|  | /* | 
|  | * An rtc driver for the Dallas DS1511 | 
|  | * | 
|  | * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> | 
|  | * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * Real time clock driver for the Dallas 1511 chip, which also | 
|  | * contains a watchdog timer.  There is a tiny amount of code that | 
|  | * platform code could use to mess with the watchdog device a little | 
|  | * bit, but not a full watchdog driver. | 
|  | */ | 
|  |  | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/gfp.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #define DRV_VERSION "0.6" | 
|  |  | 
|  | enum ds1511reg { | 
|  | DS1511_SEC = 0x0, | 
|  | DS1511_MIN = 0x1, | 
|  | DS1511_HOUR = 0x2, | 
|  | DS1511_DOW = 0x3, | 
|  | DS1511_DOM = 0x4, | 
|  | DS1511_MONTH = 0x5, | 
|  | DS1511_YEAR = 0x6, | 
|  | DS1511_CENTURY = 0x7, | 
|  | DS1511_AM1_SEC = 0x8, | 
|  | DS1511_AM2_MIN = 0x9, | 
|  | DS1511_AM3_HOUR = 0xa, | 
|  | DS1511_AM4_DATE = 0xb, | 
|  | DS1511_WD_MSEC = 0xc, | 
|  | DS1511_WD_SEC = 0xd, | 
|  | DS1511_CONTROL_A = 0xe, | 
|  | DS1511_CONTROL_B = 0xf, | 
|  | DS1511_RAMADDR_LSB = 0x10, | 
|  | DS1511_RAMDATA = 0x13 | 
|  | }; | 
|  |  | 
|  | #define DS1511_BLF1	0x80 | 
|  | #define DS1511_BLF2	0x40 | 
|  | #define DS1511_PRS	0x20 | 
|  | #define DS1511_PAB	0x10 | 
|  | #define DS1511_TDF	0x08 | 
|  | #define DS1511_KSF	0x04 | 
|  | #define DS1511_WDF	0x02 | 
|  | #define DS1511_IRQF	0x01 | 
|  | #define DS1511_TE	0x80 | 
|  | #define DS1511_CS	0x40 | 
|  | #define DS1511_BME	0x20 | 
|  | #define DS1511_TPE	0x10 | 
|  | #define DS1511_TIE	0x08 | 
|  | #define DS1511_KIE	0x04 | 
|  | #define DS1511_WDE	0x02 | 
|  | #define DS1511_WDS	0x01 | 
|  | #define DS1511_RAM_MAX	0xff | 
|  |  | 
|  | #define RTC_CMD		DS1511_CONTROL_B | 
|  | #define RTC_CMD1	DS1511_CONTROL_A | 
|  |  | 
|  | #define RTC_ALARM_SEC	DS1511_AM1_SEC | 
|  | #define RTC_ALARM_MIN	DS1511_AM2_MIN | 
|  | #define RTC_ALARM_HOUR	DS1511_AM3_HOUR | 
|  | #define RTC_ALARM_DATE	DS1511_AM4_DATE | 
|  |  | 
|  | #define RTC_SEC		DS1511_SEC | 
|  | #define RTC_MIN		DS1511_MIN | 
|  | #define RTC_HOUR	DS1511_HOUR | 
|  | #define RTC_DOW		DS1511_DOW | 
|  | #define RTC_DOM		DS1511_DOM | 
|  | #define RTC_MON		DS1511_MONTH | 
|  | #define RTC_YEAR	DS1511_YEAR | 
|  | #define RTC_CENTURY	DS1511_CENTURY | 
|  |  | 
|  | #define RTC_TIE	DS1511_TIE | 
|  | #define RTC_TE	DS1511_TE | 
|  |  | 
|  | struct rtc_plat_data { | 
|  | struct rtc_device *rtc; | 
|  | void __iomem *ioaddr;		/* virtual base address */ | 
|  | int size;				/* amount of memory mapped */ | 
|  | int irq; | 
|  | unsigned int irqen; | 
|  | int alrm_sec; | 
|  | int alrm_min; | 
|  | int alrm_hour; | 
|  | int alrm_mday; | 
|  | spinlock_t lock; | 
|  | }; | 
|  |  | 
|  | static DEFINE_SPINLOCK(ds1511_lock); | 
|  |  | 
|  | static __iomem char *ds1511_base; | 
|  | static u32 reg_spacing = 1; | 
|  |  | 
|  | static noinline void | 
|  | rtc_write(uint8_t val, uint32_t reg) | 
|  | { | 
|  | writeb(val, ds1511_base + (reg * reg_spacing)); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | rtc_write_alarm(uint8_t val, enum ds1511reg reg) | 
|  | { | 
|  | rtc_write((val | 0x80), reg); | 
|  | } | 
|  |  | 
|  | static noinline uint8_t | 
|  | rtc_read(enum ds1511reg reg) | 
|  | { | 
|  | return readb(ds1511_base + (reg * reg_spacing)); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | rtc_disable_update(void) | 
