| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # Chemical sensors | |
| # | |
| menu "Chemical Sensors" | |
| config AOSONG_AGS02MA | |
| tristate "Aosong AGS02MA TVOC sensor driver" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| Say Y here to build support for Aosong AGS02MA TVOC (Total Volatile | |
| Organic Compounds) sensor. | |
| To compile this driver as module, choose M here: the module will be | |
| called ags02ma. | |
| config ATLAS_PH_SENSOR | |
| tristate "Atlas Scientific OEM SM sensors" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select IRQ_WORK | |
| help | |
| Say Y here to build I2C interface support for the following | |
| Atlas Scientific OEM SM sensors: | |
| * pH SM sensor | |
| * EC SM sensor | |
| * ORP SM sensor | |
| To compile this driver as module, choose M here: the | |
| module will be called atlas-ph-sensor. | |
| config ATLAS_EZO_SENSOR | |
| tristate "Atlas Scientific EZO sensors" | |
| depends on I2C | |
| help | |
| Say Y here to build I2C interface support for the following | |
| Atlas Scientific EZO sensors | |
| * CO2 EZO Sensor | |
| To compile this driver as module, choose M here: the | |
| module will be called atlas-ezo-sensor. | |
| config BME680 | |
| tristate "Bosch Sensortec BME680 sensor driver" | |
| depends on (I2C || SPI) | |
| select REGMAP | |
| select BME680_I2C if I2C | |
| select BME680_SPI if SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Bosch Sensortec BME680 sensor with | |
| temperature, pressure, humidity and gas sensing capability. | |
| This driver can also be built as a module. If so, the module for I2C | |
| would be called bme680_i2c and bme680_spi for SPI support. | |
| config BME680_I2C | |
| tristate | |
| depends on I2C && BME680 | |
| select REGMAP_I2C | |
| config BME680_SPI | |
| tristate | |
| depends on SPI && BME680 | |
| select REGMAP_SPI | |
| config CCS811 | |
| tristate "AMS CCS811 VOC sensor" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here to build I2C interface support for the AMS | |
| CCS811 VOC (Volatile Organic Compounds) sensor | |
| config ENS160 | |
| tristate "ScioSense ENS160 sensor driver" | |
| depends on (I2C || SPI) | |
| select REGMAP | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select ENS160_I2C if I2C | |
| select ENS160_SPI if SPI | |
| help | |
| Say yes here to build support for ScioSense ENS160 multi-gas sensor. | |
| This driver can also be built as a module. If so, the module for I2C | |
| would be called ens160_i2c and ens160_spi for SPI support. | |
| config ENS160_I2C | |
| tristate | |
| select REGMAP_I2C | |
| config ENS160_SPI | |
| tristate | |
| select REGMAP_SPI | |
| config IAQCORE | |
| tristate "AMS iAQ-Core VOC sensors" | |
| depends on I2C | |
| help | |
| Say Y here to build I2C interface support for the AMS | |
| iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) | |
| sensors | |
| config MHZ19B | |
| tristate "Winsen MHZ19B CO2 sensor" | |
| depends on SERIAL_DEV_BUS | |
| help | |
| Say Y here to build Serdev interface support for the Winsen | |
| MHZ19B CO2 sensor. | |
| To compile this driver as a module, choose M here: the module will | |
| be called mhz19b. | |
| config PMS7003 | |
| tristate "Plantower PMS7003 particulate matter sensor" | |
| depends on SERIAL_DEV_BUS | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here to build support for the Plantower PMS7003 particulate | |
| matter sensor. | |
| To compile this driver as a module, choose M here: the module will | |
| be called pms7003. | |
| config SCD30_CORE | |
| tristate "SCD30 carbon dioxide sensor driver" | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here to build support for the Sensirion SCD30 sensor with carbon | |
| dioxide, relative humidity and temperature sensing capabilities. | |
| To compile this driver as a module, choose M here: the module will | |
| be called scd30_core. | |
| config SCD30_I2C | |
| tristate "SCD30 carbon dioxide sensor I2C driver" | |
| depends on SCD30_CORE && I2C | |
| select CRC8 | |
| help | |
| Say Y here to build support for the Sensirion SCD30 I2C interface | |
| driver. | |
| To compile this driver as a module, choose M here: the module will | |
| be called scd30_i2c. | |
| config SCD30_SERIAL | |
| tristate "SCD30 carbon dioxide sensor serial driver" | |
| depends on SCD30_CORE && SERIAL_DEV_BUS | |
| select CRC16 | |
| help | |
| Say Y here to build support for the Sensirion SCD30 serial interface | |
| driver. | |
| To compile this driver as a module, choose M here: the module will | |
| be called scd30_serial. | |
| config SCD4X | |
| tristate "SCD4X carbon dioxide sensor driver" | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| depends on I2C | |
| select CRC8 | |
| help | |
| Say Y here to build support for the Sensirion SCD4X sensor with carbon | |
| dioxide, relative humidity and temperature sensing capabilities. | |
| To compile this driver as a module, choose M here: the module will | |
| be called scd4x. | |
| config SEN0322 | |
| tristate "SEN0322 oxygen sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y here to build support for the DFRobot SEN0322 oxygen sensor. | |
| To compile this driver as a module, choose M here: the module will | |
| be called sen0322. | |
| config SENSIRION_SGP30 | |
| tristate "Sensirion SGPxx gas sensors" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| Say Y here to build I2C interface support for the following | |
| Sensirion SGP gas sensors: | |
| * SGP30 gas sensor | |
| * SGPC3 low power gas sensor | |
| To compile this driver as module, choose M here: the | |
| module will be called sgp30. | |
| config SENSIRION_SGP40 | |
| tristate "Sensirion SGP40 gas sensor" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| Say Y here to build I2C interface to support Sensirion SGP40 gas | |
| sensor | |
| To compile this driver as module, choose M here: the | |
| module will be called sgp40. | |
| config SPS30 | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config SPS30_I2C | |
| tristate "SPS30 particulate matter sensor I2C driver" | |
| depends on I2C | |
| select SPS30 | |
| select CRC8 | |
| help | |
| Say Y here to build support for the Sensirion SPS30 I2C interface | |
| driver. | |
| To compile this driver as a module, choose M here: the module will | |
| be called sps30_i2c. | |
| config SPS30_SERIAL | |
| tristate "SPS30 particulate matter sensor serial driver" | |
| depends on SERIAL_DEV_BUS | |
| select SPS30 | |
| help | |
| Say Y here to build support for the Sensirion SPS30 serial interface | |
| driver. | |
| To compile this driver as a module, choose M here: the module will | |
| be called sps30_serial. | |
| config SENSEAIR_SUNRISE_CO2 | |
| tristate "Senseair Sunrise 006-0-0007 CO2 sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for Senseair Sunrise 006-0-0007 CO2 | |
| sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sunrise_co2. | |
| config VZ89X | |
| tristate "SGX Sensortech MiCS VZ89X VOC sensor" | |
| depends on I2C | |
| help | |
| Say Y here to build I2C interface support for the SGX | |
| Sensortech MiCS VZ89X VOC (Volatile Organic Compounds) | |
| sensors | |
| endmenu |