| // SPDX-License-Identifier: GPL-2.0-or-later | |
| // Copyright (C) IBM Corporation 2020 | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/fsi.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/spi/spi.h> | |
| #define FSI_ENGID_SPI 0x23 | |
| #define FSI_MBOX_ROOT_CTRL_8 0x2860 | |
| #define FSI_MBOX_ROOT_CTRL_8_SPI_MUX 0xf0000000 | |
| #define FSI2SPI_DATA0 0x00 | |
| #define FSI2SPI_DATA1 0x04 | |
| #define FSI2SPI_CMD 0x08 | |
| #define FSI2SPI_CMD_WRITE BIT(31) | |
| #define FSI2SPI_RESET 0x18 | |
| #define FSI2SPI_STATUS 0x1c | |
| #define FSI2SPI_STATUS_ANY_ERROR BIT(31) | |
| #define FSI2SPI_IRQ 0x20 | |
| #define SPI_FSI_BASE 0x70000 | |
| #define SPI_FSI_TIMEOUT_MS 1000 | |
| #define SPI_FSI_MAX_RX_SIZE 8 | |
| #define SPI_FSI_MAX_TX_SIZE 40 | |
| #define SPI_FSI_ERROR 0x0 | |
| #define SPI_FSI_COUNTER_CFG 0x1 | |
| #define SPI_FSI_CFG1 0x2 | |
| #define SPI_FSI_CLOCK_CFG 0x3 | |
| #define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32) | |
| #define SPI_FSI_CLOCK_CFG_ECC_DISABLE (BIT_ULL(35) | BIT_ULL(33)) | |
| #define SPI_FSI_CLOCK_CFG_RESET1 (BIT_ULL(36) | BIT_ULL(38)) | |
| #define SPI_FSI_CLOCK_CFG_RESET2 (BIT_ULL(37) | BIT_ULL(39)) | |
| #define SPI_FSI_CLOCK_CFG_MODE (BIT_ULL(41) | BIT_ULL(42)) | |
| #define SPI_FSI_CLOCK_CFG_SCK_RECV_DEL GENMASK_ULL(51, 44) | |
| #define SPI_FSI_CLOCK_CFG_SCK_NO_DEL BIT_ULL(51) | |
| #define SPI_FSI_CLOCK_CFG_SCK_DIV GENMASK_ULL(63, 52) | |
| #define SPI_FSI_MMAP 0x4 | |
| #define SPI_FSI_DATA_TX 0x5 | |
| #define SPI_FSI_DATA_RX 0x6 | |
| #define SPI_FSI_SEQUENCE 0x7 | |
| #define SPI_FSI_SEQUENCE_STOP 0x00 | |
| #define SPI_FSI_SEQUENCE_SEL_SLAVE(x) (0x10 | ((x) & 0xf)) | |
| #define SPI_FSI_SEQUENCE_SHIFT_OUT(x) (0x30 | ((x) & 0xf)) | |
| #define SPI_FSI_SEQUENCE_SHIFT_IN(x) (0x40 | ((x) & 0xf)) | |
| #define SPI_FSI_SEQUENCE_COPY_DATA_TX 0xc0 | |
| #define SPI_FSI_SEQUENCE_BRANCH(x) (0xe0 | ((x) & 0xf)) | |
| #define SPI_FSI_STATUS 0x8 | |
| #define SPI_FSI_STATUS_ERROR \ | |
| (GENMASK_ULL(31, 21) | GENMASK_ULL(15, 12)) | |
| #define SPI_FSI_STATUS_SEQ_STATE GENMASK_ULL(55, 48) | |
| #define SPI_FSI_STATUS_SEQ_STATE_IDLE BIT_ULL(48) | |
| #define SPI_FSI_STATUS_TDR_UNDERRUN BIT_ULL(57) | |
| #define SPI_FSI_STATUS_TDR_OVERRUN BIT_ULL(58) | |
| #define SPI_FSI_STATUS_TDR_FULL BIT_ULL(59) | |
| #define SPI_FSI_STATUS_RDR_UNDERRUN BIT_ULL(61) | |
| #define SPI_FSI_STATUS_RDR_OVERRUN BIT_ULL(62) | |
| #define SPI_FSI_STATUS_RDR_FULL BIT_ULL(63) | |
| #define SPI_FSI_STATUS_ANY_ERROR \ | |
| (SPI_FSI_STATUS_ERROR | \ | |
| SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \ | |
| SPI_FSI_STATUS_RDR_OVERRUN) | |
| #define SPI_FSI_PORT_CTRL 0x9 | |
| struct fsi2spi { | |
| struct fsi_device *fsi; /* FSI2SPI CFAM engine device */ | |
| struct mutex lock; /* lock access to the device */ | |
| }; | |
| struct fsi_spi { | |
| struct device *dev; /* SPI controller device */ | |
| struct fsi2spi *bridge; /* FSI2SPI device */ | |
| u32 base; | |
| }; | |
| struct fsi_spi_sequence { | |
| int bit; | |
| u64 data; | |
| }; | |
| static int fsi_spi_check_mux(struct fsi_device *fsi, struct device *dev) | |
| { | |
| int rc; | |
| u32 root_ctrl_8; | |
