| // SPDX-License-Identifier: GPL-2.0 OR MIT | 
 | /************************************************************************** | 
 |  * | 
 |  * Copyright 2009-2015 VMware, Inc., Palo Alto, CA., USA | 
 |  * | 
 |  * Permission is hereby granted, free of charge, to any person obtaining a | 
 |  * copy of this software and associated documentation files (the | 
 |  * "Software"), to deal in the Software without restriction, including | 
 |  * without limitation the rights to use, copy, modify, merge, publish, | 
 |  * distribute, sub license, and/or sell copies of the Software, and to | 
 |  * permit persons to whom the Software is furnished to do so, subject to | 
 |  * the following conditions: | 
 |  * | 
 |  * The above copyright notice and this permission notice (including the | 
 |  * next paragraph) shall be included in all copies or substantial portions | 
 |  * of the Software. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
 |  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
 |  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL | 
 |  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, | 
 |  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR | 
 |  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE | 
 |  * USE OR OTHER DEALINGS IN THE SOFTWARE. | 
 |  * | 
 |  **************************************************************************/ | 
 |  | 
 | #include <drm/drm_atomic.h> | 
 | #include <drm/drm_atomic_helper.h> | 
 | #include <drm/drm_damage_helper.h> | 
 | #include <drm/drm_fourcc.h> | 
 | #include <drm/drm_plane_helper.h> | 
 | #include <drm/drm_rect.h> | 
 | #include <drm/drm_sysfs.h> | 
 | #include <drm/drm_vblank.h> | 
 |  | 
 | #include "vmwgfx_kms.h" | 
 |  | 
 | /* Might need a hrtimer here? */ | 
 | #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1) | 
 |  | 
 | void vmw_du_cleanup(struct vmw_display_unit *du) | 
 | { | 
 | 	drm_plane_cleanup(&du->primary); | 
 | 	drm_plane_cleanup(&du->cursor); | 
 |  | 
 | 	drm_connector_unregister(&du->connector); | 
 | 	drm_crtc_cleanup(&du->crtc); | 
 | 	drm_encoder_cleanup(&du->encoder); | 
 | 	drm_connector_cleanup(&du->connector); | 
 | } | 
 |  | 
 | /* | 
 |  * Display Unit Cursor functions | 
 |  */ | 
 |  | 
 | static int vmw_cursor_update_image(struct vmw_private *dev_priv, | 
 | 				   u32 *image, u32 width, u32 height, | 
 | 				   u32 hotspotX, u32 hotspotY) | 
 | { | 
 | 	struct { | 
 | 		u32 cmd; | 
 | 		SVGAFifoCmdDefineAlphaCursor cursor; | 
 | 	} *cmd; | 
 | 	u32 image_size = width * height * 4; | 
 | 	u32 cmd_size = sizeof(*cmd) + image_size; | 
 |  | 
 | 	if (!image) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cmd = VMW_FIFO_RESERVE(dev_priv, cmd_size); | 
 | 	if (unlikely(cmd == NULL)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	memset(cmd, 0, sizeof(*cmd)); | 
 |  | 
 | 	memcpy(&cmd[1], image, image_size); | 
 |  | 
 | 	cmd->cmd = SVGA_CMD_DEFINE_ALPHA_CURSOR; | 
 | 	cmd->cursor.id = 0; | 
 | 	cmd->cursor.width = width; | 
 | 	cmd->cursor.height = height; | 
 | 	cmd->cursor.hotspotX = hotspotX; | 
 | 	cmd->cursor.hotspotY = hotspotY; | 
 |  | 
 | 	vmw_fifo_commit_flush(dev_priv, cmd_size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int vmw_cursor_update_bo(struct vmw_private *dev_priv, | 
 | 				struct vmw_buffer_object *bo, | 
 | 				u32 width, u32 height, | 
 | 				u32 hotspotX, u32 hotspotY) | 
 | { | 
 | 	struct ttm_bo_kmap_obj map; | 
 | 	unsigned long kmap_offset; | 
 | 	unsigned long kmap_num; | 
 | 	void *virtual; | 
 | 	bool dummy; | 
 | 	int ret; | 
 |  | 
 | 	kmap_offset = 0; | 
 | 	kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT; | 
 |  | 
 | 	ret = ttm_bo_reserve(&bo->base, true, false, NULL); | 
 | 	if (unlikely(ret != 0)) { | 
 | 		DRM_ERROR("reserve failed\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = ttm_bo_kmap(&bo->base, kmap_offset, kmap_num, &map); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto err_unreserve; | 
 |  | 
 | 	virtual = ttm_kmap_obj_virtual(&map, &dummy); | 
 | 	ret = vmw_cursor_update_image(dev_priv, virtual, width, height, | 
 | 				      hotspotX, hotspotY); | 
 |  | 
 | 	ttm_bo_kunmap(&map); | 
 | err_unreserve: | 
 | 	ttm_bo_unreserve(&bo->base); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static void vmw_cursor_update_position(struct vmw_private *dev_priv, | 
 | 				       bool show, int x, int y) | 
 | { | 
 | 	u32 *fifo_mem = dev_priv->mmio_virt; | 
 | 	uint32_t count; | 
 |  | 
 | 	spin_lock(&dev_priv->cursor_lock); | 
 | 	vmw_mmio_write(show ? 1 : 0, fifo_mem + SVGA_FIFO_CURSOR_ON); | 
 | 	vmw_mmio_write(x, fifo_mem + SVGA_FIFO_CURSOR_X); | 
 | 	vmw_mmio_write(y, fifo_mem + SVGA_FIFO_CURSOR_Y); | 
 | 	count = vmw_mmio_read(fifo_mem + SVGA_FIFO_CURSOR_COUNT); | 
 | 	vmw_mmio_write(++count, fifo_mem + SVGA_FIFO_CURSOR_COUNT); | 
 | 	spin_unlock(&dev_priv->cursor_lock); | 
 | } | 
 |  | 
 |  | 
 | void vmw_kms_cursor_snoop(struct vmw_surface *srf, | 
 | 			  struct ttm_object_file *tfile, | 
 | 			  struct ttm_buffer_object *bo, | 
 | 			  SVGA3dCmdHeader *header) | 
 | { | 
 | 	struct ttm_bo_kmap_obj map; | 
 | 	unsigned long kmap_offset; | 
 | 	unsigned long kmap_num; | 
 | 	SVGA3dCopyBox *box; | 
 | 	unsigned box_count; | 
 | 	void *virtual; | 
 | 	bool dummy; | 
 | 	struct vmw_dma_cmd { | 
 | 		SVGA3dCmdHeader header; | 
 | 		SVGA3dCmdSurfaceDMA dma; | 
 | 	} *cmd; | 
 | 	int i, ret; | 
 |  | 
 | 	cmd = container_of(header, struct vmw_dma_cmd, header); | 
 |  | 
 | 	/* No snooper installed */ | 
 | 	if (!srf->snooper.image) | 
 | 		return; | 
 |  | 
 | 	if (cmd->dma.host.face != 0 || cmd->dma.host.mipmap != 0) { | 
 | 		DRM_ERROR("face and mipmap for cursors should never != 0\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (cmd->header.size < 64) { | 
 | 		DRM_ERROR("at least one full copy box must be given\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	box = (SVGA3dCopyBox *)&cmd[1]; | 
 | 	box_count = (cmd->header.size - sizeof(SVGA3dCmdSurfaceDMA)) / | 
 | 			sizeof(SVGA3dCopyBox); | 
 |  | 
 | 	if (cmd->dma.guest.ptr.offset % PAGE_SIZE || | 
 | 	    box->x != 0    || box->y != 0    || box->z != 0    || | 
 | 	    box->srcx != 0 || box->srcy != 0 || box->srcz != 0 || | 
 | 	    box->d != 1    || box_count != 1) { | 
 | 		/* TODO handle none page aligned offsets */ | 
 | 		/* TODO handle more dst & src != 0 */ | 
 | 		/* TODO handle more then one copy */ | 
 | 		DRM_ERROR("Cant snoop dma request for cursor!\n"); | 
 | 		DRM_ERROR("(%u, %u, %u) (%u, %u, %u) (%ux%ux%u) %u %u\n", | 
 | 			  box->srcx, box->srcy, box->srcz, | 
 | 			  box->x, box->y, box->z, | 
 | 			  box->w, box->h, box->d, box_count, | 
 | 			  cmd->dma.guest.ptr.offset); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	kmap_offset = cmd->dma.guest.ptr.offset >> PAGE_SHIFT; | 
 | 	kmap_num = (64*64*4) >> PAGE_SHIFT; | 
 |  | 
 | 	ret = ttm_bo_reserve(bo, true, false, NULL); | 
 | 	if (unlikely(ret != 0)) { | 
 | 		DRM_ERROR("reserve failed\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ret = ttm_bo_kmap(bo, kmap_offset, kmap_num, &map); | 
 | 	if (unlikely(ret != 0)) | 
 | 		goto err_unreserve; | 
 |  | 
 | 	virtual = ttm_kmap_obj_virtual(&map, &dummy); | 
 |  | 
 | 	if (box->w == 64 && cmd->dma.guest.pitch == 64*4) { | 
 | 		memcpy(srf->snooper.image, virtual, 64*64*4); | 
 | 	} else { | 
 | 		/* Image is unsigned pointer. */ | 
 | 		for (i = 0; i < box->h; i++) | 
 | 			memcpy(srf->snooper.image + i * 64, | 
 | 			       virtual + i * cmd->dma.guest.pitch, | 
 | 			       box->w * 4); | 
 | 	} | 
 |  | 
 | 	srf->snooper.age++; | 
 |  | 
 | 	ttm_bo_kunmap(&map); | 
 | err_unreserve: | 
 | 	ttm_bo_unreserve(bo); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_legacy_hotspot_clear - Clear legacy hotspots | 
 |  * | 
 |  * @dev_priv: Pointer to the device private struct. | 
 |  * | 
 |  * Clears all legacy hotspots. | 
 |  */ | 
 | void vmw_kms_legacy_hotspot_clear(struct vmw_private *dev_priv) | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	struct vmw_display_unit *du; | 
 | 	struct drm_crtc *crtc; | 
 |  | 
 | 	drm_modeset_lock_all(dev); | 
 | 	drm_for_each_crtc(crtc, dev) { | 
 | 		du = vmw_crtc_to_du(crtc); | 
 |  | 
 | 		du->hotspot_x = 0; | 
 | 		du->hotspot_y = 0; | 
 | 	} | 
 | 	drm_modeset_unlock_all(dev); | 
 | } | 
 |  | 
 | void vmw_kms_cursor_post_execbuf(struct vmw_private *dev_priv) | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	struct vmw_display_unit *du; | 
 | 	struct drm_crtc *crtc; | 
 |  | 
 | 	mutex_lock(&dev->mode_config.mutex); | 
 |  | 
 | 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { | 
 | 		du = vmw_crtc_to_du(crtc); | 
 | 		if (!du->cursor_surface || | 
 | 		    du->cursor_age == du->cursor_surface->snooper.age) | 
 | 			continue; | 
 |  | 
 | 		du->cursor_age = du->cursor_surface->snooper.age; | 
 | 		vmw_cursor_update_image(dev_priv, | 
 | 					du->cursor_surface->snooper.image, | 
 | 					64, 64, | 
 | 					du->hotspot_x + du->core_hotspot_x, | 
 | 					du->hotspot_y + du->core_hotspot_y); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&dev->mode_config.mutex); | 
 | } | 
 |  | 
 |  | 
 | void vmw_du_cursor_plane_destroy(struct drm_plane *plane) | 
 | { | 
 | 	vmw_cursor_update_position(plane->dev->dev_private, false, 0, 0); | 
 |  | 
 | 	drm_plane_cleanup(plane); | 
 | } | 
 |  | 
 |  | 
 | void vmw_du_primary_plane_destroy(struct drm_plane *plane) | 
 | { | 
 | 	drm_plane_cleanup(plane); | 
 |  | 
 | 	/* Planes are static in our case so we don't free it */ | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_vps_unpin_surf - unpins resource associated with a framebuffer surface | 
 |  * | 
 |  * @vps: plane state associated with the display surface | 
 |  * @unreference: true if we also want to unreference the display. | 
 |  */ | 
 | void vmw_du_plane_unpin_surf(struct vmw_plane_state *vps, | 
 | 			     bool unreference) | 
 | { | 
 | 	if (vps->surf) { | 
 | 		if (vps->pinned) { | 
 | 			vmw_resource_unpin(&vps->surf->res); | 
 | 			vps->pinned--; | 
 | 		} | 
 |  | 
 | 		if (unreference) { | 
 | 			if (vps->pinned) | 
 | 				DRM_ERROR("Surface still pinned\n"); | 
 | 			vmw_surface_unreference(&vps->surf); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_plane_cleanup_fb - Unpins the cursor | 
 |  * | 
 |  * @plane:  display plane | 
 |  * @old_state: Contains the FB to clean up | 
 |  * | 
 |  * Unpins the framebuffer surface | 
 |  * | 
 |  * Returns 0 on success | 
 |  */ | 
 | void | 
 | vmw_du_plane_cleanup_fb(struct drm_plane *plane, | 
 | 			struct drm_plane_state *old_state) | 
 | { | 
 | 	struct vmw_plane_state *vps = vmw_plane_state_to_vps(old_state); | 
 |  | 
 | 	vmw_du_plane_unpin_surf(vps, false); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_cursor_plane_prepare_fb - Readies the cursor by referencing it | 
 |  * | 
 |  * @plane:  display plane | 
 |  * @new_state: info on the new plane state, including the FB | 
 |  * | 
 |  * Returns 0 on success | 
 |  */ | 
 | int | 
 | vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, | 
 | 			       struct drm_plane_state *new_state) | 
 | { | 
 | 	struct drm_framebuffer *fb = new_state->fb; | 
 | 	struct vmw_plane_state *vps = vmw_plane_state_to_vps(new_state); | 
 |  | 
 |  | 
 | 	if (vps->surf) | 
 | 		vmw_surface_unreference(&vps->surf); | 
 |  | 
 | 	if (vps->bo) | 
 | 		vmw_bo_unreference(&vps->bo); | 
 |  | 
 | 	if (fb) { | 
 | 		if (vmw_framebuffer_to_vfb(fb)->bo) { | 
 | 			vps->bo = vmw_framebuffer_to_vfbd(fb)->buffer; | 
 | 			vmw_bo_reference(vps->bo); | 
 | 		} else { | 
 | 			vps->surf = vmw_framebuffer_to_vfbs(fb)->surface; | 
 | 			vmw_surface_reference(vps->surf); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | void | 
 | vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, | 
