| /***************************************************************************** |
| * |
| * ESS Maestro/Maestro-2/Maestro-2E driver for Linux 2.[23].x |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * (c) Copyright 1999 Alan Cox <alan.cox@linux.org> |
| * |
| * Based heavily on SonicVibes.c: |
| * Copyright (C) 1998-1999 Thomas Sailer (sailer@ife.ee.ethz.ch) |
| * |
| * Heavily modified by Zach Brown <zab@zabbo.net> based on lunch |
| * with ESS engineers. Many thanks to Howard Kim for providing |
| * contacts and hardware. Honorable mention goes to Eric |
| * Brombaugh for all sorts of things. Best regards to the |
| * proprietors of Hack Central for fine lodging. |
| * |
| * Supported devices: |
| * /dev/dsp0-3 standard /dev/dsp device, (mostly) OSS compatible |
| * /dev/mixer standard /dev/mixer device, (mostly) OSS compatible |
| * |
| * Hardware Description |
| * |
| * A working Maestro setup contains the Maestro chip wired to a |
| * codec or 2. In the Maestro we have the APUs, the ASSP, and the |
| * Wavecache. The APUs can be though of as virtual audio routing |
| * channels. They can take data from a number of sources and perform |
| * basic encodings of the data. The wavecache is a storehouse for |
| * PCM data. Typically it deals with PCI and interracts with the |
| * APUs. The ASSP is a wacky DSP like device that ESS is loth |
| * to release docs on. Thankfully it isn't required on the Maestro |
| * until you start doing insane things like FM emulation and surround |
| * encoding. The codecs are almost always AC-97 compliant codecs, |
| * but it appears that early Maestros may have had PT101 (an ESS |
| * part?) wired to them. The only real difference in the Maestro |
| * families is external goop like docking capability, memory for |
| * the ASSP, and initialization differences. |
| * |
| * Driver Operation |
| * |
| * We only drive the APU/Wavecache as typical DACs and drive the |
| * mixers in the codecs. There are 64 APUs. We assign 6 to each |
| * /dev/dsp? device. 2 channels for output, and 4 channels for |
| * input. |
| * |
| * Each APU can do a number of things, but we only really use |
| * 3 basic functions. For playback we use them to convert PCM |
| * data fetched over PCI by the wavecahche into analog data that |
| * is handed to the codec. One APU for mono, and a pair for stereo. |
| * When in stereo, the combination of smarts in the APU and Wavecache |
| * decide which wavecache gets the left or right channel. |
| * |
| * For record we still use the old overly mono system. For each in |
| * coming channel the data comes in from the codec, through a 'input' |
| * APU, through another rate converter APU, and then into memory via |
| * the wavecache and PCI. If its stereo, we mash it back into LRLR in |
| * software. The pass between the 2 APUs is supposedly what requires us |
| * to have a 512 byte buffer sitting around in wavecache/memory. |
| * |
| * The wavecache makes our life even more fun. First off, it can |
| * only address the first 28 bits of PCI address space, making it |
| * useless on quite a few architectures. Secondly, its insane. |
| * It claims to fetch from 4 regions of PCI space, each 4 meg in length. |
| * But that doesn't really work. You can only use 1 region. So all our |
| * allocations have to be in 4meg of each other. Booo. Hiss. |
| * So we have a module parameter, dsps_order, that is the order of |
| * the number of dsps to provide. All their buffer space is allocated |
| * on open time. The sonicvibes OSS routines we inherited really want |
| * power of 2 buffers, so we have all those next to each other, then |
| * 512 byte regions for the recording wavecaches. This ends up |
| * wasting quite a bit of memory. The only fixes I can see would be |
| * getting a kernel allocator that could work in zones, or figuring out |
| * just how to coerce the WP into doing what we want. |
| * |
| * The indirection of the various registers means we have to spinlock |
| * nearly all register accesses. We have the main register indirection |
| * like the wave cache, maestro registers, etc. Then we have beasts |
| * like the APU interface that is indirect registers gotten at through |
| * the main maestro indirection. Ouch. We spinlock around the actual |
| * ports on a per card basis. This means spinlock activity at each IO |
| * operation, but the only IO operation clusters are in non critical |
| * paths and it makes the code far easier to follow. Interrupts are |
| * blocked while holding the locks because the int handler has to |
| * get at some of them :(. The mixer interface doesn't, however. |
| * We also have an OSS state lock that is thrown around in a few |
| * places. |
| * |
| * This driver has brute force APM suspend support. We catch suspend |
| * notifications and stop all work being done on the chip. Any people |
| * that try between this shutdown and the real suspend operation will |
| * be put to sleep. When we resume we restore our software state on |
| * the chip and wake up the people that were using it. The code thats |
| * being used now is quite dirty and assumes we're on a uni-processor |
| * machine. Much of it will need to be cleaned up for SMP ACPI or |
| * similar. |
| * |
| * We also pay attention to PCI power management now. The driver |
| * will power down units of the chip that it knows aren't needed. |
| * The WaveProcessor and company are only powered on when people |
| * have /dev/dsp*s open. On removal the driver will |
| * power down the maestro entirely. There could still be |
| * trouble with BIOSen that magically change power states |
| * themselves, but we'll see. |
| * |
| * History |
| * v0.15 - May 21 2001 - Marcus Meissner <mm@caldera.de> |
| * Ported to Linux 2.4 PCI API. Some clean ups, global devs list |
| * removed (now using pci device driver data). |
| * PM needs to be polished still. Bumped version. |
| * (still kind of v0.14) May 13 2001 - Ben Pfaff <pfaffben@msu.edu> |
| * Add support for 978 docking and basic hardware volume control |
| * (still kind of v0.14) Nov 23 - Alan Cox <alan@redhat.com> |
| * Add clocking= for people with seriously warped hardware |
| * (still v0.14) Nov 10 2000 - Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> |
| * add __init to maestro_ac97_init() and maestro_install() |
| * (still based on v0.14) Mar 29 2000 - Zach Brown <zab@redhat.com> |
| * move to 2.3 power management interface, which |
| * required hacking some suspend/resume/check paths |
| * make static compilation work |
| * v0.14 - Jan 28 2000 - Zach Brown <zab@redhat.com> |
| * add PCI power management through ACPI regs. |
| * we now shut down on machine reboot/halt |
| * leave scary PCI config items alone (isa stuff, mostly) |
| * enable 1921s, it seems only mine was broke. |
| * fix swapped left/right pcm dac. har har. |
| * up bob freq, increase buffers, fix pointers at underflow |
| * silly compilation problems |
| * v0.13 - Nov 18 1999 - Zach Brown <zab@redhat.com> |
| * fix nec Versas? man would that be cool. |
| * v0.12 - Nov 12 1999 - Zach Brown <zab@redhat.com> |
| * brown bag volume max fix.. |
| * v0.11 - Nov 11 1999 - Zach Brown <zab@redhat.com> |
| * use proper stereo apu decoding, mmap/write should work. |
| * make volume sliders more useful, tweak rate calculation. |
| * fix lame 8bit format reporting bug. duh. apm apu saving buglet also |
| * fix maestro 1 clock freq "bug", remove pt101 support |
| * v0.10 - Oct 28 1999 - Zach Brown <zab@redhat.com> |
| * aha, so, sometimes the WP writes a status word to offset 0 |
| * from one of the PCMBARs. rearrange allocation accordingly.. |
| * cheers again to Eric for being a good hacker in investigating this. |
| * Jeroen Hoogervorst submits 7500 fix out of nowhere. yay. :) |
| * v0.09 - Oct 23 1999 - Zach Brown <zab@redhat.com> |
| * added APM support. |
| * re-order something such that some 2Es now work. Magic! |
| * new codec reset routine. made some codecs come to life. |
| * fix clear_advance, sync some control with ESS. |
| * now write to all base regs to be paranoid. |
| * v0.08 - Oct 20 1999 - Zach Brown <zab@redhat.com> |
| * Fix initial buflen bug. I am so smart. also smp compiling.. |
| * I owe Eric yet another beer: fixed recmask, igain, |
| * muting, and adc sync consistency. Go Team. |
| * v0.07 - Oct 4 1999 - Zach Brown <zab@redhat.com> |
| * tweak adc/dac, formating, and stuff to allow full duplex |
| * allocate dsps memory at open() so we can fit in the wavecache window |
| * fix wavecache braindamage. again. no more scribbling? |
| * fix ess 1921 codec bug on some laptops. |
| * fix dumb pci scanning bug |
| * started 2.3 cleanup, redid spinlocks, little cleanups |
| * v0.06 - Sep 20 1999 - Zach Brown <zab@redhat.com> |
| * fix wavecache thinkos. limit to 1 /dev/dsp. |
| * eric is wearing his thinking toque this week. |
| * spotted apu mode bugs and gain ramping problem |
| * don't touch weird mixer regs, make recmask optional |
| * fixed igain inversion, defaults for mixers, clean up rec_start |
| * make mono recording work. |
| * report subsystem stuff, please send reports. |
| * littles: parallel out, amp now |
| * v0.05 - Sep 17 1999 - Zach Brown <zab@redhat.com> |
| * merged and fixed up Eric's initial recording code |
| * munged format handling to catch misuse, needs rewrite. |
| * revert ring bus init, fixup shared int, add pci busmaster setting |
| * fix mixer oss interface, fix mic mute and recmask |
| * mask off unsupported mixers, reset with all 1s, modularize defaults |
| * make sure bob is running while we need it |
| * got rid of device limit, initial minimal apm hooks |
| * pull out dead code/includes, only allow multimedia/audio maestros |
| * v0.04 - Sep 01 1999 - Zach Brown <zab@redhat.com> |
| * copied memory leak fix from sonicvibes driver |
| * different ac97 reset, play with 2.0 ac97, simplify ring bus setup |
| * bob freq code, region sanity, jitter sync fix; all from Eric |
| * |
| * TODO |
| * fix bob frequency |
| * endianness |
| * do smart things with ac97 2.0 bits. |
| * dual codecs |
| * leave 54->61 open |
| * |
| * it also would be fun to have a mode that would not use pci dma at all |
| * but would copy into the wavecache on board memory and use that |
| * on architectures that don't like the maestro's pci dma ickiness. |
| */ |
| |
| /*****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/smp_lock.h> |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/sound.h> |
| #include <linux/slab.h> |
| #include <linux/soundcard.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/poll.h> |
| #include <linux/reboot.h> |
| #include <linux/bitops.h> |
| #include <linux/wait.h> |
| |
| #include <asm/current.h> |
| #include <asm/dma.h> |
| #include <asm/io.h> |
| #include <asm/page.h> |
| #include <asm/uaccess.h> |
| |
| #include <linux/pm.h> |