| __be32 root_ctrl_8_be; | |
| rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8_be, | |
| sizeof(root_ctrl_8_be)); | |
| if (rc) | |
| return rc; | |
| root_ctrl_8 = be32_to_cpu(root_ctrl_8_be); | |
| dev_dbg(dev, "Root control register 8: %08x\n", root_ctrl_8); | |
| if ((root_ctrl_8 & FSI_MBOX_ROOT_CTRL_8_SPI_MUX) == | |
| FSI_MBOX_ROOT_CTRL_8_SPI_MUX) | |
| return 0; | |
| return -ENOLINK; | |
| } | |
| static int fsi_spi_check_status(struct fsi_spi *ctx) | |
| { | |
| int rc; | |
| u32 sts; | |
| __be32 sts_be; | |
| rc = fsi_device_read(ctx->bridge->fsi, FSI2SPI_STATUS, &sts_be, | |
| sizeof(sts_be)); | |
| if (rc) | |
| return rc; | |
| sts = be32_to_cpu(sts_be); | |
| if (sts & FSI2SPI_STATUS_ANY_ERROR) { | |
| dev_err(ctx->dev, "Error with FSI2SPI interface: %08x.\n", sts); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static int fsi_spi_read_reg(struct fsi_spi *ctx, u32 offset, u64 *value) | |
| { | |
| int rc = 0; | |
| __be32 cmd_be; | |
| __be32 data_be; | |
| u32 cmd = offset + ctx->base; | |
| struct fsi2spi *bridge = ctx->bridge; | |
| *value = 0ULL; | |
| if (cmd & FSI2SPI_CMD_WRITE) | |
| return -EINVAL; | |
| rc = mutex_lock_interruptible(&bridge->lock); | |
| if (rc) | |
| return rc; | |
| cmd_be = cpu_to_be32(cmd); | |
| rc = fsi_device_write(bridge->fsi, FSI2SPI_CMD, &cmd_be, | |
| sizeof(cmd_be)); | |
| if (rc) | |
| goto unlock; | |
| rc = fsi_spi_check_status(ctx); | |
| if (rc) | |
| goto unlock; | |
| rc = fsi_device_read(bridge->fsi, FSI2SPI_DATA0, &data_be, | |
| sizeof(data_be)); | |
| if (rc) | |
| goto unlock; | |
| *value |= (u64)be32_to_cpu(data_be) << 32; | |
| rc = fsi_device_read(bridge->fsi, FSI2SPI_DATA1, &data_be, | |
| sizeof(data_be)); | |
| if (rc) | |
| goto unlock; | |
| *value |= (u64)be32_to_cpu(data_be); | |
| dev_dbg(ctx->dev, "Read %02x[%016llx].\n", offset, *value); | |
| unlock: | |
| mutex_unlock(&bridge->lock); | |
| return rc; | |
| } | |
| static int fsi_spi_write_reg(struct fsi_spi *ctx, u32 offset, u64 value) | |
| { | |
| int rc = 0; | |
| __be32 cmd_be; | |
| __be32 data_be; | |
| u32 cmd = offset + ctx->base; | |
| struct fsi2spi *bridge = ctx->bridge; | |
| if (cmd & FSI2SPI_CMD_WRITE) | |
| return -EINVAL; | |
| rc = mutex_lock_interruptible(&bridge->lock); | |
| if (rc) | |
| return rc; | |
| dev_dbg(ctx->dev, "Write %02x[%016llx].\n", offset, value); | |
| data_be = cpu_to_be32(upper_32_bits(value)); | |
| rc = fsi_device_write(bridge->fsi, FSI2SPI_DATA0, &data_be, | |
| sizeof(data_be)); | |
| if (rc) | |
| goto unlock; | |
| data_be = cpu_to_be32(lower_32_bits(value)); | |
| rc = fsi_device_write(bridge->fsi, FSI2SPI_DATA1, &data_be, | |
| sizeof(data_be)); | |
| if (rc) | |
| goto unlock; | |
| cmd_be = cpu_to_be32(cmd | FSI2SPI_CMD_WRITE); | |
| rc = fsi_device_write(bridge->fsi, FSI2SPI_CMD, &cmd_be, | |
| sizeof(cmd_be)); | |
| if (rc) | |
| goto unlock; | |
| rc = fsi_spi_check_status(ctx); | |
| unlock: | |
| mutex_unlock(&bridge->lock); | |
| return rc; | |
| } | |
| static int fsi_spi_data_in(u64 in, u8 *rx, int len) | |
| { | |
| int i; | |
| int num_bytes = min(len, 8); | |
| for (i = 0; i < num_bytes; ++i) | |
