| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DTS file for SPEAr1340 Evaluation Baord |
| * |
| * Copyright 2012 Viresh Kumar <vireshk@kernel.org> |
| */ |
| |
| /dts-v1/; |
| /include/ "spear1340.dtsi" |
| |
| / { |
| model = "ST SPEAr1340 Evaluation Board"; |
| compatible = "st,spear1340-evb", "st,spear1340"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memory { |
| reg = <0 0x40000000>; |
| }; |
| |
| ahb { |
| pinmux@e0700000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&state_default>; |
| |
| state_default: pinmux { |
| pads_as_gpio { |
| st,pins = "pads_as_gpio_grp"; |
| st,function = "pads_as_gpio"; |
| }; |
| fsmc { |
| st,pins = "fsmc_8bit_grp"; |
| st,function = "fsmc"; |
| }; |
| uart0 { |
| st,pins = "uart0_grp"; |
| st,function = "uart0"; |
| }; |
| i2c0 { |
| st,pins = "i2c0_grp"; |
| st,function = "i2c0"; |
| }; |
| i2c1 { |
| st,pins = "i2c1_grp"; |
| st,function = "i2c1"; |
| }; |
| spdif-in { |
| st,pins = "spdif_in_grp"; |
| st,function = "spdif_in"; |
| }; |
| spdif-out { |
| st,pins = "spdif_out_grp"; |
| st,function = "spdif_out"; |
| }; |
| ssp0 { |
| st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp"; |
| st,function = "ssp0"; |
| }; |
| smi-pmx { |
| st,pins = "smi_grp"; |
| st,function = "smi"; |
| }; |
| i2s { |
| st,pins = "i2s_in_grp", "i2s_out_grp"; |
| st,function = "i2s"; |
| }; |
| gmac { |
| st,pins = "gmii_grp", "rgmii_grp"; |
| st,function = "gmac"; |
| }; |
| cam0 { |
| st,pins = "cam0_grp"; |
| st,function = "cam0"; |
| }; |
| cam1 { |
| st,pins = "cam1_grp"; |
| st,function = "cam1"; |
| }; |
| cam2 { |
| st,pins = "cam2_grp"; |
| st,function = "cam2"; |
| }; |
| cam3 { |
| st,pins = "cam3_grp"; |
| st,function = "cam3"; |
| }; |
| cec0 { |
| st,pins = "cec0_grp"; |
| st,function = "cec0"; |
| }; |
| cec1 { |
| st,pins = "cec1_grp"; |
| st,function = "cec1"; |
| }; |
| sdhci { |
| st,pins = "sdhci_grp"; |
| st,function = "sdhci"; |
| }; |
| clcd { |
| st,pins = "clcd_grp"; |
| st,function = "clcd"; |
| }; |
| sata { |
| st,pins = "sata_grp"; |
| st,function = "sata"; |
| }; |
| pcie { |
| st,pins = "pcie_grp"; |
| st,function = "pcie"; |
| }; |
| |
| }; |
| }; |
| |
| ahci@b1000000 { |
| status = "okay"; |
| }; |
| |
| miphy@eb800000 { |
| status = "okay"; |
| }; |
| |
| dma@ea800000 { |
| status = "okay"; |
| }; |
| |
| dma@eb000000 { |
| status = "okay"; |
| }; |
| |
| fsmc: flash@b0000000 { |
| status = "okay"; |
| |
| partition@0 { |
| label = "xloader"; |
| reg = <0x0 0x200000>; |
| }; |
| partition@200000 { |
| label = "u-boot"; |
| reg = <0x200000 0x200000>; |
| }; |
| partition@400000 { |
| label = "environment"; |
| reg = <0x400000 0x100000>; |
| }; |
| partition@500000 { |
| label = "dtb"; |
| reg = <0x500000 0x100000>; |
| }; |
| partition@600000 { |
| label = "linux"; |
| reg = <0x600000 0xC00000>; |
| }; |
| partition@1200000 { |
| label = "rootfs"; |
| reg = <0x1200000 0x0>; |
| }; |
| }; |
| |
| gmac0: eth@e2000000 { |
| phy-mode = "rgmii"; |