|  | { | 
|  | rtc_write((rtc_read(RTC_CMD) & ~RTC_TE), RTC_CMD); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtc_enable_update(void) | 
|  | { | 
|  | rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * #define DS1511_WDOG_RESET_SUPPORT | 
|  | * | 
|  | * Uncomment this if you want to use these routines in | 
|  | * some platform code. | 
|  | */ | 
|  | #ifdef DS1511_WDOG_RESET_SUPPORT | 
|  | /* | 
|  | * just enough code to set the watchdog timer so that it | 
|  | * will reboot the system | 
|  | */ | 
|  | void | 
|  | ds1511_wdog_set(unsigned long deciseconds) | 
|  | { | 
|  | /* | 
|  | * the wdog timer can take 99.99 seconds | 
|  | */ | 
|  | deciseconds %= 10000; | 
|  | /* | 
|  | * set the wdog values in the wdog registers | 
|  | */ | 
|  | rtc_write(bin2bcd(deciseconds % 100), DS1511_WD_MSEC); | 
|  | rtc_write(bin2bcd(deciseconds / 100), DS1511_WD_SEC); | 
|  | /* | 
|  | * set wdog enable and wdog 'steering' bit to issue a reset | 
|  | */ | 
|  | rtc_write(DS1511_WDE | DS1511_WDS, RTC_CMD); | 
|  | } | 
|  |  | 
|  | void | 
|  | ds1511_wdog_disable(void) | 
|  | { | 
|  | /* | 
|  | * clear wdog enable and wdog 'steering' bits | 
|  | */ | 
|  | rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD); | 
|  | /* | 
|  | * clear the wdog counter | 
|  | */ | 
|  | rtc_write(0, DS1511_WD_MSEC); | 
|  | rtc_write(0, DS1511_WD_SEC); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * set the rtc chip's idea of the time. | 
|  | * stupidly, some callers call with year unmolested; | 
|  | * and some call with  year = year - 1900.  thanks. | 
|  | */ | 
|  | static int ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm) | 
|  | { | 
|  | u8 mon, day, dow, hrs, min, sec, yrs, cen; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * won't have to change this for a while | 
|  | */ | 
|  | if (rtc_tm->tm_year < 1900) { | 
|  | rtc_tm->tm_year += 1900; | 
|  | } | 
|  |  | 
|  | if (rtc_tm->tm_year < 1970) { | 
|  | return -EINVAL; | 
|  | } | 
|  | yrs = rtc_tm->tm_year % 100; | 
|  | cen = rtc_tm->tm_year / 100; | 
|  | mon = rtc_tm->tm_mon + 1;   /* tm_mon starts at zero */ | 
|  | day = rtc_tm->tm_mday; | 
|  | dow = rtc_tm->tm_wday & 0x7; /* automatic BCD */ | 
|  | hrs = rtc_tm->tm_hour; | 
|  | min = rtc_tm->tm_min; | 
|  | sec = rtc_tm->tm_sec; | 
|  |  | 
|  | if ((mon > 12) || (day == 0)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (day > rtc_month_days(rtc_tm->tm_mon, rtc_tm->tm_year)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if ((hrs >= 24) || (min >= 60) || (sec >= 60)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * each register is a different number of valid bits | 
|  | */ | 
|  | sec = bin2bcd(sec) & 0x7f; | 
|  | min = bin2bcd(min) & 0x7f; | 
|  | hrs = bin2bcd(hrs) & 0x3f; | 
|  | day = bin2bcd(day) & 0x3f; | 
|  | mon = bin2bcd(mon) & 0x1f; | 
|  | yrs = bin2bcd(yrs) & 0xff; | 
|  | cen = bin2bcd(cen) & 0xff; | 
|  |  | 
|  | spin_lock_irqsave(&ds1511_lock, flags); | 
|  | rtc_disable_update(); | 
|  | rtc_write(cen, RTC_CENTURY); | 
|  | rtc_write(yrs, RTC_YEAR); | 
|  | rtc_write((rtc_read(RTC_MON) & 0xe0) | mon, RTC_MON); | 
|  | rtc_write(day, RTC_DOM); | 
|  | rtc_write(hrs, RTC_HOUR); | 
|  | rtc_write(min, RTC_MIN); | 
|  | rtc_write(sec, RTC_SEC); | 
|  | rtc_write(dow, RTC_DOW); | 
|  | rtc_enable_update(); | 