| static int maestro_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *d); |
| |
| #include "maestro.h" |
| |
| static struct pci_driver maestro_pci_driver; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| #define M_DEBUG 1 |
| |
| #ifdef M_DEBUG |
| static int debug; |
| #define M_printk(args...) {if (debug) printk(args);} |
| #else |
| #define M_printk(x) |
| #endif |
| |
| /* we try to setup 2^(dsps_order) /dev/dsp devices */ |
| static int dsps_order; |
| /* whether or not we mess around with power management */ |
| static int use_pm=2; /* set to 1 for force */ |
| /* clocking for broken hardware - a few laptops seem to use a 50Khz clock |
| ie insmod with clocking=50000 or so */ |
| |
| static int clocking=48000; |
| |
| MODULE_AUTHOR("Zach Brown <zab@zabbo.net>, Alan Cox <alan@redhat.com>"); |
| MODULE_DESCRIPTION("ESS Maestro Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #ifdef M_DEBUG |
| module_param(debug, bool, 0644); |
| #endif |
| module_param(dsps_order, int, 0); |
| module_param(use_pm, int, 0); |
| module_param(clocking, int, 0); |
| |
| /* --------------------------------------------------------------------- */ |
| #define DRIVER_VERSION "0.15" |
| |
| #ifndef PCI_VENDOR_ESS |
| #define PCI_VENDOR_ESS 0x125D |
| #define PCI_DEVICE_ID_ESS_ESS1968 0x1968 /* Maestro 2 */ |
| #define PCI_DEVICE_ID_ESS_ESS1978 0x1978 /* Maestro 2E */ |
| |
| #define PCI_VENDOR_ESS_OLD 0x1285 /* Platform Tech, |
| the people the maestro |
| was bought from */ |
| #define PCI_DEVICE_ID_ESS_ESS0100 0x0100 /* maestro 1 */ |
| #endif /* PCI_VENDOR_ESS */ |
| |
| #define ESS_CHAN_HARD 0x100 |
| |
| /* NEC Versas ? */ |
| #define NEC_VERSA_SUBID1 0x80581033 |
| #define NEC_VERSA_SUBID2 0x803c1033 |
| |
| |
| /* changed so that I could actually find all the |
| references and fix them up. it's a little more readable now. */ |
| #define ESS_FMT_STEREO 0x01 |
| #define ESS_FMT_16BIT 0x02 |
| #define ESS_FMT_MASK 0x03 |
| #define ESS_DAC_SHIFT 0 |
| #define ESS_ADC_SHIFT 4 |
| |
| #define ESS_STATE_MAGIC 0x125D1968 |
| #define ESS_CARD_MAGIC 0x19283746 |
| |
| #define DAC_RUNNING 1 |
| #define ADC_RUNNING 2 |
| |
| #define MAX_DSP_ORDER 2 |
| #define MAX_DSPS (1<<MAX_DSP_ORDER) |
| #define NR_DSPS (1<<dsps_order) |
| #define NR_IDRS 32 |
| |
| #define NR_APUS 64 |
| #define NR_APU_REGS 16 |
| |
| /* acpi states */ |
| enum { |
| ACPI_D0=0, |
| ACPI_D1, |
| ACPI_D2, |
| ACPI_D3 |
| }; |
| |
| /* bits in the acpi masks */ |
| #define ACPI_12MHZ ( 1 << 15) |
| #define ACPI_24MHZ ( 1 << 14) |
| #define ACPI_978 ( 1 << 13) |
| #define ACPI_SPDIF ( 1 << 12) |
| #define ACPI_GLUE ( 1 << 11) |
| #define ACPI__10 ( 1 << 10) /* reserved */ |
| #define ACPI_PCIINT ( 1 << 9) |
| #define ACPI_HV ( 1 << 8) /* hardware volume */ |
| #define ACPI_GPIO ( 1 << 7) |
| #define ACPI_ASSP ( 1 << 6) |
| #define ACPI_SB ( 1 << 5) /* sb emul */ |
| #define ACPI_FM ( 1 << 4) /* fm emul */ |
| #define ACPI_RB ( 1 << 3) /* ringbus / aclink */ |
| #define ACPI_MIDI ( 1 << 2) |
| #define ACPI_GP ( 1 << 1) /* game port */ |
| #define ACPI_WP ( 1 << 0) /* wave processor */ |
| |
| #define ACPI_ALL (0xffff) |
| #define ACPI_SLEEP (~(ACPI_SPDIF|ACPI_ASSP|ACPI_SB|ACPI_FM| \ |
| ACPI_MIDI|ACPI_GP|ACPI_WP)) |
| #define ACPI_NONE (ACPI__10) |
| |
| /* these masks indicate which units we care about at |
| which states */ |
| static u16 acpi_state_mask[] = { |
| [ACPI_D0] = ACPI_ALL, |
| [ACPI_D1] = ACPI_SLEEP, |
| [ACPI_D2] = ACPI_SLEEP, |
| [ACPI_D3] = ACPI_NONE |
| }; |
| |
| static char version[] __devinitdata = |
| KERN_INFO "maestro: version " DRIVER_VERSION " time " __TIME__ " " __DATE__ "\n"; |
| |
| |
| |
| static const unsigned sample_size[] = { 1, 2, 2, 4 }; |
| static const unsigned sample_shift[] = { 0, 1, 1, 2 }; |
| |
| enum card_types_t { |
| TYPE_MAESTRO, |
| TYPE_MAESTRO2, |
| TYPE_MAESTRO2E |
| }; |
| |
| static const char *card_names[]={ |
| [TYPE_MAESTRO] = "ESS Maestro", |
| [TYPE_MAESTRO2] = "ESS Maestro 2", |
| [TYPE_MAESTRO2E] = "ESS Maestro 2E" |
| }; |
| |
| static int clock_freq[]={ |
| [TYPE_MAESTRO] = (49152000L / 1024L), |
| [TYPE_MAESTRO2] = (50000000L / 1024L), |
| [TYPE_MAESTRO2E] = (50000000L / 1024L) |
| }; |
| |
| static int maestro_notifier(struct notifier_block *nb, unsigned long event, void *buf); |
| |
| static struct notifier_block maestro_nb = {maestro_notifier, NULL, 0}; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| struct ess_state { |
| unsigned int magic; |
| /* FIXME: we probably want submixers in here, but only one record pair */ |
| u8 apu[6]; /* l/r output, l/r intput converters, l/r input apus */ |
| u8 apu_mode[6]; /* Running mode for this APU */ |
| u8 apu_pan[6]; /* Panning setup for this APU */ |
| u32 apu_base[6]; /* base address for this apu */ |
| struct ess_card *card; /* Card info */ |
| /* wave stuff */ |
| unsigned int rateadc, ratedac; |
| unsigned char fmt, enable; |
| |
| int index; |
| |
| /* this locks around the oss state in the driver */ |
| spinlock_t lock; |
| /* only let 1 be opening at a time */ |
| struct semaphore open_sem; |
| wait_queue_head_t open_wait; |
| mode_t open_mode; |
| |
| /* soundcore stuff */ |
| int dev_audio; |
| |
| struct dmabuf { |
| void *rawbuf; |
| unsigned buforder; |
| unsigned numfrag; |
| unsigned fragshift; |
| /* XXX zab - swptr only in here so that it can be referenced by |
| clear_advance, as far as I can tell :( */ |
| unsigned hwptr, swptr; |
| unsigned total_bytes; |
| int count; |
| unsigned error; /* over/underrun */ |
| wait_queue_head_t wait; |
| /* redundant, but makes calculations easier */ |
| unsigned fragsize; |
| unsigned dmasize; |
| unsigned fragsamples; |
| /* OSS stuff */ |
| unsigned mapped:1; |
| unsigned ready:1; /* our oss buffers are ready to go */ |
| unsigned endcleared:1; |
| unsigned ossfragshift; |
| int ossmaxfrags; |
| unsigned subdivision; |
| u16 base; /* Offset for ptr */ |
| } dma_dac, dma_adc; |
| |
| /* pointer to each dsp?s piece of the apu->src buffer page */ |
| void *mixbuf; |
| |
| }; |
| |
| struct ess_card { |
| unsigned int magic; |
| |
| /* We keep maestro cards in a linked list */ |
| struct ess_card *next; |
| |
| int dev_mixer; |
| |
| int card_type; |
| |
| /* as most of this is static, |
| perhaps it should be a pointer to a global struct */ |
| struct mixer_goo { |
| int modcnt; |
| int supported_mixers; |
| int stereo_mixers; |
| int record_sources; |
| /* the caller must guarantee arg sanity before calling these */ |
| /* int (*read_mixer)(struct ess_card *card, int index);*/ |
| void (*write_mixer)(struct ess_card *card,int mixer, unsigned int left,unsigned int right); |
| int (*recmask_io)(struct ess_card *card,int rw,int mask); |
| unsigned int mixer_state[SOUND_MIXER_NRDEVICES]; |
| } mix; |
| |
| int power_regs; |
| |
| int in_suspend; |
| wait_queue_head_t suspend_queue; |
| |
| struct ess_state channels[MAX_DSPS]; |
| u16 maestro_map[NR_IDRS]; /* Register map */ |
| /* we have to store this junk so that we can come back from a |
| suspend */ |
| u16 apu_map[NR_APUS][NR_APU_REGS]; /* contents of apu regs */ |
| |
| /* this locks around the physical registers on the card */ |
| spinlock_t lock; |
| |
| /* memory for this card.. wavecache limited :(*/ |
| void *dmapages; |
| int dmaorder; |
| |
| /* hardware resources */ |
| struct pci_dev *pcidev; |
| u32 iobase; |
| u32 irq; |
| |
| int bob_freq; |
| char dsps_open; |
| |
| int dock_mute_vol; |
| }; |
| |
| static void set_mixer(struct ess_card *card,unsigned int mixer, unsigned int val ); |
| |
| static unsigned |
| ld2(unsigned int x) |
| { |
| unsigned r = 0; |
| |
| if (x >= 0x10000) { |
| x >>= 16; |
| r += 16; |
| } |
| if (x >= 0x100) { |
| x >>= 8; |
| r += 8; |
| } |
| if (x >= 0x10) { |
| x >>= 4; |
| r += 4; |
| } |
| if (x >= 4) { |
| x >>= 2; |
| r += 2; |
| } |
| if (x >= 2) |
| r++; |
| return r; |
| } |
| |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static void check_suspend(struct ess_card *card); |
| |
| /* --------------------------------------------------------------------- */ |
| |
| |
| /* |
| * ESS Maestro AC97 codec programming interface. |
| */ |
| |
| static void maestro_ac97_set(struct ess_card *card, u8 cmd, u16 val) |
| { |
| int io = card->iobase; |
| int i; |
| /* |
| * Wait for the codec bus to be free |
| */ |
| |
| check_suspend(card); |
| |
| for(i=0;i<10000;i++) |
| { |
| if(!(inb(io+ESS_AC97_INDEX)&1)) |
| break; |
| } |
| /* |
| * Write the bus |
| */ |
| outw(val, io+ESS_AC97_DATA); |
| mdelay(1); |
| outb(cmd, io+ESS_AC97_INDEX); |
| mdelay(1); |
| } |
| |
| static u16 maestro_ac97_get(struct ess_card *card, u8 cmd) |
| { |
| int io = card->iobase; |
| int sanity=10000; |
| u16 data; |
| int i; |
| |
| check_suspend(card); |
| /* |
| * Wait for the codec bus to be free |
| */ |
| |
| for(i=0;i<10000;i++) |
| { |
| if(!(inb(io+ESS_AC97_INDEX)&1)) |
| break; |
| } |
| |
| outb(cmd|0x80, io+ESS_AC97_INDEX); |
| mdelay(1); |
| |
| while(inb(io+ESS_AC97_INDEX)&1) |
| { |
| sanity--; |
| if(!sanity) |
| { |
| printk(KERN_ERR "maestro: ac97 codec timeout reading 0x%x.\n",cmd); |
| return 0; |
| } |
| } |
| data=inw(io+ESS_AC97_DATA); |
| mdelay(1); |
| return data; |
| } |
| |
| /* OSS interface to the ac97s.. */ |
| |
| #define AC97_STEREO_MASK (SOUND_MASK_VOLUME|\ |
| SOUND_MASK_PCM|SOUND_MASK_LINE|SOUND_MASK_CD|\ |
| SOUND_MASK_VIDEO|SOUND_MASK_LINE1|SOUND_MASK_IGAIN) |
| |
| #define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \ |
| SOUND_MASK_BASS|SOUND_MASK_TREBLE|SOUND_MASK_MIC|\ |
| SOUND_MASK_SPEAKER) |
| |
| #define AC97_RECORD_MASK (SOUND_MASK_MIC|\ |
| SOUND_MASK_CD| SOUND_MASK_VIDEO| SOUND_MASK_LINE1| SOUND_MASK_LINE|\ |
| SOUND_MASK_PHONEIN) |
| |
| #define supported_mixer(CARD,FOO) ( CARD->mix.supported_mixers & (1<<FOO) ) |
| |
| /* this table has default mixer values for all OSS mixers. |
| be sure to fill it in if you add oss mixers |
| to anyone's supported mixer defines */ |
| |
| static unsigned int mixer_defaults[SOUND_MIXER_NRDEVICES] = { |
| [SOUND_MIXER_VOLUME] = 0x3232, |
| [SOUND_MIXER_BASS] = 0x3232, |
| [SOUND_MIXER_TREBLE] = 0x3232, |
| [SOUND_MIXER_SPEAKER] = 0x3232, |
| [SOUND_MIXER_MIC] = 0x8000, /* annoying */ |
| [SOUND_MIXER_LINE] = 0x3232, |
| [SOUND_MIXER_CD] = 0x3232, |
| [SOUND_MIXER_VIDEO] = 0x3232, |
| [SOUND_MIXER_LINE1] = 0x3232, |
| [SOUND_MIXER_PCM] = 0x3232, |
| [SOUND_MIXER_IGAIN] = 0x3232 |
| }; |
| |
| static struct ac97_mixer_hw { |
| unsigned char offset; |
| int scale; |
| } ac97_hw[SOUND_MIXER_NRDEVICES]= { |
| [SOUND_MIXER_VOLUME] = {0x02,63}, |
| [SOUND_MIXER_BASS] = {0x08,15}, |
| [SOUND_MIXER_TREBLE] = {0x08,15}, |
| [SOUND_MIXER_SPEAKER] = {0x0a,15}, |
| [SOUND_MIXER_MIC] = {0x0e,31}, |
| [SOUND_MIXER_LINE] = {0x10,31}, |
| [SOUND_MIXER_CD] = {0x12,31}, |
| [SOUND_MIXER_VIDEO] = {0x14,31}, |
| [SOUND_MIXER_LINE1] = {0x16,31}, |
| [SOUND_MIXER_PCM] = {0x18,31}, |
