Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Fix min function comparison warning
ecryptfs: fix printk format warning
diff --git a/drivers/Makefile b/drivers/Makefile
index 2618a61..1266ead 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -36,7 +36,7 @@
obj-y += serial/
obj-$(CONFIG_PARPORT) += parport/
-obj-y += base/ block/ misc/ mfd/ media/
+obj-y += base/ block/ misc/ mfd/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
@@ -71,7 +71,7 @@
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_RTC_LIB) += rtc/
-obj-y += i2c/
+obj-y += i2c/ media/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index 4cee0b9..a1e4c0d 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -192,8 +192,6 @@
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
- usb_set_intfdata(interface, dev);
-
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
@@ -222,6 +220,10 @@
/* Digital TV */
au0828_dvb_register(dev);
+ /* Store the pointer to the au0828_dev so it can be accessed in
+ au0828_usb_disconnect */
+ usb_set_intfdata(interface, dev);
+
printk(KERN_INFO "Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c
index 1519e91..7a8ad59 100644
--- a/drivers/media/video/cx18/cx18-audio.c
+++ b/drivers/media/video/cx18/cx18-audio.c
@@ -44,7 +44,7 @@
/* handle muxer chips */
v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
- in->audio_input, 0, 0);
+ (u32) in->muxer_input, 0, 0);
err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
audio, s_routing, in->audio_input, 0, 0);
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index b9b7064..8591e4f 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -211,7 +211,7 @@
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
- int i;
+ int i, err;
CX18_DEBUG_I2C("i2c init\n");
for (i = 0; i < 2; i++) {
@@ -268,8 +268,18 @@
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
- return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
- i2c_bit_add_bus(&cx->i2c_adap[1]);
+ err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+ if (err)
+ goto err;
+ err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+ if (err)
+ goto err_del_bus_0;
+ return 0;
+
+ err_del_bus_0:
+ i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+ return err;
}
void exit_cx18_i2c(struct cx18 *cx)
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index 9115654..477d4ab 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -1,12 +1,11 @@
config VIDEO_CX231XX
- tristate "Conexant cx231xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_IR
- select VIDEOBUF_VMALLOC
- select VIDEO_CX25840
- select VIDEO_CX231XX_ALSA
+ tristate "Conexant cx231xx USB video capture support"
+ depends on VIDEO_DEV && I2C && INPUT
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_VMALLOC
+ select VIDEO_CX25840
---help---
This is a video4linux driver for Conexant 231xx USB based TV cards.
@@ -15,21 +14,22 @@
module will be called cx231xx
config VIDEO_CX231XX_ALSA
- tristate "Conexant Cx231xx ALSA audio module"
- depends on VIDEO_CX231XX && SND
- select SND_PCM
+ tristate "Conexant Cx231xx ALSA audio module"
+ depends on VIDEO_CX231XX && SND
+ select SND_PCM
- ---help---
- This is an ALSA driver for Cx231xx USB based TV cards.
+ ---help---
+ This is an ALSA driver for Cx231xx USB based TV cards.
- To compile this driver as a module, choose M here: the
- module will be called cx231xx-alsa
+ To compile this driver as a module, choose M here: the
+ module will be called cx231xx-alsa
config VIDEO_CX231XX_DVB
- tristate "DVB/ATSC Support for Cx231xx based TV cards"
- depends on VIDEO_CX231XX && DVB_CORE
- select VIDEOBUF_DVB
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
- ---help---
- This adds support for DVB cards based on the
- Conexant cx231xx chips.
+ tristate "DVB/ATSC Support for Cx231xx based TV cards"
+ depends on VIDEO_CX231XX && DVB_CORE
+ select VIDEOBUF_DVB
+ select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
+ ---help---
+ This adds support for DVB cards based on the
+ Conexant cx231xx chips.
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index a3c0565..6d6293f 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -441,9 +441,9 @@
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
- if (port->nr == 0)
+ if (port->nr == 1)
bitmask = 0x01;
- else if (port->nr == 1)
+ else if (port->nr == 2)
bitmask = 0x04;
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index f48454a..0c49a98 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -314,6 +314,7 @@
.demod_address = 0x0f,
.if2 = 45600,
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct stv0900_config netup_stv0900_config = {
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c462b81..2d07811 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -1063,10 +1063,6 @@
.owner = THIS_MODULE,
.add = mx3_camera_add_device,
.remove = mx3_camera_remove_device,
-#ifdef CONFIG_PM
- .suspend = mx3_camera_suspend,
- .resume = mx3_camera_resume,
-#endif
.set_crop = mx3_camera_set_crop,
.set_fmt = mx3_camera_set_fmt,
.try_fmt = mx3_camera_try_fmt,
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5202cad..30f4698 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -1237,6 +1237,7 @@
buffer[1] = (u32) chn_rev;
buffer[2] = CMD_SET_MODE;
memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+ dev->setmode_ready[chn] = 0;
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
if (debug)
dump_verify_mode(dev, mode);
@@ -1245,7 +1246,6 @@
/* wait at least 3 frames before continuing */
if (mode->restart) {
- dev->setmode_ready[chn] = 0;
wait_event_timeout(dev->wait_setmode[chn],
(dev->setmode_ready[chn] != 0),
msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index da47b2f..155804b 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -1092,9 +1092,8 @@
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 48b27fe..271d6e9 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -598,6 +598,7 @@
/* Now create a video4linux device */
t->vdev = video_device_alloc();
if (t->vdev == NULL) {
+ kfree(t);
kfree(client);
return -ENOMEM;
}
@@ -617,9 +618,8 @@
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
