|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | *  Bluetooth support for Realtek devices | 
|  | * | 
|  | *  Copyright (C) 2015 Endless Mobile, Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  | #include "btrtl.h" | 
|  |  | 
|  | #define VERSION "0.1" | 
|  |  | 
|  | #define RTL_CHIP_8723CS_CG	3 | 
|  | #define RTL_CHIP_8723CS_VF	4 | 
|  | #define RTL_CHIP_8723CS_XX	5 | 
|  | #define RTL_EPATCH_SIGNATURE	"Realtech" | 
|  | #define RTL_EPATCH_SIGNATURE_V2	"RTBTCore" | 
|  | #define RTL_ROM_LMP_8703B	0x8703 | 
|  | #define RTL_ROM_LMP_8723A	0x1200 | 
|  | #define RTL_ROM_LMP_8723B	0x8723 | 
|  | #define RTL_ROM_LMP_8821A	0x8821 | 
|  | #define RTL_ROM_LMP_8761A	0x8761 | 
|  | #define RTL_ROM_LMP_8822B	0x8822 | 
|  | #define RTL_ROM_LMP_8852A	0x8852 | 
|  | #define RTL_ROM_LMP_8851B	0x8851 | 
|  | #define RTL_CONFIG_MAGIC	0x8723ab55 | 
|  |  | 
|  | #define RTL_VSC_OP_COREDUMP	0xfcff | 
|  |  | 
|  | #define IC_MATCH_FL_LMPSUBV	(1 << 0) | 
|  | #define IC_MATCH_FL_HCIREV	(1 << 1) | 
|  | #define IC_MATCH_FL_HCIVER	(1 << 2) | 
|  | #define IC_MATCH_FL_HCIBUS	(1 << 3) | 
|  | #define IC_MATCH_FL_CHIP_TYPE	(1 << 4) | 
|  | #define IC_INFO(lmps, hcir, hciv, bus) \ | 
|  | .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \ | 
|  | IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, \ | 
|  | .lmp_subver = (lmps), \ | 
|  | .hci_rev = (hcir), \ | 
|  | .hci_ver = (hciv), \ | 
|  | .hci_bus = (bus) | 
|  |  | 
|  | #define	RTL_CHIP_SUBVER (&(struct rtl_vendor_cmd) {{0x10, 0x38, 0x04, 0x28, 0x80}}) | 
|  | #define	RTL_CHIP_REV    (&(struct rtl_vendor_cmd) {{0x10, 0x3A, 0x04, 0x28, 0x80}}) | 
|  | #define	RTL_SEC_PROJ    (&(struct rtl_vendor_cmd) {{0x10, 0xA4, 0x0D, 0x00, 0xb0}}) | 
|  |  | 
|  | #define RTL_PATCH_SNIPPETS		0x01 | 
|  | #define RTL_PATCH_DUMMY_HEADER		0x02 | 
|  | #define RTL_PATCH_SECURITY_HEADER	0x03 | 
|  |  | 
|  | enum btrtl_chip_id { | 
|  | CHIP_ID_8723A, | 
|  | CHIP_ID_8723B, | 
|  | CHIP_ID_8821A, | 
|  | CHIP_ID_8761A, | 
|  | CHIP_ID_8822B = 8, | 
|  | CHIP_ID_8723D, | 
|  | CHIP_ID_8821C, | 
|  | CHIP_ID_8822C = 13, | 
|  | CHIP_ID_8761B, | 
|  | CHIP_ID_8852A = 18, | 
|  | CHIP_ID_8852B = 20, | 
|  | CHIP_ID_8852C = 25, | 
|  | CHIP_ID_8851B = 36, | 
|  | }; | 
|  |  | 
|  | struct id_table { | 
|  | __u16 match_flags; | 
|  | __u16 lmp_subver; | 
|  | __u16 hci_rev; | 
|  | __u8 hci_ver; | 
|  | __u8 hci_bus; | 
|  | __u8 chip_type; | 
|  | bool config_needed; | 
|  | bool has_rom_version; | 
|  | bool has_msft_ext; | 
|  | char *fw_name; | 
|  | char *cfg_name; | 
|  | char *hw_info; | 
|  | }; | 
|  |  | 
|  | struct btrtl_device_info { | 
|  | const struct id_table *ic_info; | 
|  | u8 rom_version; | 
|  | u8 *fw_data; | 
|  | int fw_len; | 
|  | u8 *cfg_data; | 
|  | int cfg_len; | 
|  | bool drop_fw; | 
|  | int project_id; | 
|  | u8 key_id; | 
|  | struct list_head patch_subsecs; | 
|  | }; | 
|  |  | 
|  | static const struct id_table ic_id_table[] = { | 
|  | /* 8723A */ | 
|  | { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = false, | 
|  | .fw_name = "rtl_bt/rtl8723a_fw", | 
|  | .cfg_name = NULL, | 
|  | .hw_info = "rtl8723au" }, | 
|  |  | 
|  | /* 8723BS */ | 
|  | { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723bs_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723bs_config", | 
|  | .hw_info  = "rtl8723bs" }, | 
|  |  | 
|  | /* 8723B */ | 
|  | { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723b_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723b_config", | 
|  | .hw_info  = "rtl8723bu" }, | 
|  |  | 
|  | /* 8723CS-CG */ | 
|  | { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE | | 
|  | IC_MATCH_FL_HCIBUS, | 
|  | .lmp_subver = RTL_ROM_LMP_8703B, | 
|  | .chip_type = RTL_CHIP_8723CS_CG, | 
|  | .hci_bus = HCI_UART, | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723cs_cg_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723cs_cg_config", | 
|  | .hw_info  = "rtl8723cs-cg" }, | 
|  |  | 
|  | /* 8723CS-VF */ | 
|  | { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE | | 
|  | IC_MATCH_FL_HCIBUS, | 
|  | .lmp_subver = RTL_ROM_LMP_8703B, | 
|  | .chip_type = RTL_CHIP_8723CS_VF, | 
|  | .hci_bus = HCI_UART, | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723cs_vf_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723cs_vf_config", | 
|  | .hw_info  = "rtl8723cs-vf" }, | 
|  |  | 
|  | /* 8723CS-XX */ | 
|  | { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE | | 
|  | IC_MATCH_FL_HCIBUS, | 
|  | .lmp_subver = RTL_ROM_LMP_8703B, | 
|  | .chip_type = RTL_CHIP_8723CS_XX, | 
|  | .hci_bus = HCI_UART, | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723cs_xx_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723cs_xx_config", | 
|  | .hw_info  = "rtl8723cs" }, | 
|  |  | 
|  | /* 8723D */ | 
|  | { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723d_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723d_config", | 
|  | .hw_info  = "rtl8723du" }, | 
|  |  | 
|  | /* 8723DS */ | 
|  | { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8723ds_fw", | 
|  | .cfg_name = "rtl_bt/rtl8723ds_config", | 
|  | .hw_info  = "rtl8723ds" }, | 
|  |  | 
|  | /* 8821A */ | 
|  | { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8821a_fw", | 
|  | .cfg_name = "rtl_bt/rtl8821a_config", | 
|  | .hw_info  = "rtl8821au" }, | 
|  |  | 
|  | /* 8821C */ | 
|  | { IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8821c_fw", | 
|  | .cfg_name = "rtl_bt/rtl8821c_config", | 
|  | .hw_info  = "rtl8821cu" }, | 
