param(ofld_disable, int, 0644); | 
 | MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not"); | 
 |  | 
 | /* | 
 |  * We have work elements that we need to cancel when an interface is taken | 
 |  * down.  Normally the work elements would be executed by keventd but that | 
 |  * can deadlock because of linkwatch.  If our close method takes the rtnl | 
 |  * lock and linkwatch is ahead of our work elements in keventd, linkwatch | 
 |  * will block keventd as it needs the rtnl lock, and we'll deadlock waiting | 
 |  * for our work to complete.  Get our own work queue to solve this. | 
 |  */ | 
 | struct workqueue_struct *cxgb3_wq; | 
 |  | 
 | /** | 
 |  *	link_report - show link status and link speed/duplex | 
 |  *	@p: the port whose settings are to be reported | 
 |  * | 
 |  *	Shows the link status, speed, and duplex of a port. | 
 |  */ | 
 | static void link_report(struct net_device *dev) | 
 | { | 
 | 	if (!netif_carrier_ok(dev)) | 
 | 		printk(KERN_INFO "%s: link down\n", dev->name); | 
 | 	else { | 
 | 		const char *s = "10Mbps"; | 
 | 		const struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 		switch (p->link_config.speed) { | 
 | 		case SPEED_10000: | 
 | 			s = "10Gbps"; | 
 | 			break; | 
 | 		case SPEED_1000: | 
 | 			s = "1000Mbps"; | 
 | 			break; | 
 | 		case SPEED_100: | 
 | 			s = "100Mbps"; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s, | 
 | 		       p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); | 
 | 	} | 
 | } | 
 |  | 
 | static void enable_tx_fifo_drain(struct adapter *adapter, | 
 | 				 struct port_info *pi) | 
 | { | 
 | 	t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset, 0, | 
 | 			 F_ENDROPPKT); | 
 | 	t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, 0); | 
 | 	t3_write_reg(adapter, A_XGM_TX_CTRL + pi->mac.offset, F_TXEN); | 
 | 	t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, F_RXEN); | 
 | } | 
 |  | 
 | static void disable_tx_fifo_drain(struct adapter *adapter, | 
 | 				  struct port_info *pi) | 
 | { | 
 | 	t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset, | 
 | 			 F_ENDROPPKT, 0); | 
 | } | 
 |  | 
 | void t3_os_link_fault(struct adapter *adap, int port_id, int state) | 
 | { | 
 | 	struct net_device *dev = adap->port[port_id]; | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 	if (state == netif_carrier_ok(dev)) | 
 | 		return; | 
 |  | 
 | 	if (state) { | 
 | 		struct cmac *mac = &pi->mac; | 
 |  | 
 | 		netif_carrier_on(dev); | 
 |  | 
 | 		disable_tx_fifo_drain(adap, pi); | 
 |  | 
 | 		/* Clear local faults */ | 
 | 		t3_xgm_intr_disable(adap, pi->port_id); | 
 | 		t3_read_reg(adap, A_XGM_INT_STATUS + | 
 | 				    pi->mac.offset); | 
 | 		t3_write_reg(adap, | 
 | 			     A_XGM_INT_CAUSE + pi->mac.offset, | 
 | 			     F_XGM_INT); | 
 |  | 
 | 		t3_set_reg_field(adap, | 
 | 				 A_XGM_INT_ENABLE + | 
 | 				 pi->mac.offset, | 
 | 				 F_XGM_INT, F_XGM_INT); | 
 | 		t3_xgm_intr_enable(adap, pi->port_id); | 
 |  | 
 | 		t3_mac_enable(mac, MAC_DIRECTION_TX); | 
 | 	} else { | 
 | 		netif_carrier_off(dev); | 
 |  | 
 | 		/* Flush TX FIFO */ | 
 | 		enable_tx_fifo_drain(adap, pi); | 
 | 	} | 
 | 	link_report(dev); | 
 | } | 
 |  | 
 | /** | 
 |  *	t3_os_link_changed - handle link status changes | 
 |  *	@adapter: the adapter associated with the link change | 
 |  *	@port_id: the port index whose limk status has changed | 
 |  *	@link_stat: the new status of the link | 
 |  *	@speed: the new speed setting | 
 |  *	@duplex: the new duplex setting | 
 |  *	@pause: the new flow-control setting | 
 |  * | 
 |  *	This is the OS-dependent handler for link status changes.  The OS | 
 |  *	neutral handler takes care of most of the processing for these events, | 
 |  *	then calls this handler for any OS-specific processing. | 
 |  */ | 
 | void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat, | 
 | 			int speed, int duplex, int pause) | 
 | { | 
 | 	struct net_device *dev = adapter->port[port_id]; | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct cmac *mac = &pi->mac; | 
 |  | 
 | 	/* Skip changes from disabled ports. */ | 
 | 	if (!netif_running(dev)) | 
 | 		return; | 
 |  | 
 | 	if (link_stat != netif_carrier_ok(dev)) { | 
 | 		if (link_stat) { | 
 | 			disable_tx_fifo_drain(adapter, pi); | 
 |  | 
 | 			t3_mac_enable(mac, MAC_DIRECTION_RX); | 
 |  | 
 | 			/* Clear local faults */ | 
 | 			t3_xgm_intr_disable(adapter, pi->port_id); | 
 | 			t3_read_reg(adapter, A_XGM_INT_STATUS + | 
 | 				    pi->mac.offset); | 
 | 			t3_write_reg(adapter, | 
 | 				     A_XGM_INT_CAUSE + pi->mac.offset, | 
 | 				     F_XGM_INT); | 
 |  | 
 | 			t3_set_reg_field(adapter, | 
 | 					 A_XGM_INT_ENABLE + pi->mac.offset, | 
 | 					 F_XGM_INT, F_XGM_INT); | 
 | 			t3_xgm_intr_enable(adapter, pi->port_id); | 
 |  | 
 | 			netif_carrier_on(dev); | 
 | 		} else { | 
 | 			netif_carrier_off(dev); | 
 |  | 
 | 			t3_xgm_intr_disable(adapter, pi->port_id); | 
 | 			t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset); | 
 | 			t3_set_reg_field(adapter, | 
 | 					 A_XGM_INT_ENABLE + pi->mac.offset, | 
 | 					 F_XGM_INT, 0); | 
 |  | 
 | 			if (is_10G(adapter)) | 
 | 				pi->phy.ops->power_down(&pi->phy, 1); | 
 |  | 
 | 			t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset); | 
 | 			t3_mac_disable(mac, MAC_DIRECTION_RX); | 
 | 			t3_link_start(&pi->phy, mac, &pi->link_config); | 
 |  | 
 | 			/* Flush TX FIFO */ | 
 | 			enable_tx_fifo_drain(adapter, pi); | 
 | 		} | 
 |  | 
 | 		link_report(dev); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  *	t3_os_phymod_changed - handle PHY module changes | 
 |  *	@phy: the PHY reporting the module change | 
 |  *	@mod_type: new module type | 
 |  * | 
 |  *	This is the OS-dependent handler for PHY module changes.  It is | 
 |  *	invoked when a PHY module is removed or inserted for any OS-specific | 
 |  *	processing. | 
 |  */ | 
 | void t3_os_phymod_changed(struct adapter *adap, int port_id) | 
 | { | 
 | 	static const char *mod_str[] = { | 
 | 		NULL, "SR", "LR", "LRM", "TWINAX", "TWINAX", "unknown" | 
 | 	}; | 
 |  | 
 | 	const struct net_device *dev = adap->port[port_id]; | 
 | 	const struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 	if (pi->phy.modtype == phy_modtype_none) | 
 | 		printk(KERN_INFO "%s: PHY module unplugged\n", dev->name); | 
 | 	else | 
 | 		printk(KERN_INFO "%s: %s PHY module inserted\n", dev->name, | 
 | 		       mod_str[pi->phy.modtype]); | 
 | } | 
 |  | 
 | static void cxgb_set_rxmode(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 	t3_mac_set_rx_mode(&pi->mac, dev); | 
 | } | 
 |  | 
 | /** | 
 |  *	link_start - enable a port | 
 |  *	@dev: the device to enable | 
 |  * | 
 |  *	Performs the MAC and PHY actions needed to enable a port. | 
 |  */ | 
 | static void link_start(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct cmac *mac = &pi->mac; | 
 |  | 
 | 	t3_mac_reset(mac); | 
 | 	t3_mac_set_num_ucast(mac, MAX_MAC_IDX); | 
 | 	t3_mac_set_mtu(mac, dev->mtu); | 
 | 	t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr); | 
 | 	t3_mac_set_address(mac, SAN_MAC_IDX, pi->iscsic.mac_addr); | 
 | 	t3_mac_set_rx_mode(mac, dev); | 
 | 	t3_link_start(&pi->phy, mac, &pi->link_config); | 
 | 	t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); | 
 | } | 
 |  | 
 | static inline void cxgb_disable_msi(struct adapter *adapter) | 
 | { | 
 | 	if (adapter->flags & USING_MSIX) { | 
 | 		pci_disable_msix(adapter->pdev); | 
 | 		adapter->flags &= ~USING_MSIX; | 
 | 	} else if (adapter->flags & USING_MSI) { | 
 | 		pci_disable_msi(adapter->pdev); | 
 | 		adapter->flags &= ~USING_MSI; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Interrupt handler for asynchronous events used with MSI-X. | 
 |  */ | 
 | static irqreturn_t t3_async_intr_handler(int irq, void *cookie) | 
 | { | 
 | 	t3_slow_intr_handler(cookie); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* | 
 |  * Name the MSI-X interrupts. | 
 |  */ | 
 | static void name_msix_vecs(struct adapter *adap) | 
 | { | 
 | 	int i, j, msi_idx = 1, n = sizeof(adap->msix_info[0].desc) - 1; | 
 |  | 
 | 	snprintf(adap->msix_info[0].desc, n, "%s", adap->name); | 
 | 	adap->msix_info[0].desc[n] = 0; | 
 |  | 
 | 	for_each_port(adap, j) { | 
 | 		struct net_device *d = adap->port[j]; | 
 | 		const struct port_info *pi = netdev_priv(d); | 
 |  | 
 | 		for (i = 0; i < pi->nqsets; i++, msi_idx++) { | 
 | 			snprintf(adap->msix_info[msi_idx].desc, n, | 
 | 				 "%s-%d", d->name, pi->first_qset + i); | 
 | 			adap->msix_info[msi_idx].desc[n] = 0; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int request_msix_data_irqs(struct adapter *adap) | 
 | { | 
 | 	int i, j, err, qidx = 0; | 
 |  | 
 | 	for_each_port(adap, i) { | 
 | 		int nqsets = adap2pinfo(adap, i)->nqsets; | 
 |  | 
 | 		for (j = 0; j < nqsets; ++j) { | 
 | 			err = request_irq(adap->msix_info[qidx + 1].vec, | 
 | 					  t3_intr_handler(adap, | 
 | 							  adap->sge.qs[qidx]. | 
 | 							  rspq.polling), 0, | 
 | 					  adap->msix_info[qidx + 1].desc, | 
 | 					  &adap->sge.qs[qidx]); | 
 | 			if (err) { | 
 | 				while (--qidx >= 0) | 
 | 					free_irq(adap->msix_info[qidx + 1].vec, | 
 | 						 &adap->sge.qs[qidx]); | 
 | 				return err; | 
 | 			} | 
 | 			qidx++; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void free_irq_resources(struct adapter *adapter) | 
 | { | 
 | 	if (adapter->flags & USING_MSIX) { | 
 | 		int i, n = 0; | 
 |  | 
 | 		free_irq(adapter->msix_info[0].vec, adapter); | 
 | 		for_each_port(adapter, i) | 
 | 			n += adap2pinfo(adapter, i)->nqsets; | 
 |  | 
 | 		for (i = 0; i < n; ++i) | 
 | 			free_irq(adapter->msix_info[i + 1].vec, | 
 | 				 &adapter->sge.qs[i]); | 
 | 	} else | 
 | 		free_irq(adapter->pdev->irq, adapter); | 
 | } | 
 |  | 
 | static int await_mgmt_replies(struct adapter *adap, unsigned long init_cnt, | 
 | 			      unsigned long n) | 
 | { | 
 | 	int attempts = 5; | 
 |  | 
 | 	while (adap->sge.qs[0].rspq.offload_pkts < init_cnt + n) { | 
 | 		if (!--attempts) | 
 | 			return -ETIMEDOUT; | 
 | 		msleep(10); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int init_tp_parity(struct adapter *adap) | 
 | { | 
 | 	int i; | 
 | 	struct sk_buff *skb; | 
 | 	struct cpl_set_tcb_field *greq; | 
 | 	unsigned long cnt = adap->sge.qs[0].rspq.offload_pkts; | 
 |  | 
 | 	t3_tp_set_offload_mode(adap, 1); | 
 |  | 
 | 	for (i = 0; i < 16; i++) { | 
 | 		struct cpl_smt_write_req *req; | 
 |  | 
 | 		skb = alloc_skb(sizeof(*req), GFP_KERNEL); | 
 | 		if (!skb) | 
 | 			skb = adap->nofail_skb; | 
 | 		if (!skb) | 
 | 			goto alloc_skb_fail; | 
 |  | 
 | 		req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req)); | 
 | 		memset(req, 0, sizeof(*req)); | 
 | 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); | 
 | 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, i)); | 
 | 		req->mtu_idx = NMTUS - 1; | 
 | 		req->iff = i; | 
 | 		t3_mgmt_tx(adap, skb); | 
 | 		if (skb == adap->nofail_skb) { | 
 | 			await_mgmt_replies(adap, cnt, i + 1); | 
 | 			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL); | 
 | 			if (!adap->nofail_skb) | 
 | 				goto alloc_skb_fail; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < 2048; i++) { | 
 | 		struct cpl_l2t_write_req *req; | 
 |  | 
 | 		skb = alloc_skb(sizeof(*req), GFP_KERNEL); | 
 | 		if (!skb) | 
 | 			skb = adap->nofail_skb; | 
 | 		if (!skb) | 
 | 			goto alloc_skb_fail; | 
 |  | 
 | 		req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req)); | 
 | 		memset(req, 0, sizeof(*req)); | 
 | 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); | 
 | 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, i)); | 
 | 		req->params = htonl(V_L2T_W_IDX(i)); | 
 | 		t3_mgmt_tx(adap, skb); | 
 | 		if (skb == adap->nofail_skb) { | 
 | 			await_mgmt_replies(adap, cnt, 16 + i + 1); | 
 | 			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL); | 
 | 			if (!adap->nofail_skb) | 
 | 				goto alloc_skb_fail; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < 2048; i++) { | 
 | 		struct cpl_rte_write_req *req; | 
 |  | 
 | 		skb = alloc_skb(sizeof(*req), GFP_KERNEL); | 
 | 		if (!skb) | 
 | 			skb = adap->nofail_skb; | 
 | 		if (!skb) | 
 | 			goto alloc_skb_fail; | 
 |  | 
 | 		req = (struct cpl_rte_write_req *)__skb_put(skb, sizeof(*req)); | 
 | 		memset(req, 0, sizeof(*req)); | 
 | 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); | 
 | 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RTE_WRITE_REQ, i)); | 
 | 		req->l2t_idx = htonl(V_L2T_W_IDX(i)); | 
 | 		t3_mgmt_tx(adap, skb); | 
 | 		if (skb == adap->nofail_skb) { | 
 | 			await_mgmt_replies(adap, cnt, 16 + 2048 + i + 1); | 
 | 			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL); | 
