| What: /config/nvmet/ports/N/addr_adrfam | |
| What: /config/nvmet/ports/N/addr_portid | |
| What: /config/nvmet/ports/N/addr_traddr | |
| What: /config/nvmet/ports/N/addr_trsvcid | |
| What: /config/nvmet/ports/N/addr_trtype | |
| What: /config/nvmet/ports/N/addr_treq | |
| Date: June 2016 | |
| KernelVersion: 4.8 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Address attributes for an NVMe-oF target port. | |
| addr_adrfam: Shows or sets the address family. Accepted | |
| values: "pcie", "ipv4", "ipv6", "ib", "fc", "pci", "loop". | |
| addr_portid: Shows or sets the port identifier (u16). | |
| addr_traddr: Shows or sets the transport address string. | |
| addr_trsvcid: Shows or sets the transport service identifier. | |
| addr_trtype: Shows or sets the transport type. Accepted | |
| values: "rdma", "fc", "tcp", "pci", "loop". Also | |
| initializes default TSAS values. | |
| addr_treq: Shows or sets the transport security requirements. | |
| Accepted values: "not specified", "required", | |
| "not required". For TCP with TLS1.3, "not specified" is | |
| rejected. | |
| All attributes require the port to be disabled before | |
| modification. | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_adrfam | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_portid | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_traddr | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_trsvcid | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_trtype | |
| What: /config/nvmet/ports/N/referrals/NAME/addr_treq | |
| What: /config/nvmet/ports/N/referrals/NAME/enable | |
| Date: June 2016 | |
| KernelVersion: 4.8 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Address attributes and enable control for a referral entry | |
| under a port. The addr_* attributes have the same semantics | |
| as the corresponding port-level attributes. The enable | |
| attribute shows or sets whether this referral is enabled | |
| (boolean). | |
| What: /config/nvmet/ports/N/param_inline_data_size | |
| Date: June 2018 | |
| KernelVersion: 4.19 | |
| Contact: Steve Wise <swise@opengridcomputing.com> | |
| Description: | |
| Shows or sets the inline data size for this port. Default | |
| is -1 which lets the transport choose. The port must be | |
| disabled before modification. | |
| What: /config/nvmet/ports/N/ana_groups/ID/ana_state | |
| Date: June 2018 | |
| KernelVersion: 4.19 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Shows or sets the ANA (Asymmetric Namespace Access) state | |
| for this group on this port. Accepted values: "optimized", | |
| "non-optimized", "inaccessible", "persistent-loss", | |
| "change". Changes trigger an ANA change event. | |
| What: /config/nvmet/ports/N/param_pi_enable | |
| Date: May 2020 | |
| KernelVersion: 5.8 | |
| Contact: Israel Rukshin <israelr@mellanox.com> | |
| Description: | |
| Shows or sets whether protection information (PI) is | |
| enabled/supported for this port. Accepts boolean value. | |
| Only available when CONFIG_BLK_DEV_INTEGRITY is enabled. | |
| The port must be disabled before modification. | |
| What: /config/nvmet/ports/N/addr_tsas | |
| Date: August 2023 | |
| KernelVersion: 6.7 | |
| Contact: Hannes Reinecke <hare@suse.de> | |
| Description: | |
| Shows or sets the transport-specific address subtype. For | |
| TCP transport, accepted values: "none", "tls1.3" (requires | |
| CONFIG_NVME_TARGET_TCP_TLS). For RDMA transport, shows the | |
| QP type: "connected" or "datagram". The port must be | |
| disabled before modification. | |
| What: /config/nvmet/ports/N/param_max_queue_size | |
| Date: January 2024 | |
| KernelVersion: 6.9 | |
| Contact: Max Gurtovoy <mgurtovoy@nvidia.com> | |
| Description: | |
| Shows or sets the maximum queue size for this port. Default | |
| is -1 which lets the transport choose. The port must be | |
| disabled before modification. | |
| What: /config/nvmet/ports/N/param_mdts | |
| Date: April 2026 | |
| KernelVersion: 7.1 | |
| Contact: Aurelien Aptel <aaptel@nvidia.com> | |
| Description: | |
| Shows or sets the maximum data transfer size for this port. | |
| Default is -1 which lets the transport choose. The port | |
| must be disabled before modification. | |
| What: /config/nvmet/subsystems/NAME/attr_allow_any_host | |
| Date: June 2016 | |
| KernelVersion: 4.8 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Shows or sets whether any host is allowed to connect. | |
| Accepts boolean value. Cannot be set to 1 if explicit | |