| [SOUND_MIXER_IGAIN] = {0x1c,15} |
| }; |
| |
| #if 0 /* *shrug* removed simply because we never used it. |
| feel free to implement again if needed */ |
| |
| /* reads the given OSS mixer from the ac97 |
| the caller must have insured that the ac97 knows |
| about that given mixer, and should be holding a |
| spinlock for the card */ |
| static int ac97_read_mixer(struct ess_card *card, int mixer) |
| { |
| u16 val; |
| int ret=0; |
| struct ac97_mixer_hw *mh = &ac97_hw[mixer]; |
| |
| val = maestro_ac97_get(card, mh->offset); |
| |
| if(AC97_STEREO_MASK & (1<<mixer)) { |
| /* nice stereo mixers .. */ |
| int left,right; |
| |
| left = (val >> 8) & 0x7f; |
| right = val & 0x7f; |
| |
| if (mixer == SOUND_MIXER_IGAIN) { |
| right = (right * 100) / mh->scale; |
| left = (left * 100) / mh->scale; |
| } else { |
| right = 100 - ((right * 100) / mh->scale); |
| left = 100 - ((left * 100) / mh->scale); |
| } |
| |
| ret = left | (right << 8); |
| } else if (mixer == SOUND_MIXER_SPEAKER) { |
| ret = 100 - ((((val & 0x1e)>>1) * 100) / mh->scale); |
| } else if (mixer == SOUND_MIXER_MIC) { |
| ret = 100 - (((val & 0x1f) * 100) / mh->scale); |
| /* the low bit is optional in the tone sliders and masking |
| it lets is avoid the 0xf 'bypass'.. */ |
| } else if (mixer == SOUND_MIXER_BASS) { |
| ret = 100 - ((((val >> 8) & 0xe) * 100) / mh->scale); |
| } else if (mixer == SOUND_MIXER_TREBLE) { |
| ret = 100 - (((val & 0xe) * 100) / mh->scale); |
| } |
| |
| M_printk("read mixer %d (0x%x) %x -> %x\n",mixer,mh->offset,val,ret); |
| |
| return ret; |
| } |
| #endif |
| |
| /* write the OSS encoded volume to the given OSS encoded mixer, |
| again caller's job to make sure all is well in arg land, |
| call with spinlock held */ |
| |
| /* linear scale -> log */ |
| static unsigned char lin2log[101] = |
| { |
| 0, 0 , 15 , 23 , 30 , 34 , 38 , 42 , 45 , 47 , |
| 50 , 52 , 53 , 55 , 57 , 58 , 60 , 61 , 62 , |
| 63 , 65 , 66 , 67 , 68 , 69 , 69 , 70 , 71 , |
| 72 , 73 , 73 , 74 , 75 , 75 , 76 , 77 , 77 , |
| 78 , 78 , 79 , 80 , 80 , 81 , 81 , 82 , 82 , |
| 83 , 83 , 84 , 84 , 84 , 85 , 85 , 86 , 86 , |
| 87 , 87 , 87 , 88 , 88 , 88 , 89 , 89 , 89 , |
| 90 , 90 , 90 , 91 , 91 , 91 , 92 , 92 , 92 , |
| 93 , 93 , 93 , 94 , 94 , 94 , 94 , 95 , 95 , |
| 95 , 95 , 96 , 96 , 96 , 96 , 97 , 97 , 97 , |
| 97 , 98 , 98 , 98 , 98 , 99 , 99 , 99 , 99 , 99 |
| }; |
| |
| static void ac97_write_mixer(struct ess_card *card,int mixer, unsigned int left, unsigned int right) |
| { |
| u16 val=0; |
| struct ac97_mixer_hw *mh = &ac97_hw[mixer]; |
| |
| M_printk("wrote mixer %d (0x%x) %d,%d",mixer,mh->offset,left,right); |
| |
| if(AC97_STEREO_MASK & (1<<mixer)) { |
| /* stereo mixers, mute them if we can */ |
| |
| if (mixer == SOUND_MIXER_IGAIN) { |
| /* igain's slider is reversed.. */ |
| right = (right * mh->scale) / 100; |
| left = (left * mh->scale) / 100; |
| if ((left == 0) && (right == 0)) |
| val |= 0x8000; |
| } else if (mixer == SOUND_MIXER_PCM || mixer == SOUND_MIXER_CD) { |
| /* log conversion seems bad for them */ |
| if ((left == 0) && (right == 0)) |
| val = 0x8000; |
| right = ((100 - right) * mh->scale) / 100; |
| left = ((100 - left) * mh->scale) / 100; |
| } else { |
| /* log conversion for the stereo controls */ |
| if((left == 0) && (right == 0)) |
| val = 0x8000; |
| right = ((100 - lin2log[right]) * mh->scale) / 100; |
| left = ((100 - lin2log[left]) * mh->scale) / 100; |
| } |
| |
| val |= (left << 8) | right; |
| |
| } else if (mixer == SOUND_MIXER_SPEAKER) { |
| val = (((100 - left) * mh->scale) / 100) << 1; |
| } else if (mixer == SOUND_MIXER_MIC) { |
| val = maestro_ac97_get(card, mh->offset) & ~0x801f; |
| val |= (((100 - left) * mh->scale) / 100); |
| /* the low bit is optional in the tone sliders and masking |
| it lets is avoid the 0xf 'bypass'.. */ |
| } else if (mixer == SOUND_MIXER_BASS) { |
| val = maestro_ac97_get(card , mh->offset) & ~0x0f00; |
| val |= ((((100 - left) * mh->scale) / 100) << 8) & 0x0e00; |
| } else if (mixer == SOUND_MIXER_TREBLE) { |
| val = maestro_ac97_get(card , mh->offset) & ~0x000f; |
| val |= (((100 - left) * mh->scale) / 100) & 0x000e; |
| } |
| |
| maestro_ac97_set(card , mh->offset, val); |
| |
| M_printk(" -> %x\n",val); |
| } |
| |
| /* the following tables allow us to go from |
| OSS <-> ac97 quickly. */ |
| |
| enum ac97_recsettings { |
| AC97_REC_MIC=0, |
| AC97_REC_CD, |
| AC97_REC_VIDEO, |
| AC97_REC_AUX, |
| AC97_REC_LINE, |
| AC97_REC_STEREO, /* combination of all enabled outputs.. */ |
| AC97_REC_MONO, /*.. or the mono equivalent */ |
| AC97_REC_PHONE |
| }; |
| |
| static unsigned int ac97_oss_mask[] = { |
| [AC97_REC_MIC] = SOUND_MASK_MIC, |
| [AC97_REC_CD] = SOUND_MASK_CD, |
| [AC97_REC_VIDEO] = SOUND_MASK_VIDEO, |
| [AC97_REC_AUX] = SOUND_MASK_LINE1, |
| [AC97_REC_LINE] = SOUND_MASK_LINE, |
| [AC97_REC_PHONE] = SOUND_MASK_PHONEIN |
| }; |
| |
| /* indexed by bit position */ |
| static unsigned int ac97_oss_rm[] = { |
| [SOUND_MIXER_MIC] = AC97_REC_MIC, |
| [SOUND_MIXER_CD] = AC97_REC_CD, |
| [SOUND_MIXER_VIDEO] = AC97_REC_VIDEO, |
| [SOUND_MIXER_LINE1] = AC97_REC_AUX, |
| [SOUND_MIXER_LINE] = AC97_REC_LINE, |
| [SOUND_MIXER_PHONEIN] = AC97_REC_PHONE |
| }; |
| |
| /* read or write the recmask |
| the ac97 can really have left and right recording |
| inputs independently set, but OSS doesn't seem to |
| want us to express that to the user. |
| the caller guarantees that we have a supported bit set, |
| and they must be holding the card's spinlock */ |
| static int |
| ac97_recmask_io(struct ess_card *card, int read, int mask) |
| { |
| unsigned int val = ac97_oss_mask[ maestro_ac97_get(card, 0x1a) & 0x7 ]; |
| |
| if (read) return val; |
| |
| /* oss can have many inputs, maestro can't. try |
| to pick the 'new' one */ |
| |
| if (mask != val) mask &= ~val; |
| |
| val = ffs(mask) - 1; |
| val = ac97_oss_rm[val]; |
| val |= val << 8; /* set both channels */ |
| |
| M_printk("maestro: setting ac97 recmask to 0x%x\n",val); |
| |
| maestro_ac97_set(card,0x1a,val); |
| |
| return 0; |
| }; |
| |
| /* |
| * The Maestro can be wired to a standard AC97 compliant codec |
| * (see www.intel.com for the pdf's on this), or to a PT101 codec |
| * which appears to be the ES1918 (data sheet on the esstech.com.tw site) |
| * |
| * The PT101 setup is untested. |
| */ |
| |
| static u16 __init maestro_ac97_init(struct ess_card *card) |
| { |
| u16 vend1, vend2, caps; |
| |
| card->mix.supported_mixers = AC97_SUPPORTED_MASK; |
| card->mix.stereo_mixers = AC97_STEREO_MASK; |
| card->mix.record_sources = AC97_RECORD_MASK; |
| /* card->mix.read_mixer = ac97_read_mixer;*/ |
| card->mix.write_mixer = ac97_write_mixer; |
| card->mix.recmask_io = ac97_recmask_io; |
| |
| vend1 = maestro_ac97_get(card, 0x7c); |
| vend2 = maestro_ac97_get(card, 0x7e); |
| |
| caps = maestro_ac97_get(card, 0x00); |
| |
| printk(KERN_INFO "maestro: AC97 Codec detected: v: 0x%2x%2x caps: 0x%x pwr: 0x%x\n", |
| vend1,vend2,caps,maestro_ac97_get(card,0x26) & 0xf); |
| |
| if (! (caps & 0x4) ) { |
| /* no bass/treble nobs */ |
| card->mix.supported_mixers &= ~(SOUND_MASK_BASS|SOUND_MASK_TREBLE); |
| } |
| |
| /* XXX endianness, dork head. */ |
| /* vendor specifc bits.. */ |
| switch ((long)(vend1 << 16) | vend2) { |
| case 0x545200ff: /* TriTech */ |
| /* no idea what this does */ |
| maestro_ac97_set(card,0x2a,0x0001); |
| maestro_ac97_set(card,0x2c,0x0000); |
| maestro_ac97_set(card,0x2c,0xffff); |
| break; |
| #if 0 /* i thought the problems I was seeing were with |
| the 1921, but apparently they were with the pci board |
| it was on, so this code is commented out. |
| lets see if this holds true. */ |
| case 0x83847609: /* ESS 1921 */ |
| /* writing to 0xe (mic) or 0x1a (recmask) seems |
| to hang this codec */ |
| card->mix.supported_mixers &= ~(SOUND_MASK_MIC); |
| card->mix.record_sources = 0; |
| card->mix.recmask_io = NULL; |
| #if 0 /* don't ask. I have yet to see what these actually do. */ |
| maestro_ac97_set(card,0x76,0xABBA); /* o/~ Take a chance on me o/~ */ |
| udelay(20); |
| maestro_ac97_set(card,0x78,0x3002); |
| udelay(20); |
| maestro_ac97_set(card,0x78,0x3802); |
| udelay(20); |
| #endif |
| break; |
| #endif |
| default: break; |
| } |
| |
| maestro_ac97_set(card, 0x1E, 0x0404); |
| /* null misc stuff */ |
| maestro_ac97_set(card, 0x20, 0x0000); |
| |
| return 0; |
| } |
| |
| #if 0 /* there has been 1 person on the planet with a pt101 that we |
| know of. If they care, they can put this back in :) */ |
| static u16 maestro_pt101_init(struct ess_card *card,int iobase) |
| { |
| printk(KERN_INFO "maestro: PT101 Codec detected, initializing but _not_ installing mixer device.\n"); |
| /* who knows.. */ |
| maestro_ac97_set(iobase, 0x2A, 0x0001); |
| maestro_ac97_set(iobase, 0x2C, 0x0000); |
| maestro_ac97_set(iobase, 0x2C, 0xFFFF); |
| maestro_ac97_set(iobase, 0x10, 0x9F1F); |
| maestro_ac97_set(iobase, 0x12, 0x0808); |
| maestro_ac97_set(iobase, 0x14, 0x9F1F); |
| maestro_ac97_set(iobase, 0x16, 0x9F1F); |
| maestro_ac97_set(iobase, 0x18, 0x0404); |
| maestro_ac97_set(iobase, 0x1A, 0x0000); |
| maestro_ac97_set(iobase, 0x1C, 0x0000); |
| maestro_ac97_set(iobase, 0x02, 0x0404); |
| maestro_ac97_set(iobase, 0x04, 0x0808); |
| maestro_ac97_set(iobase, 0x0C, 0x801F); |
| maestro_ac97_set(iobase, 0x0E, 0x801F); |
| return 0; |
| } |
| #endif |
| |
| /* this is very magic, and very slow.. */ |
| static void |
| maestro_ac97_reset(int ioaddr, struct pci_dev *pcidev) |
| { |
| u16 save_68; |
| u16 w; |
| u32 vend; |
| |
| outw( inw(ioaddr + 0x38) & 0xfffc, ioaddr + 0x38); |
| outw( inw(ioaddr + 0x3a) & 0xfffc, ioaddr + 0x3a); |
| outw( inw(ioaddr + 0x3c) & 0xfffc, ioaddr + 0x3c); |
| |
| /* reset the first codec */ |
| outw(0x0000, ioaddr+0x36); |
| save_68 = inw(ioaddr+0x68); |
| pci_read_config_word(pcidev, 0x58, &w); /* something magical with gpio and bus arb. */ |
| pci_read_config_dword(pcidev, PCI_SUBSYSTEM_VENDOR_ID, &vend); |
| if( w & 0x1) |
| save_68 |= 0x10; |
| outw(0xfffe, ioaddr + 0x64); /* tickly gpio 0.. */ |
| outw(0x0001, ioaddr + 0x68); |
| outw(0x0000, ioaddr + 0x60); |
| udelay(20); |
| outw(0x0001, ioaddr + 0x60); |
| mdelay(20); |
| |
| outw(save_68 | 0x1, ioaddr + 0x68); /* now restore .. */ |
| outw( (inw(ioaddr + 0x38) & 0xfffc)|0x1, ioaddr + 0x38); |
| outw( (inw(ioaddr + 0x3a) & 0xfffc)|0x1, ioaddr + 0x3a); |
| outw( (inw(ioaddr + 0x3c) & 0xfffc)|0x1, ioaddr + 0x3c); |
| |
| /* now the second codec */ |
| outw(0x0000, ioaddr+0x36); |
| outw(0xfff7, ioaddr + 0x64); |
| save_68 = inw(ioaddr+0x68); |
| outw(0x0009, ioaddr + 0x68); |
| outw(0x0001, ioaddr + 0x60); |
| udelay(20); |
| outw(0x0009, ioaddr + 0x60); |
| mdelay(500); /* .. ouch.. */ |
| outw( inw(ioaddr + 0x38) & 0xfffc, ioaddr + 0x38); |
| outw( inw(ioaddr + 0x3a) & 0xfffc, ioaddr + 0x3a); |
| outw( inw(ioaddr + 0x3c) & 0xfffc, ioaddr + 0x3c); |
| |