 | 			if (!adap->nofail_skb) | 
 | 				goto alloc_skb_fail; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	skb = alloc_skb(sizeof(*greq), GFP_KERNEL); | 
 | 	if (!skb) | 
 | 		skb = adap->nofail_skb; | 
 | 	if (!skb) | 
 | 		goto alloc_skb_fail; | 
 |  | 
 | 	greq = (struct cpl_set_tcb_field *)__skb_put(skb, sizeof(*greq)); | 
 | 	memset(greq, 0, sizeof(*greq)); | 
 | 	greq->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); | 
 | 	OPCODE_TID(greq) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, 0)); | 
 | 	greq->mask = cpu_to_be64(1); | 
 | 	t3_mgmt_tx(adap, skb); | 
 |  | 
 | 	i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1); | 
 | 	if (skb == adap->nofail_skb) { | 
 | 		i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1); | 
 | 		adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL); | 
 | 	} | 
 |  | 
 | 	t3_tp_set_offload_mode(adap, 0); | 
 | 	return i; | 
 |  | 
 | alloc_skb_fail: | 
 | 	t3_tp_set_offload_mode(adap, 0); | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | /** | 
 |  *	setup_rss - configure RSS | 
 |  *	@adap: the adapter | 
 |  * | 
 |  *	Sets up RSS to distribute packets to multiple receive queues.  We | 
 |  *	configure the RSS CPU lookup table to distribute to the number of HW | 
 |  *	receive queues, and the response queue lookup table to narrow that | 
 |  *	down to the response queues actually configured for each port. | 
 |  *	We always configure the RSS mapping for two ports since the mapping | 
 |  *	table has plenty of entries. | 
 |  */ | 
 | static void setup_rss(struct adapter *adap) | 
 | { | 
 | 	int i; | 
 | 	unsigned int nq0 = adap2pinfo(adap, 0)->nqsets; | 
 | 	unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1; | 
 | 	u8 cpus[SGE_QSETS + 1]; | 
 | 	u16 rspq_map[RSS_TABLE_SIZE]; | 
 |  | 
 | 	for (i = 0; i < SGE_QSETS; ++i) | 
 | 		cpus[i] = i; | 
 | 	cpus[SGE_QSETS] = 0xff;	/* terminator */ | 
 |  | 
 | 	for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) { | 
 | 		rspq_map[i] = i % nq0; | 
 | 		rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0; | 
 | 	} | 
 |  | 
 | 	t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN | | 
 | 		      F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN | | 
 | 		      V_RRCPLCPUSIZE(6) | F_HASHTOEPLITZ, cpus, rspq_map); | 
 | } | 
 |  | 
 | static void ring_dbs(struct adapter *adap) | 
 | { | 
 | 	int i, j; | 
 |  | 
 | 	for (i = 0; i < SGE_QSETS; i++) { | 
 | 		struct sge_qset *qs = &adap->sge.qs[i]; | 
 |  | 
 | 		if (qs->adap) | 
 | 			for (j = 0; j < SGE_TXQ_PER_SET; j++) | 
 | 				t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX | V_EGRCNTX(qs->txq[j].cntxt_id)); | 
 | 	} | 
 | } | 
 |  | 
 | static void init_napi(struct adapter *adap) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < SGE_QSETS; i++) { | 
 | 		struct sge_qset *qs = &adap->sge.qs[i]; | 
 |  | 
 | 		if (qs->adap) | 
 | 			netif_napi_add(qs->netdev, &qs->napi, qs->napi.poll, | 
 | 				       64); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * netif_napi_add() can be called only once per napi_struct because it | 
 | 	 * adds each new napi_struct to a list.  Be careful not to call it a | 
 | 	 * second time, e.g., during EEH recovery, by making a note of it. | 
 | 	 */ | 
 | 	adap->flags |= NAPI_INIT; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait until all NAPI handlers are descheduled.  This includes the handlers of | 
 |  * both netdevices representing interfaces and the dummy ones for the extra | 
 |  * queues. | 
 |  */ | 
 | static void quiesce_rx(struct adapter *adap) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < SGE_QSETS; i++) | 
 | 		if (adap->sge.qs[i].adap) | 
 | 			napi_disable(&adap->sge.qs[i].napi); | 
 | } | 
 |  | 
 | static void enable_all_napi(struct adapter *adap) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < SGE_QSETS; i++) | 
 | 		if (adap->sge.qs[i].adap) | 
 | 			napi_enable(&adap->sge.qs[i].napi); | 
 | } | 
 |  | 
 | /** | 
 |  *	set_qset_lro - Turn a queue set's LRO capability on and off | 
 |  *	@dev: the device the qset is attached to | 
 |  *	@qset_idx: the queue set index | 
 |  *	@val: the LRO switch | 
 |  * | 
 |  *	Sets LRO on or off for a particular queue set. | 
 |  *	the device's features flag is updated to reflect the LRO | 
 |  *	capability when all queues belonging to the device are | 
 |  *	in the same state. | 
 |  */ | 
 | static void set_qset_lro(struct net_device *dev, int qset_idx, int val) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	adapter->params.sge.qset[qset_idx].lro = !!val; | 
 | 	adapter->sge.qs[qset_idx].lro_enabled = !!val; | 
 | } | 
 |  | 
 | /** | 
 |  *	setup_sge_qsets - configure SGE Tx/Rx/response queues | 
 |  *	@adap: the adapter | 
 |  * | 
 |  *	Determines how many sets of SGE queues to use and initializes them. | 
 |  *	We support multiple queue sets per port if we have MSI-X, otherwise | 
 |  *	just one queue set per port. | 
 |  */ | 
 | static int setup_sge_qsets(struct adapter *adap) | 
 | { | 
 | 	int i, j, err, irq_idx = 0, qset_idx = 0; | 
 | 	unsigned int ntxq = SGE_TXQ_PER_SET; | 
 |  | 
 | 	if (adap->params.rev > 0 && !(adap->flags & USING_MSI)) | 
 | 		irq_idx = -1; | 
 |  | 
 | 	for_each_port(adap, i) { | 
 | 		struct net_device *dev = adap->port[i]; | 
 | 		struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 		pi->qs = &adap->sge.qs[pi->first_qset]; | 
 | 		for (j = 0; j < pi->nqsets; ++j, ++qset_idx) { | 
 | 			set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO); | 
 | 			err = t3_sge_alloc_qset(adap, qset_idx, 1, | 
 | 				(adap->flags & USING_MSIX) ? qset_idx + 1 : | 
 | 							     irq_idx, | 
 | 				&adap->params.sge.qset[qset_idx], ntxq, dev, | 
 | 				netdev_get_tx_queue(dev, j)); | 
 | 			if (err) { | 
 | 				t3_free_sge_resources(adap); | 
 | 				return err; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t attr_show(struct device *d, char *buf, | 
 | 			 ssize_t(*format) (struct net_device *, char *)) | 
 | { | 
 | 	ssize_t len; | 
 |  | 
 | 	/* Synchronize with ioctls that may shut down the device */ | 
 | 	rtnl_lock(); | 
 | 	len = (*format) (to_net_dev(d), buf); | 
 | 	rtnl_unlock(); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t attr_store(struct device *d, | 
 | 			  const char *buf, size_t len, | 
 | 			  ssize_t(*set) (struct net_device *, unsigned int), | 
 | 			  unsigned int min_val, unsigned int max_val) | 
 | { | 
 | 	char *endp; | 
 | 	ssize_t ret; | 
 | 	unsigned int val; | 
 |  | 
 | 	if (!capable(CAP_NET_ADMIN)) | 
 | 		return -EPERM; | 
 |  | 
 | 	val = simple_strtoul(buf, &endp, 0); | 
 | 	if (endp == buf || val < min_val || val > max_val) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rtnl_lock(); | 
 | 	ret = (*set) (to_net_dev(d), val); | 
 | 	if (!ret) | 
 | 		ret = len; | 
 | 	rtnl_unlock(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | #define CXGB3_SHOW(name, val_expr) \ | 
 | static ssize_t format_##name(struct net_device *dev, char *buf) \ | 
 | { \ | 
 | 	struct port_info *pi = netdev_priv(dev); \ | 
 | 	struct adapter *adap = pi->adapter; \ | 
 | 	return sprintf(buf, "%u\n", val_expr); \ | 
 | } \ | 
 | static ssize_t show_##name(struct device *d, struct device_attribute *attr, \ | 
 | 			   char *buf) \ | 
 | { \ | 
 | 	return attr_show(d, buf, format_##name); \ | 
 | } | 
 |  | 
 | static ssize_t set_nfilters(struct net_device *dev, unsigned int val) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adap = pi->adapter; | 
 | 	int min_tids = is_offload(adap) ? MC5_MIN_TIDS : 0; | 
 |  | 
 | 	if (adap->flags & FULL_INIT_DONE) | 
 | 		return -EBUSY; | 
 | 	if (val && adap->params.rev == 0) | 
 | 		return -EINVAL; | 
 | 	if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers - | 
 | 	    min_tids) | 
 | 		return -EINVAL; | 
 | 	adap->params.mc5.nfilters = val; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t store_nfilters(struct device *d, struct device_attribute *attr, | 
 | 			      const char *buf, size_t len) | 
 | { | 
 | 	return attr_store(d, buf, len, set_nfilters, 0, ~0); | 
 | } | 
 |  | 
 | static ssize_t set_nservers(struct net_device *dev, unsigned int val) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adap = pi->adapter; | 
 |  | 
 | 	if (adap->flags & FULL_INIT_DONE) | 
 | 		return -EBUSY; | 
 | 	if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters - | 
 | 	    MC5_MIN_TIDS) | 
 | 		return -EINVAL; | 
 | 	adap->params.mc5.nservers = val; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t store_nservers(struct device *d, struct device_attribute *attr, | 
 | 			      const char *buf, size_t len) | 
 | { | 
 | 	return attr_store(d, buf, len, set_nservers, 0, ~0); | 
 | } | 
 |  | 
 | #define CXGB3_ATTR_R(name, val_expr) \ | 
 | CXGB3_SHOW(name, val_expr) \ | 
 | static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) | 
 |  | 
 | #define CXGB3_ATTR_RW(name, val_expr, store_method) \ | 
 | CXGB3_SHOW(name, val_expr) \ | 
 | static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method) | 
 |  | 
 | CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5)); | 
 | CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters); | 
 | CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers); | 
 |  | 
 | static struct attribute *cxgb3_attrs[] = { | 
 | 	&dev_attr_cam_size.attr, | 
 | 	&dev_attr_nfilters.attr, | 
 | 	&dev_attr_nservers.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs }; | 
 |  | 
 | static ssize_t tm_attr_show(struct device *d, | 
 | 			    char *buf, int sched) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(to_net_dev(d)); | 
 | 	struct adapter *adap = pi->adapter; | 
 | 	unsigned int v, addr, bpt, cpt; | 
 | 	ssize_t len; | 
 |  | 
 | 	addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2; | 
 | 	rtnl_lock(); | 
 | 	t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr); | 
 | 	v = t3_read_reg(adap, A_TP_TM_PIO_DATA); | 
 | 	if (sched & 1) | 
 | 		v >>= 16; | 
 | 	bpt = (v >> 8) & 0xff; | 
 | 	cpt = v & 0xff; | 
 | 	if (!cpt) | 
 | 		len = sprintf(buf, "disabled\n"); | 
 | 	else { | 
 | 		v = (adap->params.vpd.cclk * 1000) / cpt; | 
 | 		len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125); | 
 | 	} | 
 | 	rtnl_unlock(); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t tm_attr_store(struct device *d, | 
 | 			     const char *buf, size_t len, int sched) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(to_net_dev(d)); | 
 | 	struct adapter *adap = pi->adapter; | 
 | 	unsigned int val; | 
 | 	char *endp; | 
 | 	ssize_t ret; | 
 |  | 
 | 	if (!capable(CAP_NET_ADMIN)) | 
 | 		return -EPERM; | 
 |  | 
 | 	val = simple_strtoul(buf, &endp, 0); | 
 | 	if (endp == buf || val > 10000000) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rtnl_lock(); | 
 | 	ret = t3_config_sched(adap, val, sched); | 
 | 	if (!ret) | 
 | 		ret = len; | 
 | 	rtnl_unlock(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | #define TM_ATTR(name, sched) \ | 
 | static ssize_t show_##name(struct device *d, struct device_attribute *attr, \ | 
 | 			   char *buf) \ | 
 | { \ | 
 | 	return tm_attr_show(d, buf, sched); \ | 
 | } \ | 
 | static ssize_t store_##name(struct device *d, struct device_attribute *attr, \ | 
 | 			    const char *buf, size_t len) \ | 
 | { \ | 
 | 	return tm_attr_store(d, buf, len, sched); \ | 
 | } \ | 
 | static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name) | 
 |  | 
 | TM_ATTR(sched0, 0); | 
 | TM_ATTR(sched1, 1); | 
 | TM_ATTR(sched2, 2); | 
 | TM_ATTR(sched3, 3); | 
 | TM_ATTR(sched4, 4); | 
 | TM_ATTR(sched5, 5); | 
 | TM_ATTR(sched6, 6); | 
 | TM_ATTR(sched7, 7); | 
 |  | 
 | static struct attribute *offload_attrs[] = { | 
 | 	&dev_attr_sched0.attr, | 
 | 	&dev_attr_sched1.attr, | 
 | 	&dev_attr_sched2.attr, | 
 | 	&dev_attr_sched3.attr, | 
 | 	&dev_attr_sched4.attr, | 
 | 	&dev_attr_sched5.attr, | 
 | 	&dev_attr_sched6.attr, | 
 | 	&dev_attr_sched7.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static struct attribute_group offload_attr_group = {.attrs = offload_attrs }; | 
 |  | 
 | /* | 
 |  * Sends an sk_buff to an offload queue driver | 
 |  * after dealing with any active network taps. | 
 |  */ | 
 | static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	local_bh_disable(); | 
 | 	ret = t3_offload_tx(tdev, skb); | 
 | 	local_bh_enable(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int write_smt_entry(struct adapter *adapter, int idx) | 
 | { | 
 | 	struct cpl_smt_write_req *req; | 
 | 	struct port_info *pi = netdev_priv(adapter->port[idx]); | 
 | 	struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL); | 
 |  | 
 | 	if (!skb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req)); | 