|  |  | 
|  | /* 8821CS */ | 
|  | { IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8821cs_fw", | 
|  | .cfg_name = "rtl_bt/rtl8821cs_config", | 
|  | .hw_info  = "rtl8821cs" }, | 
|  |  | 
|  | /* 8761A */ | 
|  | { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8761a_fw", | 
|  | .cfg_name = "rtl_bt/rtl8761a_config", | 
|  | .hw_info  = "rtl8761au" }, | 
|  |  | 
|  | /* 8761B */ | 
|  | { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8761b_fw", | 
|  | .cfg_name = "rtl_bt/rtl8761b_config", | 
|  | .hw_info  = "rtl8761btv" }, | 
|  |  | 
|  | /* 8761BU */ | 
|  | { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .fw_name  = "rtl_bt/rtl8761bu_fw", | 
|  | .cfg_name = "rtl_bt/rtl8761bu_config", | 
|  | .hw_info  = "rtl8761bu" }, | 
|  |  | 
|  | /* 8822C with UART interface */ | 
|  | { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8822cs_fw", | 
|  | .cfg_name = "rtl_bt/rtl8822cs_config", | 
|  | .hw_info  = "rtl8822cs" }, | 
|  |  | 
|  | /* 8822C with UART interface */ | 
|  | { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8822cs_fw", | 
|  | .cfg_name = "rtl_bt/rtl8822cs_config", | 
|  | .hw_info  = "rtl8822cs" }, | 
|  |  | 
|  | /* 8822C with USB interface */ | 
|  | { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8822cu_fw", | 
|  | .cfg_name = "rtl_bt/rtl8822cu_config", | 
|  | .hw_info  = "rtl8822cu" }, | 
|  |  | 
|  | /* 8822B */ | 
|  | { IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_USB), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8822b_fw", | 
|  | .cfg_name = "rtl_bt/rtl8822b_config", | 
|  | .hw_info  = "rtl8822bu" }, | 
|  |  | 
|  | /* 8852A */ | 
|  | { IC_INFO(RTL_ROM_LMP_8852A, 0xa, 0xb, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8852au_fw", | 
|  | .cfg_name = "rtl_bt/rtl8852au_config", | 
|  | .hw_info  = "rtl8852au" }, | 
|  |  | 
|  | /* 8852B with UART interface */ | 
|  | { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART), | 
|  | .config_needed = true, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8852bs_fw", | 
|  | .cfg_name = "rtl_bt/rtl8852bs_config", | 
|  | .hw_info  = "rtl8852bs" }, | 
|  |  | 
|  | /* 8852B */ | 
|  | { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8852bu_fw", | 
|  | .cfg_name = "rtl_bt/rtl8852bu_config", | 
|  | .hw_info  = "rtl8852bu" }, | 
|  |  | 
|  | /* 8852C */ | 
|  | { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = true, | 
|  | .fw_name  = "rtl_bt/rtl8852cu_fw", | 
|  | .cfg_name = "rtl_bt/rtl8852cu_config", | 
|  | .hw_info  = "rtl8852cu" }, | 
|  |  | 
|  | /* 8851B */ | 
|  | { IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB), | 
|  | .config_needed = false, | 
|  | .has_rom_version = true, | 
|  | .has_msft_ext = false, | 
|  | .fw_name  = "rtl_bt/rtl8851bu_fw", | 
|  | .cfg_name = "rtl_bt/rtl8851bu_config", | 
|  | .hw_info  = "rtl8851bu" }, | 
|  | }; | 
|  |  | 
|  | static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev, | 
|  | u8 hci_ver, u8 hci_bus, | 
|  | u8 chip_type) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ic_id_table); i++) { | 
|  | if ((ic_id_table[i].match_flags & IC_MATCH_FL_LMPSUBV) && | 
|  | (ic_id_table[i].lmp_subver != lmp_subver)) | 
|  | continue; | 
|  | if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) && | 
|  | (ic_id_table[i].hci_rev != hci_rev)) | 
|  | continue; | 
|  | if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) && | 
|  | (ic_id_table[i].hci_ver != hci_ver)) | 
|  | continue; | 
|  | if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) && | 
|  | (ic_id_table[i].hci_bus != hci_bus)) | 
|  | continue; | 
|  | if ((ic_id_table[i].match_flags & IC_MATCH_FL_CHIP_TYPE) && | 
|  | (ic_id_table[i].chip_type != chip_type)) | 
|  | continue; | 
|  |  | 
|  | break; | 
|  | } | 
|  | if (i >= ARRAY_SIZE(ic_id_table)) | 
|  | return NULL; | 
|  |  | 
|  | return &ic_id_table[i]; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, | 
|  | HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION failed (%ld)", | 
|  | PTR_ERR(skb)); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | if (skb->len != sizeof(struct hci_rp_read_local_version)) { | 
|  | rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION event length mismatch"); | 
|  | kfree_skb(skb); | 
|  | return ERR_PTR(-EIO); | 
|  | } | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) | 
|  | { | 
|  | struct rtl_rom_version_evt *rom_version; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | /* Read RTL ROM version command */ | 
|  | skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | rtl_dev_err(hdev, "Read ROM version failed (%ld)", | 
|  | PTR_ERR(skb)); | 
|  | return PTR_ERR(skb); | 
|  | } | 
|  |  | 
|  | if (skb->len != sizeof(*rom_version)) { | 
|  | rtl_dev_err(hdev, "version event length mismatch"); | 
|  | kfree_skb(skb); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | rom_version = (struct rtl_rom_version_evt *)skb->data; | 
|  | rtl_dev_info(hdev, "rom_version status=%x version=%x", | 
|  | rom_version->status, rom_version->version); | 
|  |  | 
|  | *version = rom_version->version; | 
|  |  | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int btrtl_vendor_read_reg16(struct hci_dev *hdev, | 
|  | struct rtl_vendor_cmd *cmd, u8 *rp) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int err = 0; | 
|  |  | 
|  | skb = __hci_cmd_sync(hdev, 0xfc61, sizeof(*cmd), cmd, | 
|  | HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | err = PTR_ERR(skb); | 