 | 				  struct drm_plane_state *old_state) | 
 | { | 
 | 	struct drm_crtc *crtc = plane->state->crtc ?: old_state->crtc; | 
 | 	struct vmw_private *dev_priv = vmw_priv(crtc->dev); | 
 | 	struct vmw_display_unit *du = vmw_crtc_to_du(crtc); | 
 | 	struct vmw_plane_state *vps = vmw_plane_state_to_vps(plane->state); | 
 | 	s32 hotspot_x, hotspot_y; | 
 | 	int ret = 0; | 
 |  | 
 |  | 
 | 	hotspot_x = du->hotspot_x; | 
 | 	hotspot_y = du->hotspot_y; | 
 |  | 
 | 	if (plane->state->fb) { | 
 | 		hotspot_x += plane->state->fb->hot_x; | 
 | 		hotspot_y += plane->state->fb->hot_y; | 
 | 	} | 
 |  | 
 | 	du->cursor_surface = vps->surf; | 
 | 	du->cursor_bo = vps->bo; | 
 |  | 
 | 	if (vps->surf) { | 
 | 		du->cursor_age = du->cursor_surface->snooper.age; | 
 |  | 
 | 		ret = vmw_cursor_update_image(dev_priv, | 
 | 					      vps->surf->snooper.image, | 
 | 					      64, 64, hotspot_x, | 
 | 					      hotspot_y); | 
 | 	} else if (vps->bo) { | 
 | 		ret = vmw_cursor_update_bo(dev_priv, vps->bo, | 
 | 					   plane->state->crtc_w, | 
 | 					   plane->state->crtc_h, | 
 | 					   hotspot_x, hotspot_y); | 
 | 	} else { | 
 | 		vmw_cursor_update_position(dev_priv, false, 0, 0); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!ret) { | 
 | 		du->cursor_x = plane->state->crtc_x + du->set_gui_x; | 
 | 		du->cursor_y = plane->state->crtc_y + du->set_gui_y; | 
 |  | 
 | 		vmw_cursor_update_position(dev_priv, true, | 
 | 					   du->cursor_x + hotspot_x, | 
 | 					   du->cursor_y + hotspot_y); | 
 |  | 
 | 		du->core_hotspot_x = hotspot_x - du->hotspot_x; | 
 | 		du->core_hotspot_y = hotspot_y - du->hotspot_y; | 
 | 	} else { | 
 | 		DRM_ERROR("Failed to update cursor image\n"); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_primary_plane_atomic_check - check if the new state is okay | 
 |  * | 
 |  * @plane: display plane | 
 |  * @state: info on the new plane state, including the FB | 
 |  * | 
 |  * Check if the new state is settable given the current state.  Other | 
 |  * than what the atomic helper checks, we care about crtc fitting | 
 |  * the FB and maintaining one active framebuffer. | 
 |  * | 
 |  * Returns 0 on success | 
 |  */ | 
 | int vmw_du_primary_plane_atomic_check(struct drm_plane *plane, | 
 | 				      struct drm_plane_state *state) | 
 | { | 
 | 	struct drm_crtc_state *crtc_state = NULL; | 
 | 	struct drm_framebuffer *new_fb = state->fb; | 
 | 	int ret; | 
 |  | 
 | 	if (state->crtc) | 
 | 		crtc_state = drm_atomic_get_new_crtc_state(state->state, state->crtc); | 
 |  | 
 | 	ret = drm_atomic_helper_check_plane_state(state, crtc_state, | 
 | 						  DRM_PLANE_HELPER_NO_SCALING, | 
 | 						  DRM_PLANE_HELPER_NO_SCALING, | 
 | 						  false, true); | 
 |  | 
 | 	if (!ret && new_fb) { | 
 | 		struct drm_crtc *crtc = state->crtc; | 
 | 		struct vmw_connector_state *vcs; | 
 | 		struct vmw_display_unit *du = vmw_crtc_to_du(crtc); | 
 |  | 
 | 		vcs = vmw_connector_state_to_vcs(du->connector.state); | 
 | 	} | 
 |  | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_cursor_plane_atomic_check - check if the new state is okay | 
 |  * | 
 |  * @plane: cursor plane | 
 |  * @state: info on the new plane state | 
 |  * | 
 |  * This is a chance to fail if the new cursor state does not fit | 
 |  * our requirements. | 
 |  * | 
 |  * Returns 0 on success | 
 |  */ | 
 | int vmw_du_cursor_plane_atomic_check(struct drm_plane *plane, | 
 | 				     struct drm_plane_state *new_state) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct drm_crtc_state *crtc_state = NULL; | 
 | 	struct vmw_surface *surface = NULL; | 
 | 	struct drm_framebuffer *fb = new_state->fb; | 
 |  | 
 | 	if (new_state->crtc) | 
 | 		crtc_state = drm_atomic_get_new_crtc_state(new_state->state, | 
 | 							   new_state->crtc); | 
 |  | 
 | 	ret = drm_atomic_helper_check_plane_state(new_state, crtc_state, | 
 | 						  DRM_PLANE_HELPER_NO_SCALING, | 
 | 						  DRM_PLANE_HELPER_NO_SCALING, | 
 | 						  true, true); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Turning off */ | 
 | 	if (!fb) | 
 | 		return 0; | 
 |  | 
 | 	/* A lot of the code assumes this */ | 
 | 	if (new_state->crtc_w != 64 || new_state->crtc_h != 64) { | 
 | 		DRM_ERROR("Invalid cursor dimensions (%d, %d)\n", | 
 | 			  new_state->crtc_w, new_state->crtc_h); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!vmw_framebuffer_to_vfb(fb)->bo) | 
 | 		surface = vmw_framebuffer_to_vfbs(fb)->surface; | 
 |  | 
 | 	if (surface && !surface->snooper.image) { | 
 | 		DRM_ERROR("surface not suitable for cursor\n"); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, | 
 | 			     struct drm_crtc_state *new_state) | 
 | { | 
 | 	struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc); | 
 | 	int connector_mask = drm_connector_mask(&du->connector); | 
 | 	bool has_primary = new_state->plane_mask & | 
 | 			   drm_plane_mask(crtc->primary); | 
 |  | 
 | 	/* We always want to have an active plane with an active CRTC */ | 
 | 	if (has_primary != new_state->enable) | 
 | 		return -EINVAL; | 
 |  | 
 |  | 
 | 	if (new_state->connector_mask != connector_mask && | 
 | 	    new_state->connector_mask != 0) { | 
 | 		DRM_ERROR("Invalid connectors configuration\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Our virtual device does not have a dot clock, so use the logical | 
 | 	 * clock value as the dot clock. | 
 | 	 */ | 
 | 	if (new_state->mode.crtc_clock == 0) | 
 | 		new_state->adjusted_mode.crtc_clock = new_state->mode.clock; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, | 
 | 			      struct drm_crtc_state *old_crtc_state) | 
 | { | 
 | } | 
 |  | 
 |  | 
 | void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, | 
 | 			      struct drm_crtc_state *old_crtc_state) | 
 | { | 
 | 	struct drm_pending_vblank_event *event = crtc->state->event; | 
 |  | 
 | 	if (event) { | 
 | 		crtc->state->event = NULL; | 
 |  | 
 | 		spin_lock_irq(&crtc->dev->event_lock); | 
 | 		drm_crtc_send_vblank_event(crtc, event); | 
 | 		spin_unlock_irq(&crtc->dev->event_lock); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_crtc_duplicate_state - duplicate crtc state | 
 |  * @crtc: DRM crtc | 
 |  * | 
 |  * Allocates and returns a copy of the crtc state (both common and | 
 |  * vmw-specific) for the specified crtc. | 
 |  * | 
 |  * Returns: The newly allocated crtc state, or NULL on failure. | 
 |  */ | 
 | struct drm_crtc_state * | 
 | vmw_du_crtc_duplicate_state(struct drm_crtc *crtc) | 
 | { | 
 | 	struct drm_crtc_state *state; | 
 | 	struct vmw_crtc_state *vcs; | 
 |  | 
 | 	if (WARN_ON(!crtc->state)) | 
 | 		return NULL; | 
 |  | 
 | 	vcs = kmemdup(crtc->state, sizeof(*vcs), GFP_KERNEL); | 
 |  | 
 | 	if (!vcs) | 
 | 		return NULL; | 
 |  | 
 | 	state = &vcs->base; | 
 |  | 
 | 	__drm_atomic_helper_crtc_duplicate_state(crtc, state); | 
 |  | 
 | 	return state; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_crtc_reset - creates a blank vmw crtc state | 
 |  * @crtc: DRM crtc | 
 |  * | 
 |  * Resets the atomic state for @crtc by freeing the state pointer (which | 
 |  * might be NULL, e.g. at driver load time) and allocating a new empty state | 
 |  * object. | 
 |  */ | 
 | void vmw_du_crtc_reset(struct drm_crtc *crtc) | 
 | { | 
 | 	struct vmw_crtc_state *vcs; | 
 |  | 
 |  | 
 | 	if (crtc->state) { | 
 | 		__drm_atomic_helper_crtc_destroy_state(crtc->state); | 
 |  | 
 | 		kfree(vmw_crtc_state_to_vcs(crtc->state)); | 
 | 	} | 
 |  | 
 | 	vcs = kzalloc(sizeof(*vcs), GFP_KERNEL); | 
 |  | 
 | 	if (!vcs) { | 
 | 		DRM_ERROR("Cannot allocate vmw_crtc_state\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	crtc->state = &vcs->base; | 
 | 	crtc->state->crtc = crtc; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_crtc_destroy_state - destroy crtc state | 
 |  * @crtc: DRM crtc | 
 |  * @state: state object to destroy | 
 |  * | 
 |  * Destroys the crtc state (both common and vmw-specific) for the | 
 |  * specified plane. | 
 |  */ | 
 | void | 
 | vmw_du_crtc_destroy_state(struct drm_crtc *crtc, | 
 | 			  struct drm_crtc_state *state) | 
 | { | 
 | 	drm_atomic_helper_crtc_destroy_state(crtc, state); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_plane_duplicate_state - duplicate plane state | 
 |  * @plane: drm plane | 
 |  * | 
 |  * Allocates and returns a copy of the plane state (both common and | 
 |  * vmw-specific) for the specified plane. | 
 |  * | 
 |  * Returns: The newly allocated plane state, or NULL on failure. | 
 |  */ | 
 | struct drm_plane_state * | 
 | vmw_du_plane_duplicate_state(struct drm_plane *plane) | 
 | { | 
 | 	struct drm_plane_state *state; | 
 | 	struct vmw_plane_state *vps; | 
 |  | 
 | 	vps = kmemdup(plane->state, sizeof(*vps), GFP_KERNEL); | 
 |  | 
 | 	if (!vps) | 
 | 		return NULL; | 
 |  | 
 | 	vps->pinned = 0; | 
 | 	vps->cpp = 0; | 
 |  | 
 | 	/* Each ref counted resource needs to be acquired again */ | 
 | 	if (vps->surf) | 
 | 		(void) vmw_surface_reference(vps->surf); | 
 |  | 
 | 	if (vps->bo) | 
 | 		(void) vmw_bo_reference(vps->bo); | 
 |  | 
 | 	state = &vps->base; | 
 |  | 
 | 	__drm_atomic_helper_plane_duplicate_state(plane, state); | 
 |  | 
 | 	return state; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_plane_reset - creates a blank vmw plane state | 
 |  * @plane: drm plane | 
 |  * | 
 |  * Resets the atomic state for @plane by freeing the state pointer (which might | 
 |  * be NULL, e.g. at driver load time) and allocating a new empty state object. | 
 |  */ | 
 | void vmw_du_plane_reset(struct drm_plane *plane) | 
 | { | 
 | 	struct vmw_plane_state *vps; | 
 |  | 
 |  | 
 | 	if (plane->state) | 
 | 		vmw_du_plane_destroy_state(plane, plane->state); | 
 |  | 
 | 	vps = kzalloc(sizeof(*vps), GFP_KERNEL); | 
 |  | 
 | 	if (!vps) { | 
 | 		DRM_ERROR("Cannot allocate vmw_plane_state\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	__drm_atomic_helper_plane_reset(plane, &vps->base); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_plane_destroy_state - destroy plane state | 
 |  * @plane: DRM plane | 
 |  * @state: state object to destroy | 
 |  * | 
 |  * Destroys the plane state (both common and vmw-specific) for the | 
 |  * specified plane. | 
 |  */ | 
 | void | 
 | vmw_du_plane_destroy_state(struct drm_plane *plane, | 
 | 			   struct drm_plane_state *state) | 
 | { | 
 | 	struct vmw_plane_state *vps = vmw_plane_state_to_vps(state); | 
 |  | 
 |  | 
 | 	/* Should have been freed by cleanup_fb */ | 
 | 	if (vps->surf) | 
 | 		vmw_surface_unreference(&vps->surf); | 
 |  | 
 | 	if (vps->bo) | 
 | 		vmw_bo_unreference(&vps->bo); | 
 |  | 
 | 	drm_atomic_helper_plane_destroy_state(plane, state); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_connector_duplicate_state - duplicate connector state | 
 |  * @connector: DRM connector | 
 |  * | 
 |  * Allocates and returns a copy of the connector state (both common and | 
 |  * vmw-specific) for the specified connector. | 
 |  * | 
 |  * Returns: The newly allocated connector state, or NULL on failure. | 
 |  */ | 
 | struct drm_connector_state * | 
 | vmw_du_connector_duplicate_state(struct drm_connector *connector) | 
 | { | 
 | 	struct drm_connector_state *state; | 
 | 	struct vmw_connector_state *vcs; | 
 |  | 
 | 	if (WARN_ON(!connector->state)) | 
 | 		return NULL; | 
 |  | 
 | 	vcs = kmemdup(connector->state, sizeof(*vcs), GFP_KERNEL); | 
 |  | 
 | 	if (!vcs) | 
 | 		return NULL; | 
 |  | 
 | 	state = &vcs->base; | 
 |  | 
 | 	__drm_atomic_helper_connector_duplicate_state(connector, state); | 
 |  | 
 | 	return state; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_connector_reset - creates a blank vmw connector state | 
 |  * @connector: DRM connector | 
 |  * | 