 | 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); | 
 | 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx)); | 
 | 	req->mtu_idx = NMTUS - 1;	/* should be 0 but there's a T3 bug */ | 
 | 	req->iff = idx; | 
 | 	memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN); | 
 | 	memcpy(req->src_mac1, pi->iscsic.mac_addr, ETH_ALEN); | 
 | 	skb->priority = 1; | 
 | 	offload_tx(&adapter->tdev, skb); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int init_smt(struct adapter *adapter) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for_each_port(adapter, i) | 
 | 	    write_smt_entry(adapter, i); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void init_port_mtus(struct adapter *adapter) | 
 | { | 
 | 	unsigned int mtus = adapter->port[0]->mtu; | 
 |  | 
 | 	if (adapter->port[1]) | 
 | 		mtus |= adapter->port[1]->mtu << 16; | 
 | 	t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus); | 
 | } | 
 |  | 
 | static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo, | 
 | 			      int hi, int port) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct mngt_pktsched_wr *req; | 
 | 	int ret; | 
 |  | 
 | 	skb = alloc_skb(sizeof(*req), GFP_KERNEL); | 
 | 	if (!skb) | 
 | 		skb = adap->nofail_skb; | 
 | 	if (!skb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req)); | 
 | 	req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT)); | 
 | 	req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET; | 
 | 	req->sched = sched; | 
 | 	req->idx = qidx; | 
 | 	req->min = lo; | 
 | 	req->max = hi; | 
 | 	req->binding = port; | 
 | 	ret = t3_mgmt_tx(adap, skb); | 
 | 	if (skb == adap->nofail_skb) { | 
 | 		adap->nofail_skb = alloc_skb(sizeof(struct cpl_set_tcb_field), | 
 | 					     GFP_KERNEL); | 
 | 		if (!adap->nofail_skb) | 
 | 			ret = -ENOMEM; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int bind_qsets(struct adapter *adap) | 
 | { | 
 | 	int i, j, err = 0; | 
 |  | 
 | 	for_each_port(adap, i) { | 
 | 		const struct port_info *pi = adap2pinfo(adap, i); | 
 |  | 
 | 		for (j = 0; j < pi->nqsets; ++j) { | 
 | 			int ret = send_pktsched_cmd(adap, 1, | 
 | 						    pi->first_qset + j, -1, | 
 | 						    -1, i); | 
 | 			if (ret) | 
 | 				err = ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | #define FW_VERSION __stringify(FW_VERSION_MAJOR) "."			\ | 
 | 	__stringify(FW_VERSION_MINOR) "." __stringify(FW_VERSION_MICRO) | 
 | #define FW_FNAME "cxgb3/t3fw-" FW_VERSION ".bin" | 
 | #define TPSRAM_VERSION __stringify(TP_VERSION_MAJOR) "."		\ | 
 | 	__stringify(TP_VERSION_MINOR) "." __stringify(TP_VERSION_MICRO) | 
 | #define TPSRAM_NAME "cxgb3/t3%c_psram-" TPSRAM_VERSION ".bin" | 
 | #define AEL2005_OPT_EDC_NAME "cxgb3/ael2005_opt_edc.bin" | 
 | #define AEL2005_TWX_EDC_NAME "cxgb3/ael2005_twx_edc.bin" | 
 | #define AEL2020_TWX_EDC_NAME "cxgb3/ael2020_twx_edc.bin" | 
 | MODULE_FIRMWARE(FW_FNAME); | 
 | MODULE_FIRMWARE("cxgb3/t3b_psram-" TPSRAM_VERSION ".bin"); | 
 | MODULE_FIRMWARE("cxgb3/t3c_psram-" TPSRAM_VERSION ".bin"); | 
 | MODULE_FIRMWARE(AEL2005_OPT_EDC_NAME); | 
 | MODULE_FIRMWARE(AEL2005_TWX_EDC_NAME); | 
 | MODULE_FIRMWARE(AEL2020_TWX_EDC_NAME); | 
 |  | 
 | static inline const char *get_edc_fw_name(int edc_idx) | 
 | { | 
 | 	const char *fw_name = NULL; | 
 |  | 
 | 	switch (edc_idx) { | 
 | 	case EDC_OPT_AEL2005: | 
 | 		fw_name = AEL2005_OPT_EDC_NAME; | 
 | 		break; | 
 | 	case EDC_TWX_AEL2005: | 
 | 		fw_name = AEL2005_TWX_EDC_NAME; | 
 | 		break; | 
 | 	case EDC_TWX_AEL2020: | 
 | 		fw_name = AEL2020_TWX_EDC_NAME; | 
 | 		break; | 
 | 	} | 
 | 	return fw_name; | 
 | } | 
 |  | 
 | int t3_get_edc_fw(struct cphy *phy, int edc_idx, int size) | 
 | { | 
 | 	struct adapter *adapter = phy->adapter; | 
 | 	const struct firmware *fw; | 
 | 	char buf[64]; | 
 | 	u32 csum; | 
 | 	const __be32 *p; | 
 | 	u16 *cache = phy->phy_cache; | 
 | 	int i, ret; | 
 |  | 
 | 	snprintf(buf, sizeof(buf), get_edc_fw_name(edc_idx)); | 
 |  | 
 | 	ret = request_firmware(&fw, buf, &adapter->pdev->dev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"could not upgrade firmware: unable to load %s\n", | 
 | 			buf); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* check size, take checksum in account */ | 
 | 	if (fw->size > size + 4) { | 
 | 		CH_ERR(adapter, "firmware image too large %u, expected %d\n", | 
 | 		       (unsigned int)fw->size, size + 4); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* compute checksum */ | 
 | 	p = (const __be32 *)fw->data; | 
 | 	for (csum = 0, i = 0; i < fw->size / sizeof(csum); i++) | 
 | 		csum += ntohl(p[i]); | 
 |  | 
 | 	if (csum != 0xffffffff) { | 
 | 		CH_ERR(adapter, "corrupted firmware image, checksum %u\n", | 
 | 		       csum); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < size / 4 ; i++) { | 
 | 		*cache++ = (be32_to_cpu(p[i]) & 0xffff0000) >> 16; | 
 | 		*cache++ = be32_to_cpu(p[i]) & 0xffff; | 
 | 	} | 
 |  | 
 | 	release_firmware(fw); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int upgrade_fw(struct adapter *adap) | 
 | { | 
 | 	int ret; | 
 | 	const struct firmware *fw; | 
 | 	struct device *dev = &adap->pdev->dev; | 
 |  | 
 | 	ret = request_firmware(&fw, FW_FNAME, dev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "could not upgrade firmware: unable to load %s\n", | 
 | 			FW_FNAME); | 
 | 		return ret; | 
 | 	} | 
 | 	ret = t3_load_fw(adap, fw->data, fw->size); | 
 | 	release_firmware(fw); | 
 |  | 
 | 	if (ret == 0) | 
 | 		dev_info(dev, "successful upgrade to firmware %d.%d.%d\n", | 
 | 			 FW_VERSION_MAJOR, FW_VERSION_MINOR, FW_VERSION_MICRO); | 
 | 	else | 
 | 		dev_err(dev, "failed to upgrade to firmware %d.%d.%d\n", | 
 | 			FW_VERSION_MAJOR, FW_VERSION_MINOR, FW_VERSION_MICRO); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline char t3rev2char(struct adapter *adapter) | 
 | { | 
 | 	char rev = 0; | 
 |  | 
 | 	switch(adapter->params.rev) { | 
 | 	case T3_REV_B: | 
 | 	case T3_REV_B2: | 
 | 		rev = 'b'; | 
 | 		break; | 
 | 	case T3_REV_C: | 
 | 		rev = 'c'; | 
 | 		break; | 
 | 	} | 
 | 	return rev; | 
 | } | 
 |  | 
 | static int update_tpsram(struct adapter *adap) | 
 | { | 
 | 	const struct firmware *tpsram; | 
 | 	char buf[64]; | 
 | 	struct device *dev = &adap->pdev->dev; | 
 | 	int ret; | 
 | 	char rev; | 
 |  | 
 | 	rev = t3rev2char(adap); | 
 | 	if (!rev) | 
 | 		return 0; | 
 |  | 
 | 	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev); | 
 |  | 
 | 	ret = request_firmware(&tpsram, buf, dev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "could not load TP SRAM: unable to load %s\n", | 
 | 			buf); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = t3_check_tpsram(adap, tpsram->data, tpsram->size); | 
 | 	if (ret) | 
 | 		goto release_tpsram; | 
 |  | 
 | 	ret = t3_set_proto_sram(adap, tpsram->data); | 
 | 	if (ret == 0) | 
 | 		dev_info(dev, | 
 | 			 "successful update of protocol engine " | 
 | 			 "to %d.%d.%d\n", | 
 | 			 TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO); | 
 | 	else | 
 | 		dev_err(dev, "failed to update of protocol engine %d.%d.%d\n", | 
 | 			TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO); | 
 | 	if (ret) | 
 | 		dev_err(dev, "loading protocol SRAM failed\n"); | 
 |  | 
 | release_tpsram: | 
 | 	release_firmware(tpsram); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  *	cxgb_up - enable the adapter | 
 |  *	@adapter: adapter being enabled | 
 |  * | 
 |  *	Called when the first port is enabled, this function performs the | 
 |  *	actions necessary to make an adapter operational, such as completing | 
 |  *	the initialization of HW modules, and enabling interrupts. | 
 |  * | 
 |  *	Must be called with the rtnl lock held. | 
 |  */ | 
 | static int cxgb_up(struct adapter *adap) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (!(adap->flags & FULL_INIT_DONE)) { | 
 | 		err = t3_check_fw_version(adap); | 
 | 		if (err == -EINVAL) { | 
 | 			err = upgrade_fw(adap); | 
 | 			CH_WARN(adap, "FW upgrade to %d.%d.%d %s\n", | 
 | 				FW_VERSION_MAJOR, FW_VERSION_MINOR, | 
 | 				FW_VERSION_MICRO, err ? "failed" : "succeeded"); | 
 | 		} | 
 |  | 
 | 		err = t3_check_tpsram_version(adap); | 
 | 		if (err == -EINVAL) { | 
 | 			err = update_tpsram(adap); | 
 | 			CH_WARN(adap, "TP upgrade to %d.%d.%d %s\n", | 
 | 				TP_VERSION_MAJOR, TP_VERSION_MINOR, | 
 | 				TP_VERSION_MICRO, err ? "failed" : "succeeded"); | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Clear interrupts now to catch errors if t3_init_hw fails. | 
 | 		 * We clear them again later as initialization may trigger | 
 | 		 * conditions that can interrupt. | 
 | 		 */ | 
 | 		t3_intr_clear(adap); | 
 |  | 
 | 		err = t3_init_hw(adap, 0); | 
 | 		if (err) | 
 | 			goto out; | 
 |  | 
 | 		t3_set_reg_field(adap, A_TP_PARA_REG5, 0, F_RXDDPOFFINIT); | 
 | 		t3_write_reg(adap, A_ULPRX_TDDP_PSZ, V_HPZ0(PAGE_SHIFT - 12)); | 
 |  | 
 | 		err = setup_sge_qsets(adap); | 
 | 		if (err) | 
 | 			goto out; | 
 |  | 
 | 		setup_rss(adap); | 
 | 		if (!(adap->flags & NAPI_INIT)) | 
 | 			init_napi(adap); | 
 |  | 
 | 		t3_start_sge_timers(adap); | 
 | 		adap->flags |= FULL_INIT_DONE; | 
 | 	} | 
 |  | 
 | 	t3_intr_clear(adap); | 
 |  | 
 | 	if (adap->flags & USING_MSIX) { | 
 | 		name_msix_vecs(adap); | 
 | 		err = request_irq(adap->msix_info[0].vec, | 
 | 				  t3_async_intr_handler, 0, | 
 | 				  adap->msix_info[0].desc, adap); | 
 | 		if (err) | 
 | 			goto irq_err; | 
 |  | 
 | 		err = request_msix_data_irqs(adap); | 
 | 		if (err) { | 
 | 			free_irq(adap->msix_info[0].vec, adap); | 
 | 			goto irq_err; | 
 | 		} | 
 | 	} else if ((err = request_irq(adap->pdev->irq, | 
 | 				      t3_intr_handler(adap, | 
 | 						      adap->sge.qs[0].rspq. | 
 | 						      polling), | 
 | 				      (adap->flags & USING_MSI) ? | 
 | 				       0 : IRQF_SHARED, | 
 | 				      adap->name, adap))) | 
 | 		goto irq_err; | 
 |  | 
 | 	enable_all_napi(adap); | 
 | 	t3_sge_start(adap); | 
 | 	t3_intr_enable(adap); | 
 |  | 
 | 	if (adap->params.rev >= T3_REV_C && !(adap->flags & TP_PARITY_INIT) && | 
 | 	    is_offload(adap) && init_tp_parity(adap) == 0) | 
 | 		adap->flags |= TP_PARITY_INIT; | 
 |  | 
 | 	if (adap->flags & TP_PARITY_INIT) { | 
 | 		t3_write_reg(adap, A_TP_INT_CAUSE, | 
 | 			     F_CMCACHEPERR | F_ARPLUTPERR); | 
 | 		t3_write_reg(adap, A_TP_INT_ENABLE, 0x7fbfffff); | 
 | 	} | 
 |  | 
 | 	if (!(adap->flags & QUEUES_BOUND)) { | 
 | 		err = bind_qsets(adap); | 
 | 		if (err) { | 
 | 			CH_ERR(adap, "failed to bind qsets, err %d\n", err); | 
 | 			t3_intr_disable(adap); | 
 | 			free_irq_resources(adap); | 
 | 			goto out; | 
 | 		} | 
 | 		adap->flags |= QUEUES_BOUND; | 
 | 	} | 
 |  | 
 | out: | 
 | 	return err; | 
 | irq_err: | 
 | 	CH_ERR(adap, "request_irq failed, err %d\n", err); | 
 | 	goto out; | 
 | } | 
 |  | 
 | /* | 
 |  * Release resources when all the ports and offloading have been stopped. | 
 |  */ | 
 | static void cxgb_down(struct adapter *adapter) | 
 | { | 
 | 	t3_sge_stop(adapter); | 
 | 	spin_lock_irq(&adapter->work_lock);	/* sync with PHY intr task */ | 
 | 	t3_intr_disable(adapter); | 
 | 	spin_unlock_irq(&adapter->work_lock); | 
 |  | 
 | 	free_irq_resources(adapter); | 
 | 	quiesce_rx(adapter); | 
 | 	t3_sge_stop(adapter); | 
 | 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */ | 
 | } | 
 |  | 
 | static void schedule_chk_task(struct adapter *adap) | 
 | { | 
 | 	unsigned int timeo; | 
 |  | 
 | 	timeo = adap->params.linkpoll_period ? | 
 | 	    (HZ * adap->params.linkpoll_period) / 10 : | 
 | 	    adap->params.stats_update_period * HZ; | 
 | 	if (timeo) | 
 | 		queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo); | 
 | } | 
 |  | 
 | static int offload_open(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct t3cdev *tdev = dev2t3cdev(dev); | 
 | 	int adap_up = adapter->open_device_map & PORT_MASK; | 
 | 	int err; | 
 |  | 
 | 	if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) | 
 | 		return 0; | 
 |  | 
 | 	if (!adap_up && (err = cxgb_up(adapter)) < 0) | 
 | 		goto out; | 
 |  | 
 | 	t3_tp_set_offload_mode(adapter, 1); | 
 | 	tdev->lldev = adapter->port[0]; | 
 | 	err = cxgb3_offload_activate(adapter); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	init_port_mtus(adapter); | 
 | 	t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd, | 
 | 		     adapter->params.b_wnd, | 
 | 		     adapter->params.rev == 0 ? | 
 | 		     adapter->port[0]->mtu : 0xffff); | 
 | 	init_smt(adapter); | 
 |  | 
 | 	if (sysfs_create_group(&tdev->lldev->dev.kobj, &offload_attr_group)) | 
 | 		dev_dbg(&dev->dev, "cannot create sysfs group\n"); | 
 |  | 
 | 	/* Call back all registered clients */ | 
 | 	cxgb3_add_clients(tdev); | 
 |  | 
 | out: | 
 | 	/* restore them in case the offload module has changed them */ | 