|  | rtl_dev_err(hdev, "RTL: Read reg16 failed (%d)", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (skb->len != 3 || skb->data[0]) { | 
|  | bt_dev_err(hdev, "RTL: Read reg16 length mismatch"); | 
|  | kfree_skb(skb); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (rp) | 
|  | memcpy(rp, skb->data + 1, 2); | 
|  |  | 
|  | kfree_skb(skb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void *rtl_iov_pull_data(struct rtl_iovec *iov, u32 len) | 
|  | { | 
|  | void *data = iov->data; | 
|  |  | 
|  | if (iov->len < len) | 
|  | return NULL; | 
|  |  | 
|  | iov->data += len; | 
|  | iov->len  -= len; | 
|  |  | 
|  | return data; | 
|  | } | 
|  |  | 
|  | static void btrtl_insert_ordered_subsec(struct rtl_subsection *node, | 
|  | struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | struct list_head *pos; | 
|  | struct list_head *next; | 
|  | struct rtl_subsection *subsec; | 
|  |  | 
|  | list_for_each_safe(pos, next, &btrtl_dev->patch_subsecs) { | 
|  | subsec = list_entry(pos, struct rtl_subsection, list); | 
|  | if (subsec->prio >= node->prio) | 
|  | break; | 
|  | } | 
|  | __list_add(&node->list, pos->prev, pos); | 
|  | } | 
|  |  | 
|  | static int btrtl_parse_section(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev, u32 opcode, | 
|  | u8 *data, u32 len) | 
|  | { | 
|  | struct rtl_section_hdr *hdr; | 
|  | struct rtl_subsection *subsec; | 
|  | struct rtl_common_subsec *common_subsec; | 
|  | struct rtl_sec_hdr *sec_hdr; | 
|  | int i; | 
|  | u8 *ptr; | 
|  | u16 num_subsecs; | 
|  | u32 subsec_len; | 
|  | int rc = 0; | 
|  | struct rtl_iovec iov = { | 
|  | .data = data, | 
|  | .len  = len, | 
|  | }; | 
|  |  | 
|  | hdr = rtl_iov_pull_data(&iov, sizeof(*hdr)); | 
|  | if (!hdr) | 
|  | return -EINVAL; | 
|  | num_subsecs = le16_to_cpu(hdr->num); | 
|  |  | 
|  | for (i = 0; i < num_subsecs; i++) { | 
|  | common_subsec = rtl_iov_pull_data(&iov, sizeof(*common_subsec)); | 
|  | if (!common_subsec) | 
|  | break; | 
|  | subsec_len = le32_to_cpu(common_subsec->len); | 
|  |  | 
|  | rtl_dev_dbg(hdev, "subsec, eco 0x%02x, len %08x", | 
|  | common_subsec->eco, subsec_len); | 
|  |  | 
|  | ptr = rtl_iov_pull_data(&iov, subsec_len); | 
|  | if (!ptr) | 
|  | break; | 
|  |  | 
|  | if (common_subsec->eco != btrtl_dev->rom_version + 1) | 
|  | continue; | 
|  |  | 
|  | switch (opcode) { | 
|  | case RTL_PATCH_SECURITY_HEADER: | 
|  | sec_hdr = (void *)common_subsec; | 
|  | if (sec_hdr->key_id != btrtl_dev->key_id) | 
|  | continue; | 
|  | break; | 
|  | } | 
|  |  | 
|  | subsec = kzalloc(sizeof(*subsec), GFP_KERNEL); | 
|  | if (!subsec) | 
|  | return -ENOMEM; | 
|  | subsec->opcode = opcode; | 
|  | subsec->prio = common_subsec->prio; | 
|  | subsec->len  = subsec_len; | 
|  | subsec->data = ptr; | 
|  | btrtl_insert_ordered_subsec(subsec, btrtl_dev); | 
|  | rc  += subsec_len; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int rtlbt_parse_firmware_v2(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev, | 
|  | unsigned char **_buf) | 
|  | { | 
|  | struct rtl_epatch_header_v2 *hdr; | 
|  | int rc; | 
|  | u8 reg_val[2]; | 
|  | u8 key_id; | 
|  | u32 num_sections; | 
|  | struct rtl_section *section; | 
|  | struct rtl_subsection *entry, *tmp; | 
|  | u32 section_len; | 
|  | u32 opcode; | 
|  | int len = 0; | 
|  | int i; | 
|  | u8 *ptr; | 
|  | struct rtl_iovec iov = { | 
|  | .data = btrtl_dev->fw_data, | 
|  | .len  = btrtl_dev->fw_len - 7, /* Cut the tail */ | 
|  | }; | 
|  |  | 
|  | rc = btrtl_vendor_read_reg16(hdev, RTL_SEC_PROJ, reg_val); | 
|  | if (rc < 0) | 
|  | return -EIO; | 
|  | key_id = reg_val[0]; | 
|  |  | 
|  | rtl_dev_dbg(hdev, "%s: key id %u", __func__, key_id); | 
|  |  | 
|  | btrtl_dev->key_id = key_id; | 
|  |  | 
|  | hdr = rtl_iov_pull_data(&iov, sizeof(*hdr)); | 
|  | if (!hdr) | 
|  | return -EINVAL; | 
|  | num_sections = le32_to_cpu(hdr->num_sections); | 
|  |  | 
|  | rtl_dev_dbg(hdev, "FW version %08x-%08x", *((u32 *)hdr->fw_version), | 
|  | *((u32 *)(hdr->fw_version + 4))); | 
|  |  | 
|  | for (i = 0; i < num_sections; i++) { | 
|  | section = rtl_iov_pull_data(&iov, sizeof(*section)); | 
|  | if (!section) | 
|  | break; | 
|  | section_len = le32_to_cpu(section->len); | 
|  | opcode      = le32_to_cpu(section->opcode); | 
|  |  | 
|  | rtl_dev_dbg(hdev, "opcode 0x%04x", section->opcode); | 
|  |  | 
|  | ptr = rtl_iov_pull_data(&iov, section_len); | 
|  | if (!ptr) | 
|  | break; | 
|  |  | 
|  | switch (opcode) { | 
|  | case RTL_PATCH_SNIPPETS: | 
|  | rc = btrtl_parse_section(hdev, btrtl_dev, opcode, | 
|  | ptr, section_len); | 
|  | break; | 
|  | case RTL_PATCH_SECURITY_HEADER: | 
|  | /* If key_id from chip is zero, ignore all security | 
|  | * headers. | 
|  | */ | 
|  | if (!key_id) | 
|  | break; | 
|  | rc = btrtl_parse_section(hdev, btrtl_dev, opcode, | 
|  | ptr, section_len); | 
|  | break; | 
|  | case RTL_PATCH_DUMMY_HEADER: | 
|  | rc = btrtl_parse_section(hdev, btrtl_dev, opcode, | 
|  | ptr, section_len); | 
|  | break; | 
|  | default: | 
|  | rc = 0; | 
|  | break; | 
|  | } | 
|  | if (rc < 0) { | 
|  | rtl_dev_err(hdev, "RTL: Parse section (%u) err %d", | 
|  | opcode, rc); | 
|  | return rc; | 
|  | } | 
|  | len += rc; | 
|  | } | 
|  |  | 
|  | if (!len) | 
|  | return -ENODATA; | 
|  |  | 
|  | /* Allocate mem and copy all found subsecs. */ | 
|  | ptr = kvmalloc(len, GFP_KERNEL); | 
|  | if (!ptr) | 
|  | return -ENOMEM; | 
|  |  | 
|  | len = 0; | 
|  | list_for_each_entry_safe(entry, tmp, &btrtl_dev->patch_subsecs, list) { | 