| status = "okay"; |
| }; |
| |
| sdhci@b3000000 { |
| status = "okay"; |
| }; |
| |
| smi: flash@ea000000 { |
| status = "okay"; |
| clock-rate=<50000000>; |
| |
| flash@e6000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xe6000000 0x800000>; |
| st,smi-fast-mode; |
| |
| partition@0 { |
| label = "xloader"; |
| reg = <0x0 0x10000>; |
| }; |
| partition@10000 { |
| label = "u-boot"; |
| reg = <0x10000 0x50000>; |
| }; |
| partition@60000 { |
| label = "environment"; |
| reg = <0x60000 0x10000>; |
| }; |
| partition@70000 { |
| label = "dtb"; |
| reg = <0x70000 0x10000>; |
| }; |
| partition@80000 { |
| label = "linux"; |
| reg = <0x80000 0x310000>; |
| }; |
| partition@390000 { |
| label = "rootfs"; |
| reg = <0x390000 0x0>; |
| }; |
| }; |
| }; |
| |
| ehci@e4800000 { |
| status = "okay"; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| button@1 { |
| label = "wakeup"; |
| linux,code = <0x100>; |
| gpios = <&gpio1 1 0x4>; |
| debounce-interval = <20>; |
| wakeup-source; |
| }; |
| }; |
| |
| ehci@e5800000 { |
| status = "okay"; |
| }; |
| |
| i2s0: i2s-play@b2400000 { |
| status = "okay"; |
| }; |
| |
| i2s1: i2s-rec@b2000000 { |
| status = "okay"; |
| }; |
| |
| incodec: dir-hifi { |
| compatible = "dummy,dir-hifi"; |
| status = "okay"; |
| }; |
| |
| ohci@e4000000 { |
| status = "okay"; |
| }; |
| |
| ohci@e5000000 { |
| status = "okay"; |
| }; |
| |
| outcodec: dit-hifi { |
| compatible = "dummy,dit-hifi"; |
| status = "okay"; |
| }; |
| |
| sound { |
| compatible = "spear,spear-evb"; |
| audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>; |
| audio-codecs = <&incodec &outcodec &sta529 &sta529>; |
| codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio"; |
| stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap"; |
| dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm"; |
| nr_controllers = <4>; |
| status = "okay"; |
| }; |
| |
| spdif0: spdif-in@d0100000 { |
| status = "okay"; |
| }; |
| |
| spdif1: spdif-out@d0000000 { |
| status = "okay"; |
| }; |
| |
| apb { |
| adc@e0080000 { |
| status = "okay"; |
| }; |
| |
| i2s-play@b2400000 { |
| status = "okay"; |
| }; |
| |
| i2s-rec@b2000000 { |
| status = "okay"; |
| }; |
| |
| gpio0: gpio@e0600000 { |
| status = "okay"; |
| }; |
| |
| gpio1: gpio@e0680000 { |
| status = "okay"; |
| }; |
| |
| gpio@e2800000 { |
| status = "okay"; |
| }; |
| |
| i2c0: i2c@e0280000 { |
| status = "okay"; |
| |
| sta529: sta529@1a { |
| compatible = "st,sta529"; |
| reg = <0x1a>; |
| }; |
| }; |
| |
| i2c1: i2c@b4000000 { |
| status = "okay"; |
| |
| eeprom0@56 { |
| compatible = "st,eeprom"; |
| reg = <0x56>; |
| }; |
| |
| stmpe801@41 { |
| compatible = "st,stmpe801"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x41>; |
| interrupts = <4 0x4>; |
| interrupt-parent = <&gpio0>; |
| irq-trigger = <0x2>; |
| |
| stmpegpio: stmpe_gpio { |
| compatible = "st,stmpe-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| }; |
| |
| kbd@e0300000 { |
