|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | *  battery.c - ACPI Battery Driver (Revision: 2.0) | 
|  | * | 
|  | *  Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de> | 
|  | *  Copyright (C) 2004-2007 Vladimir Lebedev <vladimir.p.lebedev@intel.com> | 
|  | *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
|  | *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) "ACPI: battery: " fmt | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include <linux/unaligned.h> | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/power_supply.h> | 
|  |  | 
|  | #include <acpi/battery.h> | 
|  |  | 
|  | #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF | 
|  | #define ACPI_BATTERY_CAPACITY_VALID(capacity) \ | 
|  | ((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN) | 
|  |  | 
|  | #define ACPI_BATTERY_DEVICE_NAME	"Battery" | 
|  |  | 
|  | /* Battery power unit: 0 means mW, 1 means mA */ | 
|  | #define ACPI_BATTERY_POWER_UNIT_MA	1 | 
|  |  | 
|  | #define ACPI_BATTERY_STATE_DISCHARGING		0x1 | 
|  | #define ACPI_BATTERY_STATE_CHARGING		0x2 | 
|  | #define ACPI_BATTERY_STATE_CRITICAL		0x4 | 
|  | #define ACPI_BATTERY_STATE_CHARGE_LIMITING	0x8 | 
|  |  | 
|  | #define MAX_STRING_LENGTH	64 | 
|  |  | 
|  | MODULE_AUTHOR("Paul Diefenbaugh"); | 
|  | MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>"); | 
|  | MODULE_DESCRIPTION("ACPI Battery Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static int battery_bix_broken_package; | 
|  | static int battery_notification_delay_ms; | 
|  | static int battery_ac_is_broken; | 
|  | static unsigned int cache_time = 1000; | 
|  | module_param(cache_time, uint, 0644); | 
|  | MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); | 
|  |  | 
|  | static const struct acpi_device_id battery_device_ids[] = { | 
|  | {"PNP0C0A", 0}, | 
|  |  | 
|  | /* Microsoft Surface Go 3 */ | 
|  | {"MSHW0146", 0}, | 
|  |  | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(acpi, battery_device_ids); | 
|  |  | 
|  | enum { | 
|  | ACPI_BATTERY_ALARM_PRESENT, | 
|  | ACPI_BATTERY_XINFO_PRESENT, | 
|  | ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, | 
|  | /* On Lenovo Thinkpad models from 2010 and 2011, the power unit | 
|  | * switches between mWh and mAh depending on whether the system | 
|  | * is running on battery or not.  When mAh is the unit, most | 
|  | * reported values are incorrect and need to be adjusted by | 
|  | * 10000/design_voltage.  Verified on x201, t410, t410s, and x220. | 
|  | * Pre-2010 and 2012 models appear to always report in mWh and | 
|  | * are thus unaffected (tested with t42, t61, t500, x200, x300, | 
|  | * and x230).  Also, in mid-2012 Lenovo issued a BIOS update for | 
|  | *  the 2011 models that fixes the issue (tested on x220 with a | 
|  | * post-1.29 BIOS), but as of Nov. 2012, no such update is | 
|  | * available for the 2010 models. | 
|  | */ | 
|  | ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | /* for batteries reporting current capacity with design capacity | 
|  | * on a full charge, but showing degradation in full charge cap. | 
|  | */ | 
|  | ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, | 
|  | }; | 
|  |  | 
|  | struct acpi_battery { | 
|  | struct mutex lock; | 
|  | struct mutex sysfs_lock; | 
|  | struct power_supply *bat; | 
|  | struct power_supply_desc bat_desc; | 
|  | struct acpi_device *device; | 
|  | struct notifier_block pm_nb; | 
|  | struct list_head list; | 
|  | unsigned long update_time; | 
|  | int revision; | 
|  | int rate_now; | 
|  | int capacity_now; | 
|  | int voltage_now; | 
|  | int design_capacity; | 
|  | int full_charge_capacity; | 
|  | int technology; | 
|  | int design_voltage; | 
|  | int design_capacity_warning; | 
|  | int design_capacity_low; | 
|  | int cycle_count; | 
|  | int measurement_accuracy; | 
|  | int max_sampling_time; | 
|  | int min_sampling_time; | 
|  | int max_averaging_interval; | 
|  | int min_averaging_interval; | 
|  | int capacity_granularity_1; | 
|  | int capacity_granularity_2; | 
|  | int alarm; | 
|  | char model_number[MAX_STRING_LENGTH]; | 
|  | char serial_number[MAX_STRING_LENGTH]; | 
|  | char type[MAX_STRING_LENGTH]; | 
|  | char oem_info[MAX_STRING_LENGTH]; | 
|  | int state; | 
|  | int power_unit; | 
|  | unsigned long flags; | 
|  | }; | 
|  |  | 
|  | #define to_acpi_battery(x) power_supply_get_drvdata(x) | 
|  |  | 
|  | static inline int acpi_battery_present(struct acpi_battery *battery) | 
|  | { | 
|  | return battery->device->status.battery_present; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_technology(struct acpi_battery *battery) | 
|  | { | 
|  | if (!strcasecmp("NiCd", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_NiCd; | 
|  | if (!strcasecmp("NiMH", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_NiMH; | 
|  | if (!strcasecmp("LION", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LION; | 
|  | if (!strncasecmp("LI-ION", battery->type, 6)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LION; | 
|  | if (!strcasecmp("LiP", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LIPO; | 
