Merge tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Fix a regression for wrong interrupt numbers for some devices after
the sparse IRQ conversion, fix DRA7 console output for earlyprintk,
and fix the LDP LCD backlight when DSS is built into the kernel and
not as a loadable module.
* tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
+ v3.13-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 46e1d7e..9987dd0e 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -241,7 +241,7 @@
sdhi0: sdhi@ee100000 {
compatible = "renesas,sdhi-r8a7790";
- reg = <0 0xee100000 0 0x100>;
+ reg = <0 0xee100000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
@@ -250,7 +250,7 @@
sdhi1: sdhi@ee120000 {
compatible = "renesas,sdhi-r8a7790";
- reg = <0 0xee120000 0 0x100>;
+ reg = <0 0xee120000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 2a086e8..958cd6af 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#include <mach/irqs.h>
+
#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS
#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 958e3cb..c186891 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -614,6 +614,11 @@
REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
};
+/* Fixed 3.3V regulator used by LCD backlight */
+static struct regulator_consumer_supply fixed5v0_power_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight.0"),
+};
+
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply vcc_sdhi0_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
@@ -1196,6 +1201,8 @@
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
+ ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 38611526..3c4995a 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -679,7 +679,7 @@
.id = i,
.data = &rsnd_card_info[i],
.size_data = sizeof(struct asoc_simple_card_info),
- .dma_mask = ~0,
+ .dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&cardinfo);
