|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * gpiolib support for Wolfson WM8994 | 
|  | * | 
|  | * Copyright 2009 Wolfson Microelectronics PLC. | 
|  | * | 
|  | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | #include <linux/mfd/wm8994/core.h> | 
|  | #include <linux/mfd/wm8994/pdata.h> | 
|  | #include <linux/mfd/wm8994/gpio.h> | 
|  | #include <linux/mfd/wm8994/registers.h> | 
|  |  | 
|  | struct wm8994_gpio { | 
|  | struct wm8994 *wm8994; | 
|  | struct gpio_chip gpio_chip; | 
|  | }; | 
|  |  | 
|  | static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | switch (wm8994->type) { | 
|  | case WM8958: | 
|  | switch (offset) { | 
|  | case 1: | 
|  | case 2: | 
|  | case 3: | 
|  | case 4: | 
|  | case 6: | 
|  | return -EINVAL; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | 
|  | WM8994_GPN_DIR, WM8994_GPN_DIR); | 
|  | } | 
|  |  | 
|  | static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  | int ret; | 
|  |  | 
|  | ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (ret & WM8994_GPN_LVL) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8994_gpio_direction_out(struct gpio_chip *chip, | 
|  | unsigned offset, int value) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | if (value) | 
|  | value = WM8994_GPN_LVL; | 
|  |  | 
|  | return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | 
|  | WM8994_GPN_DIR | WM8994_GPN_LVL, value); | 
|  | } | 
|  |  | 
|  | static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | if (value) | 
|  | value = WM8994_GPN_LVL; | 
|  |  | 
|  | wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value); | 
|  | } | 
|  |  | 
|  | static int wm8994_gpio_set_config(struct gpio_chip *chip, unsigned int offset, | 
|  | unsigned long config) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | switch (pinconf_to_config_param(config)) { | 
|  | case PIN_CONFIG_DRIVE_OPEN_DRAIN: | 
|  | return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | 
|  | WM8994_GPN_OP_CFG_MASK, | 
|  | WM8994_GPN_OP_CFG); | 
|  | case PIN_CONFIG_DRIVE_PUSH_PULL: | 
|  | return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, | 
|  | WM8994_GPN_OP_CFG_MASK, 0); | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -ENOTSUPP; | 
|  | } | 
|  |  | 
|  | static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  |  | 
|  | return regmap_irq_get_virq(wm8994->irq_data, offset); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | static const char *wm8994_gpio_fn(u16 fn) | 
|  | { | 
|  | switch (fn) { | 
|  | case WM8994_GP_FN_PIN_SPECIFIC: | 
|  | return "pin-specific"; | 
|  | case WM8994_GP_FN_GPIO: | 
|  | return "GPIO"; | 
|  | case WM8994_GP_FN_SDOUT: | 
|  | return "SDOUT"; | 
|  | case WM8994_GP_FN_IRQ: | 
|  | return "IRQ"; | 
|  | case WM8994_GP_FN_TEMPERATURE: | 
|  | return "Temperature"; | 
|  | case WM8994_GP_FN_MICBIAS1_DET: | 
|  | return "MICBIAS1 detect"; | 
|  | case WM8994_GP_FN_MICBIAS1_SHORT: | 
|  | return "MICBIAS1 short"; | 
|  | case WM8994_GP_FN_MICBIAS2_DET: | 
|  | return "MICBIAS2 detect"; | 
|  | case WM8994_GP_FN_MICBIAS2_SHORT: | 
|  | return "MICBIAS2 short"; | 
|  | case WM8994_GP_FN_FLL1_LOCK: | 
|  | return "FLL1 lock"; | 
|  | case WM8994_GP_FN_FLL2_LOCK: | 
|  | return "FLL2 lock"; | 
|  | case WM8994_GP_FN_SRC1_LOCK: | 
|  | return "SRC1 lock"; | 
|  | case WM8994_GP_FN_SRC2_LOCK: | 
|  | return "SRC2 lock"; | 
|  | case WM8994_GP_FN_DRC1_ACT: | 
|  | return "DRC1 activity"; | 
|  | case WM8994_GP_FN_DRC2_ACT: | 
|  | return "DRC2 activity"; | 
|  | case WM8994_GP_FN_DRC3_ACT: | 
|  | return "DRC3 activity"; | 
|  | case WM8994_GP_FN_WSEQ_STATUS: | 
|  | return "Write sequencer"; | 
|  | case WM8994_GP_FN_FIFO_ERROR: | 
|  | return "FIFO error"; | 
|  | case WM8994_GP_FN_OPCLK: | 
|  | return "OPCLK"; | 
|  | case WM8994_GP_FN_THW: | 
|  | return "Thermal warning"; | 
|  | case WM8994_GP_FN_DCS_DONE: | 
|  | return "DC servo"; | 
