| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright 2013 Freescale Semiconductor, Inc. |
| |
| /dts-v1/; |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "imx25.dtsi" |
| |
| / { |
| model = "Freescale i.MX25 Product Development Kit"; |
| compatible = "fsl,imx25-pdk", "fsl,imx25"; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x4000000>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_fec_3v3: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "fec-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 3 0>; |
| enable-active-high; |
| }; |
| |
| reg_2p5v: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "2P5V"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| |
| reg_3p3v: regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_can_3v3: regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "can-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 6 0>; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx25-pdk-sgtl5000", |
| "fsl,imx-audio-sgtl5000"; |
| model = "imx25-pdk-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <4>; |
| }; |
| |
| wvga: display { |
| model = "CLAA057VC01CW"; |
| bits-per-pixel = <16>; |
| fsl,pcr = <0xfa208b80>; |
| bus-width = <18>; |
| display-timings { |
| native-mode = <&wvga_timings>; |
| wvga_timings: 640x480 { |
| hactive = <640>; |
| vactive = <480>; |
| hback-porch = <45>; |
| hfront-porch = <114>; |
| hsync-len = <1>; |
| vback-porch = <33>; |
| vfront-porch = <11>; |
| vsync-len = <1>; |
| clock-frequency = <25200000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can1>; |
| xceiver-supply = <®_can_3v3>; |
| status = "okay"; |
| }; |
| |
| &esdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1>; |
| cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &fec { |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>; |
| phy-supply = <®_fec_3v3>; |
| phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| codec: sgtl5000@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&clks 129>; |
| VDDA-supply = <®_2p5v>; |
| VDDIO-supply = <®_3p3v>; |
| }; |
| }; |
| |
| &iomuxc { |
| imx25-pdk { |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX25_PAD_RW__AUD4_TXFS 0xe0 |
| MX25_PAD_OE__AUD4_TXC 0xe0 |
| MX25_PAD_EB0__AUD4_TXD 0xe0 |
| MX25_PAD_EB1__AUD4_RXD 0xe0 |
| >; |
| }; |
| |
| pinctrl_can1: can1grp { |
| fsl,pins = < |
| MX25_PAD_GPIO_A__CAN1_TX 0x0 |
| MX25_PAD_GPIO_B__CAN1_RX 0x0 |
| MX25_PAD_D14__GPIO_4_6 0x80000000 |
| >; |
| }; |
| |
| pinctrl_esdhc1: esdhc1grp { |
| fsl,pins = < |
| MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 |
| MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 |
| MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 |
| MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 |
| MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 |
| MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 |
| MX25_PAD_A14__GPIO_2_0 0x80000000 |
| MX25_PAD_A15__GPIO_2_1 0x80000000 |
| >; |
| }; |
| |
| pinctrl_fec: fecgrp { |
| fsl,pins = < |
| MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 |
| MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 |
| MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 |
| MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 |
| MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 |
| MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 |
| MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 |
| MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 |
| MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 |
| MX25_PAD_A17__GPIO_2_3 0x80000000 |
| MX25_PAD_D12__GPIO_4_8 0x80000000 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 |
| MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 |
| >; |
| }; |
| |
| pinctrl_kpp: kppgrp { |
| fsl,pins = < |
| MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 |
| MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 |
| MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 |
| MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 |
| MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 |
| MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 |
| MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 |
| MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 |
| >; |
| }; |
| |
| pinctrl_lcd: lcdgrp { |
| fsl,pins = < |
| MX25_PAD_LD0__LD0 0xe0 |
| MX25_PAD_LD1__LD1 0xe0 |
| MX25_PAD_LD2__LD2 0xe0 |
| MX25_PAD_LD3__LD3 0xe0 |
| MX25_PAD_LD4__LD4 0xe0 |
| MX25_PAD_LD5__LD5 0xe0 |
| MX25_PAD_LD6__LD6 0xe0 |
| MX25_PAD_LD7__LD7 0xe0 |
| MX25_PAD_LD8__LD8 0xe0 |
| MX25_PAD_LD9__LD9 0xe0 |
| MX25_PAD_LD10__LD10 0xe0 |
| MX25_PAD_LD11__LD11 0xe0 |
| MX25_PAD_LD12__LD12 0xe0 |
| MX25_PAD_LD13__LD13 0xe0 |
| MX25_PAD_LD14__LD14 0xe0 |
| MX25_PAD_LD15__LD15 0xe0 |
| MX25_PAD_GPIO_E__LD16 0xe0 |
| MX25_PAD_GPIO_F__LD17 0xe0 |
| MX25_PAD_HSYNC__HSYNC 0xe0 |
| MX25_PAD_VSYNC__VSYNC 0xe0 |
| MX25_PAD_LSCLK__LSCLK 0xe0 |
| MX25_PAD_OE_ACD__OE_ACD 0xe0 |
| MX25_PAD_CONTRAST__CONTRAST 0xe0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX25_PAD_UART1_RTS__UART1_RTS 0xe0 |
| MX25_PAD_UART1_CTS__UART1_CTS 0xe0 |
| MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 |
| MX25_PAD_UART1_RXD__UART1_RXD 0xc0 |
| >; |
| }; |
| }; |
| }; |
| |
| &lcdc { |
| display = <&wvga>; |
| fsl,lpccr = <0x00a903ff>; |
| fsl,lscr1 = <0x00120300>; |
| fsl,dmacr = <0x00020010>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd>; |
| status = "okay"; |
| }; |
| |
| &nfc { |
| nand-on-flash-bbt; |
| status = "okay"; |
| }; |
| |
| &kpp { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_kpp>; |
| linux,keymap = < |
| MATRIX_KEY(0x0, 0x0, KEY_UP) |
| MATRIX_KEY(0x0, 0x1, KEY_DOWN) |
| MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) |
| MATRIX_KEY(0x0, 0x3, KEY_HOME) |
| MATRIX_KEY(0x1, 0x0, KEY_RIGHT) |
| MATRIX_KEY(0x1, 0x1, KEY_LEFT) |
| MATRIX_KEY(0x1, 0x2, KEY_ENTER) |
| MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) |
| MATRIX_KEY(0x2, 0x0, KEY_F6) |
| MATRIX_KEY(0x2, 0x1, KEY_F8) |
| MATRIX_KEY(0x2, 0x2, KEY_F9) |
| MATRIX_KEY(0x2, 0x3, KEY_F10) |
| MATRIX_KEY(0x3, 0x0, KEY_F1) |
| MATRIX_KEY(0x3, 0x1, KEY_F2) |
| MATRIX_KEY(0x3, 0x2, KEY_F3) |
| MATRIX_KEY(0x3, 0x2, KEY_POWER) |
| >; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &tsc { |
| status = "okay"; |
| }; |
| |
| &tscadc { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usbhost1 { |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| external-vbus-divider; |
| status = "okay"; |
| }; |