|  | rtl_dev_dbg(hdev, "RTL: opcode %08x, addr %p, len 0x%x", | 
|  | entry->opcode, entry->data, entry->len); | 
|  | memcpy(ptr + len, entry->data, entry->len); | 
|  | len += entry->len; | 
|  | } | 
|  |  | 
|  | if (!len) | 
|  | return -EPERM; | 
|  |  | 
|  | *_buf = ptr; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int rtlbt_parse_firmware(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev, | 
|  | unsigned char **_buf) | 
|  | { | 
|  | static const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; | 
|  | struct btrealtek_data *coredump_info = hci_get_priv(hdev); | 
|  | struct rtl_epatch_header *epatch_info; | 
|  | unsigned char *buf; | 
|  | int i, len; | 
|  | size_t min_size; | 
|  | u8 opcode, length, data; | 
|  | int project_id = -1; | 
|  | const unsigned char *fwptr, *chip_id_base; | 
|  | const unsigned char *patch_length_base, *patch_offset_base; | 
|  | u32 patch_offset = 0; | 
|  | u16 patch_length, num_patches; | 
|  | static const struct { | 
|  | __u16 lmp_subver; | 
|  | __u8 id; | 
|  | } project_id_to_lmp_subver[] = { | 
|  | { RTL_ROM_LMP_8723A, 0 }, | 
|  | { RTL_ROM_LMP_8723B, 1 }, | 
|  | { RTL_ROM_LMP_8821A, 2 }, | 
|  | { RTL_ROM_LMP_8761A, 3 }, | 
|  | { RTL_ROM_LMP_8703B, 7 }, | 
|  | { RTL_ROM_LMP_8822B, 8 }, | 
|  | { RTL_ROM_LMP_8723B, 9 },	/* 8723D */ | 
|  | { RTL_ROM_LMP_8821A, 10 },	/* 8821C */ | 
|  | { RTL_ROM_LMP_8822B, 13 },	/* 8822C */ | 
|  | { RTL_ROM_LMP_8761A, 14 },	/* 8761B */ | 
|  | { RTL_ROM_LMP_8852A, 18 },	/* 8852A */ | 
|  | { RTL_ROM_LMP_8852A, 20 },	/* 8852B */ | 
|  | { RTL_ROM_LMP_8852A, 25 },	/* 8852C */ | 
|  | { RTL_ROM_LMP_8851B, 36 },	/* 8851B */ | 
|  | }; | 
|  |  | 
|  | if (btrtl_dev->fw_len <= 8) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8)) | 
|  | min_size = sizeof(struct rtl_epatch_header) + | 
|  | sizeof(extension_sig) + 3; | 
|  | else if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE_V2, 8)) | 
|  | min_size = sizeof(struct rtl_epatch_header_v2) + | 
|  | sizeof(extension_sig) + 3; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | if (btrtl_dev->fw_len < min_size) | 
|  | return -EINVAL; | 
|  |  | 
|  | fwptr = btrtl_dev->fw_data + btrtl_dev->fw_len - sizeof(extension_sig); | 
|  | if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { | 
|  | rtl_dev_err(hdev, "extension section signature mismatch"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Loop from the end of the firmware parsing instructions, until | 
|  | * we find an instruction that identifies the "project ID" for the | 
|  | * hardware supported by this firwmare file. | 
|  | * Once we have that, we double-check that project_id is suitable | 
|  | * for the hardware we are working with. | 
|  | */ | 
|  | while (fwptr >= btrtl_dev->fw_data + (sizeof(*epatch_info) + 3)) { | 
|  | opcode = *--fwptr; | 
|  | length = *--fwptr; | 
|  | data = *--fwptr; | 
|  |  | 
|  | BT_DBG("check op=%x len=%x data=%x", opcode, length, data); | 
|  |  | 
|  | if (opcode == 0xff) /* EOF */ | 
|  | break; | 
|  |  | 
|  | if (length == 0) { | 
|  | rtl_dev_err(hdev, "found instruction with length 0"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (opcode == 0 && length == 1) { | 
|  | project_id = data; | 
|  | break; | 
|  | } | 
|  |  | 
|  | fwptr -= length; | 
|  | } | 
|  |  | 
|  | if (project_id < 0) { | 
|  | rtl_dev_err(hdev, "failed to find version instruction"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Find project_id in table */ | 
|  | for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) { | 
|  | if (project_id == project_id_to_lmp_subver[i].id) { | 
|  | btrtl_dev->project_id = project_id; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) { | 
|  | rtl_dev_err(hdev, "unknown project id %d", project_id); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (btrtl_dev->ic_info->lmp_subver != | 
|  | project_id_to_lmp_subver[i].lmp_subver) { | 
|  | rtl_dev_err(hdev, "firmware is for %x but this is a %x", | 
|  | project_id_to_lmp_subver[i].lmp_subver, | 
|  | btrtl_dev->ic_info->lmp_subver); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8) != 0) { | 
|  | if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE_V2, 8)) | 
|  | return rtlbt_parse_firmware_v2(hdev, btrtl_dev, _buf); | 
|  | rtl_dev_err(hdev, "bad EPATCH signature"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | epatch_info = (struct rtl_epatch_header *)btrtl_dev->fw_data; | 
|  | num_patches = le16_to_cpu(epatch_info->num_patches); | 
|  |  | 
|  | BT_DBG("fw_version=%x, num_patches=%d", | 
|  | le32_to_cpu(epatch_info->fw_version), num_patches); | 
|  | coredump_info->rtl_dump.fw_version = le32_to_cpu(epatch_info->fw_version); | 
|  |  | 
|  | /* After the rtl_epatch_header there is a funky patch metadata section. | 
|  | * Assuming 2 patches, the layout is: | 
|  | * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 | 
|  | * | 
|  | * Find the right patch for this chip. | 
|  | */ | 
|  | min_size += 8 * num_patches; | 
|  | if (btrtl_dev->fw_len < min_size) | 
|  | return -EINVAL; | 
|  |  | 
|  | chip_id_base = btrtl_dev->fw_data + sizeof(struct rtl_epatch_header); | 
|  | patch_length_base = chip_id_base + (sizeof(u16) * num_patches); | 
|  | patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); | 
|  | for (i = 0; i < num_patches; i++) { | 
|  | u16 chip_id = get_unaligned_le16(chip_id_base + | 
|  | (i * sizeof(u16))); | 
|  | if (chip_id == btrtl_dev->rom_version + 1) { | 
|  | patch_length = get_unaligned_le16(patch_length_base + | 
|  | (i * sizeof(u16))); | 
