| .. _transhuge: |
| |
| ============================ |
| Transparent Hugepage Support |
| ============================ |
| |
| This document describes design principles for Transparent Hugepage (THP) |
| support and its interaction with other parts of the memory management |
| system. |
| |
| Design principles |
| ================= |
| |
| - "graceful fallback": mm components which don't have transparent hugepage |
| knowledge fall back to breaking huge pmd mapping into table of ptes and, |
| if necessary, split a transparent hugepage. Therefore these components |
| can continue working on the regular pages or regular pte mappings. |
| |
| - if a hugepage allocation fails because of memory fragmentation, |
| regular pages should be gracefully allocated instead and mixed in |
| the same vma without any failure or significant delay and without |
| userland noticing |
| |
| - if some task quits and more hugepages become available (either |
| immediately in the buddy or through the VM), guest physical memory |
| backed by regular pages should be relocated on hugepages |
| automatically (with khugepaged) |
| |
| - it doesn't require memory reservation and in turn it uses hugepages |
| whenever possible (the only possible reservation here is kernelcore= |
| to avoid unmovable pages to fragment all the memory but such a tweak |
| is not specific to transparent hugepage support and it's a generic |
| feature that applies to all dynamic high order allocations in the |
| kernel) |
| |
| get_user_pages and follow_page |
| ============================== |
| |
| get_user_pages and follow_page if run on a hugepage, will return the |
| head or tail pages as usual (exactly as they would do on |
| hugetlbfs). Most GUP users will only care about the actual physical |
| address of the page and its temporary pinning to release after the I/O |
| is complete, so they won't ever notice the fact the page is huge. But |
| if any driver is going to mangle over the page structure of the tail |
| page (like for checking page->mapping or other bits that are relevant |
| for the head page and not the tail page), it should be updated to jump |
| to check head page instead. Taking a reference on any head/tail page would |
| prevent the page from being split by anyone. |
| |
| .. note:: |
| these aren't new constraints to the GUP API, and they match the |
| same constraints that apply to hugetlbfs too, so any driver capable |
| of handling GUP on hugetlbfs will also work fine on transparent |
| hugepage backed mappings. |
| |
| In case you can't handle compound pages if they're returned by |
| follow_page, the FOLL_SPLIT bit can be specified as a parameter to |
| follow_page, so that it will split the hugepages before returning |
| them. |
| |
| Graceful fallback |
| ================= |
| |
| Code walking pagetables but unaware about huge pmds can simply call |
| split_huge_pmd(vma, pmd, addr) where the pmd is the one returned by |
| pmd_offset. It's trivial to make the code transparent hugepage aware |
| by just grepping for "pmd_offset" and adding split_huge_pmd where |
| missing after pmd_offset returns the pmd. Thanks to the graceful |
| fallback design, with a one liner change, you can avoid to write |
| hundreds if not thousands of lines of complex code to make your code |
| hugepage aware. |
| |
| If you're not walking pagetables but you run into a physical hugepage |
| that you can't handle natively in your code, you can split it by |
| calling split_huge_page(page). This is what the Linux VM does before |
| it tries to swapout the hugepage for example. split_huge_page() can fail |
| if the page is pinned and you must handle this correctly. |
| |
| Example to make mremap.c transparent hugepage aware with a one liner |
| change:: |
| |
| diff --git a/mm/mremap.c b/mm/mremap.c |
| --- a/mm/mremap.c |
| +++ b/mm/mremap.c |
| @@ -41,6 +41,7 @@ static pmd_t *get_old_pmd(struct mm_stru |
| return NULL; |
| |
| pmd = pmd_offset(pud, addr); |
| + split_huge_pmd(vma, pmd, addr); |
| if (pmd_none_or_clear_bad(pmd)) |
| return NULL; |
| |
| Locking in hugepage aware code |
| ============================== |
| |
| We want as much code as possible hugepage aware, as calling |
| split_huge_page() or split_huge_pmd() has a cost. |
| |
| To make pagetable walks huge pmd aware, all you need to do is to call |
| pmd_trans_huge() on the pmd returned by pmd_offset. You must hold the |
| mmap_sem in read (or write) mode to be sure a huge pmd cannot be |
| created from under you by khugepaged (khugepaged collapse_huge_page |
| takes the mmap_sem in write mode in addition to the anon_vma lock). If |
