|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * AD7766/AD7767 SPI ADC driver | 
|  | * | 
|  | * Copyright 2016 Analog Devices Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spi/spi.h> | 
|  |  | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/buffer.h> | 
|  | #include <linux/iio/trigger.h> | 
|  | #include <linux/iio/trigger_consumer.h> | 
|  | #include <linux/iio/triggered_buffer.h> | 
|  |  | 
|  | struct ad7766_chip_info { | 
|  | unsigned int decimation_factor; | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | AD7766_SUPPLY_AVDD = 0, | 
|  | AD7766_SUPPLY_DVDD = 1, | 
|  | AD7766_SUPPLY_VREF = 2, | 
|  | AD7766_NUM_SUPPLIES = 3 | 
|  | }; | 
|  |  | 
|  | struct ad7766 { | 
|  | const struct ad7766_chip_info *chip_info; | 
|  | struct spi_device *spi; | 
|  | struct clk *mclk; | 
|  | struct gpio_desc *pd_gpio; | 
|  | struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES]; | 
|  |  | 
|  | struct iio_trigger *trig; | 
|  |  | 
|  | struct spi_transfer xfer; | 
|  | struct spi_message msg; | 
|  |  | 
|  | /* | 
|  | * DMA (thus cache coherency maintenance) requires the | 
|  | * transfer buffers to live in their own cache lines. | 
|  | * Make the buffer large enough for one 24 bit sample and one 64 bit | 
|  | * aligned 64 bit timestamp. | 
|  | */ | 
|  | unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)] | 
|  | ____cacheline_aligned; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * AD7766 and AD7767 variations are interface compatible, the main difference is | 
|  | * analog performance. Both parts will use the same ID. | 
|  | */ | 
|  | enum ad7766_device_ids { | 
|  | ID_AD7766, | 
|  | ID_AD7766_1, | 
|  | ID_AD7766_2, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t ad7766_trigger_handler(int irq, void *p) | 
|  | { | 
|  | struct iio_poll_func *pf = p; | 
|  | struct iio_dev *indio_dev = pf->indio_dev; | 
|  | struct ad7766 *ad7766 = iio_priv(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | ret = spi_sync(ad7766->spi, &ad7766->msg); | 
|  | if (ret < 0) | 
|  | goto done; | 
|  |  | 
|  | iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data, | 
|  | pf->timestamp); | 
|  | done: | 
|  | iio_trigger_notify_done(indio_dev->trig); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int ad7766_preenable(struct iio_dev *indio_dev) | 
|  | { | 
|  | struct ad7766 *ad7766 = iio_priv(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | 
|  | if (ret < 0) { | 
|  | dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(ad7766->mclk); | 
|  | if (ret < 0) { | 
|  | dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret); | 
|  | regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | gpiod_set_value(ad7766->pd_gpio, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ad7766_postdisable(struct iio_dev *indio_dev) | 
|  | { | 
|  | struct ad7766 *ad7766 = iio_priv(indio_dev); | 
|  |  | 
|  | gpiod_set_value(ad7766->pd_gpio, 1); | 
|  |  | 
|  | /* | 
|  | * The PD pin is synchronous to the clock, so give it some time to | 
|  | * notice the change before we disable the clock. | 
|  | */ | 
|  | msleep(20); | 
|  |  | 
|  | clk_disable_unprepare(ad7766->mclk); | 
|  | regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ad7766_read_raw(struct iio_dev *indio_dev, | 
|  | const struct iio_chan_spec *chan, int *val, int *val2, long info) | 
|  | { | 
|  | struct ad7766 *ad7766 = iio_priv(indio_dev); | 
|  | struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer; | 
|  | int scale_uv; | 
|  |  | 
|  | switch (info) { | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | scale_uv = regulator_get_voltage(vref); | 
|  | if (scale_uv < 0) | 
|  | return scale_uv; | 
|  | *val = scale_uv / 1000; | 
|  | *val2 = chan->scan_type.realbits; | 
|  | return IIO_VAL_FRACTIONAL_LOG2; | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | *val = clk_get_rate(ad7766->mclk) / | 
|  | ad7766->chip_info->decimation_factor; | 
|  | return IIO_VAL_INT; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static const struct iio_chan_spec ad7766_channels[] = { | 
|  | { | 
|  | .type = IIO_VOLTAGE, | 
|  | .indexed = 1, | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), | 
|  | .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), | 
|  | .scan_type = { | 
|  | .sign = 's', | 
|  | .realbits = 24, | 
|  | .storagebits = 32, | 
|  | .endianness = IIO_BE, | 
|  | }, | 
|  | }, | 
|  | IIO_CHAN_SOFT_TIMESTAMP(1), | 
|  | }; | 
|  |  | 
|  | static const struct ad7766_chip_info ad7766_chip_info[] = { | 
|  | [ID_AD7766] = { | 
|  | .decimation_factor = 8, | 