|  | patch_offset = get_unaligned_le32(patch_offset_base + | 
|  | (i * sizeof(u32))); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!patch_offset) { | 
|  | rtl_dev_err(hdev, "didn't find patch for chip id %d", | 
|  | btrtl_dev->rom_version); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); | 
|  | min_size = patch_offset + patch_length; | 
|  | if (btrtl_dev->fw_len < min_size) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Copy the firmware into a new buffer and write the version at | 
|  | * the end. | 
|  | */ | 
|  | len = patch_length; | 
|  | buf = kvmalloc(patch_length, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memcpy(buf, btrtl_dev->fw_data + patch_offset, patch_length - 4); | 
|  | memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); | 
|  |  | 
|  | *_buf = buf; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int rtl_download_firmware(struct hci_dev *hdev, | 
|  | const unsigned char *data, int fw_len) | 
|  | { | 
|  | struct rtl_download_cmd *dl_cmd; | 
|  | int frag_num = fw_len / RTL_FRAG_LEN + 1; | 
|  | int frag_len = RTL_FRAG_LEN; | 
|  | int ret = 0; | 
|  | int i; | 
|  | int j = 0; | 
|  | struct sk_buff *skb; | 
|  | struct hci_rp_read_local_version *rp; | 
|  |  | 
|  | dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); | 
|  | if (!dl_cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < frag_num; i++) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | dl_cmd->index = j++; | 
|  | if (dl_cmd->index == 0x7f) | 
|  | j = 1; | 
|  |  | 
|  | if (i == (frag_num - 1)) { | 
|  | dl_cmd->index |= 0x80; /* data end */ | 
|  | frag_len = fw_len % RTL_FRAG_LEN; | 
|  | } | 
|  | rtl_dev_dbg(hdev, "download fw (%d/%d). index = %d", i, | 
|  | frag_num, dl_cmd->index); | 
|  | memcpy(dl_cmd->data, data, frag_len); | 
|  |  | 
|  | /* Send download command */ | 
|  | skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, | 
|  | HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | rtl_dev_err(hdev, "download fw command failed (%ld)", | 
|  | PTR_ERR(skb)); | 
|  | ret = PTR_ERR(skb); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (skb->len != sizeof(struct rtl_download_response)) { | 
|  | rtl_dev_err(hdev, "download fw event length mismatch"); | 
|  | kfree_skb(skb); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  | data += RTL_FRAG_LEN; | 
|  | } | 
|  |  | 
|  | skb = btrtl_read_local_version(hdev); | 
|  | if (IS_ERR(skb)) { | 
|  | ret = PTR_ERR(skb); | 
|  | rtl_dev_err(hdev, "read local version failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | rp = (struct hci_rp_read_local_version *)skb->data; | 
|  | rtl_dev_info(hdev, "fw version 0x%04x%04x", | 
|  | __le16_to_cpu(rp->hci_rev), __le16_to_cpu(rp->lmp_subver)); | 
|  | kfree_skb(skb); | 
|  |  | 
|  | out: | 
|  | kfree(dl_cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int rtl_load_file(struct hci_dev *hdev, const char *name, u8 **buff) | 
|  | { | 
|  | const struct firmware *fw; | 
|  | int ret; | 
|  |  | 
|  | rtl_dev_info(hdev, "loading %s", name); | 
|  | ret = request_firmware(&fw, name, &hdev->dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | ret = fw->size; | 
|  | *buff = kvmalloc(fw->size, GFP_KERNEL); | 
|  | if (*buff) | 
|  | memcpy(*buff, fw->data, ret); | 
|  | else | 
|  | ret = -ENOMEM; | 
|  |  | 
|  | release_firmware(fw); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int btrtl_setup_rtl8723a(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | if (btrtl_dev->fw_len < 8) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Check that the firmware doesn't have the epatch signature | 
|  | * (which is only for RTL8723B and newer). | 
|  | */ | 
|  | if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8)) { | 
|  | rtl_dev_err(hdev, "unexpected EPATCH signature!"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return rtl_download_firmware(hdev, btrtl_dev->fw_data, | 
|  | btrtl_dev->fw_len); | 
|  | } | 
|  |  | 
|  | static int btrtl_setup_rtl8723b(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | unsigned char *fw_data = NULL; | 
|  | int ret; | 
|  | u8 *tbuff; | 
|  |  | 
|  | ret = rtlbt_parse_firmware(hdev, btrtl_dev, &fw_data); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | if (btrtl_dev->cfg_len > 0) { | 
|  | tbuff = kvzalloc(ret + btrtl_dev->cfg_len, GFP_KERNEL); | 
|  | if (!tbuff) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(tbuff, fw_data, ret); | 
|  | kvfree(fw_data); | 
|  |  | 
|  | memcpy(tbuff + ret, btrtl_dev->cfg_data, btrtl_dev->cfg_len); | 
|  | ret += btrtl_dev->cfg_len; | 
|  |  | 
|  | fw_data = tbuff; | 
|  | } | 
|  |  | 
|  | rtl_dev_info(hdev, "cfg_sz %d, total sz %d", btrtl_dev->cfg_len, ret); | 
|  |  | 
|  | ret = rtl_download_firmware(hdev, fw_data, ret); | 
|  |  | 
|  | out: | 
|  | kvfree(fw_data); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void btrtl_coredump(struct hci_dev *hdev) | 
|  | { | 
|  | static const u8 param[] = { 0x00, 0x00 }; | 
|  |  | 
|  | __hci_cmd_send(hdev, RTL_VSC_OP_COREDUMP, sizeof(param), param); | 
|  | } | 
|  |  | 
|  | static void btrtl_dmp_hdr(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct btrealtek_data *coredump_info = hci_get_priv(hdev); | 
|  | char buf[80]; | 
|  |  | 
|  | if (coredump_info->rtl_dump.controller) | 
|  | snprintf(buf, sizeof(buf), "Controller Name: %s\n", | 
|  | coredump_info->rtl_dump.controller); | 
|  | else | 
|  | snprintf(buf, sizeof(buf), "Controller Name: Unknown\n"); | 
|  | skb_put_data(skb, buf, strlen(buf)); | 