 |  * Resets the atomic state for @connector by freeing the state pointer (which | 
 |  * might be NULL, e.g. at driver load time) and allocating a new empty state | 
 |  * object. | 
 |  */ | 
 | void vmw_du_connector_reset(struct drm_connector *connector) | 
 | { | 
 | 	struct vmw_connector_state *vcs; | 
 |  | 
 |  | 
 | 	if (connector->state) { | 
 | 		__drm_atomic_helper_connector_destroy_state(connector->state); | 
 |  | 
 | 		kfree(vmw_connector_state_to_vcs(connector->state)); | 
 | 	} | 
 |  | 
 | 	vcs = kzalloc(sizeof(*vcs), GFP_KERNEL); | 
 |  | 
 | 	if (!vcs) { | 
 | 		DRM_ERROR("Cannot allocate vmw_connector_state\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	__drm_atomic_helper_connector_reset(connector, &vcs->base); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_du_connector_destroy_state - destroy connector state | 
 |  * @connector: DRM connector | 
 |  * @state: state object to destroy | 
 |  * | 
 |  * Destroys the connector state (both common and vmw-specific) for the | 
 |  * specified plane. | 
 |  */ | 
 | void | 
 | vmw_du_connector_destroy_state(struct drm_connector *connector, | 
 | 			  struct drm_connector_state *state) | 
 | { | 
 | 	drm_atomic_helper_connector_destroy_state(connector, state); | 
 | } | 
 | /* | 
 |  * Generic framebuffer code | 
 |  */ | 
 |  | 
 | /* | 
 |  * Surface framebuffer code | 
 |  */ | 
 |  | 
 | static void vmw_framebuffer_surface_destroy(struct drm_framebuffer *framebuffer) | 
 | { | 
 | 	struct vmw_framebuffer_surface *vfbs = | 
 | 		vmw_framebuffer_to_vfbs(framebuffer); | 
 |  | 
 | 	drm_framebuffer_cleanup(framebuffer); | 
 | 	vmw_surface_unreference(&vfbs->surface); | 
 | 	if (vfbs->base.user_obj) | 
 | 		ttm_base_object_unref(&vfbs->base.user_obj); | 
 |  | 
 | 	kfree(vfbs); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_readback - Perform a readback from the screen system to | 
 |  * a buffer-object backed framebuffer. | 
 |  * | 
 |  * @dev_priv: Pointer to the device private structure. | 
 |  * @file_priv: Pointer to a struct drm_file identifying the caller. | 
 |  * Must be set to NULL if @user_fence_rep is NULL. | 
 |  * @vfb: Pointer to the buffer-object backed framebuffer. | 
 |  * @user_fence_rep: User-space provided structure for fence information. | 
 |  * Must be set to non-NULL if @file_priv is non-NULL. | 
 |  * @vclips: Array of clip rects. | 
 |  * @num_clips: Number of clip rects in @vclips. | 
 |  * | 
 |  * Returns 0 on success, negative error code on failure. -ERESTARTSYS if | 
 |  * interrupted. | 
 |  */ | 
 | int vmw_kms_readback(struct vmw_private *dev_priv, | 
 | 		     struct drm_file *file_priv, | 
 | 		     struct vmw_framebuffer *vfb, | 
 | 		     struct drm_vmw_fence_rep __user *user_fence_rep, | 
 | 		     struct drm_vmw_rect *vclips, | 
 | 		     uint32_t num_clips) | 
 | { | 
 | 	switch (dev_priv->active_display_unit) { | 
 | 	case vmw_du_screen_object: | 
 | 		return vmw_kms_sou_readback(dev_priv, file_priv, vfb, | 
 | 					    user_fence_rep, vclips, num_clips, | 
 | 					    NULL); | 
 | 	case vmw_du_screen_target: | 
 | 		return vmw_kms_stdu_dma(dev_priv, file_priv, vfb, | 
 | 					user_fence_rep, NULL, vclips, num_clips, | 
 | 					1, false, true, NULL); | 
 | 	default: | 
 | 		WARN_ONCE(true, | 
 | 			  "Readback called with invalid display system.\n"); | 
 | } | 
 |  | 
 | 	return -ENOSYS; | 
 | } | 
 |  | 
 |  | 
 | static const struct drm_framebuffer_funcs vmw_framebuffer_surface_funcs = { | 
 | 	.destroy = vmw_framebuffer_surface_destroy, | 
 | 	.dirty = drm_atomic_helper_dirtyfb, | 
 | }; | 
 |  | 
 | static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv, | 
 | 					   struct vmw_surface *surface, | 
 | 					   struct vmw_framebuffer **out, | 
 | 					   const struct drm_mode_fb_cmd2 | 
 | 					   *mode_cmd, | 
 | 					   bool is_bo_proxy) | 
 |  | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	struct vmw_framebuffer_surface *vfbs; | 
 | 	enum SVGA3dSurfaceFormat format; | 
 | 	int ret; | 
 | 	struct drm_format_name_buf format_name; | 
 |  | 
 | 	/* 3D is only supported on HWv8 and newer hosts */ | 
 | 	if (dev_priv->active_display_unit == vmw_du_legacy) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	/* | 
 | 	 * Sanity checks. | 
 | 	 */ | 
 |  | 
 | 	/* Surface must be marked as a scanout. */ | 
 | 	if (unlikely(!surface->scanout)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (unlikely(surface->mip_levels[0] != 1 || | 
 | 		     surface->num_sizes != 1 || | 
 | 		     surface->base_size.width < mode_cmd->width || | 
 | 		     surface->base_size.height < mode_cmd->height || | 
 | 		     surface->base_size.depth != 1)) { | 
 | 		DRM_ERROR("Incompatible surface dimensions " | 
 | 			  "for requested mode.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (mode_cmd->pixel_format) { | 
 | 	case DRM_FORMAT_ARGB8888: | 
 | 		format = SVGA3D_A8R8G8B8; | 
 | 		break; | 
 | 	case DRM_FORMAT_XRGB8888: | 
 | 		format = SVGA3D_X8R8G8B8; | 
 | 		break; | 
 | 	case DRM_FORMAT_RGB565: | 
 | 		format = SVGA3D_R5G6B5; | 
 | 		break; | 
 | 	case DRM_FORMAT_XRGB1555: | 
 | 		format = SVGA3D_A1R5G5B5; | 
 | 		break; | 
 | 	default: | 
 | 		DRM_ERROR("Invalid pixel format: %s\n", | 
 | 			  drm_get_format_name(mode_cmd->pixel_format, &format_name)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * For DX, surface format validation is done when surface->scanout | 
 | 	 * is set. | 
 | 	 */ | 
 | 	if (!dev_priv->has_dx && format != surface->format) { | 
 | 		DRM_ERROR("Invalid surface format for requested mode.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	vfbs = kzalloc(sizeof(*vfbs), GFP_KERNEL); | 
 | 	if (!vfbs) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out_err1; | 
 | 	} | 
 |  | 
 | 	drm_helper_mode_fill_fb_struct(dev, &vfbs->base.base, mode_cmd); | 
 | 	vfbs->surface = vmw_surface_reference(surface); | 
 | 	vfbs->base.user_handle = mode_cmd->handles[0]; | 
 | 	vfbs->is_bo_proxy = is_bo_proxy; | 
 |  | 
 | 	*out = &vfbs->base; | 
 |  | 
 | 	ret = drm_framebuffer_init(dev, &vfbs->base.base, | 
 | 				   &vmw_framebuffer_surface_funcs); | 
 | 	if (ret) | 
 | 		goto out_err2; | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_err2: | 
 | 	vmw_surface_unreference(&surface); | 
 | 	kfree(vfbs); | 
 | out_err1: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Buffer-object framebuffer code | 
 |  */ | 
 |  | 
 | static void vmw_framebuffer_bo_destroy(struct drm_framebuffer *framebuffer) | 
 | { | 
 | 	struct vmw_framebuffer_bo *vfbd = | 
 | 		vmw_framebuffer_to_vfbd(framebuffer); | 
 |  | 
 | 	drm_framebuffer_cleanup(framebuffer); | 
 | 	vmw_bo_unreference(&vfbd->buffer); | 
 | 	if (vfbd->base.user_obj) | 
 | 		ttm_base_object_unref(&vfbd->base.user_obj); | 
 |  | 
 | 	kfree(vfbd); | 
 | } | 
 |  | 
 | static int vmw_framebuffer_bo_dirty(struct drm_framebuffer *framebuffer, | 
 | 				    struct drm_file *file_priv, | 
 | 				    unsigned int flags, unsigned int color, | 
 | 				    struct drm_clip_rect *clips, | 
 | 				    unsigned int num_clips) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(framebuffer->dev); | 
 | 	struct vmw_framebuffer_bo *vfbd = | 
 | 		vmw_framebuffer_to_vfbd(framebuffer); | 
 | 	struct drm_clip_rect norect; | 
 | 	int ret, increment = 1; | 
 |  | 
 | 	drm_modeset_lock_all(dev_priv->dev); | 
 |  | 
 | 	ret = ttm_read_lock(&dev_priv->reservation_sem, true); | 
 | 	if (unlikely(ret != 0)) { | 
 | 		drm_modeset_unlock_all(dev_priv->dev); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (!num_clips) { | 
 | 		num_clips = 1; | 
 | 		clips = &norect; | 
 | 		norect.x1 = norect.y1 = 0; | 
 | 		norect.x2 = framebuffer->width; | 
 | 		norect.y2 = framebuffer->height; | 
 | 	} else if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY) { | 
 | 		num_clips /= 2; | 
 | 		increment = 2; | 
 | 	} | 
 |  | 
 | 	switch (dev_priv->active_display_unit) { | 
 | 	case vmw_du_legacy: | 
 | 		ret = vmw_kms_ldu_do_bo_dirty(dev_priv, &vfbd->base, 0, 0, | 
 | 					      clips, num_clips, increment); | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 		WARN_ONCE(true, "Dirty called with invalid display system.\n"); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	vmw_fifo_flush(dev_priv, false); | 
 | 	ttm_read_unlock(&dev_priv->reservation_sem); | 
 |  | 
 | 	drm_modeset_unlock_all(dev_priv->dev); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int vmw_framebuffer_bo_dirty_ext(struct drm_framebuffer *framebuffer, | 
 | 					struct drm_file *file_priv, | 
 | 					unsigned int flags, unsigned int color, | 
 | 					struct drm_clip_rect *clips, | 
 | 					unsigned int num_clips) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(framebuffer->dev); | 
 |  | 
 | 	if (dev_priv->active_display_unit == vmw_du_legacy) | 
 | 		return vmw_framebuffer_bo_dirty(framebuffer, file_priv, flags, | 
 | 						color, clips, num_clips); | 
 |  | 
 | 	return drm_atomic_helper_dirtyfb(framebuffer, file_priv, flags, color, | 
 | 					 clips, num_clips); | 
 | } | 
 |  | 
 | static const struct drm_framebuffer_funcs vmw_framebuffer_bo_funcs = { | 
 | 	.destroy = vmw_framebuffer_bo_destroy, | 
 | 	.dirty = vmw_framebuffer_bo_dirty_ext, | 
 | }; | 
 |  | 
 | /** | 
 |  * Pin the bofer in a location suitable for access by the | 
 |  * display system. | 
 |  */ | 
 | static int vmw_framebuffer_pin(struct vmw_framebuffer *vfb) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(vfb->base.dev); | 
 | 	struct vmw_buffer_object *buf; | 
 | 	struct ttm_placement *placement; | 
 | 	int ret; | 
 |  | 
 | 	buf = vfb->bo ?  vmw_framebuffer_to_vfbd(&vfb->base)->buffer : | 
 | 		vmw_framebuffer_to_vfbs(&vfb->base)->surface->res.backup; | 
 |  | 
 | 	if (!buf) | 
 | 		return 0; | 
 |  | 
 | 	switch (dev_priv->active_display_unit) { | 
 | 	case vmw_du_legacy: | 
 | 		vmw_overlay_pause_all(dev_priv); | 
 | 		ret = vmw_bo_pin_in_start_of_vram(dev_priv, buf, false); | 
 | 		vmw_overlay_resume_all(dev_priv); | 
 | 		break; | 
 | 	case vmw_du_screen_object: | 
 | 	case vmw_du_screen_target: | 
 | 		if (vfb->bo) { | 
 | 			if (dev_priv->capabilities & SVGA_CAP_3D) { | 
 | 				/* | 
 | 				 * Use surface DMA to get content to | 
 | 				 * sreen target surface. | 
 | 				 */ | 
 | 				placement = &vmw_vram_gmr_placement; | 
 | 			} else { | 
 | 				/* Use CPU blit. */ | 
 | 				placement = &vmw_sys_placement; | 
 | 			} | 
 | 		} else { | 
 | 			/* Use surface / image update */ | 
 | 			placement = &vmw_mob_placement; | 
 | 		} | 
 |  | 
 | 		return vmw_bo_pin_in_placement(dev_priv, buf, placement, false); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int vmw_framebuffer_unpin(struct vmw_framebuffer *vfb) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(vfb->base.dev); | 
 | 	struct vmw_buffer_object *buf; | 
 |  | 
 | 	buf = vfb->bo ?  vmw_framebuffer_to_vfbd(&vfb->base)->buffer : | 
 | 		vmw_framebuffer_to_vfbs(&vfb->base)->surface->res.backup; | 
 |  | 
 | 	if (WARN_ON(!buf)) | 
 | 		return 0; | 
 |  | 
 | 	return vmw_bo_unpin(dev_priv, buf, false); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_create_bo_proxy - create a proxy surface for the buffer object | 
 |  * | 
 |  * @dev: DRM device | 
 |  * @mode_cmd: parameters for the new surface | 
 |  * @bo_mob: MOB backing the buffer object | 
 |  * @srf_out: newly created surface | 
 |  * | 
 |  * When the content FB is a buffer object, we create a surface as a proxy to the | 
 |  * same buffer.  This way we can do a surface copy rather than a surface DMA. | 
 |  * This is a more efficient approach | 
 |  * | 
 |  * RETURNS: | 
 |  * 0 on success, error code otherwise | 
 |  */ | 
 | static int vmw_create_bo_proxy(struct drm_device *dev, | 
 | 			       const struct drm_mode_fb_cmd2 *mode_cmd, | 
 | 			       struct vmw_buffer_object *bo_mob, | 