| rx[i] = (u8)(in >> (8 * ((num_bytes - 1) - i))); | |
| return num_bytes; | |
| } | |
| static int fsi_spi_data_out(u64 *out, const u8 *tx, int len) | |
| { | |
| int i; | |
| int num_bytes = min(len, 8); | |
| u8 *out_bytes = (u8 *)out; | |
| /* Unused bytes of the tx data should be 0. */ | |
| *out = 0ULL; | |
| for (i = 0; i < num_bytes; ++i) | |
| out_bytes[8 - (i + 1)] = tx[i]; | |
| return num_bytes; | |
| } | |
| static int fsi_spi_reset(struct fsi_spi *ctx) | |
| { | |
| int rc; | |
| dev_dbg(ctx->dev, "Resetting SPI controller.\n"); | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, | |
| SPI_FSI_CLOCK_CFG_RESET1); | |
| if (rc) | |
| return rc; | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, | |
| SPI_FSI_CLOCK_CFG_RESET2); | |
| if (rc) | |
| return rc; | |
| return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL); | |
| } | |
| static int fsi_spi_status(struct fsi_spi *ctx, u64 *status, const char *dir) | |
| { | |
| int rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, status); | |
| if (rc) | |
| return rc; | |
| if (*status & SPI_FSI_STATUS_ANY_ERROR) { | |
| dev_err(ctx->dev, "%s error: %016llx\n", dir, *status); | |
| rc = fsi_spi_reset(ctx); | |
| if (rc) | |
| return rc; | |
| return -EREMOTEIO; | |
| } | |
| return 0; | |
| } | |
| static void fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val) | |
| { | |
| /* | |
| * Add the next byte of instruction to the 8-byte sequence register. | |
| * Then decrement the counter so that the next instruction will go in | |
| * the right place. Return the index of the slot we just filled in the | |
| * sequence register. | |
| */ | |
| seq->data |= (u64)val << seq->bit; | |
| seq->bit -= 8; | |
| } | |
| static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq) | |
| { | |
| seq->bit = 56; | |
| seq->data = 0ULL; | |
| } | |
| static int fsi_spi_transfer_data(struct fsi_spi *ctx, | |
| struct spi_transfer *transfer) | |
| { | |
| int loops; | |
| int rc = 0; | |
| unsigned long end; | |
| u64 status = 0ULL; | |
| if (transfer->tx_buf) { | |
| int nb; | |
| int sent = 0; | |
| u64 out = 0ULL; | |
| const u8 *tx = transfer->tx_buf; | |
| while (transfer->len > sent) { | |
| nb = fsi_spi_data_out(&out, &tx[sent], | |
| (int)transfer->len - sent); | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, out); | |
| if (rc) | |
| return rc; | |
| loops = 0; | |
| end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS); | |
| do { | |
| if (loops++ && time_after(jiffies, end)) | |
| return -ETIMEDOUT; | |
| rc = fsi_spi_status(ctx, &status, "TX"); | |
| if (rc) | |
| return rc; | |
| } while (status & SPI_FSI_STATUS_TDR_FULL); | |
| sent += nb; | |
| } | |
| } else if (transfer->rx_buf) { | |
| int recv = 0; | |
| u64 in = 0ULL; | |
| u8 *rx = transfer->rx_buf; | |
| while (transfer->len > recv) { | |
| loops = 0; | |
| end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS); | |
| do { | |
| if (loops++ && time_after(jiffies, end)) | |
| return -ETIMEDOUT; | |
| rc = fsi_spi_status(ctx, &status, "RX"); | |
| if (rc) | |
| return rc; | |
| } while (!(status & SPI_FSI_STATUS_RDR_FULL)); | |
| rc = fsi_spi_read_reg(ctx, SPI_FSI_DATA_RX, &in); | |