|  | return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_state(struct acpi_battery *battery); | 
|  |  | 
|  | static int acpi_battery_is_charged(struct acpi_battery *battery) | 
|  | { | 
|  | /* charging, discharging, critical low or charge limited */ | 
|  | if (battery->state != 0) | 
|  | return 0; | 
|  |  | 
|  | /* battery not reporting charge */ | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
|  | battery->capacity_now == 0) | 
|  | return 0; | 
|  |  | 
|  | /* good batteries update full_charge as the batteries degrade */ | 
|  | if (battery->full_charge_capacity == battery->capacity_now) | 
|  | return 1; | 
|  |  | 
|  | /* fallback to using design values for broken batteries */ | 
|  | if (battery->design_capacity <= battery->capacity_now) | 
|  | return 1; | 
|  |  | 
|  | /* we don't do any sort of metric based on percentages */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool acpi_battery_is_degraded(struct acpi_battery *battery) | 
|  | { | 
|  | return ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
|  | ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity) && | 
|  | battery->full_charge_capacity < battery->design_capacity; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_handle_discharging(struct acpi_battery *battery) | 
|  | { | 
|  | /* | 
|  | * Some devices wrongly report discharging if the battery's charge level | 
|  | * was above the device's start charging threshold atm the AC adapter | 
|  | * was plugged in and the device thus did not start a new charge cycle. | 
|  | */ | 
|  | if ((battery_ac_is_broken || power_supply_is_system_supplied()) && | 
|  | battery->rate_now == 0) | 
|  | return POWER_SUPPLY_STATUS_NOT_CHARGING; | 
|  |  | 
|  | return POWER_SUPPLY_STATUS_DISCHARGING; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int full_capacity = ACPI_BATTERY_VALUE_UNKNOWN, ret = 0; | 
|  | struct acpi_battery *battery = to_acpi_battery(psy); | 
|  |  | 
|  | if (acpi_battery_present(battery)) { | 
|  | /* run battery update only if it is present */ | 
|  | acpi_battery_get_state(battery); | 
|  | } else if (psp != POWER_SUPPLY_PROP_PRESENT) | 
|  | return -ENODEV; | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_STATUS: | 
|  | if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) | 
|  | val->intval = acpi_battery_handle_discharging(battery); | 
|  | else if (battery->state & ACPI_BATTERY_STATE_CHARGING) | 
|  | val->intval = POWER_SUPPLY_STATUS_CHARGING; | 
|  | else if (battery->state & ACPI_BATTERY_STATE_CHARGE_LIMITING) | 
|  | val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
|  | else if (acpi_battery_is_charged(battery)) | 
|  | val->intval = POWER_SUPPLY_STATUS_FULL; | 
|  | else | 
|  | val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = acpi_battery_present(battery); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TECHNOLOGY: | 
|  | val->intval = acpi_battery_technology(battery); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CYCLE_COUNT: | 
|  | val->intval = battery->cycle_count; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | 
|  | if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->design_voltage * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
|  | if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->voltage_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CURRENT_NOW: | 
|  | case POWER_SUPPLY_PROP_POWER_NOW: | 
|  | if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->rate_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->design_capacity * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL: | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL: | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->full_charge_capacity * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_NOW: | 
|  | case POWER_SUPPLY_PROP_ENERGY_NOW: | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->capacity_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY: | 
|  | if (ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
|  | full_capacity = battery->full_charge_capacity; | 
|  | else if (ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | full_capacity = battery->design_capacity; | 
|  |  | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
|  | full_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->capacity_now * 100/ | 
|  | full_capacity; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY_LEVEL: | 
|  | if (battery->state & ACPI_BATTERY_STATE_CRITICAL) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | 
|  | else if (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
|  | (battery->capacity_now <= battery->alarm)) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | 
|  | else if (acpi_battery_is_charged(battery)) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | 
|  | else | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MODEL_NAME: | 
|  | val->strval = battery->model_number; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MANUFACTURER: | 
|  | val->strval = battery->oem_info; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_SERIAL_NUMBER: | 