 | 			       struct vmw_surface **srf_out) | 
 | { | 
 | 	uint32_t format; | 
 | 	struct drm_vmw_size content_base_size = {0}; | 
 | 	struct vmw_resource *res; | 
 | 	unsigned int bytes_pp; | 
 | 	struct drm_format_name_buf format_name; | 
 | 	int ret; | 
 |  | 
 | 	switch (mode_cmd->pixel_format) { | 
 | 	case DRM_FORMAT_ARGB8888: | 
 | 	case DRM_FORMAT_XRGB8888: | 
 | 		format = SVGA3D_X8R8G8B8; | 
 | 		bytes_pp = 4; | 
 | 		break; | 
 |  | 
 | 	case DRM_FORMAT_RGB565: | 
 | 	case DRM_FORMAT_XRGB1555: | 
 | 		format = SVGA3D_R5G6B5; | 
 | 		bytes_pp = 2; | 
 | 		break; | 
 |  | 
 | 	case 8: | 
 | 		format = SVGA3D_P8; | 
 | 		bytes_pp = 1; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		DRM_ERROR("Invalid framebuffer format %s\n", | 
 | 			  drm_get_format_name(mode_cmd->pixel_format, &format_name)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	content_base_size.width  = mode_cmd->pitches[0] / bytes_pp; | 
 | 	content_base_size.height = mode_cmd->height; | 
 | 	content_base_size.depth  = 1; | 
 |  | 
 | 	ret = vmw_surface_gb_priv_define(dev, | 
 | 					 0, /* kernel visible only */ | 
 | 					 0, /* flags */ | 
 | 					 format, | 
 | 					 true, /* can be a scanout buffer */ | 
 | 					 1, /* num of mip levels */ | 
 | 					 0, | 
 | 					 0, | 
 | 					 content_base_size, | 
 | 					 SVGA3D_MS_PATTERN_NONE, | 
 | 					 SVGA3D_MS_QUALITY_NONE, | 
 | 					 srf_out); | 
 | 	if (ret) { | 
 | 		DRM_ERROR("Failed to allocate proxy content buffer\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	res = &(*srf_out)->res; | 
 |  | 
 | 	/* Reserve and switch the backing mob. */ | 
 | 	mutex_lock(&res->dev_priv->cmdbuf_mutex); | 
 | 	(void) vmw_resource_reserve(res, false, true); | 
 | 	vmw_bo_unreference(&res->backup); | 
 | 	res->backup = vmw_bo_reference(bo_mob); | 
 | 	res->backup_offset = 0; | 
 | 	vmw_resource_unreserve(res, false, false, false, NULL, 0); | 
 | 	mutex_unlock(&res->dev_priv->cmdbuf_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | static int vmw_kms_new_framebuffer_bo(struct vmw_private *dev_priv, | 
 | 				      struct vmw_buffer_object *bo, | 
 | 				      struct vmw_framebuffer **out, | 
 | 				      const struct drm_mode_fb_cmd2 | 
 | 				      *mode_cmd) | 
 |  | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	struct vmw_framebuffer_bo *vfbd; | 
 | 	unsigned int requested_size; | 
 | 	struct drm_format_name_buf format_name; | 
 | 	int ret; | 
 |  | 
 | 	requested_size = mode_cmd->height * mode_cmd->pitches[0]; | 
 | 	if (unlikely(requested_size > bo->base.num_pages * PAGE_SIZE)) { | 
 | 		DRM_ERROR("Screen buffer object size is too small " | 
 | 			  "for requested mode.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Limited framebuffer color depth support for screen objects */ | 
 | 	if (dev_priv->active_display_unit == vmw_du_screen_object) { | 
 | 		switch (mode_cmd->pixel_format) { | 
 | 		case DRM_FORMAT_XRGB8888: | 
 | 		case DRM_FORMAT_ARGB8888: | 
 | 			break; | 
 | 		case DRM_FORMAT_XRGB1555: | 
 | 		case DRM_FORMAT_RGB565: | 
 | 			break; | 
 | 		default: | 
 | 			DRM_ERROR("Invalid pixel format: %s\n", | 
 | 				  drm_get_format_name(mode_cmd->pixel_format, &format_name)); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vfbd = kzalloc(sizeof(*vfbd), GFP_KERNEL); | 
 | 	if (!vfbd) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out_err1; | 
 | 	} | 
 |  | 
 | 	drm_helper_mode_fill_fb_struct(dev, &vfbd->base.base, mode_cmd); | 
 | 	vfbd->base.bo = true; | 
 | 	vfbd->buffer = vmw_bo_reference(bo); | 
 | 	vfbd->base.user_handle = mode_cmd->handles[0]; | 
 | 	*out = &vfbd->base; | 
 |  | 
 | 	ret = drm_framebuffer_init(dev, &vfbd->base.base, | 
 | 				   &vmw_framebuffer_bo_funcs); | 
 | 	if (ret) | 
 | 		goto out_err2; | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_err2: | 
 | 	vmw_bo_unreference(&bo); | 
 | 	kfree(vfbd); | 
 | out_err1: | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_kms_srf_ok - check if a surface can be created | 
 |  * | 
 |  * @width: requested width | 
 |  * @height: requested height | 
 |  * | 
 |  * Surfaces need to be less than texture size | 
 |  */ | 
 | static bool | 
 | vmw_kms_srf_ok(struct vmw_private *dev_priv, uint32_t width, uint32_t height) | 
 | { | 
 | 	if (width  > dev_priv->texture_max_width || | 
 | 	    height > dev_priv->texture_max_height) | 
 | 		return false; | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_new_framebuffer - Create a new framebuffer. | 
 |  * | 
 |  * @dev_priv: Pointer to device private struct. | 
 |  * @bo: Pointer to buffer object to wrap the kms framebuffer around. | 
 |  * Either @bo or @surface must be NULL. | 
 |  * @surface: Pointer to a surface to wrap the kms framebuffer around. | 
 |  * Either @bo or @surface must be NULL. | 
 |  * @only_2d: No presents will occur to this buffer object based framebuffer. | 
 |  * This helps the code to do some important optimizations. | 
 |  * @mode_cmd: Frame-buffer metadata. | 
 |  */ | 
 | struct vmw_framebuffer * | 
 | vmw_kms_new_framebuffer(struct vmw_private *dev_priv, | 
 | 			struct vmw_buffer_object *bo, | 
 | 			struct vmw_surface *surface, | 
 | 			bool only_2d, | 
 | 			const struct drm_mode_fb_cmd2 *mode_cmd) | 
 | { | 
 | 	struct vmw_framebuffer *vfb = NULL; | 
 | 	bool is_bo_proxy = false; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * We cannot use the SurfaceDMA command in an non-accelerated VM, | 
 | 	 * therefore, wrap the buffer object in a surface so we can use the | 
 | 	 * SurfaceCopy command. | 
 | 	 */ | 
 | 	if (vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height)  && | 
 | 	    bo && only_2d && | 
 | 	    mode_cmd->width > 64 &&  /* Don't create a proxy for cursor */ | 
 | 	    dev_priv->active_display_unit == vmw_du_screen_target) { | 
 | 		ret = vmw_create_bo_proxy(dev_priv->dev, mode_cmd, | 
 | 					  bo, &surface); | 
 | 		if (ret) | 
 | 			return ERR_PTR(ret); | 
 |  | 
 | 		is_bo_proxy = true; | 
 | 	} | 
 |  | 
 | 	/* Create the new framebuffer depending one what we have */ | 
 | 	if (surface) { | 
 | 		ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb, | 
 | 						      mode_cmd, | 
 | 						      is_bo_proxy); | 
 |  | 
 | 		/* | 
 | 		 * vmw_create_bo_proxy() adds a reference that is no longer | 
 | 		 * needed | 
 | 		 */ | 
 | 		if (is_bo_proxy) | 
 | 			vmw_surface_unreference(&surface); | 
 | 	} else if (bo) { | 
 | 		ret = vmw_kms_new_framebuffer_bo(dev_priv, bo, &vfb, | 
 | 						 mode_cmd); | 
 | 	} else { | 
 | 		BUG(); | 
 | 	} | 
 |  | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	vfb->pin = vmw_framebuffer_pin; | 
 | 	vfb->unpin = vmw_framebuffer_unpin; | 
 |  | 
 | 	return vfb; | 
 | } | 
 |  | 
 | /* | 
 |  * Generic Kernel modesetting functions | 
 |  */ | 
 |  | 
 | static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, | 
 | 						 struct drm_file *file_priv, | 
 | 						 const struct drm_mode_fb_cmd2 *mode_cmd) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; | 
 | 	struct vmw_framebuffer *vfb = NULL; | 
 | 	struct vmw_surface *surface = NULL; | 
 | 	struct vmw_buffer_object *bo = NULL; | 
 | 	struct ttm_base_object *user_obj; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Take a reference on the user object of the resource | 
 | 	 * backing the kms fb. This ensures that user-space handle | 
 | 	 * lookups on that resource will always work as long as | 
 | 	 * it's registered with a kms framebuffer. This is important, | 
 | 	 * since vmw_execbuf_process identifies resources in the | 
 | 	 * command stream using user-space handles. | 
 | 	 */ | 
 |  | 
 | 	user_obj = ttm_base_object_lookup(tfile, mode_cmd->handles[0]); | 
 | 	if (unlikely(user_obj == NULL)) { | 
 | 		DRM_ERROR("Could not locate requested kms frame buffer.\n"); | 
 | 		return ERR_PTR(-ENOENT); | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * End conditioned code. | 
 | 	 */ | 
 |  | 
 | 	/* returns either a bo or surface */ | 
 | 	ret = vmw_user_lookup_handle(dev_priv, tfile, | 
 | 				     mode_cmd->handles[0], | 
 | 				     &surface, &bo); | 
 | 	if (ret) | 
 | 		goto err_out; | 
 |  | 
 |  | 
 | 	if (!bo && | 
 | 	    !vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height)) { | 
 | 		DRM_ERROR("Surface size cannot exceed %dx%d", | 
 | 			dev_priv->texture_max_width, | 
 | 			dev_priv->texture_max_height); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 |  | 
 | 	vfb = vmw_kms_new_framebuffer(dev_priv, bo, surface, | 
 | 				      !(dev_priv->capabilities & SVGA_CAP_3D), | 
 | 				      mode_cmd); | 
 | 	if (IS_ERR(vfb)) { | 
 | 		ret = PTR_ERR(vfb); | 
 | 		goto err_out; | 
 |  	} | 
 |  | 
 | err_out: | 
 | 	/* vmw_user_lookup_handle takes one ref so does new_fb */ | 
 | 	if (bo) | 
 | 		vmw_bo_unreference(&bo); | 
 | 	if (surface) | 
 | 		vmw_surface_unreference(&surface); | 
 |  | 
 | 	if (ret) { | 
 | 		DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); | 
 | 		ttm_base_object_unref(&user_obj); | 
 | 		return ERR_PTR(ret); | 
 | 	} else | 
 | 		vfb->user_obj = user_obj; | 
 |  | 
 | 	return &vfb->base; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_check_display_memory - Validates display memory required for a | 
 |  * topology | 
 |  * @dev: DRM device | 
 |  * @num_rects: number of drm_rect in rects | 
 |  * @rects: array of drm_rect representing the topology to validate indexed by | 
 |  * crtc index. | 
 |  * | 
 |  * Returns: | 
 |  * 0 on success otherwise negative error code | 
 |  */ | 
 | static int vmw_kms_check_display_memory(struct drm_device *dev, | 
 | 					uint32_t num_rects, | 
 | 					struct drm_rect *rects) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	struct drm_rect bounding_box = {0}; | 
 | 	u64 total_pixels = 0, pixel_mem, bb_mem; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < num_rects; i++) { | 
 | 		/* | 
 | 		 * For STDU only individual screen (screen target) is limited by | 
 | 		 * SCREENTARGET_MAX_WIDTH/HEIGHT registers. | 
 | 		 */ | 
 | 		if (dev_priv->active_display_unit == vmw_du_screen_target && | 
 | 		    (drm_rect_width(&rects[i]) > dev_priv->stdu_max_width || | 
 | 		     drm_rect_height(&rects[i]) > dev_priv->stdu_max_height)) { | 
 | 			VMW_DEBUG_KMS("Screen size not supported.\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		/* Bounding box upper left is at (0,0). */ | 
 | 		if (rects[i].x2 > bounding_box.x2) | 
 | 			bounding_box.x2 = rects[i].x2; | 
 |  | 
 | 		if (rects[i].y2 > bounding_box.y2) | 
 | 			bounding_box.y2 = rects[i].y2; | 
 |  | 
 | 		total_pixels += (u64) drm_rect_width(&rects[i]) * | 
 | 			(u64) drm_rect_height(&rects[i]); | 
 | 	} | 
 |  | 
 | 	/* Virtual svga device primary limits are always in 32-bpp. */ | 
 | 	pixel_mem = total_pixels * 4; | 
 |  | 
 | 	/* | 
 | 	 * For HV10 and below prim_bb_mem is vram size. When | 
 | 	 * SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM is not present vram size is | 
 | 	 * limit on primary bounding box | 
 | 	 */ | 
 | 	if (pixel_mem > dev_priv->prim_bb_mem) { | 
 | 		VMW_DEBUG_KMS("Combined output size too large.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* SVGA_CAP_NO_BB_RESTRICTION is available for STDU only. */ | 
 | 	if (dev_priv->active_display_unit != vmw_du_screen_target || | 
 | 	    !(dev_priv->capabilities & SVGA_CAP_NO_BB_RESTRICTION)) { | 
 | 		bb_mem = (u64) bounding_box.x2 * bounding_box.y2 * 4; | 
 |  | 
 | 		if (bb_mem > dev_priv->prim_bb_mem) { | 
 | 			VMW_DEBUG_KMS("Topology is beyond supported limits.\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_crtc_state_and_lock - Return new or current crtc state with locked | 
 |  * crtc mutex | 
 |  * @state: The atomic state pointer containing the new atomic state | 
 |  * @crtc: The crtc | 
 |  * | 
