| // SPDX-License-Identifier: GPL-2.0-only | |
| #include <linux/phy.h> | |
| #include <linux/ethtool_netlink.h> | |
| #include "common.h" | |
| #include "netlink.h" | |
| struct plca_req_info { | |
| struct ethnl_req_info base; | |
| }; | |
| struct plca_reply_data { | |
| struct ethnl_reply_data base; | |
| struct phy_plca_cfg plca_cfg; | |
| struct phy_plca_status plca_st; | |
| }; | |
| // Helpers ------------------------------------------------------------------ // | |
| #define PLCA_REPDATA(__reply_base) \ | |
| container_of(__reply_base, struct plca_reply_data, base) | |
| // PLCA get configuration message ------------------------------------------- // | |
| const struct nla_policy ethnl_plca_get_cfg_policy[] = { | |
| [ETHTOOL_A_PLCA_HEADER] = | |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), | |
| }; | |
| static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, | |
| bool *mod) | |
| { | |
| const struct nlattr *attr = tb[attrid]; | |
| if (!attr || | |
| WARN_ON_ONCE(attrid >= ARRAY_SIZE(ethnl_plca_set_cfg_policy))) | |
| return; | |
| switch (ethnl_plca_set_cfg_policy[attrid].type) { | |
| case NLA_U8: | |
| *dst = nla_get_u8(attr); | |
| break; | |
| case NLA_U32: | |
| *dst = nla_get_u32(attr); | |
| break; | |
| default: | |
| WARN_ON_ONCE(1); | |
| } | |
| *mod = true; | |
| } | |
| static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, | |
| struct ethnl_reply_data *reply_base, | |
| const struct genl_info *info) | |
| { | |
| struct plca_reply_data *data = PLCA_REPDATA(reply_base); | |
| struct net_device *dev = reply_base->dev; | |
| const struct ethtool_phy_ops *ops; | |
| struct nlattr **tb = info->attrs; | |
| struct phy_device *phydev; | |
| int ret; | |
| phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, | |
| info->extack); | |
| // check that the PHY device is available and connected | |
| if (IS_ERR_OR_NULL(phydev)) { | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| // note: rtnl_lock is held already by ethnl_default_doit | |
| ops = ethtool_phy_ops; | |
| if (!ops || !ops->get_plca_cfg) { | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| ret = ethnl_ops_begin(dev); | |
| if (ret < 0) | |
| goto out; | |
| memset(&data->plca_cfg, 0xff, | |
| sizeof_field(struct plca_reply_data, plca_cfg)); | |
| ret = ops->get_plca_cfg(phydev, &data->plca_cfg); | |
| ethnl_ops_complete(dev); | |
| out: | |
| return ret; | |
| } | |
| static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base, | |
| const struct ethnl_reply_data *reply_base) | |
| { | |
| return nla_total_size(sizeof(u16)) + /* _VERSION */ | |
| nla_total_size(sizeof(u8)) + /* _ENABLED */ | |
| nla_total_size(sizeof(u32)) + /* _NODE_CNT */ | |
| nla_total_size(sizeof(u32)) + /* _NODE_ID */ | |
| nla_total_size(sizeof(u32)) + /* _TO_TIMER */ | |
| nla_total_size(sizeof(u32)) + /* _BURST_COUNT */ | |
| nla_total_size(sizeof(u32)); /* _BURST_TIMER */ | |
| } | |
| static int plca_get_cfg_fill_reply(struct sk_buff *skb, | |
| const struct ethnl_req_info *req_base, | |
| const struct ethnl_reply_data *reply_base) | |
| { | |
| const struct plca_reply_data *data = PLCA_REPDATA(reply_base); | |
| const struct phy_plca_cfg *plca = &data->plca_cfg; | |
| if ((plca->version >= 0 && | |
| nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) || | |
| (plca->enabled >= 0 && | |
| nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) || | |
| (plca->node_id >= 0 && | |
| nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) || | |
| (plca->node_cnt >= 0 && | |
| nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) || | |
| (plca->to_tmr >= 0 && | |
| nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) || | |
| (plca->burst_cnt >= 0 && | |
| nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) || | |
| (plca->burst_tmr >= 0 && | |
| nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr))) | |
| return -EMSGSIZE; | |
| return 0; | |
| }; | |
| // PLCA set configuration message ------------------------------------------- // | |
| const struct nla_policy ethnl_plca_set_cfg_policy[] = { | |
| [ETHTOOL_A_PLCA_HEADER] = | |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), | |
| [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), | |
| [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), | |
| [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), | |
| [ETHTOOL_A_PLCA_TO_TMR] = NLA_POLICY_MAX(NLA_U32, 255), | |