|  | val->strval = battery->serial_number; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const enum power_supply_property charge_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static const enum power_supply_property charge_battery_full_cap_broken_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static const enum power_supply_property energy_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_NOW, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static const enum power_supply_property energy_battery_full_cap_broken_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_NOW, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | /* Battery Management */ | 
|  | struct acpi_offsets { | 
|  | size_t offset;		/* offset inside struct acpi_sbs_battery */ | 
|  | u8 mode;		/* int or string? */ | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets state_offsets[] = { | 
|  | {offsetof(struct acpi_battery, state), 0}, | 
|  | {offsetof(struct acpi_battery, rate_now), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_now), 0}, | 
|  | {offsetof(struct acpi_battery, voltage_now), 0}, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets info_offsets[] = { | 
|  | {offsetof(struct acpi_battery, power_unit), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, technology), 0}, | 
|  | {offsetof(struct acpi_battery, design_voltage), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_low), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
|  | {offsetof(struct acpi_battery, model_number), 1}, | 
|  | {offsetof(struct acpi_battery, serial_number), 1}, | 
|  | {offsetof(struct acpi_battery, type), 1}, | 
|  | {offsetof(struct acpi_battery, oem_info), 1}, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets extended_info_offsets[] = { | 
|  | {offsetof(struct acpi_battery, revision), 0}, | 
|  | {offsetof(struct acpi_battery, power_unit), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, technology), 0}, | 
|  | {offsetof(struct acpi_battery, design_voltage), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_low), 0}, | 
|  | {offsetof(struct acpi_battery, cycle_count), 0}, | 
|  | {offsetof(struct acpi_battery, measurement_accuracy), 0}, | 
|  | {offsetof(struct acpi_battery, max_sampling_time), 0}, | 
|  | {offsetof(struct acpi_battery, min_sampling_time), 0}, | 
|  | {offsetof(struct acpi_battery, max_averaging_interval), 0}, | 
|  | {offsetof(struct acpi_battery, min_averaging_interval), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
|  | {offsetof(struct acpi_battery, model_number), 1}, | 
|  | {offsetof(struct acpi_battery, serial_number), 1}, | 
|  | {offsetof(struct acpi_battery, type), 1}, | 
|  | {offsetof(struct acpi_battery, oem_info), 1}, | 
|  | }; | 
|  |  | 
|  | static int extract_package(struct acpi_battery *battery, | 
|  | union acpi_object *package, | 
|  | const struct acpi_offsets *offsets, int num) | 
|  | { | 
|  | int i; | 
|  | union acpi_object *element; | 
|  |  | 
|  | if (package->type != ACPI_TYPE_PACKAGE) | 
|  | return -EFAULT; | 
|  | for (i = 0; i < num; ++i) { | 
|  | if (package->package.count <= i) | 
|  | return -EFAULT; | 
|  | element = &package->package.elements[i]; | 
|  | if (offsets[i].mode) { | 
|  | u8 *ptr = (u8 *)battery + offsets[i].offset; | 
|  | u32 len = MAX_STRING_LENGTH; | 
|  |  | 
|  | switch (element->type) { | 
|  | case ACPI_TYPE_BUFFER: | 
|  | if (len > element->buffer.length + 1) | 
|  | len = element->buffer.length + 1; | 
|  |  | 
|  | fallthrough; | 
|  | case ACPI_TYPE_STRING: | 
|  | strscpy(ptr, element->string.pointer, len); | 
|  |  | 
|  | break; | 
|  | case ACPI_TYPE_INTEGER: | 
|  | strscpy(ptr, (u8 *)&element->integer.value, sizeof(u64) + 1); | 
|  |  | 
|  | break; | 
|  | default: | 
|  | *ptr = 0; /* don't have value */ | 
|  | } | 
|  | } else { | 
|  | int *x = (int *)((u8 *)battery + offsets[i].offset); | 
|  | *x = (element->type == ACPI_TYPE_INTEGER) ? | 
|  | element->integer.value : -1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_status(struct acpi_battery *battery) | 
|  | { | 
|  | if (acpi_bus_get_status(battery->device)) { | 
|  | acpi_handle_info(battery->device->handle, | 
|  | "_STA evaluation failed\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int extract_battery_info(const int use_bix, | 
|  | struct acpi_battery *battery, | 
|  | const struct acpi_buffer *buffer) | 
|  | { | 
|  | int result = -EFAULT; | 
|  |  | 
|  | if (use_bix && battery_bix_broken_package) | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | extended_info_offsets + 1, | 
|  | ARRAY_SIZE(extended_info_offsets) - 1); | 
|  | else if (use_bix) | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | extended_info_offsets, | 
|  | ARRAY_SIZE(extended_info_offsets)); | 
|  | else | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | info_offsets, ARRAY_SIZE(info_offsets)); | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
|  | battery->full_charge_capacity = battery->design_capacity; | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
|  | battery->power_unit && battery->design_voltage) { | 