 |  * This function returns the new crtc state if it's part of the state update. | 
 |  * Otherwise returns the current crtc state. It also makes sure that the | 
 |  * crtc mutex is locked. | 
 |  * | 
 |  * Returns: A valid crtc state pointer or NULL. It may also return a | 
 |  * pointer error, in particular -EDEADLK if locking needs to be rerun. | 
 |  */ | 
 | static struct drm_crtc_state * | 
 | vmw_crtc_state_and_lock(struct drm_atomic_state *state, struct drm_crtc *crtc) | 
 | { | 
 | 	struct drm_crtc_state *crtc_state; | 
 |  | 
 | 	crtc_state = drm_atomic_get_new_crtc_state(state, crtc); | 
 | 	if (crtc_state) { | 
 | 		lockdep_assert_held(&crtc->mutex.mutex.base); | 
 | 	} else { | 
 | 		int ret = drm_modeset_lock(&crtc->mutex, state->acquire_ctx); | 
 |  | 
 | 		if (ret != 0 && ret != -EALREADY) | 
 | 			return ERR_PTR(ret); | 
 |  | 
 | 		crtc_state = crtc->state; | 
 | 	} | 
 |  | 
 | 	return crtc_state; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_check_implicit - Verify that all implicit display units scan out | 
 |  * from the same fb after the new state is committed. | 
 |  * @dev: The drm_device. | 
 |  * @state: The new state to be checked. | 
 |  * | 
 |  * Returns: | 
 |  *   Zero on success, | 
 |  *   -EINVAL on invalid state, | 
 |  *   -EDEADLK if modeset locking needs to be rerun. | 
 |  */ | 
 | static int vmw_kms_check_implicit(struct drm_device *dev, | 
 | 				  struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_framebuffer *implicit_fb = NULL; | 
 | 	struct drm_crtc *crtc; | 
 | 	struct drm_crtc_state *crtc_state; | 
 | 	struct drm_plane_state *plane_state; | 
 |  | 
 | 	drm_for_each_crtc(crtc, dev) { | 
 | 		struct vmw_display_unit *du = vmw_crtc_to_du(crtc); | 
 |  | 
 | 		if (!du->is_implicit) | 
 | 			continue; | 
 |  | 
 | 		crtc_state = vmw_crtc_state_and_lock(state, crtc); | 
 | 		if (IS_ERR(crtc_state)) | 
 | 			return PTR_ERR(crtc_state); | 
 |  | 
 | 		if (!crtc_state || !crtc_state->enable) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * Can't move primary planes across crtcs, so this is OK. | 
 | 		 * It also means we don't need to take the plane mutex. | 
 | 		 */ | 
 | 		plane_state = du->primary.state; | 
 | 		if (plane_state->crtc != crtc) | 
 | 			continue; | 
 |  | 
 | 		if (!implicit_fb) | 
 | 			implicit_fb = plane_state->fb; | 
 | 		else if (implicit_fb != plane_state->fb) | 
 | 			return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_check_topology - Validates topology in drm_atomic_state | 
 |  * @dev: DRM device | 
 |  * @state: the driver state object | 
 |  * | 
 |  * Returns: | 
 |  * 0 on success otherwise negative error code | 
 |  */ | 
 | static int vmw_kms_check_topology(struct drm_device *dev, | 
 | 				  struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_crtc_state *old_crtc_state, *new_crtc_state; | 
 | 	struct drm_rect *rects; | 
 | 	struct drm_crtc *crtc; | 
 | 	uint32_t i; | 
 | 	int ret = 0; | 
 |  | 
 | 	rects = kcalloc(dev->mode_config.num_crtc, sizeof(struct drm_rect), | 
 | 			GFP_KERNEL); | 
 | 	if (!rects) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	drm_for_each_crtc(crtc, dev) { | 
 | 		struct vmw_display_unit *du = vmw_crtc_to_du(crtc); | 
 | 		struct drm_crtc_state *crtc_state; | 
 |  | 
 | 		i = drm_crtc_index(crtc); | 
 |  | 
 | 		crtc_state = vmw_crtc_state_and_lock(state, crtc); | 
 | 		if (IS_ERR(crtc_state)) { | 
 | 			ret = PTR_ERR(crtc_state); | 
 | 			goto clean; | 
 | 		} | 
 |  | 
 | 		if (!crtc_state) | 
 | 			continue; | 
 |  | 
 | 		if (crtc_state->enable) { | 
 | 			rects[i].x1 = du->gui_x; | 
 | 			rects[i].y1 = du->gui_y; | 
 | 			rects[i].x2 = du->gui_x + crtc_state->mode.hdisplay; | 
 | 			rects[i].y2 = du->gui_y + crtc_state->mode.vdisplay; | 
 | 		} else { | 
 | 			rects[i].x1 = 0; | 
 | 			rects[i].y1 = 0; | 
 | 			rects[i].x2 = 0; | 
 | 			rects[i].y2 = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Determine change to topology due to new atomic state */ | 
 | 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, | 
 | 				      new_crtc_state, i) { | 
 | 		struct vmw_display_unit *du = vmw_crtc_to_du(crtc); | 
 | 		struct drm_connector *connector; | 
 | 		struct drm_connector_state *conn_state; | 
 | 		struct vmw_connector_state *vmw_conn_state; | 
 |  | 
 | 		if (!du->pref_active && new_crtc_state->enable) { | 
 | 			VMW_DEBUG_KMS("Enabling a disabled display unit\n"); | 
 | 			ret = -EINVAL; | 
 | 			goto clean; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * For vmwgfx each crtc has only one connector attached and it | 
 | 		 * is not changed so don't really need to check the | 
 | 		 * crtc->connector_mask and iterate over it. | 
 | 		 */ | 
 | 		connector = &du->connector; | 
 | 		conn_state = drm_atomic_get_connector_state(state, connector); | 
 | 		if (IS_ERR(conn_state)) { | 
 | 			ret = PTR_ERR(conn_state); | 
 | 			goto clean; | 
 | 		} | 
 |  | 
 | 		vmw_conn_state = vmw_connector_state_to_vcs(conn_state); | 
 | 		vmw_conn_state->gui_x = du->gui_x; | 
 | 		vmw_conn_state->gui_y = du->gui_y; | 
 | 	} | 
 |  | 
 | 	ret = vmw_kms_check_display_memory(dev, dev->mode_config.num_crtc, | 
 | 					   rects); | 
 |  | 
 | clean: | 
 | 	kfree(rects); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_atomic_check_modeset- validate state object for modeset changes | 
 |  * | 
 |  * @dev: DRM device | 
 |  * @state: the driver state object | 
 |  * | 
 |  * This is a simple wrapper around drm_atomic_helper_check_modeset() for | 
 |  * us to assign a value to mode->crtc_clock so that | 
 |  * drm_calc_timestamping_constants() won't throw an error message | 
 |  * | 
 |  * Returns: | 
 |  * Zero for success or -errno | 
 |  */ | 
 | static int | 
 | vmw_kms_atomic_check_modeset(struct drm_device *dev, | 
 | 			     struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_crtc *crtc; | 
 | 	struct drm_crtc_state *crtc_state; | 
 | 	bool need_modeset = false; | 
 | 	int i, ret; | 
 |  | 
 | 	ret = drm_atomic_helper_check(dev, state); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = vmw_kms_check_implicit(dev, state); | 
 | 	if (ret) { | 
 | 		VMW_DEBUG_KMS("Invalid implicit state\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	for_each_new_crtc_in_state(state, crtc, crtc_state, i) { | 
 | 		if (drm_atomic_crtc_needs_modeset(crtc_state)) | 
 | 			need_modeset = true; | 
 | 	} | 
 |  | 
 | 	if (need_modeset) | 
 | 		return vmw_kms_check_topology(dev, state); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct drm_mode_config_funcs vmw_kms_funcs = { | 
 | 	.fb_create = vmw_kms_fb_create, | 
 | 	.atomic_check = vmw_kms_atomic_check_modeset, | 
 | 	.atomic_commit = drm_atomic_helper_commit, | 
 | }; | 
 |  | 
 | static int vmw_kms_generic_present(struct vmw_private *dev_priv, | 
 | 				   struct drm_file *file_priv, | 
 | 				   struct vmw_framebuffer *vfb, | 
 | 				   struct vmw_surface *surface, | 
 | 				   uint32_t sid, | 
 | 				   int32_t destX, int32_t destY, | 
 | 				   struct drm_vmw_rect *clips, | 
 | 				   uint32_t num_clips) | 
 | { | 
 | 	return vmw_kms_sou_do_surface_dirty(dev_priv, vfb, NULL, clips, | 
 | 					    &surface->res, destX, destY, | 
 | 					    num_clips, 1, NULL, NULL); | 
 | } | 
 |  | 
 |  | 
 | int vmw_kms_present(struct vmw_private *dev_priv, | 
 | 		    struct drm_file *file_priv, | 
 | 		    struct vmw_framebuffer *vfb, | 
 | 		    struct vmw_surface *surface, | 
 | 		    uint32_t sid, | 
 | 		    int32_t destX, int32_t destY, | 
 | 		    struct drm_vmw_rect *clips, | 
 | 		    uint32_t num_clips) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	switch (dev_priv->active_display_unit) { | 
 | 	case vmw_du_screen_target: | 
 | 		ret = vmw_kms_stdu_surface_dirty(dev_priv, vfb, NULL, clips, | 
 | 						 &surface->res, destX, destY, | 
 | 						 num_clips, 1, NULL, NULL); | 
 | 		break; | 
 | 	case vmw_du_screen_object: | 
 | 		ret = vmw_kms_generic_present(dev_priv, file_priv, vfb, surface, | 
 | 					      sid, destX, destY, clips, | 
 | 					      num_clips); | 
 | 		break; | 
 | 	default: | 
 | 		WARN_ONCE(true, | 
 | 			  "Present called with invalid display system.\n"); | 
 | 		ret = -ENOSYS; | 
 | 		break; | 
 | 	} | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	vmw_fifo_flush(dev_priv, false); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | vmw_kms_create_hotplug_mode_update_property(struct vmw_private *dev_priv) | 
 | { | 
 | 	if (dev_priv->hotplug_mode_update_property) | 
 | 		return; | 
 |  | 
 | 	dev_priv->hotplug_mode_update_property = | 
 | 		drm_property_create_range(dev_priv->dev, | 
 | 					  DRM_MODE_PROP_IMMUTABLE, | 
 | 					  "hotplug_mode_update", 0, 1); | 
 |  | 
 | 	if (!dev_priv->hotplug_mode_update_property) | 
 | 		return; | 
 |  | 
 | } | 
 |  | 
 | int vmw_kms_init(struct vmw_private *dev_priv) | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	int ret; | 
 |  | 
 | 	drm_mode_config_init(dev); | 
 | 	dev->mode_config.funcs = &vmw_kms_funcs; | 
 | 	dev->mode_config.min_width = 1; | 
 | 	dev->mode_config.min_height = 1; | 
 | 	dev->mode_config.max_width = dev_priv->texture_max_width; | 
 | 	dev->mode_config.max_height = dev_priv->texture_max_height; | 
 |  | 
 | 	drm_mode_create_suggested_offset_properties(dev); | 
 | 	vmw_kms_create_hotplug_mode_update_property(dev_priv); | 
 |  | 
 | 	ret = vmw_kms_stdu_init_display(dev_priv); | 
 | 	if (ret) { | 
 | 		ret = vmw_kms_sou_init_display(dev_priv); | 
 | 		if (ret) /* Fallback */ | 
 | 			ret = vmw_kms_ldu_init_display(dev_priv); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int vmw_kms_close(struct vmw_private *dev_priv) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * Docs says we should take the lock before calling this function | 
 | 	 * but since it destroys encoders and our destructor calls | 
 | 	 * drm_encoder_cleanup which takes the lock we deadlock. | 
 | 	 */ | 
 | 	drm_mode_config_cleanup(dev_priv->dev); | 
 | 	if (dev_priv->active_display_unit == vmw_du_legacy) | 
 | 		ret = vmw_kms_ldu_close_display(dev_priv); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int vmw_kms_cursor_bypass_ioctl(struct drm_device *dev, void *data, | 
 | 				struct drm_file *file_priv) | 
 | { | 
 | 	struct drm_vmw_cursor_bypass_arg *arg = data; | 
 | 	struct vmw_display_unit *du; | 
 | 	struct drm_crtc *crtc; | 
 | 	int ret = 0; | 
 |  | 
 |  | 
 | 	mutex_lock(&dev->mode_config.mutex); | 
 | 	if (arg->flags & DRM_VMW_CURSOR_BYPASS_ALL) { | 
 |  | 
 | 		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { | 
 | 			du = vmw_crtc_to_du(crtc); | 
 | 			du->hotspot_x = arg->xhot; | 
 | 			du->hotspot_y = arg->yhot; | 
 | 		} | 
 |  | 
 | 		mutex_unlock(&dev->mode_config.mutex); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	crtc = drm_crtc_find(dev, file_priv, arg->crtc_id); | 
 | 	if (!crtc) { | 
 | 		ret = -ENOENT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	du = vmw_crtc_to_du(crtc); | 
 |  | 
 | 	du->hotspot_x = arg->xhot; | 
 | 	du->hotspot_y = arg->yhot; | 
 |  | 
 | out: | 
 | 	mutex_unlock(&dev->mode_config.mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int vmw_kms_write_svga(struct vmw_private *vmw_priv, | 
 | 			unsigned width, unsigned height, unsigned pitch, | 
 | 			unsigned bpp, unsigned depth) | 
 | { | 
 | 	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK) | 
 | 		vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, pitch); | 
 | 	else if (vmw_fifo_have_pitchlock(vmw_priv)) | 
 | 		vmw_mmio_write(pitch, vmw_priv->mmio_virt + | 
 | 			       SVGA_FIFO_PITCHLOCK); | 
 | 	vmw_write(vmw_priv, SVGA_REG_WIDTH, width); | 
 | 	vmw_write(vmw_priv, SVGA_REG_HEIGHT, height); | 
 | 	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bpp); | 
 |  | 
 | 	if (vmw_read(vmw_priv, SVGA_REG_DEPTH) != depth) { | 
