blob: 043302b7fe589d7eabc873d7d5172c05c6473381 [file] [log] [blame]
/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1200/Db1200 board setup.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
#include <linux/ide.h>
#endif
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_ETH_INT DB1200_ETH_INT
#define PB1200_IDE_INT DB1200_IDE_INT
#endif
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
void board_reset (void)
{
bcsr->resets = 0;
bcsr->system = 0;
}
void __init board_setup(void)
{
char *argptr = NULL;
u32 pin_func;
#if 0
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
#endif
#if defined(CONFIG_I2C_AU1550)
{
u32 freq0, clksrc;
/* Select SMBUS in CPLD */
bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func &= ~(3<<17 | 1<<4);
/* Set GPIOs correctly */
pin_func |= 2<<17;
au_writel(pin_func, SYS_PINFUNC);
au_sync();
/* The i2c driver depends on 50Mhz clock */
freq0 = au_readl(SYS_FREQCTRL0);
au_sync();
freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
freq0 |= (3<<SYS_FC_FRDIV1_BIT);
/* 396Mhz / (3+1)*2 == 49.5Mhz */
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
freq0 |= SYS_FC_FE1;
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
clksrc = au_readl(SYS_CLKSRC);
au_sync();
clksrc &= ~0x01f00000;
/* bit 22 is EXTCLK0 for PSC0 */
clksrc |= (0x3 << 22);
au_writel(clksrc, SYS_CLKSRC);
au_sync();
}
#endif
#ifdef CONFIG_FB_AU1200
argptr = prom_getcmdline();
#ifdef CONFIG_MIPS_PB1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
#ifdef CONFIG_MIPS_DB1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
#endif
/* The Pb1200 development board uses external MUX for PSC0 to
support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
*/
#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
Refer to Pb1200/Db1200 documentation.
#elif defined( CONFIG_AU1XXX_PSC_SPI )
bcsr->resets |= BCSR_RESETS_PCS0MUX;
/*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
bcsr->resets =0x900f;
#elif defined( CONFIG_I2C_AU1550 )
bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
printk("AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
printk("AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
int
board_au1200fb_panel (void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
p = bcsr->switches;
p >>= 8;
p &= 0x0F;
return p;
}
int
board_au1200fb_panel_init (void)
{
/* Apply power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
/*printk("board_au1200fb_panel_init()\n"); */
return 0;
}
int
board_au1200fb_panel_shutdown (void)
{
/* Remove power */
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
/*printk("board_au1200fb_panel_shutdown()\n"); */
return 0;
}