|  | battery->design_capacity = battery->design_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->full_charge_capacity = battery->full_charge_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->design_capacity_warning = | 
|  | battery->design_capacity_warning * | 
|  | 10000 / battery->design_voltage; | 
|  | /* Curiously, design_capacity_low, unlike the rest of them, | 
|  | *  is correct. | 
|  | */ | 
|  | /* capacity_granularity_* equal 1 on the systems tested, so | 
|  | * it's impossible to tell if they would need an adjustment | 
|  | * or not if their values were higher. | 
|  | */ | 
|  | } | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
|  | battery->capacity_now > battery->full_charge_capacity) | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_info(struct acpi_battery *battery) | 
|  | { | 
|  | const int xinfo = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
|  | int use_bix; | 
|  | int result = -ENODEV; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  |  | 
|  | for (use_bix = xinfo ? 1 : 0; use_bix >= 0; use_bix--) { | 
|  | struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
|  | acpi_status status = AE_ERROR; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_evaluate_object(battery->device->handle, | 
|  | use_bix ? "_BIX":"_BIF", | 
|  | NULL, &buffer); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) { | 
|  | acpi_handle_info(battery->device->handle, | 
|  | "%s evaluation failed: %s\n", | 
|  | use_bix ? "_BIX":"_BIF", | 
|  | acpi_format_exception(status)); | 
|  | } else { | 
|  | result = extract_battery_info(use_bix, | 
|  | battery, | 
|  | &buffer); | 
|  |  | 
|  | kfree(buffer.pointer); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!result && !use_bix && xinfo) | 
|  | pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_state(struct acpi_battery *battery) | 
|  | { | 
|  | int result = 0; | 
|  | acpi_status status = 0; | 
|  | struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  | if (battery->update_time && | 
|  | time_before(jiffies, battery->update_time + | 
|  | msecs_to_jiffies(cache_time))) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_evaluate_object(battery->device->handle, "_BST", | 
|  | NULL, &buffer); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) { | 
|  | acpi_handle_info(battery->device->handle, | 
|  | "_BST evaluation failed: %s", | 
|  | acpi_format_exception(status)); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | result = extract_package(battery, buffer.pointer, | 
|  | state_offsets, ARRAY_SIZE(state_offsets)); | 
|  | battery->update_time = jiffies; | 
|  | kfree(buffer.pointer); | 
|  |  | 
|  | /* For buggy DSDTs that report negative 16-bit values for either | 
|  | * charging or discharging current and/or report 0 as 65536 | 
|  | * due to bad math. | 
|  | */ | 
|  | if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA && | 
|  | battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN && | 
|  | (s16)(battery->rate_now) < 0) { | 
|  | battery->rate_now = abs((s16)battery->rate_now); | 
|  | pr_warn_once(FW_BUG "(dis)charge rate invalid.\n"); | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) | 
|  | && battery->capacity_now >= 0 && battery->capacity_now <= 100) | 
|  | battery->capacity_now = (battery->capacity_now * | 
|  | battery->full_charge_capacity) / 100; | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
|  | battery->power_unit && battery->design_voltage) { | 
|  | battery->capacity_now = battery->capacity_now * | 
|  | 10000 / battery->design_voltage; | 
|  | } | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
|  | battery->capacity_now > battery->full_charge_capacity) | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_set_alarm(struct acpi_battery *battery) | 
|  | { | 
|  | acpi_status status = 0; | 
|  |  | 
|  | if (!acpi_battery_present(battery) || | 
|  | !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_execute_simple_method(battery->device->handle, "_BTP", | 
|  | battery->alarm); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -ENODEV; | 
|  |  | 
|  | acpi_handle_debug(battery->device->handle, "Alarm set to %d\n", | 
|  | battery->alarm); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_init_alarm(struct acpi_battery *battery) | 
|  | { | 
|  | /* See if alarms are supported, and if so, set default */ | 
|  | if (!acpi_has_method(battery->device->handle, "_BTP")) { | 
|  | clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
|  | return 0; | 
|  | } | 
|  | set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
|  | if (!battery->alarm) | 
|  | battery->alarm = battery->design_capacity_warning; | 
|  | return acpi_battery_set_alarm(battery); | 
|  | } | 
|  |  | 
|  | static ssize_t acpi_battery_alarm_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
|  |  | 
|  | return sysfs_emit(buf, "%d\n", battery->alarm * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t acpi_battery_alarm_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned long x; | 
|  | struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
|  |  | 