 | 		DRM_ERROR("Invalid depth %u for %u bpp, host expects %u\n", | 
 | 			  depth, bpp, vmw_read(vmw_priv, SVGA_REG_DEPTH)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int vmw_kms_save_vga(struct vmw_private *vmw_priv) | 
 | { | 
 | 	struct vmw_vga_topology_state *save; | 
 | 	uint32_t i; | 
 |  | 
 | 	vmw_priv->vga_width = vmw_read(vmw_priv, SVGA_REG_WIDTH); | 
 | 	vmw_priv->vga_height = vmw_read(vmw_priv, SVGA_REG_HEIGHT); | 
 | 	vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL); | 
 | 	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK) | 
 | 		vmw_priv->vga_pitchlock = | 
 | 		  vmw_read(vmw_priv, SVGA_REG_PITCHLOCK); | 
 | 	else if (vmw_fifo_have_pitchlock(vmw_priv)) | 
 | 		vmw_priv->vga_pitchlock = vmw_mmio_read(vmw_priv->mmio_virt + | 
 | 							SVGA_FIFO_PITCHLOCK); | 
 |  | 
 | 	if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY)) | 
 | 		return 0; | 
 |  | 
 | 	vmw_priv->num_displays = vmw_read(vmw_priv, | 
 | 					  SVGA_REG_NUM_GUEST_DISPLAYS); | 
 |  | 
 | 	if (vmw_priv->num_displays == 0) | 
 | 		vmw_priv->num_displays = 1; | 
 |  | 
 | 	for (i = 0; i < vmw_priv->num_displays; ++i) { | 
 | 		save = &vmw_priv->vga_save[i]; | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i); | 
 | 		save->primary = vmw_read(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY); | 
 | 		save->pos_x = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_X); | 
 | 		save->pos_y = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y); | 
 | 		save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH); | 
 | 		save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID); | 
 | 		if (i == 0 && vmw_priv->num_displays == 1 && | 
 | 		    save->width == 0 && save->height == 0) { | 
 |  | 
 | 			/* | 
 | 			 * It should be fairly safe to assume that these | 
 | 			 * values are uninitialized. | 
 | 			 */ | 
 |  | 
 | 			save->width = vmw_priv->vga_width - save->pos_x; | 
 | 			save->height = vmw_priv->vga_height - save->pos_y; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int vmw_kms_restore_vga(struct vmw_private *vmw_priv) | 
 | { | 
 | 	struct vmw_vga_topology_state *save; | 
 | 	uint32_t i; | 
 |  | 
 | 	vmw_write(vmw_priv, SVGA_REG_WIDTH, vmw_priv->vga_width); | 
 | 	vmw_write(vmw_priv, SVGA_REG_HEIGHT, vmw_priv->vga_height); | 
 | 	vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp); | 
 | 	if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK) | 
 | 		vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, | 
 | 			  vmw_priv->vga_pitchlock); | 
 | 	else if (vmw_fifo_have_pitchlock(vmw_priv)) | 
 | 		vmw_mmio_write(vmw_priv->vga_pitchlock, | 
 | 			       vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK); | 
 |  | 
 | 	if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY)) | 
 | 		return 0; | 
 |  | 
 | 	for (i = 0; i < vmw_priv->num_displays; ++i) { | 
 | 		save = &vmw_priv->vga_save[i]; | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, save->primary); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, save->pos_x); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, save->pos_y); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, save->width); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, save->height); | 
 | 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv, | 
 | 				uint32_t pitch, | 
 | 				uint32_t height) | 
 | { | 
 | 	return ((u64) pitch * (u64) height) < (u64) | 
 | 		((dev_priv->active_display_unit == vmw_du_screen_target) ? | 
 | 		 dev_priv->prim_bb_mem : dev_priv->vram_size); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * Function called by DRM code called with vbl_lock held. | 
 |  */ | 
 | u32 vmw_get_vblank_counter(struct drm_device *dev, unsigned int pipe) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * Function called by DRM code called with vbl_lock held. | 
 |  */ | 
 | int vmw_enable_vblank(struct drm_device *dev, unsigned int pipe) | 
 | { | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /** | 
 |  * Function called by DRM code called with vbl_lock held. | 
 |  */ | 
 | void vmw_disable_vblank(struct drm_device *dev, unsigned int pipe) | 
 | { | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_du_update_layout - Update the display unit with topology from resolution | 
 |  * plugin and generate DRM uevent | 
 |  * @dev_priv: device private | 
 |  * @num_rects: number of drm_rect in rects | 
 |  * @rects: toplogy to update | 
 |  */ | 
 | static int vmw_du_update_layout(struct vmw_private *dev_priv, | 
 | 				unsigned int num_rects, struct drm_rect *rects) | 
 | { | 
 | 	struct drm_device *dev = dev_priv->dev; | 
 | 	struct vmw_display_unit *du; | 
 | 	struct drm_connector *con; | 
 | 	struct drm_connector_list_iter conn_iter; | 
 | 	struct drm_modeset_acquire_ctx ctx; | 
 | 	struct drm_crtc *crtc; | 
 | 	int ret; | 
 |  | 
 | 	/* Currently gui_x/y is protected with the crtc mutex */ | 
 | 	mutex_lock(&dev->mode_config.mutex); | 
 | 	drm_modeset_acquire_init(&ctx, 0); | 
 | retry: | 
 | 	drm_for_each_crtc(crtc, dev) { | 
 | 		ret = drm_modeset_lock(&crtc->mutex, &ctx); | 
 | 		if (ret < 0) { | 
 | 			if (ret == -EDEADLK) { | 
 | 				drm_modeset_backoff(&ctx); | 
 | 				goto retry; | 
 |       		} | 
 | 			goto out_fini; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	drm_connector_list_iter_begin(dev, &conn_iter); | 
 | 	drm_for_each_connector_iter(con, &conn_iter) { | 
 | 		du = vmw_connector_to_du(con); | 
 | 		if (num_rects > du->unit) { | 
 | 			du->pref_width = drm_rect_width(&rects[du->unit]); | 
 | 			du->pref_height = drm_rect_height(&rects[du->unit]); | 
 | 			du->pref_active = true; | 
 | 			du->gui_x = rects[du->unit].x1; | 
 | 			du->gui_y = rects[du->unit].y1; | 
 | 		} else { | 
 | 			du->pref_width = 800; | 
 | 			du->pref_height = 600; | 
 | 			du->pref_active = false; | 
 | 			du->gui_x = 0; | 
 | 			du->gui_y = 0; | 
 | 		} | 
 | 	} | 
 | 	drm_connector_list_iter_end(&conn_iter); | 
 |  | 
 | 	list_for_each_entry(con, &dev->mode_config.connector_list, head) { | 
 | 		du = vmw_connector_to_du(con); | 
 | 		if (num_rects > du->unit) { | 
 | 			drm_object_property_set_value | 
 | 			  (&con->base, dev->mode_config.suggested_x_property, | 
 | 			   du->gui_x); | 
 | 			drm_object_property_set_value | 
 | 			  (&con->base, dev->mode_config.suggested_y_property, | 
 | 			   du->gui_y); | 
 | 		} else { | 
 | 			drm_object_property_set_value | 
 | 			  (&con->base, dev->mode_config.suggested_x_property, | 
 | 			   0); | 
 | 			drm_object_property_set_value | 
 | 			  (&con->base, dev->mode_config.suggested_y_property, | 
 | 			   0); | 
 | 		} | 
 | 		con->status = vmw_du_connector_detect(con, true); | 
 | 	} | 
 |  | 
 | 	drm_sysfs_hotplug_event(dev); | 
 | out_fini: | 
 | 	drm_modeset_drop_locks(&ctx); | 
 | 	drm_modeset_acquire_fini(&ctx); | 
 | 	mutex_unlock(&dev->mode_config.mutex); | 
 |   | 
 | 	return 0; | 
 | } | 
 |  | 
 | int vmw_du_crtc_gamma_set(struct drm_crtc *crtc, | 
 | 			  u16 *r, u16 *g, u16 *b, | 
 | 			  uint32_t size, | 
 | 			  struct drm_modeset_acquire_ctx *ctx) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(crtc->dev); | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < size; i++) { | 
 | 		DRM_DEBUG("%d r/g/b = 0x%04x / 0x%04x / 0x%04x\n", i, | 
 | 			  r[i], g[i], b[i]); | 
 | 		vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 0, r[i] >> 8); | 
 | 		vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 1, g[i] >> 8); | 
 | 		vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 2, b[i] >> 8); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int vmw_du_connector_dpms(struct drm_connector *connector, int mode) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | enum drm_connector_status | 
 | vmw_du_connector_detect(struct drm_connector *connector, bool force) | 
 | { | 
 | 	uint32_t num_displays; | 
 | 	struct drm_device *dev = connector->dev; | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	struct vmw_display_unit *du = vmw_connector_to_du(connector); | 
 |  | 
 | 	num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS); | 
 |  | 
 | 	return ((vmw_connector_to_du(connector)->unit < num_displays && | 
 | 		 du->pref_active) ? | 
 | 		connector_status_connected : connector_status_disconnected); | 
 | } | 
 |  | 
 | static struct drm_display_mode vmw_kms_connector_builtin[] = { | 
 | 	/* 640x480@60Hz */ | 
 | 	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, | 
 | 		   752, 800, 0, 480, 489, 492, 525, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, | 
 | 	/* 800x600@60Hz */ | 
 | 	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, | 
 | 		   968, 1056, 0, 600, 601, 605, 628, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1024x768@60Hz */ | 
 | 	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, | 
 | 		   1184, 1344, 0, 768, 771, 777, 806, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, | 
 | 	/* 1152x864@75Hz */ | 
 | 	{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, | 
 | 		   1344, 1600, 0, 864, 865, 868, 900, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1280x768@60Hz */ | 
 | 	{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344, | 
 | 		   1472, 1664, 0, 768, 771, 778, 798, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1280x800@60Hz */ | 
 | 	{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352, | 
 | 		   1480, 1680, 0, 800, 803, 809, 831, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, | 
 | 	/* 1280x960@60Hz */ | 
 | 	{ DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376, | 
 | 		   1488, 1800, 0, 960, 961, 964, 1000, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1280x1024@60Hz */ | 
 | 	{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328, | 
 | 		   1440, 1688, 0, 1024, 1025, 1028, 1066, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1360x768@60Hz */ | 
 | 	{ DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424, | 
 | 		   1536, 1792, 0, 768, 771, 777, 795, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1440x1050@60Hz */ | 
 | 	{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488, | 
 | 		   1632, 1864, 0, 1050, 1053, 1057, 1089, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1440x900@60Hz */ | 
 | 	{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520, | 
 | 		   1672, 1904, 0, 900, 903, 909, 934, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1600x1200@60Hz */ | 
 | 	{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664, | 
 | 		   1856, 2160, 0, 1200, 1201, 1204, 1250, 0, | 
 | 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1680x1050@60Hz */ | 
 | 	{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784, | 
 | 		   1960, 2240, 0, 1050, 1053, 1059, 1089, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1792x1344@60Hz */ | 
 | 	{ DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920, | 
 | 		   2120, 2448, 0, 1344, 1345, 1348, 1394, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1853x1392@60Hz */ | 
 | 	{ DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952, | 
 | 		   2176, 2528, 0, 1392, 1393, 1396, 1439, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1920x1200@60Hz */ | 
 | 	{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056, | 
 | 		   2256, 2592, 0, 1200, 1203, 1209, 1245, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 1920x1440@60Hz */ | 
 | 	{ DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048, | 
 | 		   2256, 2600, 0, 1440, 1441, 1444, 1500, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* 2560x1600@60Hz */ | 
 | 	{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752, | 
 | 		   3032, 3504, 0, 1600, 1603, 1609, 1658, 0, | 
 | 		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, | 
 | 	/* Terminate */ | 