| if (rc) | |
| return rc; | |
| recv += fsi_spi_data_in(in, &rx[recv], | |
| (int)transfer->len - recv); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int fsi_spi_transfer_init(struct fsi_spi *ctx) | |
| { | |
| int loops = 0; | |
| int rc; | |
| bool reset = false; | |
| unsigned long end; | |
| u64 seq_state; | |
| u64 clock_cfg = 0ULL; | |
| u64 status = 0ULL; | |
| u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE | | |
| SPI_FSI_CLOCK_CFG_SCK_NO_DEL | | |
| FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 19); | |
| end = jiffies + msecs_to_jiffies(SPI_FSI_TIMEOUT_MS); | |
| do { | |
| if (loops++ && time_after(jiffies, end)) | |
| return -ETIMEDOUT; | |
| rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, &status); | |
| if (rc) | |
| return rc; | |
| seq_state = status & SPI_FSI_STATUS_SEQ_STATE; | |
| if (status & (SPI_FSI_STATUS_ANY_ERROR | | |
| SPI_FSI_STATUS_TDR_FULL | | |
| SPI_FSI_STATUS_RDR_FULL)) { | |
| if (reset) { | |
| dev_err(ctx->dev, | |
| "Initialization error: %08llx\n", | |
| status); | |
| return -EIO; | |
| } | |
| rc = fsi_spi_reset(ctx); | |
| if (rc) | |
| return rc; | |
| reset = true; | |
| continue; | |
| } | |
| } while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE)); | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL); | |
| if (rc) | |
| return rc; | |
| rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg); | |
| if (rc) | |
| return rc; | |
| if ((clock_cfg & (SPI_FSI_CLOCK_CFG_MM_ENABLE | | |
| SPI_FSI_CLOCK_CFG_ECC_DISABLE | | |
| SPI_FSI_CLOCK_CFG_MODE | | |
| SPI_FSI_CLOCK_CFG_SCK_RECV_DEL | | |
| SPI_FSI_CLOCK_CFG_SCK_DIV)) != wanted_clock_cfg) | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG, | |
| wanted_clock_cfg); | |
| return rc; | |
| } | |
| static int fsi_spi_transfer_one_message(struct spi_controller *ctlr, | |
| struct spi_message *mesg) | |
| { | |
| int rc; | |
| u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(spi_get_chipselect(mesg->spi, 0) + 1); | |
| unsigned int len; | |
| struct spi_transfer *transfer; | |
| struct fsi_spi *ctx = spi_controller_get_devdata(ctlr); | |
| rc = fsi_spi_check_mux(ctx->bridge->fsi, ctx->dev); | |
| if (rc) | |
| goto error; | |
| list_for_each_entry(transfer, &mesg->transfers, transfer_list) { | |
| struct fsi_spi_sequence seq; | |
| struct spi_transfer *next = NULL; | |
| /* Sequencer must do shift out (tx) first. */ | |
| if (!transfer->tx_buf || transfer->len > SPI_FSI_MAX_TX_SIZE) { | |
| rc = -EINVAL; | |
| goto error; | |
| } | |
| dev_dbg(ctx->dev, "Start tx of %d bytes.\n", transfer->len); | |
| rc = fsi_spi_transfer_init(ctx); | |
| if (rc < 0) | |
| goto error; | |
| fsi_spi_sequence_init(&seq); | |
| fsi_spi_sequence_add(&seq, seq_slave); | |
| len = transfer->len; | |
| while (len > 8) { | |
| fsi_spi_sequence_add(&seq, | |
| SPI_FSI_SEQUENCE_SHIFT_OUT(8)); | |
| len -= 8; | |
| } | |
| fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len)); | |
| if (!list_is_last(&transfer->transfer_list, | |
| &mesg->transfers)) { | |
| next = list_next_entry(transfer, transfer_list); | |
| /* Sequencer can only do shift in (rx) after tx. */ | |
| if (next->rx_buf) { | |