| linux,keymap = < 0x00000001 |
| 0x00010002 |
| 0x00020003 |
| 0x00030004 |
| 0x00040005 |
| 0x00050006 |
| 0x00060007 |
| 0x00070008 |
| 0x00080009 |
| 0x0100000a |
| 0x0101000c |
| 0x0102000d |
| 0x0103000e |
| 0x0104000f |
| 0x01050010 |
| 0x01060011 |
| 0x01070012 |
| 0x01080013 |
| 0x02000014 |
| 0x02010015 |
| 0x02020016 |
| 0x02030017 |
| 0x02040018 |
| 0x02050019 |
| 0x0206001a |
| 0x0207001b |
| 0x0208001c |
| 0x0300001d |
| 0x0301001e |
| 0x0302001f |
| 0x03030020 |
| 0x03040021 |
| 0x03050022 |
| 0x03060023 |
| 0x03070024 |
| 0x03080025 |
| 0x04000026 |
| 0x04010027 |
| 0x04020028 |
| 0x04030029 |
| 0x0404002a |
| 0x0405002b |
| 0x0406002c |
| 0x0407002d |
| 0x0408002e |
| 0x0500002f |
| 0x05010030 |
| 0x05020031 |
| 0x05030032 |
| 0x05040033 |
| 0x05050034 |
| 0x05060035 |
| 0x05070036 |
| 0x05080037 |
| 0x06000038 |
| 0x06010039 |
| 0x0602003a |
| 0x0603003b |
| 0x0604003c |
| 0x0605003d |
| 0x0606003e |
| 0x0607003f |
| 0x06080040 |
| 0x07000041 |
| 0x07010042 |
| 0x07020043 |
| 0x07030044 |
| 0x07040045 |
| 0x07050046 |
| 0x07060047 |
| 0x07070048 |
| 0x07080049 |
| 0x0800004a |
| 0x0801004b |
| 0x0802004c |
| 0x0803004d |
| 0x0804004e |
| 0x0805004f |
| 0x08060050 |
| 0x08070051 |
| 0x08080052 >; |
| autorepeat; |
| st,mode = <0>; |
| suspended_rate = <2000000>; |
| status = "okay"; |
| }; |
| |
| rtc@e0580000 { |
| status = "okay"; |
| }; |
| |
| serial@e0000000 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <>; |
| }; |
| |
| serial@b4100000 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <>; |
| }; |
| |
| spi0: spi@e0100000 { |
| status = "okay"; |
| num-cs = <3>; |
| cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>, |
| <&gpiopinctrl 85 0>; |
| |
| m25p80@0 { |
| compatible = "m25p80"; |
| reg = <0>; |
| spi-max-frequency = <12000000>; |
| spi-cpol; |
| spi-cpha; |
| pl022,hierarchy = <0>; |
| pl022,interface = <0>; |
| pl022,slave-tx-disable; |
| pl022,com-mode = <0x2>; |
| pl022,rx-level-trig = <0>; |
| pl022,tx-level-trig = <0>; |
| pl022,ctrl-len = <0x11>; |
| pl022,wait-state = <0>; |
| pl022,duplex = <0>; |
| }; |
| |
| stmpe610@1 { |
| compatible = "st,stmpe610"; |
| spi-max-frequency = <1000000>; |
| spi-cpha; |
| reg = <1>; |
| pl022,hierarchy = <0>; |
| pl022,interface = <0>; |
| pl022,slave-tx-disable; |
| pl022,com-mode = <0>; |
| pl022,rx-level-trig = <0>; |
| pl022,tx-level-trig = <0>; |
| pl022,ctrl-len = <0x7>; |
| pl022,wait-state = <0>; |
| pl022,duplex = <0>; |
| interrupts = <100 0>; |
| interrupt-parent = <&gpiopinctrl>; |
| irq-trigger = <0x2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| ts,sample-time = <4>; |
| ts,mod-12b = <1>; |
| ts,ref-sel = <0>; |
| ts,adc-freq = <1>; |
| ts,ave-ctrl = <1>; |
| ts,touch-det-delay = <2>; |
| ts,settling = <2>; |
| ts,fraction-z = <7>; |
| ts,i-drive = <1>; |
| }; |
| }; |
| }; |
| |
| timer@ec800600 { |
| status = "okay"; |
| }; |
| |
| wdt@ec800620 { |
| status = "okay"; |
| }; |
| }; |
| }; |
| }; |