|  | spin_unlock_irqrestore(&ds1511_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm) | 
|  | { | 
|  | unsigned int century; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ds1511_lock, flags); | 
|  | rtc_disable_update(); | 
|  |  | 
|  | rtc_tm->tm_sec = rtc_read(RTC_SEC) & 0x7f; | 
|  | rtc_tm->tm_min = rtc_read(RTC_MIN) & 0x7f; | 
|  | rtc_tm->tm_hour = rtc_read(RTC_HOUR) & 0x3f; | 
|  | rtc_tm->tm_mday = rtc_read(RTC_DOM) & 0x3f; | 
|  | rtc_tm->tm_wday = rtc_read(RTC_DOW) & 0x7; | 
|  | rtc_tm->tm_mon = rtc_read(RTC_MON) & 0x1f; | 
|  | rtc_tm->tm_year = rtc_read(RTC_YEAR) & 0x7f; | 
|  | century = rtc_read(RTC_CENTURY); | 
|  |  | 
|  | rtc_enable_update(); | 
|  | spin_unlock_irqrestore(&ds1511_lock, flags); | 
|  |  | 
|  | rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); | 
|  | rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); | 
|  | rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); | 
|  | rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); | 
|  | rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday); | 
|  | rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); | 
|  | rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); | 
|  | century = bcd2bin(century) * 100; | 
|  |  | 
|  | /* | 
|  | * Account for differences between how the RTC uses the values | 
|  | * and how they are defined in a struct rtc_time; | 
|  | */ | 
|  | century += rtc_tm->tm_year; | 
|  | rtc_tm->tm_year = century - 1900; | 
|  |  | 
|  | rtc_tm->tm_mon--; | 
|  |  | 
|  | if (rtc_valid_tm(rtc_tm) < 0) { | 
|  | dev_err(dev, "retrieved date/time is not valid.\n"); | 
|  | rtc_time_to_tm(0, rtc_tm); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * write the alarm register settings | 
|  | * | 
|  | * we only have the use to interrupt every second, otherwise | 
|  | * known as the update interrupt, or the interrupt if the whole | 
|  | * date/hours/mins/secs matches.  the ds1511 has many more | 
|  | * permutations, but the kernel doesn't. | 
|  | */ | 
|  | static void | 
|  | ds1511_rtc_update_alarm(struct rtc_plat_data *pdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&pdata->lock, flags); | 
|  | rtc_write(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ? | 
|  | 0x80 : bin2bcd(pdata->alrm_mday) & 0x3f, | 
|  | RTC_ALARM_DATE); | 
|  | rtc_write(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ? | 
|  | 0x80 : bin2bcd(pdata->alrm_hour) & 0x3f, | 
|  | RTC_ALARM_HOUR); | 
|  | rtc_write(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ? | 
|  | 0x80 : bin2bcd(pdata->alrm_min) & 0x7f, | 
|  | RTC_ALARM_MIN); | 
|  | rtc_write(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ? | 
|  | 0x80 : bin2bcd(pdata->alrm_sec) & 0x7f, | 
|  | RTC_ALARM_SEC); | 
|  | rtc_write(rtc_read(RTC_CMD) | (pdata->irqen ? RTC_TIE : 0), RTC_CMD); | 
|  | rtc_read(RTC_CMD1);	/* clear interrupts */ | 
|  | spin_unlock_irqrestore(&pdata->lock, flags); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (pdata->irq <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | pdata->alrm_mday = alrm->time.tm_mday; | 
|  | pdata->alrm_hour = alrm->time.tm_hour; | 
|  | pdata->alrm_min = alrm->time.tm_min; | 
|  | pdata->alrm_sec = alrm->time.tm_sec; | 
|  | if (alrm->enabled) { | 
|  | pdata->irqen |= RTC_AF; | 
|  | } | 
|  | ds1511_rtc_update_alarm(pdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (pdata->irq <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday; | 