 | 	{ DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) }, | 
 | }; | 
 |  | 
 | /** | 
 |  * vmw_guess_mode_timing - Provide fake timings for a | 
 |  * 60Hz vrefresh mode. | 
 |  * | 
 |  * @mode - Pointer to a struct drm_display_mode with hdisplay and vdisplay | 
 |  * members filled in. | 
 |  */ | 
 | void vmw_guess_mode_timing(struct drm_display_mode *mode) | 
 | { | 
 | 	mode->hsync_start = mode->hdisplay + 50; | 
 | 	mode->hsync_end = mode->hsync_start + 50; | 
 | 	mode->htotal = mode->hsync_end + 50; | 
 |  | 
 | 	mode->vsync_start = mode->vdisplay + 50; | 
 | 	mode->vsync_end = mode->vsync_start + 50; | 
 | 	mode->vtotal = mode->vsync_end + 50; | 
 |  | 
 | 	mode->clock = (u32)mode->htotal * (u32)mode->vtotal / 100 * 6; | 
 | 	mode->vrefresh = drm_mode_vrefresh(mode); | 
 | } | 
 |  | 
 |  | 
 | int vmw_du_connector_fill_modes(struct drm_connector *connector, | 
 | 				uint32_t max_width, uint32_t max_height) | 
 | { | 
 | 	struct vmw_display_unit *du = vmw_connector_to_du(connector); | 
 | 	struct drm_device *dev = connector->dev; | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	struct drm_display_mode *mode = NULL; | 
 | 	struct drm_display_mode *bmode; | 
 | 	struct drm_display_mode prefmode = { DRM_MODE("preferred", | 
 | 		DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, | 
 | 		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, | 
 | 		DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) | 
 | 	}; | 
 | 	int i; | 
 | 	u32 assumed_bpp = 4; | 
 |  | 
 | 	if (dev_priv->assume_16bpp) | 
 | 		assumed_bpp = 2; | 
 |  | 
 | 	max_width  = min(max_width,  dev_priv->texture_max_width); | 
 | 	max_height = min(max_height, dev_priv->texture_max_height); | 
 |  | 
 | 	/* | 
 | 	 * For STDU extra limit for a mode on SVGA_REG_SCREENTARGET_MAX_WIDTH/ | 
 | 	 * HEIGHT registers. | 
 | 	 */ | 
 | 	if (dev_priv->active_display_unit == vmw_du_screen_target) { | 
 | 		max_width  = min(max_width,  dev_priv->stdu_max_width); | 
 | 		max_height = min(max_height, dev_priv->stdu_max_height); | 
 | 	} | 
 |  | 
 | 	/* Add preferred mode */ | 
 | 	mode = drm_mode_duplicate(dev, &prefmode); | 
 | 	if (!mode) | 
 | 		return 0; | 
 | 	mode->hdisplay = du->pref_width; | 
 | 	mode->vdisplay = du->pref_height; | 
 | 	vmw_guess_mode_timing(mode); | 
 |  | 
 | 	if (vmw_kms_validate_mode_vram(dev_priv, | 
 | 					mode->hdisplay * assumed_bpp, | 
 | 					mode->vdisplay)) { | 
 | 		drm_mode_probed_add(connector, mode); | 
 | 	} else { | 
 | 		drm_mode_destroy(dev, mode); | 
 | 		mode = NULL; | 
 | 	} | 
 |  | 
 | 	if (du->pref_mode) { | 
 | 		list_del_init(&du->pref_mode->head); | 
 | 		drm_mode_destroy(dev, du->pref_mode); | 
 | 	} | 
 |  | 
 | 	/* mode might be null here, this is intended */ | 
 | 	du->pref_mode = mode; | 
 |  | 
 | 	for (i = 0; vmw_kms_connector_builtin[i].type != 0; i++) { | 
 | 		bmode = &vmw_kms_connector_builtin[i]; | 
 | 		if (bmode->hdisplay > max_width || | 
 | 		    bmode->vdisplay > max_height) | 
 | 			continue; | 
 |  | 
 | 		if (!vmw_kms_validate_mode_vram(dev_priv, | 
 | 						bmode->hdisplay * assumed_bpp, | 
 | 						bmode->vdisplay)) | 
 | 			continue; | 
 |  | 
 | 		mode = drm_mode_duplicate(dev, bmode); | 
 | 		if (!mode) | 
 | 			return 0; | 
 | 		mode->vrefresh = drm_mode_vrefresh(mode); | 
 |  | 
 | 		drm_mode_probed_add(connector, mode); | 
 | 	} | 
 |  | 
 | 	drm_connector_list_update(connector); | 
 | 	/* Move the prefered mode first, help apps pick the right mode. */ | 
 | 	drm_mode_sort(&connector->modes); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_update_layout_ioctl - Handler for DRM_VMW_UPDATE_LAYOUT ioctl | 
 |  * @dev: drm device for the ioctl | 
 |  * @data: data pointer for the ioctl | 
 |  * @file_priv: drm file for the ioctl call | 
 |  * | 
 |  * Update preferred topology of display unit as per ioctl request. The topology | 
 |  * is expressed as array of drm_vmw_rect. | 
 |  * e.g. | 
 |  * [0 0 640 480] [640 0 800 600] [0 480 640 480] | 
 |  * | 
 |  * NOTE: | 
 |  * The x and y offset (upper left) in drm_vmw_rect cannot be less than 0. Beside | 
 |  * device limit on topology, x + w and y + h (lower right) cannot be greater | 
 |  * than INT_MAX. So topology beyond these limits will return with error. | 
 |  * | 
 |  * Returns: | 
 |  * Zero on success, negative errno on failure. | 
 |  */ | 
 | int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, | 
 | 				struct drm_file *file_priv) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	struct drm_mode_config *mode_config = &dev->mode_config; | 
 | 	struct drm_vmw_update_layout_arg *arg = | 
 | 		(struct drm_vmw_update_layout_arg *)data; | 
 | 	void __user *user_rects; | 
 | 	struct drm_vmw_rect *rects; | 
 | 	struct drm_rect *drm_rects; | 
 | 	unsigned rects_size; | 
 | 	int ret, i; | 
 |  | 
 | 	if (!arg->num_outputs) { | 
 | 		struct drm_rect def_rect = {0, 0, 800, 600}; | 
 | 		VMW_DEBUG_KMS("Default layout x1 = %d y1 = %d x2 = %d y2 = %d\n", | 
 | 			      def_rect.x1, def_rect.y1, | 
 | 			      def_rect.x2, def_rect.y2); | 
 | 		vmw_du_update_layout(dev_priv, 1, &def_rect); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect); | 
 | 	rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect), | 
 | 			GFP_KERNEL); | 
 | 	if (unlikely(!rects)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	user_rects = (void __user *)(unsigned long)arg->rects; | 
 | 	ret = copy_from_user(rects, user_rects, rects_size); | 
 | 	if (unlikely(ret != 0)) { | 
 | 		DRM_ERROR("Failed to get rects.\n"); | 
 | 		ret = -EFAULT; | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	drm_rects = (struct drm_rect *)rects; | 
 |  | 
 | 	VMW_DEBUG_KMS("Layout count = %u\n", arg->num_outputs); | 
 | 	for (i = 0; i < arg->num_outputs; i++) { | 
 | 		struct drm_vmw_rect curr_rect; | 
 |  | 
 | 		/* Verify user-space for overflow as kernel use drm_rect */ | 
 | 		if ((rects[i].x + rects[i].w > INT_MAX) || | 
 | 		    (rects[i].y + rects[i].h > INT_MAX)) { | 
 | 			ret = -ERANGE; | 
 | 			goto out_free; | 
 | 		} | 
 |  | 
 | 		curr_rect = rects[i]; | 
 | 		drm_rects[i].x1 = curr_rect.x; | 
 | 		drm_rects[i].y1 = curr_rect.y; | 
 | 		drm_rects[i].x2 = curr_rect.x + curr_rect.w; | 
 | 		drm_rects[i].y2 = curr_rect.y + curr_rect.h; | 
 |  | 
 | 		VMW_DEBUG_KMS("  x1 = %d y1 = %d x2 = %d y2 = %d\n", | 
 | 			      drm_rects[i].x1, drm_rects[i].y1, | 
 | 			      drm_rects[i].x2, drm_rects[i].y2); | 
 |  | 
 | 		/* | 
 | 		 * Currently this check is limiting the topology within | 
 | 		 * mode_config->max (which actually is max texture size | 
 | 		 * supported by virtual device). This limit is here to address | 
 | 		 * window managers that create a big framebuffer for whole | 
 | 		 * topology. | 
 | 		 */ | 
 | 		if (drm_rects[i].x1 < 0 ||  drm_rects[i].y1 < 0 || | 
 | 		    drm_rects[i].x2 > mode_config->max_width || | 
 | 		    drm_rects[i].y2 > mode_config->max_height) { | 
 | 			VMW_DEBUG_KMS("Invalid layout %d %d %d %d\n", | 
 | 				      drm_rects[i].x1, drm_rects[i].y1, | 
 | 				      drm_rects[i].x2, drm_rects[i].y2); | 
 | 			ret = -EINVAL; | 
 | 			goto out_free; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = vmw_kms_check_display_memory(dev, arg->num_outputs, drm_rects); | 
 |  | 
 | 	if (ret == 0) | 
 | 		vmw_du_update_layout(dev_priv, arg->num_outputs, drm_rects); | 
 |  | 
 | out_free: | 
 | 	kfree(rects); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_helper_dirty - Helper to build commands and perform actions based | 
 |  * on a set of cliprects and a set of display units. | 
 |  * | 
 |  * @dev_priv: Pointer to a device private structure. | 
 |  * @framebuffer: Pointer to the framebuffer on which to perform the actions. | 
 |  * @clips: A set of struct drm_clip_rect. Either this os @vclips must be NULL. | 
 |  * Cliprects are given in framebuffer coordinates. | 
 |  * @vclips: A set of struct drm_vmw_rect cliprects. Either this or @clips must | 
 |  * be NULL. Cliprects are given in source coordinates. | 
 |  * @dest_x: X coordinate offset for the crtc / destination clip rects. | 
 |  * @dest_y: Y coordinate offset for the crtc / destination clip rects. | 
 |  * @num_clips: Number of cliprects in the @clips or @vclips array. | 
 |  * @increment: Integer with which to increment the clip counter when looping. | 
 |  * Used to skip a predetermined number of clip rects. | 
 |  * @dirty: Closure structure. See the description of struct vmw_kms_dirty. | 
 |  */ | 
 | int vmw_kms_helper_dirty(struct vmw_private *dev_priv, | 
 | 			 struct vmw_framebuffer *framebuffer, | 
 | 			 const struct drm_clip_rect *clips, | 
 | 			 const struct drm_vmw_rect *vclips, | 
 | 			 s32 dest_x, s32 dest_y, | 
 | 			 int num_clips, | 
 | 			 int increment, | 
 | 			 struct vmw_kms_dirty *dirty) | 
 | { | 
 | 	struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; | 
 | 	struct drm_crtc *crtc; | 
 | 	u32 num_units = 0; | 
 | 	u32 i, k; | 
 |  | 
 | 	dirty->dev_priv = dev_priv; | 
 |  | 
 | 	/* If crtc is passed, no need to iterate over other display units */ | 
 | 	if (dirty->crtc) { | 
 | 		units[num_units++] = vmw_crtc_to_du(dirty->crtc); | 
 | 	} else { | 
 | 		list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, | 
 | 				    head) { | 
 | 			struct drm_plane *plane = crtc->primary; | 
 |  | 
 | 			if (plane->state->fb == &framebuffer->base) | 
 | 				units[num_units++] = vmw_crtc_to_du(crtc); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (k = 0; k < num_units; k++) { | 
 | 		struct vmw_display_unit *unit = units[k]; | 
 | 		s32 crtc_x = unit->crtc.x; | 
 | 		s32 crtc_y = unit->crtc.y; | 
 | 		s32 crtc_width = unit->crtc.mode.hdisplay; | 
 | 		s32 crtc_height = unit->crtc.mode.vdisplay; | 
 | 		const struct drm_clip_rect *clips_ptr = clips; | 
 | 		const struct drm_vmw_rect *vclips_ptr = vclips; | 
 |  | 
 | 		dirty->unit = unit; | 
 | 		if (dirty->fifo_reserve_size > 0) { | 
 | 			dirty->cmd = VMW_FIFO_RESERVE(dev_priv, | 
 | 						      dirty->fifo_reserve_size); | 
 | 			if (!dirty->cmd) | 
 | 				return -ENOMEM; | 
 |  | 
 | 			memset(dirty->cmd, 0, dirty->fifo_reserve_size); | 
 | 		} | 
 | 		dirty->num_hits = 0; | 
 | 		for (i = 0; i < num_clips; i++, clips_ptr += increment, | 
 | 		       vclips_ptr += increment) { | 
 | 			s32 clip_left; | 
 | 			s32 clip_top; | 
 |  | 
 | 			/* | 
 | 			 * Select clip array type. Note that integer type | 
 | 			 * in @clips is unsigned short, whereas in @vclips | 
 | 			 * it's 32-bit. | 
 | 			 */ | 
 | 			if (clips) { | 
 | 				dirty->fb_x = (s32) clips_ptr->x1; | 
 | 				dirty->fb_y = (s32) clips_ptr->y1; | 
 | 				dirty->unit_x2 = (s32) clips_ptr->x2 + dest_x - | 
 | 					crtc_x; | 
 | 				dirty->unit_y2 = (s32) clips_ptr->y2 + dest_y - | 
 | 					crtc_y; | 
 | 			} else { | 
 | 				dirty->fb_x = vclips_ptr->x; | 
 | 				dirty->fb_y = vclips_ptr->y; | 
 | 				dirty->unit_x2 = dirty->fb_x + vclips_ptr->w + | 
 | 					dest_x - crtc_x; | 
 | 				dirty->unit_y2 = dirty->fb_y + vclips_ptr->h + | 
 | 					dest_y - crtc_y; | 
 | 			} | 
 |  | 
 | 			dirty->unit_x1 = dirty->fb_x + dest_x - crtc_x; | 
 | 			dirty->unit_y1 = dirty->fb_y + dest_y - crtc_y; | 
 |  | 
 | 			/* Skip this clip if it's outside the crtc region */ | 
 | 			if (dirty->unit_x1 >= crtc_width || | 
 | 			    dirty->unit_y1 >= crtc_height || | 
 | 			    dirty->unit_x2 <= 0 || dirty->unit_y2 <= 0) | 
 | 				continue; | 
 |  | 
 | 			/* Clip right and bottom to crtc limits */ | 
 | 			dirty->unit_x2 = min_t(s32, dirty->unit_x2, | 
 | 					       crtc_width); | 
 | 			dirty->unit_y2 = min_t(s32, dirty->unit_y2, | 
 | 					       crtc_height); | 
 |  | 
 | 			/* Clip left and top to crtc limits */ | 
 | 			clip_left = min_t(s32, dirty->unit_x1, 0); | 
 | 			clip_top = min_t(s32, dirty->unit_y1, 0); | 