| pmd_trans_huge returns false, you just fallback in the old code |
| paths. If instead pmd_trans_huge returns true, you have to take the |
| page table lock (pmd_lock()) and re-run pmd_trans_huge. Taking the |
| page table lock will prevent the huge pmd being converted into a |
| regular pmd from under you (split_huge_pmd can run in parallel to the |
| pagetable walk). If the second pmd_trans_huge returns false, you |
| should just drop the page table lock and fallback to the old code as |
| before. Otherwise, you can proceed to process the huge pmd and the |
| hugepage natively. Once finished, you can drop the page table lock. |
| |
| Refcounts and transparent huge pages |
| ==================================== |
| |
| Refcounting on THP is mostly consistent with refcounting on other compound |
| pages: |
| |
| - get_page()/put_page() and GUP operate on head page's ->_refcount. |
| |
| - ->_refcount in tail pages is always zero: get_page_unless_zero() never |
| succeeds on tail pages. |
| |
| - map/unmap of the pages with PTE entry increment/decrement ->_mapcount |
| on relevant sub-page of the compound page. |
| |
| - map/unmap of the whole compound page is accounted for in compound_mapcount |
| (stored in first tail page). For file huge pages, we also increment |
| ->_mapcount of all sub-pages in order to have race-free detection of |
| last unmap of subpages. |
| |
| PageDoubleMap() indicates that the page is *possibly* mapped with PTEs. |
| |
| For anonymous pages, PageDoubleMap() also indicates ->_mapcount in all |
| subpages is offset up by one. This additional reference is required to |
| get race-free detection of unmap of subpages when we have them mapped with |
| both PMDs and PTEs. |
| |
| This optimization is required to lower the overhead of per-subpage mapcount |
| tracking. The alternative is to alter ->_mapcount in all subpages on each |
| map/unmap of the whole compound page. |
| |
| For anonymous pages, we set PG_double_map when a PMD of the page is split |
| for the first time, but still have a PMD mapping. The additional references |
| go away with the last compound_mapcount. |
| |
| File pages get PG_double_map set on the first map of the page with PTE and |
| goes away when the page gets evicted from the page cache. |
| |
| split_huge_page internally has to distribute the refcounts in the head |
| page to the tail pages before clearing all PG_head/tail bits from the page |
| structures. It can be done easily for refcounts taken by page table |
| entries, but we don't have enough information on how to distribute any |
| additional pins (i.e. from get_user_pages). split_huge_page() fails any |
| requests to split pinned huge pages: it expects page count to be equal to |
| the sum of mapcount of all sub-pages plus one (split_huge_page caller must |
| have a reference to the head page). |
| |
| split_huge_page uses migration entries to stabilize page->_refcount and |
| page->_mapcount of anonymous pages. File pages just get unmapped. |
| |
| We are safe against physical memory scanners too: the only legitimate way |
| a scanner can get a reference to a page is get_page_unless_zero(). |
| |
| All tail pages have zero ->_refcount until atomic_add(). This prevents the |
| scanner from getting a reference to the tail page up to that point. After the |
| atomic_add() we don't care about the ->_refcount value. We already know how |
| many references should be uncharged from the head page. |
| |
| For head page get_page_unless_zero() will succeed and we don't mind. It's |
| clear where references should go after split: it will stay on the head page. |
| |
| Note that split_huge_pmd() doesn't have any limitations on refcounting: |
| pmd can be split at any point and never fails. |
| |
| Partial unmap and deferred_split_huge_page() |
| ============================================ |
| |
| Unmapping part of THP (with munmap() or other way) is not going to free |
| memory immediately. Instead, we detect that a subpage of THP is not in use |
| in page_remove_rmap() and queue the THP for splitting if memory pressure |
| comes. Splitting will free up unused subpages. |
| |
| Splitting the page right away is not an option due to locking context in |
| the place where we can detect partial unmap. It also might be |
| counterproductive since in many cases partial unmap happens during exit(2) if |
| a THP crosses a VMA boundary. |
| |
| The function deferred_split_huge_page() is used to queue a page for splitting. |
| The splitting itself will happen when we get memory pressure via shrinker |
| interface. |