|  | alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour; | 
|  | alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min; | 
|  | alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec; | 
|  | alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | ds1511_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct platform_device *pdev = dev_id; | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  | unsigned long events = 0; | 
|  |  | 
|  | spin_lock(&pdata->lock); | 
|  | /* | 
|  | * read and clear interrupt | 
|  | */ | 
|  | if (rtc_read(RTC_CMD1) & DS1511_IRQF) { | 
|  | events = RTC_IRQF; | 
|  | if (rtc_read(RTC_ALARM_SEC) & 0x80) | 
|  | events |= RTC_UF; | 
|  | else | 
|  | events |= RTC_AF; | 
|  | if (likely(pdata->rtc)) | 
|  | rtc_update_irq(pdata->rtc, 1, events); | 
|  | } | 
|  | spin_unlock(&pdata->lock); | 
|  | return events ? IRQ_HANDLED : IRQ_NONE; | 
|  | } | 
|  |  | 
|  | static int ds1511_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (pdata->irq <= 0) | 
|  | return -EINVAL; | 
|  | if (enabled) | 
|  | pdata->irqen |= RTC_AF; | 
|  | else | 
|  | pdata->irqen &= ~RTC_AF; | 
|  | ds1511_rtc_update_alarm(pdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops ds1511_rtc_ops = { | 
|  | .read_time		= ds1511_rtc_read_time, | 
|  | .set_time		= ds1511_rtc_set_time, | 
|  | .read_alarm		= ds1511_rtc_read_alarm, | 
|  | .set_alarm		= ds1511_rtc_set_alarm, | 
|  | .alarm_irq_enable	= ds1511_rtc_alarm_irq_enable, | 
|  | }; | 
|  |  | 
|  | static ssize_t | 
|  | ds1511_nvram_read(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *ba, | 
|  | char *buf, loff_t pos, size_t size) | 
|  | { | 
|  | ssize_t count; | 
|  |  | 
|  | /* | 
|  | * if count is more than one, turn on "burst" mode | 
|  | * turn it off when you're done | 
|  | */ | 
|  | if (size > 1) { | 
|  | rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); | 
|  | } | 
|  | if (pos > DS1511_RAM_MAX) { | 
|  | pos = DS1511_RAM_MAX; | 
|  | } | 
|  | if (size + pos > DS1511_RAM_MAX + 1) { | 
|  | size = DS1511_RAM_MAX - pos + 1; | 
|  | } | 
|  | rtc_write(pos, DS1511_RAMADDR_LSB); | 
|  | for (count = 0; size > 0; count++, size--) { | 
|  | *buf++ = rtc_read(DS1511_RAMDATA); | 
|  | } | 
|  | if (count > 1) { | 
|  | rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | ds1511_nvram_write(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *buf, loff_t pos, size_t size) | 
|  | { | 
|  | ssize_t count; | 
|  |  | 
|  | /* | 
|  | * if count is more than one, turn on "burst" mode | 
|  | * turn it off when you're done | 
|  | */ | 
|  | if (size > 1) { | 
|  | rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); | 
|  | } | 
|  | if (pos > DS1511_RAM_MAX) { | 
|  | pos = DS1511_RAM_MAX; | 
|  | } | 
|  | if (size + pos > DS1511_RAM_MAX + 1) { | 
|  | size = DS1511_RAM_MAX - pos + 1; | 
|  | } | 
|  | rtc_write(pos, DS1511_RAMADDR_LSB); | 
|  | for (count = 0; size > 0; count++, size--) { | 
|  | rtc_write(*buf++, DS1511_RAMDATA); | 
|  | } | 
|  | if (count > 1) { | 
|  | rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct bin_attribute ds1511_nvram_attr = { | 
|  | .attr = { | 
|  | .name = "nvram", | 
|  | .mode = S_IRUGO | S_IWUSR, | 
|  | }, | 
|  | .size = DS1511_RAM_MAX, | 
|  | .read = ds1511_nvram_read, | 
|  | .write = ds1511_nvram_write, | 