 | 	if (err) { | 
 | 		t3_tp_set_offload_mode(adapter, 0); | 
 | 		clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); | 
 | 		cxgb3_set_dummy_ops(tdev); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static int offload_close(struct t3cdev *tdev) | 
 | { | 
 | 	struct adapter *adapter = tdev2adap(tdev); | 
 |  | 
 | 	if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) | 
 | 		return 0; | 
 |  | 
 | 	/* Call back all registered clients */ | 
 | 	cxgb3_remove_clients(tdev); | 
 |  | 
 | 	sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group); | 
 |  | 
 | 	/* Flush work scheduled while releasing TIDs */ | 
 | 	flush_scheduled_work(); | 
 |  | 
 | 	tdev->lldev = NULL; | 
 | 	cxgb3_set_dummy_ops(tdev); | 
 | 	t3_tp_set_offload_mode(adapter, 0); | 
 | 	clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); | 
 |  | 
 | 	if (!adapter->open_device_map) | 
 | 		cxgb_down(adapter); | 
 |  | 
 | 	cxgb3_offload_deactivate(adapter); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxgb_open(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	int other_ports = adapter->open_device_map & PORT_MASK; | 
 | 	int err; | 
 |  | 
 | 	if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) | 
 | 		return err; | 
 |  | 
 | 	set_bit(pi->port_id, &adapter->open_device_map); | 
 | 	if (is_offload(adapter) && !ofld_disable) { | 
 | 		err = offload_open(dev); | 
 | 		if (err) | 
 | 			printk(KERN_WARNING | 
 | 			       "Could not initialize offload capabilities\n"); | 
 | 	} | 
 |  | 
 | 	dev->real_num_tx_queues = pi->nqsets; | 
 | 	link_start(dev); | 
 | 	t3_port_intr_enable(adapter, pi->port_id); | 
 | 	netif_tx_start_all_queues(dev); | 
 | 	if (!other_ports) | 
 | 		schedule_chk_task(adapter); | 
 |  | 
 | 	cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_UP, pi->port_id); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxgb_close(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	 | 
 | 	if (!adapter->open_device_map) | 
 | 		return 0; | 
 |  | 
 | 	/* Stop link fault interrupts */ | 
 | 	t3_xgm_intr_disable(adapter, pi->port_id); | 
 | 	t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset); | 
 |  | 
 | 	t3_port_intr_disable(adapter, pi->port_id); | 
 | 	netif_tx_stop_all_queues(dev); | 
 | 	pi->phy.ops->power_down(&pi->phy, 1); | 
 | 	netif_carrier_off(dev); | 
 | 	t3_mac_disable(&pi->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); | 
 |  | 
 | 	spin_lock_irq(&adapter->work_lock);	/* sync with update task */ | 
 | 	clear_bit(pi->port_id, &adapter->open_device_map); | 
 | 	spin_unlock_irq(&adapter->work_lock); | 
 |  | 
 | 	if (!(adapter->open_device_map & PORT_MASK)) | 
 | 		cancel_delayed_work_sync(&adapter->adap_check_task); | 
 |  | 
 | 	if (!adapter->open_device_map) | 
 | 		cxgb_down(adapter); | 
 |  | 
 | 	cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_DOWN, pi->port_id); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct net_device_stats *cxgb_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct net_device_stats *ns = &pi->netstats; | 
 | 	const struct mac_stats *pstats; | 
 |  | 
 | 	spin_lock(&adapter->stats_lock); | 
 | 	pstats = t3_mac_update_stats(&pi->mac); | 
 | 	spin_unlock(&adapter->stats_lock); | 
 |  | 
 | 	ns->tx_bytes = pstats->tx_octets; | 
 | 	ns->tx_packets = pstats->tx_frames; | 
 | 	ns->rx_bytes = pstats->rx_octets; | 
 | 	ns->rx_packets = pstats->rx_frames; | 
 | 	ns->multicast = pstats->rx_mcast_frames; | 
 |  | 
 | 	ns->tx_errors = pstats->tx_underrun; | 
 | 	ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs + | 
 | 	    pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short + | 
 | 	    pstats->rx_fifo_ovfl; | 
 |  | 
 | 	/* detailed rx_errors */ | 
 | 	ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long; | 
 | 	ns->rx_over_errors = 0; | 
 | 	ns->rx_crc_errors = pstats->rx_fcs_errs; | 
 | 	ns->rx_frame_errors = pstats->rx_symbol_errs; | 
 | 	ns->rx_fifo_errors = pstats->rx_fifo_ovfl; | 
 | 	ns->rx_missed_errors = pstats->rx_cong_drops; | 
 |  | 
 | 	/* detailed tx_errors */ | 
 | 	ns->tx_aborted_errors = 0; | 
 | 	ns->tx_carrier_errors = 0; | 
 | 	ns->tx_fifo_errors = pstats->tx_underrun; | 
 | 	ns->tx_heartbeat_errors = 0; | 
 | 	ns->tx_window_errors = 0; | 
 | 	return ns; | 
 | } | 
 |  | 
 | static u32 get_msglevel(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	return adapter->msg_enable; | 
 | } | 
 |  | 
 | static void set_msglevel(struct net_device *dev, u32 val) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	adapter->msg_enable = val; | 
 | } | 
 |  | 
 | static char stats_strings[][ETH_GSTRING_LEN] = { | 
 | 	"TxOctetsOK         ", | 
 | 	"TxFramesOK         ", | 
 | 	"TxMulticastFramesOK", | 
 | 	"TxBroadcastFramesOK", | 
 | 	"TxPauseFrames      ", | 
 | 	"TxUnderrun         ", | 
 | 	"TxExtUnderrun      ", | 
 |  | 
 | 	"TxFrames64         ", | 
 | 	"TxFrames65To127    ", | 
 | 	"TxFrames128To255   ", | 
 | 	"TxFrames256To511   ", | 
 | 	"TxFrames512To1023  ", | 
 | 	"TxFrames1024To1518 ", | 
 | 	"TxFrames1519ToMax  ", | 
 |  | 
 | 	"RxOctetsOK         ", | 
 | 	"RxFramesOK         ", | 
 | 	"RxMulticastFramesOK", | 
 | 	"RxBroadcastFramesOK", | 
 | 	"RxPauseFrames      ", | 
 | 	"RxFCSErrors        ", | 
 | 	"RxSymbolErrors     ", | 
 | 	"RxShortErrors      ", | 
 | 	"RxJabberErrors     ", | 
 | 	"RxLengthErrors     ", | 
 | 	"RxFIFOoverflow     ", | 
 |  | 
 | 	"RxFrames64         ", | 
 | 	"RxFrames65To127    ", | 
 | 	"RxFrames128To255   ", | 
 | 	"RxFrames256To511   ", | 
 | 	"RxFrames512To1023  ", | 
 | 	"RxFrames1024To1518 ", | 
 | 	"RxFrames1519ToMax  ", | 
 |  | 
 | 	"PhyFIFOErrors      ", | 
 | 	"TSO                ", | 
 | 	"VLANextractions    ", | 
 | 	"VLANinsertions     ", | 
 | 	"TxCsumOffload      ", | 
 | 	"RxCsumGood         ", | 
 | 	"LroAggregated      ", | 
 | 	"LroFlushed         ", | 
 | 	"LroNoDesc          ", | 
 | 	"RxDrops            ", | 
 |  | 
 | 	"CheckTXEnToggled   ", | 
 | 	"CheckResets        ", | 
 |  | 
 | 	"LinkFaults         ", | 
 | }; | 
 |  | 
 | static int get_sset_count(struct net_device *dev, int sset) | 
 | { | 
 | 	switch (sset) { | 
 | 	case ETH_SS_STATS: | 
 | 		return ARRAY_SIZE(stats_strings); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | #define T3_REGMAP_SIZE (3 * 1024) | 
 |  | 
 | static int get_regs_len(struct net_device *dev) | 
 | { | 
 | 	return T3_REGMAP_SIZE; | 
 | } | 
 |  | 
 | static int get_eeprom_len(struct net_device *dev) | 
 | { | 
 | 	return EEPROMSIZE; | 
 | } | 
 |  | 
 | static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	u32 fw_vers = 0; | 
 | 	u32 tp_vers = 0; | 
 |  | 
 | 	spin_lock(&adapter->stats_lock); | 
 | 	t3_get_fw_version(adapter, &fw_vers); | 
 | 	t3_get_tp_version(adapter, &tp_vers); | 
 | 	spin_unlock(&adapter->stats_lock); | 
 |  | 
 | 	strcpy(info->driver, DRV_NAME); | 
 | 	strcpy(info->version, DRV_VERSION); | 
 | 	strcpy(info->bus_info, pci_name(adapter->pdev)); | 
 | 	if (!fw_vers) | 
 | 		strcpy(info->fw_version, "N/A"); | 
 | 	else { | 
 | 		snprintf(info->fw_version, sizeof(info->fw_version), | 
 | 			 "%s %u.%u.%u TP %u.%u.%u", | 
 | 			 G_FW_VERSION_TYPE(fw_vers) ? "T" : "N", | 
 | 			 G_FW_VERSION_MAJOR(fw_vers), | 
 | 			 G_FW_VERSION_MINOR(fw_vers), | 
 | 			 G_FW_VERSION_MICRO(fw_vers), | 
 | 			 G_TP_VERSION_MAJOR(tp_vers), | 
 | 			 G_TP_VERSION_MINOR(tp_vers), | 
 | 			 G_TP_VERSION_MICRO(tp_vers)); | 
 | 	} | 
 | } | 
 |  | 
 | static void get_strings(struct net_device *dev, u32 stringset, u8 * data) | 
 | { | 
 | 	if (stringset == ETH_SS_STATS) | 
 | 		memcpy(data, stats_strings, sizeof(stats_strings)); | 
 | } | 
 |  | 
 | static unsigned long collect_sge_port_stats(struct adapter *adapter, | 
 | 					    struct port_info *p, int idx) | 
 | { | 
 | 	int i; | 
 | 	unsigned long tot = 0; | 
 |  | 
 | 	for (i = p->first_qset; i < p->first_qset + p->nqsets; ++i) | 
 | 		tot += adapter->sge.qs[i].port_stats[idx]; | 
 | 	return tot; | 
 | } | 
 |  | 
 | static void get_stats(struct net_device *dev, struct ethtool_stats *stats, | 
 | 		      u64 *data) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	const struct mac_stats *s; | 
 |  | 
 | 	spin_lock(&adapter->stats_lock); | 
 | 	s = t3_mac_update_stats(&pi->mac); | 
 | 	spin_unlock(&adapter->stats_lock); | 
 |  | 
 | 	*data++ = s->tx_octets; | 
 | 	*data++ = s->tx_frames; | 
 | 	*data++ = s->tx_mcast_frames; | 
 | 	*data++ = s->tx_bcast_frames; | 
 | 	*data++ = s->tx_pause; | 
 | 	*data++ = s->tx_underrun; | 
 | 	*data++ = s->tx_fifo_urun; | 
 |  | 
 | 	*data++ = s->tx_frames_64; | 
 | 	*data++ = s->tx_frames_65_127; | 
 | 	*data++ = s->tx_frames_128_255; | 
 | 	*data++ = s->tx_frames_256_511; | 
 | 	*data++ = s->tx_frames_512_1023; | 
 | 	*data++ = s->tx_frames_1024_1518; | 
 | 	*data++ = s->tx_frames_1519_max; | 
 |  | 
 | 	*data++ = s->rx_octets; | 
 | 	*data++ = s->rx_frames; | 
 | 	*data++ = s->rx_mcast_frames; | 
 | 	*data++ = s->rx_bcast_frames; | 
 | 	*data++ = s->rx_pause; | 
 | 	*data++ = s->rx_fcs_errs; | 
 | 	*data++ = s->rx_symbol_errs; | 
 | 	*data++ = s->rx_short; | 
 | 	*data++ = s->rx_jabber; | 
 | 	*data++ = s->rx_too_long; | 
 | 	*data++ = s->rx_fifo_ovfl; | 
 |  | 
 | 	*data++ = s->rx_frames_64; | 
 | 	*data++ = s->rx_frames_65_127; | 
 | 	*data++ = s->rx_frames_128_255; | 
 | 	*data++ = s->rx_frames_256_511; | 
 | 	*data++ = s->rx_frames_512_1023; | 
 | 	*data++ = s->rx_frames_1024_1518; | 
 | 	*data++ = s->rx_frames_1519_max; | 
 |  | 
 | 	*data++ = pi->phy.fifo_errors; | 
 |  | 
 | 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TSO); | 
 | 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANEX); | 
 | 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS); | 
 | 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM); | 
 | 	*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD); | 
 | 	*data++ = 0; | 
 | 	*data++ = 0; | 
 | 	*data++ = 0; | 
 | 	*data++ = s->rx_cong_drops; | 
 |  | 
 | 	*data++ = s->num_toggled; | 
 | 	*data++ = s->num_resets; | 
 |  | 
 | 	*data++ = s->link_faults; | 
 | } | 
 |  | 
 | static inline void reg_block_dump(struct adapter *ap, void *buf, | 
 | 				  unsigned int start, unsigned int end) | 
 | { | 
 | 	u32 *p = buf + start; | 
 |  | 
 | 	for (; start <= end; start += sizeof(u32)) | 
 | 		*p++ = t3_read_reg(ap, start); | 
 | } | 
 |  | 
 | static void get_regs(struct net_device *dev, struct ethtool_regs *regs, | 
 | 		     void *buf) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *ap = pi->adapter; | 
 |  | 
 | 	/* | 
 | 	 * Version scheme: | 
 | 	 * bits 0..9: chip version | 
 | 	 * bits 10..15: chip revision | 
 | 	 * bit 31: set for PCIe cards | 
 | 	 */ | 
 | 	regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31); | 
 |  | 
 | 	/* | 
 | 	 * We skip the MAC statistics registers because they are clear-on-read. | 
 | 	 * Also reading multi-register stats would need to synchronize with the | 
 | 	 * periodic mac stats accumulation.  Hard to justify the complexity. | 
 | 	 */ | 
 | 	memset(buf, 0, T3_REGMAP_SIZE); | 
 | 	reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN); | 
 | 	reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT); | 
 | 	reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE); | 
 | 	reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA); | 
 | 	reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3); | 
 | 	reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0, | 
 | 		       XGM_REG(A_XGM_SERDES_STAT3, 1)); | 
 | 	reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1), | 
 | 		       XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1)); | 
 | } | 
 |  | 
 | static int restart_autoneg(struct net_device *dev) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 	if (!netif_running(dev)) | 
 | 		return -EAGAIN; | 
 | 	if (p->link_config.autoneg != AUTONEG_ENABLE) | 
 | 		return -EINVAL; | 
 | 	p->phy.ops->autoneg_restart(&p->phy); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxgb3_phys_id(struct net_device *dev, u32 data) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	int i; | 
 |  | 
 | 	if (data == 0) | 
 | 		data = 2; | 
 |  | 
 | 	for (i = 0; i < data * 2; i++) { | 
 | 		t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, | 
 | 				 (i & 1) ? F_GPIO0_OUT_VAL : 0); | 
 | 		if (msleep_interruptible(500)) | 
 | 			break; | 
 | 	} | 
 | 	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, | 
 | 			 F_GPIO0_OUT_VAL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 	cmd->supported = p->link_config.supported; | 
 | 	cmd->advertising = p->link_config.advertising; | 
 |  | 
 | 	if (netif_carrier_ok(dev)) { | 
 | 		cmd->speed = p->link_config.speed; | 
 | 		cmd->duplex = p->link_config.duplex; | 
