| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (C) 2021 BSH Hausgeraete GmbH |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/input/input.h> |
| #include "imx6ulz.dtsi" |
| |
| / { |
| model = "BSH SMM M2"; |
| compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz"; |
| |
| chosen { |
| stdout-path = &uart4; |
| }; |
| |
| usdhc2_pwrseq: usdhc2-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| nand-on-flash-bbt; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| uart-has-rtscts; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "brcm,bcm4330-bt"; |
| max-speed = <3000000>; |
| shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; |
| host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| dr_mode = "peripheral"; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbphy1 { |
| fsl,tx-d-cal = <106>; |
| }; |
| |
| &usdhc2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wlan>; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| cap-power-off-card; |
| keep-power-in-suspend; |
| cap-sdio-irq; |
| mmc-pwrseq = <&usdhc2_pwrseq>; |
| status = "okay"; |
| |
| brcmf: wifi@1 { |
| reg = <1>; |
| compatible = "brcm,bcm4329-fmac"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "host-wake"; |
| }; |
| }; |
| |
| &wdog1 { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_gpmi_nand: gpmi-nand { |
| fsl,pins = < |
| MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 |
| MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 |
| MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 |
| MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 |
| MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 |
| MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 |
| MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 |
| MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 |
| MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 |
| MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 |
| MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 |
| MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 |
| MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 |
| MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 |
| MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b099 |
| MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 |
| MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b099 |
| MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 /* BT_REG_ON */ |
| MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x100b1 /* BT_DEV_WAKE out */ |
| MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BT_HOST_WAKE in */ |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_wlan: wlangrp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 |
| MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10059 |
| MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 |
| MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 |
| MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 |
| MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 |
| MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x79 /* WL_REG_ON */ |
| MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */ |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */ |
| MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x4001b031 /* OSC 32Khz wifi clk in */ |
| >; |
| }; |
| }; |
