blob: 0bcf14640fdedf35886a6eaf5e7a5c1ab8a6469b [file] [log] [blame]
config SND_MPU401_UART
tristate
select SND_RAWMIDI
config SND_OPL3_LIB
tristate
select SND_TIMER
select SND_HWDEP
config SND_OPL4_LIB
tristate
select SND_TIMER
select SND_HWDEP
config SND_VX_LIB
tristate
select SND_HWDEP
select SND_PCM
config SND_AC97_CODEC
tristate
select SND_PCM
select AC97_BUS
select SND_VMASTER
menuconfig SND_DRIVERS
bool "Generic sound devices"
default y
help
Support for generic sound devices.
if SND_DRIVERS
config SND_PCSP
tristate "PC-Speaker support (READ HELP!)"
depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
depends on INPUT
depends on EXPERIMENTAL
select SND_PCM
help
If you don't have a sound card in your computer, you can include a
driver for the PC speaker which allows it to act like a primitive
sound card.
This driver also replaces the pcspkr driver for beeps.
You can compile this as a module which will be called snd-pcsp.
WARNING: if you already have a soundcard, enabling this
driver may lead to a problem. Namely, it may get loaded
before the other sound driver of yours, making the
pc-speaker a default sound device. Which is likely not
what you want. To make this driver play nicely with other
sound driver, you can add this into your /etc/modprobe.conf:
options snd-pcsp index=2
You don't need this driver if you only want your pc-speaker to beep.
You don't need this driver if you have a tablet piezo beeper
in your PC instead of the real speaker.
Say N if you have a sound card.
Say M if you don't.
Say Y only if you really know what you do.
config SND_DUMMY
tristate "Dummy (/dev/null) soundcard"
select SND_PCM
help
Say Y here to include the dummy driver. This driver does
nothing, but emulates various mixer controls and PCM devices.
You don't need this unless you're testing the hardware support
of programs using the ALSA API.
To compile this driver as a module, choose M here: the module
will be called snd-dummy.
config SND_VIRMIDI
tristate "Virtual MIDI soundcard"
depends on SND_SEQUENCER
select SND_TIMER
select SND_RAWMIDI
help
Say Y here to include the virtual MIDI driver. This driver
allows to connect applications using raw MIDI devices to
sequencer clients.
If you don't know what MIDI is, say N here.
To compile this driver as a module, choose M here: the module
will be called snd-virmidi.
config SND_MTPAV
tristate "MOTU MidiTimePiece AV multiport MIDI"
select SND_RAWMIDI
help
To use a MOTU MidiTimePiece AV multiport MIDI adapter
connected to the parallel port, say Y here and make sure that
the standard parallel port driver isn't used for the port.
To compile this driver as a module, choose M here: the module
will be called snd-mtpav.
config SND_MTS64
tristate "ESI Miditerminal 4140 driver"
depends on PARPORT
select SND_RAWMIDI
help
The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with
additional SMPTE Timecode capabilities for the parallel port.
Say 'Y' to include support for this device.
To compile this driver as a module, chose 'M' here: the module
will be called snd-mts64.
config SND_SERIAL_U16550
tristate "UART16550 serial MIDI driver"
select SND_RAWMIDI
help
To include support for MIDI serial port interfaces, say Y here
and read <file:Documentation/sound/alsa/serial-u16550.txt>.
This driver works with serial UARTs 16550 and better.
This driver accesses the serial port hardware directly, so
make sure that the standard serial driver isn't used or
deactivated with setserial before loading this driver.
To compile this driver as a module, choose M here: the module
will be called snd-serial-u16550.
config SND_MPU401
tristate "Generic MPU-401 UART driver"
select SND_MPU401_UART
help
Say Y here to include support for MIDI ports compatible with
the Roland MPU-401 interface in UART mode.
To compile this driver as a module, choose M here: the module
will be called snd-mpu401.
config SND_PORTMAN2X4
tristate "Portman 2x4 driver"
depends on PARPORT
select SND_RAWMIDI
help
Say Y here to include support for Midiman Portman 2x4 parallel
port MIDI device.
To compile this driver as a module, choose M here: the module
will be called snd-portman2x4.
config SND_ML403_AC97CR
tristate "Xilinx ML403 AC97 Controller Reference"
depends on XILINX_VIRTEX
select SND_AC97_CODEC
help
Say Y here to include support for the
opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
reference design.
To compile this driver as a module, choose M here: the module
will be called snd-ml403_ac97cr.
config SND_AC97_POWER_SAVE
bool "AC97 Power-Saving Mode"
depends on SND_AC97_CODEC
default n
help
Say Y here to enable the aggressive power-saving support of
AC97 codecs. In this mode, the power-mode is dynamically
controlled at each open/close.
The mode is activated by passing power_save=1 option to
snd-ac97-codec driver. You can toggle it dynamically over
sysfs, too.
config SND_AC97_POWER_SAVE_DEFAULT
int "Default time-out for AC97 power-save mode"
depends on SND_AC97_POWER_SAVE
default 0
help
The default time-out value in seconds for AC97 automatic
power-save mode. 0 means to disable the power-save mode.
endif # SND_DRIVERS