| [ETHTOOL_A_PLCA_BURST_CNT] = NLA_POLICY_MAX(NLA_U32, 255), | |
| [ETHTOOL_A_PLCA_BURST_TMR] = NLA_POLICY_MAX(NLA_U32, 255), | |
| }; | |
| static int | |
| ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) | |
| { | |
| const struct ethtool_phy_ops *ops; | |
| struct nlattr **tb = info->attrs; | |
| struct phy_plca_cfg plca_cfg; | |
| struct phy_device *phydev; | |
| bool mod = false; | |
| int ret; | |
| phydev = ethnl_req_get_phydev(req_info, tb, ETHTOOL_A_PLCA_HEADER, | |
| info->extack); | |
| // check that the PHY device is available and connected | |
| if (IS_ERR_OR_NULL(phydev)) | |
| return -EOPNOTSUPP; | |
| ops = ethtool_phy_ops; | |
| if (!ops || !ops->set_plca_cfg) | |
| return -EOPNOTSUPP; | |
| memset(&plca_cfg, 0xff, sizeof(plca_cfg)); | |
| plca_update_sint(&plca_cfg.enabled, tb, ETHTOOL_A_PLCA_ENABLED, &mod); | |
| plca_update_sint(&plca_cfg.node_id, tb, ETHTOOL_A_PLCA_NODE_ID, &mod); | |
| plca_update_sint(&plca_cfg.node_cnt, tb, ETHTOOL_A_PLCA_NODE_CNT, &mod); | |
| plca_update_sint(&plca_cfg.to_tmr, tb, ETHTOOL_A_PLCA_TO_TMR, &mod); | |
| plca_update_sint(&plca_cfg.burst_cnt, tb, ETHTOOL_A_PLCA_BURST_CNT, | |
| &mod); | |
| plca_update_sint(&plca_cfg.burst_tmr, tb, ETHTOOL_A_PLCA_BURST_TMR, | |
| &mod); | |
| if (!mod) | |
| return 0; | |
| ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); | |
| return ret < 0 ? ret : 1; | |
| } | |
| const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { | |
| .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG, | |
| .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY, | |
| .hdr_attr = ETHTOOL_A_PLCA_HEADER, | |
| .req_info_size = sizeof(struct plca_req_info), | |
| .reply_data_size = sizeof(struct plca_reply_data), | |
| .prepare_data = plca_get_cfg_prepare_data, | |
| .reply_size = plca_get_cfg_reply_size, | |
| .fill_reply = plca_get_cfg_fill_reply, | |
| .set = ethnl_set_plca, | |
| .set_ntf_cmd = ETHTOOL_MSG_PLCA_NTF, | |
| }; | |
| // PLCA get status message -------------------------------------------------- // | |
| const struct nla_policy ethnl_plca_get_status_policy[] = { | |
| [ETHTOOL_A_PLCA_HEADER] = | |
| NLA_POLICY_NESTED(ethnl_header_policy_phy), | |
| }; | |
| static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, | |
| struct ethnl_reply_data *reply_base, | |
| const struct genl_info *info) | |
| { | |
| struct plca_reply_data *data = PLCA_REPDATA(reply_base); | |
| struct net_device *dev = reply_base->dev; | |
| const struct ethtool_phy_ops *ops; | |
| struct nlattr **tb = info->attrs; | |
| struct phy_device *phydev; | |
| int ret; | |
| phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, | |
| info->extack); | |
| // check that the PHY device is available and connected | |
| if (IS_ERR_OR_NULL(phydev)) { | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| // note: rtnl_lock is held already by ethnl_default_doit | |
| ops = ethtool_phy_ops; | |
| if (!ops || !ops->get_plca_status) { | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| ret = ethnl_ops_begin(dev); | |
| if (ret < 0) | |
| goto out; | |
| memset(&data->plca_st, 0xff, | |
| sizeof_field(struct plca_reply_data, plca_st)); | |
| ret = ops->get_plca_status(phydev, &data->plca_st); | |
| ethnl_ops_complete(dev); | |
| out: | |
| return ret; | |
| } | |
| static int plca_get_status_reply_size(const struct ethnl_req_info *req_base, | |
| const struct ethnl_reply_data *reply_base) | |
| { | |
| return nla_total_size(sizeof(u8)); /* _STATUS */ | |
| } | |
| static int plca_get_status_fill_reply(struct sk_buff *skb, | |
| const struct ethnl_req_info *req_base, | |
| const struct ethnl_reply_data *reply_base) | |
| { | |
| const struct plca_reply_data *data = PLCA_REPDATA(reply_base); | |
| const u8 status = data->plca_st.pst; | |
| if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status)) | |
| return -EMSGSIZE; | |
| return 0; | |
| }; | |
| const struct ethnl_request_ops ethnl_plca_status_request_ops = { | |
| .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS, | |
| .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, | |
| .hdr_attr = ETHTOOL_A_PLCA_HEADER, | |
| .req_info_size = sizeof(struct plca_req_info), | |
| .reply_data_size = sizeof(struct plca_reply_data), | |
| .prepare_data = plca_get_status_prepare_data, | |
| .reply_size = plca_get_status_reply_size, | |
| .fill_reply = plca_get_status_fill_reply, | |
| }; |