| hosts are linked in the allowed_hosts/ directory. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/device_path | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/device_nguid | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/enable | |
| Date: June 2016 | |
| KernelVersion: 4.8 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Namespace attributes added with the initial NVMe target. | |
| device_path: Shows or sets the backend block device path. | |
| The namespace must be disabled before modification. | |
| device_nguid: Shows or sets the NGUID (128-bit identifier). | |
| Accepts 32 hex digits with optional "-" or ":" separators. | |
| The namespace must be disabled before modification. | |
| enable: Shows or sets whether this namespace is enabled | |
| (boolean). | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/device_uuid | |
| Date: June 2017 | |
| KernelVersion: 4.13 | |
| Contact: Johannes Thumshirn <jthumshirn@suse.de> | |
| Description: | |
| Shows or sets the UUID for this namespace. The namespace | |
| must be disabled before modification. | |
| What: /config/nvmet/subsystems/NAME/attr_version | |
| What: /config/nvmet/subsystems/NAME/attr_serial | |
| Date: July 2017 | |
| KernelVersion: 4.13 | |
| Contact: Johannes Thumshirn <jthumshirn@suse.de> | |
| Description: | |
| attr_version: Shows or sets the NVMe version reported by | |
| this subsystem. Format: "major.minor" or | |
| "major.minor.tertiary". Cannot be changed after the | |
| subsystem has been discovered. | |
| attr_serial: Shows or sets the serial number. Must be a | |
| 1-20 byte ASCII string (characters 0x20-0x7e). Cannot be | |
| changed after the subsystem has been discovered. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/ana_grpid | |
| Date: June 2018 | |
| KernelVersion: 4.19 | |
| Contact: Christoph Hellwig <hch@lst.de> | |
| Description: | |
| Shows or sets the ANA (Asymmetric Namespace Access) Group | |
| ID for this namespace. Must be between 1 and 128. Changing | |
| triggers an ANA event notification. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/buffered_io | |
| Date: June 2018 | |
| KernelVersion: 4.19 | |
| Contact: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> | |
| Description: | |
| Shows or sets whether buffered I/O is used for this | |
| namespace. Accepts boolean value. The namespace must be | |
| disabled before modification. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/p2pmem | |
| Date: October 2018 | |
| KernelVersion: 4.20 | |
| Contact: Logan Gunthorpe <logang@deltatee.com> | |
| Description: | |
| Shows or sets the P2P DMA memory device for this namespace. | |
| Accepts a PCI device BDF, "auto", or "none". The namespace | |
| must be disabled before modification. Only available when | |
| CONFIG_PCI_P2PDMA is enabled. | |
| What: /config/nvmet/subsystems/NAME/attr_cntlid_min | |
| What: /config/nvmet/subsystems/NAME/attr_cntlid_max | |
| Date: January 2020 | |
| KernelVersion: 5.7 | |
| Contact: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> | |
| Description: | |
| attr_cntlid_min: Shows or sets the minimum controller ID | |
| (u16). Must be nonzero and not greater than attr_cntlid_max. | |
| attr_cntlid_max: Shows or sets the maximum controller ID | |
| (u16). Must be nonzero and not less than attr_cntlid_min. | |
| What: /config/nvmet/subsystems/NAME/attr_model | |
| Date: January 2020 | |
| KernelVersion: 5.7 | |
| Contact: Mark Ruijter <MRuijter@onestopsystems.com> | |
| Description: | |
| Shows or sets the model number for this subsystem. Must | |
| be a 1-40 byte ASCII string (characters 0x20-0x7e). | |
| Cannot be changed after the subsystem has been discovered. | |
| What: /config/nvmet/subsystems/NAME/attr_pi_enable | |
| Date: May 2020 | |
| KernelVersion: 5.8 | |
| Contact: Israel Rukshin <israelr@mellanox.com> | |
| Description: | |
| Shows or sets whether protection information (PI) is | |
| enabled/supported for this subsystem. Accepts boolean | |
| value. Only available when CONFIG_BLK_DEV_INTEGRITY is | |
| enabled. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/revalidate_size | |
| Date: May 2020 | |
| KernelVersion: 5.8 | |
| Contact: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> | |
| Description: | |
| Write-only. Writing 1 triggers namespace size revalidation. | |
| If the size has changed, a namespace changed AEN is sent. | |
| The namespace must be enabled. | |
| What: /config/nvmet/subsystems/NAME/passthru/device_path | |
| What: /config/nvmet/subsystems/NAME/passthru/enable | |
| Date: July 2020 | |
| KernelVersion: 5.9 | |