 | 	} else { | 
 | 		cmd->speed = -1; | 
 | 		cmd->duplex = -1; | 
 | 	} | 
 |  | 
 | 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; | 
 | 	cmd->phy_address = p->phy.mdio.prtad; | 
 | 	cmd->transceiver = XCVR_EXTERNAL; | 
 | 	cmd->autoneg = p->link_config.autoneg; | 
 | 	cmd->maxtxpkt = 0; | 
 | 	cmd->maxrxpkt = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int speed_duplex_to_caps(int speed, int duplex) | 
 | { | 
 | 	int cap = 0; | 
 |  | 
 | 	switch (speed) { | 
 | 	case SPEED_10: | 
 | 		if (duplex == DUPLEX_FULL) | 
 | 			cap = SUPPORTED_10baseT_Full; | 
 | 		else | 
 | 			cap = SUPPORTED_10baseT_Half; | 
 | 		break; | 
 | 	case SPEED_100: | 
 | 		if (duplex == DUPLEX_FULL) | 
 | 			cap = SUPPORTED_100baseT_Full; | 
 | 		else | 
 | 			cap = SUPPORTED_100baseT_Half; | 
 | 		break; | 
 | 	case SPEED_1000: | 
 | 		if (duplex == DUPLEX_FULL) | 
 | 			cap = SUPPORTED_1000baseT_Full; | 
 | 		else | 
 | 			cap = SUPPORTED_1000baseT_Half; | 
 | 		break; | 
 | 	case SPEED_10000: | 
 | 		if (duplex == DUPLEX_FULL) | 
 | 			cap = SUPPORTED_10000baseT_Full; | 
 | 	} | 
 | 	return cap; | 
 | } | 
 |  | 
 | #define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ | 
 | 		      ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ | 
 | 		      ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ | 
 | 		      ADVERTISED_10000baseT_Full) | 
 |  | 
 | static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 | 	struct link_config *lc = &p->link_config; | 
 |  | 
 | 	if (!(lc->supported & SUPPORTED_Autoneg)) { | 
 | 		/* | 
 | 		 * PHY offers a single speed/duplex.  See if that's what's | 
 | 		 * being requested. | 
 | 		 */ | 
 | 		if (cmd->autoneg == AUTONEG_DISABLE) { | 
 | 			int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); | 
 | 			if (lc->supported & cap) | 
 | 				return 0; | 
 | 		} | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (cmd->autoneg == AUTONEG_DISABLE) { | 
 | 		int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); | 
 |  | 
 | 		if (!(lc->supported & cap) || cmd->speed == SPEED_1000) | 
 | 			return -EINVAL; | 
 | 		lc->requested_speed = cmd->speed; | 
 | 		lc->requested_duplex = cmd->duplex; | 
 | 		lc->advertising = 0; | 
 | 	} else { | 
 | 		cmd->advertising &= ADVERTISED_MASK; | 
 | 		cmd->advertising &= lc->supported; | 
 | 		if (!cmd->advertising) | 
 | 			return -EINVAL; | 
 | 		lc->requested_speed = SPEED_INVALID; | 
 | 		lc->requested_duplex = DUPLEX_INVALID; | 
 | 		lc->advertising = cmd->advertising | ADVERTISED_Autoneg; | 
 | 	} | 
 | 	lc->autoneg = cmd->autoneg; | 
 | 	if (netif_running(dev)) | 
 | 		t3_link_start(&p->phy, &p->mac, lc); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void get_pauseparam(struct net_device *dev, | 
 | 			   struct ethtool_pauseparam *epause) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 	epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; | 
 | 	epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; | 
 | 	epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; | 
 | } | 
 |  | 
 | static int set_pauseparam(struct net_device *dev, | 
 | 			  struct ethtool_pauseparam *epause) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 | 	struct link_config *lc = &p->link_config; | 
 |  | 
 | 	if (epause->autoneg == AUTONEG_DISABLE) | 
 | 		lc->requested_fc = 0; | 
 | 	else if (lc->supported & SUPPORTED_Autoneg) | 
 | 		lc->requested_fc = PAUSE_AUTONEG; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (epause->rx_pause) | 
 | 		lc->requested_fc |= PAUSE_RX; | 
 | 	if (epause->tx_pause) | 
 | 		lc->requested_fc |= PAUSE_TX; | 
 | 	if (lc->autoneg == AUTONEG_ENABLE) { | 
 | 		if (netif_running(dev)) | 
 | 			t3_link_start(&p->phy, &p->mac, lc); | 
 | 	} else { | 
 | 		lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); | 
 | 		if (netif_running(dev)) | 
 | 			t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 get_rx_csum(struct net_device *dev) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 	return p->rx_offload & T3_RX_CSUM; | 
 | } | 
 |  | 
 | static int set_rx_csum(struct net_device *dev, u32 data) | 
 | { | 
 | 	struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 	if (data) { | 
 | 		p->rx_offload |= T3_RX_CSUM; | 
 | 	} else { | 
 | 		int i; | 
 |  | 
 | 		p->rx_offload &= ~(T3_RX_CSUM | T3_LRO); | 
 | 		for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) | 
 | 			set_qset_lro(dev, i, 0); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	const struct qset_params *q = &adapter->params.sge.qset[pi->first_qset]; | 
 |  | 
 | 	e->rx_max_pending = MAX_RX_BUFFERS; | 
 | 	e->rx_mini_max_pending = 0; | 
 | 	e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; | 
 | 	e->tx_max_pending = MAX_TXQ_ENTRIES; | 
 |  | 
 | 	e->rx_pending = q->fl_size; | 
 | 	e->rx_mini_pending = q->rspq_size; | 
 | 	e->rx_jumbo_pending = q->jumbo_size; | 
 | 	e->tx_pending = q->txq_size[0]; | 
 | } | 
 |  | 
 | static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct qset_params *q; | 
 | 	int i; | 
 |  | 
 | 	if (e->rx_pending > MAX_RX_BUFFERS || | 
 | 	    e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || | 
 | 	    e->tx_pending > MAX_TXQ_ENTRIES || | 
 | 	    e->rx_mini_pending > MAX_RSPQ_ENTRIES || | 
 | 	    e->rx_mini_pending < MIN_RSPQ_ENTRIES || | 
 | 	    e->rx_pending < MIN_FL_ENTRIES || | 
 | 	    e->rx_jumbo_pending < MIN_FL_ENTRIES || | 
 | 	    e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (adapter->flags & FULL_INIT_DONE) | 
 | 		return -EBUSY; | 
 |  | 
 | 	q = &adapter->params.sge.qset[pi->first_qset]; | 
 | 	for (i = 0; i < pi->nqsets; ++i, ++q) { | 
 | 		q->rspq_size = e->rx_mini_pending; | 
 | 		q->fl_size = e->rx_pending; | 
 | 		q->jumbo_size = e->rx_jumbo_pending; | 
 | 		q->txq_size[0] = e->tx_pending; | 
 | 		q->txq_size[1] = e->tx_pending; | 
 | 		q->txq_size[2] = e->tx_pending; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct qset_params *qsp = &adapter->params.sge.qset[0]; | 
 | 	struct sge_qset *qs = &adapter->sge.qs[0]; | 
 |  | 
 | 	if (c->rx_coalesce_usecs * 10 > M_NEWTIMER) | 
 | 		return -EINVAL; | 
 |  | 
 | 	qsp->coalesce_usecs = c->rx_coalesce_usecs; | 
 | 	t3_update_qset_coalesce(qs, qsp); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct qset_params *q = adapter->params.sge.qset; | 
 |  | 
 | 	c->rx_coalesce_usecs = q->coalesce_usecs; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, | 
 | 		      u8 * data) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	int i, err = 0; | 
 |  | 
 | 	u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	e->magic = EEPROM_MAGIC; | 
 | 	for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) | 
 | 		err = t3_seeprom_read(adapter, i, (__le32 *) & buf[i]); | 
 |  | 
 | 	if (!err) | 
 | 		memcpy(data, buf + e->offset, e->len); | 
 | 	kfree(buf); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, | 
 | 		      u8 * data) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	u32 aligned_offset, aligned_len; | 
 | 	__le32 *p; | 
 | 	u8 *buf; | 
 | 	int err; | 
 |  | 
 | 	if (eeprom->magic != EEPROM_MAGIC) | 
 | 		return -EINVAL; | 
 |  | 
 | 	aligned_offset = eeprom->offset & ~3; | 
 | 	aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3; | 
 |  | 
 | 	if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) { | 
 | 		buf = kmalloc(aligned_len, GFP_KERNEL); | 
 | 		if (!buf) | 
 | 			return -ENOMEM; | 
 | 		err = t3_seeprom_read(adapter, aligned_offset, (__le32 *) buf); | 
 | 		if (!err && aligned_len > 4) | 
 | 			err = t3_seeprom_read(adapter, | 
 | 					      aligned_offset + aligned_len - 4, | 
 | 					      (__le32 *) & buf[aligned_len - 4]); | 
 | 		if (err) | 
 | 			goto out; | 
 | 		memcpy(buf + (eeprom->offset & 3), data, eeprom->len); | 
 | 	} else | 
 | 		buf = data; | 
 |  | 
 | 	err = t3_seeprom_wp(adapter, 0); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	for (p = (__le32 *) buf; !err && aligned_len; aligned_len -= 4, p++) { | 
 | 		err = t3_seeprom_write(adapter, aligned_offset, *p); | 
 | 		aligned_offset += 4; | 
 | 	} | 
 |  | 
 | 	if (!err) | 
 | 		err = t3_seeprom_wp(adapter, 1); | 
 | out: | 
 | 	if (buf != data) | 
 | 		kfree(buf); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | 
 | { | 
 | 	wol->supported = 0; | 
 | 	wol->wolopts = 0; | 
 | 	memset(&wol->sopass, 0, sizeof(wol->sopass)); | 
 | } | 
 |  | 
 | static const struct ethtool_ops cxgb_ethtool_ops = { | 
 | 	.get_settings = get_settings, | 
 | 	.set_settings = set_settings, | 
 | 	.get_drvinfo = get_drvinfo, | 
 | 	.get_msglevel = get_msglevel, | 
 | 	.set_msglevel = set_msglevel, | 
 | 	.get_ringparam = get_sge_param, | 
 | 	.set_ringparam = set_sge_param, | 
 | 	.get_coalesce = get_coalesce, | 
 | 	.set_coalesce = set_coalesce, | 
 | 	.get_eeprom_len = get_eeprom_len, | 
 | 	.get_eeprom = get_eeprom, | 
 | 	.set_eeprom = set_eeprom, | 
 | 	.get_pauseparam = get_pauseparam, | 
 | 	.set_pauseparam = set_pauseparam, | 
 | 	.get_rx_csum = get_rx_csum, | 
 | 	.set_rx_csum = set_rx_csum, | 
 | 	.set_tx_csum = ethtool_op_set_tx_csum, | 
 | 	.set_sg = ethtool_op_set_sg, | 
 | 	.get_link = ethtool_op_get_link, | 
 | 	.get_strings = get_strings, | 
 | 	.phys_id = cxgb3_phys_id, | 
 | 	.nway_reset = restart_autoneg, | 
 | 	.get_sset_count = get_sset_count, | 
 | 	.get_ethtool_stats = get_stats, | 
 | 	.get_regs_len = get_regs_len, | 
 | 	.get_regs = get_regs, | 
 | 	.get_wol = get_wol, | 
 | 	.set_tso = ethtool_op_set_tso, | 
 | }; | 
 |  | 
 | static int in_range(int val, int lo, int hi) | 
 | { | 
 | 	return val < 0 || (val <= hi && val >= lo); | 
 | } | 
 |  | 
 | static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	u32 cmd; | 
 | 	int ret; | 
 |  | 
 | 	if (copy_from_user(&cmd, useraddr, sizeof(cmd))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case CHELSIO_SET_QSET_PARAMS:{ | 
 | 		int i; | 
 | 		struct qset_params *q; | 
 | 		struct ch_qset_params t; | 
 | 		int q1 = pi->first_qset; | 
 | 		int nqsets = pi->nqsets; | 
 |  | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		if (copy_from_user(&t, useraddr, sizeof(t))) | 
 | 			return -EFAULT; | 
 | 		if (t.qset_idx >= SGE_QSETS) | 
 | 			return -EINVAL; | 
 | 		if (!in_range(t.intr_lat, 0, M_NEWTIMER) || | 
 | 		    !in_range(t.cong_thres, 0, 255) || | 
 | 		    !in_range(t.txq_size[0], MIN_TXQ_ENTRIES, | 
 | 			      MAX_TXQ_ENTRIES) || | 
 | 		    !in_range(t.txq_size[1], MIN_TXQ_ENTRIES, | 
 | 			      MAX_TXQ_ENTRIES) || | 
 | 		    !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES, | 
 | 			      MAX_CTRL_TXQ_ENTRIES) || | 
 | 		    !in_range(t.fl_size[0], MIN_FL_ENTRIES, | 
 | 			      MAX_RX_BUFFERS) || | 
 | 		    !in_range(t.fl_size[1], MIN_FL_ENTRIES, | 
 | 			      MAX_RX_JUMBO_BUFFERS) || | 
 | 		    !in_range(t.rspq_size, MIN_RSPQ_ENTRIES, | 
 | 			      MAX_RSPQ_ENTRIES)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		if ((adapter->flags & FULL_INIT_DONE) && t.lro > 0) | 
 | 			for_each_port(adapter, i) { | 
 | 				pi = adap2pinfo(adapter, i); | 
 | 				if (t.qset_idx >= pi->first_qset && | 
 | 				    t.qset_idx < pi->first_qset + pi->nqsets && | 
 | 				    !(pi->rx_offload & T3_RX_CSUM)) | 
 | 					return -EINVAL; | 
 | 			} | 
 |  | 
 | 		if ((adapter->flags & FULL_INIT_DONE) && | 
 | 			(t.rspq_size >= 0 || t.fl_size[0] >= 0 || | 
 | 			t.fl_size[1] >= 0 || t.txq_size[0] >= 0 || | 
 | 			t.txq_size[1] >= 0 || t.txq_size[2] >= 0 || | 
 | 			t.polling >= 0 || t.cong_thres >= 0)) | 
 | 			return -EBUSY; | 
 |  | 
 | 		/* Allow setting of any available qset when offload enabled */ | 
 | 		if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) { | 
 | 			q1 = 0; | 
 | 			for_each_port(adapter, i) { | 
 | 				pi = adap2pinfo(adapter, i); | 
 | 				nqsets += pi->first_qset + pi->nqsets; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (t.qset_idx < q1) | 
 | 			return -EINVAL; | 
 | 		if (t.qset_idx > q1 + nqsets - 1) | 
 | 			return -EINVAL; | 
 |  | 
 | 		q = &adapter->params.sge.qset[t.qset_idx]; | 
 |  | 
 | 		if (t.rspq_size >= 0) | 
 | 			q->rspq_size = t.rspq_size; | 
 | 		if (t.fl_size[0] >= 0) | 
 | 			q->fl_size = t.fl_size[0]; | 
 | 		if (t.fl_size[1] >= 0) | 
 | 			q->jumbo_size = t.fl_size[1]; | 
 | 		if (t.txq_size[0] >= 0) | 
 | 			q->txq_size[0] = t.txq_size[0]; | 
 | 		if (t.txq_size[1] >= 0) | 
 | 			q->txq_size[1] = t.txq_size[1]; | 
 | 		if (t.txq_size[2] >= 0) | 
 | 			q->txq_size[2] = t.txq_size[2]; | 
 | 		if (t.cong_thres >= 0) | 
 | 			q->cong_thres = t.cong_thres; | 
 | 		if (t.intr_lat >= 0) { | 
 | 			struct sge_qset *qs = | 
 | 				&adapter->sge.qs[t.qset_idx]; | 
 |  | 
 | 			q->coalesce_usecs = t.intr_lat; | 
 | 			t3_update_qset_coalesce(qs, q); | 
 | 		} | 
 | 		if (t.polling >= 0) { | 