| #if 0 /* the loop here needs to be much better if we want it.. */ |
| M_printk("trying software reset\n"); |
| /* try and do a software reset */ |
| outb(0x80|0x7c, ioaddr + 0x30); |
| for (w=0; ; w++) { |
| if ((inw(ioaddr+ 0x30) & 1) == 0) { |
| if(inb(ioaddr + 0x32) !=0) break; |
| |
| outb(0x80|0x7d, ioaddr + 0x30); |
| if (((inw(ioaddr+ 0x30) & 1) == 0) && (inb(ioaddr + 0x32) !=0)) break; |
| outb(0x80|0x7f, ioaddr + 0x30); |
| if (((inw(ioaddr+ 0x30) & 1) == 0) && (inb(ioaddr + 0x32) !=0)) break; |
| } |
| |
| if( w > 10000) { |
| outb( inb(ioaddr + 0x37) | 0x08, ioaddr + 0x37); /* do a software reset */ |
| mdelay(500); /* oh my.. */ |
| outb( inb(ioaddr + 0x37) & ~0x08, ioaddr + 0x37); |
| udelay(1); |
| outw( 0x80, ioaddr+0x30); |
| for(w = 0 ; w < 10000; w++) { |
| if((inw(ioaddr + 0x30) & 1) ==0) break; |
| } |
| } |
| } |
| #endif |
| if ( vend == NEC_VERSA_SUBID1 || vend == NEC_VERSA_SUBID2) { |
| /* turn on external amp? */ |
| outw(0xf9ff, ioaddr + 0x64); |
| outw(inw(ioaddr+0x68) | 0x600, ioaddr + 0x68); |
| outw(0x0209, ioaddr + 0x60); |
| } |
| |
| /* Turn on the 978 docking chip. |
| First frob the "master output enable" bit, |
| then set most of the playback volume control registers to max. */ |
| outb(inb(ioaddr+0xc0)|(1<<5), ioaddr+0xc0); |
| outb(0xff, ioaddr+0xc3); |
| outb(0xff, ioaddr+0xc4); |
| outb(0xff, ioaddr+0xc6); |
| outb(0xff, ioaddr+0xc8); |
| outb(0x3f, ioaddr+0xcf); |
| outb(0x3f, ioaddr+0xd0); |
| } |
| /* |
| * Indirect register access. Not all registers are readable so we |
| * need to keep register state ourselves |
| */ |
| |
| #define WRITEABLE_MAP 0xEFFFFF |
| #define READABLE_MAP 0x64003F |
| |
| /* |
| * The Maestro engineers were a little indirection happy. These indirected |
| * registers themselves include indirect registers at another layer |
| */ |
| |
| static void __maestro_write(struct ess_card *card, u16 reg, u16 data) |
| { |
| long ioaddr = card->iobase; |
| |
| outw(reg, ioaddr+0x02); |
| outw(data, ioaddr+0x00); |
| if( reg >= NR_IDRS) printk("maestro: IDR %d out of bounds!\n",reg); |
| else card->maestro_map[reg]=data; |
| |
| } |
| |
| static void maestro_write(struct ess_state *s, u16 reg, u16 data) |
| { |
| unsigned long flags; |
| |
| check_suspend(s->card); |
| spin_lock_irqsave(&s->card->lock,flags); |
| |
| __maestro_write(s->card,reg,data); |
| |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| } |
| |
| static u16 __maestro_read(struct ess_card *card, u16 reg) |
| { |
| long ioaddr = card->iobase; |
| |
| outw(reg, ioaddr+0x02); |
| return card->maestro_map[reg]=inw(ioaddr+0x00); |
| } |
| |
| static u16 maestro_read(struct ess_state *s, u16 reg) |
| { |
| if(READABLE_MAP & (1<<reg)) |
| { |
| unsigned long flags; |
| check_suspend(s->card); |
| spin_lock_irqsave(&s->card->lock,flags); |
| |
| __maestro_read(s->card,reg); |
| |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| } |
| return s->card->maestro_map[reg]; |
| } |
| |
| /* |
| * These routines handle accessing the second level indirections to the |
| * wave ram. |
| */ |
| |
| /* |
| * The register names are the ones ESS uses (see 104T31.ZIP) |
| */ |
| |
| #define IDR0_DATA_PORT 0x00 |
| #define IDR1_CRAM_POINTER 0x01 |
| #define IDR2_CRAM_DATA 0x02 |
| #define IDR3_WAVE_DATA 0x03 |
| #define IDR4_WAVE_PTR_LOW 0x04 |
| #define IDR5_WAVE_PTR_HI 0x05 |
| #define IDR6_TIMER_CTRL 0x06 |
| #define IDR7_WAVE_ROMRAM 0x07 |
| |
| static void apu_index_set(struct ess_card *card, u16 index) |
| { |
| int i; |
| __maestro_write(card, IDR1_CRAM_POINTER, index); |
| for(i=0;i<1000;i++) |
| if(__maestro_read(card, IDR1_CRAM_POINTER)==index) |
| return; |
| printk(KERN_WARNING "maestro: APU register select failed.\n"); |
| } |
| |
| static void apu_data_set(struct ess_card *card, u16 data) |
| { |
| int i; |
| for(i=0;i<1000;i++) |
| { |
| if(__maestro_read(card, IDR0_DATA_PORT)==data) |
| return; |
| __maestro_write(card, IDR0_DATA_PORT, data); |
| } |
| } |
| |
| /* |
| * This is the public interface for APU manipulation. It handles the |
| * interlock to avoid two APU writes in parallel etc. Don't diddle |
| * directly with the stuff above. |
| */ |
| |
| static void apu_set_register(struct ess_state *s, u16 channel, u8 reg, u16 data) |
| { |
| unsigned long flags; |
| |
| check_suspend(s->card); |
| |
| if(channel&ESS_CHAN_HARD) |
| channel&=~ESS_CHAN_HARD; |
| else |
| { |
| if(channel>5) |
| printk("BAD CHANNEL %d.\n",channel); |
| else |
| channel = s->apu[channel]; |
| /* store based on real hardware apu/reg */ |
| s->card->apu_map[channel][reg]=data; |
| } |
| reg|=(channel<<4); |
| |
| /* hooray for double indirection!! */ |
| spin_lock_irqsave(&s->card->lock,flags); |
| |
| apu_index_set(s->card, reg); |
| apu_data_set(s->card, data); |
| |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| } |
| |
| static u16 apu_get_register(struct ess_state *s, u16 channel, u8 reg) |
| { |
| unsigned long flags; |
| u16 v; |
| |
| check_suspend(s->card); |
| |
| if(channel&ESS_CHAN_HARD) |
| channel&=~ESS_CHAN_HARD; |
| else |
| channel = s->apu[channel]; |
| |
| reg|=(channel<<4); |
| |
| spin_lock_irqsave(&s->card->lock,flags); |
| |
| apu_index_set(s->card, reg); |
| v=__maestro_read(s->card, IDR0_DATA_PORT); |
| |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| return v; |
| } |
| |
| |
| /* |
| * The wavecache buffers between the APUs and |
| * pci bus mastering |
| */ |
| |
| static void wave_set_register(struct ess_state *s, u16 reg, u16 value) |
| { |
| long ioaddr = s->card->iobase; |
| unsigned long flags; |
| check_suspend(s->card); |
| |
| spin_lock_irqsave(&s->card->lock,flags); |
| |
| outw(reg, ioaddr+0x10); |
| outw(value, ioaddr+0x12); |
| |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| } |
| |
| static u16 wave_get_register(struct ess_state *s, u16 reg) |
| { |
| long ioaddr = s->card->iobase; |
| unsigned long flags; |
| u16 value; |
| check_suspend(s->card); |
| |
| spin_lock_irqsave(&s->card->lock,flags); |
| outw(reg, ioaddr+0x10); |
| value=inw(ioaddr+0x12); |
| spin_unlock_irqrestore(&s->card->lock,flags); |
| |
| return value; |
| } |
| |
| static void sound_reset(int ioaddr) |
| { |
| outw(0x2000, 0x18+ioaddr); |
| udelay(1); |
| outw(0x0000, 0x18+ioaddr); |
| udelay(1); |
| } |
| |
| /* sets the play formats of these apus, should be passed the already shifted format */ |
| static void set_apu_fmt(struct ess_state *s, int apu, int mode) |
| { |
| int apu_fmt = 0x10; |
| |
| if(!(mode&ESS_FMT_16BIT)) apu_fmt+=0x20; |
| if((mode&ESS_FMT_STEREO)) apu_fmt+=0x10; |
| s->apu_mode[apu] = apu_fmt; |
| s->apu_mode[apu+1] = apu_fmt; |
| } |
| |
| /* this only fixes the output apu mode to be later set by start_dac and |
| company. output apu modes are set in ess_rec_setup */ |
| static void set_fmt(struct ess_state *s, unsigned char mask, unsigned char data) |
| { |
| s->fmt = (s->fmt & mask) | data; |
| set_apu_fmt(s, 0, (s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK); |
| } |
| |
| /* this is off by a little bit.. */ |
| static u32 compute_rate(struct ess_state *s, u32 freq) |
| { |
| u32 clock = clock_freq[s->card->card_type]; |
| |
| freq = (freq * clocking)/48000; |
| |
| if (freq == 48000) |
| return 0x10000; |
| |
| return ((freq / clock) <<16 )+ |
| (((freq % clock) << 16) / clock); |
| } |
| |
| static void set_dac_rate(struct ess_state *s, unsigned int rate) |
| { |
| u32 freq; |
| int fmt = (s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK; |
| |
| if (rate > 48000) |
| rate = 48000; |
| if (rate < 4000) |
| rate = 4000; |
| |
| s->ratedac = rate; |
| |
| if(! (fmt & ESS_FMT_16BIT) && !(fmt & ESS_FMT_STEREO)) |
| rate >>= 1; |
| |
| /* M_printk("computing dac rate %d with mode %d\n",rate,s->fmt);*/ |
| |
| freq = compute_rate(s, rate); |
| |
| /* Load the frequency, turn on 6dB */ |
| apu_set_register(s, 0, 2,(apu_get_register(s, 0, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 0, 3, freq>>8); |
| apu_set_register(s, 1, 2,(apu_get_register(s, 1, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 1, 3, freq>>8); |
| } |
| |
| static void set_adc_rate(struct ess_state *s, unsigned rate) |
| { |
| u32 freq; |
| |
| /* Sample Rate conversion APUs don't like 0x10000 for their rate */ |
| if (rate > 47999) |
| rate = 47999; |
| if (rate < 4000) |
| rate = 4000; |
| |
| s->rateadc = rate; |
| |
| freq = compute_rate(s, rate); |
| |
| /* Load the frequency, turn on 6dB */ |
| apu_set_register(s, 2, 2,(apu_get_register(s, 2, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 2, 3, freq>>8); |
| apu_set_register(s, 3, 2,(apu_get_register(s, 3, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 3, 3, freq>>8); |
| |
| /* fix mixer rate at 48khz. and its _must_ be 0x10000. */ |
| freq = 0x10000; |
| |
| apu_set_register(s, 4, 2,(apu_get_register(s, 4, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 4, 3, freq>>8); |
| apu_set_register(s, 5, 2,(apu_get_register(s, 5, 2)&0x00FF)| |
| ( ((freq&0xFF)<<8)|0x10 )); |
| apu_set_register(s, 5, 3, freq>>8); |
| } |
| |
| /* Stop our host of recording apus */ |
| static inline void stop_adc(struct ess_state *s) |
| { |
| /* XXX lets hope we don't have to lock around this */ |
| if (! (s->enable & ADC_RUNNING)) return; |
| |
| s->enable &= ~ADC_RUNNING; |
| apu_set_register(s, 2, 0, apu_get_register(s, 2, 0)&0xFF0F); |
| apu_set_register(s, 3, 0, apu_get_register(s, 3, 0)&0xFF0F); |
| apu_set_register(s, 4, 0, apu_get_register(s, 2, 0)&0xFF0F); |
| apu_set_register(s, 5, 0, apu_get_register(s, 3, 0)&0xFF0F); |
| } |
| |
| /* stop output apus */ |
| static void stop_dac(struct ess_state *s) |
| { |
| /* XXX have to lock around this? */ |
| if (! (s->enable & DAC_RUNNING)) return; |
| |
| s->enable &= ~DAC_RUNNING; |
| apu_set_register(s, 0, 0, apu_get_register(s, 0, 0)&0xFF0F); |
| apu_set_register(s, 1, 0, apu_get_register(s, 1, 0)&0xFF0F); |
| } |
| |
| static void start_dac(struct ess_state *s) |
| { |
| /* XXX locks? */ |
| if ( (s->dma_dac.mapped || s->dma_dac.count > 0) && |
| s->dma_dac.ready && |
| (! (s->enable & DAC_RUNNING)) ) { |
| |
| s->enable |= DAC_RUNNING; |
| |
| apu_set_register(s, 0, 0, |
| (apu_get_register(s, 0, 0)&0xFF0F)|s->apu_mode[0]); |
| |
| if((s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_STEREO) |
| apu_set_register(s, 1, 0, |
| (apu_get_register(s, 1, 0)&0xFF0F)|s->apu_mode[1]); |
| } |
| } |
| |
| static void start_adc(struct ess_state *s) |
| { |
| /* XXX locks? */ |
| if ((s->dma_adc.mapped || s->dma_adc.count < (signed)(s->dma_adc.dmasize - 2*s->dma_adc.fragsize)) |
| && s->dma_adc.ready && (! (s->enable & ADC_RUNNING)) ) { |
| |
| s->enable |= ADC_RUNNING; |
| apu_set_register(s, 2, 0, |
| (apu_get_register(s, 2, 0)&0xFF0F)|s->apu_mode[2]); |
| apu_set_register(s, 4, 0, |
| (apu_get_register(s, 4, 0)&0xFF0F)|s->apu_mode[4]); |
| |
| if( s->fmt & (ESS_FMT_STEREO << ESS_ADC_SHIFT)) { |