|  |  | 
|  | snprintf(buf, sizeof(buf), "Firmware Version: 0x%X\n", | 
|  | coredump_info->rtl_dump.fw_version); | 
|  | skb_put_data(skb, buf, strlen(buf)); | 
|  |  | 
|  | snprintf(buf, sizeof(buf), "Driver: %s\n", coredump_info->rtl_dump.driver_name); | 
|  | skb_put_data(skb, buf, strlen(buf)); | 
|  |  | 
|  | snprintf(buf, sizeof(buf), "Vendor: Realtek\n"); | 
|  | skb_put_data(skb, buf, strlen(buf)); | 
|  | } | 
|  |  | 
|  | static int btrtl_register_devcoredump_support(struct hci_dev *hdev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = hci_devcd_register(hdev, btrtl_coredump, btrtl_dmp_hdr, NULL); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void btrtl_set_driver_name(struct hci_dev *hdev, const char *driver_name) | 
|  | { | 
|  | struct btrealtek_data *coredump_info = hci_get_priv(hdev); | 
|  |  | 
|  | coredump_info->rtl_dump.driver_name = driver_name; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_set_driver_name); | 
|  |  | 
|  | static bool rtl_has_chip_type(u16 lmp_subver) | 
|  | { | 
|  | switch (lmp_subver) { | 
|  | case RTL_ROM_LMP_8703B: | 
|  | return true; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return  false; | 
|  | } | 
|  |  | 
|  | static int rtl_read_chip_type(struct hci_dev *hdev, u8 *type) | 
|  | { | 
|  | struct rtl_chip_type_evt *chip_type; | 
|  | struct sk_buff *skb; | 
|  | const unsigned char cmd_buf[] = {0x00, 0x94, 0xa0, 0x00, 0xb0}; | 
|  |  | 
|  | /* Read RTL chip type command */ | 
|  | skb = __hci_cmd_sync(hdev, 0xfc61, 5, cmd_buf, HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | rtl_dev_err(hdev, "Read chip type failed (%ld)", | 
|  | PTR_ERR(skb)); | 
|  | return PTR_ERR(skb); | 
|  | } | 
|  |  | 
|  | chip_type = skb_pull_data(skb, sizeof(*chip_type)); | 
|  | if (!chip_type) { | 
|  | rtl_dev_err(hdev, "RTL chip type event length mismatch"); | 
|  | kfree_skb(skb); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | rtl_dev_info(hdev, "chip_type status=%x type=%x", | 
|  | chip_type->status, chip_type->type); | 
|  |  | 
|  | *type = chip_type->type & 0x0f; | 
|  |  | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void btrtl_free(struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | struct rtl_subsection *entry, *tmp; | 
|  |  | 
|  | kvfree(btrtl_dev->fw_data); | 
|  | kvfree(btrtl_dev->cfg_data); | 
|  |  | 
|  | list_for_each_entry_safe(entry, tmp, &btrtl_dev->patch_subsecs, list) { | 
|  | list_del(&entry->list); | 
|  | kfree(entry); | 
|  | } | 
|  |  | 
|  | kfree(btrtl_dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_free); | 
|  |  | 
|  | struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, | 
|  | const char *postfix) | 
|  | { | 
|  | struct btrealtek_data *coredump_info = hci_get_priv(hdev); | 
|  | struct btrtl_device_info *btrtl_dev; | 
|  | struct sk_buff *skb; | 
|  | struct hci_rp_read_local_version *resp; | 
|  | struct hci_command_hdr *cmd; | 
|  | char fw_name[40]; | 
|  | char cfg_name[40]; | 
|  | u16 hci_rev, lmp_subver; | 
|  | u8 hci_ver, lmp_ver, chip_type = 0; | 
|  | int ret; | 
|  | u8 reg_val[2]; | 
|  |  | 
|  | btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL); | 
|  | if (!btrtl_dev) { | 
|  | ret = -ENOMEM; | 
|  | goto err_alloc; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&btrtl_dev->patch_subsecs); | 
|  |  | 
|  | check_version: | 
|  | ret = btrtl_vendor_read_reg16(hdev, RTL_CHIP_SUBVER, reg_val); | 
|  | if (ret < 0) | 
|  | goto err_free; | 
|  | lmp_subver = get_unaligned_le16(reg_val); | 
|  |  | 
|  | if (lmp_subver == RTL_ROM_LMP_8822B) { | 
|  | ret = btrtl_vendor_read_reg16(hdev, RTL_CHIP_REV, reg_val); | 
|  | if (ret < 0) | 
|  | goto err_free; | 
|  | hci_rev = get_unaligned_le16(reg_val); | 
|  |  | 
|  | /* 8822E */ | 
|  | if (hci_rev == 0x000e) { | 
|  | hci_ver = 0x0c; | 
|  | lmp_ver = 0x0c; | 
|  | btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, | 
|  | hci_ver, hdev->bus, | 
|  | chip_type); | 
|  | goto next; | 
|  | } | 
|  | } | 
|  |  | 
|  | skb = btrtl_read_local_version(hdev); | 
|  | if (IS_ERR(skb)) { | 
|  | ret = PTR_ERR(skb); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | resp = (struct hci_rp_read_local_version *)skb->data; | 
|  |  | 
|  | hci_ver    = resp->hci_ver; | 
|  | hci_rev    = le16_to_cpu(resp->hci_rev); | 
|  | lmp_ver    = resp->lmp_ver; | 
|  | lmp_subver = le16_to_cpu(resp->lmp_subver); | 
|  |  | 
|  | kfree_skb(skb); | 
|  |  | 
|  | if (rtl_has_chip_type(lmp_subver)) { | 
|  | ret = rtl_read_chip_type(hdev, &chip_type); | 
|  | if (ret) | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver, | 
|  | hdev->bus, chip_type); | 
|  |  | 
|  | next: | 
|  | rtl_dev_info(hdev, "examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x lmp_subver=%04x", | 
|  | hci_ver, hci_rev, | 
|  | lmp_ver, lmp_subver); | 
|  |  | 
|  | if (!btrtl_dev->ic_info && !btrtl_dev->drop_fw) | 
|  | btrtl_dev->drop_fw = true; | 
|  | else | 
|  | btrtl_dev->drop_fw = false; | 
|  |  | 
|  | if (btrtl_dev->drop_fw) { | 
|  | skb = bt_skb_alloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!skb) | 
|  | goto err_free; | 
|  |  | 
|  | cmd = skb_put(skb, HCI_COMMAND_HDR_SIZE); | 
|  | cmd->opcode = cpu_to_le16(0xfc66); | 
|  | cmd->plen = 0; | 
|  |  | 
|  | hci_skb_pkt_type(skb) = HCI_COMMAND_PKT; | 
|  |  | 
|  | ret = hdev->send(hdev, skb); | 
|  | if (ret < 0) { | 
|  | bt_dev_err(hdev, "sending frame failed (%d)", ret); | 
|  | kfree_skb(skb); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | /* Ensure the above vendor command is sent to controller and | 