|  | if (sscanf(buf, "%lu\n", &x) == 1) | 
|  | battery->alarm = x/1000; | 
|  | if (acpi_battery_present(battery)) | 
|  | acpi_battery_set_alarm(battery); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct device_attribute alarm_attr = { | 
|  | .attr = {.name = "alarm", .mode = 0644}, | 
|  | .show = acpi_battery_alarm_show, | 
|  | .store = acpi_battery_alarm_store, | 
|  | }; | 
|  |  | 
|  | static struct attribute *acpi_battery_attrs[] = { | 
|  | &alarm_attr.attr, | 
|  | NULL | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(acpi_battery); | 
|  |  | 
|  | /* | 
|  | * The Battery Hooking API | 
|  | * | 
|  | * This API is used inside other drivers that need to expose | 
|  | * platform-specific behaviour within the generic driver in a | 
|  | * generic way. | 
|  | * | 
|  | */ | 
|  |  | 
|  | static LIST_HEAD(acpi_battery_list); | 
|  | static LIST_HEAD(battery_hook_list); | 
|  | static DEFINE_MUTEX(hook_mutex); | 
|  |  | 
|  | static void battery_hook_unregister_unlocked(struct acpi_battery_hook *hook) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | /* | 
|  | * In order to remove a hook, we first need to | 
|  | * de-register all the batteries that are registered. | 
|  | */ | 
|  | list_for_each_entry(battery, &acpi_battery_list, list) { | 
|  | if (!hook->remove_battery(battery->bat, hook)) | 
|  | power_supply_changed(battery->bat); | 
|  | } | 
|  | list_del_init(&hook->list); | 
|  |  | 
|  | pr_info("extension unregistered: %s\n", hook->name); | 
|  | } | 
|  |  | 
|  | void battery_hook_unregister(struct acpi_battery_hook *hook) | 
|  | { | 
|  | mutex_lock(&hook_mutex); | 
|  | /* | 
|  | * Ignore already unregistered battery hooks. This might happen | 
|  | * if a battery hook was previously unloaded due to an error when | 
|  | * adding a new battery. | 
|  | */ | 
|  | if (!list_empty(&hook->list)) | 
|  | battery_hook_unregister_unlocked(hook); | 
|  |  | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(battery_hook_unregister); | 
|  |  | 
|  | void battery_hook_register(struct acpi_battery_hook *hook) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | list_add(&hook->list, &battery_hook_list); | 
|  | /* | 
|  | * Now that the driver is registered, we need | 
|  | * to notify the hook that a battery is available | 
|  | * for each battery, so that the driver may add | 
|  | * its attributes. | 
|  | */ | 
|  | list_for_each_entry(battery, &acpi_battery_list, list) { | 
|  | if (hook->add_battery(battery->bat, hook)) { | 
|  | /* | 
|  | * If a add-battery returns non-zero, | 
|  | * the registration of the extension has failed, | 
|  | * and we will not add it to the list of loaded | 
|  | * hooks. | 
|  | */ | 
|  | pr_err("extension failed to load: %s", hook->name); | 
|  | battery_hook_unregister_unlocked(hook); | 
|  | goto end; | 
|  | } | 
|  |  | 
|  | power_supply_changed(battery->bat); | 
|  | } | 
|  | pr_info("new extension: %s\n", hook->name); | 
|  | end: | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(battery_hook_register); | 
|  |  | 
|  | static void devm_battery_hook_unregister(void *data) | 
|  | { | 
|  | struct acpi_battery_hook *hook = data; | 
|  |  | 
|  | battery_hook_unregister(hook); | 
|  | } | 
|  |  | 
|  | int devm_battery_hook_register(struct device *dev, struct acpi_battery_hook *hook) | 
|  | { | 
|  | battery_hook_register(hook); | 
|  |  | 
|  | return devm_add_action_or_reset(dev, devm_battery_hook_unregister, hook); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(devm_battery_hook_register); | 
|  |  | 
|  | /* | 
|  | * This function gets called right after the battery sysfs | 
|  | * attributes have been added, so that the drivers that | 
|  | * define custom sysfs attributes can add their own. | 
|  | */ | 
|  | static void battery_hook_add_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct acpi_battery_hook *hook_node, *tmp; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | INIT_LIST_HEAD(&battery->list); | 
|  | list_add(&battery->list, &acpi_battery_list); | 
|  | /* | 
|  | * Since we added a new battery to the list, we need to | 
|  | * iterate over the hooks and call add_battery for each | 
|  | * hook that was registered. This usually happens | 
|  | * when a battery gets hotplugged or initialized | 
|  | * during the battery module initialization. | 
|  | */ | 
|  | list_for_each_entry_safe(hook_node, tmp, &battery_hook_list, list) { | 
|  | if (hook_node->add_battery(battery->bat, hook_node)) { | 
|  | /* | 
|  | * The notification of the extensions has failed, to | 
|  | * prevent further errors we will unload the extension. | 
|  | */ | 
|  | pr_err("error in extension, unloading: %s", | 
|  | hook_node->name); | 
|  | battery_hook_unregister_unlocked(hook_node); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static void battery_hook_remove_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct acpi_battery_hook *hook; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | /* | 
|  | * Before removing the hook, we need to remove all | 
|  | * custom attributes from the battery. | 
|  | */ | 