| apu_set_register(s, 3, 0, |
| (apu_get_register(s, 3, 0)&0xFF0F)|s->apu_mode[3]); |
| apu_set_register(s, 5, 0, |
| (apu_get_register(s, 5, 0)&0xFF0F)|s->apu_mode[5]); |
| } |
| |
| } |
| } |
| |
| |
| /* |
| * Native play back driver |
| */ |
| |
| /* the mode passed should be already shifted and masked */ |
| static void |
| ess_play_setup(struct ess_state *ess, int mode, u32 rate, void *buffer, int size) |
| { |
| u32 pa; |
| u32 tmpval; |
| int high_apu = 0; |
| int channel; |
| |
| M_printk("mode=%d rate=%d buf=%p len=%d.\n", |
| mode, rate, buffer, size); |
| |
| /* all maestro sizes are in 16bit words */ |
| size >>=1; |
| |
| if(mode&ESS_FMT_STEREO) { |
| high_apu++; |
| /* only 16/stereo gets size divided */ |
| if(mode&ESS_FMT_16BIT) |
| size>>=1; |
| } |
| |
| for(channel=0; channel <= high_apu; channel++) |
| { |
| pa = virt_to_bus(buffer); |
| |
| /* set the wavecache control reg */ |
| tmpval = (pa - 0x10) & 0xFFF8; |
| if(!(mode & ESS_FMT_16BIT)) tmpval |= 4; |
| if(mode & ESS_FMT_STEREO) tmpval |= 2; |
| ess->apu_base[channel]=tmpval; |
| wave_set_register(ess, ess->apu[channel]<<3, tmpval); |
| |
| pa -= virt_to_bus(ess->card->dmapages); |
| pa>>=1; /* words */ |
| |
| /* base offset of dma calcs when reading the pointer |
| on the left one */ |
| if(!channel) ess->dma_dac.base = pa&0xFFFF; |
| |
| pa|=0x00400000; /* System RAM */ |
| |
| /* XXX the 16bit here might not be needed.. */ |
| if((mode & ESS_FMT_STEREO) && (mode & ESS_FMT_16BIT)) { |
| if(channel) |
| pa|=0x00800000; /* Stereo */ |
| pa>>=1; |
| } |
| |
| /* XXX think about endianess when writing these registers */ |
| M_printk("maestro: ess_play_setup: APU[%d] pa = 0x%x\n", ess->apu[channel], pa); |
| /* start of sample */ |
| apu_set_register(ess, channel, 4, ((pa>>16)&0xFF)<<8); |
| apu_set_register(ess, channel, 5, pa&0xFFFF); |
| /* sample end */ |
| apu_set_register(ess, channel, 6, (pa+size)&0xFFFF); |
| /* setting loop len == sample len */ |
| apu_set_register(ess, channel, 7, size); |
| |
| /* clear effects/env.. */ |
| apu_set_register(ess, channel, 8, 0x0000); |
| /* set amp now to 0xd0 (?), low byte is 'amplitude dest'? */ |
| apu_set_register(ess, channel, 9, 0xD000); |
| |
| /* clear routing stuff */ |
| apu_set_register(ess, channel, 11, 0x0000); |
| /* dma on, no envelopes, filter to all 1s) */ |
| apu_set_register(ess, channel, 0, 0x400F); |
| |
| if(mode&ESS_FMT_16BIT) |
| ess->apu_mode[channel]=0x10; |
| else |
| ess->apu_mode[channel]=0x30; |
| |
| if(mode&ESS_FMT_STEREO) { |
| /* set panning: left or right */ |
| apu_set_register(ess, channel, 10, 0x8F00 | (channel ? 0 : 0x10)); |
| ess->apu_mode[channel] += 0x10; |
| } else |
| apu_set_register(ess, channel, 10, 0x8F08); |
| } |
| |
| /* clear WP interrupts */ |
| outw(1, ess->card->iobase+0x04); |
| /* enable WP ints */ |
| outw(inw(ess->card->iobase+0x18)|4, ess->card->iobase+0x18); |
| |
| /* go team! */ |
| set_dac_rate(ess,rate); |
| start_dac(ess); |
| } |
| |
| /* |
| * Native record driver |
| */ |
| |
| /* again, passed mode is alrady shifted/masked */ |
| static void |
| ess_rec_setup(struct ess_state *ess, int mode, u32 rate, void *buffer, int size) |
| { |
| int apu_step = 2; |
| int channel; |
| |
| M_printk("maestro: ess_rec_setup: mode=%d rate=%d buf=0x%p len=%d.\n", |
| mode, rate, buffer, size); |
| |
| /* all maestro sizes are in 16bit words */ |
| size >>=1; |
| |
| /* we're given the full size of the buffer, but |
| in stereo each channel will only use its half */ |
| if(mode&ESS_FMT_STEREO) { |
| size >>=1; |
| apu_step = 1; |
| } |
| |
| /* APU assignments: 2 = mono/left SRC |
| 3 = right SRC |
| 4 = mono/left Input Mixer |
| 5 = right Input Mixer */ |
| for(channel=2;channel<6;channel+=apu_step) |
| { |
| int i; |
| int bsize, route; |
| u32 pa; |
| u32 tmpval; |
| |
| /* data seems to flow from the codec, through an apu into |
| the 'mixbuf' bit of page, then through the SRC apu |
| and out to the real 'buffer'. ok. sure. */ |
| |
| if(channel & 0x04) { |
| /* ok, we're an input mixer going from adc |
| through the mixbuf to the other apus */ |
| |
| if(!(channel & 0x01)) { |
| pa = virt_to_bus(ess->mixbuf); |
| } else { |
| pa = virt_to_bus(ess->mixbuf + (PAGE_SIZE >> 4)); |
| } |
| |
| /* we source from a 'magic' apu */ |
| bsize = PAGE_SIZE >> 5; /* half of this channels alloc, in words */ |
| route = 0x14 + (channel - 4); /* parallel in crap, see maestro reg 0xC [8-11] */ |
| ess->apu_mode[channel] = 0x90; /* Input Mixer */ |
| |
| } else { |
| /* we're a rate converter taking |
| input from the input apus and outputing it to |
| system memory */ |
| if(!(channel & 0x01)) { |
| pa = virt_to_bus(buffer); |
| } else { |
| /* right channel records its split half. |
| *2 accommodates for rampant shifting earlier */ |
| pa = virt_to_bus(buffer + size*2); |
| } |
| |
| ess->apu_mode[channel] = 0xB0; /* Sample Rate Converter */ |
| |
| bsize = size; |
| /* get input from inputing apu */ |
| route = channel + 2; |
| } |
| |
| M_printk("maestro: ess_rec_setup: getting pa 0x%x from %d\n",pa,channel); |
| |
| /* set the wavecache control reg */ |
| tmpval = (pa - 0x10) & 0xFFF8; |
| ess->apu_base[channel]=tmpval; |
| wave_set_register(ess, ess->apu[channel]<<3, tmpval); |
| |
| pa -= virt_to_bus(ess->card->dmapages); |
| pa>>=1; /* words */ |
| |
| /* base offset of dma calcs when reading the pointer |
| on this left one */ |
| if(channel==2) ess->dma_adc.base = pa&0xFFFF; |
| |
| pa|=0x00400000; /* bit 22 -> System RAM */ |
| |
| M_printk("maestro: ess_rec_setup: APU[%d] pa = 0x%x size = 0x%x route = 0x%x\n", |
| ess->apu[channel], pa, bsize, route); |
| |
| /* Begin loading the APU */ |
| for(i=0;i<15;i++) /* clear all PBRs */ |
| apu_set_register(ess, channel, i, 0x0000); |
| |
| apu_set_register(ess, channel, 0, 0x400F); |
| |
| /* need to enable subgroups.. and we should probably |
| have different groups for different /dev/dsps.. */ |
| apu_set_register(ess, channel, 2, 0x8); |
| |
| /* Load the buffer into the wave engine */ |
| apu_set_register(ess, channel, 4, ((pa>>16)&0xFF)<<8); |
| /* XXX reg is little endian.. */ |
| apu_set_register(ess, channel, 5, pa&0xFFFF); |
| apu_set_register(ess, channel, 6, (pa+bsize)&0xFFFF); |
| apu_set_register(ess, channel, 7, bsize); |
| |
| /* clear effects/env.. */ |
| apu_set_register(ess, channel, 8, 0x00F0); |
| |
| /* amplitude now? sure. why not. */ |
| apu_set_register(ess, channel, 9, 0x0000); |
| |
| /* set filter tune, radius, polar pan */ |
| apu_set_register(ess, channel, 10, 0x8F08); |
| |
| /* route input */ |
| apu_set_register(ess, channel, 11, route); |
| } |
| |
| /* clear WP interrupts */ |
| outw(1, ess->card->iobase+0x04); |
| /* enable WP ints */ |
| outw(inw(ess->card->iobase+0x18)|4, ess->card->iobase+0x18); |
| |
| /* let 'er rip */ |
| set_adc_rate(ess,rate); |
| start_adc(ess); |
| } |
| /* --------------------------------------------------------------------- */ |
| |
| static void set_dmaa(struct ess_state *s, unsigned int addr, unsigned int count) |
| { |
| M_printk("set_dmaa??\n"); |
| } |
| |
| static void set_dmac(struct ess_state *s, unsigned int addr, unsigned int count) |
| { |
| M_printk("set_dmac??\n"); |
| } |
| |
| /* Playback pointer */ |
| static inline unsigned get_dmaa(struct ess_state *s) |
| { |
| int offset; |
| |
| offset = apu_get_register(s,0,5); |
| |
| /* M_printk("dmaa: offset: %d, base: %d\n",offset,s->dma_dac.base); */ |
| |
| offset-=s->dma_dac.base; |
| |
| return (offset&0xFFFE)<<1; /* hardware is in words */ |
| } |
| |
| /* Record pointer */ |
| static inline unsigned get_dmac(struct ess_state *s) |
| { |
| int offset; |
| |
| offset = apu_get_register(s,2,5); |
| |
| /* M_printk("dmac: offset: %d, base: %d\n",offset,s->dma_adc.base); */ |
| |
| /* The offset is an address not a position relative to base */ |
| offset-=s->dma_adc.base; |
| |
| return (offset&0xFFFE)<<1; /* hardware is in words */ |
| } |
| |
| /* |
| * Meet Bob, the timer... |
| */ |
| |
| static irqreturn_t ess_interrupt(int irq, void *dev_id, struct pt_regs *regs); |
| |
| static void stop_bob(struct ess_state *s) |
| { |
| /* Mask IDR 11,17 */ |
| maestro_write(s, 0x11, maestro_read(s, 0x11)&~1); |
| maestro_write(s, 0x17, maestro_read(s, 0x17)&~1); |
| } |
| |
| /* eventually we could be clever and limit bob ints |
| to the frequency at which our smallest duration |
| chunks may expire */ |
| #define ESS_SYSCLK 50000000 |
| static void start_bob(struct ess_state *s) |
| { |
| int prescale; |
| int divide; |
| |
| /* XXX make freq selector much smarter, see calc_bob_rate */ |
| int freq = 200; |
| |
| /* compute ideal interrupt frequency for buffer size & play rate */ |
| /* first, find best prescaler value to match freq */ |
| for(prescale=5;prescale<12;prescale++) |
| if(freq > (ESS_SYSCLK>>(prescale+9))) |
| break; |
| |
| /* next, back off prescaler whilst getting divider into optimum range */ |
| divide=1; |
| while((prescale > 5) && (divide<32)) |
| { |
| prescale--; |
| divide <<=1; |
| } |
| divide>>=1; |
| |
| /* now fine-tune the divider for best match */ |
| for(;divide<31;divide++) |
| if(freq >= ((ESS_SYSCLK>>(prescale+9))/(divide+1))) |
| break; |
| |
| /* divide = 0 is illegal, but don't let prescale = 4! */ |
| if(divide == 0) |
| { |
| divide++; |
| if(prescale>5) |
| prescale--; |
| } |
| |
| maestro_write(s, 6, 0x9000 | (prescale<<5) | divide); /* set reg */ |
| |
| /* Now set IDR 11/17 */ |
| maestro_write(s, 0x11, maestro_read(s, 0x11)|1); |
| maestro_write(s, 0x17, maestro_read(s, 0x17)|1); |
| } |
| /* --------------------------------------------------------------------- */ |
| |
| /* this quickly calculates the frequency needed for bob |
| and sets it if its different than what bob is |
| currently running at. its called often so |
| needs to be fairly quick. */ |
| #define BOB_MIN 50 |
| #define BOB_MAX 400 |
| static void calc_bob_rate(struct ess_state *s) { |
| #if 0 /* this thing tries to set the frequency of bob such that |
| there are 2 interrupts / buffer walked by the dac/adc. That |
| is probably very wrong for people who actually care about |
| mid buffer positioning. it should be calculated as bytes/interrupt |
| and that needs to be decided :) so for now just use the static 150 |
| in start_bob.*/ |
| |
| unsigned int dac_rate=2,adc_rate=1,newrate; |
| static int israte=-1; |
| |
| if (s->dma_dac.fragsize == 0) dac_rate = BOB_MIN; |
| else { |
| dac_rate = (2 * s->ratedac * sample_size[(s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK]) / |
| (s->dma_dac.fragsize) ; |
| } |
| |
| if (s->dma_adc.fragsize == 0) adc_rate = BOB_MIN; |
| else { |
| adc_rate = (2 * s->rateadc * sample_size[(s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK]) / |
| (s->dma_adc.fragsize) ; |
| } |
| |
| if(dac_rate > adc_rate) newrate = adc_rate; |
| else newrate=dac_rate; |
| |