|  | }; | 
|  |  | 
|  | static int __devinit | 
|  | ds1511_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc; | 
|  | struct resource *res; | 
|  | struct rtc_plat_data *pdata; | 
|  | int ret = 0; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | return -ENODEV; | 
|  | } | 
|  | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  | pdata->size = res->end - res->start + 1; | 
|  | if (!devm_request_mem_region(&pdev->dev, res->start, pdata->size, | 
|  | pdev->name)) | 
|  | return -EBUSY; | 
|  | ds1511_base = devm_ioremap(&pdev->dev, res->start, pdata->size); | 
|  | if (!ds1511_base) | 
|  | return -ENOMEM; | 
|  | pdata->ioaddr = ds1511_base; | 
|  | pdata->irq = platform_get_irq(pdev, 0); | 
|  |  | 
|  | /* | 
|  | * turn on the clock and the crystal, etc. | 
|  | */ | 
|  | rtc_write(0, RTC_CMD); | 
|  | rtc_write(0, RTC_CMD1); | 
|  | /* | 
|  | * clear the wdog counter | 
|  | */ | 
|  | rtc_write(0, DS1511_WD_MSEC); | 
|  | rtc_write(0, DS1511_WD_SEC); | 
|  | /* | 
|  | * start the clock | 
|  | */ | 
|  | rtc_enable_update(); | 
|  |  | 
|  | /* | 
|  | * check for a dying bat-tree | 
|  | */ | 
|  | if (rtc_read(RTC_CMD1) & DS1511_BLF1) { | 
|  | dev_warn(&pdev->dev, "voltage-low detected.\n"); | 
|  | } | 
|  |  | 
|  | spin_lock_init(&pdata->lock); | 
|  | platform_set_drvdata(pdev, pdata); | 
|  | /* | 
|  | * if the platform has an interrupt in mind for this device, | 
|  | * then by all means, set it | 
|  | */ | 
|  | if (pdata->irq > 0) { | 
|  | rtc_read(RTC_CMD1); | 
|  | if (devm_request_irq(&pdev->dev, pdata->irq, ds1511_interrupt, | 
|  | IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) { | 
|  |  | 
|  | dev_warn(&pdev->dev, "interrupt not available.\n"); | 
|  | pdata->irq = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | rtc = rtc_device_register(pdev->name, &pdev->dev, &ds1511_rtc_ops, | 
|  | THIS_MODULE); | 
|  | if (IS_ERR(rtc)) | 
|  | return PTR_ERR(rtc); | 
|  | pdata->rtc = rtc; | 
|  |  | 
|  | ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); | 
|  | if (ret) | 
|  | rtc_device_unregister(pdata->rtc); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit | 
|  | ds1511_rtc_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  |  | 
|  | sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); | 
|  | rtc_device_unregister(pdata->rtc); | 
|  | if (pdata->irq > 0) { | 
|  | /* | 
|  | * disable the alarm interrupt | 
|  | */ | 
|  | rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD); | 
|  | rtc_read(RTC_CMD1); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* work with hotplug and coldplug */ | 
|  | MODULE_ALIAS("platform:ds1511"); | 
|  |  | 
|  | static struct platform_driver ds1511_rtc_driver = { | 
|  | .probe		= ds1511_rtc_probe, | 
|  | .remove		= __devexit_p(ds1511_rtc_remove), | 
|  | .driver		= { | 
|  | .name	= "ds1511", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | ds1511_rtc_init(void) | 
|  | { | 
|  | return platform_driver_register(&ds1511_rtc_driver); | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | ds1511_rtc_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&ds1511_rtc_driver); | 
|  | } | 
|  |  | 
|  | module_init(ds1511_rtc_init); | 
|  | module_exit(ds1511_rtc_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>"); | 
|  | MODULE_DESCRIPTION("Dallas DS1511 RTC driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); |