|  | case WM8994_GP_FN_FLL1_OUT: | 
|  | return "FLL1 output"; | 
|  | case WM8994_GP_FN_FLL2_OUT: | 
|  | return "FLL1 output"; | 
|  | default: | 
|  | return "Unknown"; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | 
|  | { | 
|  | struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip); | 
|  | struct wm8994 *wm8994 = wm8994_gpio->wm8994; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < chip->ngpio; i++) { | 
|  | int gpio = i + chip->base; | 
|  | int reg; | 
|  | const char *label; | 
|  |  | 
|  | /* We report the GPIO even if it's not requested since | 
|  | * we're also reporting things like alternate | 
|  | * functions which apply even when the GPIO is not in | 
|  | * use as a GPIO. | 
|  | */ | 
|  | label = gpiochip_is_requested(chip, i); | 
|  | if (!label) | 
|  | label = "Unrequested"; | 
|  |  | 
|  | seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); | 
|  |  | 
|  | reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i); | 
|  | if (reg < 0) { | 
|  | dev_err(wm8994->dev, | 
|  | "GPIO control %d read failed: %d\n", | 
|  | gpio, reg); | 
|  | seq_printf(s, "\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (reg & WM8994_GPN_DIR) | 
|  | seq_printf(s, "in "); | 
|  | else | 
|  | seq_printf(s, "out "); | 
|  |  | 
|  | if (reg & WM8994_GPN_PU) | 
|  | seq_printf(s, "pull up "); | 
|  |  | 
|  | if (reg & WM8994_GPN_PD) | 
|  | seq_printf(s, "pull down "); | 
|  |  | 
|  | if (reg & WM8994_GPN_POL) | 
|  | seq_printf(s, "inverted "); | 
|  | else | 
|  | seq_printf(s, "noninverted "); | 
|  |  | 
|  | if (reg & WM8994_GPN_OP_CFG) | 
|  | seq_printf(s, "open drain "); | 
|  | else | 
|  | seq_printf(s, "push-pull "); | 
|  |  | 
|  | seq_printf(s, "%s (%x)\n", | 
|  | wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg); | 
|  | } | 
|  | } | 
|  | #else | 
|  | #define wm8994_gpio_dbg_show NULL | 
|  | #endif | 
|  |  | 
|  | static const struct gpio_chip template_chip = { | 
|  | .label			= "wm8994", | 
|  | .owner			= THIS_MODULE, | 
|  | .request		= wm8994_gpio_request, | 
|  | .direction_input	= wm8994_gpio_direction_in, | 
|  | .get			= wm8994_gpio_get, | 
|  | .direction_output	= wm8994_gpio_direction_out, | 
|  | .set			= wm8994_gpio_set, | 
|  | .set_config		= wm8994_gpio_set_config, | 
|  | .to_irq			= wm8994_gpio_to_irq, | 
|  | .dbg_show		= wm8994_gpio_dbg_show, | 
|  | .can_sleep		= true, | 
|  | }; | 
|  |  | 
|  | static int wm8994_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); | 
|  | struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev); | 
|  | struct wm8994_gpio *wm8994_gpio; | 
|  |  | 
|  | wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio), | 
|  | GFP_KERNEL); | 
|  | if (wm8994_gpio == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wm8994_gpio->wm8994 = wm8994; | 
|  | wm8994_gpio->gpio_chip = template_chip; | 
|  | wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX; | 
|  | wm8994_gpio->gpio_chip.parent = &pdev->dev; | 
|  | if (pdata && pdata->gpio_base) | 
|  | wm8994_gpio->gpio_chip.base = pdata->gpio_base; | 
|  | else | 
|  | wm8994_gpio->gpio_chip.base = -1; | 
|  |  | 
|  | return devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip, wm8994_gpio); | 
|  | } | 
|  |  | 
|  | static struct platform_driver wm8994_gpio_driver = { | 
|  | .driver.name	= "wm8994-gpio", | 
|  | .probe		= wm8994_gpio_probe, | 
|  | }; | 
|  |  | 
|  | static int __init wm8994_gpio_init(void) | 
|  | { | 
|  | return platform_driver_register(&wm8994_gpio_driver); | 
|  | } | 
|  | subsys_initcall(wm8994_gpio_init); | 
|  |  | 
|  | static void __exit wm8994_gpio_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&wm8994_gpio_driver); | 
|  | } | 
|  | module_exit(wm8994_gpio_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
|  | MODULE_DESCRIPTION("GPIO interface for WM8994"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:wm8994-gpio"); |