|  | list_for_each_entry(hook, &battery_hook_list, list) { | 
|  | hook->remove_battery(battery->bat, hook); | 
|  | } | 
|  | /* Then, just remove the battery from the list */ | 
|  | list_del(&battery->list); | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static void __exit battery_hook_exit(void) | 
|  | { | 
|  | struct acpi_battery_hook *hook; | 
|  | struct acpi_battery_hook *ptr; | 
|  | /* | 
|  | * At this point, the acpi_bus_unregister_driver() | 
|  | * has called remove for all batteries. We just | 
|  | * need to remove the hooks. | 
|  | */ | 
|  | list_for_each_entry_safe(hook, ptr, &battery_hook_list, list) { | 
|  | battery_hook_unregister(hook); | 
|  | } | 
|  | mutex_destroy(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static int sysfs_add_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct power_supply_config psy_cfg = { | 
|  | .drv_data = battery, | 
|  | .attr_grp = acpi_battery_groups, | 
|  | }; | 
|  | bool full_cap_broken = false; | 
|  |  | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
|  | !ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | full_cap_broken = true; | 
|  |  | 
|  | if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) { | 
|  | if (full_cap_broken) { | 
|  | battery->bat_desc.properties = | 
|  | charge_battery_full_cap_broken_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(charge_battery_full_cap_broken_props); | 
|  | } else { | 
|  | battery->bat_desc.properties = charge_battery_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(charge_battery_props); | 
|  | } | 
|  | } else { | 
|  | if (full_cap_broken) { | 
|  | battery->bat_desc.properties = | 
|  | energy_battery_full_cap_broken_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(energy_battery_full_cap_broken_props); | 
|  | } else { | 
|  | battery->bat_desc.properties = energy_battery_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(energy_battery_props); | 
|  | } | 
|  | } | 
|  |  | 
|  | battery->bat_desc.name = acpi_device_bid(battery->device); | 
|  | battery->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; | 
|  | battery->bat_desc.get_property = acpi_battery_get_property; | 
|  |  | 
|  | battery->bat = power_supply_register_no_ws(&battery->device->dev, | 
|  | &battery->bat_desc, &psy_cfg); | 
|  |  | 
|  | if (IS_ERR(battery->bat)) { | 
|  | int result = PTR_ERR(battery->bat); | 
|  |  | 
|  | battery->bat = NULL; | 
|  | return result; | 
|  | } | 
|  | battery_hook_add_battery(battery); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sysfs_remove_battery(struct acpi_battery *battery) | 
|  | { | 
|  | mutex_lock(&battery->sysfs_lock); | 
|  | if (!battery->bat) { | 
|  | mutex_unlock(&battery->sysfs_lock); | 
|  | return; | 
|  | } | 
|  | battery_hook_remove_battery(battery); | 
|  | power_supply_unregister(battery->bat); | 
|  | battery->bat = NULL; | 
|  | mutex_unlock(&battery->sysfs_lock); | 
|  | } | 
|  |  | 
|  | static void find_battery(const struct dmi_header *dm, void *private) | 
|  | { | 
|  | struct acpi_battery *battery = (struct acpi_battery *)private; | 
|  | /* Note: the hardcoded offsets below have been extracted from | 
|  | * the source code of dmidecode. | 
|  | */ | 
|  | if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { | 
|  | const u8 *dmi_data = (const u8 *)(dm + 1); | 
|  | int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); | 
|  |  | 
|  | if (dm->length >= 18) | 
|  | dmi_capacity *= dmi_data[17]; | 
|  | if (battery->design_capacity * battery->design_voltage / 1000 | 
|  | != dmi_capacity && | 
|  | battery->design_capacity * 10 == dmi_capacity) | 
|  | set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | &battery->flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * According to the ACPI spec, some kinds of primary batteries can | 
|  | * report percentage battery remaining capacity directly to OS. | 
|  | * In this case, it reports the Last Full Charged Capacity == 100 | 
|  | * and BatteryPresentRate == 0xFFFFFFFF. | 
|  | * | 
|  | * Now we found some battery reports percentage remaining capacity | 
|  | * even if it's rechargeable. | 
|  | * https://bugzilla.kernel.org/show_bug.cgi?id=15979 | 
|  | * | 
|  | * Handle this correctly so that they won't break userspace. | 
|  | */ | 
|  | static void acpi_battery_quirks(struct acpi_battery *battery) | 
|  | { | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (battery->full_charge_capacity == 100 && | 
|  | battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && | 
|  | battery->capacity_now >= 0 && battery->capacity_now <= 100) { | 
|  | set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); | 
|  | battery->full_charge_capacity = battery->design_capacity; | 
|  | battery->capacity_now = (battery->capacity_now * | 
|  | battery->full_charge_capacity) / 100; | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { | 
|  | const char *s; | 
|  |  | 
|  | s = dmi_get_system_info(DMI_PRODUCT_VERSION); | 
|  | if (s && !strncasecmp(s, "ThinkPad", 8)) { | 
|  | dmi_walk(find_battery, battery); | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | &battery->flags) && | 
