blob: 499b15fd82f162e788afefba9ec50271f9cf94d0 [file] [log] [blame]
/*
* Fintek F81232 USB to serial adaptor driver
*
* Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
* Copyright (C) 2012 Linux Foundation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1934, 0x0706) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
#define UART_STATE 0x08
#define UART_STATE_TRANSIENT_MASK 0x74
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
#define UART_RING 0x08
#define UART_FRAME_ERROR 0x10
#define UART_PARITY_ERROR 0x20
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
struct f81232_private {
spinlock_t lock;
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
static void f81232_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
{
}
static void f81232_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned int actual_length = urb->actual_length;
int status = urb->status;
int retval;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
__func__, status);
goto exit;
}
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
f81232_update_line_status(port, data, actual_length);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&urb->dev->dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
static void f81232_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct f81232_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
char tty_flag = TTY_NORMAL;
unsigned long flags;
u8 line_status;
int i;
/* update line status */
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
wake_up_interruptible(&priv->delta_msr_wait);
if (!urb->actual_length)
return;
tty = tty_port_tty_get(&port->port);
if (!tty)
return;
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
if (line_status & UART_BREAK_ERROR)
tty_flag = TTY_BREAK;
else if (line_status & UART_PARITY_ERROR)
tty_flag = TTY_PARITY;
else if (line_status & UART_FRAME_ERROR)
tty_flag = TTY_FRAME;
dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
if (port->port.console && port->sysrq) {
for (i = 0; i < urb->actual_length; ++i)
if (!usb_serial_handle_sysrq_char(port, data[i]))
tty_insert_flip_char(tty, data[i], tty_flag);
} else {
tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
urb->actual_length);
}
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
static int set_control_lines(struct usb_device *dev, u8 value)
{
/* FIXME - Stubbed out for now */
return 0;
}
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
/* FIXME - Stubbed out for now */
/*
* break_state = -1 to turn on break, and 0 to turn off break
* see drivers/char/tty_io.c to see it used.
* last_set_data_urb_value NEVER has the break bit set in it.
*/
}
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
/* FIXME - Stubbed out for now */
/* Don't change anything if nothing has changed */
if (!tty_termios_hw_change(tty->termios, old_termios))
return;
/* Do the real work here... */
}
static int f81232_tiocmget(struct tty_struct *tty)
{
/* FIXME - Stubbed out for now */
return 0;
}
static int f81232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
/* FIXME - Stubbed out for now */
return 0;
}
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
int result;
/* Setup termios */
if (tty)
f81232_set_termios(tty, port, &tmp_termios);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
" error %d\n", __func__, result);
return result;
}
result = usb_serial_generic_open(tty, port);
if (result) {
usb_kill_urb(port->interrupt_in_urb);
return result;
}
port->port.drain_delay = 256;
return 0;
}
static void f81232_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
}
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
/* Change DTR and RTS */
if (on)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
else
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
set_control_lines(port->serial->dev, control);
}
static int f81232_carrier_raised(struct usb_serial_port *port)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
if (priv->line_status & UART_DCD)
return 1;
return 0;
}
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int prevstatus;
unsigned int status;
unsigned int changed;
spin_lock_irqsave(&priv->lock, flags);
prevstatus = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
changed = prevstatus ^ status;
if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
((arg & TIOCM_CD) && (changed & UART_DCD)) ||
((arg & TIOCM_CTS) && (changed & UART_CTS))) {
return 0;
}
prevstatus = status;
}
/* NOTREACHED */
return 0;
}
static int f81232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
port->number, cmd);
switch (cmd) {
case TIOCGSERIAL:
memset(&ser, 0, sizeof ser);
ser.type = PORT_16654;
ser.line = port->serial->minor;
ser.port = port->number;
ser.baud_base = 460800;
if (copy_to_user((void __user *)arg, &ser, sizeof ser))
return -EFAULT;
return 0;
case TIOCMIWAIT:
dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
port->number);
return wait_modem_info(port, arg);
default:
dev_dbg(&port->dev, "%s not supported = 0x%04x\n",
__func__, cmd);
break;
}
return -ENOIOCTLCMD;
}
static int f81232_startup(struct usb_serial *serial)
{
struct f81232_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
if (!priv)
goto cleanup;
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(serial->port[i], priv);
}
return 0;
cleanup:
for (--i; i >= 0; --i) {
priv = usb_get_serial_port_data(serial->port[i]);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
return -ENOMEM;
}
static void f81232_release(struct usb_serial *serial)
{
int i;
struct f81232_private *priv;
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
kfree(priv);
}
}
static struct usb_serial_driver f81232_device = {
.driver = {
.owner = THIS_MODULE,
.name = "f81232",
},
.id_table = id_table,
.num_ports = 1,
.bulk_in_size = 256,
.bulk_out_size = 256,
.open = f81232_open,
.close = f81232_close,
.dtr_rts = f81232_dtr_rts,
.carrier_raised = f81232_carrier_raised,
.ioctl = f81232_ioctl,
.break_ctl = f81232_break_ctl,
.set_termios = f81232_set_termios,
.tiocmget = f81232_tiocmget,
.tiocmset = f81232_tiocmset,
.process_read_urb = f81232_process_read_urb,
.read_int_callback = f81232_read_int_callback,
.attach = f81232_startup,
.release = f81232_release,
};
static struct usb_serial_driver * const serial_drivers[] = {
&f81232_device,
NULL,
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
MODULE_LICENSE("GPL v2");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");