| if(newrate > BOB_MAX) newrate = BOB_MAX; |
| else { |
| if(newrate < BOB_MIN) |
| newrate = BOB_MIN; |
| } |
| |
| if( israte != newrate) { |
| printk("dac: %d adc: %d rate: %d\n",dac_rate,adc_rate,israte); |
| israte=newrate; |
| } |
| #endif |
| |
| } |
| |
| static int |
| prog_dmabuf(struct ess_state *s, unsigned rec) |
| { |
| struct dmabuf *db = rec ? &s->dma_adc : &s->dma_dac; |
| unsigned rate = rec ? s->rateadc : s->ratedac; |
| unsigned bytepersec; |
| unsigned bufs; |
| unsigned char fmt; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&s->lock, flags); |
| fmt = s->fmt; |
| if (rec) { |
| stop_adc(s); |
| fmt >>= ESS_ADC_SHIFT; |
| } else { |
| stop_dac(s); |
| fmt >>= ESS_DAC_SHIFT; |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| fmt &= ESS_FMT_MASK; |
| |
| db->hwptr = db->swptr = db->total_bytes = db->count = db->error = db->endcleared = 0; |
| |
| /* this algorithm is a little nuts.. where did /1000 come from? */ |
| bytepersec = rate << sample_shift[fmt]; |
| bufs = PAGE_SIZE << db->buforder; |
| if (db->ossfragshift) { |
| if ((1000 << db->ossfragshift) < bytepersec) |
| db->fragshift = ld2(bytepersec/1000); |
| else |
| db->fragshift = db->ossfragshift; |
| } else { |
| db->fragshift = ld2(bytepersec/100/(db->subdivision ? db->subdivision : 1)); |
| if (db->fragshift < 3) |
| db->fragshift = 3; |
| } |
| db->numfrag = bufs >> db->fragshift; |
| while (db->numfrag < 4 && db->fragshift > 3) { |
| db->fragshift--; |
| db->numfrag = bufs >> db->fragshift; |
| } |
| db->fragsize = 1 << db->fragshift; |
| if (db->ossmaxfrags >= 4 && db->ossmaxfrags < db->numfrag) |
| db->numfrag = db->ossmaxfrags; |
| db->fragsamples = db->fragsize >> sample_shift[fmt]; |
| db->dmasize = db->numfrag << db->fragshift; |
| |
| M_printk("maestro: setup oss: numfrag: %d fragsize: %d dmasize: %d\n",db->numfrag,db->fragsize,db->dmasize); |
| |
| memset(db->rawbuf, (fmt & ESS_FMT_16BIT) ? 0 : 0x80, db->dmasize); |
| |
| spin_lock_irqsave(&s->lock, flags); |
| if (rec) |
| ess_rec_setup(s, fmt, s->rateadc, db->rawbuf, db->dmasize); |
| else |
| ess_play_setup(s, fmt, s->ratedac, db->rawbuf, db->dmasize); |
| |
| spin_unlock_irqrestore(&s->lock, flags); |
| db->ready = 1; |
| |
| return 0; |
| } |
| |
| static __inline__ void |
| clear_advance(struct ess_state *s) |
| { |
| unsigned char c = ((s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_16BIT) ? 0 : 0x80; |
| |
| unsigned char *buf = s->dma_dac.rawbuf; |
| unsigned bsize = s->dma_dac.dmasize; |
| unsigned bptr = s->dma_dac.swptr; |
| unsigned len = s->dma_dac.fragsize; |
| |
| if (bptr + len > bsize) { |
| unsigned x = bsize - bptr; |
| memset(buf + bptr, c, x); |
| /* account for wrapping? */ |
| bptr = 0; |
| len -= x; |
| } |
| memset(buf + bptr, c, len); |
| } |
| |
| /* call with spinlock held! */ |
| static void |
| ess_update_ptr(struct ess_state *s) |
| { |
| unsigned hwptr; |
| int diff; |
| |
| /* update ADC pointer */ |
| if (s->dma_adc.ready) { |
| /* oh boy should this all be re-written. everything in the current code paths think |
| that the various counters/pointers are expressed in bytes to the user but we have |
| two apus doing stereo stuff so we fix it up here.. it propagates to all the various |
| counters from here. */ |
| if ( s->fmt & (ESS_FMT_STEREO << ESS_ADC_SHIFT)) { |
| hwptr = (get_dmac(s)*2) % s->dma_adc.dmasize; |
| } else { |
| hwptr = get_dmac(s) % s->dma_adc.dmasize; |
| } |
| diff = (s->dma_adc.dmasize + hwptr - s->dma_adc.hwptr) % s->dma_adc.dmasize; |
| s->dma_adc.hwptr = hwptr; |
| s->dma_adc.total_bytes += diff; |
| s->dma_adc.count += diff; |
| if (s->dma_adc.count >= (signed)s->dma_adc.fragsize) |
| wake_up(&s->dma_adc.wait); |
| if (!s->dma_adc.mapped) { |
| if (s->dma_adc.count > (signed)(s->dma_adc.dmasize - ((3 * s->dma_adc.fragsize) >> 1))) { |
| /* FILL ME |
| wrindir(s, SV_CIENABLE, s->enable); */ |
| stop_adc(s); |
| /* brute force everyone back in sync, sigh */ |
| s->dma_adc.count = 0; |
| s->dma_adc.swptr = 0; |
| s->dma_adc.hwptr = 0; |
| s->dma_adc.error++; |
| } |
| } |
| } |
| /* update DAC pointer */ |
| if (s->dma_dac.ready) { |
| hwptr = get_dmaa(s) % s->dma_dac.dmasize; |
| /* the apu only reports the length it has seen, not the |
| length of the memory that has been used (the WP |
| knows that) */ |
| if ( ((s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK) == (ESS_FMT_STEREO|ESS_FMT_16BIT)) |
| hwptr<<=1; |
| |
| diff = (s->dma_dac.dmasize + hwptr - s->dma_dac.hwptr) % s->dma_dac.dmasize; |
| /* M_printk("updating dac: hwptr: %d diff: %d\n",hwptr,diff);*/ |
| s->dma_dac.hwptr = hwptr; |
| s->dma_dac.total_bytes += diff; |
| if (s->dma_dac.mapped) { |
| s->dma_dac.count += diff; |
| if (s->dma_dac.count >= (signed)s->dma_dac.fragsize) { |
| wake_up(&s->dma_dac.wait); |
| } |
| } else { |
| s->dma_dac.count -= diff; |
| /* M_printk("maestro: ess_update_ptr: diff: %d, count: %d\n", diff, s->dma_dac.count); */ |
| if (s->dma_dac.count <= 0) { |
| M_printk("underflow! diff: %d count: %d hw: %d sw: %d\n", diff, s->dma_dac.count, |
| hwptr, s->dma_dac.swptr); |
| /* FILL ME |
| wrindir(s, SV_CIENABLE, s->enable); */ |
| /* XXX how on earth can calling this with the lock held work.. */ |
| stop_dac(s); |
| /* brute force everyone back in sync, sigh */ |
| s->dma_dac.count = 0; |
| s->dma_dac.swptr = hwptr; |
| s->dma_dac.error++; |
| } else if (s->dma_dac.count <= (signed)s->dma_dac.fragsize && !s->dma_dac.endcleared) { |
| clear_advance(s); |
| s->dma_dac.endcleared = 1; |
| } |
| if (s->dma_dac.count + (signed)s->dma_dac.fragsize <= (signed)s->dma_dac.dmasize) { |
| wake_up(&s->dma_dac.wait); |
| /* printk("waking up DAC count: %d sw: %d hw: %d\n",s->dma_dac.count, s->dma_dac.swptr, |
| hwptr);*/ |
| } |
| } |
| } |
| } |
| |
| static irqreturn_t |
| ess_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct ess_state *s; |
| struct ess_card *c = (struct ess_card *)dev_id; |
| int i; |
| u32 event; |
| |
| if ( ! (event = inb(c->iobase+0x1A)) ) |
| return IRQ_NONE; |
| |
| outw(inw(c->iobase+4)&1, c->iobase+4); |
| |
| /* M_printk("maestro int: %x\n",event);*/ |
| if(event&(1<<6)) |
| { |
| int x; |
| enum {UP_EVT, DOWN_EVT, MUTE_EVT} vol_evt; |
| int volume; |
| |
| /* Figure out which volume control button was pushed, |
| based on differences from the default register |
| values. */ |
| x = inb(c->iobase+0x1c); |
| if (x&1) vol_evt = MUTE_EVT; |
| else if (((x>>1)&7) > 4) vol_evt = UP_EVT; |
| else vol_evt = DOWN_EVT; |
| |
| /* Reset the volume control registers. */ |
| outb(0x88, c->iobase+0x1c); |
| outb(0x88, c->iobase+0x1d); |
| outb(0x88, c->iobase+0x1e); |
| outb(0x88, c->iobase+0x1f); |
| |
| /* Deal with the button press in a hammer-handed |
| manner by adjusting the master mixer volume. */ |
| volume = c->mix.mixer_state[0] & 0xff; |
| if (vol_evt == UP_EVT) { |
| volume += 5; |
| if (volume > 100) |
| volume = 100; |
| } |
| else if (vol_evt == DOWN_EVT) { |
| volume -= 5; |
| if (volume < 0) |
| volume = 0; |
| } else { |
| /* vol_evt == MUTE_EVT */ |
| if (volume == 0) |
| volume = c->dock_mute_vol; |
| else { |
| c->dock_mute_vol = volume; |
| volume = 0; |
| } |
| } |
| set_mixer (c, 0, (volume << 8) | volume); |
| } |
| |
| /* Ack all the interrupts. */ |
| outb(0xFF, c->iobase+0x1A); |
| |
| /* |
| * Update the pointers for all APU's we are running. |
| */ |
| for(i=0;i<NR_DSPS;i++) |
| { |
| s=&c->channels[i]; |
| if(s->dev_audio == -1) |
| break; |
| spin_lock(&s->lock); |
| ess_update_ptr(s); |
| spin_unlock(&s->lock); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static const char invalid_magic[] = KERN_CRIT "maestro: invalid magic value in %s\n"; |
| |
| #define VALIDATE_MAGIC(FOO,MAG) \ |
| ({ \ |
| if (!(FOO) || (FOO)->magic != MAG) { \ |
| printk(invalid_magic,__FUNCTION__); \ |
| return -ENXIO; \ |
| } \ |
| }) |
| |
| #define VALIDATE_STATE(a) VALIDATE_MAGIC(a,ESS_STATE_MAGIC) |
| #define VALIDATE_CARD(a) VALIDATE_MAGIC(a,ESS_CARD_MAGIC) |
| |
| static void set_mixer(struct ess_card *card,unsigned int mixer, unsigned int val ) |
| { |
| unsigned int left,right; |
| /* cleanse input a little */ |
| right = ((val >> 8) & 0xff) ; |
| left = (val & 0xff) ; |
| |
| if(right > 100) right = 100; |
| if(left > 100) left = 100; |
| |
| card->mix.mixer_state[mixer]=(right << 8) | left; |
| card->mix.write_mixer(card,mixer,left,right); |
| } |
| |
| static void |
| mixer_push_state(struct ess_card *card) |
| { |
| int i; |
| for(i = 0 ; i < SOUND_MIXER_NRDEVICES ; i++) { |
| if( ! supported_mixer(card,i)) continue; |
| |
| set_mixer(card,i,card->mix.mixer_state[i]); |
| } |
| } |
| |
| static int mixer_ioctl(struct ess_card *card, unsigned int cmd, unsigned long arg) |
| { |
| int i, val=0; |
| unsigned long flags; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| |
| VALIDATE_CARD(card); |
| if (cmd == SOUND_MIXER_INFO) { |
| mixer_info info; |
| memset(&info, 0, sizeof(info)); |
| strlcpy(info.id, card_names[card->card_type], sizeof(info.id)); |
| strlcpy(info.name, card_names[card->card_type], sizeof(info.name)); |
| info.modify_counter = card->mix.modcnt; |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == SOUND_OLD_MIXER_INFO) { |
| _old_mixer_info info; |
| memset(&info, 0, sizeof(info)); |
| strlcpy(info.id, card_names[card->card_type], sizeof(info.id)); |
| strlcpy(info.name, card_names[card->card_type], sizeof(info.name)); |
| if (copy_to_user(argp, &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| if (cmd == OSS_GETVERSION) |
| return put_user(SOUND_VERSION, p); |
| |
| if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int)) |
| return -EINVAL; |
| |
| if (_IOC_DIR(cmd) == _IOC_READ) { |
| switch (_IOC_NR(cmd)) { |
| case SOUND_MIXER_RECSRC: /* give them the current record source */ |
| |
| if(!card->mix.recmask_io) { |
| val = 0; |
| } else { |
| spin_lock_irqsave(&card->lock, flags); |
| val = card->mix.recmask_io(card,1,0); |
| spin_unlock_irqrestore(&card->lock, flags); |
| } |
| break; |
| |
| case SOUND_MIXER_DEVMASK: /* give them the supported mixers */ |
| val = card->mix.supported_mixers; |
| break; |
| |
| case SOUND_MIXER_RECMASK: /* Arg contains a bit for each supported recording source */ |
| val = card->mix.record_sources; |
| break; |
| |
| case SOUND_MIXER_STEREODEVS: /* Mixer channels supporting stereo */ |
| val = card->mix.stereo_mixers; |
| break; |
| |
| case SOUND_MIXER_CAPS: |
| val = SOUND_CAP_EXCL_INPUT; |
| break; |
| |
| default: /* read a specific mixer */ |
| i = _IOC_NR(cmd); |
| |
| if ( ! supported_mixer(card,i)) |
| return -EINVAL; |
| |
| /* do we ever want to touch the hardware? */ |
| /* spin_lock_irqsave(&card->lock, flags); |
| val = card->mix.read_mixer(card,i); |
| spin_unlock_irqrestore(&card->lock, flags);*/ |
| |
| val = card->mix.mixer_state[i]; |
| /* M_printk("returned 0x%x for mixer %d\n",val,i);*/ |
| |
| break; |
| } |