 | 			if (adapter->flags & USING_MSIX) | 
 | 				q->polling = t.polling; | 
 | 			else { | 
 | 				/* No polling with INTx for T3A */ | 
 | 				if (adapter->params.rev == 0 && | 
 | 					!(adapter->flags & USING_MSI)) | 
 | 					t.polling = 0; | 
 |  | 
 | 				for (i = 0; i < SGE_QSETS; i++) { | 
 | 					q = &adapter->params.sge. | 
 | 						qset[i]; | 
 | 					q->polling = t.polling; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		if (t.lro >= 0) | 
 | 			set_qset_lro(dev, t.qset_idx, t.lro); | 
 |  | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_GET_QSET_PARAMS:{ | 
 | 		struct qset_params *q; | 
 | 		struct ch_qset_params t; | 
 | 		int q1 = pi->first_qset; | 
 | 		int nqsets = pi->nqsets; | 
 | 		int i; | 
 |  | 
 | 		if (copy_from_user(&t, useraddr, sizeof(t))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		/* Display qsets for all ports when offload enabled */ | 
 | 		if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) { | 
 | 			q1 = 0; | 
 | 			for_each_port(adapter, i) { | 
 | 				pi = adap2pinfo(adapter, i); | 
 | 				nqsets = pi->first_qset + pi->nqsets; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (t.qset_idx >= nqsets) | 
 | 			return -EINVAL; | 
 |  | 
 | 		q = &adapter->params.sge.qset[q1 + t.qset_idx]; | 
 | 		t.rspq_size = q->rspq_size; | 
 | 		t.txq_size[0] = q->txq_size[0]; | 
 | 		t.txq_size[1] = q->txq_size[1]; | 
 | 		t.txq_size[2] = q->txq_size[2]; | 
 | 		t.fl_size[0] = q->fl_size; | 
 | 		t.fl_size[1] = q->jumbo_size; | 
 | 		t.polling = q->polling; | 
 | 		t.lro = q->lro; | 
 | 		t.intr_lat = q->coalesce_usecs; | 
 | 		t.cong_thres = q->cong_thres; | 
 | 		t.qnum = q1; | 
 |  | 
 | 		if (adapter->flags & USING_MSIX) | 
 | 			t.vector = adapter->msix_info[q1 + t.qset_idx + 1].vec; | 
 | 		else | 
 | 			t.vector = adapter->pdev->irq; | 
 |  | 
 | 		if (copy_to_user(useraddr, &t, sizeof(t))) | 
 | 			return -EFAULT; | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_SET_QSET_NUM:{ | 
 | 		struct ch_reg edata; | 
 | 		unsigned int i, first_qset = 0, other_qsets = 0; | 
 |  | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		if (adapter->flags & FULL_INIT_DONE) | 
 | 			return -EBUSY; | 
 | 		if (copy_from_user(&edata, useraddr, sizeof(edata))) | 
 | 			return -EFAULT; | 
 | 		if (edata.val < 1 || | 
 | 			(edata.val > 1 && !(adapter->flags & USING_MSIX))) | 
 | 			return -EINVAL; | 
 |  | 
 | 		for_each_port(adapter, i) | 
 | 			if (adapter->port[i] && adapter->port[i] != dev) | 
 | 				other_qsets += adap2pinfo(adapter, i)->nqsets; | 
 |  | 
 | 		if (edata.val + other_qsets > SGE_QSETS) | 
 | 			return -EINVAL; | 
 |  | 
 | 		pi->nqsets = edata.val; | 
 |  | 
 | 		for_each_port(adapter, i) | 
 | 			if (adapter->port[i]) { | 
 | 				pi = adap2pinfo(adapter, i); | 
 | 				pi->first_qset = first_qset; | 
 | 				first_qset += pi->nqsets; | 
 | 			} | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_GET_QSET_NUM:{ | 
 | 		struct ch_reg edata; | 
 |  | 
 | 		edata.cmd = CHELSIO_GET_QSET_NUM; | 
 | 		edata.val = pi->nqsets; | 
 | 		if (copy_to_user(useraddr, &edata, sizeof(edata))) | 
 | 			return -EFAULT; | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_LOAD_FW:{ | 
 | 		u8 *fw_data; | 
 | 		struct ch_mem_range t; | 
 |  | 
 | 		if (!capable(CAP_SYS_RAWIO)) | 
 | 			return -EPERM; | 
 | 		if (copy_from_user(&t, useraddr, sizeof(t))) | 
 | 			return -EFAULT; | 
 | 		/* Check t.len sanity ? */ | 
 | 		fw_data = kmalloc(t.len, GFP_KERNEL); | 
 | 		if (!fw_data) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		if (copy_from_user | 
 | 			(fw_data, useraddr + sizeof(t), t.len)) { | 
 | 			kfree(fw_data); | 
 | 			return -EFAULT; | 
 | 		} | 
 |  | 
 | 		ret = t3_load_fw(adapter, fw_data, t.len); | 
 | 		kfree(fw_data); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_SETMTUTAB:{ | 
 | 		struct ch_mtus m; | 
 | 		int i; | 
 |  | 
 | 		if (!is_offload(adapter)) | 
 | 			return -EOPNOTSUPP; | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		if (offload_running(adapter)) | 
 | 			return -EBUSY; | 
 | 		if (copy_from_user(&m, useraddr, sizeof(m))) | 
 | 			return -EFAULT; | 
 | 		if (m.nmtus != NMTUS) | 
 | 			return -EINVAL; | 
 | 		if (m.mtus[0] < 81)	/* accommodate SACK */ | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* MTUs must be in ascending order */ | 
 | 		for (i = 1; i < NMTUS; ++i) | 
 | 			if (m.mtus[i] < m.mtus[i - 1]) | 
 | 				return -EINVAL; | 
 |  | 
 | 		memcpy(adapter->params.mtus, m.mtus, | 
 | 			sizeof(adapter->params.mtus)); | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_GET_PM:{ | 
 | 		struct tp_params *p = &adapter->params.tp; | 
 | 		struct ch_pm m = {.cmd = CHELSIO_GET_PM }; | 
 |  | 
 | 		if (!is_offload(adapter)) | 
 | 			return -EOPNOTSUPP; | 
 | 		m.tx_pg_sz = p->tx_pg_size; | 
 | 		m.tx_num_pg = p->tx_num_pgs; | 
 | 		m.rx_pg_sz = p->rx_pg_size; | 
 | 		m.rx_num_pg = p->rx_num_pgs; | 
 | 		m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan; | 
 | 		if (copy_to_user(useraddr, &m, sizeof(m))) | 
 | 			return -EFAULT; | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_SET_PM:{ | 
 | 		struct ch_pm m; | 
 | 		struct tp_params *p = &adapter->params.tp; | 
 |  | 
 | 		if (!is_offload(adapter)) | 
 | 			return -EOPNOTSUPP; | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		if (adapter->flags & FULL_INIT_DONE) | 
 | 			return -EBUSY; | 
 | 		if (copy_from_user(&m, useraddr, sizeof(m))) | 
 | 			return -EFAULT; | 
 | 		if (!is_power_of_2(m.rx_pg_sz) || | 
 | 			!is_power_of_2(m.tx_pg_sz)) | 
 | 			return -EINVAL;	/* not power of 2 */ | 
 | 		if (!(m.rx_pg_sz & 0x14000)) | 
 | 			return -EINVAL;	/* not 16KB or 64KB */ | 
 | 		if (!(m.tx_pg_sz & 0x1554000)) | 
 | 			return -EINVAL; | 
 | 		if (m.tx_num_pg == -1) | 
 | 			m.tx_num_pg = p->tx_num_pgs; | 
 | 		if (m.rx_num_pg == -1) | 
 | 			m.rx_num_pg = p->rx_num_pgs; | 
 | 		if (m.tx_num_pg % 24 || m.rx_num_pg % 24) | 
 | 			return -EINVAL; | 
 | 		if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size || | 
 | 			m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size) | 
 | 			return -EINVAL; | 
 | 		p->rx_pg_size = m.rx_pg_sz; | 
 | 		p->tx_pg_size = m.tx_pg_sz; | 
 | 		p->rx_num_pgs = m.rx_num_pg; | 
 | 		p->tx_num_pgs = m.tx_num_pg; | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_GET_MEM:{ | 
 | 		struct ch_mem_range t; | 
 | 		struct mc7 *mem; | 
 | 		u64 buf[32]; | 
 |  | 
 | 		if (!is_offload(adapter)) | 
 | 			return -EOPNOTSUPP; | 
 | 		if (!(adapter->flags & FULL_INIT_DONE)) | 
 | 			return -EIO;	/* need the memory controllers */ | 
 | 		if (copy_from_user(&t, useraddr, sizeof(t))) | 
 | 			return -EFAULT; | 
 | 		if ((t.addr & 7) || (t.len & 7)) | 
 | 			return -EINVAL; | 
 | 		if (t.mem_id == MEM_CM) | 
 | 			mem = &adapter->cm; | 
 | 		else if (t.mem_id == MEM_PMRX) | 
 | 			mem = &adapter->pmrx; | 
 | 		else if (t.mem_id == MEM_PMTX) | 
 | 			mem = &adapter->pmtx; | 
 | 		else | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* | 
 | 		 * Version scheme: | 
 | 		 * bits 0..9: chip version | 
 | 		 * bits 10..15: chip revision | 
 | 		 */ | 
 | 		t.version = 3 | (adapter->params.rev << 10); | 
 | 		if (copy_to_user(useraddr, &t, sizeof(t))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		/* | 
 | 		 * Read 256 bytes at a time as len can be large and we don't | 
 | 		 * want to use huge intermediate buffers. | 
 | 		 */ | 
 | 		useraddr += sizeof(t);	/* advance to start of buffer */ | 
 | 		while (t.len) { | 
 | 			unsigned int chunk = | 
 | 				min_t(unsigned int, t.len, sizeof(buf)); | 
 |  | 
 | 			ret = | 
 | 				t3_mc7_bd_read(mem, t.addr / 8, chunk / 8, | 
 | 						buf); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 			if (copy_to_user(useraddr, buf, chunk)) | 
 | 				return -EFAULT; | 
 | 			useraddr += chunk; | 
 | 			t.addr += chunk; | 
 | 			t.len -= chunk; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | 	case CHELSIO_SET_TRACE_FILTER:{ | 
 | 		struct ch_trace t; | 
 | 		const struct trace_params *tp; | 
 |  | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		if (!offload_running(adapter)) | 
 | 			return -EAGAIN; | 
 | 		if (copy_from_user(&t, useraddr, sizeof(t))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		tp = (const struct trace_params *)&t.sip; | 
 | 		if (t.config_tx) | 
 | 			t3_config_trace_filter(adapter, tp, 0, | 
 | 						t.invert_match, | 
 | 						t.trace_tx); | 
 | 		if (t.config_rx) | 
 | 			t3_config_trace_filter(adapter, tp, 1, | 
 | 						t.invert_match, | 
 | 						t.trace_rx); | 
 | 		break; | 
 | 	} | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd) | 
 | { | 
 | 	struct mii_ioctl_data *data = if_mii(req); | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case SIOCGMIIREG: | 
 | 	case SIOCSMIIREG: | 
 | 		/* Convert phy_id from older PRTAD/DEVAD format */ | 
 | 		if (is_10G(adapter) && | 
 | 		    !mdio_phy_id_is_c45(data->phy_id) && | 
 | 		    (data->phy_id & 0x1f00) && | 
 | 		    !(data->phy_id & 0xe0e0)) | 
 | 			data->phy_id = mdio_phy_id_c45(data->phy_id >> 8, | 
 | 						       data->phy_id & 0x1f); | 
 | 		/* FALLTHRU */ | 
 | 	case SIOCGMIIPHY: | 
 | 		return mdio_mii_ioctl(&pi->phy.mdio, data, cmd); | 
 | 	case SIOCCHIOCTL: | 
 | 		return cxgb_extension_ioctl(dev, req->ifr_data); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static int cxgb_change_mtu(struct net_device *dev, int new_mtu) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	int ret; | 
 |  | 
 | 	if (new_mtu < 81)	/* accommodate SACK */ | 
 | 		return -EINVAL; | 
 | 	if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu))) | 
 | 		return ret; | 
 | 	dev->mtu = new_mtu; | 
 | 	init_port_mtus(adapter); | 
 | 	if (adapter->params.rev == 0 && offload_running(adapter)) | 
 | 		t3_load_mtus(adapter, adapter->params.mtus, | 
 | 			     adapter->params.a_wnd, adapter->params.b_wnd, | 
 | 			     adapter->port[0]->mtu); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxgb_set_mac_addr(struct net_device *dev, void *p) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	struct sockaddr *addr = p; | 
 |  | 
 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
 | 	t3_mac_set_address(&pi->mac, LAN_MAC_IDX, dev->dev_addr); | 
 | 	if (offload_running(adapter)) | 
 | 		write_smt_entry(adapter, pi->port_id); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * t3_synchronize_rx - wait for current Rx processing on a port to complete | 
 |  * @adap: the adapter | 
 |  * @p: the port | 
 |  * | 
 |  * Ensures that current Rx processing on any of the queues associated with | 
 |  * the given port completes before returning.  We do this by acquiring and | 
 |  * releasing the locks of the response queues associated with the port. | 
 |  */ | 
 | static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { | 
 | 		struct sge_rspq *q = &adap->sge.qs[i].rspq; | 
 |  | 
 | 		spin_lock_irq(&q->lock); | 
 | 		spin_unlock_irq(&q->lock); | 
 | 	} | 
 | } | 
 |  | 
 | static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 |  | 
 | 	pi->vlan_grp = grp; | 
 | 	if (adapter->params.rev > 0) | 
 | 		t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL); | 
 | 	else { | 
 | 		/* single control for all ports */ | 
 | 		unsigned int i, have_vlans = 0; | 
 | 		for_each_port(adapter, i) | 
 | 		    have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL; | 
 |  | 
 | 		t3_set_vlan_accel(adapter, 1, have_vlans); | 
 | 	} | 
 | 	t3_synchronize_rx(adapter, pi); | 
 | } | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | static void cxgb_netpoll(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 | 	struct adapter *adapter = pi->adapter; | 
 | 	int qidx; | 
 |  | 
 | 	for (qidx = pi->first_qset; qidx < pi->first_qset + pi->nqsets; qidx++) { | 
 | 		struct sge_qset *qs = &adapter->sge.qs[qidx]; | 
 | 		void *source; | 
 |  | 
 | 		if (adapter->flags & USING_MSIX) | 
 | 			source = qs; | 
 | 		else | 
 | 			source = adapter; | 
 |  | 
 | 		t3_intr_handler(adapter, qs->rspq.polling) (0, source); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * Periodic accumulation of MAC statistics. | 
 |  */ | 
 | static void mac_stats_update(struct adapter *adapter) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *dev = adapter->port[i]; | 
 | 		struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 		if (netif_running(dev)) { | 
 | 			spin_lock(&adapter->stats_lock); | 
 | 			t3_mac_update_stats(&p->mac); | 
 | 			spin_unlock(&adapter->stats_lock); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void check_link_status(struct adapter *adapter) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *dev = adapter->port[i]; | 
 | 		struct port_info *p = netdev_priv(dev); | 
 | 		int link_fault; | 
 |  | 