| Contact: Logan Gunthorpe <logang@deltatee.com> | |
| Description: | |
| Passthrough mode attributes. | |
| device_path: Shows or sets the NVMe controller character | |
| device path (e.g., /dev/nvme0). Cannot be changed while | |
| the passthrough controller is active. | |
| enable: Shows or sets whether passthrough mode is enabled | |
| (boolean). | |
| Only available when CONFIG_NVME_TARGET_PASSTHRU is enabled. | |
| What: /config/nvmet/subsystems/NAME/passthru/admin_timeout | |
| What: /config/nvmet/subsystems/NAME/passthru/io_timeout | |
| Date: November 2020 | |
| KernelVersion: 5.11 | |
| Contact: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> | |
| Description: | |
| admin_timeout: Shows or sets the admin command timeout for | |
| passthrough mode, in jiffies. | |
| io_timeout: Shows or sets the I/O command timeout for | |
| passthrough mode, in jiffies. | |
| Only available when CONFIG_NVME_TARGET_PASSTHRU is enabled. | |
| What: /config/nvmet/subsystems/NAME/passthru/clear_ids | |
| Date: June 2022 | |
| KernelVersion: 5.19 | |
| Contact: Alan Adamson <alan.adamson@oracle.com> | |
| Description: | |
| Shows or sets whether to clear identify data IDs in | |
| passthrough mode. Only available when | |
| CONFIG_NVME_TARGET_PASSTHRU is enabled. | |
| What: /config/nvmet/subsystems/NAME/attr_qid_max | |
| Date: August 2022 | |
| KernelVersion: 6.1 | |
| Contact: Daniel Wagner <dwagner@suse.de> | |
| Description: | |
| Shows or sets the maximum queue ID (number of I/O queues, | |
| u16). Must be between 1 and 128. Changing this value | |
| forces reconnection of all connected controllers. | |
| What: /config/nvmet/subsystems/NAME/attr_ieee_oui | |
| Date: November 2022 | |
| KernelVersion: 6.2 | |
| Contact: Aleksandr Miloserdov <a.miloserdov@yadro.com> | |
| Description: | |
| Shows or sets the IEEE OUI for this subsystem. Displayed | |
| in "0x%06x" format. Must be a 24-bit value. Cannot be | |
| changed after the subsystem has been discovered. | |
| What: /config/nvmet/subsystems/NAME/attr_firmware | |
| Date: November 2022 | |
| KernelVersion: 6.2 | |
| Contact: Aleksandr Miloserdov <a.miloserdov@yadro.com> | |
| Description: | |
| Shows or sets the firmware revision string for this | |
| subsystem. Must be a 1-8 byte ASCII string (characters | |
| 0x20-0x7e). Cannot be changed after the subsystem has | |
| been discovered. | |
| What: /config/nvmet/subsystems/NAME/namespaces/NSID/resv_enable | |
| Date: November 2024 | |
| KernelVersion: 6.13 | |
| Contact: Guixin Liu <kanie@linux.alibaba.com> | |
| Description: | |
| Shows or sets whether persistent reservation support is | |
| enabled for this namespace. Accepts boolean value. The | |
| namespace must be disabled before modification. | |
| What: /config/nvmet/subsystems/NAME/attr_vendor_id | |
| What: /config/nvmet/subsystems/NAME/attr_subsys_vendor_id | |
| Date: January 2025 | |
| KernelVersion: 6.14 | |
| Contact: Damien Le Moal <dlemoal@kernel.org> | |
| Description: | |
| attr_vendor_id: Shows or sets the PCI vendor ID reported | |
| by this subsystem. Displayed in "0x%x" format. | |
| attr_subsys_vendor_id: Shows or sets the PCI subsystem | |
| vendor ID. Displayed in "0x%x" format. | |
| What: /config/nvmet/hosts/HOSTNQN/dhchap_key | |
| What: /config/nvmet/hosts/HOSTNQN/dhchap_ctrl_key | |
| What: /config/nvmet/hosts/HOSTNQN/dhchap_hash | |
| What: /config/nvmet/hosts/HOSTNQN/dhchap_dhgroup | |
| Date: June 2022 | |
| KernelVersion: 6.0 | |
| Contact: Hannes Reinecke <hare@suse.de> | |
| Description: | |
| DH-HMAC-CHAP authentication attributes. | |
| dhchap_key: Shows or sets the host secret key. Accepts a | |
| key string in "DHHC-1:" format. | |
| dhchap_ctrl_key: Shows or sets the controller secret key | |
| for bidirectional authentication. Same format as dhchap_key. | |
| dhchap_hash: Shows or sets the HMAC hash algorithm. | |
| Accepted values: "hmac(sha256)", "hmac(sha384)", | |
| "hmac(sha512)". | |
| dhchap_dhgroup: Shows or sets the Diffie-Hellman group for | |
| DH-HMAC-CHAP key exchange. Accepted values: "null", | |
| "ffdhe2048", "ffdhe3072", "ffdhe4096", "ffdhe6144". | |
| Non-null groups require the corresponding KPP crypto | |
| algorithm to be available. | |
| Only available when CONFIG_NVME_TARGET_AUTH is enabled. | |
| What: /config/nvmet/discovery_nqn | |
| Date: April 2024 | |
| KernelVersion: 6.9 | |
| Contact: Hannes Reinecke <hare@kernel.org> | |
| Description: | |
| Shows or sets the NQN of the discovery subsystem. The | |
| value must be unique and not duplicate any existing | |
| subsystem name. |