| return put_user(val, p); |
| } |
| |
| if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ)) |
| return -EINVAL; |
| |
| card->mix.modcnt++; |
| |
| if (get_user(val, p)) |
| return -EFAULT; |
| |
| switch (_IOC_NR(cmd)) { |
| case SOUND_MIXER_RECSRC: /* Arg contains a bit for each recording source */ |
| |
| if (!card->mix.recmask_io) return -EINVAL; |
| if(!val) return 0; |
| if(! (val &= card->mix.record_sources)) return -EINVAL; |
| |
| spin_lock_irqsave(&card->lock, flags); |
| card->mix.recmask_io(card,0,val); |
| spin_unlock_irqrestore(&card->lock, flags); |
| return 0; |
| |
| default: |
| i = _IOC_NR(cmd); |
| |
| if ( ! supported_mixer(card,i)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&card->lock, flags); |
| set_mixer(card,i,val); |
| spin_unlock_irqrestore(&card->lock, flags); |
| |
| return 0; |
| } |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| static int ess_open_mixdev(struct inode *inode, struct file *file) |
| { |
| unsigned int minor = iminor(inode); |
| struct ess_card *card = NULL; |
| struct pci_dev *pdev = NULL; |
| struct pci_driver *drvr; |
| |
| while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) { |
| drvr = pci_dev_driver (pdev); |
| if (drvr == &maestro_pci_driver) { |
| card = (struct ess_card*)pci_get_drvdata (pdev); |
| if (!card) |
| continue; |
| if (card->dev_mixer == minor) |
| break; |
| } |
| } |
| if (!card) |
| return -ENODEV; |
| file->private_data = card; |
| return nonseekable_open(inode, file); |
| } |
| |
| static int ess_release_mixdev(struct inode *inode, struct file *file) |
| { |
| struct ess_card *card = (struct ess_card *)file->private_data; |
| |
| VALIDATE_CARD(card); |
| |
| return 0; |
| } |
| |
| static int ess_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct ess_card *card = (struct ess_card *)file->private_data; |
| |
| VALIDATE_CARD(card); |
| |
| return mixer_ioctl(card, cmd, arg); |
| } |
| |
| static /*const*/ struct file_operations ess_mixer_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .ioctl = ess_ioctl_mixdev, |
| .open = ess_open_mixdev, |
| .release = ess_release_mixdev, |
| }; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static int drain_dac(struct ess_state *s, int nonblock) |
| { |
| DECLARE_WAITQUEUE(wait,current); |
| unsigned long flags; |
| int count; |
| signed long tmo; |
| |
| if (s->dma_dac.mapped || !s->dma_dac.ready) |
| return 0; |
| current->state = TASK_INTERRUPTIBLE; |
| add_wait_queue(&s->dma_dac.wait, &wait); |
| for (;;) { |
| /* XXX uhm.. questionable locking*/ |
| spin_lock_irqsave(&s->lock, flags); |
| count = s->dma_dac.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (count <= 0) |
| break; |
| if (signal_pending(current)) |
| break; |
| if (nonblock) { |
| remove_wait_queue(&s->dma_dac.wait, &wait); |
| current->state = TASK_RUNNING; |
| return -EBUSY; |
| } |
| tmo = (count * HZ) / s->ratedac; |
| tmo >>= sample_shift[(s->fmt >> ESS_DAC_SHIFT) & ESS_FMT_MASK]; |
| /* XXX this is just broken. someone is waking us up alot, or schedule_timeout is broken. |
| or something. who cares. - zach */ |
| if (!schedule_timeout(tmo ? tmo : 1) && tmo) |
| M_printk(KERN_DEBUG "maestro: dma timed out?? %ld\n",jiffies); |
| } |
| remove_wait_queue(&s->dma_dac.wait, &wait); |
| current->state = TASK_RUNNING; |
| if (signal_pending(current)) |
| return -ERESTARTSYS; |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| /* Zach sez: "god this is gross.." */ |
| static int |
| comb_stereo(unsigned char *real_buffer,unsigned char *tmp_buffer, int offset, |
| int count, int bufsize) |
| { |
| /* No such thing as stereo recording, so we |
| use dual input mixers. which means we have to |
| combine mono to stereo buffer. yuck. |
| |
| but we don't have to be able to work a byte at a time..*/ |
| |
| unsigned char *so,*left,*right; |
| int i; |
| |
| so = tmp_buffer; |
| left = real_buffer + offset; |
| right = real_buffer + bufsize/2 + offset; |
| |
| /* M_printk("comb_stereo writing %d to %p from %p and %p, offset: %d size: %d\n",count/2, tmp_buffer,left,right,offset,bufsize);*/ |
| |
| for(i=count/4; i ; i--) { |
| (*(so+2)) = *(right++); |
| (*(so+3)) = *(right++); |
| (*so) = *(left++); |
| (*(so+1)) = *(left++); |
| so+=4; |
| } |
| |
| return 0; |
| } |
| |
| /* in this loop, dma_adc.count signifies the amount of data thats waiting |
| to be copied to the user's buffer. it is filled by the interrupt |
| handler and drained by this loop. */ |
| static ssize_t |
| ess_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) |
| { |
| struct ess_state *s = (struct ess_state *)file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned swptr; |
| int cnt; |
| unsigned char *combbuf = NULL; |
| |
| VALIDATE_STATE(s); |
| if (s->dma_adc.mapped) |
| return -ENXIO; |
| if (!s->dma_adc.ready && (ret = prog_dmabuf(s, 1))) |
| return ret; |
| if (!access_ok(VERIFY_WRITE, buffer, count)) |
| return -EFAULT; |
| if(!(combbuf = kmalloc(count,GFP_KERNEL))) |
| return -ENOMEM; |
| ret = 0; |
| |
| calc_bob_rate(s); |
| |
| while (count > 0) { |
| spin_lock_irqsave(&s->lock, flags); |
| /* remember, all these things are expressed in bytes to be |
| sent to the user.. hence the evil / 2 down below */ |
| swptr = s->dma_adc.swptr; |
| cnt = s->dma_adc.dmasize-swptr; |
| if (s->dma_adc.count < cnt) |
| cnt = s->dma_adc.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| |
| if (cnt > count) |
| cnt = count; |
| |
| if ( cnt > 0 ) cnt &= ~3; |
| |
| if (cnt <= 0) { |
| start_adc(s); |
| if (file->f_flags & O_NONBLOCK) |
| { |
| ret = ret ? ret : -EAGAIN; |
| goto rec_return_free; |
| } |
| if (!interruptible_sleep_on_timeout(&s->dma_adc.wait, HZ)) { |
| if(! s->card->in_suspend) printk(KERN_DEBUG "maestro: read: chip lockup? dmasz %u fragsz %u count %i hwptr %u swptr %u\n", |
| s->dma_adc.dmasize, s->dma_adc.fragsize, s->dma_adc.count, |
| s->dma_adc.hwptr, s->dma_adc.swptr); |
| stop_adc(s); |
| spin_lock_irqsave(&s->lock, flags); |
| set_dmac(s, virt_to_bus(s->dma_adc.rawbuf), s->dma_adc.numfrag << s->dma_adc.fragshift); |
| /* program enhanced mode registers */ |
| /* FILL ME */ |
| /* wrindir(s, SV_CIDMACBASECOUNT1, (s->dma_adc.fragsamples-1) >> 8); |
| wrindir(s, SV_CIDMACBASECOUNT0, s->dma_adc.fragsamples-1); */ |
| s->dma_adc.count = s->dma_adc.hwptr = s->dma_adc.swptr = 0; |
| spin_unlock_irqrestore(&s->lock, flags); |
| } |
| if (signal_pending(current)) |
| { |
| ret = ret ? ret : -ERESTARTSYS; |
| goto rec_return_free; |
| } |
| continue; |
| } |
| |
| if(s->fmt & (ESS_FMT_STEREO << ESS_ADC_SHIFT)) { |
| /* swptr/2 so that we know the real offset in each apu's buffer */ |
| comb_stereo(s->dma_adc.rawbuf,combbuf,swptr/2,cnt,s->dma_adc.dmasize); |
| if (copy_to_user(buffer, combbuf, cnt)) { |
| ret = ret ? ret : -EFAULT; |
| goto rec_return_free; |
| } |
| } else { |
| if (copy_to_user(buffer, s->dma_adc.rawbuf + swptr, cnt)) { |
| ret = ret ? ret : -EFAULT; |
| goto rec_return_free; |
| } |
| } |
| |
| swptr = (swptr + cnt) % s->dma_adc.dmasize; |
| spin_lock_irqsave(&s->lock, flags); |
| s->dma_adc.swptr = swptr; |
| s->dma_adc.count -= cnt; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| start_adc(s); |
| } |
| |
| rec_return_free: |
| kfree(combbuf); |
| return ret; |
| } |
| |
| static ssize_t |
| ess_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) |
| { |
| struct ess_state *s = (struct ess_state *)file->private_data; |
| ssize_t ret; |
| unsigned long flags; |
| unsigned swptr; |
| int cnt; |
| |
| VALIDATE_STATE(s); |
| if (s->dma_dac.mapped) |
| return -ENXIO; |
| if (!s->dma_dac.ready && (ret = prog_dmabuf(s, 0))) |
| return ret; |
| if (!access_ok(VERIFY_READ, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| |
| calc_bob_rate(s); |
| |
| while (count > 0) { |
| spin_lock_irqsave(&s->lock, flags); |
| |
| if (s->dma_dac.count < 0) { |
| s->dma_dac.count = 0; |
| s->dma_dac.swptr = s->dma_dac.hwptr; |
| } |
| swptr = s->dma_dac.swptr; |
| |
| cnt = s->dma_dac.dmasize-swptr; |
| |
| if (s->dma_dac.count + cnt > s->dma_dac.dmasize) |
| cnt = s->dma_dac.dmasize - s->dma_dac.count; |
| |
| spin_unlock_irqrestore(&s->lock, flags); |
| |
| if (cnt > count) |
| cnt = count; |
| |
| if (cnt <= 0) { |
| start_dac(s); |
| if (file->f_flags & O_NONBLOCK) { |
| if(!ret) ret = -EAGAIN; |
| goto return_free; |
| } |
| if (!interruptible_sleep_on_timeout(&s->dma_dac.wait, HZ)) { |
| if(! s->card->in_suspend) printk(KERN_DEBUG "maestro: write: chip lockup? dmasz %u fragsz %u count %i hwptr %u swptr %u\n", |
| s->dma_dac.dmasize, s->dma_dac.fragsize, s->dma_dac.count, |
| s->dma_dac.hwptr, s->dma_dac.swptr); |
| stop_dac(s); |
| spin_lock_irqsave(&s->lock, flags); |
| set_dmaa(s, virt_to_bus(s->dma_dac.rawbuf), s->dma_dac.numfrag << s->dma_dac.fragshift); |
| /* program enhanced mode registers */ |
| /* wrindir(s, SV_CIDMAABASECOUNT1, (s->dma_dac.fragsamples-1) >> 8); |
| wrindir(s, SV_CIDMAABASECOUNT0, s->dma_dac.fragsamples-1); */ |
| /* FILL ME */ |
| s->dma_dac.count = s->dma_dac.hwptr = s->dma_dac.swptr = 0; |
| spin_unlock_irqrestore(&s->lock, flags); |
| } |
| if (signal_pending(current)) { |
| if (!ret) ret = -ERESTARTSYS; |
| goto return_free; |
| } |
| continue; |
| } |
| if (copy_from_user(s->dma_dac.rawbuf + swptr, buffer, cnt)) { |
| if (!ret) ret = -EFAULT; |
| goto return_free; |
| } |
| /* printk("wrote %d bytes at sw: %d cnt: %d while hw: %d\n",cnt, swptr, s->dma_dac.count, s->dma_dac.hwptr);*/ |
| |
| swptr = (swptr + cnt) % s->dma_dac.dmasize; |
| |
| spin_lock_irqsave(&s->lock, flags); |
| s->dma_dac.swptr = swptr; |
| s->dma_dac.count += cnt; |
| s->dma_dac.endcleared = 0; |
| spin_unlock_irqrestore(&s->lock, flags); |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| start_dac(s); |
| } |
| return_free: |
| return ret; |
| } |
| |
| /* No kernel lock - we have our own spinlock */ |
| static unsigned int ess_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct ess_state *s = (struct ess_state *)file->private_data; |
| unsigned long flags; |
| unsigned int mask = 0; |
| |
| VALIDATE_STATE(s); |
| |
| /* In 0.14 prog_dmabuf always returns success anyway ... */ |
| if (file->f_mode & FMODE_WRITE) { |
| if (!s->dma_dac.ready && prog_dmabuf(s, 0)) |
| return 0; |
| } |
| if (file->f_mode & FMODE_READ) { |
| if (!s->dma_adc.ready && prog_dmabuf(s, 1)) |
| return 0; |
| } |
| |
| if (file->f_mode & FMODE_WRITE) |
| poll_wait(file, &s->dma_dac.wait, wait); |
| if (file->f_mode & FMODE_READ) |
| poll_wait(file, &s->dma_adc.wait, wait); |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| if (file->f_mode & FMODE_READ) { |
| if (s->dma_adc.count >= (signed)s->dma_adc.fragsize) |
| mask |= POLLIN | POLLRDNORM; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| if (s->dma_dac.mapped) { |
| if (s->dma_dac.count >= (signed)s->dma_dac.fragsize) |
| mask |= POLLOUT | POLLWRNORM; |
| } else { |