 | 			dirty->unit_x1 -= clip_left; | 
 | 			dirty->unit_y1 -= clip_top; | 
 | 			dirty->fb_x -= clip_left; | 
 | 			dirty->fb_y -= clip_top; | 
 |  | 
 | 			dirty->clip(dirty); | 
 | 		} | 
 |  | 
 | 		dirty->fifo_commit(dirty); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_helper_validation_finish - Helper for post KMS command submission | 
 |  * cleanup and fencing | 
 |  * @dev_priv: Pointer to the device-private struct | 
 |  * @file_priv: Pointer identifying the client when user-space fencing is used | 
 |  * @ctx: Pointer to the validation context | 
 |  * @out_fence: If non-NULL, returned refcounted fence-pointer | 
 |  * @user_fence_rep: If non-NULL, pointer to user-space address area | 
 |  * in which to copy user-space fence info | 
 |  */ | 
 | void vmw_kms_helper_validation_finish(struct vmw_private *dev_priv, | 
 | 				      struct drm_file *file_priv, | 
 | 				      struct vmw_validation_context *ctx, | 
 | 				      struct vmw_fence_obj **out_fence, | 
 | 				      struct drm_vmw_fence_rep __user * | 
 | 				      user_fence_rep) | 
 | { | 
 | 	struct vmw_fence_obj *fence = NULL; | 
 | 	uint32_t handle = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (file_priv || user_fence_rep || vmw_validation_has_bos(ctx) || | 
 | 	    out_fence) | 
 | 		ret = vmw_execbuf_fence_commands(file_priv, dev_priv, &fence, | 
 | 						 file_priv ? &handle : NULL); | 
 | 	vmw_validation_done(ctx, fence); | 
 | 	if (file_priv) | 
 | 		vmw_execbuf_copy_fence_user(dev_priv, vmw_fpriv(file_priv), | 
 | 					    ret, user_fence_rep, fence, | 
 | 					    handle, -1, NULL); | 
 | 	if (out_fence) | 
 | 		*out_fence = fence; | 
 | 	else | 
 | 		vmw_fence_obj_unreference(&fence); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_update_proxy - Helper function to update a proxy surface from | 
 |  * its backing MOB. | 
 |  * | 
 |  * @res: Pointer to the surface resource | 
 |  * @clips: Clip rects in framebuffer (surface) space. | 
 |  * @num_clips: Number of clips in @clips. | 
 |  * @increment: Integer with which to increment the clip counter when looping. | 
 |  * Used to skip a predetermined number of clip rects. | 
 |  * | 
 |  * This function makes sure the proxy surface is updated from its backing MOB | 
 |  * using the region given by @clips. The surface resource @res and its backing | 
 |  * MOB needs to be reserved and validated on call. | 
 |  */ | 
 | int vmw_kms_update_proxy(struct vmw_resource *res, | 
 | 			 const struct drm_clip_rect *clips, | 
 | 			 unsigned num_clips, | 
 | 			 int increment) | 
 | { | 
 | 	struct vmw_private *dev_priv = res->dev_priv; | 
 | 	struct drm_vmw_size *size = &vmw_res_to_srf(res)->base_size; | 
 | 	struct { | 
 | 		SVGA3dCmdHeader header; | 
 | 		SVGA3dCmdUpdateGBImage body; | 
 | 	} *cmd; | 
 | 	SVGA3dBox *box; | 
 | 	size_t copy_size = 0; | 
 | 	int i; | 
 |  | 
 | 	if (!clips) | 
 | 		return 0; | 
 |  | 
 | 	cmd = VMW_FIFO_RESERVE(dev_priv, sizeof(*cmd) * num_clips); | 
 | 	if (!cmd) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (i = 0; i < num_clips; ++i, clips += increment, ++cmd) { | 
 | 		box = &cmd->body.box; | 
 |  | 
 | 		cmd->header.id = SVGA_3D_CMD_UPDATE_GB_IMAGE; | 
 | 		cmd->header.size = sizeof(cmd->body); | 
 | 		cmd->body.image.sid = res->id; | 
 | 		cmd->body.image.face = 0; | 
 | 		cmd->body.image.mipmap = 0; | 
 |  | 
 | 		if (clips->x1 > size->width || clips->x2 > size->width || | 
 | 		    clips->y1 > size->height || clips->y2 > size->height) { | 
 | 			DRM_ERROR("Invalid clips outsize of framebuffer.\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		box->x = clips->x1; | 
 | 		box->y = clips->y1; | 
 | 		box->z = 0; | 
 | 		box->w = clips->x2 - clips->x1; | 
 | 		box->h = clips->y2 - clips->y1; | 
 | 		box->d = 1; | 
 |  | 
 | 		copy_size += sizeof(*cmd); | 
 | 	} | 
 |  | 
 | 	vmw_fifo_commit(dev_priv, copy_size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int vmw_kms_fbdev_init_data(struct vmw_private *dev_priv, | 
 | 			    unsigned unit, | 
 | 			    u32 max_width, | 
 | 			    u32 max_height, | 
 | 			    struct drm_connector **p_con, | 
 | 			    struct drm_crtc **p_crtc, | 
 | 			    struct drm_display_mode **p_mode) | 
 | { | 
 | 	struct drm_connector *con; | 
 | 	struct vmw_display_unit *du; | 
 | 	struct drm_display_mode *mode; | 
 | 	int i = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	mutex_lock(&dev_priv->dev->mode_config.mutex); | 
 | 	list_for_each_entry(con, &dev_priv->dev->mode_config.connector_list, | 
 | 			    head) { | 
 | 		if (i == unit) | 
 | 			break; | 
 |  | 
 | 		++i; | 
 | 	} | 
 |  | 
 | 	if (i != unit) { | 
 | 		DRM_ERROR("Could not find initial display unit.\n"); | 
 | 		ret = -EINVAL; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	if (list_empty(&con->modes)) | 
 | 		(void) vmw_du_connector_fill_modes(con, max_width, max_height); | 
 |  | 
 | 	if (list_empty(&con->modes)) { | 
 | 		DRM_ERROR("Could not find initial display mode.\n"); | 
 | 		ret = -EINVAL; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	du = vmw_connector_to_du(con); | 
 | 	*p_con = con; | 
 | 	*p_crtc = &du->crtc; | 
 |  | 
 | 	list_for_each_entry(mode, &con->modes, head) { | 
 | 		if (mode->type & DRM_MODE_TYPE_PREFERRED) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (mode->type & DRM_MODE_TYPE_PREFERRED) | 
 | 		*p_mode = mode; | 
 | 	else { | 
 | 		WARN_ONCE(true, "Could not find initial preferred mode.\n"); | 
 | 		*p_mode = list_first_entry(&con->modes, | 
 | 					   struct drm_display_mode, | 
 | 					   head); | 
 | 	} | 
 |  | 
 |  out_unlock: | 
 | 	mutex_unlock(&dev_priv->dev->mode_config.mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_create_implicit_placement_proparty - Set up the implicit placement | 
 |  * property. | 
 |  * | 
 |  * @dev_priv: Pointer to a device private struct. | 
 |  * | 
 |  * Sets up the implicit placement property unless it's already set up. | 
 |  */ | 
 | void | 
 | vmw_kms_create_implicit_placement_property(struct vmw_private *dev_priv) | 
 | { | 
 | 	if (dev_priv->implicit_placement_property) | 
 | 		return; | 
 |  | 
 | 	dev_priv->implicit_placement_property = | 
 | 		drm_property_create_range(dev_priv->dev, | 
 | 					  DRM_MODE_PROP_IMMUTABLE, | 
 | 					  "implicit_placement", 0, 1); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_suspend - Save modesetting state and turn modesetting off. | 
 |  * | 
 |  * @dev: Pointer to the drm device | 
 |  * Return: 0 on success. Negative error code on failure. | 
 |  */ | 
 | int vmw_kms_suspend(struct drm_device *dev) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 |  | 
 | 	dev_priv->suspend_state = drm_atomic_helper_suspend(dev); | 
 | 	if (IS_ERR(dev_priv->suspend_state)) { | 
 | 		int ret = PTR_ERR(dev_priv->suspend_state); | 
 |  | 
 | 		DRM_ERROR("Failed kms suspend: %d\n", ret); | 
 | 		dev_priv->suspend_state = NULL; | 
 |  | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * vmw_kms_resume - Re-enable modesetting and restore state | 
 |  * | 
 |  * @dev: Pointer to the drm device | 
 |  * Return: 0 on success. Negative error code on failure. | 
 |  * | 
 |  * State is resumed from a previous vmw_kms_suspend(). It's illegal | 
 |  * to call this function without a previous vmw_kms_suspend(). | 
 |  */ | 
 | int vmw_kms_resume(struct drm_device *dev) | 
 | { | 
 | 	struct vmw_private *dev_priv = vmw_priv(dev); | 
 | 	int ret; | 
 |  | 
 | 	if (WARN_ON(!dev_priv->suspend_state)) | 
 | 		return 0; | 
 |  | 
 | 	ret = drm_atomic_helper_resume(dev, dev_priv->suspend_state); | 
 | 	dev_priv->suspend_state = NULL; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_kms_lost_device - Notify kms that modesetting capabilities will be lost | 
 |  * | 
 |  * @dev: Pointer to the drm device | 
 |  */ | 
 | void vmw_kms_lost_device(struct drm_device *dev) | 
 | { | 
 | 	drm_atomic_helper_shutdown(dev); | 
 | } | 
 |  | 
 | /** | 
 |  * vmw_du_helper_plane_update - Helper to do plane update on a display unit. | 
 |  * @update: The closure structure. | 
 |  * | 
 |  * Call this helper after setting callbacks in &vmw_du_update_plane to do plane | 
 |  * update on display unit. | 
 |  * | 
 |  * Return: 0 on success or a negative error code on failure. | 
 |  */ | 
 | int vmw_du_helper_plane_update(struct vmw_du_update_plane *update) | 
 | { | 
 | 	struct drm_plane_state *state = update->plane->state; | 
 | 	struct drm_plane_state *old_state = update->old_state; | 
 | 	struct drm_atomic_helper_damage_iter iter; | 
 | 	struct drm_rect clip; | 
 | 	struct drm_rect bb; | 
 | 	DECLARE_VAL_CONTEXT(val_ctx, NULL, 0); | 
 | 	uint32_t reserved_size = 0; | 
 | 	uint32_t submit_size = 0; | 
 | 	uint32_t curr_size = 0; | 
 | 	uint32_t num_hits = 0; | 
 | 	void *cmd_start; | 
 | 	char *cmd_next; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Iterate in advance to check if really need plane update and find the | 
 | 	 * number of clips that actually are in plane src for fifo allocation. | 
 | 	 */ | 
 | 	drm_atomic_helper_damage_iter_init(&iter, old_state, state); | 
 | 	drm_atomic_for_each_plane_damage(&iter, &clip) | 
 | 		num_hits++; | 
 |  | 
 | 	if (num_hits == 0) | 
 | 		return 0; | 
 |  | 
 | 	if (update->vfb->bo) { | 
 | 		struct vmw_framebuffer_bo *vfbbo = | 
 | 			container_of(update->vfb, typeof(*vfbbo), base); | 
 |  | 
 | 		ret = vmw_validation_add_bo(&val_ctx, vfbbo->buffer, false, | 
 | 					    update->cpu_blit); | 
 | 	} else { | 
 | 		struct vmw_framebuffer_surface *vfbs = | 
 | 			container_of(update->vfb, typeof(*vfbs), base); | 
 |  | 
 | 		ret = vmw_validation_add_resource(&val_ctx, &vfbs->surface->res, | 
 | 						  0, VMW_RES_DIRTY_NONE, NULL, | 
 | 						  NULL); | 
 | 	} | 
 |  | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = vmw_validation_prepare(&val_ctx, update->mutex, update->intr); | 
 | 	if (ret) | 
 | 		goto out_unref; | 
 |  | 
 | 	reserved_size = update->calc_fifo_size(update, num_hits); | 
 | 	cmd_start = VMW_FIFO_RESERVE(update->dev_priv, reserved_size); | 
 | 	if (!cmd_start) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out_revert; | 
 | 	} | 
 |  | 
 | 	cmd_next = cmd_start; | 
 |  | 
 | 	if (update->post_prepare) { | 
 | 		curr_size = update->post_prepare(update, cmd_next); | 
 | 		cmd_next += curr_size; | 
 | 		submit_size += curr_size; | 
 | 	} | 
 |  | 
 | 	if (update->pre_clip) { | 
 | 		curr_size = update->pre_clip(update, cmd_next, num_hits); | 
 | 		cmd_next += curr_size; | 
 | 		submit_size += curr_size; | 
 | 	} | 
 |  | 
 | 	bb.x1 = INT_MAX; | 
 | 	bb.y1 = INT_MAX; | 
 | 	bb.x2 = INT_MIN; | 
 | 	bb.y2 = INT_MIN; | 
 |  | 
 | 	drm_atomic_helper_damage_iter_init(&iter, old_state, state); | 
 | 	drm_atomic_for_each_plane_damage(&iter, &clip) { | 
 | 		uint32_t fb_x = clip.x1; | 
 | 		uint32_t fb_y = clip.y1; | 
 |  | 
 | 		vmw_du_translate_to_crtc(state, &clip); | 
 | 		if (update->clip) { | 
 | 			curr_size = update->clip(update, cmd_next, &clip, fb_x, | 
 | 						 fb_y); | 
 | 			cmd_next += curr_size; | 
 | 			submit_size += curr_size; | 
 | 		} | 
 | 		bb.x1 = min_t(int, bb.x1, clip.x1); | 
 | 		bb.y1 = min_t(int, bb.y1, clip.y1); | 
 | 		bb.x2 = max_t(int, bb.x2, clip.x2); | 
 | 		bb.y2 = max_t(int, bb.y2, clip.y2); | 
 | 	} | 
 |  | 
 | 	curr_size = update->post_clip(update, cmd_next, &bb); | 
 | 	submit_size += curr_size; | 
 |  | 
 | 	if (reserved_size < submit_size) | 
 | 		submit_size = 0; | 
 |  | 
 | 	vmw_fifo_commit(update->dev_priv, submit_size); | 
 |  | 
 | 	vmw_kms_helper_validation_finish(update->dev_priv, NULL, &val_ctx, | 
 | 					 update->out_fence, NULL); | 
 | 	return ret; | 
 |  | 
 | out_revert: | 
 | 	vmw_validation_revert(&val_ctx); | 
 |  | 
 | out_unref: | 
 | 	vmw_validation_unref_lists(&val_ctx); | 
 | 	return ret; | 
 | } |