|  | * process has done. | 
|  | */ | 
|  | msleep(200); | 
|  |  | 
|  | goto check_version; | 
|  | } | 
|  |  | 
|  | if (!btrtl_dev->ic_info) { | 
|  | rtl_dev_info(hdev, "unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x", | 
|  | lmp_subver, hci_rev, hci_ver); | 
|  | return btrtl_dev; | 
|  | } | 
|  |  | 
|  | if (btrtl_dev->ic_info->has_rom_version) { | 
|  | ret = rtl_read_rom_version(hdev, &btrtl_dev->rom_version); | 
|  | if (ret) | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (!btrtl_dev->ic_info->fw_name) { | 
|  | ret = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | btrtl_dev->fw_len = -EIO; | 
|  | if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) { | 
|  | snprintf(fw_name, sizeof(fw_name), "%s_v2.bin", | 
|  | btrtl_dev->ic_info->fw_name); | 
|  | btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, | 
|  | &btrtl_dev->fw_data); | 
|  | } | 
|  |  | 
|  | if (btrtl_dev->fw_len < 0) { | 
|  | snprintf(fw_name, sizeof(fw_name), "%s.bin", | 
|  | btrtl_dev->ic_info->fw_name); | 
|  | btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, | 
|  | &btrtl_dev->fw_data); | 
|  | } | 
|  |  | 
|  | if (btrtl_dev->fw_len < 0) { | 
|  | rtl_dev_err(hdev, "firmware file %s not found", | 
|  | btrtl_dev->ic_info->fw_name); | 
|  | ret = btrtl_dev->fw_len; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (btrtl_dev->ic_info->cfg_name) { | 
|  | if (postfix) { | 
|  | snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin", | 
|  | btrtl_dev->ic_info->cfg_name, postfix); | 
|  | } else { | 
|  | snprintf(cfg_name, sizeof(cfg_name), "%s.bin", | 
|  | btrtl_dev->ic_info->cfg_name); | 
|  | } | 
|  | btrtl_dev->cfg_len = rtl_load_file(hdev, cfg_name, | 
|  | &btrtl_dev->cfg_data); | 
|  | if (btrtl_dev->ic_info->config_needed && | 
|  | btrtl_dev->cfg_len <= 0) { | 
|  | rtl_dev_err(hdev, "mandatory config file %s not found", | 
|  | btrtl_dev->ic_info->cfg_name); | 
|  | ret = btrtl_dev->cfg_len; | 
|  | goto err_free; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The following chips supports the Microsoft vendor extension, | 
|  | * therefore set the corresponding VsMsftOpCode. | 
|  | */ | 
|  | if (btrtl_dev->ic_info->has_msft_ext) | 
|  | hci_set_msft_opcode(hdev, 0xFCF0); | 
|  |  | 
|  | if (btrtl_dev->ic_info) | 
|  | coredump_info->rtl_dump.controller = btrtl_dev->ic_info->hw_info; | 
|  |  | 
|  | return btrtl_dev; | 
|  |  | 
|  | err_free: | 
|  | btrtl_free(btrtl_dev); | 
|  | err_alloc: | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_initialize); | 
|  |  | 
|  | int btrtl_download_firmware(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | /* Match a set of subver values that correspond to stock firmware, | 
|  | * which is not compatible with standard btusb. | 
|  | * If matched, upload an alternative firmware that does conform to | 
|  | * standard btusb. Once that firmware is uploaded, the subver changes | 
|  | * to a different value. | 
|  | */ | 
|  | if (!btrtl_dev->ic_info) { | 
|  | rtl_dev_info(hdev, "assuming no firmware upload needed"); | 
|  | err = 0; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | switch (btrtl_dev->ic_info->lmp_subver) { | 
|  | case RTL_ROM_LMP_8723A: | 
|  | err = btrtl_setup_rtl8723a(hdev, btrtl_dev); | 
|  | break; | 
|  | case RTL_ROM_LMP_8723B: | 
|  | case RTL_ROM_LMP_8821A: | 
|  | case RTL_ROM_LMP_8761A: | 
|  | case RTL_ROM_LMP_8822B: | 
|  | case RTL_ROM_LMP_8852A: | 
|  | case RTL_ROM_LMP_8703B: | 
|  | case RTL_ROM_LMP_8851B: | 
|  | err = btrtl_setup_rtl8723b(hdev, btrtl_dev); | 
|  | break; | 
|  | default: | 
|  | rtl_dev_info(hdev, "assuming no firmware upload needed"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | done: | 
|  | if (!err) | 
|  | err = btrtl_register_devcoredump_support(hdev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_download_firmware); | 
|  |  | 
|  | void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) | 
|  | { | 
|  | /* Enable controller to do both LE scan and BR/EDR inquiry | 
|  | * simultaneously. | 
|  | */ | 
|  | set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); | 
|  |  | 
|  | /* Enable central-peripheral role (able to create new connections with | 
|  | * an existing connection in slave role). | 
|  | */ | 
|  | /* Enable WBS supported for the specific Realtek devices. */ | 
|  | switch (btrtl_dev->project_id) { | 
|  | case CHIP_ID_8822C: | 
|  | case CHIP_ID_8852A: | 
|  | case CHIP_ID_8852B: | 
|  | case CHIP_ID_8852C: | 
|  | case CHIP_ID_8851B: | 
|  | set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); | 
|  | set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); | 
|  |  | 
|  | /* RTL8852C needs to transmit mSBC data continuously without | 
|  | * the zero length of USB packets for the ALT 6 supported chips | 
|  | */ | 
|  | if (btrtl_dev->project_id == CHIP_ID_8852C) | 
|  | btrealtek_set_flag(hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP); | 
|  |  | 
|  | if (btrtl_dev->project_id == CHIP_ID_8852A || | 
|  | btrtl_dev->project_id == CHIP_ID_8852C) | 
|  | set_bit(HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER, &hdev->quirks); | 
|  |  | 
|  | hci_set_aosp_capable(hdev); | 
|  | break; | 
|  | default: | 
|  | rtl_dev_dbg(hdev, "Central-peripheral role not enabled."); | 
|  | rtl_dev_dbg(hdev, "WBS supported not enabled."); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!btrtl_dev->ic_info) | 
|  | return; | 
|  |  | 