|  | battery->design_voltage) { | 
|  | battery->design_capacity = | 
|  | battery->design_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->full_charge_capacity = | 
|  | battery->full_charge_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->design_capacity_warning = | 
|  | battery->design_capacity_warning * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->capacity_now = battery->capacity_now * | 
|  | 10000 / battery->design_voltage; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (acpi_battery_is_degraded(battery) && | 
|  | battery->capacity_now > battery->full_charge_capacity) { | 
|  | set_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags); | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int acpi_battery_update(struct acpi_battery *battery, bool resume) | 
|  | { | 
|  | int result = acpi_battery_get_status(battery); | 
|  |  | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) { | 
|  | sysfs_remove_battery(battery); | 
|  | battery->update_time = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (resume) | 
|  | return 0; | 
|  |  | 
|  | if (!battery->update_time) { | 
|  | result = acpi_battery_get_info(battery); | 
|  | if (result) | 
|  | return result; | 
|  | acpi_battery_init_alarm(battery); | 
|  | } | 
|  |  | 
|  | result = acpi_battery_get_state(battery); | 
|  | if (result) | 
|  | return result; | 
|  | acpi_battery_quirks(battery); | 
|  |  | 
|  | if (!battery->bat) { | 
|  | result = sysfs_add_battery(battery); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wakeup the system if battery is critical low | 
|  | * or lower than the alarm level | 
|  | */ | 
|  | if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || | 
|  | (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
|  | (battery->capacity_now <= battery->alarm))) | 
|  | acpi_pm_wakeup_event(&battery->device->dev); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void acpi_battery_refresh(struct acpi_battery *battery) | 
|  | { | 
|  | int power_unit; | 
|  |  | 
|  | if (!battery->bat) | 
|  | return; | 
|  |  | 
|  | power_unit = battery->power_unit; | 
|  |  | 
|  | acpi_battery_get_info(battery); | 
|  |  | 
|  | if (power_unit == battery->power_unit) | 
|  | return; | 
|  |  | 
|  | /* The battery has changed its reporting units. */ | 
|  | sysfs_remove_battery(battery); | 
|  | sysfs_add_battery(battery); | 
|  | } | 
|  |  | 
|  | /* Driver Interface */ | 
|  | static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) | 
|  | { | 
|  | struct acpi_device *device = data; | 
|  | struct acpi_battery *battery = acpi_driver_data(device); | 
|  | struct power_supply *old; | 
|  |  | 
|  | if (!battery) | 
|  | return; | 
|  | old = battery->bat; | 
|  | /* | 
|  | * On Acer Aspire V5-573G notifications are sometimes triggered too | 
|  | * early. For example, when AC is unplugged and notification is | 
|  | * triggered, battery state is still reported as "Full", and changes to | 
|  | * "Discharging" only after short delay, without any notification. | 
|  | */ | 
|  | if (battery_notification_delay_ms > 0) | 
|  | msleep(battery_notification_delay_ms); | 
|  | if (event == ACPI_BATTERY_NOTIFY_INFO) | 
|  | acpi_battery_refresh(battery); | 
|  | acpi_battery_update(battery, false); | 
|  | acpi_bus_generate_netlink_event(device->pnp.device_class, | 
|  | dev_name(&device->dev), event, | 
|  | acpi_battery_present(battery)); | 
|  | acpi_notifier_call_chain(device, event, acpi_battery_present(battery)); | 
|  | /* acpi_battery_update could remove power_supply object */ | 
|  | if (old && battery->bat) | 
|  | power_supply_changed(battery->bat); | 
|  | } | 
|  |  | 
|  | static int battery_notify(struct notifier_block *nb, | 
|  | unsigned long mode, void *_unused) | 
|  | { | 
|  | struct acpi_battery *battery = container_of(nb, struct acpi_battery, | 
|  | pm_nb); | 
|  | int result; | 
|  |  | 
|  | switch (mode) { | 
|  | case PM_POST_HIBERNATION: | 
|  | case PM_POST_SUSPEND: | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  | if (battery->bat) { | 
|  | acpi_battery_refresh(battery); | 
|  | } else { | 
|  | result = acpi_battery_get_info(battery); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | result = sysfs_add_battery(battery); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | acpi_battery_init_alarm(battery); | 
|  | acpi_battery_get_state(battery); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_bix_broken_package_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_bix_broken_package = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_notification_delay_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_notification_delay_ms = 1000; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_ac_is_broken_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_ac_is_broken = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id bat_dmi_table[] __initconst = { | 
|  | { | 
|  | /* NEC LZ750/LS */ | 
|  | .callback = battery_bix_broken_package_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "PC-LZ750LS"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Acer Aspire V5-573G */ | 
