|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Maxim MAX77714 Core Driver | 
|  | * | 
|  | * Copyright (C) 2022 Luca Ceresoli | 
|  | * Author: Luca Ceresoli <luca.ceresoli@bootlin.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/max77714.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | static const struct mfd_cell max77714_cells[] = { | 
|  | { .name = "max77714-watchdog" }, | 
|  | { .name = "max77714-rtc" }, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range max77714_readable_ranges[] = { | 
|  | regmap_reg_range(MAX77714_INT_TOP,     MAX77714_INT_TOP), | 
|  | regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM), | 
|  | regmap_reg_range(MAX77714_32K_STATUS,  MAX77714_32K_CONFIG), | 
|  | regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range max77714_writable_ranges[] = { | 
|  | regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM), | 
|  | regmap_reg_range(MAX77714_32K_CONFIG,  MAX77714_32K_CONFIG), | 
|  | regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table max77714_readable_table = { | 
|  | .yes_ranges = max77714_readable_ranges, | 
|  | .n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table max77714_writable_table = { | 
|  | .yes_ranges = max77714_writable_ranges, | 
|  | .n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config max77714_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = MAX77714_CNFG2_ONOFF, | 
|  | .rd_table = &max77714_readable_table, | 
|  | .wr_table = &max77714_writable_table, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq max77714_top_irqs[] = { | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF,   0, MAX77714_INT_TOP_ONOFF), | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC,     0, MAX77714_INT_TOP_RTC), | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO,    0, MAX77714_INT_TOP_GPIO), | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO,     0, MAX77714_INT_TOP_LDO), | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD,      0, MAX77714_INT_TOP_SD), | 
|  | REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL,    0, MAX77714_INT_TOP_GLBL), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip max77714_irq_chip = { | 
|  | .name			= "max77714-pmic", | 
|  | .status_base		= MAX77714_INT_TOP, | 
|  | .mask_base		= MAX77714_INT_TOPM, | 
|  | .num_regs		= 1, | 
|  | .irqs			= max77714_top_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(max77714_top_irqs), | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * MAX77714 initially uses the internal, low precision oscillator. Enable | 
|  | * the external oscillator by setting the XOSC_RETRY bit. If the external | 
|  | * oscillator is not OK (probably not installed) this has no effect. | 
|  | */ | 
|  | static int max77714_setup_xosc(struct device *dev, struct regmap *regmap) | 
|  | { | 
|  | /* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */ | 
|  | static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */ | 
|  | unsigned int load_cap_idx; | 
|  | unsigned int status; | 
|  | int err; | 
|  |  | 
|  | err = regmap_update_bits(regmap, MAX77714_32K_CONFIG, | 
|  | MAX77714_32K_CONFIG_XOSC_RETRY, | 
|  | MAX77714_32K_CONFIG_XOSC_RETRY); | 
|  | if (err) | 
|  | return dev_err_probe(dev, err, "Failed to configure the external oscillator\n"); | 
|  |  | 
|  | err = regmap_read(regmap, MAX77714_32K_STATUS, &status); | 
|  | if (err) | 
|  | return dev_err_probe(dev, err, "Failed to read external oscillator status\n"); | 
|  |  | 
|  | load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF) | 
|  | & MAX77714_32K_STATUS_32KLOAD_MSK; | 
|  |  | 
|  | dev_info(dev, "Using %s oscillator, %d pF load cap\n", | 
|  | status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external", | 
|  | load_cap[load_cap_idx]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int max77714_probe(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct regmap *regmap; | 
|  | struct regmap_irq_chip_data *irq_data; | 
|  | int err; | 
|  |  | 
|  | regmap = devm_regmap_init_i2c(client, &max77714_regmap_config); | 
|  | if (IS_ERR(regmap)) | 
|  | return dev_err_probe(dev, PTR_ERR(regmap), | 
|  | "Failed to initialise regmap\n"); | 
|  |  | 
|  | err = max77714_setup_xosc(dev, regmap); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = devm_regmap_add_irq_chip(dev, regmap, client->irq, | 
|  | IRQF_ONESHOT | IRQF_SHARED, 0, | 
|  | &max77714_irq_chip, &irq_data); | 
|  | if (err) | 
|  | return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n"); | 
|  |  | 
|  | err =  devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, | 
|  | max77714_cells, ARRAY_SIZE(max77714_cells), | 
|  | NULL, 0, NULL); | 
|  | if (err) | 
|  | return dev_err_probe(dev, err, "Failed to register child devices\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id max77714_dt_match[] = { | 
|  | { .compatible = "maxim,max77714" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, max77714_dt_match); | 
|  |  | 
|  | static struct i2c_driver max77714_driver = { | 
|  | .driver = { | 
|  | .name = "max77714", | 
|  | .of_match_table = max77714_dt_match, | 
|  | }, | 
|  | .probe_new = max77714_probe, | 
|  | }; | 
|  | module_i2c_driver(max77714_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver"); | 
|  | MODULE_AUTHOR("Luca Ceresoli <luca.ceresoli@bootlin.com>"); | 
|  | MODULE_LICENSE("GPL"); |