| u8 shift; | |
| if (next->len > SPI_FSI_MAX_RX_SIZE) { | |
| rc = -EINVAL; | |
| goto error; | |
| } | |
| dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n", | |
| next->len); | |
| shift = SPI_FSI_SEQUENCE_SHIFT_IN(next->len); | |
| fsi_spi_sequence_add(&seq, shift); | |
| } else if (next->tx_buf) { | |
| if ((next->len + transfer->len) > (SPI_FSI_MAX_TX_SIZE + 8)) { | |
| rc = -EINVAL; | |
| goto error; | |
| } | |
| len = next->len; | |
| while (len > 8) { | |
| fsi_spi_sequence_add(&seq, | |
| SPI_FSI_SEQUENCE_SHIFT_OUT(8)); | |
| len -= 8; | |
| } | |
| fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len)); | |
| } else { | |
| next = NULL; | |
| } | |
| } | |
| fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SEL_SLAVE(0)); | |
| rc = fsi_spi_write_reg(ctx, SPI_FSI_SEQUENCE, seq.data); | |
| if (rc) | |
| goto error; | |
| rc = fsi_spi_transfer_data(ctx, transfer); | |
| if (rc) | |
| goto error; | |
| if (next) { | |
| rc = fsi_spi_transfer_data(ctx, next); | |
| if (rc) | |
| goto error; | |
| transfer = next; | |
| } | |
| } | |
| error: | |
| mesg->status = rc; | |
| spi_finalize_current_message(ctlr); | |
| return rc; | |
| } | |
| static size_t fsi_spi_max_transfer_size(struct spi_device *spi) | |
| { | |
| return SPI_FSI_MAX_RX_SIZE; | |
| } | |
| static int fsi_spi_probe(struct fsi_device *fsi) | |
| { | |
| int rc; | |
| int num_controllers_registered = 0; | |
| struct fsi2spi *bridge; | |
| struct device *dev = &fsi->dev; | |
| rc = fsi_spi_check_mux(fsi, dev); | |
| if (rc) | |
| return -ENODEV; | |
| bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL); | |
| if (!bridge) | |
| return -ENOMEM; | |
| bridge->fsi = fsi; | |
| mutex_init(&bridge->lock); | |
| for_each_available_child_of_node_scoped(dev->of_node, np) { | |
| u32 base; | |
| struct fsi_spi *ctx; | |
| struct spi_controller *ctlr; | |
| if (of_property_read_u32(np, "reg", &base)) | |
| continue; | |
| ctlr = devm_spi_alloc_host(dev, sizeof(*ctx)); | |
| if (!ctlr) | |
| break; | |
| ctlr->dev.of_node = np; | |
| ctlr->num_chipselect = of_get_available_child_count(np) ?: 1; | |
| ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; | |
| ctlr->max_transfer_size = fsi_spi_max_transfer_size; | |
| ctlr->transfer_one_message = fsi_spi_transfer_one_message; | |
| ctx = spi_controller_get_devdata(ctlr); | |
| ctx->dev = &ctlr->dev; | |
| ctx->bridge = bridge; | |
| ctx->base = base + SPI_FSI_BASE; | |
| rc = devm_spi_register_controller(dev, ctlr); | |
| if (rc) | |
| continue; | |
| num_controllers_registered++; | |
| } | |
| if (!num_controllers_registered) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static const struct fsi_device_id fsi_spi_ids[] = { | |
| { FSI_ENGID_SPI, FSI_VERSION_ANY }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(fsi, fsi_spi_ids); | |
| static struct fsi_driver fsi_spi_driver = { | |
| .id_table = fsi_spi_ids, | |
| .probe = fsi_spi_probe, | |
| .drv = { | |
| .name = "spi-fsi", | |
| }, | |
| }; | |
| module_fsi_driver(fsi_spi_driver); | |
| MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); | |
| MODULE_DESCRIPTION("FSI attached SPI controller"); | |
| MODULE_LICENSE("GPL"); |