 | 		spin_lock_irq(&adapter->work_lock); | 
 | 		link_fault = p->link_fault; | 
 | 		spin_unlock_irq(&adapter->work_lock); | 
 |  | 
 | 		if (link_fault) { | 
 | 			t3_link_fault(adapter, i); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) { | 
 | 			t3_xgm_intr_disable(adapter, i); | 
 | 			t3_read_reg(adapter, A_XGM_INT_STATUS + p->mac.offset); | 
 |  | 
 | 			t3_link_changed(adapter, i); | 
 | 			t3_xgm_intr_enable(adapter, i); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void check_t3b2_mac(struct adapter *adapter) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (!rtnl_trylock())	/* synchronize with ifdown */ | 
 | 		return; | 
 |  | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *dev = adapter->port[i]; | 
 | 		struct port_info *p = netdev_priv(dev); | 
 | 		int status; | 
 |  | 
 | 		if (!netif_running(dev)) | 
 | 			continue; | 
 |  | 
 | 		status = 0; | 
 | 		if (netif_running(dev) && netif_carrier_ok(dev)) | 
 | 			status = t3b2_mac_watchdog_task(&p->mac); | 
 | 		if (status == 1) | 
 | 			p->mac.stats.num_toggled++; | 
 | 		else if (status == 2) { | 
 | 			struct cmac *mac = &p->mac; | 
 |  | 
 | 			t3_mac_set_mtu(mac, dev->mtu); | 
 | 			t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr); | 
 | 			cxgb_set_rxmode(dev); | 
 | 			t3_link_start(&p->phy, mac, &p->link_config); | 
 | 			t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); | 
 | 			t3_port_intr_enable(adapter, p->port_id); | 
 | 			p->mac.stats.num_resets++; | 
 | 		} | 
 | 	} | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 |  | 
 | static void t3_adap_check_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       adap_check_task.work); | 
 | 	const struct adapter_params *p = &adapter->params; | 
 | 	int port; | 
 | 	unsigned int v, status, reset; | 
 |  | 
 | 	adapter->check_task_cnt++; | 
 |  | 
 | 	check_link_status(adapter); | 
 |  | 
 | 	/* Accumulate MAC stats if needed */ | 
 | 	if (!p->linkpoll_period || | 
 | 	    (adapter->check_task_cnt * p->linkpoll_period) / 10 >= | 
 | 	    p->stats_update_period) { | 
 | 		mac_stats_update(adapter); | 
 | 		adapter->check_task_cnt = 0; | 
 | 	} | 
 |  | 
 | 	if (p->rev == T3_REV_B2) | 
 | 		check_t3b2_mac(adapter); | 
 |  | 
 | 	/* | 
 | 	 * Scan the XGMAC's to check for various conditions which we want to | 
 | 	 * monitor in a periodic polling manner rather than via an interrupt | 
 | 	 * condition.  This is used for conditions which would otherwise flood | 
 | 	 * the system with interrupts and we only really need to know that the | 
 | 	 * conditions are "happening" ...  For each condition we count the | 
 | 	 * detection of the condition and reset it for the next polling loop. | 
 | 	 */ | 
 | 	for_each_port(adapter, port) { | 
 | 		struct cmac *mac =  &adap2pinfo(adapter, port)->mac; | 
 | 		u32 cause; | 
 |  | 
 | 		cause = t3_read_reg(adapter, A_XGM_INT_CAUSE + mac->offset); | 
 | 		reset = 0; | 
 | 		if (cause & F_RXFIFO_OVERFLOW) { | 
 | 			mac->stats.rx_fifo_ovfl++; | 
 | 			reset |= F_RXFIFO_OVERFLOW; | 
 | 		} | 
 |  | 
 | 		t3_write_reg(adapter, A_XGM_INT_CAUSE + mac->offset, reset); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We do the same as above for FL_EMPTY interrupts. | 
 | 	 */ | 
 | 	status = t3_read_reg(adapter, A_SG_INT_CAUSE); | 
 | 	reset = 0; | 
 |  | 
 | 	if (status & F_FLEMPTY) { | 
 | 		struct sge_qset *qs = &adapter->sge.qs[0]; | 
 | 		int i = 0; | 
 |  | 
 | 		reset |= F_FLEMPTY; | 
 |  | 
 | 		v = (t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS) >> S_FL0EMPTY) & | 
 | 		    0xffff; | 
 |  | 
 | 		while (v) { | 
 | 			qs->fl[i].empty += (v & 1); | 
 | 			if (i) | 
 | 				qs++; | 
 | 			i ^= 1; | 
 | 			v >>= 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	t3_write_reg(adapter, A_SG_INT_CAUSE, reset); | 
 |  | 
 | 	/* Schedule the next check update if any port is active. */ | 
 | 	spin_lock_irq(&adapter->work_lock); | 
 | 	if (adapter->open_device_map & PORT_MASK) | 
 | 		schedule_chk_task(adapter); | 
 | 	spin_unlock_irq(&adapter->work_lock); | 
 | } | 
 |  | 
 | static void db_full_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       db_full_task); | 
 |  | 
 | 	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_FULL, 0); | 
 | } | 
 |  | 
 | static void db_empty_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       db_empty_task); | 
 |  | 
 | 	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_EMPTY, 0); | 
 | } | 
 |  | 
 | static void db_drop_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       db_drop_task); | 
 | 	unsigned long delay = 1000; | 
 | 	unsigned short r; | 
 |  | 
 | 	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_DROP, 0); | 
 |  | 
 | 	/* | 
 | 	 * Sleep a while before ringing the driver qset dbs. | 
 | 	 * The delay is between 1000-2023 usecs. | 
 | 	 */ | 
 | 	get_random_bytes(&r, 2); | 
 | 	delay += r & 1023; | 
 | 	set_current_state(TASK_UNINTERRUPTIBLE); | 
 | 	schedule_timeout(usecs_to_jiffies(delay)); | 
 | 	ring_dbs(adapter); | 
 | } | 
 |  | 
 | /* | 
 |  * Processes external (PHY) interrupts in process context. | 
 |  */ | 
 | static void ext_intr_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       ext_intr_handler_task); | 
 | 	int i; | 
 |  | 
 | 	/* Disable link fault interrupts */ | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *dev = adapter->port[i]; | 
 | 		struct port_info *p = netdev_priv(dev); | 
 |  | 
 | 		t3_xgm_intr_disable(adapter, i); | 
 | 		t3_read_reg(adapter, A_XGM_INT_STATUS + p->mac.offset); | 
 | 	} | 
 |  | 
 | 	/* Re-enable link fault interrupts */ | 
 | 	t3_phy_intr_handler(adapter); | 
 |  | 
 | 	for_each_port(adapter, i) | 
 | 		t3_xgm_intr_enable(adapter, i); | 
 |  | 
 | 	/* Now reenable external interrupts */ | 
 | 	spin_lock_irq(&adapter->work_lock); | 
 | 	if (adapter->slow_intr_mask) { | 
 | 		adapter->slow_intr_mask |= F_T3DBG; | 
 | 		t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG); | 
 | 		t3_write_reg(adapter, A_PL_INT_ENABLE0, | 
 | 			     adapter->slow_intr_mask); | 
 | 	} | 
 | 	spin_unlock_irq(&adapter->work_lock); | 
 | } | 
 |  | 
 | /* | 
 |  * Interrupt-context handler for external (PHY) interrupts. | 
 |  */ | 
 | void t3_os_ext_intr_handler(struct adapter *adapter) | 
 | { | 
 | 	/* | 
 | 	 * Schedule a task to handle external interrupts as they may be slow | 
 | 	 * and we use a mutex to protect MDIO registers.  We disable PHY | 
 | 	 * interrupts in the meantime and let the task reenable them when | 
 | 	 * it's done. | 
 | 	 */ | 
 | 	spin_lock(&adapter->work_lock); | 
 | 	if (adapter->slow_intr_mask) { | 
 | 		adapter->slow_intr_mask &= ~F_T3DBG; | 
 | 		t3_write_reg(adapter, A_PL_INT_ENABLE0, | 
 | 			     adapter->slow_intr_mask); | 
 | 		queue_work(cxgb3_wq, &adapter->ext_intr_handler_task); | 
 | 	} | 
 | 	spin_unlock(&adapter->work_lock); | 
 | } | 
 |  | 
 | void t3_os_link_fault_handler(struct adapter *adapter, int port_id) | 
 | { | 
 | 	struct net_device *netdev = adapter->port[port_id]; | 
 | 	struct port_info *pi = netdev_priv(netdev); | 
 |  | 
 | 	spin_lock(&adapter->work_lock); | 
 | 	pi->link_fault = 1; | 
 | 	spin_unlock(&adapter->work_lock); | 
 | } | 
 |  | 
 | static int t3_adapter_error(struct adapter *adapter, int reset) | 
 | { | 
 | 	int i, ret = 0; | 
 |  | 
 | 	if (is_offload(adapter) && | 
 | 	    test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) { | 
 | 		cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0); | 
 | 		offload_close(&adapter->tdev); | 
 | 	} | 
 |  | 
 | 	/* Stop all ports */ | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *netdev = adapter->port[i]; | 
 |  | 
 | 		if (netif_running(netdev)) | 
 | 			cxgb_close(netdev); | 
 | 	} | 
 |  | 
 | 	/* Stop SGE timers */ | 
 | 	t3_stop_sge_timers(adapter); | 
 |  | 
 | 	adapter->flags &= ~FULL_INIT_DONE; | 
 |  | 
 | 	if (reset) | 
 | 		ret = t3_reset_adapter(adapter); | 
 |  | 
 | 	pci_disable_device(adapter->pdev); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int t3_reenable_adapter(struct adapter *adapter) | 
 | { | 
 | 	if (pci_enable_device(adapter->pdev)) { | 
 | 		dev_err(&adapter->pdev->dev, | 
 | 			"Cannot re-enable PCI device after reset.\n"); | 
 | 		goto err; | 
 | 	} | 
 | 	pci_set_master(adapter->pdev); | 
 | 	pci_restore_state(adapter->pdev); | 
 | 	pci_save_state(adapter->pdev); | 
 |  | 
 | 	/* Free sge resources */ | 
 | 	t3_free_sge_resources(adapter); | 
 |  | 
 | 	if (t3_replay_prep_adapter(adapter)) | 
 | 		goto err; | 
 |  | 
 | 	return 0; | 
 | err: | 
 | 	return -1; | 
 | } | 
 |  | 
 | static void t3_resume_ports(struct adapter *adapter) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* Restart the ports */ | 
 | 	for_each_port(adapter, i) { | 
 | 		struct net_device *netdev = adapter->port[i]; | 
 |  | 
 | 		if (netif_running(netdev)) { | 
 | 			if (cxgb_open(netdev)) { | 
 | 				dev_err(&adapter->pdev->dev, | 
 | 					"can't bring device back up" | 
 | 					" after reset\n"); | 
 | 				continue; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_offload(adapter) && !ofld_disable) | 
 | 		cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0); | 
 | } | 
 |  | 
 | /* | 
 |  * processes a fatal error. | 
 |  * Bring the ports down, reset the chip, bring the ports back up. | 
 |  */ | 
 | static void fatal_error_task(struct work_struct *work) | 
 | { | 
 | 	struct adapter *adapter = container_of(work, struct adapter, | 
 | 					       fatal_error_handler_task); | 
 | 	int err = 0; | 
 |  | 
 | 	rtnl_lock(); | 
 | 	err = t3_adapter_error(adapter, 1); | 
 | 	if (!err) | 
 | 		err = t3_reenable_adapter(adapter); | 
 | 	if (!err) | 
 | 		t3_resume_ports(adapter); | 
 |  | 
 | 	CH_ALERT(adapter, "adapter reset %s\n", err ? "failed" : "succeeded"); | 
 | 	rtnl_unlock(); | 
 | } | 
 |  | 
 | void t3_fatal_err(struct adapter *adapter) | 
 | { | 
 | 	unsigned int fw_status[4]; | 
 |  | 
 | 	if (adapter->flags & FULL_INIT_DONE) { | 
 | 		t3_sge_stop(adapter); | 
 | 		t3_write_reg(adapter, A_XGM_TX_CTRL, 0); | 
 | 		t3_write_reg(adapter, A_XGM_RX_CTRL, 0); | 
 | 		t3_write_reg(adapter, XGM_REG(A_XGM_TX_CTRL, 1), 0); | 
 | 		t3_write_reg(adapter, XGM_REG(A_XGM_RX_CTRL, 1), 0); | 
 |  | 
 | 		spin_lock(&adapter->work_lock); | 
 | 		t3_intr_disable(adapter); | 
 | 		queue_work(cxgb3_wq, &adapter->fatal_error_handler_task); | 
 | 		spin_unlock(&adapter->work_lock); | 
 | 	} | 
 | 	CH_ALERT(adapter, "encountered fatal error, operation suspended\n"); | 
 | 	if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status)) | 
 | 		CH_ALERT(adapter, "FW status: 0x%x, 0x%x, 0x%x, 0x%x\n", | 
 | 			 fw_status[0], fw_status[1], | 
 | 			 fw_status[2], fw_status[3]); | 
 | } | 
 |  | 
 | /** | 
 |  * t3_io_error_detected - called when PCI error is detected | 
 |  * @pdev: Pointer to PCI device | 
 |  * @state: The current pci connection state | 
 |  * | 
 |  * This function is called after a PCI bus error affecting | 
 |  * this device has been detected. | 
 |  */ | 
 | static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev, | 
 | 					     pci_channel_state_t state) | 
 | { | 
 | 	struct adapter *adapter = pci_get_drvdata(pdev); | 
 | 	int ret; | 
 |  | 
 | 	if (state == pci_channel_io_perm_failure) | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 |  | 
 | 	ret = t3_adapter_error(adapter, 0); | 
 |  | 
 | 	/* Request a slot reset. */ | 
 | 	return PCI_ERS_RESULT_NEED_RESET; | 
 | } | 
 |  | 
 | /** | 
 |  * t3_io_slot_reset - called after the pci bus has been reset. | 
 |  * @pdev: Pointer to PCI device | 
 |  * | 
 |  * Restart the card from scratch, as if from a cold-boot. | 
 |  */ | 
 | static pci_ers_result_t t3_io_slot_reset(struct pci_dev *pdev) | 
 | { | 
 | 	struct adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (!t3_reenable_adapter(adapter)) | 
 | 		return PCI_ERS_RESULT_RECOVERED; | 
 |  | 
 | 	return PCI_ERS_RESULT_DISCONNECT; | 
 | } | 
 |  | 
 | /** | 
 |  * t3_io_resume - called when traffic can start flowing again. | 
 |  * @pdev: Pointer to PCI device | 
 |  * | 
 |  * This callback is called when the error recovery driver tells us that | 
 |  * its OK to resume normal operation. | 
 |  */ | 
 | static void t3_io_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	CH_ALERT(adapter, "adapter recovering, PEX ERR 0x%x\n", | 
 | 		 t3_read_reg(adapter, A_PCIE_PEX_ERR)); | 
 |  | 
 | 	t3_resume_ports(adapter); | 
 | } | 
 |  | 
 | static struct pci_error_handlers t3_err_handler = { | 
 | 	.error_detected = t3_io_error_detected, | 
 | 	.slot_reset = t3_io_slot_reset, | 
 | 	.resume = t3_io_resume, | 
 | }; | 
 |  | 
 | /* | 
 |  * Set the number of qsets based on the number of CPUs and the number of ports, | 
 |  * not to exceed the number of available qsets, assuming there are enough qsets | 