| if ((signed)s->dma_dac.dmasize >= s->dma_dac.count + (signed)s->dma_dac.fragsize) |
| mask |= POLLOUT | POLLWRNORM; |
| } |
| } |
| spin_unlock_irqrestore(&s->lock, flags); |
| return mask; |
| } |
| |
| static int ess_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct ess_state *s = (struct ess_state *)file->private_data; |
| struct dmabuf *db; |
| int ret = -EINVAL; |
| unsigned long size; |
| |
| VALIDATE_STATE(s); |
| lock_kernel(); |
| if (vma->vm_flags & VM_WRITE) { |
| if ((ret = prog_dmabuf(s, 1)) != 0) |
| goto out; |
| db = &s->dma_dac; |
| } else |
| #if 0 |
| /* if we can have the wp/wc do the combining |
| we can turn this back on. */ |
| if (vma->vm_flags & VM_READ) { |
| if ((ret = prog_dmabuf(s, 0)) != 0) |
| goto out; |
| db = &s->dma_adc; |
| } else |
| #endif |
| goto out; |
| ret = -EINVAL; |
| if (vma->vm_pgoff != 0) |
| goto out; |
| size = vma->vm_end - vma->vm_start; |
| if (size > (PAGE_SIZE << db->buforder)) |
| goto out; |
| ret = -EAGAIN; |
| if (remap_pfn_range(vma, vma->vm_start, |
| virt_to_phys(db->rawbuf) >> PAGE_SHIFT, |
| size, vma->vm_page_prot)) |
| goto out; |
| db->mapped = 1; |
| ret = 0; |
| out: |
| unlock_kernel(); |
| return ret; |
| } |
| |
| static int ess_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct ess_state *s = (struct ess_state *)file->private_data; |
| unsigned long flags; |
| audio_buf_info abinfo; |
| count_info cinfo; |
| int val, mapped, ret; |
| unsigned char fmtm, fmtd; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| |
| /* printk("maestro: ess_ioctl: cmd %d\n", cmd);*/ |
| |
| VALIDATE_STATE(s); |
| mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) || |
| ((file->f_mode & FMODE_READ) && s->dma_adc.mapped); |
| switch (cmd) { |
| case OSS_GETVERSION: |
| return put_user(SOUND_VERSION, p); |
| |
| case SNDCTL_DSP_SYNC: |
| if (file->f_mode & FMODE_WRITE) |
| return drain_dac(s, file->f_flags & O_NONBLOCK); |
| return 0; |
| |
| case SNDCTL_DSP_SETDUPLEX: |
| /* XXX fix */ |
| return 0; |
| |
| case SNDCTL_DSP_GETCAPS: |
| return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER | DSP_CAP_MMAP, p); |
| |
| case SNDCTL_DSP_RESET: |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| synchronize_irq(s->card->pcidev->irq); |
| s->dma_dac.swptr = s->dma_dac.hwptr = s->dma_dac.count = s->dma_dac.total_bytes = 0; |
| } |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| synchronize_irq(s->card->pcidev->irq); |
| s->dma_adc.swptr = s->dma_adc.hwptr = s->dma_adc.count = s->dma_adc.total_bytes = 0; |
| } |
| return 0; |
| |
| case SNDCTL_DSP_SPEED: |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val >= 0) { |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| set_adc_rate(s, val); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| set_dac_rate(s, val); |
| } |
| } |
| return put_user((file->f_mode & FMODE_READ) ? s->rateadc : s->ratedac, p); |
| |
| case SNDCTL_DSP_STEREO: |
| if (get_user(val, p)) |
| return -EFAULT; |
| fmtd = 0; |
| fmtm = ~0; |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| if (val) |
| fmtd |= ESS_FMT_STEREO << ESS_ADC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_STEREO << ESS_ADC_SHIFT); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| if (val) |
| fmtd |= ESS_FMT_STEREO << ESS_DAC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_STEREO << ESS_DAC_SHIFT); |
| } |
| set_fmt(s, fmtm, fmtd); |
| return 0; |
| |
| case SNDCTL_DSP_CHANNELS: |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val != 0) { |
| fmtd = 0; |
| fmtm = ~0; |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| if (val >= 2) |
| fmtd |= ESS_FMT_STEREO << ESS_ADC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_STEREO << ESS_ADC_SHIFT); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| if (val >= 2) |
| fmtd |= ESS_FMT_STEREO << ESS_DAC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_STEREO << ESS_DAC_SHIFT); |
| } |
| set_fmt(s, fmtm, fmtd); |
| } |
| return put_user((s->fmt & ((file->f_mode & FMODE_READ) ? (ESS_FMT_STEREO << ESS_ADC_SHIFT) |
| : (ESS_FMT_STEREO << ESS_DAC_SHIFT))) ? 2 : 1, p); |
| |
| case SNDCTL_DSP_GETFMTS: /* Returns a mask */ |
| return put_user(AFMT_U8|AFMT_S16_LE, p); |
| |
| case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val != AFMT_QUERY) { |
| fmtd = 0; |
| fmtm = ~0; |
| if (file->f_mode & FMODE_READ) { |
| stop_adc(s); |
| s->dma_adc.ready = 0; |
| /* fixed at 16bit for now */ |
| fmtd |= ESS_FMT_16BIT << ESS_ADC_SHIFT; |
| #if 0 |
| if (val == AFMT_S16_LE) |
| fmtd |= ESS_FMT_16BIT << ESS_ADC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_16BIT << ESS_ADC_SHIFT); |
| #endif |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| stop_dac(s); |
| s->dma_dac.ready = 0; |
| if (val == AFMT_S16_LE) |
| fmtd |= ESS_FMT_16BIT << ESS_DAC_SHIFT; |
| else |
| fmtm &= ~(ESS_FMT_16BIT << ESS_DAC_SHIFT); |
| } |
| set_fmt(s, fmtm, fmtd); |
| } |
| return put_user((s->fmt & ((file->f_mode & FMODE_READ) ? |
| (ESS_FMT_16BIT << ESS_ADC_SHIFT) |
| : (ESS_FMT_16BIT << ESS_DAC_SHIFT))) ? |
| AFMT_S16_LE : |
| AFMT_U8, |
| p); |
| |
| case SNDCTL_DSP_POST: |
| return 0; |
| |
| case SNDCTL_DSP_GETTRIGGER: |
| val = 0; |
| if ((file->f_mode & FMODE_READ) && (s->enable & ADC_RUNNING)) |
| val |= PCM_ENABLE_INPUT; |
| if ((file->f_mode & FMODE_WRITE) && (s->enable & DAC_RUNNING)) |
| val |= PCM_ENABLE_OUTPUT; |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_SETTRIGGER: |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (file->f_mode & FMODE_READ) { |
| if (val & PCM_ENABLE_INPUT) { |
| if (!s->dma_adc.ready && (ret = prog_dmabuf(s, 1))) |
| return ret; |
| start_adc(s); |
| } else |
| stop_adc(s); |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| if (val & PCM_ENABLE_OUTPUT) { |
| if (!s->dma_dac.ready && (ret = prog_dmabuf(s, 0))) |
| return ret; |
| start_dac(s); |
| } else |
| stop_dac(s); |
| } |
| return 0; |
| |
| case SNDCTL_DSP_GETOSPACE: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if (!s->dma_dac.ready && (ret = prog_dmabuf(s, 0))) |
| return ret; |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| abinfo.fragsize = s->dma_dac.fragsize; |
| abinfo.bytes = s->dma_dac.dmasize - s->dma_dac.count; |
| abinfo.fragstotal = s->dma_dac.numfrag; |
| abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift; |
| spin_unlock_irqrestore(&s->lock, flags); |
| return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; |
| |
| case SNDCTL_DSP_GETISPACE: |
| if (!(file->f_mode & FMODE_READ)) |
| return -EINVAL; |
| if (!s->dma_adc.ready && (ret = prog_dmabuf(s, 1))) |
| return ret; |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| abinfo.fragsize = s->dma_adc.fragsize; |
| abinfo.bytes = s->dma_adc.count; |
| abinfo.fragstotal = s->dma_adc.numfrag; |
| abinfo.fragments = abinfo.bytes >> s->dma_adc.fragshift; |
| spin_unlock_irqrestore(&s->lock, flags); |
| return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; |
| |
| case SNDCTL_DSP_NONBLOCK: |
| file->f_flags |= O_NONBLOCK; |
| return 0; |
| |
| case SNDCTL_DSP_GETODELAY: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if (!s->dma_dac.ready && (ret = prog_dmabuf(s, 0))) |
| return ret; |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| val = s->dma_dac.count; |
| spin_unlock_irqrestore(&s->lock, flags); |
| return put_user(val, p); |
| |
| case SNDCTL_DSP_GETIPTR: |
| if (!(file->f_mode & FMODE_READ)) |
| return -EINVAL; |
| if (!s->dma_adc.ready && (ret = prog_dmabuf(s, 1))) |
| return ret; |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| cinfo.bytes = s->dma_adc.total_bytes; |
| cinfo.blocks = s->dma_adc.count >> s->dma_adc.fragshift; |
| cinfo.ptr = s->dma_adc.hwptr; |
| if (s->dma_adc.mapped) |
| s->dma_adc.count &= s->dma_adc.fragsize-1; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (copy_to_user(argp, &cinfo, sizeof(cinfo))) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETOPTR: |
| if (!(file->f_mode & FMODE_WRITE)) |
| return -EINVAL; |
| if (!s->dma_dac.ready && (ret = prog_dmabuf(s, 0))) |
| return ret; |
| spin_lock_irqsave(&s->lock, flags); |
| ess_update_ptr(s); |
| cinfo.bytes = s->dma_dac.total_bytes; |
| cinfo.blocks = s->dma_dac.count >> s->dma_dac.fragshift; |
| cinfo.ptr = s->dma_dac.hwptr; |
| if (s->dma_dac.mapped) |
| s->dma_dac.count &= s->dma_dac.fragsize-1; |
| spin_unlock_irqrestore(&s->lock, flags); |
| if (copy_to_user(argp, &cinfo, sizeof(cinfo))) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETBLKSIZE: |
| if (file->f_mode & FMODE_WRITE) { |
| if ((val = prog_dmabuf(s, 0))) |
| return val; |
| return put_user(s->dma_dac.fragsize, p); |
| } |
| if ((val = prog_dmabuf(s, 1))) |
| return val; |
| return put_user(s->dma_adc.fragsize, p); |
| |
| case SNDCTL_DSP_SETFRAGMENT: |
| if (get_user(val, p)) |
| return -EFAULT; |
| M_printk("maestro: SETFRAGMENT: %0x\n",val); |
| if (file->f_mode & FMODE_READ) { |
| s->dma_adc.ossfragshift = val & 0xffff; |
| s->dma_adc.ossmaxfrags = (val >> 16) & 0xffff; |
| if (s->dma_adc.ossfragshift < 4) |
| s->dma_adc.ossfragshift = 4; |
| if (s->dma_adc.ossfragshift > 15) |
| s->dma_adc.ossfragshift = 15; |
| if (s->dma_adc.ossmaxfrags < 4) |
| s->dma_adc.ossmaxfrags = 4; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| s->dma_dac.ossfragshift = val & 0xffff; |
| s->dma_dac.ossmaxfrags = (val >> 16) & 0xffff; |
| if (s->dma_dac.ossfragshift < 4) |
| s->dma_dac.ossfragshift = 4; |
| if (s->dma_dac.ossfragshift > 15) |
| s->dma_dac.ossfragshift = 15; |
| if (s->dma_dac.ossmaxfrags < 4) |
| s->dma_dac.ossmaxfrags = 4; |
| } |
| return 0; |
| |
| case SNDCTL_DSP_SUBDIVIDE: |
| if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) || |
| (file->f_mode & FMODE_WRITE && s->dma_dac.subdivision)) |
| return -EINVAL; |
| if (get_user(val, p)) |
| return -EFAULT; |
| if (val != 1 && val != 2 && val != 4) |
| return -EINVAL; |
| if (file->f_mode & FMODE_READ) |
| s->dma_adc.subdivision = val; |
| if (file->f_mode & FMODE_WRITE) |
| s->dma_dac.subdivision = val; |
| return 0; |
| |
| case SOUND_PCM_READ_RATE: |
| return put_user((file->f_mode & FMODE_READ) ? s->rateadc : s->ratedac, p); |
| |
| case SOUND_PCM_READ_CHANNELS: |
| return put_user((s->fmt & ((file->f_mode & FMODE_READ) ? (ESS_FMT_STEREO << ESS_ADC_SHIFT) |
| : (ESS_FMT_STEREO << ESS_DAC_SHIFT))) ? 2 : 1, p); |
| |
| case SOUND_PCM_READ_BITS: |
| return put_user((s->fmt & ((file->f_mode & FMODE_READ) ? (ESS_FMT_16BIT << ESS_ADC_SHIFT) |
| : (ESS_FMT_16BIT << ESS_DAC_SHIFT))) ? 16 : 8, p); |
| |
| case SOUND_PCM_WRITE_FILTER: |
| case SNDCTL_DSP_SETSYNCRO: |
| case SOUND_PCM_READ_FILTER: |
| return -EINVAL; |
| |
| } |
| return -EINVAL; |
| } |
| |
| static void |
| set_base_registers(struct ess_state *s,void *vaddr) |
| { |
| unsigned long packed_phys = virt_to_bus(vaddr)>>12; |
| wave_set_register(s, 0x01FC , packed_phys); |
| wave_set_register(s, 0x01FD , packed_phys); |
| |