|  | switch (btrtl_dev->ic_info->lmp_subver) { | 
|  | case RTL_ROM_LMP_8703B: | 
|  | /* 8723CS reports two pages for local ext features, | 
|  | * but it doesn't support any features from page 2 - | 
|  | * it either responds with garbage or with error status | 
|  | */ | 
|  | set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2, | 
|  | &hdev->quirks); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_set_quirks); | 
|  |  | 
|  | int btrtl_setup_realtek(struct hci_dev *hdev) | 
|  | { | 
|  | struct btrtl_device_info *btrtl_dev; | 
|  | int ret; | 
|  |  | 
|  | btrtl_dev = btrtl_initialize(hdev, NULL); | 
|  | if (IS_ERR(btrtl_dev)) | 
|  | return PTR_ERR(btrtl_dev); | 
|  |  | 
|  | ret = btrtl_download_firmware(hdev, btrtl_dev); | 
|  |  | 
|  | btrtl_set_quirks(hdev, btrtl_dev); | 
|  |  | 
|  | btrtl_free(btrtl_dev); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_setup_realtek); | 
|  |  | 
|  | int btrtl_shutdown_realtek(struct hci_dev *hdev) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int ret; | 
|  |  | 
|  | /* According to the vendor driver, BT must be reset on close to avoid | 
|  | * firmware crash. | 
|  | */ | 
|  | skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | ret = PTR_ERR(skb); | 
|  | bt_dev_err(hdev, "HCI reset during shutdown failed"); | 
|  | return ret; | 
|  | } | 
|  | kfree_skb(skb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_shutdown_realtek); | 
|  |  | 
|  | static unsigned int btrtl_convert_baudrate(u32 device_baudrate) | 
|  | { | 
|  | switch (device_baudrate) { | 
|  | case 0x0252a00a: | 
|  | return 230400; | 
|  |  | 
|  | case 0x05f75004: | 
|  | return 921600; | 
|  |  | 
|  | case 0x00005004: | 
|  | return 1000000; | 
|  |  | 
|  | case 0x04928002: | 
|  | case 0x01128002: | 
|  | return 1500000; | 
|  |  | 
|  | case 0x00005002: | 
|  | return 2000000; | 
|  |  | 
|  | case 0x0000b001: | 
|  | return 2500000; | 
|  |  | 
|  | case 0x04928001: | 
|  | return 3000000; | 
|  |  | 
|  | case 0x052a6001: | 
|  | return 3500000; | 
|  |  | 
|  | case 0x00005001: | 
|  | return 4000000; | 
|  |  | 
|  | case 0x0252c014: | 
|  | default: | 
|  | return 115200; | 
|  | } | 
|  | } | 
|  |  | 
|  | int btrtl_get_uart_settings(struct hci_dev *hdev, | 
|  | struct btrtl_device_info *btrtl_dev, | 
|  | unsigned int *controller_baudrate, | 
|  | u32 *device_baudrate, bool *flow_control) | 
|  | { | 
|  | struct rtl_vendor_config *config; | 
|  | struct rtl_vendor_config_entry *entry; | 
|  | int i, total_data_len; | 
|  | bool found = false; | 
|  |  | 
|  | total_data_len = btrtl_dev->cfg_len - sizeof(*config); | 
|  | if (total_data_len <= 0) { | 
|  | rtl_dev_warn(hdev, "no config loaded"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | config = (struct rtl_vendor_config *)btrtl_dev->cfg_data; | 
|  | if (le32_to_cpu(config->signature) != RTL_CONFIG_MAGIC) { | 
|  | rtl_dev_err(hdev, "invalid config magic"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (total_data_len < le16_to_cpu(config->total_len)) { | 
|  | rtl_dev_err(hdev, "config is too short"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < total_data_len; ) { | 
|  | entry = ((void *)config->entry) + i; | 
|  |  | 
|  | switch (le16_to_cpu(entry->offset)) { | 
|  | case 0xc: | 
|  | if (entry->len < sizeof(*device_baudrate)) { | 
|  | rtl_dev_err(hdev, "invalid UART config entry"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | *device_baudrate = get_unaligned_le32(entry->data); | 
|  | *controller_baudrate = btrtl_convert_baudrate( | 
|  | *device_baudrate); | 
|  |  | 
|  | if (entry->len >= 13) | 
|  | *flow_control = !!(entry->data[12] & BIT(2)); | 
|  | else | 
|  | *flow_control = false; | 
|  |  | 
|  | found = true; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | rtl_dev_dbg(hdev, "skipping config entry 0x%x (len %u)", | 
|  | le16_to_cpu(entry->offset), entry->len); | 
|  | break; | 
|  | } | 
|  |  | 
|  | i += sizeof(*entry) + entry->len; | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | rtl_dev_err(hdev, "no UART config entry found"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | rtl_dev_dbg(hdev, "device baudrate = 0x%08x", *device_baudrate); | 
|  | rtl_dev_dbg(hdev, "controller baudrate = %u", *controller_baudrate); | 
|  | rtl_dev_dbg(hdev, "flow control %d", *flow_control); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(btrtl_get_uart_settings); | 
|  |  | 
|  | MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>"); | 
|  | MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION); | 
|  | MODULE_VERSION(VERSION); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723d_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723d_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761b_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761b_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761bu_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8761bu_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821c_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821c_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821cs_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8821cs_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822cs_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822cs_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822cu_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8822cu_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); | 
|  | MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); |