 |  * per port in HW. | 
 |  */ | 
 | static void set_nqsets(struct adapter *adap) | 
 | { | 
 | 	int i, j = 0; | 
 | 	int num_cpus = num_online_cpus(); | 
 | 	int hwports = adap->params.nports; | 
 | 	int nqsets = adap->msix_nvectors - 1; | 
 |  | 
 | 	if (adap->params.rev > 0 && adap->flags & USING_MSIX) { | 
 | 		if (hwports == 2 && | 
 | 		    (hwports * nqsets > SGE_QSETS || | 
 | 		     num_cpus >= nqsets / hwports)) | 
 | 			nqsets /= hwports; | 
 | 		if (nqsets > num_cpus) | 
 | 			nqsets = num_cpus; | 
 | 		if (nqsets < 1 || hwports == 4) | 
 | 			nqsets = 1; | 
 | 	} else | 
 | 		nqsets = 1; | 
 |  | 
 | 	for_each_port(adap, i) { | 
 | 		struct port_info *pi = adap2pinfo(adap, i); | 
 |  | 
 | 		pi->first_qset = j; | 
 | 		pi->nqsets = nqsets; | 
 | 		j = pi->first_qset + nqsets; | 
 |  | 
 | 		dev_info(&adap->pdev->dev, | 
 | 			 "Port %d using %d queue sets.\n", i, nqsets); | 
 | 	} | 
 | } | 
 |  | 
 | static int __devinit cxgb_enable_msix(struct adapter *adap) | 
 | { | 
 | 	struct msix_entry entries[SGE_QSETS + 1]; | 
 | 	int vectors; | 
 | 	int i, err; | 
 |  | 
 | 	vectors = ARRAY_SIZE(entries); | 
 | 	for (i = 0; i < vectors; ++i) | 
 | 		entries[i].entry = i; | 
 |  | 
 | 	while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0) | 
 | 		vectors = err; | 
 |  | 
 | 	if (err < 0) | 
 | 		pci_disable_msix(adap->pdev); | 
 |  | 
 | 	if (!err && vectors < (adap->params.nports + 1)) { | 
 | 		pci_disable_msix(adap->pdev); | 
 | 		err = -1; | 
 | 	} | 
 |  | 
 | 	if (!err) { | 
 | 		for (i = 0; i < vectors; ++i) | 
 | 			adap->msix_info[i].vec = entries[i].vector; | 
 | 		adap->msix_nvectors = vectors; | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static void __devinit print_port_info(struct adapter *adap, | 
 | 				      const struct adapter_info *ai) | 
 | { | 
 | 	static const char *pci_variant[] = { | 
 | 		"PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express" | 
 | 	}; | 
 |  | 
 | 	int i; | 
 | 	char buf[80]; | 
 |  | 
 | 	if (is_pcie(adap)) | 
 | 		snprintf(buf, sizeof(buf), "%s x%d", | 
 | 			 pci_variant[adap->params.pci.variant], | 
 | 			 adap->params.pci.width); | 
 | 	else | 
 | 		snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit", | 
 | 			 pci_variant[adap->params.pci.variant], | 
 | 			 adap->params.pci.speed, adap->params.pci.width); | 
 |  | 
 | 	for_each_port(adap, i) { | 
 | 		struct net_device *dev = adap->port[i]; | 
 | 		const struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 		if (!test_bit(i, &adap->registered_device_map)) | 
 | 			continue; | 
 | 		printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n", | 
 | 		       dev->name, ai->desc, pi->phy.desc, | 
 | 		       is_offload(adap) ? "R" : "", adap->params.rev, buf, | 
 | 		       (adap->flags & USING_MSIX) ? " MSI-X" : | 
 | 		       (adap->flags & USING_MSI) ? " MSI" : ""); | 
 | 		if (adap->name == dev->name && adap->params.vpd.mclk) | 
 | 			printk(KERN_INFO | 
 | 			       "%s: %uMB CM, %uMB PMTX, %uMB PMRX, S/N: %s\n", | 
 | 			       adap->name, t3_mc7_size(&adap->cm) >> 20, | 
 | 			       t3_mc7_size(&adap->pmtx) >> 20, | 
 | 			       t3_mc7_size(&adap->pmrx) >> 20, | 
 | 			       adap->params.vpd.sn); | 
 | 	} | 
 | } | 
 |  | 
 | static const struct net_device_ops cxgb_netdev_ops = { | 
 | 	.ndo_open		= cxgb_open, | 
 | 	.ndo_stop		= cxgb_close, | 
 | 	.ndo_start_xmit		= t3_eth_xmit, | 
 | 	.ndo_get_stats		= cxgb_get_stats, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | 	.ndo_set_multicast_list	= cxgb_set_rxmode, | 
 | 	.ndo_do_ioctl		= cxgb_ioctl, | 
 | 	.ndo_change_mtu		= cxgb_change_mtu, | 
 | 	.ndo_set_mac_address	= cxgb_set_mac_addr, | 
 | 	.ndo_vlan_rx_register	= vlan_rx_register, | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	.ndo_poll_controller	= cxgb_netpoll, | 
 | #endif | 
 | }; | 
 |  | 
 | static void __devinit cxgb3_init_iscsi_mac(struct net_device *dev) | 
 | { | 
 | 	struct port_info *pi = netdev_priv(dev); | 
 |  | 
 | 	memcpy(pi->iscsic.mac_addr, dev->dev_addr, ETH_ALEN); | 
 | 	pi->iscsic.mac_addr[3] |= 0x80; | 
 | } | 
 |  | 
 | static int __devinit init_one(struct pci_dev *pdev, | 
 | 			      const struct pci_device_id *ent) | 
 | { | 
 | 	static int version_printed; | 
 |  | 
 | 	int i, err, pci_using_dac = 0; | 
 | 	resource_size_t mmio_start, mmio_len; | 
 | 	const struct adapter_info *ai; | 
 | 	struct adapter *adapter = NULL; | 
 | 	struct port_info *pi; | 
 |  | 
 | 	if (!version_printed) { | 
 | 		printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); | 
 | 		++version_printed; | 
 | 	} | 
 |  | 
 | 	if (!cxgb3_wq) { | 
 | 		cxgb3_wq = create_singlethread_workqueue(DRV_NAME); | 
 | 		if (!cxgb3_wq) { | 
 | 			printk(KERN_ERR DRV_NAME | 
 | 			       ": cannot initialize work queue\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	err = pci_request_regions(pdev, DRV_NAME); | 
 | 	if (err) { | 
 | 		/* Just info, some other driver may have claimed the device. */ | 
 | 		dev_info(&pdev->dev, "cannot obtain PCI resources\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	err = pci_enable_device(pdev); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "cannot enable PCI device\n"); | 
 | 		goto out_release_regions; | 
 | 	} | 
 |  | 
 | 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { | 
 | 		pci_using_dac = 1; | 
 | 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | 
 | 		if (err) { | 
 | 			dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " | 
 | 			       "coherent allocations\n"); | 
 | 			goto out_disable_device; | 
 | 		} | 
 | 	} else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) { | 
 | 		dev_err(&pdev->dev, "no usable DMA configuration\n"); | 
 | 		goto out_disable_device; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 | 	pci_save_state(pdev); | 
 |  | 
 | 	mmio_start = pci_resource_start(pdev, 0); | 
 | 	mmio_len = pci_resource_len(pdev, 0); | 
 | 	ai = t3_get_adapter_info(ent->driver_data); | 
 |  | 
 | 	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); | 
 | 	if (!adapter) { | 
 | 		err = -ENOMEM; | 
 | 		goto out_disable_device; | 
 | 	} | 
 |  | 
 | 	adapter->nofail_skb = | 
 | 		alloc_skb(sizeof(struct cpl_set_tcb_field), GFP_KERNEL); | 
 | 	if (!adapter->nofail_skb) { | 
 | 		dev_err(&pdev->dev, "cannot allocate nofail buffer\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto out_free_adapter; | 
 | 	} | 
 |  | 
 | 	adapter->regs = ioremap_nocache(mmio_start, mmio_len); | 
 | 	if (!adapter->regs) { | 
 | 		dev_err(&pdev->dev, "cannot map device registers\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto out_free_adapter; | 
 | 	} | 
 |  | 
 | 	adapter->pdev = pdev; | 
 | 	adapter->name = pci_name(pdev); | 
 | 	adapter->msg_enable = dflt_msg_enable; | 
 | 	adapter->mmio_len = mmio_len; | 
 |  | 
 | 	mutex_init(&adapter->mdio_lock); | 
 | 	spin_lock_init(&adapter->work_lock); | 
 | 	spin_lock_init(&adapter->stats_lock); | 
 |  | 
 | 	INIT_LIST_HEAD(&adapter->adapter_list); | 
 | 	INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); | 
 | 	INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task); | 
 |  | 
 | 	INIT_WORK(&adapter->db_full_task, db_full_task); | 
 | 	INIT_WORK(&adapter->db_empty_task, db_empty_task); | 
 | 	INIT_WORK(&adapter->db_drop_task, db_drop_task); | 
 |  | 
 | 	INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); | 
 |  | 
 | 	for (i = 0; i < ai->nports0 + ai->nports1; ++i) { | 
 | 		struct net_device *netdev; | 
 |  | 
 | 		netdev = alloc_etherdev_mq(sizeof(struct port_info), SGE_QSETS); | 
 | 		if (!netdev) { | 
 | 			err = -ENOMEM; | 
 | 			goto out_free_dev; | 
 | 		} | 
 |  | 
 | 		SET_NETDEV_DEV(netdev, &pdev->dev); | 
 |  | 
 | 		adapter->port[i] = netdev; | 
 | 		pi = netdev_priv(netdev); | 
 | 		pi->adapter = adapter; | 
 | 		pi->rx_offload = T3_RX_CSUM | T3_LRO; | 
 | 		pi->port_id = i; | 
 | 		netif_carrier_off(netdev); | 
 | 		netif_tx_stop_all_queues(netdev); | 
 | 		netdev->irq = pdev->irq; | 
 | 		netdev->mem_start = mmio_start; | 
 | 		netdev->mem_end = mmio_start + mmio_len - 1; | 
 | 		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO; | 
 | 		netdev->features |= NETIF_F_GRO; | 
 | 		if (pci_using_dac) | 
 | 			netdev->features |= NETIF_F_HIGHDMA; | 
 |  | 
 | 		netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; | 
 | 		netdev->netdev_ops = &cxgb_netdev_ops; | 
 | 		SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops); | 
 | 	} | 
 |  | 
 | 	pci_set_drvdata(pdev, adapter); | 
 | 	if (t3_prep_adapter(adapter, ai, 1) < 0) { | 
 | 		err = -ENODEV; | 
 | 		goto out_free_dev; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * The card is now ready to go.  If any errors occur during device | 
 | 	 * registration we do not fail the whole card but rather proceed only | 
 | 	 * with the ports we manage to register successfully.  However we must | 
 | 	 * register at least one net device. | 
 | 	 */ | 
 | 	for_each_port(adapter, i) { | 
 | 		err = register_netdev(adapter->port[i]); | 
 | 		if (err) | 
 | 			dev_warn(&pdev->dev, | 
 | 				 "cannot register net device %s, skipping\n", | 
 | 				 adapter->port[i]->name); | 
 | 		else { | 
 | 			/* | 
 | 			 * Change the name we use for messages to the name of | 
 | 			 * the first successfully registered interface. | 
 | 			 */ | 
 | 			if (!adapter->registered_device_map) | 
 | 				adapter->name = adapter->port[i]->name; | 
 |  | 
 | 			__set_bit(i, &adapter->registered_device_map); | 
 | 		} | 
 | 	} | 
 | 	if (!adapter->registered_device_map) { | 
 | 		dev_err(&pdev->dev, "could not register any net devices\n"); | 
 | 		goto out_free_dev; | 
 | 	} | 
 |  | 
 | 	for_each_port(adapter, i) | 
 | 		cxgb3_init_iscsi_mac(adapter->port[i]); | 
 |  | 
 | 	/* Driver's ready. Reflect it on LEDs */ | 
 | 	t3_led_ready(adapter); | 
 |  | 
 | 	if (is_offload(adapter)) { | 
 | 		__set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map); | 
 | 		cxgb3_adapter_ofld(adapter); | 
 | 	} | 
 |  | 
 | 	/* See what interrupts we'll be using */ | 
 | 	if (msi > 1 && cxgb_enable_msix(adapter) == 0) | 
 | 		adapter->flags |= USING_MSIX; | 
 | 	else if (msi > 0 && pci_enable_msi(pdev) == 0) | 
 | 		adapter->flags |= USING_MSI; | 
 |  | 
 | 	set_nqsets(adapter); | 
 |  | 
 | 	err = sysfs_create_group(&adapter->port[0]->dev.kobj, | 
 | 				 &cxgb3_attr_group); | 
 |  | 
 | 	print_port_info(adapter, ai); | 
 | 	return 0; | 
 |  | 
 | out_free_dev: | 
 | 	iounmap(adapter->regs); | 
 | 	for (i = ai->nports0 + ai->nports1 - 1; i >= 0; --i) | 
 | 		if (adapter->port[i]) | 
 | 			free_netdev(adapter->port[i]); | 
 |  | 
 | out_free_adapter: | 
 | 	kfree(adapter); | 
 |  | 
 | out_disable_device: | 
 | 	pci_disable_device(pdev); | 
 | out_release_regions: | 
 | 	pci_release_regions(pdev); | 
 | 	pci_set_drvdata(pdev, NULL); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void __devexit remove_one(struct pci_dev *pdev) | 
 | { | 
 | 	struct adapter *adapter = pci_get_drvdata(pdev); | 
 |  | 
 | 	if (adapter) { | 
 | 		int i; | 
 |  | 
 | 		t3_sge_stop(adapter); | 
 | 		sysfs_remove_group(&adapter->port[0]->dev.kobj, | 
 | 				   &cxgb3_attr_group); | 
 |  | 
 | 		if (is_offload(adapter)) { | 
 | 			cxgb3_adapter_unofld(adapter); | 
 | 			if (test_bit(OFFLOAD_DEVMAP_BIT, | 
 | 				     &adapter->open_device_map)) | 
 | 				offload_close(&adapter->tdev); | 
 | 		} | 
 |  | 
 | 		for_each_port(adapter, i) | 
 | 		    if (test_bit(i, &adapter->registered_device_map)) | 
 | 			unregister_netdev(adapter->port[i]); | 
 |  | 
 | 		t3_stop_sge_timers(adapter); | 
 | 		t3_free_sge_resources(adapter); | 
 | 		cxgb_disable_msi(adapter); | 
 |  | 
 | 		for_each_port(adapter, i) | 
 | 			if (adapter->port[i]) | 
 | 				free_netdev(adapter->port[i]); | 
 |  | 
 | 		iounmap(adapter->regs); | 
 | 		if (adapter->nofail_skb) | 
 | 			kfree_skb(adapter->nofail_skb); | 
 | 		kfree(adapter); | 
 | 		pci_release_regions(pdev); | 
 | 		pci_disable_device(pdev); | 
 | 		pci_set_drvdata(pdev, NULL); | 
 | 	} | 
 | } | 
 |  | 
 | static struct pci_driver driver = { | 
 | 	.name = DRV_NAME, | 
 | 	.id_table = cxgb3_pci_tbl, | 
 | 	.probe = init_one, | 
 | 	.remove = __devexit_p(remove_one), | 
 | 	.err_handler = &t3_err_handler, | 
 | }; | 
 |  | 
 | static int __init cxgb3_init_module(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	cxgb3_offload_init(); | 
 |  | 
 | 	ret = pci_register_driver(&driver); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit cxgb3_cleanup_module(void) | 
 | { | 
 | 	pci_unregister_driver(&driver); | 
 | 	if (cxgb3_wq) | 
 | 		destroy_workqueue(cxgb3_wq); | 
 | } | 
 |  | 
 | module_init(cxgb3_init_module); | 
 | module_exit(cxgb3_cleanup_module); |