|  | }, | 
|  | [ID_AD7766_1] = { | 
|  | .decimation_factor = 16, | 
|  | }, | 
|  | [ID_AD7766_2] = { | 
|  | .decimation_factor = 32, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = { | 
|  | .preenable = &ad7766_preenable, | 
|  | .postdisable = &ad7766_postdisable, | 
|  | }; | 
|  |  | 
|  | static const struct iio_info ad7766_info = { | 
|  | .read_raw = &ad7766_read_raw, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t ad7766_irq(int irq, void *private) | 
|  | { | 
|  | iio_trigger_poll(private); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable) | 
|  | { | 
|  | struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig); | 
|  |  | 
|  | if (enable) | 
|  | enable_irq(ad7766->spi->irq); | 
|  | else | 
|  | disable_irq(ad7766->spi->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct iio_trigger_ops ad7766_trigger_ops = { | 
|  | .set_trigger_state = ad7766_set_trigger_state, | 
|  | .validate_device = iio_trigger_validate_own_device, | 
|  | }; | 
|  |  | 
|  | static int ad7766_probe(struct spi_device *spi) | 
|  | { | 
|  | const struct spi_device_id *id = spi_get_device_id(spi); | 
|  | struct iio_dev *indio_dev; | 
|  | struct ad7766 *ad7766; | 
|  | int ret; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766)); | 
|  | if (!indio_dev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ad7766 = iio_priv(indio_dev); | 
|  | ad7766->chip_info = &ad7766_chip_info[id->driver_data]; | 
|  |  | 
|  | ad7766->mclk = devm_clk_get(&spi->dev, "mclk"); | 
|  | if (IS_ERR(ad7766->mclk)) | 
|  | return PTR_ERR(ad7766->mclk); | 
|  |  | 
|  | ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd"; | 
|  | ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd"; | 
|  | ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref"; | 
|  |  | 
|  | ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg), | 
|  | ad7766->reg); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", | 
|  | GPIOD_OUT_HIGH); | 
|  | if (IS_ERR(ad7766->pd_gpio)) | 
|  | return PTR_ERR(ad7766->pd_gpio); | 
|  |  | 
|  | indio_dev->name = spi_get_device_id(spi)->name; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  | indio_dev->channels = ad7766_channels; | 
|  | indio_dev->num_channels = ARRAY_SIZE(ad7766_channels); | 
|  | indio_dev->info = &ad7766_info; | 
|  |  | 
|  | if (spi->irq > 0) { | 
|  | ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", | 
|  | indio_dev->name, indio_dev->id); | 
|  | if (!ad7766->trig) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ad7766->trig->ops = &ad7766_trigger_ops; | 
|  | ad7766->trig->dev.parent = &spi->dev; | 
|  | iio_trigger_set_drvdata(ad7766->trig, ad7766); | 
|  |  | 
|  | ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, | 
|  | IRQF_TRIGGER_FALLING, dev_name(&spi->dev), | 
|  | ad7766->trig); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * The device generates interrupts as long as it is powered up. | 
|  | * Some platforms might not allow the option to power it down so | 
|  | * disable the interrupt to avoid extra load on the system | 
|  | */ | 
|  | disable_irq(spi->irq); | 
|  |  | 
|  | ret = devm_iio_trigger_register(&spi->dev, ad7766->trig); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | spi_set_drvdata(spi, indio_dev); | 
|  |  | 
|  | ad7766->spi = spi; | 
|  |  | 
|  | /* First byte always 0 */ | 
|  | ad7766->xfer.rx_buf = &ad7766->data[1]; | 
|  | ad7766->xfer.len = 3; | 
|  |  | 
|  | spi_message_init(&ad7766->msg); | 
|  | spi_message_add_tail(&ad7766->xfer, &ad7766->msg); | 
|  |  | 
|  | ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, | 
|  | &iio_pollfunc_store_time, &ad7766_trigger_handler, | 
|  | &ad7766_buffer_setup_ops); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = devm_iio_device_register(&spi->dev, indio_dev); | 
|  | if (ret) | 
|  | return ret; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct spi_device_id ad7766_id[] = { | 
|  | {"ad7766", ID_AD7766}, | 
|  | {"ad7766-1", ID_AD7766_1}, | 
|  | {"ad7766-2", ID_AD7766_2}, | 
|  | {"ad7767", ID_AD7766}, | 
|  | {"ad7767-1", ID_AD7766_1}, | 
|  | {"ad7767-2", ID_AD7766_2}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(spi, ad7766_id); | 
|  |  | 
|  | static struct spi_driver ad7766_driver = { | 
|  | .driver = { | 
|  | .name	= "ad7766", | 
|  | }, | 
|  | .probe		= ad7766_probe, | 
|  | .id_table	= ad7766_id, | 
|  | }; | 
|  | module_spi_driver(ad7766_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); | 
|  | MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support"); | 
|  | MODULE_LICENSE("GPL v2"); |