|  | .callback = battery_notification_delay_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Acer"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Point of View mobii wintab p800w */ | 
|  | .callback = battery_ac_is_broken_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), | 
|  | DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), | 
|  | /* Above matches are too generic, add bios-date match */ | 
|  | DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Microsoft Surface Go 3 */ | 
|  | .callback = battery_notification_delay_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), | 
|  | }, | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Some machines'(E,G Lenovo Z480) ECs are not stable | 
|  | * during boot up and this causes battery driver fails to be | 
|  | * probed due to failure of getting battery information | 
|  | * from EC sometimes. After several retries, the operation | 
|  | * may work. So add retry code here and 20ms sleep between | 
|  | * every retries. | 
|  | */ | 
|  | static int acpi_battery_update_retry(struct acpi_battery *battery) | 
|  | { | 
|  | int retry, ret; | 
|  |  | 
|  | for (retry = 5; retry; retry--) { | 
|  | ret = acpi_battery_update(battery, false); | 
|  | if (!ret) | 
|  | break; | 
|  |  | 
|  | msleep(20); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_add(struct acpi_device *device) | 
|  | { | 
|  | int result = 0; | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | if (!device) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (device->dep_unmet) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL); | 
|  | if (!battery) | 
|  | return -ENOMEM; | 
|  | battery->device = device; | 
|  | strscpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME); | 
|  | strscpy(acpi_device_class(device), ACPI_BATTERY_CLASS); | 
|  | device->driver_data = battery; | 
|  | mutex_init(&battery->lock); | 
|  | mutex_init(&battery->sysfs_lock); | 
|  | if (acpi_has_method(battery->device->handle, "_BIX")) | 
|  | set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
|  |  | 
|  | result = acpi_battery_update_retry(battery); | 
|  | if (result) | 
|  | goto fail; | 
|  |  | 
|  | pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device), | 
|  | device->status.battery_present ? "present" : "absent"); | 
|  |  | 
|  | battery->pm_nb.notifier_call = battery_notify; | 
|  | register_pm_notifier(&battery->pm_nb); | 
|  |  | 
|  | device_init_wakeup(&device->dev, 1); | 
|  |  | 
|  | result = acpi_dev_install_notify_handler(device, ACPI_ALL_NOTIFY, | 
|  | acpi_battery_notify, device); | 
|  | if (result) | 
|  | goto fail_pm; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_pm: | 
|  | device_init_wakeup(&device->dev, 0); | 
|  | unregister_pm_notifier(&battery->pm_nb); | 
|  | fail: | 
|  | sysfs_remove_battery(battery); | 
|  | mutex_destroy(&battery->lock); | 
|  | mutex_destroy(&battery->sysfs_lock); | 
|  | kfree(battery); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void acpi_battery_remove(struct acpi_device *device) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | if (!device || !acpi_driver_data(device)) | 
|  | return; | 
|  |  | 
|  | battery = acpi_driver_data(device); | 
|  |  | 
|  | acpi_dev_remove_notify_handler(device, ACPI_ALL_NOTIFY, | 
|  | acpi_battery_notify); | 
|  |  | 
|  | device_init_wakeup(&device->dev, 0); | 
|  | unregister_pm_notifier(&battery->pm_nb); | 
|  | sysfs_remove_battery(battery); | 
|  |  | 
|  | mutex_destroy(&battery->lock); | 
|  | mutex_destroy(&battery->sysfs_lock); | 
|  | kfree(battery); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | /* this is needed to learn about changes made in suspended state */ | 
|  | static int acpi_battery_resume(struct device *dev) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  |  | 
|  | battery = acpi_driver_data(to_acpi_device(dev)); | 
|  | if (!battery) | 
|  | return -EINVAL; | 
|  |  | 
|  | battery->update_time = 0; | 
|  | acpi_battery_update(battery, true); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define acpi_battery_resume NULL | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); | 
|  |  | 
|  | static struct acpi_driver acpi_battery_driver = { | 
|  | .name = "battery", | 
|  | .class = ACPI_BATTERY_CLASS, | 
|  | .ids = battery_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_battery_add, | 
|  | .remove = acpi_battery_remove, | 
|  | }, | 
|  | .drv.pm = &acpi_battery_pm, | 
|  | .drv.probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
|  | }; | 
|  |  | 
|  | static int __init acpi_battery_init(void) | 
|  | { | 
|  | if (acpi_disabled || acpi_quirk_skip_acpi_ac_and_battery()) | 
|  | return -ENODEV; | 
|  |  | 
|  | dmi_check_system(bat_dmi_table); | 
|  |  | 
|  | return acpi_bus_register_driver(&acpi_battery_driver); | 
|  | } | 
|  |  | 
|  | static void __exit acpi_battery_exit(void) | 
|  | { | 
|  | acpi_bus_unregister_driver(&acpi_battery_driver); | 
|  | battery_hook_exit(); | 
|  | } | 
|  |  | 
|  | module_init(acpi_battery_init); | 
|  | module_exit(acpi_battery_exit); |